Andhra Pradesh Township And Infrastructure Development Corporation Tender
... More
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Andhra Pradesh Township And Infrastructure Development Corporation - APTIDCO Tender
Civil And Construction
Opening Date2 Feb 2022
Closing Date14 Mar 2022
Tender Amount₹ 34,15,58,065
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
475338Bid Award Id
ViewTender No
02/APTIDCO/KNL/2021-22, DT.30-01-2022Tender Authority
Andhra Pradesh Township And Infrastructure Development Corporation ViewPurchaser Address
-Website
http://https://www.aptidco.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
S1;VRCC. M20 grade design mix concrete corresponding to IS-456 using WEIGH BATCHER / MIXER with 20mm and 12.50mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of worktt.,for GLSR TOP DOME SLAB.
1.62
-
25376.63
... More
S1;RCC M20 grade design mix concrete corresponding to IS-456 using BATCHING PLANT at site with stone aggregate of 20mm & 12.5mm nominal size hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, centering charges such as Steel Scaffolding Pipes, Jack Props, Steel Centering Plates, etc., mixing concrete, pumping of concrete,laying , levelling,curing etc., as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept.,for LINTELS.
0.07
-
800.53
... More
S1;Plastering 12mm thick in Single Coat in CM(1:4)Prop. with sponge finishing including cost and conveyance of all materials and water to site of work and all operational, incidental charges, scaffolding charges, hacking surface and all labour charges, curing etc., complete for finished item of work to the required strength as directed by the dept., for INTERNAL WALLS and EXTERNAL WALLS..
64.62
-
22935.51
... More
S1;Lowering and keeping in position of 100 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
16
-
3202.24
... More
S1;Formation of embankment with 50% of Gravel and 50% Of Sand and Spreading in uniform layers sectioning and consolidation with Static Road Roller to meet requirement of table 300-2 of MORT&H, including all hire and operational charges of T&P and seigniorage charges etc., complete for finished item of work as MORT&H specification 395 (4th revision) (Payment will be made based on level for finished item of work.)
511.88
-
308443.53
... More
S1;Supply and delivery of Bolts & Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values. ( No.of Bolts for each valve 8 Nos. and total weight of Bolts 1.50 Kg./8 Nos.)
13.5
-
1702.52
... More
S1;Lowering, Laying and Jointing of 200mm Dia. DI Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
-
-
-
... More
S1;P.C.C. work of mix M15 Prop. 40 mm graed graded hard granite machine crushed metal incluidng cost and conveyance of all materials and water to work site and all labour charges, , laying, curing etc., complete for Drain side walls.(1:2.5:5)
984.1
-
7524733.67
... More
S1;Supply and delivery of D.I. D/F Scover Valves of 100 mm Dia. conforming to IS 14846/2000 with amendments No.1 &2 heavy duty with D.I grade FG 260 as per IS 210.Two coats of primer suitable for epozy paints finish shall be applied to all metal surface and finally two coats of Epoxy paint.The valve shall be tested for colsed end test against Hydrostatic test requirement of type P.N.I including cost and conveyance charges to work site loading & unloading and all other connected taxes etc., complete for finished item of work.
2
-
28344.68
... More
S1;Supplying and fixing of 25mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows,tees,couplings,nipples,plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for Sump Railings.
105
-
32209.8
... More
S1;Construction of 904.0 m (3'-0")Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part-I-1986 with CM(1:6)Prop. Fly-Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1:3)Prop. 1/2" thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3'-0") in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.(FOR Valve Pits)
18
-
122090.76
... More
S1;180mm dia. PVC Casing pipe perforation charge
305
-
104310
... More
S1;Supply & Fixing of 180mm dia. PVC Bore Cap
5
-
1575
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Ordinary Rock)
112.86
-
16557.04
... More
S1;Drilling of borewells by down the hole hammer drilling to a finished dia of 165 mm (6.5") in all formations suitable for down the hole hammer drilling such as medium hard rock to hard rock formation, all consolidated formation etc., and drilling in over burden to dia not less than 200 mm etc., including the insertion of casing pipe to a depth of hard rock strata wiht coupling, cap & any other relevent materials required upt o the depth as desired by the department. Transportation of drilling rigs and supporting vehicles and including bore development flushing the bore well at an pressure of 7 Kg/Cm2 (150 PSI) conducting yield test, charges all other consumables materials and all other charges required in fixation of casing pipe complete all done to the satisfaction of the department and as stipulated in the technical conditions enclosed to this schedule for any where in three R.W.S divisions in anantapur district, excluding the cost of 175 mm dia MS casing pipes class II/PVC casing pipe of 180 mm dia OD 6 Kg cm2 as per IS
750
-
255000
... More
S1;Manufacture, Supplying and delivery of 160mm Dia. HDPE Pipe of Pressure 8.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
350
-
253305.5
... More
S1;Manufacture, Supplying and delivery of 160mm Dia. HDPE TEES conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
2
-
3503.88
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Hard Rock Blasting Prohibited)
75.24
-
54680.65
... More
S1;Painting to new walls with snow cem or other equal and approved water proof cement paint 2 coats over priming coat with approved exterior grade cement making 3 coats all colours including cost and conveyance of all materials, labour charges etc; complete for finished item of work.
64.62
-
14887.99
... More
S1;PCC(1:4:8)Prop.with 40mm guage graded hard broken granite machine crushed metal including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges for laying, tamping, curing machine mixing, seigniorage etc., complete for Bed of Culverts.
4.55
-
17458.85
... More
S1;CULVERTS Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Culverts.
9.75
-
1129.25
... More
S1;Supply and delivery of 50 mm dia Gunmetal gate valve (GM Peet) as per IS-778 Class-I Indian make heavey type
106
-
398147.66
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Ordinary Rock)
150.48
-
22076.05
... More
S1;HDPE PIPES Manufacture, Supply & Delivery of Centrifugally Cast (Spun) Ductile Iron pressure pipes for water, gas and Sewage with Socket Spigot Ends Confirming to 8329- 2000 in standard working lengths of 4, 5, 5.5 & 6 m for classification K9 and K7 suitable for push - on joint (Rubber Gasket) Dejointing) with cement mortar lining inside the pipes with Outside Zinc Coating Rtaes are Exfactory excluding transporation, taxes and duties
250
-
490247.5
... More
S1;VRCC M20 grade design mix concrete corresponding to IS-456 using BATCHING PLANT at site with stone aggregate of 20mm & 12.5mm nominal size hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, centering charges such as Steel Scaffolding Pipes, Jack Props, Steel Centering Plates, etc., mixing concrete, pumping of concrete,laying , levelling, vibrating with vibrator, curing etc., as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the department for VRCC COLUMNS.
0.92
-
10937.11
... More
S1;Construction of 904.0 m (3'-0")Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part-I-1986 with CM(1:6)Prop. Fly-Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1:3)Prop. 1/2" thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3'-0") in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.(FOR Valve Pits)
22
-
149222.04
... More
S1;Manufacture, Supplying and delivery of 200mm Dia. M.S. FLANGES for jointing conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
4
-
2785.84
... More
S1;Labour charges for jointing DI pipes and valves with Double flanged ends including boring the main threading the bore and fixing nipple etc., excluding the cost of rubber insertions, bolts & nuts, Air Valves & Flanged tail piece etc., and including cost and conveyance of all materials to site of wo and all other chrges etc.,complete for 80mm Dia. Air Valve.
2
-
693.94
... More
S1;Geological Survey charges excluding taxes for Plain Area
15
-
19500
... More
S1;Filling with SAND intrenches sides of Foundations and Basements with initial lead in layeing not excuding 15cms thick consolidating each deposited layer by watering and ramming includings cost and conveyanced water to wrok site and all operational, inD.Idental, labour charges, hire charges & T& P etc., complete for finished item of work (APSS No.309 & 310).
379.98
-
267757.54
... More
S1;Supply and delivery of 50 mm dia Gunmetal gate valve (GM Peet) as per IS-778 Class-I Indian make heavey type
84
-
315513.24
... More
S1;Construction of granular sub-base by providing Well graded material for grading III mixing in a Mechanical Mix Plant at OMC carriage mixed material to work site spreading in uniform layers with motor grader on prepared surface and compacting with 80-100 kN Vibratory Roller to achieve the desired density, complete as per Technical Specification of MORTH.
5178.35
-
5977731.89
... More
S1;Manufacture, Supplying and delivery of 160mm Dia. HDPE Pipe of Pressure 8.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
810
-
586221.3
... More
S1;Manufacture, Supplying and delivery of 160mm Dia. HDPE TEES conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
5
-
8759.7
... More
S1;Construction of 3'-0" dia.(1524mm)Solid block masonry INSPECTION CHAMBER as per IS.4111, Part-I-1986 with CM(1:6)Prop. Fly-Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1:3)Prop., 12mm thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 3'-0" (1524mm) in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.
66
-
447666.12
... More
S1;RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering (Slab)
5.5
-
35174.29
... More
S1;VRCC M20 grade design mix concrete corresponding to IS-456 using BATCHING PLANT at site with stone aggregate of 20mm & 12.5mm nominal size hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, centering charges such as Steel Scaffolding Pipes, Jack Props, Steel Centering Plates, etc., mixing concrete, pumping of concrete,laying, levelling, vibrating with vibrator, curing etc., as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the department for ROOF BEAMS.
0.63
-
6951.45
... More
S1;Labour charges for jointing D.I pipes and valves with flanged ends excluding cost and joints materials such as bolts, nuts rubber packing, whilte lead including filling with water conveyance and all other chrges etc.,complete for 100mm Dia. Sluice Valve.
10
-
3146.1
... More
S1;Supply and Transportation of 10 HP, 20-24 Stage, 5 star rated vertical Submersible Motor Pumpset, confirming to IS.8034 and motor confirming to IS.9283 with water proof winding, Pump shall be suitable for various delivery dead and dischage with stainles steel shaft, Motor suitable for wrking on 415V (+)/(-) 10%, Three Phase 50 Hz AC supply, etc., complete for 6" Bore Well. Makes: Kirloskar/Crompton/Texmo/ CRI/KSB/Lubi/PSG/ Aryen Varsha
8
-
534891.24
... More
S1;PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing and all other taxes etc., complete for Bed of Foundations.
39.6
-
156310.7
... More
S1;RCC M20 grade design mix concrete corresponding to IS-456 using BATCHING PLANT at site with stone aggregate of 20mm & 12.5mm nominal size hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, centering charges such as Steel Scaffolding Pipes, Jack Props, Steel Centering Plates, etc., mixing concrete, pumping of concrete,laying , levelling,curing etc., as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept.,for LINTELS.
0.07
-
816.97
... More
S1;Construction of un-reinforced, design mix M 30 grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixer laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T&P etc., curing of concrete slabs for 14- days as per Design & drawing and Technical Specification Clause 1501 MORD.(As per APDSS and as directed by the Departmental Authorities) for Block Approaches.
-
-
-
... More
S1;Manufacture, Supplying and delivery of 200mm Dia. HDPE TEES conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
3
-
9812.94
... More
S1;Supplying of class OD of 180 pipe SN 8 Double wall Corrogated (External annual corrugated &smooth internal wall) (DWC) piping system in accordance with IS 16098 (part-2) and conveying to work site rolling and lowering in to trenches,laying true to line and level and perfect linking at joints,testing and commissioning,including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing with all labour,all lead &lift including encasing the pipe alround to a depth of not less than 15cms with soft gravel or selected earth available from the excavation etc.,complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing)
2125
-
1092228.75
... More
S1;Supply and delivery of D.I. D/F Scover Valves of 100 mm Dia. conforming to IS 14846/2000 with amendments No.1 &2 heavy duty with D.I grade FG 260 as per IS 210.Two coats of primer suitable for epozy paints finish shall be applied to all metal surface and finally two coats of Epoxy paint.The valve shall be tested for colsed end test against Hydrostatic test requirement of type P.N.I including cost and conveyance charges to work site loading & unloading and all other connected taxes etc., complete for finished item of work.
2
-
28344.68
... More
S1;GLSR /SUMP - 100 KL Capacity: Earth work excavation for foundations and deposting on bank with an initial lead of 10 Mts. and lift of 2 Mts. in sand or loose soils, wet sand not under water, silt in canals, channels and drains etc., and including all operational incidental labour charges such as shoring sheeting, planking, strutting etc., complete for finished item of work.
135.64
-
15709.59
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Ordinary Rock)
1039.18
-
152452.1
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Hard Rock Blasting Prohibited)
853.6
-
620353.55
... More
S1;APPROACH ROAD Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Road works.
1465.86
-
169775.91
... More
S1;RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering (Slab)
19.65
-
127622.82
... More
S1;Supplying and fixing of approved make Semi Automatic Star Delta Starter fitted in CRCA sheet enclosure suitable for 3 Phase, 415-V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No-volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete.
8
-
146408.83
... More
S1;RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering (Slab)
55.65
-
365562.62
... More
S1;Filling with Stone Crusher Dust for site levelling with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental and all labour charges etc., complete for finished item of work for irrespective of thickness.
10.2
-
7520.85
... More
S1;Providing High Yield Strenth Deformed STEEL bars / TMT (Fe.415 Grade & Fe.500 Grade as per IS1786 and as amended upto date) of different of diameters including labour charges for cutting, bending to required size, shapes, placing in position with cover blocks of approved materials and size and tying firmly with M.S.Binding wire of 20 SWG forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of mild steel bars, including all wastage, such as over laps, welding joints, chairs, space bars and all incidental, Operational labour charges, including sales and other taxes on all materials etc., complete for finished item of work in all floors (payment will be made on the basis of wieght of fabrication deformed bars only. No re-rolled steel shall be allowed) complete for (8mm to 40mm).
3.48
-
286487.76
... More
S1;Providing Impervious coat Plastering to exposed RCC Slab surface with CM(1:4) Prop.20mm thick mixed with approved water proofing compound @ 1 Kg/bag of cement and laid over roof when the slab is green and fine rendering with cement slurry including cost & conveyance of all materials and water to work site and all operational, incidental charges, labour charges for mixing mortar, laying rendering smooth and thread lining, curing, rounding of junctions of walls and slab etc., complete for finished item of work.
276.1
-
143008.47
... More
S1;VRCC M20 grade design mix concrete corresponding to IS-456 using BATCHING PLANT at site with stone aggregate of 20mm & 12.5mm nominal size hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, centering charges such as Steel Scaffolding Pipes, Jack Props, Steel Centering Plates, etc., mixing concrete, pumping of concrete,laying concrete, levelling, vibrating with vibrator, curing etc., as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept.,for ROOF SLABS.
1.4
-
16919.13
... More
S1;Manufacture, Supplying and delivery of 250mm Dia. D.I BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
4
-
22032.22
... More
S1;P.C.C. work of mix M15 Prop. 40 mm graed graded hard granite machine crushed metal incluidng cost and conveyance of all materials and water to work site and all labour charges, , laying, curing etc., complete for Drains bed.(1:2.5:5)
951.2
-
4829160.79
... More
S1;Providing High Yield Strenth Deformed STEEL bars / TMT (Fe.415 Grade & Fe.500 Grade as per IS1786 and as amended upto date) of different of diameters including labour charges for cutting, bending to required size, shapes, placing in position with cover blocks of approved materials and size and tying firmly with M.S.Binding wire of 20 SWG forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of mild steel bars, including all wastage, such as over laps, welding joints, chairs, space bars and all incidental, Operational labour charges, including sales and other taxes on all materials etc., complete for finished item of work in all floors (payment will be made on the basis of wieght of fabrication deformed bars only. No re-rolled steel shall be allowed) complete for (8mm to 40mm).
9.2
-
763110.58
... More
S1;BORES Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 200/225/300 /350/450 mm hole (for insertion of 110/140/160/180/200mm PVC Pipe/175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burled channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebuIlled pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, damps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per 1SI specification used for rotary tube well. The pebbled gravel acking should be carried out in such a way that the theoretical quantity consumed completely
488
-
663680
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Ordinary Rock)
402.3
-
59019.11
... More
S1;GLSR Earth work excavation for foundations and deposting on bank with an initial lead of 10 Mts. and lift of 2 Mts. in sand or loose soils, wet sand not under water, silt in canals, channels and drains etc., and including all operational incidental labour charges such as shoring sheeting, planking, strutting etc., complete for finished item of work.
372.09
-
43453.22
... More
S1;Supply and delivery of Rubber Packing including cost and conveyance of all materials to site of work etc., complete ( weight 0.44 Kgs. per joint .)
3.6
-
380.31
... More
S1;Lowering and keeping in position of 200 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
-
-
-
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, inD.Idental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for finished item of work for Water Supply Main Lines.
1270.47
-
147146.07
... More
S1;Supply and delivery of D.I. D/F AIR VALVES OF 80mm Dia. conforming to IS 14846/2000 with amendments No.1 & 2 heavy duty with D.I grade FG-260 as per IS 210.Two coats of primer suitable for epoxy paints finish shall be applied to all metal surface and finally two coats of Epoxy paint.The valve shall be tested for colsed end test against Hydrostatic test requirement of type PN-1 including cost and conveyance charges to work site loading & unloading and all other connected taxes etc., complete for finished item of work.
-
-
-
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Foundation of Buildings.
2310.9
-
269866.9
... More
S1;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
35.83
-
2804141.01
... More
S1;Supplying and delivery of 160mm Dia. HDPE END CAPS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
2
-
720.32
... More
S1;Providing Independent Earthing from Main switch Board for earth continuity with No.8, G.I wire including excavation of earth in hard gravel/hard desintegrated rock upto 5'-6'' depth below ground level of section 5'x2'x3' duly providing 40mm Dia G.I Pipe of 2mts, length using GI bolts&nuts and fixing earth wire including supply and fixing 1'-6'' dia 0'-8'' depth hume pipe ring and refilling the pit with 4 Kgs hard coke, 20Kgs salt and excavated earth including all labour charges etc., complete for finished item of work.
1
-
4302.43
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Ordinary Rock)
1270.47
-
186383.62
... More
S1;Construction of un-reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T&P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days as per design & drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities.cc pavement
4917.51
-
29580808.32
... More
S1;Supply and delivery of Bolts & Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values. ( No.of Bolts for each valve 8 Nos. and total weight of Bolts 1.50 Kg./8 Nos.)
12
-
1513.23
... More
S1;Construction of un-reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T&P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days as per design & drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities.cc pavement
3690.43
-
22042140.72
... More
S1;Construction of un-reinforced, design mix M 30 grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixer laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T&P etc., curing of concrete slabs for 14- days as per Design & drawing and Technical Specification Clause 1501 MORD.(As per APDSS and as directed by the Departmental Authorities) for Block Approaches.
449.7
-
2557227.13
... More
S1;VRCC M20 grade design mix concrete corresponding to IS-456 using BATCHING PLANT at site with stone aggregate of 20mm & 12.5mm nominal size hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, centering charges such as Steel Scaffolding Pipes, Jack Props, Steel Centering Plates, etc., mixing concrete, pumping of concrete,laying concrete, levelling, vibrating with vibrator, curing etc., as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept.,for ROOF SLABS.
1.4
-
16627.65
... More
S1;Providing High Yield Strenth Deformed STEEL (HYSD) / Thermo Mechanically Treated (TMT) Steel Bars (Fe 415/Fe.500 Grade as per IS1786-1979) of different of diameters for RCC Works including labour charges for straightening, cutting, bending to required size and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars and including all wastage, such as overlaps, couplings, chairs, spacer bars and binding wire, cover blocks and all incidental, Operational labour charges such as cutting, bending, placing in position, tying, including sales and other taxes on all materials etc., complete for finished item of work for all Floors. (APSS.No.126). Payment will be made on the basis of wieght of fabrication deformed bars only. No re-rolled steel shall be allowed for 8mm to 40mm).
0.3
-
24288.87
... More
S1;VRCC M20 grade design mix concrete corresponding to IS-456 using BATCHING PLANT at site with stone aggregate of 20mm & 12.5mm nominal size machine crushed hard granite metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, centering charges such as casurina ballies, bamboos, wooden reapers, runners, wood posts, Wall Plates, Steel centering plates etc., mixing concrete,pumping of concrete,laying,levelling, vibrating with vibrator, curing etc., as per standard specifications but excluding cost of steel and its fabrication charges etc., for finished item of work to the required strength as directed by the department for VRCC PLINTH BEAMS.
0.63
-
7290.37
... More
S1;SWEAGE Supplying of class OD of 460 pipe SN 8 Double wall Corrogated (External annual corrugated &smooth internal wall) (DWC) piping system in accordance with IS 16098 (part-2) and conveying to work site rolling and lowering in to trenches,laying true to line and level and perfect linking at joints,testing and commissioning,including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing with all labour,all lead &lift including encasing the pipe alround to a depth of not less than 15cms with soft gravel or selected earth available from the excavation etc.,complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing)
500
-
1369290
... More
S1;Cost and supply of 175 mm dia. PVC blue casing pipe including transportation to the work site.
488
-
563640
... More
S1;Providing, laying, spreading and compacting graded WMM aggregate to wet mix macadam specification including cost, seigniorage of all material and including premixing the material with water at OMC in mechanical mixer Plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base course on well prepared surface and compacting with Vibratory roller of 8 to 10 to achieve the desired density etc., as directed by the Engineer-in-Charge and as per MORTH & H Specification for finished item of work.
1832.33
-
2632545.16
... More
S1;Providing High Yield Strenth Deformed STEEL (HYSD) / Thermo Mechanically Treated (TMT) Steel Bars (Fe 415/Fe.500 Grade as per IS1786-1979) of different of diameters for RCC Works including labour charges for straightening, cutting, bending to required size and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars and including all wastage, such as overlaps, couplings, chairs, spacer bars and binding wire, cover blocks and all incidental, Operational labour charges such as cutting, bending, placing in position, tying, including sales and other taxes on all materials etc., complete for finished item of work for all Floors. (APSS.No.126). Payment will be made on the basis of wieght of fabrication deformed bars only. No re-rolled steel shall be allowed for 8mm to 40mm).
0.3
-
24488.45
... More
S1;Manufacture, Supplying and delivery of 110mm Dia. HDPE Pipe of Pressure 8.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
3230
-
1119291.9
... More
S1;Lowering and keeping in position of 100 mm Dia. SCOUR VALVE including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
2
-
400.28
... More
S1;DOOR of SIZE 0.90 x 2.00 m:- Providing and fixing Door Frames fabricated from sections made of galvanized Stell powder coated (base steel as per IS-513, galvanized as per IS-277 with zinc of 120 grams/square meter), the factory made section are powder coated with pure polyester powder of 50-60 microns thick with total coated thickness of 1.25mm, size of Door Frame section of 105x60mm with a rebate of 38mm to accommodate 35mm thick Door Shutter with groove to insert gasket in the frame section, frame sectiion filled with polyurethane foam, cut to length and joined by way of welding each frame provided with :: (a) 2mm thick MS powder coated butt hinges of 100mm long - 3 Nos for Single Shutter, 6 Nos., for double shutter (b) CRCA electroplates stiffeners of 6 Nos - 3 in each vertical (c) 40mm x 200mm x 1.20mm hold fasts screwd to stiffeners - 6 Nos. with split end tail (d) Nylon Aldrops Receiver - 1 No. for Single shutter frame (e) Tie Road - 1 No. and supplying and fixing of Single Leaf Flush Door Shutter Solid bond Wood black Board type with Commercial ply on both faces of 30mm thick conforming to IS.2202 including cost of fixtures such as (i) 2 Nos.-250mm long M.S.powder coated Aldrops, (ii) 1 No.-250mm long 10mm Dia. M.S.Powder Coated Tower Bolt, (iii) 2 Nos.-125mm long M.S.powder coated Door Handles and (iv) 1 No. M.S.Powder coated Door Stopper and including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the department.
1
-
7726.26
... More
S1;Lowering, Laying and Jointing of 160mm Dia. D.I Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
353
-
24226.39
... More
S1;Filling Sand for Culvert foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.
424.76
-
299314.08
... More
S1;OUT FALL DRAIN Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Foundation of RCC Storm Water Drains.
150.48
-
17428.59
... More
S1;Brick Masonry in C.M.(1:6) Prop. with Fly Ash cement solid blocks of size 290x225x140mm for manufacturing with compressive strength of 50 Kg/Sq.cm using fly ash, cement, gypsum and stone dust including cost and conveyance of all materials and water to work site, scaffolding and all labour charges,curing etc.,complete.
7.4
-
45971.53
... More
S1;Filling Sand for Culvert foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.
476.85
-
299775.44
... More
S1;Lowering, Laying and Jointing of 250mm Dia. DI Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
3050
-
617747.01
... More
S1;Lowering, Laying and Jointing of 63mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
848
-
28280.8
... More
S1;Filling with Gravel in trenches sides of foundations and Basements with initial lead in layeing not excuding 15cms thick consolidating each deposited layer by watering and ramming includings cost and conveyanced water to wrok site and all operational, incidental, labour charges, hire charges & T& P etc., complete for finished item of work for filling Basements. (APSS No.309 & 310).
7.45
-
328.49
... More
S1;VRCC. M20 grade Nominal mix concrete corresponding to IS-456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.,for precast Slabs of Drains.
3
-
17984.64
... More
S1;Construction of granular sub-base by providing Well graded material for grading III mixing in a Mechanical Mix Plant at OMC carriage mixed material to work site spreading in uniform layers with motor grader on prepared surface and compacting with 80-100 kN Vibratory Roller to achieve the desired density, complete as per Technical Specification of MORTH.
1465.86
-
1591454.88
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, inD.Idental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for finished item of work for Water Supply Main Lines.
1775.25
-
207318.96
... More
S1;Manufacture, Supplying and delivery of 200mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
4
-
11325.16
... More
S1;Supply and fixing to Cement JALLIES 40mm thick including cost and conveyance of all materials and water to work site and all operational, incidental charges, mxing, laying and all labour charges, curing with neat finishing etc., complete for finished item of work as directed by the dept.
0.35
-
102.2
... More
S1;Supply & Fixing of 180mm dia. PVC Bore Cap
15
-
4725
... More
S1;P.C.C. work of mix M15 Prop. 40 mm graed graded hard granite machine crushed metal incluidng cost and conveyance of all materials and water to work site and all labour charges, , laying, curing etc., complete for Drain side walls.(1:2.5:5)
86.4
-
660641.18
... More
S1;Forming embankment with 50% of Gravel and 50% of Sand by mechanical means with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning including Cost and conveyance of all materials, all hire and operational charges of T&P etc., complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m as directed by the Departmental Authorities for Side Berms
1282.63
-
721953.95
... More
S1;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
322.03
-
25201630.43
... More
S1;Supply and fixing to Cement JALLIES 40mm thick including cost and conveyance of all materials and water to work site and all operational, incidental charges, mxing, laying and all labour charges, curing with neat finishing etc., complete for finished item of work as directed by the dept.
0.35
-
102.2
... More
S1;Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), excluding the cost of the gasket but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987
-
-
-
... More
S1;RCC M20 grade design mix concrete corresponding to IS-456 using BATCHING PLANT at site with stone aggregate of 20mm & 12.5mm nominal size hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, centering charges such as Steel Scaffolding Pipes, Jack Props, Steel Centering Plates, etc., mixing concrete, pumping of concrete,laying , levelling,curing etc., as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept.,for LINTELS.
0.07
-
793.92
... More
S1;Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 MORTH
439
-
126522.63
... More
S1;Painting to new walls with snow cem or other equal and approved water proof cement paint 2 coats over priming coat with approved exterior grade cement making 3 coats all colours including cost and conveyance of all materials, labour charges etc; complete for finished item of work.
29.91
-
6889.84
... More
S1;VRCC M20 grade design mix concrete corresponding to IS-456 using BATCHING PLANT at site with stone aggregate of 20mm & 12.5mm nominal size machine crushed hard granite metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, centering charges such as casurina ballies, bamboos, wooden reapers, runners, wood posts, Wall Plates, Steel centering plates etc., mixing concrete, pumping of concrete, laying, levelling, vibrating with vibrator, curing etc., as per standard specifications but excluding cost of steel and its fabrication charges etc., for finished item of work to the required strength as directed by the department for VRCC FOOTINGS.
0.49
-
4286.69
... More
S1;Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 200/225/300 /350/450 mm hole (for insertion of 110/140/160/180/200mm PVC Pipe/175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burled channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebuIlled pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, damps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per 1SI specification used for rotary tube well. The pebbled gravel acking should be carried out in such a way that the theoretical quantity consumed completely.
915
-
1244400
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, inD.Idental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for finished item of work for Water Supply Main Lines.
4557.52
-
532227.19
... More
S1;Supply and delivery of D.I. D/F AIR VALVES OF 80mm Dia. conforming to IS 14846/2000 with amendments No.1 & 2 heavy duty with D.I grade FG-260 as per IS 210.Two coats of primer suitable for epoxy paints finish shall be applied to all metal surface and finally two coats of Epoxy paint.The valve shall be tested for colsed end test against Hydrostatic test requirement of type PN-1 including cost and conveyance charges to work site loading & unloading and all other connected taxes etc., complete for finished item of work.
-
-
-
... More
S1;Construction of Brick masonry Valve Pit of size 3'-0" x 3'-0" required for sluice valves, scour valves & Air Valves including all D.Ivil works such as earth work excavation up to 1.32 mts ,4" thick PCC(1:5:10)Prop., brick masonry in CM(1:8) Prop.,12mm thick plastering in CM(1:4) including 4"thick RCC M30 Grade design mix with necessary reinforcemnt including cost of steel and its fabrication chares for cover slab, and smooth rendering etc., complete as directed by department.
2
-
26831.1
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Ordinary Rock)
1382.11
-
202761.09
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Hard Rock Blasting Prohibited)
304.32
-
221166.65
... More
S1;PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing and all other taxes etc., complete for Bed of Foundations.
616
-
2431499.84
... More
S1;Lowering and keeping in position of 250 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
2
-
1074.31
... More
S1;Supply and delivery of D.I. D/F AIR VALVES OF 80mm Dia. conforming to IS 14846/2000 with amendments No.1 & 2 heavy duty with D.I grade FG-260 as per IS 210.Two coats of primer suitable for epoxy paints finish shall be applied to all metal surface and finally two coats of Epoxy paint.The valve shall be tested for colsed end test against Hydrostatic test requirement of type PN-1 including cost and conveyance charges to work site loading & unloading and all other connected taxes etc., complete for finished item of work.
-
-
-
... More
S1;Supply and delivery of Rubber Packing including cost and conveyance of all materials to site of work etc., complete ( weight 0.44 Kgs. per joint .)
11.7
-
1235.99
... More
S1;Construction of 3'-0" dia.(1524mm)Solid block masonry INSPECTION CHAMBER as per IS.4111, Part-I-1986 with CM(1:6)Prop. Fly-Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1:3)Prop., 12mm thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 5'-0" (1524mm) in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.
66
-
704492.58
... More
S1;Construction of 3'-0" dia.(1524mm)Solid block masonry INSPECTION CHAMBER as per IS.4111, Part-I-1986 with CM(1:6)Prop. Fly-Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1:3)Prop., 12mm thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 3'-0" (1524mm) in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.
106
-
718978.92
... More
S1;Filling with SAND intrenches sides of Foundations and Basements with initial lead in layeing not excuding 15cms thick consolidating each deposited layer by watering and ramming includings cost and conveyanced water to wrok site and all operational, inD.Idental, labour charges, hire charges & T& P etc., complete for finished item of work (APSS No.309 & 310).
197.25
-
124003.07
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Hard Rock Blasting Prohibited)
201.15
-
146185.7
... More
S1;Filling with Gravel in trenches sides of foundations and Basements with initial lead in layeing not excuding 15cms thick consolidating each deposited layer by watering and ramming includings cost and conveyanced water to wrok site and all operational, incidental, labour charges, hire charges & T& P etc., complete for finished item of work for filling Basements. (APSS No.309 & 310).
7.45
-
339.92
... More
S1;Supply and delivery of D.I. D/F Sluice valves of 100 mm Dia. conforming to IS 14846/2000 with amendments No.1 & 2 heavy duty with D.I grade FG 260 as per IS 210.Two coats of primer suitable for epoxy paints finish shall be applied to all metal surface and finally two coats of Epoxy paint.The valve shall be tested for colsed end test against Hydrostatic test requirement of type P.N.I including cost and conveyance charges to work site loading & unloading and all other connected taxes etc., complete for finished item of work.
16
-
226757.44
... More
S1;Painting to new walls with snow cem or other equal and approved water proof cement paint 2 coats over priming coat with approved exterior grade cement making 3 coats all colours including cost and conveyance of all materials, labour charges etc; complete for finished item of work.
29.91
-
6889.84
... More
S1;Formation of embankment with 50% of Gravel and 50% Of Sand and Spreading in uniform layers sectioning and consolidation with Static Road Roller to meet requirement of table 300-2 of MORT&H, including all hire and operational charges of T&P and seigniorage charges etc., complete for finished item of work as MORT&H specification 395 (4th revision) (Payment will be made based on level for finished item of work.)
1832.56
-
1412903.76
... More
S1;Providing Independent Earthing from Main switch Board for earth continuity with No.8, G.I wire including excavation of earth in hard gravel/hard desintegrated rock upto 5'-6'' depth below ground level of section 5'x2'x3' duly providing 40mm Dia G.I Pipe of 2mts, length using GI bolts&nuts and fixing earth wire including supply and fixing 1'-6'' dia 0'-8'' depth hume pipe ring and refilling the pit with 4 Kgs hard coke, 20Kgs salt and excavated earth including all labour charges etc., complete for finished item of work.
10
-
43346.96
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Ordinary Rock)
135.64
-
19898.67
... More
S1;VRCC. M20 grade design mix concrete corresponding to IS-456 using WEIGH BATCHER / MIXER with 20mm and 12.50mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of worktt.,for GLSR TOP RING BEAM.
1.71
-
19296.06
... More
S1;Filling with Sand for Basements and sides of Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work
27.56
-
17327.89
... More
S1;Laying PCC work of mix (1:3:6) Prop.using 20mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing, seigniorage charges and all other taxes etc., complete for Drains Bed
45.5
-
224781.38
... More
S1;Supply and delivery of D.I.D/F SLUICE VALVES OF 200mm Dia. conforming to IS 14846/2000 with amendments No.1 & 2 heavy duty with D.I grade FG-260 as per IS 210.Two coats of primer suitable for epoxy paints finish shall be applied to all metal surface and finally two coats of Epoxy paint.The valve shall be tested for colsed end test against Hydrostatic test requirement of type PN-1 including cost and conveyance charges to work site loading & unloading and all other connected taxes etc., complete for finished item of work.
2
-
57214.24
... More
S1;Providing High Yield Strenth Deformed STEEL (HYSD) / Thermo Mechanically Treated (TMT) Steel Bars (Fe 415/Fe.500 Grade as per IS1786-1979) of different of diameters for RCC Works including labour charges for straightening, cutting, bending to required size and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars and including all wastage, such as overlaps, couplings, chairs, spacer bars and binding wire, cover blocks and all incidental, Operational labour charges such as cutting, bending, placing in position, tying, including sales and other taxes on all materials etc., complete for finished item of work for all Floors. (APSS.No.126). Payment will be made on the basis of wieght of fabrication deformed bars only. No re-rolled steel shall be allowed for 8mm to 40mm).
0.3
-
24288.87
... More
S1;Filling Sand for Culvert foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.
44.55
-
41054.61
... More
S1;VRCC. M20 grade Nominal mix concrete corresponding to IS-456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.,for precast Slabs of Drains.
5.4
-
32487.8
... More
S1;Construction of granular sub-base by providing Well graded material for grading III mixing in a Mechanical Mix Plant at OMC carriage mixed material to work site spreading in uniform layers with motor grader on prepared surface and compacting with 80-100 kN Vibratory Roller to achieve the desired density, complete as per Technical Specification of MORTH.
968.18
-
1061502.87
... More
S1;P.C.C. work of mix M15 Prop. 40 mm graed graded hard granite machine crushed metal incluidng cost and conveyance of all materials and water to work site and all labour charges, , laying, curing etc., complete for Drain side walls.(1:2.5:5)
48
-
367925.28
... More
S1;Supplying and fixing of 65mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for finished item of work for connection to GLSR
4600
-
4133995.39
... More
S1;Supply and Erection of Panel Mounting 125-A, 4 Pole, 25-KA, MCCB with thermal magnetic setting/Microprocessor based release arrangement with all connections etc., and supply of 125A 4 pole MCCB adjustable confirms to IS/IEC 60947-2 having breaking capacity 25-KA with Thermal Magnetic setting based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the dept., of make L&T/Schneider/Siemens/ Hager.
8
-
98416.59
... More
S1;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding Excise duty, Sale Tax and speicals etc., complete for finished item of work. (above 90mm dia. straight length in 6mts.)
1900
-
658407
... More
S1;Labour charges for jointing D.I pipes and valves with flanged ends excluding cost and joints materials such as bolts, nuts rubber packing, whilte lead including filling with water conveyance and all other chrges etc.,complete for 100mm Dia. Scour Valve.
4
-
1322.84
... More
S1;VRCC M20 grade design mix concrete corresponding to IS-456 using BATCHING PLANT at site with stone aggregate of 20mm & 12.5mm nominal size machine crushed hard granite metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, centering charges such as casurina ballies, bamboos, wooden reapers, runners, wood posts, Wall Plates, Steel centering plates etc., mixing concrete,pumping of concrete,laying,levelling, vibrating with vibrator, curing etc., as per standard specifications but excluding cost of steel and its fabrication charges etc., for finished item of work to the required strength as directed by the department for VRCC PLINTH BEAMS.
0.63
-
7095.01
... More
S1;Lowering and keeping in position of 200 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
2
-
1119.22
... More
S1;Painting with synthetic Enamel Paint - Three cotes one coat primer and two coats of syn enamel paint including cost and conveyance of all materials with labor charges,complete as per SS
439
-
119598.59
... More
S1;VRCC. M20 grade design mix concrete corresponding to IS-456 using WEIGH BATCHER / MIXER with 20mm and 12.50mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workt.,for GLSR SIDE WALLS.
29.79
-
474501.56
... More
S1;VRCC. M20 grade design mix concrete corresponding to IS-456 using WEIGH BATCHER / MIXER with 20mm and 12.50mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workt.,for GLSR BOTTOM SLABS.
11.86
-
78548.42
... More
S1;VRCC. M20 grade design mix concrete corresponding to IS-456 using WEIGH BATCHER / MIXER with 20mm and 12.50mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workt.,for GLSR BOTTOM SLABS.
11.86
-
77387.26
... More
S1;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE Pipe of Pressure 8.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding Excise duty, Sale Tax and speicals etc., complete for finished item of work. (above 90mm dia. straight length in 6mts.)
500
-
173262.88
... More
S1;Lowering and keeping in position of 200 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
2
-
1074.34
... More
S1;Manufacture, Supplying and delivery of 110mm Dia. HDPE TEES conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
3
-
1469.01
... More
S1;Construction of Brick masonry Valve Pit of size 3'-0" x 3'-0" required for sluice valves, scour valves & Air Valves including all D.Ivil works such as earth work excavation up to 1.32 mts ,4" thick PCC(1:5:10)Prop., brick masonry in CM(1:8) Prop.,12mm thick plastering in CM(1:4) including 4"thick RCC M30 Grade design mix with necessary reinforcemnt including cost of steel and its fabrication chares for cover slab, and smooth rendering etc., complete as directed by department.
4
-
47099.08
... More
S1;Lowering and keeping in position of 80 mm Dia. AIR VALVE including conveyance of all materials to work site, nuts and bolts, rubber packing and white lead and all other charges etc., complete as per the direction of the department for finihsed item of work .
7
-
1012.63
... More
S1;Supply and delivery of Rubber Packing including cost and conveyance of all materials to site of work etc., complete ( weight 0.44 Kgs. per joint .)
16.2
-
1711.37
... More
S1;Supply and delivery of D.I. D/F AIR VALVES OF 80mm Dia. conforming to IS 14846/2000 with amendments No.1 & 2 heavy duty with D.I grade FG-260 as per IS 210.Two coats of primer suitable for epoxy paints finish shall be applied to all metal surface and finally two coats of Epoxy paint.The valve shall be tested for colsed end test against Hydrostatic test requirement of type PN-1 including cost and conveyance charges to work site loading & unloading and all other connected taxes etc., complete for finished item of work.
1
-
12860.08
... More
S1;Filling Sand for Culvert foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.
33
-
20745.71
... More
S1;Refilling the pipe line trenches with excavated earth complying with standard speD.Ification after the pipe laid including all leads and lifts, depositing surplus earth watering, tamping, levelling and forming to the original level including labour charges etc., complete as directed by the department.
3090.98
-
680872.03
... More
S1;Supplying and fixing of approved make Semi Automatic Star Delta Starter fitted in CRCA sheet enclosure suitable for 3 Phase, 415-V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No-volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete.
2
-
36595.38
... More
S1;Filling with SAND intrenches sides of Foundations and Basements with initial lead in layeing not excuding 15cms thick consolidating each deposited layer by watering and ramming includings cost and conveyanced water to wrok site and all operational, inD.Idental, labour charges, hire charges & T& P etc., complete for finished item of work (APSS No.309 & 310).
102
-
112014.35
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Ordinary Rock)
54.26
-
7959.47
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Hard Rock Blasting Prohibited)
9.75
-
7085.81
... More
S1;Labour charges for jointing DI pipes and valves with Double flanged ends including boring the main threading the bore and fixing nipple etc., excluding the cost of rubber insertions, bolts & nuts, Air Valves & Flanged tail piece etc., and including cost and conveyance of all materials to site of wo and all other chrges etc.,complete for 80mm Dia. Air Valve.
-
-
-
... More
S1;Manufacture, Supplying and delivery of 110mm Dia. M.S. FLANGES for jointing conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
6
-
1172.52
... More
S1;VRCC. M20 grade Nominal mix concrete corresponding to IS-456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.,for precast Slabs of Drains.
453.87
-
2720900.72
... More
S1;Painting to new walls with snow cem or other equal and approved water proof cement paint 2 coats over priming coat with approved exterior grade cement making 3 coats all colours including cost and conveyance of all materials, labour charges etc; complete for finished item of work.
64.62
-
14882.17
... More
S1;Power Bores : Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 200/225/300 /350/450 mm hole (for insertion of 110/140/160/180/200mm PVC Pipe/175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burled channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebuIlled pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, damps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per 1SI specification used for rotary tube well. The pebbled gravel acking should be carried out in such a way that the theoretical quantity consumed completely.
305
-
414800
... More
S1;Supplying and delivery of 160mm Dia. HDPE END CAPS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
2
-
720.32
... More
S1;Manufacture, Supplying and delivery of 110mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
2
-
1004.36
... More
S1;Supply and delivery of D.I. D/F Sluice valves of 150 mm Dia. conforming to IS 14846/2000 with amendments No.1 & 2 heavy duty with D.I grade FG 260 as per IS 210.Two coats of primer suitable for epoxy paints finish shall be applied to all metal surface and finally two coats of Epoxy paint.The valve shall be tested for colsed end test against Hydrostatic test requirement of type P.N.I including cost and conveyance charges to work site loading & unloading and all other connected taxes etc., complete for finished item of work.
3
-
66137.55
... More
S1;VRCC. M20 grade Nominal mix concrete corresponding to IS-456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.,for precast Slabs of Drains.
4.05
-
23953.52
... More
S1;Filling Sand for Culvert foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.
1426.8
-
896968.85
... More
S1;Geological Survey charges excluding taxes for Plain Area
5
-
6500
... More
S1;Supplying and Run of 4 of 56/0.3mm (4.0 Sq.mm.) insulated flexible copper cable of Gold medal/ standard/million/suncab make in the existing metalic/Non metalic conduit pipe including all materials and all labour charges etc., complete for Motors connection.
50
-
10508
... More
S1;Manufacture, Supplying and delivery of 160mm Dia. HDPE TEES conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
2
-
3503.88
... More
S1;Lowering, Laying and Jointing of 63mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
672
-
22411.2
... More
S1;Supply, Transportation of 10.00HP Three Phase open well ISI Submersible Motor Pumpset (100x75) with makes adopted in sor. Including errection in GLSR.(WITH 35M HEAD)
2
-
94831.02
... More
S1;Supply, Transportation of 7.5 HP Three Phase open well ISI Submersible Motor Pumpset (100x75) with makes adopted in sor.
2
-
74117.86
... More
S1;Manufacture, Supplying and delivery of 200mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
2
-
5662.58
... More
S1;VRCC. M20 grade design mix concrete corresponding to IS-456 using WEIGH BATCHER / MIXER with 20mm and 12.50mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workt.,for GLSR BOTTOM SLABS.
33.14
-
222496.47
... More
S1;Lowering and keeping in position of 80 mm Dia. AIR VALVE including conveyance of all materials to work site, nuts and bolts, rubber packing and white lead and all other charges etc., complete as per the direction of the department for finihsed item of work .
-
-
-
... More
S1;VRCC. M20 grade design mix concrete corresponding to IS-456 using WEIGH BATCHER / MIXER with 20mm and 12.50mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of worktt.,for GLSR TOP DOME SLAB.
1.62
-
25218.18
... More
S1;200 mm Dia. D.I. pipes .
133
-
73418.61
... More
S1;Construction of 904.0 m (3'-0")Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part-I-1986 with CM(1:6)Prop. Fly-Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1:3)Prop. 1/2" thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3'-0") in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.(FOR Valve Pits)
13
-
88176.66
... More
S1;P.C.C. work of mix M15 Prop.20 mm to 10mm hard broken granite machine crushed metal incluidng cost and conveyance of all materials and water to work site and all labour charges, , laying, curing etc., complete for Drain bed .(1:2.5:5)
29.7
-
146798.79
... More
S1;SEWAGW LINE Supplying of class OD of 460 pipe SN 8 Double wall Corrogated (External annual corrugated &smooth internal wall) (DWC) piping system in accordance with IS 16098 (part-2) and conveying to work site rolling and lowering in to trenches,laying true to line and level and perfect linking at joints,testing and commissioning,including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing with all labour,all lead &lift including encasing the pipe alround to a depth of not less than 15cms with soft gravel or selected earth available from the excavation etc.,complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing)
-
-
-
... More
S1;Formation of embankment with 50% of Gravel and 50% Of Sand and Spreading in uniform layers sectioning and consolidation with Static Road Roller to meet requirement of table 300-2 of MORT&H, including all hire and operational charges of T&P and seigniorage charges etc., complete for finished item of work as MORT&H specification 395 (4th revision) (Payment will be made based on level for finished item of work.)
5178.35
-
3120318.36
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Hard Rock Blasting Prohibited)
27.13
-
19714.98
... More
S1;Lowering and keeping in position of 150 mm Dia. Sluice Valve including conveyance of all materials to work site, nuts and bolts, rubber packing and white lead and all other charges etc., complete as per the direction of the department for finihsed item of work .
2
-
651.22
... More
S1;RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering For Pedastals to HDPE pipes
5.67
-
35862.13
... More
S1;Filling with SAND intrenches sides of Foundations and Basements with initial lead in layeing not excuding 15cms thick consolidating each deposited layer by watering and ramming includings cost and conveyanced water to wrok site and all operational, inD.Idental, labour charges, hire charges & T& P etc., complete for finished item of work (APSS No.309 & 310).
546.19
-
343369.71
... More
S1;Filling Sand for Culvert foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.
68.25
-
42905.89
... More
S1;Manufacture, Supplying and delivery of 110mm Dia. M.S. FLANGES for jointing conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
32
-
6253.44
... More
S1;Plastering 12 mm thick Single coat with C.M. (1:4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., for finished item of work inclusive of all taxes etc., complete
135
-
46537.2
... More
S1;Supplying and fixing of 100mm Dia. B Class G.I. Pipe properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for Motors Section pipe lines.
30
-
25972.5
... More
S1;0.60 x 0.90 m Window::- Providing and Fixing of openable windows made of Pre-painted steel (base steel as per IS 513 of 0.58mm thick Galvanized as per IS 277 with zinc of 120 GSM ) primer coated with epoxy primer of 5-7 microns thick. finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and section for outer frame of 48 x 50mm, centre mullion of 48 x 50 mm section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stairless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, including 10mm square guard bars with 6" (152.4mm) pitch etc., complete for finished item of work. (Single shutter window 2'0" x 4'0" (609.6mm x 1219.2mm). Outer frame section size of 48 x 50mm shutter frame section size of 48 x 25mm.
1
-
3522.84
... More
S1;Filling with Gravel in trenches sides of foundations and Basements with initial lead in layeing not excuding 15cms thick consolidating each deposited layer by watering and ramming includings cost and conveyanced water to wrok site and all operational, incidental, labour charges, hire charges & T& P etc., complete for finished item of work for filling Basements. (APSS No.309 & 310).
7.45
-
362.77
... More
S1;Supplying and fixing of approved make Semi Automatic Star Delta Starter fitted in CRCA sheet enclosure suitable for 3 Phase, 415-V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No-volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete.
15
-
274516.56
... More
S1;Supplying and delivery of 110mm Dia. HDPE END CAPS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
5
-
727.15
... More
S1;VRCC M20 grade design mix concrete corresponding to IS-456 using BATCHING PLANT at site with stone aggregate of 20mm & 12.5mm nominal size hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, centering charges such as Steel Scaffolding Pipes, Jack Props, Steel Centering Plates, etc., mixing concrete, pumping of concrete,laying , levelling, vibrating with vibrator, curing etc., as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the department for VRCC COLUMNS.
0.92
-
10846.59
... More
S1;Manufacture, Supply and Delivery of 180mm 6Kgs/Sq.Cm Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation
350
-
220697.14
... More
S1;Formation of embankment with 50% of Gravel and 50% Of Sand and Spreading in uniform layers sectioning and consolidation with Static Road Roller to meet requirement of table 300-2 of MORT&H, including all hire and operational charges of T&P and seigniorage charges etc., complete for finished item of work as MORT&H specification 395 (4th revision) (Payment will be made based on level for finished item of work.)
3455.27
-
2240016.99
... More
S1;Supplying and fixing of 100mm Dia. B Class G.I. Pipe properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for Motors Section pipe lines.
135
-
116876.25
... More
S1;Plastering 12 mm thick Single coat with C.M. (1:3) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete for finished item of work inclusive of all taxes etc., complete.
7.5
-
2642.03
... More
S1;P.C.C. work of mix M15 Prop. 40 mm graed graded hard granite machine crushed metal incluidng cost and conveyance of all materials and water to work site and all labour charges, , laying, curing etc., complete for Drains bed.(1:2.5:5)
22
-
111692.11
... More
S1;RAYADURGAM CC ROADS Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Road works.
970.16
-
112363.93
... More
S1;Manufacture, Supplying and delivery of 160mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
2
-
2913.08
... More
S1;Supplying of classOD of 295 pipe SN 8 Double wall Corrogated (External annual corrugated &smooth internal wall) (DWC) piping system in accordance with IS 16098 (part-2) and conveying to work site rolling and lowering in to trenches,laying true to line and level and perfect linking at joints,testing and commissioning,including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing with all labour,all lead &lift including encasing the pipe alround to a depth of not less than 15cms with soft gravel or selected earth available from the excavation etc.,complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing)
300
-
341322
... More
S1;Manufacture, Supplying and delivery of 160mm Dia. M.S. FLANGES for jointing conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
4
-
1527
... More
S1;DOOR of SIZE 0.90 x 2.00 m:- Providing and fixing Door Frames fabricated from sections made of galvanized Stell powder coated (base steel as per IS-513, galvanized as per IS-277 with zinc of 120 grams/square meter), the factory made section are powder coated with pure polyester powder of 50-60 microns thick with total coated thickness of 1.25mm, size of Door Frame section of 105x60mm with a rebate of 38mm to accommodate 35mm thick Door Shutter with groove to insert gasket in the frame section, frame sectiion filled with polyurethane foam, cut to length and joined by way of welding each frame provided with :: (a) 2mm thick MS powder coated butt hinges of 100mm long - 3 Nos for Single Shutter, 6 Nos., for double shutter (b) CRCA electroplates stiffeners of 6 Nos - 3 in each vertical (c) 40mm x 200mm x 1.20mm hold fasts screwd to stiffeners - 6 Nos. with split end tail (d) Nylon Aldrops Receiver - 1 No. for Single shutter frame (e) Tie Road - 1 No. and supplying and fixing of Single Leaf Flush Door Shutter Solid bond Wood black Board type with Commercial ply on both faces of 30mm thick conforming to IS.2202 including cost of fixtures such as (i) 2 Nos.-250mm long M.S.powder coated Aldrops, (ii) 1 No.-250mm long 10mm Dia. M.S.Powder Coated Tower Bolt, (iii) 2 Nos.-125mm long M.S.powder coated Door Handles and (iv) 1 No. M.S.Powder coated Door Stopper and including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the department.
1
-
7688.84
... More
S1;Labour charges for jointing D.I pipes and valves with flanged ends excluding cost and joints materials such as bolts, nuts rubber packing, whilte lead including filling with water conveyance and all other chrges etc.,complete for 100mm Dia. Scour Valve.
4
-
1348.28
... More
S1;Construction of 3'-0" dia.(1524mm)Solid block masonry INSPECTION CHAMBER as per IS.4111, Part-I-1986 with CM(1:6)Prop. Fly-Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1:3)Prop., 12mm thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 5'-0" (1524mm) in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.
106
-
1131457.78
... More
S1;VRCC M20 grade design mix concrete corresponding to IS-456 using BATCHING PLANT at site with stone aggregate of 20mm & 12.5mm nominal size hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, centering charges such as Steel Scaffolding Pipes, Jack Props, Steel Centering Plates, etc., mixing concrete, pumping of concrete,laying , levelling, vibrating with vibrator, curing etc., as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the department for VRCC COLUMNS.
0.92
-
11198.86
... More
S1;Lowering and keeping in position of 100 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
2
-
384.22
... More
S1;Lowering and keeping in position of 200 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
2
-
1074.31
... More
S1;Labour charges for jointing D.I pipes and valves with flanged ends excluding cost and joints materials such as bolts, nuts rubber packing, whilte lead including filling with water conveyance and all other chrges etc.,complete for 100mm Dia. Sluice Valve.
36
-
11823.48
... More
S1;Supply and delivery of .D.I. Double Flanged Sluice Valves of 200mm Dia. conforming to IS-14846/2000 (with up to date amendments, if any) including gear arrangements as per test pressure having body, bonnet, dome, stool cover, wedge, stuffing box, gland, thrust plate cap/hand wheel with D.I., stem body seat ring, wedge facing ring, bushes, bolts, nuts,, pinion and pinion shaft with stainless steel (IS-6603), wedge nut, shoe,, channelwith leaded tin bronze (IS-318), gasket with neoprene rubbere gland packign rubber, gear, gear housing with cast steel etc., and including cost and conveyance of all materials to work site, loading, unloading traansportation charges and all other connected taxes etc., complete for finished item of work.(pn-1 (MPa)
2
-
57214.24
... More
S1;Supplying and fixing of approved make Semi Automatic Star Delta Starter fitted in CRCA sheet enclosure suitable for 3 Phase, 415-V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No-volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete.
9
-
164979.54
... More
S1;VRCC. M20 grade design mix concrete corresponding to IS-456 using WEIGH BATCHER / MIXER with 20mm and 12.50mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workt.,for GLSR SIDE WALLS.
13.83
-
218300.3
... More
S1;P.C.C. work of mix M15 Prop. 40 mm graed graded hard granite machine crushed metal incluidng cost and conveyance of all materials and water to work site and all labour charges, , laying, curing etc., complete for Drain bed.(1:2.5:5)
616
-
3115267.51
... More
S1;Painting to New Wood Work / Iron Work in two coats with Synthetic Enamel Paint in all shades of Grade-I having V&C (Volatile Organic Compound) content less than 50 grams/Liter of aprpoved brand and colour over one coat of Primary coat including cost and conveyance of all materials to work site and all operational, incidential and all labour charges such as sand paper, cleaning the surface, cost of brushes etc., complete for finished item of work as directed by the department (Three coats).
1.78
-
304.99
... More
S1;Lowering, Laying and Jointing of 110mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
960
-
44073.6
... More
S1;TRUNK MAIN Manufacture, Supply & Delivery of 250 mm Diameter Centrifugally Cast (Spun) Ductile Iron pressure pipes for water, gas and Sewage with Socket Spigot Ends Confirming to 8329- 2000 in standard working lengths of 4, 5, 5.5 & 6 m for classification K9 and K7 suitable for push - on joint (Rubber Gasket) Dejointing) with cement mortar lining inside the pipes with Outside Zinc Coating Rtaes are Exfactory excluding transporation, taxes and duties
3050
-
8338337.51
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, inD.Idental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for finished item of work for Water Supply Main Lines.
918
-
106320.92
... More
S1;Supply and Transportation of 10 HP, 20-24 Stage, 5 star rated vertical Submersible Motor Pumpset, confirming to IS.8034 and motor confirming to IS.9283 with water proof winding, Pump shall be suitable for various delivery dead and dischage with stainles steel shaft, Motor suitable for wrking on 415V (+)/(-) 10%, Three Phase 50 Hz AC supply, etc., complete for 6" Bore Well. Makes: Kirloskar/Crompton/Texmo/ CRI/KSB/Lubi/PSG/ Aryen Varsha
5
-
334307.02
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Ordinary Rock)
9.75
-
1430.37
... More
S1;Supplying and Erecting of Penel Mounting 125A, 4 Pole, 25KA, MCCB waith thermal magnetic setting/Microprocessor vased release arrangement with all connections etc., complete on existing penel.
2
-
24599.56
... More
S1;P.C.C. work of mix M15 Prop. 40 mm graed graded hard granite machine crushed metal incluidng cost and conveyance of all materials and water to work site and all labour charges, , laying, curing etc., complete for Drain side walls.(1:2.5:5)
1327.74
-
10177419.2
... More
S1;VRCC M20 grade design mix concrete corresponding to IS-456 using BATCHING PLANT at site with stone aggregate of 20mm & 12.5mm nominal size machine crushed hard granite metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, centering charges such as casurina ballies, bamboos, wooden reapers, runners, wood posts, Wall Plates, Steel centering plates etc., mixing concrete, pumping of concrete, laying, levelling, vibrating with vibrator, curing etc., as per standard specifications but excluding cost of steel and its fabrication charges etc., for finished item of work to the required strength as directed by the department for VRCC FOOTINGS.
0.49
-
4364.14
... More
S1;External HDPE PIPES : Manufacture, Supply & Delivery of Centrifugally Cast (Spun) Ductile Iron pressure pipes for water, gas and Sewage with Socket Spigot Ends Confirming to 8329- 2000 in standard working lengths of 4, 5, 5.5 & 6 m for classification K9 and K7 suitable for push - on joint (Rubber Gasket) Dejointing) with cement mortar lining inside the pipes with Outside Zinc Coating Rtaes are Exfactory excluding transporation, taxes and duties
200
-
392198
... More
S1;VRCC M20 grade design mix concrete corresponding to IS-456 using BATCHING PLANT at site with stone aggregate of 20mm & 12.5mm nominal size hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, centering charges such as Steel Scaffolding Pipes, Jack Props, Steel Centering Plates, etc., mixing concrete, pumping of concrete,laying concrete, levelling, vibrating with vibrator, curing etc., as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept.,for ROOF SLABS.
1.4
-
16490.6
... More
S1;Supply and delivery of D.I. D/F 100 mm Dia. Semi D.Ircular Bends for scour valve as per speD.Ifications of IS No.,7181/1986, 5531/1988 & 3950/1979 inlcuding cost and conveyance loading unloading and all other connected taxes etc., complete for finished item of work (each of 32.11 kgs weight).
4
-
17295.28
... More
S1;Providing High Yield Strenth Deformed STEEL bars/TMT (Fe.415 Grade as per IS1786- 1985 and Fe.250 grade as per IS.432 and as amended upto date) of different of diameters including labour charges for cutting, bending to required size, shapes, placing in position with cover blocks of approved materials and size and tying firmly with M.S.Binding wire of 20 SWG forming grills for reinforce- ment work as per approved designs and drawings including cost and conveyance of mild steel bars, including all wastage, such as over laps, welding joints, chairs, space bars and all incidental, Operational labour charges, including sales and other taxes on all materials etc., complete for finished item of work in all floors (payment will be made on the basis of wieght of fabrication deformed bars only) (No re-rolled steel shall be allowed) complete for (8mm to 40mm).
3.34
-
276967.31
... More
S1;PCC(1:4:8)Prop.with 40mm guage graded hard broken granite machine crushed metal including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges for laying, tamping,curing machine mixing etc.,complete for Bed of Flooring and Foundations.
1.15
-
4539.33
... More
S1;Labour charges for jointing DI pipes and valves with Double flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a lead upto 500 Mts. and testing to required pressure and including cost and conveyance of all materials to site of work and all other chrges etc.,complete for 200mm dia D.I. Sluice Valve.
4
-
2108.24
... More
S1;Lowering, Laying and Jointing of 110mm Dia. HDPE Pipes by but fusion welding as per IS.7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete for finished item of work.
500
-
23943.75
... More
S1;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Drains walls.
232.4
-
1751408.23
... More
S1;Filling with Sand for Basements and sides of Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work
7.54
-
6944.74
... More
S1;Labour charges for jointing DI pipes and valves with Double flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a lead upto 500 Mts. and testing to required pressure and including cost and conveyance of all materials to site of work and all other chrges etc.,complete for 150mm Dia.Sluice Valve.
4
-
1945.2
... More
S1;180mm dia. PVC Casing pipe perforation charge
488
-
166896
... More
S1;Manufacture, Supplying and delivery of 200mm Dia. M.S. FLANGES for jointing conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
4
-
2785.84
... More
S1;PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing, seigniorage charges and all other taxes etc., complete for Bed of Foundations.
7.54
-
28916.46
... More
S1;Providing High Yield Strenth Deformed STEEL bars/TMT (Fe.415 Grade as per IS1786- 1985 and Fe.250 grade as per IS.432 and as amended upto date) of different of diameters including labour charges for cutting, bending to required size, shapes, placing in position with cover blocks of approved materials and size and tying firmly with M.S.Binding wire of 20 SWG forming grills for reinforce- ment work as per approved designs and drawings including cost and conveyance of mild steel bars, including all wastage, such as over laps, welding joints, chairs, space bars and all incidental, Operational labour charges, including sales and other taxes on all materials etc., complete for finished item of work in all floors (payment will be made on the basis of wieght of fabrication deformed bars only) (No re-rolled steel shall be allowed) complete for (8mm to 40mm).
0.33
-
27160.02
... More
S1;Construction of un-reinforced, design mix M 30 grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixer laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T&P etc., curing of concrete slabs for 14- days as per Design & drawing and Technical Specification Clause 1501 MORD.(As per APDSS and as directed by the Departmental Authorities) for Block Approaches.
-
-
-
... More
S1;Labour charges for jointing DI pipes and valves with Double flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a lead upto 500 Mts. and testing to required pressure and including cost and conveyance of all materials to site of work and all other chrges etc.,complete for 150mm Dia.Sluice Valve.
4
-
1966.84
... More
S1;Manufacture, Supplying and delivery of 110mm Dia. HDPE Pipe of Pressure 8.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
960
-
332668.8
... More
S1;Supplying and Run of 4 of 56/0.3mm (4.0 Sq.mm.) insulated flexible copper cable of Gold medal/ standard/million/suncab make in the existing metalic/Non metalic conduit pipe including all materials and all labour charges etc., complete for Motors connection.
225
-
47641.5
... More
S1;DOOR of SIZE 0.90 x 2.00 m:- Providing and fixing Door Frames fabricated from sections made of galvanized Stell powder coated (base steel as per IS-513, galvanized as per IS-277 with zinc of 120 grams/square meter), the factory made section are powder coated with pure polyester powder of 50-60 microns thick with total coated thickness of 1.25mm, size of Door Frame section of 105x60mm with a rebate of 38mm to accommodate 35mm thick Door Shutter with groove to insert gasket in the frame section, frame sectiion filled with polyurethane foam, cut to length and joined by way of welding each frame provided with :: (a) 2mm thick MS powder coated butt hinges of 100mm long - 3 Nos for Single Shutter, 6 Nos., for double shutter (b) CRCA electroplates stiffeners of 6 Nos - 3 in each vertical (c) 40mm x 200mm x 1.20mm hold fasts screwd to stiffeners - 6 Nos. with split end tail (d) Nylon Aldrops Receiver - 1 No. for Single shutter frame (e) Tie Road - 1 No. and supplying and fixing of Single Leaf Flush Door Shutter Solid bond Wood black Board type with Commercial ply on both faces of 30mm thick conforming to IS.2202 including cost of fixtures such as (i) 2 Nos.-250mm long M.S.powder coated Aldrops, (ii) 1 No.-250mm long 10mm Dia. M.S.Powder Coated Tower Bolt, (iii) 2 Nos.-125mm long M.S.powder coated Door Handles and (iv) 1 No. M.S.Powder coated Door Stopper and including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the department.
1
-
7688.84
... More
S1;Construction of un-reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T&P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days as per design & drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities.cc pavement
870.63
-
5088205.85
... More
S1;PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing, seigniorage charges and all other taxes etc., complete for Bed of Foundations.
20.67
-
81989.97
... More
S1;VRCC M20 grade design mix concrete corresponding to IS-456 using BATCHING PLANT at site with stone aggregate of 20mm & 12.5mm nominal size machine crushed hard granite metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, centering charges such as casurina ballies, bamboos, wooden reapers, runners, wood posts, Wall Plates, Steel centering plates etc., mixing concrete,pumping of concrete,laying,levelling, vibrating with vibrator, curing etc., as per standard specifications but excluding cost of steel and its fabrication charges etc., for finished item of work to the required strength as directed by the department for VRCC PLINTH BEAMS.
0.63
-
7156.74
... More
S1;PCC(1:4:8)Prop.with 40mm guage graded hard broken granite machine crushed metal including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges for laying, tamping,curing machine mixing etc.,complete for Bed of Flooring and Foundations.
1.15
-
4412.68
... More
S1;Construction of 3'-0" dia.(1524mm)Solid block masonry INSPECTION CHAMBER as per IS.4111, Part-I-1986 with CM(1:6)Prop. Fly-Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1:3)Prop., 12mm thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 5'-0" (1524mm) in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.
22
-
234830.86
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Ordinary Rock)
388.06
-
56930.63
... More
S1;Supplying and fixing of 25mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows,tees,couplings,nipples,plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for Sump Railings.
105
-
32209.8
... More
S1;Construction of granular sub-base by providing Well graded material for grading III mixing in a Mechanical Mix Plant at OMC carriage mixed material to work site spreading in uniform layers with motor grader on prepared surface and compacting with 80-100 kN Vibratory Roller to achieve the desired density, complete as per Technical Specification of MORTH.
3395.27
-
3723490.75
... More
S1;Supply and delivery of D.I. D/F Scover Valves of 100 mm Dia. conforming to IS 14846/2000 with amendments No.1 &2 heavy duty with D.I grade FG 260 as per IS 210.Two coats of primer suitable for epozy paints finish shall be applied to all metal surface and finally two coats of Epoxy paint.The valve shall be tested for colsed end test against Hydrostatic test requirement of type P.N.I including cost and conveyance charges to work site loading & unloading and all other connected taxes etc., complete for finished item of work.
2
-
28344.68
... More
S1;GUNTAKAL CC ROADS: Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Road works.
3455.27
-
400189.37
... More
S1;Supply and Erection of Panel Mounting 125-A, 4 Pole, 25-KA, MCCB with thermal magnetic setting/Microprocessor based release arrangement with all connections etc., and supply of 125A 4 pole MCCB adjustable confirms to IS/IEC 60947-2 having breaking capacity 25-KA with Thermal Magnetic setting based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the dept., of make L&T/Schneider/Siemens/ Hager.
15
-
184849.4
... More
S1;Lowering and keeping in position of 100 mm Dia. SCOUR VALVE including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
2
-
384.22
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Hard Rock Blasting Prohibited)
519.59
-
377611.88
... More
S1;Labour charges for jointing DI pipes and valves with Double flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a lead upto 500 Mts. and testing to required pressure and including cost and conveyance of all materials to site of work and all other chrges etc.,complete for 200mm dia D.I. Sluice Valve.
2
-
1053.46
... More
S1;VRCC. M20 grade design mix concrete corresponding to IS-456 using WEIGH BATCHER / MIXER with 20mm and 12.50mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of worktt.,for GLSR TOP RING BEAM.
2.95
-
33818.46
... More
S1;Lowering, Laying and Jointing of 160mm Dia. D.I Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
800
-
54904
... More
S1;Supply and delivery of D.I.D/F SLUICE VALVES OF 250mm Dia. conforming to IS 14846/2000 with amendments No.1 & 2 heavy duty with D.I grade FG-260 as per IS 210.Two coats of primer suitable for epoxy paints finish shall be applied to all metal surface and finally two coats of Epoxy paint.The valve shall be tested for colsed end test against Hydrostatic test requirement of type PN-1 including cost and conveyance charges to work site loading & unloading and all other connected taxes etc., complete for finished item of work.
2
-
72961.28
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Hard Rock Blasting Prohibited)
56.43
-
41010.49
... More
S1;Supply and delivery of Bolts & Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values. ( No.of Bolts for each valve 8 Nos. and total weight of Bolts 1.50 Kg./8 Nos.)
27
-
3404.7
... More
S1;PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing and all other taxes etc., complete for Bed of Foundations.
951.2
-
3772592.37
... More
S1;Manufacture, Supplying and delivery of 200mm Dia. HDPE TEES conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
4
-
13083.92
... More
S1;Filling Sand for Culvert foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.
6.83
-
6289.52
... More
S1;Lowering and keeping in position of 80 mm Dia. AIR VALVE including conveyance of all materials to work site, nuts and bolts, rubber packing and white lead and all other charges etc., complete as per the direction of the department for finihsed item of work .
-
-
-
... More
S1;Supplying of classOD of 295 pipe SN 8 Double wall Corrogated (External annual corrugated &smooth internal wall) (DWC) piping system in accordance with IS 16098 (part-2) and conveying to work site rolling and lowering in to trenches,laying true to line and level and perfect linking at joints,testing and commissioning,including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing with all labour,all lead &lift including encasing the pipe alround to a depth of not less than 15cms with soft gravel or selected earth available from the excavation etc.,complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing)
180
-
204793.2
... More
S1;Plastering 12mm thick in Single Coat in CM(1:3)Prop. with sponge finishing including cost and conveyance of all materials and water to site of work and all operational, incidental charges, scaffolding charges, hacking surface and all labour charges, curing etc.,complete for finished item of work to the required strength as directed by the dept.,for CEILING
7.5
-
2613.15
... More
S1;Lowering and keeping in position of 80 mm Dia. AIR VALVE including conveyance of all materials to work site, nuts and bolts, rubber packing and white lead and all other charges etc., complete as per the direction of the department for finihsed item of work .
-
-
-
... More
S1;PCC(1:4:8)Prop.with 40mm guage graded hard broken granite machine crushed metal including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges for laying, tamping, curing machine mixing, seigniorage etc., complete for Bed of Culverts.
16.25
-
64142.65
... More
S1;Brick Masonry in C.M.(1:6) Prop. with Fly Ash cement solid blocks of size 290x225x140mm for manufacturing with compressive strength of 50 Kg/Sq.cm using fly ash, cement, gypsum and stone dust including cost and conveyance of all materials and water to work site, scaffolding and all labour charges,curing etc.,complete.
7.4
-
46161.65
... More
S1;Plastering 12 mm thick Single coat with C.M. (1:4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., for finished item of work inclusive of all taxes etc., complete
165
-
58578.3
... More
S1;Lowering and keeping in position of 80 mm Dia. AIR VALVE including conveyance of all materials to work site, nuts and bolts, rubber packing and white lead and all other charges etc., complete as per the direction of the department for finihsed item of work .
-
-
-
... More
S1;Site levelling :Filling with Excavated earth with initial lead in layers irrespective of thickness and consolidating each deposited layer using by watering including cost and conveyance all materials and water to work site and all operational charges, incidental charges and all labour charges, hire charges, complete for finished item of work.
2476.8
-
868053.68
... More
S1;Filling with SAND intrenches sides of Foundations and Basements with initial lead in layeing not excuding 15cms thick consolidating each deposited layer by watering and ramming includings cost and conveyanced water to wrok site and all operational, inD.Idental, labour charges, hire charges & T& P etc., complete for finished item of work (APSS No.309 & 310).
180.35
-
166202.38
... More
S1;Providing Impervious coat Plastering to exposed RCC Slab surface with CM(1:4) Prop.20mm thick mixed with approved water proofing compound @ 1 Kg/bag of cement and laid over roof when the slab is green and fine rendering with cement slurry including cost & conveyance of all materials and water to work site and all operational, incidental charges, labour charges for mixing mortar, laying rendering smooth and thread lining, curing, rounding of junctions of walls and slab etc., complete for finished item of work.
116.66
-
58777.61
... More
S1;Manufacture, Supplying and delivery of 160mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
2
-
2913.08
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Hard Rock Blasting Prohibited)
293.17
-
213062.67
... More
S1;Providing High Yield Strenth Deformed STEEL bars/TMT (Fe.415 Grade as per IS1786- 1985 and Fe.250 grade as per IS.432 and as amended upto date) of different of diameters including labour charges for cutting, bending to required size, shapes, placing in position with cover blocks of approved materials and size and tying firmly with M.S.Binding wire of 20 SWG forming grills for reinforce- ment work as per approved designs and drawings including cost and conveyance of mild steel bars, including all wastage, such as over laps, welding joints, chairs, space bars and all incidental, Operational labour charges, including sales and other taxes on all materials etc., complete for finished item of work in all floors (payment will be made on the basis of wieght of fabrication deformed bars only) (No re-rolled steel shall be allowed) complete for (8mm to 40mm).
0.12
-
9953.9
... More
S1;VRCC M20 grade design mix concrete corresponding to IS-456 using BATCHING PLANT at site with stone aggregate of 20mm & 12.5mm nominal size hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, centering charges such as Steel Scaffolding Pipes, Jack Props, Steel Centering Plates, etc., mixing concrete, pumping of concrete,laying, levelling, vibrating with vibrator, curing etc., as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the department for ROOF BEAMS.
0.63
-
7069.01
... More
S1;Filling Sand for Culvert foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.
152.55
-
140581.21
... More
S1;Supplying and fixing of RCC Cover of 22" Dia. of 3" thick with nominal reinforcement and hooks for lifting including cost and conveyance of all materials to work site and operational, incidental and all labour charges for fixing charges etc., complete for finiahed item of work.
2
-
1506.54
... More
S1;Supply and Transportation of 10 HP, 20-24 Stage, 5 star rated vertical Submersible Motor Pumpset, confirming to IS.8034 and motor confirming to IS.9283 with water proof winding, Pump shall be suitable for various delivery dead and dischage with stainles steel shaft, Motor suitable for wrking on 415V (+)/(-) 10%, Three Phase 50 Hz AC supply, etc., complete for 6" Bore Well. Makes: Kirloskar/Crompton/Texmo/ CRI/KSB/Lubi/PSG/ Aryen Varsha
15
-
1005882.17
... More
S1;Supplying of class OD of 180 pipe SN 8 Double wall Corrogated (External annual corrugated &smooth internal wall) (DWC) piping system in accordance with IS 16098 (part-2) and conveying to work site rolling and lowering in to trenches,laying true to line and level and perfect linking at joints,testing and commissioning,including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing with all labour,all lead &lift including encasing the pipe alround to a depth of not less than 15cms with soft gravel or selected earth available from the excavation etc.,complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing)
3230
-
1670652.9
... More
S1;Supply and Erection of Panel Mounting 125-A, 4 Pole, 25-KA, MCCB with thermal magnetic setting/Microprocessor based release arrangement with all connections etc., and supply of 125A 4 pole MCCB adjustable confirms to IS/IEC 60947-2 having breaking capacity 25-KA with Thermal Magnetic setting based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the dept., of make L&T/Schneider/Siemens/ Hager.
5
-
61510.37
... More
S1;CULVERTS Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Culverts.
68.25
-
7970.24
... More
S1;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE Pipe of Pressure 8.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding Excise duty, Sale Tax and speicals etc., complete for finished item of work. (above 90mm dia. straight length in 6mts.)
1600
-
1157964.08
... More
S1;Lowering, Laying and Jointing of 160mm Dia. D.I Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
810
-
56918.7
... More
S1;Supply and fixing to Cement JALLIES 40mm thick including cost and conveyance of all materials and water to work site and all operational, incidental charges, mxing, laying and all labour charges, curing with neat finishing etc., complete for finished item of work as directed by the dept.
0.35
-
102.2
... More
S1;Manufacture, Supplying and delivery of 63mm Dia. HDPE Pipe of Pressure 8.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
176
-
19997.12
... More
S1;Supply and delivery of 50 mm dia Gunmetal gate valve (GM Peet) as per IS-778 Class-I Indian make heavey type
22
-
82634.42
... More
S1;Supply and delivery of Rubber Packing including cost and conveyance of all materials to site of work etc., complete ( weight 0.44 Kgs. per joint .)
8.1
-
855.86
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, inD.Idental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for finished item of work for Water Supply Main Lines.
608.65
-
70493.38
... More
S1;Supplying and delivery of 160mm Dia. HDPE END CAPS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
2
-
720.32
... More
S1;RCC M20 grade design mix concrete corresponding to IS-456 using BATCHING PLANT at site with stone aggregate of 20mm & 12.5mm nominal size hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, centering charges such as Steel Scaffolding Pipes, Jack Props, Steel Centering Plates, etc., mixing concrete, pumping concrete, laying, levelling,curing etc., as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept.,for finished item of work for CHAJJAS (Sunshades) of average 50 mm thick (60mm thick at fixed end and 40mm thick at free end) including Plastering 12mm thick single coat in CM(1:5) Prop. and finished to average thickness of 50mm.
0.48
-
5610.36
... More
S1;Manufacture, Supplying and delivery of 200mm Dia. HDPE TEES conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
3
-
9812.94
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Ordinary Rock)
586.34
-
86019.15
... More
S1;VRCC. M20 grade Nominal mix concrete corresponding to IS-456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.,for precast Slabs of Drains.
79.45
-
469903.05
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Hard Rock Blasting Prohibited)
691.05
-
502223.29
... More
S1;Constuction of OHSR / ELSR of 500 KL capacity with staging of 22Mts. including fixtures and all the Concrete members shall be designed with M30 grade design mix with Raft Footings including 3 Coats of eppoxy paint food grade of best quality to inner surface of reservoir including roof and 2 Coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes, Bends,Valves etc., for pipe connections excluding cost of pipes Bends and Valves as per departmental designs and drawings but including cost and conveyance of all materials to work site and the above rate inclusive of following fixtures: A. RCC or Aluminum ladder inside 0.60 m wide B. Doglegged stair case shall be provided with stair case flight with of 1.2m C. Providing lightening arrester including conductor and earthing etc., complete-1No's D. RCC Ventilators with copper or Stainless steel fly proof Mesh E. DI Manhole frame and cover 0.6 X 0.6m as per IS specfications(Light duty)-2No's. F.Water level indicator of good quality with abonite/Copper float approved pattern-1.No's G. The Railing provided to gallery and staircase shall be with stainless steel of grade 304 for height of 1.2m H. The Dog Legged staircase shall be enclosed with Brick/CRS Wall on 3 sides and front side with MS collapsable gate upto 1st brace level from ground level.I.DI Swan neck ventilators in topdome and slab.
500
-
13435000
... More
S1;Supply, Transportation of 10.00HP Three Phase open well ISI Submersible Motor Pumpset (100x75) with makes adopted in sor. Including errection in GLSR.(WITH 35M HEAD)
9
-
428194.08
... More
S1;SEWAGE LINES :Supplying of class OD of 460 pipe SN 8 Double wall Corrogated (External annual corrugated &smooth internal wall) (DWC) piping system in accordance with IS 16098 (part-2) and conveying to work site rolling and lowering in to trenches,laying true to line and level and perfect linking at joints,testing and commissioning,including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing with all labour,all lead &lift including encasing the pipe alround to a depth of not less than 15cms with soft gravel or selected earth available from the excavation etc.,complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing)
-
-
-
... More
S1;Labour charges for jointing D.I pipes and valves with flanged ends excluding cost and joints materials such as bolts, nuts rubber packing, whilte lead including filling with water conveyance and all other chrges etc.,complete for 100mm Dia. Scour Valve.
4
-
1322.6
... More
S1;Construction of un-reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T&P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days as per design & drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities.cc pavement
1710.17
-
10214475.76
... More
S1;Labour charges for jointing DI pipes and valves with Double flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a lead upto 500 Mts. and testing to required pressure and including cost and conveyance of all materials to site of work and all other chrges etc.,complete for 200mm dia D.I. Sluice Valve.
2
-
1198.85
... More
S1;VRCC. M20 grade Nominal mix concrete corresponding to IS-456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.,for precast Slabs of Drains.
240.05
-
1444203.21
... More
S1;Manufacture, Supplying and delivery of 200mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
2
-
5662.58
... More
S1;Supplying of classOD of 235 pipe SN 8 Double wall Corrogated (External annual corrugated &smooth internal wall) (DWC) piping system in accordance with IS 16098 (part-2) and conveying to work site rolling and lowering in to trenches,laying true to line and level and perfect linking at joints,testing and commissioning,including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing with all labour,all lead &lift including encasing the pipe alround to a depth of not less than 15cms with soft gravel or selected earth available from the excavation etc.,complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing)
180
-
131252.4
... More
S1;Construction of Brick masonry Valve Pit of size 3'-0" x 3'-0" required for sluice valves, scour valves & Air Valves including all D.Ivil works such as earth work excavation up to 1.32 mts ,4" thick PCC(1:5:10)Prop., brick masonry in CM(1:8) Prop.,12mm thick plastering in CM(1:4) including 4"thick RCC M30 Grade design mix with necessary reinforcemnt including cost of steel and its fabrication chares for cover slab, and smooth rendering etc., complete as directed by department.
2
-
26960.18
... More
S1;Filling with Stone Crusher Dust for site levelling with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental and all labour charges etc., complete for finished item of work for irrespective of thickness.
8.6
-
6722.18
... More
S1;Supplying of classOD of 235 pipe SN 8 Double wall Corrogated (External annual corrugated &smooth internal wall) (DWC) piping system in accordance with IS 16098 (part-2) and conveying to work site rolling and lowering in to trenches,laying true to line and level and perfect linking at joints,testing and commissioning,including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing with all labour,all lead &lift including encasing the pipe alround to a depth of not less than 15cms with soft gravel or selected earth available from the excavation etc.,complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing)
275
-
200524.5
... More
S1;Providing High Yield Strenth Deformed STEEL bars / TMT (Fe.415 Grade & Fe.500 Grade as per IS1786 and as amended upto date) of different of diameters including labour charges for cutting, bending to required size, shapes, placing in position with cover blocks of approved materials and size and tying firmly with M.S.Binding wire of 20 SWG forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of mild steel bars, including all wastage, such as over laps, welding joints, chairs, space bars and all incidental, Operational labour charges, including sales and other taxes on all materials etc., complete for finished item of work in all floors (payment will be made on the basis of wieght of fabrication deformed bars only. No re-rolled steel shall be allowed) complete for (8mm to 40mm).
3.48
-
286487.76
... More
S1;Supply and delivery of D.I. D/F 100 mm Dia. Semi D.Ircular Bends for scour valve as per speD.Ifications of IS No.,7181/1986, 5531/1988 & 3950/1979 inlcuding cost and conveyance loading unloading and all other connected taxes etc., complete for finished item of work (each of 32.11 kgs weight).
-
-
-
... More
S1;Providing, laying, spreading and compacting graded WMM aggregate to wet mix macadam specification including cost, seigniorage of all material and including premixing the material with water at OMC in mechanical mixer Plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base course on well prepared surface and compacting with Vibratory roller of 8 to 10 to achieve the desired density etc., as directed by the Engineer-in-Charge and as per MORTH & H Specification for finished item of work.
6146.33
-
12143242.72
... More
S1;Lowering, Laying and Jointing of 200mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
330
-
34326.6
... More
S1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Drains.
166.5
-
638878.82
... More
S1;Manufacture, Supplying and delivery of 110mm Dia. HDPE TEES conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
5
-
2448.35
... More
S1;Filling Sand for Culvert foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.
924
-
651107.87
... More
S1;Supply and delivery of Bolts & Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values. ( No.of Bolts for each valve 8 Nos. and total weight of Bolts 1.50 Kg./8 Nos.)
19.5
-
2458.95
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Ordinary Rock)
608.65
-
89290.94
... More
S1;Filling with Sand for Basements and sides of Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work
7.54
-
5310.33
... More
S1;Supplying and Run of 4 of 56/0.3mm (4.0 Sq.mm.) insulated flexible copper cable of Gold medal/ standard/million/suncab make in the existing metalic/Non metalic conduit pipe including all materials and all labour charges etc., complete for Motors connection.
2925
-
619534.78
... More
S1;Providing, laying, spreading and compacting graded WMM aggregate to wet mix macadam specification including cost, seigniorage of all material and including premixing the material with water at OMC in mechanical mixer Plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base course on well prepared surface and compacting with Vibratory roller of 8 to 10 to achieve the desired density etc., as directed by the Engineer-in-Charge and as per MORTH & H Specification for finished item of work.
639.86
-
948125.35
... More
S1;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE Pipe of Pressure6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding Excise duty, Sale Tax and speicals etc., complete for finished item of work. (above 90mm dia. straight length in 6mts.)
800
-
578984
... More
S1;Supplying and fixing of 65mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for finished item of work for connection to GLSR
2875
-
2583747.12
... More
S1;Manufacture, Supplying and delivery of 110mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
2
-
1004.36
... More
S1;Painting to New Wood Work / Iron Work in two coats with Synthetic Enamel Paint in all shades of Grade-I having V&C (Volatile Organic Compound) content less than 50 grams/Liter of aprpoved brand and colour over one coat of Primary coat including cost and conveyance of all materials to work site and all operational, incidential and all labour charges such as sand paper, cleaning the surface, cost of brushes etc., complete for finished item of work as directed by the department (Three coats).
1.78
-
3049.92
... More
S1;Painting to new walls with snow cem or other equal and approved water proof cement paint 2 coats over priming coat with approved exterior grade cement making 3 coats all colours including cost and conveyance of all materials, labour charges etc; complete for finished item of work.
64.62
-
15348.07
... More
S1;PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing and all other taxes etc., complete for Bed of Foundations.
22
-
87255.08
... More
S1;Supplying of classOD of 295 pipe SN 8 Double wall Corrogated (External annual corrugated &smooth internal wall) (DWC) piping system in accordance with IS 16098 (part-2) and conveying to work site rolling and lowering in to trenches,laying true to line and level and perfect linking at joints,testing and commissioning,including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing with all labour,all lead &lift including encasing the pipe alround to a depth of not less than 15cms with soft gravel or selected earth available from the excavation etc.,complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing)
170
-
194835.3
... More
S1;VRCC. M20 grade design mix concrete corresponding to IS-456 using WEIGH BATCHER / MIXER with 20mm and 12.50mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workt.,for GLSR SIDE WALLS.
13.83
-
216946.51
... More
S1;Supplying of classOD of 235 pipe SN 8 Double wall Corrogated (External annual corrugated &smooth internal wall) (DWC) piping system in accordance with IS 16098 (part-2) and conveying to work site rolling and lowering in to trenches,laying true to line and level and perfect linking at joints,testing and commissioning,including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing with all labour,all lead &lift including encasing the pipe alround to a depth of not less than 15cms with soft gravel or selected earth available from the excavation etc.,complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing)
540
-
396640.8
... More
S1;Supply and Erection of PANEL MOUNTING 125-A, 4 Pole, 25-KA, MCCB adjustable of make L&T/Schneider/Siemens/Legrand/Hager confirms to IS/IEC 60847-2 having breaking capacity 35/36-KA with Thermal Magnetic setting/ Microprocessor based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the department.
10
-
123232.72
... More
S1;Pump Room : Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308). (Ordinary soils-Mechcanical Means-Upto 3 m depth)
6.4
-
741.25
... More
S1;Site levelling :Filling with Excavated earth with initial lead in layers irrespective of thickness and consolidating each deposited layer using by watering including cost and conveyance all materials and water to work site and all operational charges, incidental charges and all labour charges, hire charges, complete for finished item of work.
3001
-
1023830.53
... More
S1;P.C.C. work of mix M15 Prop.20 mm to 10mm hard broken granite machine crushed metal incluidng cost and conveyance of all materials and water to work site and all labour charges, , laying, curing etc., complete for Drain bed .(1:2.5:5)
166.5
-
822962.94
... More
S1;Supply and delivery of D.I.D/F SLUICE VALVES OF 200mm Dia. conforming to IS 14846/2000 with amendments No.1 & 2 heavy duty with D.I grade FG-260 as per IS 210.Two coats of primer suitable for epoxy paints finish shall be applied to all metal surface and finally two coats of Epoxy paint.The valve shall be tested for colsed end test against Hydrostatic test requirement of type PN-1 including cost and conveyance charges to work site loading & unloading and all other connected taxes etc., complete for finished item of work.
1
-
28607.12
... More
S1;PUMP ROOM Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308). (Ordinary soils-Mechcanical Means-Upto 3 m depth)
6.4
-
747.39
... More
S1;Supplying of classOD of 347 pipe SN 8 Double wall Corrogated (External annual corrugated &smooth internal wall) (DWC) piping system in accordance with IS 16098 (part-2) and conveying to work site rolling and lowering in to trenches,laying true to line and level and perfect linking at joints,testing and commissioning,including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing with all labour,all lead &lift including encasing the pipe alround to a depth of not less than 15cms with soft gravel or selected earth available from the excavation etc.,complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing)
320
-
484636.8
... More
S1;OUT FALL DRAIN Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Foundation of RCC Storm Water Drains.
209
-
24407.02
... More
S1;Providing High Yield Strenth Deformed STEEL bars/TMT (Fe.415 Grade as per IS1786- 1985 and Fe.250 grade as per IS.432 and as amended upto date) of different of diameters including labour charges for cutting, bending to required size, shapes, placing in position with cover blocks of approved materials and size and tying firmly with M.S.Binding wire of 20 SWG forming grills for reinforce- ment work as per approved designs and drawings including cost and conveyance of mild steel bars, including all wastage, such as over laps, welding joints, chairs, space bars and all incidental, Operational labour charges, including sales and other taxes on all materials etc., complete for finished item of work in all floors (payment will be made on the basis of wieght of fabrication deformed bars only) (No re-rolled steel shall be allowed) complete for (8mm to 40mm).
0.22
-
17771
... More
S1;Supplying and fixing of 25mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows,tees,couplings,nipples,plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for Sump Railings.
105
-
32209.8
... More
S1;VRCC. M20 grade design mix concrete corresponding to IS-456 using WEIGH BATCHER / MIXER with 20mm and 12.50mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of worktt.,for GLSR TOP RING BEAM.
1.71
-
19128.77
... More
S1;Painting to new walls with snow cem or other equal and approved water proof cement paint 2 coats over priming coat with approved exterior grade cement making 3 coats all colours including cost and conveyance of all materials, labour charges etc; complete for finished item of work.
67.5
-
16102.22
... More
S1;Construction of un-reinforced, design mix M 30 grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixer laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T&P etc., curing of concrete slabs for 14- days as per Design & drawing and Technical Specification Clause 1501 MORD.(As per APDSS and as directed by the Departmental Authorities) for Block Approaches.
106.95
-
591483.47
... More
S1;Lowering, Laying and Jointing of 110mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
3230
-
148289.3
... More
S1;Providing Independent Earthing from Main switch Board for earth continuity with No.8, G.I wire including excavation of earth in hard gravel/hard desintegrated rock upto 5'-6'' depth below ground level of section 5'x2'x3' duly providing 40mm Dia G.I Pipe of 2mts, length using GI bolts&nuts and fixing earth wire including supply and fixing 1'-6'' dia 0'-8'' depth hume pipe ring and refilling the pit with 4 Kgs hard coke, 20Kgs salt and excavated earth including all labour charges etc., complete for finished item of work.
1
-
4302.43
... More
S1;KERB Manufacture,supply and delivery of unplasticised 160mm dia PVC pipes 4 KG/SQCMfor potable water supplies conforming to IS:4985/2000 include of transportation to the sub divisional stores anywhere in AP exculding excise duty and sales tax etc., (4kg/cm2)
2195
-
857884.14
... More
S1;Manufacture, Supplying and delivery of 200mm Dia. M.S. FLANGES for jointing conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
4
-
2785.84
... More
S1;Brick Masonry in C.M.(1:6) Prop. with Fly Ash cement solid blocks of size 290x225x140mm for manufacturing with compressive strength of 50 Kg/Sq.cm using fly ash, cement, gypsum and stone dust including cost and conveyance of all materials and water to work site, scaffolding and all labour charges,curing etc.,complete.
7.4
-
46936.04
... More
S1;Cost and supply of 175 mm dia. PVC blue casing pipe including transportation to the work site.
305
-
352275
... More
S1;Supply and delivery of D.I. D/F 100 mm Dia. Duck Foot Bends for scour valve as per speD.Ifications of IS No.,7181/1986, 5531/1988 & 3950/1979 inlcuding cost and conveyance loading unloading and all other connected taxes etc., complete for finished item of work (each of 26 kgs weight).
-
-
-
... More
S1;Lowering and keeping in position of 150 mm Dia. Sluice Valve including conveyance of all materials to work site, nuts and bolts, rubber packing and white lead and all other charges etc., complete as per the direction of the department for finihsed item of work .
2
-
678.42
... More
S1;Laying PCC work of mix (1:3:6) Prop.using 20mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing, seigniorage charges and all other taxes etc., complete for Drains walls.
163.8
-
1255563.04
... More
S1;Supply and delivery of Bolts & Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values. ( No.of Bolts for each valve 8 Nos. and total weight of Bolts 1.50 Kg./8 Nos.)
33
-
4161.3
... More
S1;Providing Independent Earthing from Main switch Board for earth continuity with No.8, G.I wire including excavation of earth in hard gravel/hard desintegrated rock upto 5'-6'' depth below ground level of section 5'x2'x3' duly providing 40mm Dia G.I Pipe of 2mts, length using GI bolts&nuts and fixing earth wire including supply and fixing 1'-6'' dia 0'-8'' depth hume pipe ring and refilling the pit with 4 Kgs hard coke, 20Kgs salt and excavated earth including all labour charges etc., complete for finished item of work.
1
-
4332.4
... More
S1;Supplying and fixing of approved make Semi Automatic Star Delta Starter fitted in CRCA sheet enclosure suitable for 3 Phase, 415-V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No-volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete.
5
-
91505.52
... More
S1;Filling Sand for Culvert foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.
59.4
-
41856.8
... More
S1;VRCC. M20 grade design mix concrete corresponding to IS-456 using WEIGH BATCHER / MIXER with 20mm and 12.50mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of worktt.,for GLSR TOP DOME SLAB.
10.8
-
172312.83
... More
S1;Plastering 12mm thick in Single Coat in CM(1:4)Prop. with sponge finishing including cost and conveyance of all materials and water to site of work and all operational, incidental charges, scaffolding charges, hacking surface and all labour charges, curing etc., complete for finished item of work to the required strength as directed by the dept., for INTERNAL WALLS and EXTERNAL WALLS..
64.62
-
22026.34
... More
S1;Supply, Transportation of 10.00 HP Three Phase ISI Submersible Motor Pumpset (20-24 Stage) with makes adopted in sor.
10
-
642113.25
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Hard Rock Blasting Prohibited)
151.92
-
110407.82
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, inD.Idental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for finished item of work for Water Supply Main Lines.
3629.5
-
420361.41
... More
S1;Supplying of classOD of 347 pipe SN 8 Double wall Corrogated (External annual corrugated &smooth internal wall) (DWC) piping system in accordance with IS 16098 (part-2) and conveying to work site rolling and lowering in to trenches,laying true to line and level and perfect linking at joints,testing and commissioning,including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing with all labour,all lead &lift including encasing the pipe alround to a depth of not less than 15cms with soft gravel or selected earth available from the excavation etc.,complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing)
-
-
-
... More
S1;Forming embankment with 50% of Gravel and 50% of Sand by mechanical means with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning including Cost and conveyance of all materials, all hire and operational charges of T&P etc., complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m as directed by the Departmental Authorities for Side Berms
6917.5
-
3577315.95
... More
S1;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
102.61
-
8030070.06
... More
S1;Supplying and delivery of 110mm Dia. HDPE END CAPS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
3
-
436.29
... More
S1;Refilling the pipe line trenches with excavated earth complying with standard speD.Ification after the pipe laid including all leads and lifts, depositing surplus earth watering, tamping, levelling and forming to the original level including labour charges etc., complete as directed by the department.
787.32
-
173428.3
... More
S1;Constuction of OHSR / ELSR of 500 KL capacity with staging of 22Mts. including fixtures and all the Concrete members shall be designed with M30 grade design mix with Raft Footings including 3 Coats of eppoxy paint food grade of best quality to inner surface of reservoir including roof and 2 Coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes, Bends,Valves etc., for pipe connections excluding cost of pipes Bends and Valves as per departmental designs and drawings but including cost and conveyance of all materials to work site and the above rate inclusive of following fixtures: A. RCC or Aluminum ladder inside 0.60 m wide B. Doglegged stair case shall be provided with stair case flight with of 1.2m C. Providing lightening arrester including conductor and earthing etc., complete-1No's D. RCC Ventilators with copper or Stainless steel fly proof Mesh E. DI Manhole frame and cover 0.6 X 0.6m as per IS specfications(Light duty)-2No's. F.Water level indicator of good quality with abonite/Copper float approved pattern-1.No's G. The Railing provided to gallery and staircase shall be with stainless steel of grade 304 for height of 1.2m H. The Dog Legged staircase shall be enclosed with Brick/CRS Wall on 3 sides and front side with MS collapsable gate upto 1st brace level from ground level.I.DI Swan neck ventilators in topdome and slab.
500
-
13435000
... More
S1;Manufacture, Supplying and delivery of 110mm Dia. HDPE TEES conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
10
-
4896.7
... More
S1;Labour charges for jointing DI pipes and valves with Double flanged ends including boring the main threading the bore and fixing nipple etc., excluding the cost of rubber insertions, bolts & nuts, Air Valves & Flanged tail piece etc., and including cost and conveyance of all materials to site of wo and all other chrges etc.,complete for 80mm Dia. Air Valve.
7
-
2428.85
... More
S1;DRAINS Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Foundation of RCC Storm Water Drains.
5746
-
671017.88
... More
S1;Labour charges for jointing DI pipes and valves with Double flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a lead upto 500 Mts. and testing to required pressure and including cost and conveyance of all materials to site of work and all other chrges etc.,complete for 200mm dia D.I. Sluice Valve.
4
-
2129.8
... More
S1;Formation of embankment with 50% of Gravel and 50% Of Sand and Spreading in uniform layers sectioning and consolidation with Static Road Roller to meet requirement of table 300-2 of MORT&H, including all hire and operational charges of T&P and seigniorage charges etc., complete for finished item of work as MORT&H specification 395 (4th revision) (Payment will be made based on level for finished item of work.)
1465.86
-
950302.38
... More
S1;Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), excluding the cost of the gasket but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987
-
-
-
... More
S1;Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding Excise duty, Sale Tax and speicals etc., complete for finished item of work. (above 90mm dia. straight length in 6mts.)
672
-
76352.64
... More
S1;APPROACH ROAD Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Road works.
511.88
-
59777.35
... More
S1;Labour charges for jointing DI pipes and valves with Double flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a lead upto 500 Mts. and testing to required pressure and including cost and conveyance of all materials to site of work and all other chrges etc.,complete for 200mm dia D.I. Sluice Valve.
4
-
2108.24
... More
S1;Manufacture, Supplying and delivery of 110mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
10
-
5021.8
... More
S1;RCC M20 grade design mix concrete corresponding to IS-456 using BATCHING PLANT at site with stone aggregate of 20mm & 12.5mm nominal size hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, centering charges such as Steel Scaffolding Pipes, Jack Props, Steel Centering Plates, etc., mixing concrete, pumping concrete, laying, levelling,curing etc., as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept.,for finished item of work for CHAJJAS (Sunshades) of average 50 mm thick (60mm thick at fixed end and 40mm thick at free end) including Plastering 12mm thick single coat in CM(1:5) Prop. and finished to average thickness of 50mm.
0.48
-
5773.24
... More
S1;Supplying and fixing of approved make Automatic Star Delta Starter fitted in CRCA sheet enclosure suitable for 3 Phase, 415-V, 50 Hz Motor Pump set, suitable for 7.50 HP to 15.00 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No-volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete.
10
-
183346.11
... More
S1;Supply, Transportation of 10.00HP Three Phase open well ISI Submersible Motor Pumpset (100x75) with makes adopted in sor. Including errection in GLSR.(WITH 35M HEAD)
2
-
94831.02
... More
S1;Trunk Main : Manufacture, Supply & Delivery of 200 mm Diameter Centrifugally Cast (Spun) Ductile Iron pressure pipes for water, gas and Sewage with Socket Spigot Ends Confirming to 8329- 2000 in standard working lengths of 4, 5, 5.5 & 6 m for classification K9 and K7 suitable for push - on joint (Rubber Gasket) Dejointing) with cement mortar lining inside the pipes with Outside Zinc Coating Rtaes are Exfactory excluding transporation, taxes and duties
800
-
1653355.92
... More
S1;Construction of granular sub-base by providing Well graded material for grading III mixing in a Mechanical Mix Plant at OMC carriage mixed material to work site spreading in uniform layers with motor grader on prepared surface and compacting with 80-100 kN Vibratory Roller to achieve the desired density, complete as per Technical Specification of MORTH.
511.88
-
585273.35
... More
S1;Supply & Fixing of 180mm dia. PVC Bore Cap
8
-
2520
... More
S1;Supply and delivery of D.I.D/F SLUICE VALVES OF 200mm Dia. conforming to IS 14846/2000 with amendments No.1 & 2 heavy duty with D.I grade FG-260 as per IS 210.Two coats of primer suitable for epoxy paints finish shall be applied to all metal surface and finally two coats of Epoxy paint.The valve shall be tested for colsed end test against Hydrostatic test requirement of type PN-1 including cost and conveyance charges to work site loading & unloading and all other connected taxes etc., complete for finished item of work.
2
-
57214.24
... More
S1;Manufacture, Supplying and delivery of 110mm Dia. M.S. FLANGES for jointing conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
10
-
1954.2
... More
S1;OUT FALL DRAIN Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Foundation of RCC Storm Water Drains.
112.86
-
13071.45
... More
S1;Supply and delivery of D.I. D/F Sluice valves of 100 mm Dia. conforming to IS 14846/2000 with amendments No.1 & 2 heavy duty with D.I grade FG 260 as per IS 210.Two coats of primer suitable for epoxy paints finish shall be applied to all metal surface and finally two coats of Epoxy paint.The valve shall be tested for colsed end test against Hydrostatic test requirement of type P.N.I including cost and conveyance charges to work site loading & unloading and all other connected taxes etc., complete for finished item of work.
7
-
99206.38
... More
S1;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
236.62
-
18517238.16
... More
S1;Supplying and fixing of RCC Cover of 22" Dia. of 3" thick with nominal reinforcement and hooks for lifting including cost and conveyance of all materials to work site and operational, incidental and all labour charges for fixing charges etc., complete for finiahed item of work.
2
-
1506.54
... More
S1;Supply and delivery of D.I. D/F Sluice valves of 100 mm Dia. conforming to IS 14846/2000 with amendments No.1 & 2 heavy duty with D.I grade FG 260 as per IS 210.Two coats of primer suitable for epoxy paints finish shall be applied to all metal surface and finally two coats of Epoxy paint.The valve shall be tested for colsed end test against Hydrostatic test requirement of type P.N.I including cost and conveyance charges to work site loading & unloading and all other connected taxes etc., complete for finished item of work.
10
-
141723.4
... More
S1;Cost and supply of 175 mm dia. PVC blue casing pipe including transportation to the work site.
915
-
1056825
... More
S1;Supplying and Erecting of Penel Mounting 125A, 4 Pole, 25KA, MCCB waith thermal magnetic setting/Microprocessor vased release arrangement with all connections etc., complete on existing penel.
9
-
110888.19
... More
S1;Forming embankment with 50% of Gravel and 50% of Sand by mechanical means with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning including Cost and conveyance of all materials, all hire and operational charges of T&P etc., complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m as directed by the Departmental Authorities for Side Berms
447.89
-
231621.83
... More
S1;Providing, laying, spreading and compacting graded WMM aggregate to wet mix macadam specification including cost, seigniorage of all material and including premixing the material with water at OMC in mechanical mixer Plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base course on well prepared surface and compacting with Vibratory roller of 8 to 10 to achieve the desired density etc., as directed by the Engineer-in-Charge and as per MORTH & H Specification for finished item of work.
4078.15
-
7812226.48
... More
S1;Supply and delivery of D.I. D/F Sluice valves of 150 mm Dia. conforming to IS 14846/2000 with amendments No.1 & 2 heavy duty with D.I grade FG 260 as per IS 210.Two coats of primer suitable for epoxy paints finish shall be applied to all metal surface and finally two coats of Epoxy paint.The valve shall be tested for colsed end test against Hydrostatic test requirement of type P.N.I including cost and conveyance charges to work site loading & unloading and all other connected taxes etc., complete for finished item of work.
2
-
44091.7
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Ordinary Rock)
303.84
-
44574.61
... More
S1;Supply and delivery of D.I. D/F 100 mm Dia. Duck Foot Bends for scour valve as per speD.Ifications of IS No.,7181/1986, 5531/1988 & 3950/1979 inlcuding cost and conveyance loading unloading and all other connected taxes etc., complete for finished item of work (each of 26 kgs weight).
-
-
-
... More
S1;Manufacture, Supplying and delivery of 160mm Dia. M.S. FLANGES for jointing conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
4
-
1527
... More
S1;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
58.65
-
4590207.92
... More
S1;Laying PCC work of mix (1:3:6) Prop.using 20mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing, seigniorage charges and all other taxes etc., complete for Drains Bed
4.55
-
22489.38
... More
S1;Supplying of class OD of 180 pipe SN 8 Double wall Corrogated (External annual corrugated &smooth internal wall) (DWC) piping system in accordance with IS 16098 (part-2) and conveying to work site rolling and lowering in to trenches,laying true to line and level and perfect linking at joints,testing and commissioning,including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing with all labour,all lead &lift including encasing the pipe alround to a depth of not less than 15cms with soft gravel or selected earth available from the excavation etc.,complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing)
960
-
493430.4
... More
S1;Labour charges for jointing D.I pipes and valves with flanged ends excluding cost and joints materials such as bolts, nuts rubber packing, whilte lead including filling with water conveyance and all other chrges etc.,complete for 100mm Dia. Sluice Valve.
10
-
3307.1
... More
S1;Supply and delivery of D.I. D/F Sluice valves of 150 mm Dia. conforming to IS 14846/2000 with amendments No.1 & 2 heavy duty with D.I grade FG 260 as per IS 210.Two coats of primer suitable for epoxy paints finish shall be applied to all metal surface and finally two coats of Epoxy paint.The valve shall be tested for colsed end test against Hydrostatic test requirement of type P.N.I including cost and conveyance charges to work site loading & unloading and all other connected taxes etc., complete for finished item of work.
4
-
88183.4
... More
S1;Supply and delivery of D.I. D/F 100 mm Dia. Semi D.Ircular Bends for scour valve as per speD.Ifications of IS No.,7181/1986, 5531/1988 & 3950/1979 inlcuding cost and conveyance loading unloading and all other connected taxes etc., complete for finished item of work (each of 32.11 kgs weight).
-
-
-
... More
S1;Supplying and fixing of 100mm Dia. B class G.I. Pipe properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for Motors Section pipe lines.
500
-
153380.25
... More
S1;DRAINS Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Foundation of RCC Storm Water Drains.
1707.2
-
197727.9
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Foundation of Buildings.
840
-
97288.8
... More
S1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Drains.
29.7
-
113962.17
... More
S1;PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing, seigniorage charges and all other taxes etc., complete for Bed of Foundations.
7.54
-
29746.4
... More
S1;Construction of 3'-0" dia.(1524mm)Solid block masonry INSPECTION CHAMBER as per IS.4111, Part-I-1986 with CM(1:6)Prop. Fly-Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1:3)Prop., 12mm thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 3'-0" (1524mm) in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.
22
-
149222.04
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Hard Rock Blasting Prohibited)
635.24
-
461657.58
... More
S1;Supplying and fixing of RCC Cover of 22" Dia. of 3" thick with nominal reinforcement and hooks for lifting including cost and conveyance of all materials to work site and operational, incidental and all labour charges for fixing charges etc., complete for finiahed item of work.
2
-
1506.54
... More
S1;Supplying and fixing of 100mm Dia. B Class G.I. Pipe properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for Motors Section pipe lines.
30
-
25972.5
... More
S1;PCC(1:4:8)Prop.with 40mm guage graded hard broken granite machine crushed metal including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges for laying, tamping, curing machine mixing, seigniorage etc., complete for Bed of Culverts.
45.5
-
180459.37
... More
S1;Forming embankment with 50% of Gravel and 50% of Sand by mechanical means with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning including Cost and conveyance of all materials, all hire and operational charges of T&P etc., complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m as directed by the Departmental Authorities for Side Berms
3386.25
-
1906018.54
... More
S1;Forming embankment with 50% of Gravel and 50% of Sand by mechanical means with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning including Cost and conveyance of all materials, all hire and operational charges of T&P etc., complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m as directed by the Departmental Authorities for Side Berms
973.1
-
667128.17
... More
S1;GLSR Earth work excavation for foundations and deposting on bank with an initial lead of 10 Mts. and lift of 2 Mts. in sand or loose soils, wet sand not under water, silt in canals, channels and drains etc., and including all operational incidental labour charges such as shoring sheeting, planking, strutting etc., complete for finished item of work.
135.64
-
15709.59
... More
S1;Lowering and keeping in position of 150 mm Dia. Sluice Valve including conveyance of all materials to work site, nuts and bolts, rubber packing and white lead and all other charges etc., complete as per the direction of the department for finihsed item of work .
2
-
651.22
... More
S1;Supplying and delivery of 110mm Dia. HDPE END CAPS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
9
-
1308.87
... More
S1;Supplying and fixing of approved make Semi Automatic Star Delta Starter fitted in CRCA sheet enclosure suitable for 3 Phase, 415-V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No-volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete.
2
-
36595.38
... More
S1;Manufacture, Supplying and delivery of 63mm Dia. HDPE Pipe of Pressure 8.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
848
-
96349.76
... More
S1;Providing High Yield Strenth Deformed STEEL bars/TMT (Fe.415 Grade as per IS1786- 1985 and Fe.250 grade as per IS.432 and as amended upto date) of different of diameters including labour charges for cutting, bending to required size, shapes, placing in position with cover blocks of approved materials and size and tying firmly with M.S.Binding wire of 20 SWG forming grills for reinforce- ment work as per approved designs and drawings including cost and conveyance of mild steel bars, including all wastage, such as over laps, welding joints, chairs, space bars and all incidental, Operational labour charges, including sales and other taxes on all materials etc., complete for finished item of work in all floors (payment will be made on the basis of wieght of fabrication deformed bars only) (No re-rolled steel shall be allowed) complete for (8mm to 40mm).
1.18
-
97000.07
... More
S1;Lowering, Laying and Jointing of 110mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
1900
-
87229
... More
S1;VRCC M20 grade design mix concrete corresponding to IS-456 using BATCHING PLANT at site with stone aggregate of 20mm & 12.5mm nominal size hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, centering charges such as Steel Scaffolding Pipes, Jack Props, Steel Centering Plates, etc., mixing concrete, pumping of concrete,laying, levelling, vibrating with vibrator, curing etc., as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the department for ROOF BEAMS.
0.63
-
6889.72
... More
S1;Manufacture, Supplying and delivery of 160mm Dia. M.S. FLANGES for jointing conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
4
-
1527
... More
S1;Lowering and keeping in position of 200 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
2
-
1074.34
... More
S1;Providing High Yield Strenth Deformed STEEL bars/TMT (Fe.415 Grade as per IS1786- 1985 and Fe.250 grade as per IS.432 and as amended upto date) of different of diameters including labour charges for cutting, bending to required size, shapes, placing in position with cover blocks of approved materials and size and tying firmly with M.S.Binding wire of 20 SWG forming grills for reinforce- ment work as per approved designs and drawings including cost and conveyance of mild steel bars, including all wastage, such as over laps, welding joints, chairs, space bars and all incidental, Operational labour charges, including sales and other taxes on all materials etc., complete for finished item of work in all floors (payment will be made on the basis of wieght of fabrication deformed bars only) (No re-rolled steel shall be allowed) complete for (8mm to 40mm).
9.6
-
789986.98
... More
S1;Laying PCC work of mix (1:3:6) Prop.using 20mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing, seigniorage charges and all other taxes etc., complete for Drains Bed
16.25
-
82180.35
... More
S1;Supply and delivery of Rubber Packing including cost and conveyance of all materials to site of work etc., complete ( weight 0.44 Kgs. per joint .)
19.8
-
2091.67
... More
S1;Supplying and Run of 4 of 56/0.3mm (4.0 Sq.mm.) insulated flexible copper cable of Gold medal/ standard/million/suncab make in the existing metalic/Non metalic conduit pipe including all materials and all labour charges etc., complete for Motors connection.
50
-
10508
... More
S1;Lowering, Laying and Jointing of 160mm Dia. HDPE Pipes by but fusion welding as per IS.7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete for finished item of work.
1600
-
113038.69
... More
S1;Laying PCC work of mix (1:3:6) Prop.using 20mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing, seigniorage charges and all other taxes etc., complete for Drains walls.
16.38
-
123442.63
... More
S1;Supplying of classOD of 347 pipe SN 8 Double wall Corrogated (External annual corrugated &smooth internal wall) (DWC) piping system in accordance with IS 16098 (part-2) and conveying to work site rolling and lowering in to trenches,laying true to line and level and perfect linking at joints,testing and commissioning,including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing with all labour,all lead &lift including encasing the pipe alround to a depth of not less than 15cms with soft gravel or selected earth available from the excavation etc.,complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing)
200
-
305114
... More
S1;Providing High Yield Strenth Deformed STEEL bars/TMT (Fe.415 Grade as per IS1786- 1985 and Fe.250 grade as per IS.432 and as amended upto date) of different of diameters including labour charges for cutting, bending to required size, shapes, placing in position with cover blocks of approved materials and size and tying firmly with M.S.Binding wire of 20 SWG forming grills for reinforce- ment work as per approved designs and drawings including cost and conveyance of mild steel bars, including all wastage, such as over laps, welding joints, chairs, space bars and all incidental, Operational labour charges, including sales and other taxes on all materials etc., complete for finished item of work in all floors (payment will be made on the basis of wieght of fabrication deformed bars only) (No re-rolled steel shall be allowed) complete for (8mm to 40mm).
3.18
-
261464.13
... More
S1;Laying PCC work of mix (1:3:6) Prop.using 20mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing, seigniorage charges and all other taxes etc., complete for Drains walls.
58.5
-
447309.14
... More
S1;RCC M20 grade design mix concrete corresponding to IS-456 using BATCHING PLANT at site with stone aggregate of 20mm & 12.5mm nominal size hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, centering charges such as Steel Scaffolding Pipes, Jack Props, Steel Centering Plates, etc., mixing concrete, pumping concrete, laying, levelling,curing etc., as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept.,for finished item of work for CHAJJAS (Sunshades) of average 50 mm thick (60mm thick at fixed end and 40mm thick at free end) including Plastering 12mm thick single coat in CM(1:5) Prop. and finished to average thickness of 50mm.
0.48
-
5657.06
... More
S1;Filling with SAND in trenches sides of Foundations and Basements with initial lead in layeing not excuding 15cms thick consolidating each deposited layer by watering and ramming includings cost and conveyanced water to wrok site and all operational, inD.Idental, labour charges, hire charges & T& P etc., complete for finished item of work (APSS No.309 & 310).
388.88
-
274024.66
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Hard Rock Blasting Prohibited)
2.73
-
1984.03
... More
S1;Supply and delivery of D.I. D/F AIR VALVES OF 80mm Dia. conforming to IS 14846/2000 with amendments No.1 & 2 heavy duty with D.I grade FG-260 as per IS 210.Two coats of primer suitable for epoxy paints finish shall be applied to all metal surface and finally two coats of Epoxy paint.The valve shall be tested for colsed end test against Hydrostatic test requirement of type PN-1 including cost and conveyance charges to work site loading & unloading and all other connected taxes etc., complete for finished item of work.
2
-
25720.16
... More
S1;Labour charges for jointing DI pipes and valves with Double flanged ends including boring the main threading the bore and fixing nipple etc., excluding the cost of rubber insertions, bolts & nuts, Air Valves & Flanged tail piece etc., and including cost and conveyance of all materials to site of wo and all other chrges etc.,complete for 80mm Dia. Air Valve.
-
-
-
... More
S1;Filling Sand for Culvert foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.
249.75
-
230155.08
... More
S1;Supplying and Run of 4 of 56/0.3mm (4.0 Sq.mm.) insulated flexible copper cable of Gold medal/ standard/million/suncab make in the existing metalic/Non metalic conduit pipe including all materials and all labour charges etc., complete for Motors connection.
1560
-
327963.79
... More
S1;Labour charges for jointing DI pipes and valves with Double flanged ends including boring the main threading the bore and fixing nipple etc., excluding the cost of rubber insertions, bolts & nuts, Air Valves & Flanged tail piece etc., and including cost and conveyance of all materials to site of wo and all other chrges etc.,complete for 80mm Dia. Air Valve.
-
-
-
... More
S1;Lowering and keeping in position of 80 mm Dia. AIR VALVE including conveyance of all materials to work site, nuts and bolts, rubber packing and white lead and all other charges etc., complete as per the direction of the department for finihsed item of work .
2
-
289.32
... More
S1;Plastering 12 mm thick Single coat with C.M. (1:4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., for finished item of work inclusive of all taxes etc., complete
97.5
-
33234.83
... More
S1;Lowering, Laying and Jointing of 63mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
176
-
5869.6
... More
S1;ANANTAPUR ROADS Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Road works.
5186.63
-
605694.65
... More
S1;Supplying and Run of 4 of 56/0.3mm (4.0 Sq.mm.) insulated flexible copper cable of Gold medal/ standard/million/suncab make in the existing metalic/Non metalic conduit pipe including all materials and all labour charges etc., complete for Motors connection.
975
-
204977.37
... More
S1;Refilling the pipe line trenches with excavated earth complying with standard speD.Ification after the pipe laid including all leads and lifts, depositing surplus earth watering, tamping, levelling and forming to the original level including labour charges etc., complete as directed by the department.
1578
-
361213.39
... More
S1;Providing Impervious coat Plastering to exposed RCC Slab surface with CM(1:4) Prop.20mm thick mixed with approved water proofing compound @ 1 Kg/bag of cement and laid over roof when the slab is green and fine rendering with cement slurry including cost & conveyance of all materials and water to work site and all operational, incidental charges, labour charges for mixing mortar, laying rendering smooth and thread lining, curing, rounding of junctions of walls and slab etc., complete for finished item of work.
116.66
-
58147.65
... More
S1;Lowering and keeping in position of 100 mm Dia. SCOUR VALVE including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
2
-
384.22
... More
S1;Lowering, Laying and Jointing of 200mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
200
-
20272
... More
S1;0.60 x 0.90 m Window::- Providing and Fixing of openable windows made of Pre-painted steel (base steel as per IS 513 of 0.58mm thick Galvanized as per IS 277 with zinc of 120 GSM ) primer coated with epoxy primer of 5-7 microns thick. finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and section for outer frame of 48 x 50mm, centre mullion of 48 x 50 mm section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stairless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, including 10mm square guard bars with 6" (152.4mm) pitch etc., complete for finished item of work. (Single shutter window 2'0" x 4'0" (609.6mm x 1219.2mm). Outer frame section size of 48 x 50mm shutter frame section size of 48 x 25mm.
1
-
3522.84
... More
S1;Filling Sand for Culvert foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.
24.38
-
17176.14
... More
S1;180mm dia. PVC Casing pipe perforation charge
915
-
312930
... More
S1;TRUNK MAIN Manufacture, Supply & Delivery of 200 mm Diameter Centrifugally Cast (Spun) Ductile Iron pressure pipes for water, gas and Sewage with Socket Spigot Ends Confirming to 8329- 2000 in standard working lengths of 4, 5, 5.5 & 6 m for classification K9 and K7 suitable for push - on joint (Rubber Gasket) Dejointing) with cement mortar lining inside the pipes with Outside Zinc Coating Rtaes are Exfactory excluding transporation, taxes and duties
-
-
-
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Ordinary Rock)
2.73
-
400.5
... More
S1;Lowering, Laying and Jointing of 200mm Dia. DI Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
800
-
98448.03
... More
S1;250 mm Dia. D.I. pipes .
508
-
287907.93
... More
S1;P.C.C. work of mix M15 Prop. 40 mm graed graded hard granite machine crushed metal incluidng cost and conveyance of all materials and water to work site and all labour charges, , laying, curing etc., complete for Drain bed.(1:2.5:5)
39.6
-
200267.2
... More
S1;DRAINS Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Foundation of RCC Storm Water Drains.
402.3
-
46594.39
... More
S1;Supply and delivery of D.I. D/F AIR VALVES OF 80mm Dia. conforming to IS 14846/2000 with amendments No.1 & 2 heavy duty with D.I grade FG-260 as per IS 210.Two coats of primer suitable for epoxy paints finish shall be applied to all metal surface and finally two coats of Epoxy paint.The valve shall be tested for colsed end test against Hydrostatic test requirement of type PN-1 including cost and conveyance charges to work site loading & unloading and all other connected taxes etc., complete for finished item of work.
7
-
154320.98
... More
S1;Providing, laying, spreading and compacting graded WMM aggregate to wet mix macadam specification including cost, seigniorage of all material and including premixing the material with water at OMC in mechanical mixer Plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base course on well prepared surface and compacting with Vibratory roller of 8 to 10 to achieve the desired density etc., as directed by the Engineer-in-Charge and as per MORTH & H Specification for finished item of work.
1191.48
-
2282434.83
... More
S1;Painting to New Wood Work / Iron Work in two coats with Synthetic Enamel Paint in all shades of Grade-I having V&C (Volatile Organic Compound) content less than 50 grams/Liter of aprpoved brand and colour over one coat of Primary coat including cost and conveyance of all materials to work site and all operational, incidential and all labour charges such as sand paper, cleaning the surface, cost of brushes etc., complete for finished item of work as directed by the department (Three coats).
1.78
-
304.99
... More
S1;CC Culverts: Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Culverts.
2.73
-
316.19
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Foundation of Buildings.
303.84
-
35190.75
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Hard Rock Blasting Prohibited)
27.13
-
19714.98
... More
S1;Lowering and keeping in position of 100 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
2
-
384.22
... More
S1;Plastering 12 mm thick Single coat with C.M. (1:4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete for finished item of work inclusive of all taxes etc., complete.
64.62
-
22275.12
... More
S1;Supplying and Erecting of Penel Mounting 125A, 4 Pole, 25KA, MCCB waith thermal magnetic setting/Microprocessor vased release arrangement with all connections etc., complete on existing penel.
2
-
24599.56
... More
S1;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Side Drains (Hard Rock Blasting Prohibited)
194.03
-
141012.7
... More
S1;Geological Survey charges excluding taxes for Plain Area
8
-
10400
... More
S1;Supplying and Run of U/S Circuit Mains by mean run of 4 of 56/0.3mm (4.00Sqmm) FRLS/HFFR/ ZHFR pvc insulated 1100V grade as per IS.694/190 specification for Copper Wire make KEI/ Polycab/Havells/GM/Gold Medal/Million/HPL/Power Flex/RPG/Anchor/Great White/Sun Cab/ Fortune Art/Great white/Orbit/V-Guard in the existing metalic/Non metalic conduit pipe for run of mains including all labour charges etc,complete.
500
-
105903.33
... More
S1;Supply and delivery of D.I. D/F 100 mm Dia. Duck Foot Bends for scour valve as per speD.Ifications of IS No.,7181/1986, 5531/1988 & 3950/1979 inlcuding cost and conveyance loading unloading and all other connected taxes etc., complete for finished item of work (each of 26 kgs weight).
3
-
10503.21
... More
S1;Labour charges for jointing DI pipes and valves with Double flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a lead upto 500 Mts. and testing to required pressure and including cost and conveyance of all materials to site of work and all other chrges etc.,complete for 150mm Dia.Sluice Valve.
4
-
1945.2
... More
S1;Manufacture, Supplying and delivery of 160mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
3
-
4369.62
... More
S1;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Drains walls.
64.8
-
488344.46
... More
S1;PCC(1:4:8)Prop.with 40mm guage graded hard broken granite machine crushed metal including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges for laying, tamping,curing machine mixing etc.,complete for Bed of Flooring and Foundations.
1.15
-
4561.06
... More
S1;Construction of un-reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T&P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days as per design & drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities.cc pavement
597.2
-
3592399.15
... More
S1;Lowering, Laying and Jointing of 200mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
250
-
25340
... More
S1;Supplying and fixing of 65mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for finished item of work for connection to GLSR
8625
-
7751241.36
... More
S1;Plastering 12mm thick in Single Coat in CM(1:3)Prop. with sponge finishing including cost and conveyance of all materials and water to site of work and all operational, incidental charges, scaffolding charges, hacking surface and all labour charges, curing etc.,complete for finished item of work to the required strength as directed by the dept.,for CEILING
7.5
-
2718.68
... More
S1;Construction of un-reinforced, design mix M 30 grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixer laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T&P etc., curing of concrete slabs for 14- days as per Design & drawing and Technical Specification Clause 1501 MORD.(As per APDSS and as directed by the Departmental Authorities) for Block Approaches.
253.2
-
1429034.98
... More
S1;Supply and delivery of D.I.D/F SLUICE VALVES OF 200mm Dia. conforming to IS 14846/2000 with amendments No.1 & 2 heavy duty with D.I grade FG-260 as per IS 210.Two coats of primer suitable for epoxy paints finish shall be applied to all metal surface and finally two coats of Epoxy paint.The valve shall be tested for colsed end test against Hydrostatic test requirement of type PN-1 including cost and conveyance charges to work site loading & unloading and all other connected taxes etc., complete for finished item of work.
-
-
-
... More
S1;Providing High Yield Strenth Deformed STEEL bars/TMT (Fe.415 Grade as per IS1786- 1985 and Fe.250 grade as per IS.432 and as amended upto date) of different of diameters including labour charges for cutting, bending to required size, shapes, placing in position with cover blocks of approved materials and size and tying firmly with M.S.Binding wire of 20 SWG forming grills for reinforce- ment work as per approved designs and drawings including cost and conveyance of mild steel bars, including all wastage, such as over laps, welding joints, chairs, space bars and all incidental, Operational labour charges, including sales and other taxes on all materials etc., complete for finished item of work in all floors (payment will be made on the basis of wieght of fabrication deformed bars only) (No re-rolled steel shall be allowed) complete for (8mm to 40mm).
18.15
-
1505925.77
... More
S1;0.60 x 0.90 m Window::- Providing and Fixing of openable windows made of Pre-painted steel (base steel as per IS 513 of 0.58mm thick Galvanized as per IS 277 with zinc of 120 GSM ) primer coated with epoxy primer of 5-7 microns thick. finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and section for outer frame of 48 x 50mm, centre mullion of 48 x 50 mm section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stairless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, including 10mm square guard bars with 6" (152.4mm) pitch etc., complete for finished item of work. (Single shutter window 2'0" x 4'0" (609.6mm x 1219.2mm). Outer frame section size of 48 x 50mm shutter frame section size of 48 x 25mm.
1
-
3522.84
... More
S1;VRCC M20 grade design mix concrete corresponding to IS-456 using BATCHING PLANT at site with stone aggregate of 20mm & 12.5mm nominal size machine crushed hard granite metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, centering charges such as casurina ballies, bamboos, wooden reapers, runners, wood posts, Wall Plates, Steel centering plates etc., mixing concrete, pumping of concrete, laying, levelling, vibrating with vibrator, curing etc., as per standard specifications but excluding cost of steel and its fabrication charges etc., for finished item of work to the required strength as directed by the department for VRCC FOOTINGS.
0.49
-
4238.72
... More
S1;PUMP ROOM Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308). (Ordinary soils-Mechcanical Means-Upto 3 m depth)
6.4
-
741.25
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements