Municipal Administration Department Tender

Provoding, laying, spreading and compacting graded HBT (Trap) crushed stone aggregate to Wet Mix Macadam Specification (5th Revision) as per table 400.13 including cost of all materials including premixing the material with water at OMC in mechanical mixer(Pug Mill) carriage of mixed material by tipper to site laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100 KN weight to achive the disired density as directed by the Engineer-in-charge and as per MORT&H specification406 (5th Revision) for finished item of work,Excluding seignorage charges.

Construction of unreinforced plain cement concrete pavemnt, thickness as per design over a prepared subbase, with 43 grade cement or any other type as per clause 1501.22 M30 grade course and fine agregates confirming to IS:383 maximum size of course agregated not exceeding 25mm mixed in a concrete mixer of not less than 0.2cum capacityand appropriate weigh batcher using approved mix design, laid in approved fixed side form work ( laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing) spreading the concrete with shovels, rakes, compacted using plate vibrators and finished in continuos operation including provision of contraction and expansion, construction joints and admixtures as approved, curing of concrete slabs for 21 days, curing cmpound(where specified) and water finishing to lines and grade as per drawing and technical specifications clause 1501. Note: Payment will be released only after satisfactory core results of the concrete strength for 28 days as per IS Code

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH