Andhra Pradesh Township And Infrastructure Development Corporation Tender

Providing of Physical Infrastructure;Laying of PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing etc., complete as directed by the departmental authorities for Levelling Course for Bed of Drains.

Providing of Physical Infrastructure;Formation of Embankment with 70persentage Gravel and 30persentage Sand and Spreading in uniform layers sectioning and consolidation with vibratory Road Roller @ OMC to meet requirement of table 300 2 of MORTand H including all hire and operational charges of Tand P and seigniorage charges etc. complete for finished item of work as MORTand H specification 395 (4th revision) (Payment will be made based on level for finished item of work.)

Providing of Physical Infrastructure;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities

Providing of Physical Infrastructure;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement fine aggregate (sand) coarse aggregate water etc. to site and including all operational incidental and labour charges such as machine mixing centering laying concrete vibrating curing etc. complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authoritiesfor VRCC FOOTINGS.

Providing of Physical Infrastructure;Supply and fixing to Cement JALLIES 40mm thick including cost and conveyance of all materials and water to work site and all operational, incidental charges, mxing, laying and all labour charges, curing with neat finishing etc., complete for finished item of work as directed by the dept.

Providing of Physical Infrastructure;Supply and delivery of Rubber Packing including cost and conveyance of all materials to site of work etc., complete ( weight 0.44 Kgs. per joint .) as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Providing Laying Spreading and Compacting Graded Stone Aggregate to Wet Mix Macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill) carriage of mixed material by tipper to site of work laying in uniform layers in Sub Base/Base Course on a well prepared Sub Base and compacting with smooth wheel roller of 80 to 100 KN / Vibratory Roller 80 to100 KN weight to achieve the desired density including lighting barricading and maintenance of diversion etc. as per Tables.400.11 and 400.12 and technical specification Clause.406 MORD/MORTH as directed by the department and including cost and conveyance of all materials to site of work and all operational incidental seigniorage and all labour charges etc. complete for finished item of work

Providing of Physical Infrastructure;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational incidental charges and all labour charges hire charges of Tand P etc. complete for finished item of work and as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational incidental charges and all labour charges hire charges of Tand P etc. complete for finished item of work and as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick kerb channel 300 mm wide 50 mm thick in PCCM20 grade sloped towards the kerb kerb stone with channel laid with kerb laying machine foundation concrete laid manually all complete as per clause 408 MORTH

Providing of Physical Infrastructure;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational incidental labour charges Centering charges such as Steel Scaffolding pipes Jack props Steel centering plates etc. mixing concrete transportation pumping of concrete laying levelling curing etc. complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept. for GLSR TOP DOME SLAB.

Providing of Physical Infrastructure;Earth work excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities

Providing of Physical Infrastructure;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities.

Providing of Physical Infrastructure;Laying of PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing etc., complete as directed by the departmental authorities for Levelling Course for Bed of Drains.

Providing of Physical Infrastructure;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (250 mm I.D)

Providing of Physical Infrastructure;Manufacture, Supplying and delivery of 200mm Dia. HDPE TEES conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding Excise duty,Sale Tax and speicals etc.,complete for finished item of work as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per MORTH specification and as directed by the Engineer in Charge.

Providing of Physical Infrastructure;Construction of Granular Sub base by providing Well Graded material for Grading III spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with Vibratory Roller to achieve the desired density complete as per Technical Specification Clause 401 MORD / MORTH.(CBR Value Minimum 30) including Cost and conveyance of all materials all hire and operational charges of Tand P etc. complete for finished item of work as directed by the Departmental Authorities

Providing of Physical Infrastructure;Manufacture, Supplying and delivery of HDPE (PE 100 Grade) OD 90x110mm Dia. HDPE Reducers conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site, loading,unloading charges and including all taxes etc., complete for finished item of work. ( For each Stair case) as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Filling with SAND intrenches sides of Foundations and Basements with initial lead in layeing not excuding 15cms thick consolidating each deposited layer by watering and ramming includings cost and conveyanced water to wrok site and all operational incidental labour charges hire charges and Tand P etc. complete for finished item of work. as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Supply ,delivery and fixing of 50 mm dia Gunmetal gate valve (GM Peet) as per IS 778 Class I Indian make heavy type including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Labour charges for jointing 200mm Dia. Scour Valve with flanged ends including cost of joining material such as rubber insertion, white lead including filling with water with lead up to 500 meters and testing to required presure complete(Reference to specifications BIS No.3114/94).

Providing of Physical Infrastructure;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities.

Providing of Physical Infrastructure;Refilling the pipe line trenches with excavated earth complying with standard specification after the pipe laid including all leads and lifts, depositing surplus earth watering, tamping, levelling and forming to the original level including labour charges etc., complete as directed by the department as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading, unloading , forwarding charges, labour charges etc., but excluding Excise duty, Sale Tax and speicals etc., complete for finished item of work. (Supply up to 90 mm dia. in coil and above 90 mm dia. straight length.) as directed by the Departmental Authorities.

Providing of Physical Infrastructure;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges and all operational charges incidental machine mixing charges laying curing etc. complete as directed by the departmental authorities for Drain Bed.

Providing of Physical Infrastructure;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (250mm I.D)

Providing of Physical Infrastructure;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (150 mm I.D)

Providing of Physical Infrastructure;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement fine aggregate (sand) coarse aggregate water etc. to site all operational incidental and labour charges such as machine mixing laying concrete curing etc. complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering laying concrete vibrating curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Culvert Slab.

Providing of Physical Infrastructure;Providing Impervious coat Plastering to exposed RCC Slab surface with CM(1:4) Prop.20mm thick mixed with approved water proofing compound @ 1 Kg/bag of cement and laid over roof when the slab is green and fine rendering with cement slurry including cost and conveyance of all materials and water to work site and all operational, incidental charges, labour charges for mixing mortar, laying rendering smooth and thread lining, curing, rounding of junctions of walls and slab etc., complete for finished item of work.

Providing of Physical Infrastructure;Providing 25mm thick compacted semi dense bituminous concrete by hot mix plant using hard blasted granite crushed aggregate of grading II premixed with bituminous binder V.G.30 grade @ 5.00 per cent of mix and filler, transporting the hot mix to work site, laying with a Mechnical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification complete for finished item of work in all respects as directed by Engineer in charge. Note: The percent of bitumen is proposed for rate analysis only. The actual percent shall be arrived based on job mix formula.

Providing of Physical Infrastructure;Lowering and Laying of 200mm Dia. C.I./D.I. Pipes (all classes) and specials (fittings) with s/s ends caregully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply ( reference to specifications BIS.No.3114/1994). including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete for finished item of work.

Providing of Physical Infrastructure;Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom for finished item of work as per MORTH and H and as directed by the Engineer in Charge.

Providing of Physical Infrastructure;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities

Providing of Physical Infrastructure;Laying of PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing etc., complete as directed by the departmental authorities for Levelling Course for Bed of Drains.

Providing of Physical Infrastructure;Earth work excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities

Providing of Physical Infrastructure;Painting to new walls with snow cem or other equal and approved water proof cement paint 2 coats over priming coat with approved exterior grade cement making 3 coats all colours including cost and conveyance of all materials, labour charges etc; complete for finished item of work. GLSR WALLS

Providing of Physical Infrastructure;Painting to Doors and M.S.Grills with primer and two coats with Synthetic enamel paint in all shades of Grade I aprpoved brand and colour including cost and conveyance of all materials to work site and all operational, incidential and all labour charges such as sand paper, cleaning the surface, cost of brushes etc., complete for finished item of work as directed by the department (Three coats).

Providing of Physical Infrastructure;Lowering and keeping in position of 200 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work as directed by the Departmental Authorities.

Providing of Physical Infrastructure;RCC M 20 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement fine aggregate (sand) coarse aggregate water etc. to site including all operational incidental and labour charges such as machine mixing laying concrete curing centering and shuttering etc. complete but excluding cost of steel and its fabrication charges for finished item of work and as directed by the Departmental authorities for Pre cast Slab of Drains

Providing of Physical Infrastructure;Supply and delivery of Rubber Packing including cost and conveyance of all materials to site of work etc., complete ( weight 0.44 Kgs. per joint .) as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement fine aggregate (sand) coarse aggregate water etc. to site and including all operational incidental and labour charges such as machine mixing centering laying concrete vibrating curing etc. complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authoritiesfor ROOF SLABS.

Providing of Physical Infrastructure;Filling with Stone Crusher Dust for site levelling with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational incidental and all labour charges etc. complete for finished item of work for irrespective of thickness.

Providing of Physical Infrastructure;Supplying and fixing of RCC Cover of 22" Dia. of 3" thick with nominal reinforcement and hooks for lifting including cost and conveyance of all materials to work site and operational, incidental and all labour charges for fixing charges etc., complete for finiahed item of work.

Providing of Physical Infrastructure;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities

Providing of Physical Infrastructure;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational incidental labour charges Centering charges such as Steel Scaffolding pipes Jack props Steel centering plates etc. mixing concrete transportation pumping of concrete laying levelling curing etc. complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept. for GLSR TOP RING BEAM.

Providing of Physical Infrastructure;Supply and run of 4 of 56/0.3mm (4.00Sq.mm) FR P.V.C. insulated flexible copper cableFRLS/FRLS H/HFFR/ ZHFR PVC insulated 1100V grade as per IS.694/1990 specification for Copper Cable of Category II of make V Guard/Bonton /Finecab/ HPL /Million/Fortune Art /Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser/Beljin/ Rhino/ Standard / Vimal etc., including cost of cable, all materials and labour charges for fixing etc., complete as directed by the Department authorities.

Providing of Physical Infrastructure;Supplying and fixing of 25mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for Sump Railings.

Providing of Physical Infrastructure;E.L.S.R : Constuction of OHSR / ELSR of 800 KL capacity with staging of 22Mts. including fixtures and all the Concrete members shall be designed with M30 grade design mix with Raft Footings including 3 Coats of eppoxy paint food grade of best quality to inner surface of reservoir including roof and 2 Coats of weather proof Emulsion painting for external surfaces lettering all required fixtures Pipes Bends Valves etc. for pipe connections including cost of pipes Bends and Valves as per departmental designs and drawings and The ELSR shall be designed with minimum 2 Rows of Coloumns including cost and conveyance of all materials to work site and the above rate inclusive of following fixtures: A). Pipe Connections and special with DI Materials :1. All pipe connections for Inlet Outlet OverFlow Scour pipes shall be provided with D/F DI Material. 2.The valves for above pipe connections also shall be of DI material of PN 16 Duty confirming to the specifications of SoR item No.28 3. All Specials such as Bends Tees Reducers Duck foot Bends Bell mouths etc. shall be of DI material. Sizes of vertical pipe connections are: 3.1.Innlet Pipe: 300mm dia 3.2.Outlet Pipe: 350mm dia 3.3.Overflow Pipe: 300mm dia 3.4.Scour Pipe: 200mm dia. 3.5.DI Valves: 2No's C).Man Hole frames and covers made with CI/DI material with minimum size of 0.6X0.6 for roof and valve chambers. D). CI/DI double Swanneck ventilators(min of 150mm dia) in topdome and slab with flyproof necks 4No's E).RCC Finial ventilator with fly/bird protection with GI Mesh 1No's DI Manhole frame and cover 0.6 X 0.6m as per IS specfications(Light duty) 2No's. F).RCC Precast ladders of 0.6m width 2No's G). Doglegged stair case of 1m flight width and 1.2m landing width and RCC hand railing of 1m height 1No's (The Dog Legged staircase shall be enclosed with Brick/CRS Wall on 3 sides and front side with MS collapsable gate upto 1st brace level from ground level.) H).RCC Valve chambers as per standard Drawings with RCC Cover slab fixed with CI/DI man hole frame and cover with lock and key arrangment. The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls 150mm thick top slab 150mm thick base slab over base course of 100mm thick(1:4:8) prop. I).Balacony of 1.00m width at floor slab level/middle ring beam level by using Stainless steel pipe of grade 304 hand railing upto 1.20m height with top railing of 40.mm dia pipe and middle railing of 25mm dia and verticals with 40mm dia. at an interval not more than of 1.00m c/c. J).Water level indicator of reputed make Digital type(1.No) and conventional type(1.No) K).Lightening Arrestor with all its accessories complete including earthing with relevant IS Codes 1No's. Compound Wall: Construction of compound wall including ornamental M.S Gate of Size of 3.0X 2.40m is included in the basic rate of ELSRs.length of compound wall hall is maximum of 150m Min. height of the compound wall shall be 1.80m above plinth and thickness 230mm in brick masonry in CM(1:6).The compound wall shall be constructed including earth work excavation in all types of soils for plinth beam of 230mmX300mm and 0.75X0.75X1.20m size fo coloumn footing portions.The footing shall be of 0.75X0.75X0.25m in VRCC M20 grade and constructed over a C.C(1:4:8)prop bed of100mm thick.The coloumns shall be 230X230 mm in size with VRCC M20 Grade at 3.00m c/c spacing having depth of size of 1.20m below ground level and height of 2.00m above GL.The plinth beam of size of 230X300mm shall be constructed in VRCC M20 grade at ground level over a bed of CC(1:4:8) 100mm thick.450X450mm size coloumns in M20Grade shall be constructed for gate pillars.All the materials shall be followed as per the standards .Tie beam shall be provided above the brick work with 230X200mm size fixed with MS angular of 25mm X25mmX4mm in "Y" Shape to height of 0.60m with embedded length of 150mm in concrete.The braded wire fencing with 3 ply of 18 guages shall be streched in 4 rows(2X2).Plastering shall be done with 16mm thick in two coatsi.e. base coat 12mm thick in CM(1:6)prop and 4mm thick 2nd coat CM(1:4)prop on both sides of brick work. snowcern pain in two coats shall be provided for both sides of wall. The M.S ornamental gate as per the approved drawings shall be provided with minimum of 3.60mts widthe and 2.40mts height with enamel paint.Yard lighting shall be arranged on four corners of compound wall. If the length of the wall is increased/decreased.

Providing of Physical Infrastructure;Supply and delivery of Bolts and Nuts with double washers including cost and conveyance of all materials to site of work,shallok/White lead etc.,for flanged joints excluding labour charges for fixing values. ( No.of Bolts for each valve 8 Nos. and total weight of Bolts 1.50 Kg./8 Nos.) as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Plastering 12mm thick in Single Coat in CM(1:3)Prop. with sponge finishing including cost and conveyance of all materials and water to site of work and all operational, incidental charges, scaffolding charges, hacking surface and all labour charges, curing etc.,complete for finished item of work to the required strength as directed by the dept.,for CEILING

Providing of Physical Infrastructure;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement fine aggregate (sand) coarse aggregate water etc. to site and including all operational incidental and labour charges such as machine mixing centering laying concrete vibrating curing etc. complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authoritiesfor VRCC PLINTH BEAMS.

Providing of Physical Infrastructure;Supply and delivery of "Resilient Seated Soft Sealing" 200 mm dia Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or Equivalent as per IS1865, IS:3896 2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100persentage leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN 3202F4/BS:5163 Type A Flange drilling as per IS 1538 excluding all taxes, duties and transportation. (PN 1.6Mpa) as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Construction of 3' 0" Dia. (upto a depth of 0.90 Mts.) Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1:6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1:3)Prop., 1/2" thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 0.90 mts. (3' 0") in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification. (For Valve Chambers) as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Supply and Transportation of 10 H.P Three Phase Open Well Submersible Pumpset (100x75) make of Kirloskar/Crompton/ Texmo/KSB/Lubi of approved by the dept., suitable for errection in Open Well with water resistant dynamically balanced impeller with stainless steel shaft, sleeves, pump coupling and pivot of 3 Phase, 415 V, 50 Hz, A.C. Power supply, heavy copper winding with water proof insulation and high precision, strength not to be effected by chemical in water with suitable bronze bearings, 10 HP Pump errected with necessary H type clamps, nuts and bolts etc., of suitable size and strength and including cost and conveyance of all materials to site of work, transportation and all labour charges etc.,complete. (total =3 Nos. ie., 1 No. for pumping and 3 No for stand by )

Providing of Physical Infrastructure;Construction of un reinforced design mix M 30 grade cement concrete pavement 200 mm thick over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade) coarse and fine aggregates conforming to IS : 383 maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixer laid in approved fixed side formwork (steel channel laying and fixing of 125 micron thick polythene film wedges steel plates including levelling the formwork as per drawing) spreading the concrete with sholvels rakes compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials all hire and operational charges of Tand P etc. curing of concrete slabs for 14 days as per Design and drawing and Technical Specification Clause 1501 MORD.(As per APDSS and as directed by the Departmental Authorities) for Block Approach.

Providing of Physical Infrastructure;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (200 mm I.D)

Providing of Physical Infrastructure;Forming embankment with 70persentage of Gravel and 30persentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area removal of top soil excavation of soils at borrowed area conveyance of soil depositing the soils on the embankment spreading soils breaking clods sectioning including Cost and conveyance of all materials all hire and operational charges of Tand P etc. complete for finished item of work as per MoRTand H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities for Side Berms

Providing of Physical Infrastructure;Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 and 6 meter for classification K9 suitable for push on joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex factory, excluding transportation and all taxes. (200mm Dia K7 pipe) (GLSR to ELSR Connection) as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Refilling the pipe line trenches with excavated earth complying with standard specification after the pipe laid including all leads and lifts, depositing surplus earth watering, tamping, levelling and forming to the original level including labour charges etc., complete as directed by the department as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Lowering, Laying and Jointing of 200mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc.,complete for finished item of work as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Supplying and fixing of approved make Semi Automatic Star Delta Starter fitted in CRCA sheet enclosure suitable for 3 Phase, 415 V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete.

Providing of Physical Infrastructure;Earth work excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities

Providing of Physical Infrastructure;Brick Masonry in C.M.(1:6) Prop. with Fly Ash cement solid blocks of size 290x225x140mm for manufacturing with compressive strength of 50 Kg/Sq.cm using fly ash, cement, gypsum and stone dust including cost and conveyance of all materials and water to work site, scaffolding and all labour charges,curing etc.,complete.

Providing of Physical Infrastructure;Filling with Local Available Earth with initial lead in layers irrespective of thickness and consolidating each deposited layer using by watering including cost and conveyance all materials and water to work site and all operational charges incidental charges and all labour charges hire charges complete for finished item of work.

Providing of Physical Infrastructure;Providing and laying of 50mm thick bituminous macadam with HOT Mix Plant producing an average output of 37.50 tonnes per hour using hard blasted granate crushed aggregates of Grade.II premixed with bituminous binder of V.G. 30 grade @ 3.40persentage by weight of total mixer, transported to site laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction for finished item of work as directed by the Engineer in Charge including hire and operational charges all Tand P and all other contingent charges necessay including cost of seigniorage charges on all materials etc., complete and as per MORTH Specification. Note: Quantity of bitumen is proposed for rate analysis only. The actual quantity will deperd upon job mix formula.

Providing of Physical Infrastructure;Manufacture,supply and delivery of unplasticised 160mm dia PVC pipes for potable water supplies conforming to IS:4985/2000 include of transportation to the sub divisional stores anywhere in AP exculding excise duty and sales tax etc., (4kg/cm2)

Providing of Physical Infrastructure;Construction of 904.0 m (3' 0")Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1:6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1:3)Prop. 1/2" thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0") in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities

Providing of Physical Infrastructure;Construction of 3' 0" Dia. (upto a depth of 0.90 Mts.) Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1:6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1:3)Prop., 1/2" thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 0.90 mts. (3' 0") in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification. (For Valve Chambers) as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Supply and delivery of "Resilient Seated Soft Sealing" 200 mm dia Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or Equivalent as per IS1865, IS:3896 2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100persentage leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN 3202F4/BS:5163 Type A Flange drilling as per IS 1538 excluding all taxes, duties and transportation. (PN 1.6Mpa) as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities.

Providing of Physical Infrastructure;Formation of embankment with 70persentage Gravel 30persentage Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area removal of top soil excavation of soils at borrowed area conveyance of soil depositing the soils on the embankment spreading soils breaking clods sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300 2 of MoRTand H including all hire and operational charges of Tand P etc. complete for finished item of work as per MoRTand H specification 305 (4th revision) with a lead beyond 1000m. as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Construction of Granular Sub Base by Providing Coarse Graded Material (Grade III Material) spreading in uniform layers with motor grader with motor grader on prepared surface mixing by mix in place memthod with Rotavator at OMC and compacting with vibratory Roller to achieve the desired density etc. complete as per Clause.401 MORTH as directed bvy the department and including cost and conveyance of all materials to site of work and all operational incidential seigniorage and all labour charges etc. complete for finished item of work. (CBR Value minimum 20)

Providing of Physical Infrastructure;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges and all operational charges incidental machine mixing charges laying curing etc. complete as directed by the departmental authorities for Drain Bed.

Providing of Physical Infrastructure;Lowering, Laying and Jointing of 63mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc.,complete for finished item of work as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement fine aggregate (sand) coarse aggregate water etc. to site and including all operational incidental and labour charges such as machine mixing centering laying concrete vibrating curing etc. complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authoritiesfor ROOF BEAMS.

Providing of Physical Infrastructure;Filling with Gravel in trenches sides of foundations and Basements with initial lead in layeing not excuding 15cms thick consolidating each deposited layer by watering and ramming includings cost and conveyanced water to wrok site and all operational incidental labour charges hire charges and Tand P etc. complete for finished item of work for filling Basements

Providing of Physical Infrastructure;Lowering, Laying and Jointing of 32mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc.,complete for finished item of work as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Manufacture, Supplying and delivery of HDPE (PE 100 Grade) OD 63 mm Dia. HDPE End caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site, loading,unloading charges and including all taxes etc., complete for finished item of work as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading, unloading , forwarding charges, labour charges etc., but excluding Excise duty, Sale Tax and speicals etc., complete for finished item of work. (Supply up to 90 mm dia. in coil and above 90 mm dia. straight length.) as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Labour charges for jointing DI pipes and valves with Double flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a lead upto 500 Mts.and testing to required pressure including cost and conveyance of all materials to site of work and all other chrges etc.,complete for 200mm dia CI.Sluice Valve. as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Supplying and fixing of 100mm Dia. B class G.I. Pipe properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for Motors Section pipe lines.

Providing of Physical Infrastructure;Painting to Kerb with approved Synthetic enamel paint 2 coats over priming coat with approved exterior grade cement making 3 coats in all colours including cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Department authorities

Providing of Physical Infrastructure;Supply and delivery of Bolts and Nuts with double washers including cost and conveyance of all materials to site of work,shallok/White lead etc.,for flanged joints excluding labour charges for fixing values. ( No.of Bolts for each valve 8 Nos. and total weight of Bolts 1.50 Kg./8 Nos.) as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities

Providing of Physical Infrastructure;Lowering and keeping in position of 200 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities

Providing of Physical Infrastructure;Manufacture, Supplying and delivery of OD 63mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding Excise duty, Sale Tax and speicals etc., complete for finished item of work.(Supply up to 90 mm dia. in coil and above 90 mm dia. straight length.) as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Providing Independent Earthing from Main switch Board for earth continuity with No.8, G.I wire including excavation of earth in hard gravel/hard desintegrated rock upto 5' 6'' depth below ground level of section 5'x2'x3' duly providing 40mm Dia G.I Pipe of 2mts, length using GI boltsand nuts and fixing earth wire including supply and fixing 1' 6'' dia 0' 8'' depth hume pipe ring and refilling the pit with 4 Kgs hard coke, 20Kgs salt and excavated earth including all labour charges etc., complete for finished item of work.

Providing of Physical Infrastructure;Supply and Transportation of 10 H.P Three Phase Open Well Submersible Pumpset (100x75) make of Kirloskar/Crompton/ Texmo/KSB/Lubi of approved by the dept., suitable for errection in Open Well with water resistant dynamically balanced impeller with stainless steel shaft, sleeves, pump coupling and pivot of 3 Phase, 415 V, 50 Hz, A.C. Power supply, heavy copper winding with water proof insulation and high precision, strength not to be effected by chemical in water with suitable bronze bearings, 10 HP Pump errected with necessary H type clamps, nuts and bolts etc., of suitable size and strength and including cost and conveyance of all materials to site of work, transportation and all labour charges etc.,complete. (total = 2 Nos. ie., 1 No. for pumping and 1 Nos. for stand by )

Providing of Physical Infrastructure;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges and all operational charges incidental machine mixing charges laying curing etc. complete as directed by the departmental authorities for Drain Walls.

Providing of Physical Infrastructure;Supply and delivery of Centrifugally cast (spun) Ductile Iron 200 mm dia D/F 90 deg Duck foot bends confirming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000 (ex words) including cost and conveyance of all materials to work site and inlcuding loading, unloading and all other connected taxes etc., complete for finished item of work (Weight = 45.00 Kgs) as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities

Providing of Physical Infrastructure;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges and all operational charges incidental machine mixing charges laying curing etc. complete as directed by the departmental authorities for Drain Bed.

Providing of Physical Infrastructure;RCC M 20 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement fine aggregate (sand) coarse aggregate water etc. to site including all operational incidental and labour charges such as machine mixing laying concrete curing centering and shuttering etc. complete but excluding cost of steel and its fabrication charges for finished item of work and as directed by the Departmental authorities for Pre cast Slab of Drains

Providing of Physical Infrastructure;Supply and Erection of Panel Mounting 125 A, 4 Pole, 25 KA, MCCB with thermal magnetic setting/Microprocessor based release arrangement with all connections etc., and supply of 125A 4 pole MCCB adjustable confirms to IS/IEC 60947 2 having breaking capacity 25 KA with Thermal Magnetic setting based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the dept., of make Land T/Schneider/Siemens/Hager.

Providing of Physical Infrastructure;Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 and 6 meter for classification K9 suitable for push on joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex factory, excluding transportation and all taxes. (200mm Dia K9 pipe) (Trunk line from AMPTHIL Water Works at Vengalayapelem)

Providing of Physical Infrastructure;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement fine aggregate (sand) coarse aggregate water etc. to site and including all operational incidental and labour charges such as machine mixing centering laying concrete vibrating curing etc. complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for LINTELS.

Providing of Physical Infrastructure;Filling with Sand for Basements and sides of Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational incidental labour charges hire charges of Tand P etc. complete for finished item of work

Providing of Physical Infrastructure;Supply and delivery of C.I. D/F Scour Valves of 200 mm Dia. conforming to IS 14846/2000 with amendments No.1 and 2 heavy duty with CI grade FG 260 as per IS 210.Two coats of primer suitable for epozy paints finish shall be applied to all metal surface and finally two coats of Epoxy paint.The valve shall be tested for colsed end test against Hydrostatic test requirement of type P.N.I including cost and conveyance charges to work site loading and unloading and all other connected taxes etc., complete for finished item of work as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement fine aggregate (sand) coarse aggregate water etc. to site and including all operational incidental and labour charges such as machine mixing centering laying concrete vibrating curing etc. complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for Chajja's

Providing of Physical Infrastructure;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (150 mm I.D)

Providing of Physical Infrastructure;Manufacture, Supplying and delivery of OD 32mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding Excise duty, Sale Tax and speicals etc., complete for finished item of work.(Supply up to 90 mm dia. in coil and above 90 mm dia. straight length.) (From line to CPVC pipe connection at upto Ground for Each tank Connection) as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Labour charges for jointing 200mm Dia. Sluice Valve with flanged ends including cost of joining material such as rubber insertion, white lead including filling with water with lead up to 500 meters and testing to required presure complete(Reference to specifications BIS No.3114/94).

Providing of Physical Infrastructure;Supply and run of 4 of 56/0.3mm (4.00Sq.mm) FR P.V.C. insulated flexible copper cableFRLS/FRLS H/HFFR/ ZHFR PVC insulated 1100V grade as per IS.694/1990 specification for Copper Cable of Category II of make V Guard/Bonton /Finecab/ HPL /Million/Fortune Art /Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser/Beljin/ Rhino/ Standard / Vimal etc., including cost of cable, all materials and labour charges for fixing etc., complete as directed by the Department authorities.

Providing of Physical Infrastructure;Construction of un reinforced dowel jointed at expansion and construction joint only Design Mix M30 Grade cement concrete pavement 200 mm thick over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade) coarse and fine aggregates conforming to IS : 383 maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer laid in approved fixed side formwork (steel channel laying and fixing of 125 micron thick polythene film wedges steel plates including levelling the formwork as per drawing) spreading the concrete with sholvels rakes compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials all hire and operational charges of Tand P etc. provision of contraction and expansion construction joints applying debonding strips primer sealant dowel bars near approaches to bridge / culvert and construction joints admixtures as approved curing of concrete slabs for 14 days as per design and drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars (dowel bars) as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Manufacture, Supplying and delivery of 160mm Dia. HDPE TEES conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading, unloading , forwarding charges, labour charges etc., but excluding Excise duty,Sale Tax and speicals etc.,complete for finished item of work as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Supply and delivery of C.I. D/F AIR VALVES OF 50 mm Dia. conforming to IS 14846/2000 with amendments No.1 and 2 heavy duty with CI grade FG 260 as per IS 210.Two coats of primer suitable for epoxy paints finish shall be applied to all metal surface and finally two coats of Epoxy paint.The valve shall be tested for colsed end test against Hydrostatic test requirement of type PN 1 including cost and conveyance charges to work site loading and unloading and all other connected taxes etc., complete for finished item of work as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Plastering 12mm thick in Single Coat in CM(1:4)Prop. with sponge finishing including cost and conveyance of all materials and water to site of work and all operational, incidental charges, scaffolding charges, hacking surface and all labour charges, curing etc., complete for finished item of work to the required strength as directed by the dept., for INTERNAL WALLS and EXTERNAL WALLS..

Providing of Physical Infrastructure;Jointing CI/DI Pipes and Fittings with s/s ends including cost of pig lead, hemp yarn and sundries such as cost of fuel for melting lead, filing with water with lead upto 500m and testing to required perssure etc., complete (Reference to specifications BIS.No.3114/12288 1997) for 300mm Dia. DI Pipe.

Providing of Physical Infrastructure;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges and all operational charges incidental machine mixing charges laying curing etc. complete as directed by the departmental authorities for Drain Walls.

Providing of Physical Infrastructure;Door of size 3? 0? x 6? 6?: Providing and fixing Door Frames fabricated from sections made of galvanized Stell powder coated (base steel as per IS 513, galvanized as per IS 277 with zinc of 120 grams/square meter), the factory made section are powder coated with pure polyester powder of 50 60 microns thick with total coated thickness of 1.25mm, size of Door Frame section of 105x60mm with a rebate of 38mm to accommodate 30mm thick Door Shutter with groove to insert gasket in the frame section, frame sectiion filled with polyurethane foam, cut to length and joined by way of welding each frame provided with :: (a) 2mm thick MS powder coated butt hinges of 100mm long 3 Nos for Single Shutter, 6 Nos., for double shutter (b) CRCA electroplates stiffeners of 6 Nos 3 in each vertical (c) 40mm x 200mm x 1.20mm hold fasts screwd to stiffeners 6 Nos. with split end tail (d) Nylon Aldrops Receiver 1 No. for Single shutter frame (e) Tie Road 1 No. and supplying and fixing of Single Leaf Flush Door Shutter Solid bond Wood black Board type with Commercial ply on both faces of 30mm thick conforming to IS.2202 including cost of fixtures such as (i) 2 Nos. 250mm long M.S.powder coated Aldrops, (ii) 1 No. 250mm long 10mm Dia. M.S.Powder Coated Tower Bolt, (iii) 2 Nos. 125mm long M.S.powder coated Door Handles and (iv) 1 No. M.S.Powder coated Door Stopper and including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the department.

Providing of Physical Infrastructure;Lowering, Laying and Jointing of 250mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc.,complete for finished item of work as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities

Providing of Physical Infrastructure;Lowering and keeping in position of 200 mm Dia. SCOUR VALVE including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Manufacture, Supplying and delivery of 63mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding Excise duty,Sale Tax and speicals etc.,complete for finished item of work as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Manufacture, Supplying and delivery of 200mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding Excise duty,Sale Tax and speicals etc.,complete for finished item of work as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Manufacture, Supplying and delivery of HDPE (PE 100 Grade) OD 160x180mm Dia. HDPE Reducers conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site, loading,unloading charges and including all taxes etc., complete for finished item of work. ( For each Stair case) as directed by the Departmental Authorities.

Providing of Physical Infrastructure;PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing, seigniorage charges and all other taxes etc., complete for Bed of Foundations.

Providing of Physical Infrastructure;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational incidental charges and all labour charges hire charges of Tand P etc. complete for finished item of work and as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Manufacture, Supplying and delivery of 160mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding Excise duty,Sale Tax and speicals etc.,complete for finished item of work as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for finished item of work for Water Supply Main Lines. as directed by the Departmental Authorities.

Providing of Physical Infrastructure;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational incidental labour charges Centering charges such as Steel Scaffolding pipes Jack props Steel centering plates etc. mixing concrete transportation pumping of concrete laying levelling curing etc. complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept. for GLSR BOTTOM SLAB.

Providing of Physical Infrastructure;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement fine aggregate (sand) coarse aggregate water etc. to site and including all operational incidental and labour charges such as machine mixing centering laying concrete vibrating curing etc. complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authoritiesfor VRCC COLUMNS.

Providing of Physical Infrastructure;0.60 x 0.90 m Window:: Providing and Fixing of openable windows made of Pre painted steel (base steel as per IS 513 of 0.58mm thick Galvanized as per IS 277 with zinc of 120 GSM ) primer coated with epoxy primer of 5 7 microns thick. finish painted with a polyester paint of 12 16 microns thick and back coated with 5 7 microns thick alkyd backer and section for outer frame of 48 x 50mm, centre mullion of 48 x 50 mm section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stairless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, including 10mm square guard bars with 6" (152.4mm) pitch etc., complete for finished item of work. (Single shutter window 2'0" x 4'0" (609.6mm x 1219.2mm). Outer frame section size of 48 x 50mm shutter frame section size of 48 x 25mm.

Providing of Physical Infrastructure;PCC(1:4:8)Prop.with 40mm guage graded hard broken granite machine crushed metal including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges for laying, tamping,curing machine mixing etc.,complete for Bed of Flooring and Foundations.

Providing of Physical Infrastructure;Manufacture, Supplying and delivery of HDPE (PE 100 Grade) OD 200x225mm Dia. HDPE Reducers conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site, loading,unloading charges and including all taxes etc., complete for finished item of work. ( For each Stair case) as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Providing Laying Spreading and Compacting Graded Stone Aggregate to Wet Mix Macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill) carriage of mixed material by tipper to site of work laying in uniform layers in Sub Base/Base Course on a well prepared Sub Base and compacting with smooth wheel roller of 80 to 100 KN / Vibratory Roller 80 to 100 KN weight to achieve the desired density including lighting barricading and maintenance of diversion etc. as per Tables.400.11 and 400.12 and technical specification Clause.406 MORD/ MORTH as directed by the department and including cost and conveyance of all materials to site of work and all operational incidental seigniorage and all labour charges etc. complete for finished item of work.

Providing of Physical Infrastructure;Manufacture, Supplying and delivery of OD 250mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading, unloading , forwarding charges, labour charges etc., but excluding Excise duty, Sale Tax and speicals etc., complete for finished item of work. (Supply up to 90 mm dia. in coil and above 90 mm dia. straight length.) as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Supply and delivery of D.I. Double Flanged swing check type (Reflux Valves) Non Return Valves of 100 mm Dia. conforming to IS 5312 (Pts.1and 2 with amendments upto date, if any) having body, cover, door, bearing holder with D.I., Hinge pipe, Door pin, door suspension pin with stainless steel (IS.6603), body seat ring, door face ring, bearing bushes, plugs for hinge pin with leaded tin bronze (IS.318), bolts, nuts with carbon steel, gaskets with rubber, hinges with cast steel inlcuding cost and conveyance of all materials to work site and loading, unloading, transportation etc., complete as directed by the Departmental Authorities as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities Cost of DWC Pipe (200mm I.D)

Providing of Physical Infrastructure;Lowering, Laying and Jointing of 160mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc.,complete for finished item of work as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities

Providing of Physical Infrastructure;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.

Providing of Physical Infrastructure;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site and all operational incidental labour charges Centering charges such as Steel Scaffolding pipes Jack props Steel centering plates etc. mixing concrete transportation pumping of concrete laying levelling curing etc. complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept. for GLSR SIDE WALLS.

Providing of Physical Infrastructure;Filling with SAND intrenches sides of Foundations and Basements with initial lead in layeing not excuding 15cms thick consolidating each deposited layer by watering and ramming includings cost and conveyanced water to wrok site and all operational incidental labour charges hire charges and Tand P etc. complete for finished item of work. as directed by the Departmental Authorities.

Providing of Physical Infrastructure;Labor charges for fixing Air valves including boring the mains and threading the bore Fixing nipple etc., complete.as per the direction of the department for finihsed item of work.