Andhra Pradesh Township And Infrastructure Development Corporation Tender
... More
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Andhra Pradesh Township And Infrastructure Development Corporation - APTIDCO Tender
Opening Date17 Dec 2021
Closing Date6 Jan 2022
Tender Amount₹ 39,31,04,013
Costs
EMD
₹ 39,31,100Document Cost
Refer DocumentsTender Fee
₹ 30,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
463304Bid Award Id
ViewTender No
01/Dy.CTO/GUNTUR/APTIDCO/Infra/2021-22, Dated: 13-12-2021Tender Authority
Andhra Pradesh Township And Infrastructure Development Corporation ViewPurchaser Address
-Website
http://https://www.aptidco.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Civil Engineering Work;Lowering, Laying and Jointing of 110mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
267
-
13315.29
... More
Civil Engineering Work;Supply and run of 4 of 56/0.3mm (4.00Sq.mm) FR P.V.C. insulated flexible copper cableFRLS/FRLS H/HFFR/ ZHFR PVC insulated 1100V grade as per IS.694/1990 specification for Copper Cable of Category II of make V Guard/Bonton/Finecab/ HPL/ Million/Fortune Art / Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser/ Beljin/Rhino/ Standard / Vimal etc., including cost of cable, all materials and labour charges for fixing etc., complete as directed by the Department authorities.
50
-
10822.5
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.36
-
29732.86
... More
Civil Engineering Work;0.60 x 0.90 m Window Providing and Fixing of openable windows made of Pre painted steel (base steel as per IS 513 of 0.58mm thick Galvanized as per IS 277 with zinc of 120 GSM ) primer coated with epoxy primer of 5 7 microns thick. finish painted with a polyester paint of 12 16 microns thick and back coated with 5 7 microns thick alkyd backer and section for outer frame of 48 x 50mm, centre mullion of 48 x 50 mm section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stairless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, including 10mm square guard bars with 6 Inch (152.4mm) pitch etc., complete for finished item of work. (Single shutter window 2'0 Inch x 4'0 Inch (609.6mm x 1219.2mm). Outer frame section size of 48 x 50mm shutter frame section size of 48 x 25mm and as directed by the Departmental Authorities
1
-
3522.84
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
2
-
5662.58
... More
Civil Engineering Work;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub base/base course on a well prepared sub base and compacting with Vibratory Roller 80 100 kN weight to achieve the desired density including Cost and conveyance of all materials, all hire and operational charges of T and P etc., lighting, barricading and maintenance of diversion, etc as per Tables 400.11 and 400.12 and Technical Specification Clause 406 MORD / MORTH. as directed by the Departmental Authorities.
177.25
-
451133.16
... More
Civil Engineering Work;RCC M 20 Design mix (Cement fine aggregate coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing,centering and shuttering etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and as directed by the Departmental authorities for precast slab for drain.
27.43
-
182124.5
... More
Civil Engineering Work;Bore wells Cost and supply of 180 mm dia.cap.
3
-
945
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 150mm Dia. Sluice Valve. as directed by the Departmental Authorities.
10
-
5080.2
... More
Civil Engineering Work;Supplying and fixing of CP Long body bib cock fancy type deluxe heavy duty 12.70mm Dia. Indian make heavy duty of approved make including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work.
3
-
1953
... More
Civil Engineering Work;Bore wells Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 8.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
183
-
25989.66
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 100mm Dia. Sluice Valve. as directed by the Departmental Authorities.
2
-
670.02
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, correction charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for roof SLAB.
81.19
-
820223.6
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 100mm Dia. Scour Valve. as directed by the Departmental Authorities.
2
-
670.02
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
4.24
-
17390.11
... More
Civil Engineering Work;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
59.31
-
15528.54
... More
Civil Engineering Work;Lowering, Laying and Jointing of 200mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
125.5
-
14054.75
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.3
-
23966.18
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
4.05
-
3818.54
... More
Civil Engineering Work;Painting to kerb with approved Synthetic enamel paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost and conveyance of all materials, labour charges etc; complete for finished item of work (APSS No. 912)and as directed by the Department authorities
3931.2
-
1219772.74
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (250 I.D)
200.01
-
187473.37
... More
Civil Engineering Work;Construction of 904m (3' 0 Inch) Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1 3)Prop., 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
11
-
117415.43
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, correction charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for roof SLAB.
56.13
-
565016.37
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
17.33
-
2074.05
... More
Civil Engineering Work;Construction of un reinforced, design mix M 30 grade cement concrete pavement,over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixer laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T and P etc., curing of concrete slabs for 14 days as per Design and drawing and Technical Specification Clause 1501 MORD.(As per APDSS and as directed by the Departmental Authorities) for Block Approaches.
75.6
-
470269.8
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 63mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
3
-
228.36
... More
Civil Engineering Work;Supply and erecting 3 Phase, 10.00 HP ISI make submersible pumpset confirming to IS 14220 1994 of Makes Kirloskar / Crompton / Texmo / CRI / KSB/Lubi /PSG/ AryenVarshaof suitable for erection in open well with water resistant dynamically balanced impeller with stainless steel shaft sleeves, pump coupling and pivot with squirrel cage Induction Motor of 3 phase, 415V, 50Hz.., A.C.Supply, heavy copper windings with water proof insulation and high precision strength not to be effected by chemicals in water with suitable bronze bearings, 10 HP pump erected with necessary H type clamps of suitable size and strength including cost of all materials, Transportation and labour charges etc., complete and as directed by the Departmental authorities
2
-
96123.98
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 200mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
1
-
639.65
... More
Civil Engineering Work;Lowering and keeping in position of 100 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
224.12
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
14.18
-
1697.06
... More
Civil Engineering Work;Labour charges for Lowering and keeping in position of 200 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work.excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
626.69
... More
Civil Engineering Work;Bore wells Cost and supply of 175 mm dia. PVC blue threaded casing pipe(CM) including transportation to the work site.
305
-
352275
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for WALLS.
189.61
-
2520207
... More
Civil Engineering Work;Filling with Local available Earth with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering including cost and conveyance all materials and water to work site and all operational charges, incidental charges and all labour charges, hire charges, complete for finished item of work and as directed by the departmental authorities.
1833.84
-
418023.83
... More
Civil Engineering Work;Construction of 904.0 m (3' 0 Inch)Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1 3)Prop. 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
6
-
40696.92
... More
Civil Engineering Work;Lowering and keeping in position of 150 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
3
-
1139.61
... More
Civil Engineering Work;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Culvert slab.
9.07
-
59017.49
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Drains walls.
176.83
-
1435191.18
... More
Civil Engineering Work;Supply and delivery of Bolts and Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values as directed by departmental authorities.
10
-
1261.1
... More
Civil Engineering Work;Construction of 3' 0 Inch Dia. (upto a depth of 0.90 Mts.) Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1 3)Prop., 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 0.90 mts. (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification. (For Valve Chambers) as directed by the Departmental Authorities.
2
-
13565.64
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
171.72
-
187451.27
... More
Civil Engineering Work;Construction of un reinforced, design mix M 30 grade cement concrete pavement, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixer laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T and P etc., curing of concrete slabs for 14 days as per Design and drawing and Technical Specification Clause 1501 MORD.(As per APDSS and as directed by the Departmental Authorities) for Block Approaches.
316.8
-
1968645.89
... More
Civil Engineering Work;Bore wells Supply and erecting, ISI mark submersible 5 HP, 3 Phase, 8 stages pumpset suitable for 156mm dia borewell with high quality wear resistance and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of 3 phase 415V, 50Hz.. A.C. power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc., with necessary H type clamp of suitable size and strength.
3
-
139755.3
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
200.8
-
226084.74
... More
Civil Engineering Work;Manufacture,supply and delivery of unplasticised 160mm dia PVC pipes for potable water supplies conforming to IS 4985/2000 include of transportation to the sub divisional stores anywhere in AP exculding excise duty and sales tax etc., (4kg/cm2)
82.25
-
44668.33
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for Chajja's.
0.48
-
6347.2
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE TEEs conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading,forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
6541.96
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, correction charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR BOTTOM SLAB.
17.83
-
127963.06
... More
Civil Engineering Work;Providing and laying semi dense bituminous concrete with 40 60 TPH batch type HMP producing an average output of 37.5 tonnes per hour using crushed aggregates of grading I, premixed with bituminous binder V.G 30 (60/70) @ 4.5 Percentage of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects as directed by the Department authorities.
102.3
-
836511.19
... More
Civil Engineering Work;Supply and Erection of PANEL MOUNTING 125 A, 4 Pole, 25 KA, MCCB adjustable of make L and T/Schneider/Siemens/Legrand/Hager confirms to IS/IEC 60847 2 having breaking capacity 35/36 KA with Thermal Magnetic setting/ Microprocessor based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental Authorities.
2
-
24768.62
... More
Civil Engineering Work;Construction of granular sub base by providing well graded material for grading III spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.(CBR Value Minimum 30) including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as directed by the Departmental Authorities
334.82
-
560344.71
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Culvert walls.
10.8
-
86729.72
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 160mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
6
-
2290.5
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR SIDE WALLS.
13.2
-
220210.45
... More
Civil Engineering Work;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
1.52
-
113995.84
... More
Civil Engineering Work;Supplying and fixing of RCC Cover of 22 Inch Dia. of 3 Inch thick with nominal reinforcement as directed by the department and hooks for lifting including cost and conveyance of all materials to work site and operational, incidental and all labour charges for fixing charges etc., complete for finished item of work.
1
-
753.27
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
6.04
-
498851.39
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities for Side Berms
417.71
-
238992.78
... More
Civil Engineering Work;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub base/base course on a well prepared sub base and compacting with Vibratory Roller 80 100 kN weight to achieve the desired density including Cost and conveyance of all materials, all hire and operational charges of T and P etc., lighting, barricading and maintenance of diversion, etc as per Tables 400.11 and 400.12 and Technical Specification Clause 406 MORD / MORTH. as directed by the Departmental Authorities.
1315.17
-
3032203.35
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
150.92
-
86084.77
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 63mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
152.24
... More
Civil Engineering Work;Lowering, Laying and Jointing of 63mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
810
-
27013.5
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538Supply and delivery of .D.I. Double Flanged Sluice Valves of 200mm Dia.including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn 1.0 (MPa) as directed by the Departmental Authorities
2
-
57214.24
... More
Civil Engineering Work;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
54.75
-
12612.21
... More
Civil Engineering Work;Supply and delivery of D.I. Double Flanged swing check type (Reflux Valves) Non Return Valves of 100 mm Dia. conforming to IS 5312 (Pts.1 and 2 with amendments upto date, if any) having body, cover, door, bearing holder with D.I., Hinge pipe, Door pin, door suspension pin with stainless steel (IS.6603), body seat ring, door face ring, bearing bushes, plugs for hinge pin with leaded tin bronze (IS.318), bolts, nuts with carbon steel, gaskets with rubber, hinges with cast steel inlcuding cost and conveyance of all materials to work site and loading, unloading, transportation etc., complete as directed by the Departmental Authorities.
1
-
18109.09
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
547.87
-
65569.08
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
12.83
-
14005.36
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (150 I.D)
470
-
170877.9
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
10.8
-
9011.63
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 200mm Dia. Sluice Valve as directed by the Departmental Authorities.
4
-
2196.48
... More
Civil Engineering Work;Filling with Stone Crusher Dust for filling Plot Area and to fill the ditch portions wherever necessary in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental and all labour charges etc., complete for finished item of work as directed by the departmental authorities.
635.63
-
660934.43
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc.,complete as directed by the Departmental Authorities.
3
-
1506.54
... More
Civil Engineering Work;Manufacture,supply and delivery of unplasticised 160mm dia PVC pipes for potable water supplies conforming to IS 4985/2000 include of transportation to the sub divisional stores anywhere in AP exculding excise duty and sales tax etc., (4kg/cm2)
190.75
-
103592.51
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
175.76
-
146655.9
... More
Civil Engineering Work;Supply and delivery of Rubber Packing 6mm thick including cost and conveyance of all materials to site of work etc., complete as directed by the Departmental Authorities.
9.9
-
1046.03
... More
Civil Engineering Work;Supply and delivery of Bolts and Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values as directed by departmental authorities.
3
-
378.33
... More
Civil Engineering Work;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Culvert slab.
12.1
-
79837.74
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR TOP DOME SLAB.
3.14
-
49874.16
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
1700.35
-
203497.89
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 150mm Dia. , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn 1.0 (MPa) as directed by the Departmental Authorities
4
-
88183.4
... More
Civil Engineering Work;Supply and delivery of Centrifugally cast (spun) Ductile Iron 200 mm dia D/F 90 deg Duck foot bends confirming to IS 9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000 (ex words) including cost and conveyance of all materials to work site and inlcuding loading, unloading and all other connected taxes etc., complete for finished item of work (Weight = 45.00 Kgs) as directed by the Departmental Authorities.
4
-
14004.28
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300 2 of MoRT and H, including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities for side berms.
1495.61
-
1138936.93
... More
Civil Engineering Work;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
0.72
-
53998.03
... More
Civil Engineering Work;Bore wells Supply and Erection of PANEL MOUNTING 125 A, 4 Pole, 25 KA, MCCB adjustable of make L and T/Schneider/Siemens/Legrand/Hager confirms to IS/IEC 60847 2 having breaking capacity 35/36 KA with Thermal Magnetic setting/ Microprocessor based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the department.
3
-
37152.93
... More
Civil Engineering Work;Bore wells Supply and run of 4 of 56/0.3mm (4.00Sq.mm) FR P.V.C. insulated flexible copper cableFRLS/FRLS H/HFFR/ ZHFR PVC insulated 1100V grade as per IS.694/1990 specification for Copper Cable of Category II of make V Guard/Bonton /Finecab/ HPL /Million/Fortune Art / Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser/Beljin /Rhino/ Standard / Vimal etc., including cost of cable, all materials and labour charges for fixing etc., complete as directed by the Department authorities.
585
-
126623.25
... More
Civil Engineering Work;Supplying and fixing of 100mm Dia. B class G.I. Pipe properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for connecting Motor at Sump to Panel Board and as directed by the Departmental authorities
30
-
25972.5
... More
Civil Engineering Work;Bore wells Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 350/450 mm hole (for insertion of 160/175/200mm PVC Pipe/175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burled channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebuIlled pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, damps etc.,as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per 1SI specification used for rotary tube well. The pebbled gravel acking should be carried out in such a way that the theoretical quantity consumed completely. The entire work to be carried out as per I.S. 2800 Part I and II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc.,
183
-
248880
... More
Civil Engineering Work;Lowering and keeping in position of 100 mm Dia. Scour valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
224.12
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities Cost of DWC Pipe (200 I.D)
459.65
-
276258.84
... More
Civil Engineering Work;Labour charges for jointing 200mm Dia. Scour Valve with flanged ends including cost of joining material such as bolts and nuts rubber insertion, white lead including filling with water with lead up to 500 meters and testing to required presure complete(Reference to specifications BIS No.3114/94). as directed by departmental authorities
2
-
1054.14
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
12.54
-
7066.67
... More
Civil Engineering Work;Supply ,delivery and fixing of 50 mm dia Gunmetal gate valve (GM Peet) as per IS 778 Class I Indian make heavy type including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities as directed by the Departmental Authorities.
47
-
176537.17
... More
Civil Engineering Work;Supply and fixing to Cement JALLIES 40mm thick including cost and conveyance of all materials and water to work site and all operational, incidental charges, fixing, laying and all labour charges, curing etc., complete for finished item of work as directed by the departmental authorities
0.35
-
102.2
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538Supply and delivery of .D.I. Double Flanged Sluice Valves of 200mm Dia.including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn 1.0 (MPa) as directed by the Departmental Authorities
1
-
28607.12
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC COLUMNS.
0.92
-
12177.31
... More
Civil Engineering Work;Supply and erecting 3 Phase, 10.00 HP ISI make submersible pumpset confirming to IS 14220 1994 of Makes Kirloskar/Crompton/Texmo/CRI/KSB/Lubi /PSG/ AryenVarshaof suitable for erection in open well with water resistant dynamically balanced impeller with stainless steel shaft sleeves, pump coupling and pivot with squirrel cage Induction Motor of 3 phase, 415V, 50Hz.., A.C.Supply, heavy copper windings with water proof insulation and high precision strength not to be effected by chemicals in water with suitable bronze bearings, 10 HP pump erected with necessary H type clamps of suitable size and strength including cost of all materials, Transportation and labour charges etc., complete and as directed by the Departmental authorities
2
-
94831.04
... More
Civil Engineering Work;RO Plant Supply, Delivery, Erection and Commissioning of RO based Drinking water plant 500LPH. which consist of the followings 1. RAW WATER TRANSFER PUMP Quantity required One No. Material of construction CI. Capacity 1.5 m3/hr at 2.5kg/cm2, head 25 m. Make of material Kirloskar/ CRI/Eqvt. 2. MULTI GRADE FILTER Numbers required One No. Normal operating flow rate 1.0m3/hr Size of unit Dia × Ht. mm 12?×48? ,Material of construction FRP,Normal operating pressure 3.0kg /cm2,Tested Pressure 11.0 kg/cm2,Max. pressure drop 0.5kg/cm2 ,Flow control Top mounted multi port valve ,Media Graded silex and sand,Make Waterlife/Pentair ,3. ACTIVATED CARBON FILTER Numbers required One No. Normal operating flow rate 1.0m3/hr ,Size of unit dia × Ht. mm 12×48 ,Material of construction FRP ,Normal operating pressure 2.5 kg/cm2,Max. Pressure Drop 0.5 kg/cm2 Flow control Top mounted multi port valve ,Media Activated Carbon ,Activated Carbon Make VBD/Eqvt. Make Waterlife/Pentair,4. ANTISCALANT DOSING SYSTEM No. required One No. ,Type Diaphragm type electronic pump Capacity 0 5 LPH Make E dose / HITECH 5.MICRON FILTER Quantity required Two No. Type Disposable cartridge Operating flow rate 1.0 m3/hr ,Operating pressure 2.5 kg/cm2,Micron rating 5 micron ,Type of cartridge PP Wound ,MoC Polycarbonate. 6. HIGH PRESSURE PUMP Quantity required One No. Operating flow rate 1.5 m3/hr ,Operating pressure 12 14 kg/cm 2 ,Make of pump Sumo/CRI/Eqvt. Type of drive Single phase, 230 V, 50 Hz 2900 rpm. 7. RO MENBRANE HOUSING Quantity required TWO No. Material of pressure tube FRP 4040 Element capacity 02 No. Max. working pressure 300 psi Make Waterlife 8. RO MENBRANE Quantity required Two No. Dimensions Dia 4?, Length?40? ,Working pressure 180 psi Element Spiral wound Membrane. Make /HITECH /Eqvt. Pore size of semi permeable membrane 0.0001 micron diameters. 9. ELECTRICAL CONTROL PANEL ,Quantity required One no. Material of construction SS with powder coating, skid mount. Electrical components make L and T/Siemens/Havell?s. 10.U.V System.11.Ozen nessed.Instruments 1.pressure gauges(0.7kg/cm2) 02 nos 100mm dia,L/AEqvt (0 15kg/cm2) 02 Nos. 65mm dia, L/AEqvt.2. Flow meters 02 Nos. (One reject and One Permeate) 3.Pressure limiting Switches 02 Nos. line mounted adjustable. 4. Conductivity meter panel mounted online, Digital.
1
-
125000
... More
Civil Engineering Work;VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm and 12.50mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales and other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workt.,for SLABS.
138.21
-
983205.21
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
119.48
-
59996.88
... More
Civil Engineering Work;RCC M 20 Design mix (Cement fine aggregate coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing,centering and shuttering etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and as directed by the Departmental authorities for Pre cast Slab of Drains
207.12
-
1275610.66
... More
Civil Engineering Work;Bore wells Supply and erecting, ISI mark submersible 5 HP, 3 Phase, 8 stages pumpset suitable for 156mm dia borewell with high quality wear resistance and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of 3 phase 415V, 50Hz.. A.C. power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc., with necessary H type clamp of suitable size and strength.
3
-
139755.3
... More
Civil Engineering Work;Supply and delivery of InchResilient Seated Soft Sealing Inch 200 mm dia Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or Equivalent as per IS1865, IS 3896 2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100 Percentage leak proof with face to face dimensions as BS 5163 Type A/IS 14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN 3202F4/BS 5163 Type A Flange drilling as per IS 1538 excluding all taxes, duties and transportation. (PN 1.6Mpa) as directed by the Departmental Authorities.
1
-
28607.12
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300 2 of MoRT and H, including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities
211.62
-
167856.98
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Culvert bed.
4.05
-
21684.39
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (250mm I.D)
225.2
-
37610.65
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Culvert bed.
7.2
-
39304.58
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
57.46
-
243213.24
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm x 200mm Dia. HDPE Reducers conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
4
-
6094.32
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
1
-
2831.29
... More
Civil Engineering Work;Construction of un reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T and P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days as per design and drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities.
606.09
-
3934318.08
... More
Civil Engineering Work;Brick Masonry in C.M.(1 6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
7.4
-
46099.11
... More
Civil Engineering Work;Plastering 12 mm thick Single coat with C.M. (1 4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete for finished item work as directed by the Departmental Authorities.
15.4
-
5253.09
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300 2 of MoRT and H, including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities
470.7
-
378748.76
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 100mm Dia. Scour Valve. as directed by the Departmental Authorities.
2
-
632.66
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
19.09
-
16816
... More
Civil Engineering Work;Providing Independent Earthing from Main switch Board for earth continuity with No.8, G.I wire including excavation of earth in all soils upto 5' 6'' depth below ground level of section 5'x2'x3' duly providing 40mm Dia G.I Pipe of 2mts, length using GI bolts and nuts and fixing earth wire including supply and fixing 1' 6'' dia 0' 8'' depth hume pipe ring and refilling the pit with 40 Kgs hard coke, 20Kgs salt and excavated earth including all labour charges etc., complete for finished item of work and as directed by the Departmental authorities
1
-
4422.29
... More
Civil Engineering Work;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities for pipeline bed.
8.19
-
7674.36
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
238
-
82474.14
... More
Civil Engineering Work;Bore wells Geological Survey charges excluding taxes for Plain Area
3
-
3900
... More
Civil Engineering Work;Bore wells Supply and erecting, ISI mark submersible 5 HP, 3 Phase, 8 stages pumpset suitable for 156mm dia borewell with high quality wear resistance and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of 3 phase 415V, 50Hz.. A.C. power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc., with necessary H type clamp of suitable size and strength.
5
-
232925.5
... More
Civil Engineering Work;Bore wells Supply and run of 4 of 56/0.3mm (4.00Sq.mm) FR P.V.C. insulated flexible copper cableFRLS/FRLS H/HFFR/ ZHFR PVC insulated 1100V grade as per IS.694/1990 specification for Copper Cable of Category II of make V Guard/Bonton /Finecab/ HPL / Million /Fortune Art / Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser/Beljin/ Rhino/ Standard / Vimal etc., including cost of cable, all materials and labour charges for fixing etc., complete as directed by the Department authorities.
585
-
126623.25
... More
Civil Engineering Work;Bore wells 180mm dia. Pvc Casing pipe perforation charge
183
-
62586
... More
Civil Engineering Work;Construction of un reinforced, design mix M 30 grade cement concrete pavement, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixer laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T and P etc., curing of concrete slabs for 14 days as per Design and drawing and Technical Specification Clause 1501 MORD.(As per APDSS and as directed by the Departmental Authorities) for Block Approaches.
107.4
-
672922.22
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 200mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
4
-
2785.84
... More
Civil Engineering Work;Brick Masonry in C.M.(1 6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
1.35
-
9035.7
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 100mm Dia. Sluice Valve. as directed by the Departmental Authorities.
1
-
335.01
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 160mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
6
-
2290.5
... More
Civil Engineering Work;Lowering and keeping in position of 200 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work as directed by the Departmental Authorities.
1
-
537.16
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
13.73
-
60647.47
... More
Civil Engineering Work;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
64.61
-
14883.56
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm x 200mm Dia. HDPE Reducers conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
3
-
4570.74
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC COLUMNS.
0.92
-
12245.71
... More
Civil Engineering Work;Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI marked conforming to IS 1729 1979 of reputed make with cement caulked joints and fixing as per site requirements including painting black with Japan paint and fixing with necessary wooden blocks fixed in the masonry walls in cement mortar (1½ 1) and including fixing of M.S. clamps if necessary with required no. of Bombay nails etc., complete complete for Vent Pipe.as directed by the Departmental authorities
12
-
12570.36
... More
Civil Engineering Work;Lowering, Laying and Jointing of 160mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
3674.77
-
276379.45
... More
Civil Engineering Work;Supply and delivery of Bolts and Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values as directed by departmental authorities.
18
-
2269.98
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
92.98
-
70381.21
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
3009.6
-
360188.93
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC FOOTINGS.
0.49
-
4776.88
... More
Civil Engineering Work;Filling with Stone Crusher Dust for filling Plot Area and to fill the ditch portions wherever necessary in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental and all labour charges etc., complete for finished item of work as directed by the departmental authorities.
395.33
-
346376.29
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (150 I.D)
540
-
196327.8
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
39.6
-
3270615.08
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 110mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
390.84
... More
Civil Engineering Work;Providing and fixing double acting 50mm Air valve including boring the main, threading the bore and fixing the nipple ect., excluding cost rubber insertion bolts and nuts air valve and flanged tail piecee etc., complete.as directed by the departmental authorities
1
-
423.84
... More
Civil Engineering Work;Manufacture,supply and delivery of unplasticised 160mm dia PVC pipes for potable water supplies conforming to IS 4985/2000 include of transportation to the sub divisional stores anywhere in AP exculding excise duty and sales tax etc., (4kg/cm2)
70
-
38015.6
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 160mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
4
-
1527
... More
Civil Engineering Work;Construction of 904.0 m (3' 0 Inch)Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1 3)Prop. 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.(FOR Valve Pits) as directed by the Departmental Authorities.
9
-
61045.38
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
25.2
-
3015.94
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
149.63
-
124852.77
... More
Civil Engineering Work;Filling with Local available Earth with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering including cost and conveyance all materials and water to work site and all operational charges, incidental charges and all labour charges, hire charges, complete for finished item of work and as directed by the departmental authorities.
5350.38
-
1219619.12
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC FOOTINGS.
0.49
-
4687.9
... More
Civil Engineering Work;Lowering, Laying and Jointing of 110mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
286.1
-
14267.81
... More
Civil Engineering Work;RO Plant Supplying and laying of CPVC PIPES of 34.9mm OD Pipe SDR 11 and fittings or equal and for Hot and Cold confirming to IS.15778 2007 with malleable specials such as Tees, Elbows, Check nuts, unions, bushes etc., colvent cement including fixing in walls, ceiling floors including cost and conveyance of all materials to site of work and include for necessary excavation in all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making bores in walls ceiling etc., and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the department.
3
-
818.01
... More
Civil Engineering Work;Supplying and fixing 602 x 602 mm CI man hole frame and cover (light weight) 30 Kgs as directed by the Departmental authorities
8
-
25767.92
... More
Civil Engineering Work;Supply and delivery of Rubber Packing 6mm thick including cost and conveyance of all materials to site of work etc., complete as directed by the Departmental Authorities.
10
-
1056.6
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC COLUMNS.
0.92
-
12175.64
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (150 I.D)
130
-
47264.1
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
127.32
-
72516.38
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (150 I.D)
190
-
12304.4
... More
Civil Engineering Work;Supplying and fixing of 100mm Dia. B class G.I. Pipe properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for connecting Motor at Sump to Panel Board and as directed by the Departmental authorities
30
-
25972.5
... More
Civil Engineering Work;Bore wells Cost and supply of 175 mm dia. PVC blue threaded casing pipe(CM) including transportation to the work site.
183
-
211365
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
6.08
-
6203.42
... More
Civil Engineering Work;Supply and delivery of tamper proof D.I., Flanged Single Chamber Air Release Valves of 50mm Dia. with body and cover made of Ductile Iron Grade GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per IS 1865, IS 3896 2 with food grade epoxy powder coating (EP P) (Min 250 Micron) inside and outside of color blue RAL 5005. All internal parts such as float, shell, cove bolts etc., made of austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/ EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination flange drilling as per IS 1538 and including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities.
1
-
12860.08
... More
Civil Engineering Work;0.60 x 0.90 m Window Providing and Fixing of openable windows made of Pre painted steel (base steel as per IS 513 of 0.58mm thick Galvanized as per IS 277 with zinc of 120 GSM ) primer coated with epoxy primer of 5 7 microns thick. finish painted with a polyester paint of 12 16 microns thick and back coated with 5 7 microns thick alkyd backer and section for outer frame of 48 x 50mm, centre mullion of 48 x 50 mm section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stairless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, including 10mm square guard bars with 6 Inch (152.4mm) pitch etc., complete for finished item of work. (Single shutter window 2'0 Inch x 4'0 Inch (609.6mm x 1219.2mm). Outer frame section size of 48 x 50mm shutter frame section size of 48 x 25mm and as directed by the Departmental Authorities
1
-
3522.84
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 100mm Dia. (Scour Valve) , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete .(pn 1.0 (MPa) as directed by the Departmental Authorities
1
-
14172.34
... More
Civil Engineering Work;Supplying and fixing of 25mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete. for sump railings and inside and outside ladders and as directed by the Departmental authorities
105
-
32209.8
... More
Civil Engineering Work;Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M 10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 MORTH
598.8
-
191783.66
... More
Civil Engineering Work;Supply and fixing to Cement JALLIES 40mm thick including cost and conveyance of all materials and water to work site and all operational, incidental charges, fixing, laying and all labour charges, curing etc., complete for finished item of work as directed by the departmental authorities
0.35
-
102.2
... More
Civil Engineering Work;Construction of granular sub base by providing well graded material for grading III spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.(CBR Value Minimum 30) including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as directed by the Departmental Authorities
257.91
-
427581.25
... More
Civil Engineering Work;Supplying and fixing of CP Long body bib cock fancy type deluxe heavy duty 12.70mm Dia. Indian make heavy duty of approved make including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work.
3
-
1953.03
... More
Civil Engineering Work;Labour charges for Lowering and keeping in position of 200 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work.excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
2
-
1074.32
... More
Civil Engineering Work;Plastering 12 mm thick Single coat with C.M. (1 3) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete for finished item of work etc., complete. for Ceiling as directed by the Departmental Authorities.
7.5
-
2614.95
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
307
-
36741.76
... More
Civil Engineering Work;Supply and run of 4 of 56/0.3mm (4.00Sq.mm) FR P.V.C. insulated flexible copper cableFRLS/FRLS H/HFFR/ ZHFR PVC insulated 1100V grade as per IS.694/1990 specification for Copper Cable of Category II of make V Guard/Bonton /Finecab/ HPL / Million /Fortune Art / Sudhakar/Orbit/ Tamra/ Anchor/Plaza/Vihan/Ollvin/Laser/Beljin /Rhino/ Standard / Vimal etc., including cost of cable, all materials and labour charges for fixing etc., complete as directed by the Department authorities.
50
-
10822.5
... More
Civil Engineering Work;Lowering and keeping in position of 100 mm Dia. Scour valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
224.12
... More
Civil Engineering Work;Bore wells 180mm dia. Pvc Casing pipe perforation charge
305
-
104310
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
1725.28
-
982650.48
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities for Side Berms
1329.81
-
1040230.57
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities Cost of DWC Pipe (200 I.D)
558.6
-
335729.77
... More
Civil Engineering Work;Supplying and fixing of 8? SWG TEE junction of first class including cost and conveyance of all materials, air tight cement joints labour charges etc., complete.as directed by the Departmental authorities
8
-
4299.2
... More
Civil Engineering Work;Supply and delivery of D.I. Double Flanged swing check type (Reflux Valves) Non Return Valves of 100 mm Dia. conforming to IS 5312 (Pts.1 and 2 with amendments upto date, if any) having body, cover, door, bearing holder with D.I., Hinge pipe, Door pin, door suspension pin with stainless steel (IS.6603), body seat ring, door face ring, bearing bushes, plugs for hinge pin with leaded tin bronze (IS.318), bolts, nuts with carbon steel, gaskets with rubber, hinges with cast steel inlcuding cost and conveyance of all materials to work site and loading, unloading, transportation etc., complete as directed by the Departmental Authorities.
1
-
18109.09
... More
Civil Engineering Work;Plastering 12 mm thick Single coat with C.M. (1 4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete. for Ceiling as directed by the Departmental Authorities.
64.62
-
25353.01
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (250 I.D)
184.5
-
172935.54
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for WALLS.
194.68
-
2572766.28
... More
Civil Engineering Work;Construction of granular sub base by providing well graded material for grading III spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.(CBR Value Minimum 30) including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as directed by the Departmental Authorities
777.48
-
940828.55
... More
Civil Engineering Work;Bore wells Supply and Erection of PANEL MOUNTING 125 A, 4 Pole, 25 KA, MCCB adjustable of make L and T/Schneider/Siemens/Legrand/Hager confirms to IS/IEC 60847 2 having breaking capacity 35/36 KA with Thermal Magnetic setting/ Microprocessor based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the department.
3
-
37152.93
... More
Civil Engineering Work;Supplying and fixing of 25mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete. for sump railings and inside and outside ladders and as directed by the Departmental authorities
100
-
30676
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 150mm Dia. , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn 1.0 (MPa) as directed by the Departmental Authorities
3
-
66137.55
... More
Civil Engineering Work;Supply ,delivery and fixing of 50 mm dia Gunmetal gate valve (GM Peet) as per IS 778 Class I Indian make heavy type including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities
14
-
52585.54
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 160mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
720.32
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.73
-
60291.64
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (250 I.D)
130
-
21711.3
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 140mm x 160mm Dia. HDPE Reducers conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
4
-
3413
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
149.63
-
648423.1
... More
Civil Engineering Work;Supply and Erection of PANEL MOUNTING 125 A, 4 Pole, 25 KA, MCCB adjustable of make L and T/Schneider/Siemens/Legrand/Hager confirms to IS/IEC 60847 2 having breaking capacity 35/36 KA with Thermal Magnetic setting/ Microprocessor based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental Authorities.
2
-
24599.6
... More
Civil Engineering Work;Plastering 12 mm thick Single coat with C.M. (1 4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete. for Ceiling as directed by the Departmental Authorities.
64.62
-
25404.71
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authoritiesfor Culvert Bed
20.25
-
114069.26
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
1.15
-
91870.34
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
13.5
-
18033.3
... More
Civil Engineering Work;RO Plant Supplying and laying of CPVC PIPES of 34.9mm OD Pipe SDR 11 and fittings or equal and for Hot and Cold confirming to IS.15778 2007 with malleable specials such as Tees, Elbows, Check nuts, unions, bushes etc., colvent cement including fixing in walls, ceiling floors including cost and conveyance of all materials to site of work and include for necessary excavation in all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making bores in walls ceiling etc., and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the department.
3
-
818.01
... More
Civil Engineering Work;Supplying and fixing of approved make Automatic Star Delta Starter of make C and S/Crompton/L and T / Siemens/BCH suitable for 3 Phase, 415 V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete and as directed by the Departmental authorities
2
-
36862.38
... More
Civil Engineering Work;Lowering, Laying and Jointing of 63mm Dia. HDPE Pipes by butt fusion welding as per IS 7634/Part II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc.,complete for finished item of work as directed by the Departmental Authorities.
952.15
-
31754.2
... More
Civil Engineering Work;Construction of 904.0 m (3' 0 Inch)Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1 3)Prop. 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
8
-
54262.56
... More
Civil Engineering Work;Bore wells Cost and supply of 180 mm dia.cap.
3
-
945
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 160mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
6
-
2290.5
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 100mm Dia. Sluice Valve. as directed by the Departmental Authorities.
2
-
670.02
... More
Civil Engineering Work;Construction of un reinforced, design mix M 30 grade cement concrete pavement, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixer laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T and P etc., curing of concrete slabs for 14 days as per Design and drawing and Technical Specification Clause 1501 MORD.(As per APDSS and as directed by the Departmental Authorities) for Block Approaches.
94.9
-
572299.2
... More
Civil Engineering Work;Construction of granular sub base by providing well graded material for grading III spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.(CBR Value Minimum 30) including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as directed by the Departmental Authorities
331.42
-
507808.35
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 200mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
1
-
639.65
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (250 I.D)
313.5
-
52357.64
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
81.08
-
84810.49
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC PLINTH BEAMS.
0.63
-
7916.25
... More
Civil Engineering Work;Painting to New wood work with primer and two coats with Synthetic enamel paint in all shades of Grade I aprpoved brand and colour including cost and conveyance of all materials to work site and all operational, incidential and all labour charges such as sand paper, cleaning the surface, cost of brushes etc., complete for finished item of work as directed by the department (Three coats).
1.78
-
363.81
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (150 I.D)
252
-
16319.52
... More
Civil Engineering Work;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub base/base course on a well prepared sub base and compacting with Vibratory Roller 80 100 kN weight to achieve the desired density including Cost and conveyance of all materials, all hire and operational charges of T and P etc., lighting, barricading and maintenance of diversion, etc as per Tables 400.11 and 400.12 and Technical Specification Clause 406 MORD / MORTH. as directed by the Departmental Authorities.
674.85
-
1662958.62
... More
Civil Engineering Work;Bore wells Supply and Erection of PANEL MOUNTING 125 A, 4 Pole, 25 KA, MCCB adjustable of make L and T/Schneider/Siemens/Legrand/Hager confirms to IS/IEC 60847 2 having breaking capacity 35/36 KA with Thermal Magnetic setting/ Microprocessor based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the department.
5
-
61921.55
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for Chajja's.
0.48
-
6337.02
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
70.65
-
8182.68
... More
Civil Engineering Work;Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M 10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 MORTH
1396.04
-
441427.85
... More
Civil Engineering Work;Construction of 904m (3' 0 Inch) Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1 3)Prop., 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
31
-
330898.03
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR BOTTOM SLAB.
7.92
-
54080.77
... More
Civil Engineering Work;Supplying and fixing of 25mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete. for sump railings and inside and outside ladders and as directed by the Departmental authorities
105
-
32209.8
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
211.62
-
25326.68
... More
Civil Engineering Work;Supplying and fixing of approved make Automatic Star Delta Starter of make C and S/Crompton/L and T / Siemens/BCH suitable for 3 Phase, 415 V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete and as directed by the Departmental authorities
5
-
92155.95
... More
Civil Engineering Work;Supply and delivery of Rubber Packing 6mm thick including cost and conveyance of all materials to site of work etc., complete as directed by the Departmental Authorities.
7.2
-
760.75
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities for Side Berms
332.5
-
239197.18
... More
Civil Engineering Work;RO Plant Supply, Delivery, Erection and Commissioning of RO based Drinking water plant 500LPH. which consist of the followings 1. RAW WATER TRANSFER PUMP Quantity required One No. Material of construction CI. Capacity 1.5 m3/hr at 2.5kg/cm2, head 25 m. Make of material Kirloskar/ CRI/Eqvt. 2. MULTI GRADE FILTER Numbers required One No. Normal operating flow rate 1.0m3/hr Size of unit Dia × Ht. mm 12?×48? ,Material of construction FRP,Normal operating pressure 3.0kg /cm2,Tested Pressure 11.0 kg/cm2,Max. pressure drop 0.5kg/cm2 ,Flow control Top mounted multi port valve ,Media Graded silex and sand,Make Waterlife/Pentair ,3. ACTIVATED CARBON FILTER Numbers required One No. Normal operating flow rate 1.0m3/hr ,Size of unit dia × Ht. mm 12×48 ,Material of construction FRP ,Normal operating pressure 2.5 kg/cm2,Max. Pressure Drop 0.5 kg/cm2 Flow control Top mounted multi port valve ,Media Activated Carbon ,Activated Carbon Make VBD/Eqvt. Make Waterlife/Pentair,4. ANTISCALANT DOSING SYSTEM No. required One No. ,Type Diaphragm type electronic pump Capacity 0 5 LPH Make E dose / HITECH 5.MICRON FILTER Quantity required Two No. Type Disposable cartridge Operating flow rate 1.0 m3/hr ,Operating pressure 2.5 kg/cm2,Micron rating 5 micron ,Type of cartridge PP Wound ,MoC Polycarbonate. 6. HIGH PRESSURE PUMP Quantity required One No. Operating flow rate 1.5 m3/hr ,Operating pressure 12 14 kg/cm 2 ,Make of pump Sumo/CRI/Eqvt. Type of drive Single phase, 230 V, 50 Hz 2900 rpm. 7. RO MENBRANE HOUSING Quantity required TWO No. Material of pressure tube FRP 4040 Element capacity 02 No. Max. working pressure 300 psi Make Waterlife 8. RO MENBRANE Quantity required Two No. Dimensions Dia 4?, Length?40? ,Working pressure 180 psi Element Spiral wound Membrane. Make /HITECH /Eqvt. Pore size of semi permeable membrane 0.0001 micron diameters. 9. ELECTRICAL CONTROL PANEL ,Quantity required One no. Material of construction SS with powder coating, skid mount. Electrical components make L and T/Siemens/Havell?s. 10.U.V System.11.Ozen nessed.Instruments 1.pressure gauges(0.7kg/cm2) 02 nos 100mm dia,L/AEqvt (0 15kg/cm2) 02 Nos. 65mm dia, L/AEqvt.2. Flow meters 02 Nos. (One reject and One Permeate) 3.Pressure limiting Switches 02 Nos. line mounted adjustable. 4. Conductivity meter panel mounted online, Digital.
1
-
125000
... More
Civil Engineering Work;Bore wells Supply and run of 4 of 56/0.3mm (4.00Sq.mm) FR P.V.C. insulated flexible copper cableFRLS/FRLS H/HFFR/ ZHFR PVC insulated 1100V grade as per IS.694/1990 specification for Copper Cable of Category II of make V Guard/Bonton /Finecab/ HPL / Million /Fortune Art / Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser/Beljin/Rhino/ Standard / Vimal etc., including cost of cable, all materials and labour charges for fixing etc., complete as directed by the Department authorities.
585
-
126623.25
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for WALLS.
117.64
-
1559344.08
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
152.79
-
163746.57
... More
Civil Engineering Work;Construction of granular sub base by providing well graded material for grading III spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.(CBR Value Minimum 30) including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as directed by the Departmental Authorities
253.71
-
404677.6
... More
Civil Engineering Work;Supply ,delivery and fixing of 50 mm dia Gunmetal gate valve (GM Peet) as per IS 778 Class I Indian make heavy type including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities
13
-
48829.43
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
679.26
-
81293.84
... More
Civil Engineering Work;Painting to kerb with approved Synthetic enamel paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost and conveyance of all materials, labour charges etc; complete for finished item of work (APSS No. 912)and as directed by the Department authorities
480.79
-
149179.52
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
20.25
-
91143.02
... More
Civil Engineering Work;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities for pipeline bed.
660.52
-
551144.49
... More
Civil Engineering Work;Providing, Laying, Spreading and Compacting Graded Stone Aggregate to Wet Mix Macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site of work, laying in uniform layers in Sub Base/Base Course on a well prepared Sub Base and compacting with smooth wheel roller of 80 to 100 KN / Vibratory Roller 80 to 100 KN weight to achieve the desired density including lighting, barricading and maintenance of diversion etc., as per Tables.400.11 and 400.12 and technical specification Clause.406 MORD/MORTH as directed by the department and including cost and conveyance of all materials to site of work and all operational, incidental, seigniorage and all labour charges etc., complete for finished item of work
1344.68
-
2733210.01
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (200 I.D)
558.6
-
59658.48
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 160mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
763.5
... More
Civil Engineering Work;Supplying and fixing of RCC Cover of 22 Inch Dia. of 3 Inch thick with nominal reinforcement as directed by the department and hooks for lifting including cost and conveyance of all materials to work site and operational, incidental and all labour charges for fixing charges etc., complete for finished item of work.
2
-
1506.54
... More
Civil Engineering Work;Supplying and fixing of 100mm Dia. B class G.I. Pipe properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for connecting Motor at Sump to Panel Board and as directed by the Departmental authorities
30
-
25972.5
... More
Civil Engineering Work;Manufacture as per company?s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company?s standards, loading, transportation, unloading and stacking at site of work etc, complete but excluding taxes such as sales tax, C.E.D and others etc., as applicable.., complete for Septic Tank.as directed by the Departmental authorities
64
-
12070.4
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
255
-
28973.1
... More
Civil Engineering Work;Labour charges for Lowering and keeping in position of 200 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work.excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
626.69
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
1.35
-
111498.24
... More
Civil Engineering Work;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
64.62
-
16918.81
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR SIDE WALLS.
14.97
-
250864.57
... More
Civil Engineering Work;Plastering 20 mm thick Single coat with C.M. (1 4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete. for Internal and External Walls as directed by the Departmental Authorities.
64.61
-
30946.25
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR TOP RING BEAM.
3.03
-
37307.6
... More
Civil Engineering Work;Construction of granular sub base by providing well graded material for grading III spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.(CBR Value Minimum 30) including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as directed by the Departmental Authorities
470.1
-
749828.3
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Culvert Bed
9
-
46958.58
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the departmental authorities for Drain Walls.
70.88
-
552900.15
... More
Civil Engineering Work;Supplying and fixing of approved make Automatic Star Delta Starter of make C and S/Crompton/L and T / Siemens/BCH suitable for 3 Phase, 415 V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete and as directed by the Departmental authorities
2
-
36862.38
... More
Civil Engineering Work;Manufacture,supply and delivery of unplasticised 160mm dia PVC pipes for potable water supplies conforming to IS 4985/2000 include of transportation to the sub divisional stores anywhere in AP exculding excise duty and sales tax etc., (4kg/cm2)
24.5
-
13305.46
... More
Civil Engineering Work;RO Plant Supplying and laying of CPVC PIPES of 54.00mm OD Pipe SDR 11 and fittings or equal and for Hot and Cold confirming to IS.15778 2007 with malleable specials such as Tees, Elbows, Check nuts, unions, bushes etc., colvent cement including fixing in walls, ceiling floors including cost and conveyance of all materials to site of work and include for necessary excavation in all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making bores in walls ceiling etc., and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the department.
15
-
8623.35
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
11.16
-
48339.09
... More
Civil Engineering Work;Lowering, Laying and Jointing of 160mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
287.9
-
21652.96
... More
Civil Engineering Work;Providing and fixing double acting 50mm Air valve including boring the main, threading the bore and fixing the nipple ect., excluding cost rubber insertion bolts and nuts air valve and flanged tail piecee etc., complete.as directed by the departmental authorities
1
-
423.84
... More
Civil Engineering Work;Supplying and fixing of approved make Automatic Star Delta Starter of make C and S/Crompton/L and T / Siemens/BCH suitable for 3 Phase, 415 V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete and as directed by the Departmental authorities
2
-
36862.38
... More
Civil Engineering Work;Supplying and fixing of CP Long body bib cock fancy type deluxe heavy duty 12.70mm Dia. Indian make heavy duty of approved make including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work.
3
-
1953
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
220.1
-
247814.99
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
8.1
-
7135.13
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, correction charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for Raft.
176.26
-
1290295.47
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for Chajja's.
0.48
-
6249.85
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
2
-
5662.58
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR SIDE WALLS.
9.99
-
159061.08
... More
Civil Engineering Work;Supplying and fixing of approved make Automatic Star Delta Starter of make C and S/Crompton/L and T / Siemens/BCH suitable for 3 Phase, 415 V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete and as directed by the Departmental authorities
3
-
55293.57
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
1.15
-
5032.75
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (150 I.D)
140
-
50899.8
... More
Civil Engineering Work;DOOR of SIZE 0.90 x 2.00 m Providing and fixing Door Frames fabricated from sections made of galvanized Stell powder coated (base steel as per IS 513, galvanized as per IS 277 with zinc of 120 grams/square meter), the factory made section are powder coated with pure polyester powder of 50 60 microns thick with total coated thickness of 1.25mm, size of Door Frame section of 105x60mm with a rebate of 38mm to accommodate 35mm thick Door Shutter with groove to insert gasket in the frame section, frame sectiion filled with polyurethane foam, cut to length and joined by way of welding each frame provided with (a) 2mm thick MS powder coated butt hinges of 100mm long 3 Nos for Single Shutter, 6 Nos., for double shutter (b) CRCA electroplates stiffeners of 6 Nos 3 in each vertical (c) 40mm x 200mm x 1.20mm hold fasts screwd to stiffeners 6 Nos. with split end tail (d) Nylon Aldrops Receiver 1 No. for Single shutter frame (e) Tie Road 1 No. and supplying and fixing of Single Leaf Flush Door Shutter Solid bond Wood black Board type with Commercial ply on both faces of 30mm thick conforming to IS.2202 including cost of fixtures such as (i) 2 Nos. 250mm long M.S.powder coated Aldrops, (ii) 1 No. 250mm long 10mm Dia. M.S.Powder Coated Tower Bolt, (iii) 2 Nos. 125mm long M.S.powder coated Door Handles and (iv) 1 No. M.S.Powder coated Door Stopper and including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental authorities
1
-
7838.54
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, correction charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for Raft.
169.2
-
1242058.28
... More
Civil Engineering Work;Supplying and fixing of CP Long body bib cock fancy type deluxe heavy duty 12.70mm Dia. Indian make heavy duty of approved make including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work.
3
-
1953.03
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain bed.
58.06
-
316824.13
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
99.68
-
11929.7
... More
Civil Engineering Work;RCC M 20 Design mix (Cement fine aggregate coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing,centering and shuttering etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and as directed by the Departmental authorities for precast slab for drain.
68.13
-
449661.41
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Culvert walls.
12.6
-
102815.87
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
88.66
-
384027.24
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
87.09
-
89977.9
... More
Civil Engineering Work;Bore wells Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 350/450 mm hole (for insertion of 160/175/200mm PVC Pipe/175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burled channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebuIlled pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, damps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per 1SI specification used for rotary tube well. The pebbled gravel acking should be carried out in such a way that the theoretical quantity consumed completely. The entire work to be carried out as per I.S. 2800 Part I and II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc.,
305
-
414800
... More
Civil Engineering Work;Manufacture,supply and delivery of unplasticised 160mm dia PVC pipes for potable water supplies conforming to IS 4985/2000 include of transportation to the sub divisional stores anywhere in AP exculding excise duty and sales tax etc., (4kg/cm2)
35
-
19007.8
... More
Civil Engineering Work;Lowering, Laying and Jointing of 110mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
211.6
-
10552.49
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR SIDE WALLS.
16.1
-
268846.82
... More
Civil Engineering Work;Supply and delivery of Bolts and Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values as directed by departmental authorities.
14
-
1765.54
... More
Civil Engineering Work;Supply and delivery of Bolts and Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values as directed by departmental authorities.
10
-
1261.1
... More
Civil Engineering Work;Supplying and fixing of CP Long body bib cock fancy type deluxe heavy duty 12.70mm Dia. Indian make heavy duty of approved make including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work.
3
-
1953
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.97
-
80113.55
... More
Civil Engineering Work;Supply and fixing to Cement JALLIES 40mm thick including cost and conveyance of all materials and water to work site and all operational, incidental charges, mxing, laying and all labour charges, curing with neat finishing etc., complete for finished item of work as directed by the dept.
0.35
-
102.2
... More
Civil Engineering Work;Supply ,delivery and fixing of 50 mm dia Gunmetal gate valve (GM Peet) as per IS 778 Class I Indian make heavy type including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities
37
-
138976.07
... More
Civil Engineering Work;Lowering and keeping in position of 150 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
5
-
1628
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
42.36
-
3498567.04
... More
Civil Engineering Work;Manufacture as per company?s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company?s standards, loading, transportation, unloading and stacking at site of work etc, complete but excluding taxes such as sales tax, C.E.D and others etc., as applicable.., complete for Septic Tank.as directed by the Departmental authorities
64
-
12070.4
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 63mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
3
-
228.36
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
43.6
-
36380.28
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for ROOF BEAMS.
0.63
-
7587.86
... More
Civil Engineering Work;Supply and fixing to Cement JALLIES 40mm thick including cost and conveyance of all materials and water to work site and all operational, incidental charges, fixing, laying and all labour charges, curing etc., complete for finished item of work as directed by the departmental authorities
0.35
-
102.2
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
6.4
-
741.25
... More
Civil Engineering Work;Supplying and fixing of 25mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete. for sump railings and inside and outside ladders and as directed by the Departmental authorities
105
-
32209.8
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for ROOF BEAMS.
0.63
-
7635.85
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
14.4
-
1667.81
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (150 I.D)
130
-
8418.8
... More
Civil Engineering Work;Kandukuru External Water Supply ELSR 300KLConstuction of OHSR / ELSR of 300 KL capacity with staging of 22Mts. including fixtures and all the Concrete members shall be designed with M30 grade design mix with Raft Footings including 3 Coats of eppoxy paint food grade of best quality to inner surface of reservoir including roof and 2 Coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes, Bends,Valves etc., for pipe connections excluding cost of pipes Bends and Valves as per departmental designs and drawings but including cost and conveyance of all materials to work site and the above rate inclusive of following fixtures A. RCC or Aluminum ladder inside 0.60 m wide B. Doglegged stair case shall be provided with stair case flight with of 1.2m and landing width of 1.2m with SS railing upto 1m height C. Providing lightening arrester including conductor and earthing etc., complete 1No's D. RCC Ventilators with copper or Stainless steel fly proof Mesh E. DI Manhole frame and cover 0.6 X 0.6m as per IS specfications(Light duty) 2No's. F.Water level indicator of good quality with abonite/Copper float approved pattern 1.No's G. The Railing provided to gallery and staircase shall be with stainless steel of grade 304 for height of 1.2m H. The Dog Legged staircase shall be enclosed with Brick/CRS Wall on 3 sides and front side with MS collapsable gate upto 1st brace level from ground level. I.DI Swan neck ventilators in topdome and slab.
300000
-
8346000
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
26.93
-
2224183.44
... More
Civil Engineering Work;Bore wells Supply and erecting, ISI mark submersible 5 HP, 3 Phase, 8 stages pumpset suitable for 156mm dia borewell with high quality wear resistance and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of 3 phase 415V, 50Hz.. A.C. power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc., with necessary H type clamp of suitable size and strength.
3
-
139755.3
... More
Civil Engineering Work;Plastering 12 mm thick Single coat with C.M. (1 3) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete for finished item of work etc., complete. for Ceiling as directed by the Departmental Authorities.
7.5
-
2999.1
... More
Civil Engineering Work;Supplying and fixing of 100mm Dia. B class G.I. Pipe properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for connecting Motor at Sump to Panel Board and as directed by the Departmental authorities
30
-
25972.5
... More
Civil Engineering Work;Brick Masonry in C.M.(1 6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
7.4
-
49385.97
... More
Civil Engineering Work;Painting to New wood work with primer and two coats with Synthetic enamel paint in all shades of Grade I aprpoved brand and colour including cost and conveyance of all materials to work site and all operational, incidential and all labour charges such as sand paper, cleaning the surface, cost of brushes etc., complete for finished item of work as directed by the department (Three coats).
1.78
-
363.81
... More
Civil Engineering Work;Earthwork in excavation as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities for pipe line trench work
4184.06
-
500748.3
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
294.47
-
321446.4
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
486.83
-
58263.81
... More
Civil Engineering Work;Bore wells 180mm dia. Pvc Casing pipe perforation charge
183
-
62586
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Drains walls.
88.59
-
711424.65
... More
Civil Engineering Work;Supplying and fixing of 100mm Dia. B class G.I. Pipe properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for connecting Motor at Sump to Panel Board and as directed by the Departmental authorities
30
-
25972.5
... More
Civil Engineering Work;Brick Masonry in C.M.(1 6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
7.4
-
49628.1
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm x 200mm Dia. HDPE Reducers conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
3047.16
... More
Civil Engineering Work;Painting to New wood work with primer and two coats with Synthetic enamel paint in all shades of Grade I aprpoved brand and colour including cost and conveyance of all materials to work site and all operational, incidential and all labour charges such as sand paper, cleaning the surface, cost of brushes etc., complete for finished item of work as directed by the department (Three coats).
1.78
-
323.46
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
287.9
-
208361.87
... More
Civil Engineering Work;RO Plant Supplying and laying of CPVC PIPES of 34.9mm OD Pipe SDR 11 and fittings or equal and for Hot and Cold confirming to IS.15778 2007 with malleable specials such as Tees, Elbows, Check nuts, unions, bushes etc., colvent cement including fixing in walls, ceiling floors including cost and conveyance of all materials to site of work and include for necessary excavation in all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making bores in walls ceiling etc., and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the department.
3
-
818.01
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (200 I.D)
150.38
-
16060.58
... More
Civil Engineering Work;Lowering and keeping in position of 100 mm Dia. SCOUR VALVE including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work as directed by the Departmental Authorities.
2
-
384.22
... More
Civil Engineering Work;Brick Masonry in C.M.(1 6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
7.4
-
49598.5
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
674.32
-
78099.74
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities Cost of DWC Pipe (200 I.D)
95
-
57096.9
... More
Civil Engineering Work;Construction of 904.0 m (3' 0 Inch)Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1 3)Prop. 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.(FOR Valve Pits) as directed by the Departmental Authorities.
7
-
47479.74
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
952.15
-
108183.28
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
213.19
-
25514.58
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR BOTTOM SLAB.
7.92
-
53536.51
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 200mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
1392.92
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
18.9
-
2261.95
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR TOP DOME SLAB.
7.51
-
128308.58
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 110mm x 125mm Dia. HDPE Reducers conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
3
-
1322.49
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300 2 of MoRT and H, including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities for side berms.
2280.56
-
1571283.03
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for ROOF BEAMS.
0.63
-
7031.54
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
70.88
-
8209.32
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
12.54
-
6254.7
... More
Civil Engineering Work;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
64.62
-
16918.81
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
1511.42
-
180886.75
... More
Civil Engineering Work;Construction of granular sub base by providing well graded material for grading III spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.(CBR Value Minimum 30) including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as directed by the Departmental Authorities
1091.18
-
1320436.92
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
1434.45
-
166138
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for ROOF BEAMS.
0.63
-
7612.96
... More
Civil Engineering Work;RO Plant Supply, Delivery, Erection and Commissioning of RO based Drinking water plant 500LPH. which consist of the followings 1. RAW WATER TRANSFER PUMP Quantity required One No. Material of construction CI. Capacity 1.5 m3/hr at 2.5kg/cm2, head 25 m. Make of material Kirloskar/ CRI/Eqvt. 2. MULTI GRADE FILTER Numbers required One No. Normal operating flow rate 1.0m3/hr Size of unit Dia × Ht. mm 12?×48? ,Material of construction FRP,Normal operating pressure 3.0kg /cm2,Tested Pressure 11.0 kg/cm2,Max. pressure drop 0.5kg/cm2 ,Flow control Top mounted multi port valve ,Media Graded silex and sand,Make Waterlife/Pentair ,3. ACTIVATED CARBON FILTER Numbers required One No. Normal operating flow rate 1.0m3/hr ,Size of unit dia × Ht. mm 12×48 ,Material of construction FRP ,Normal operating pressure 2.5 kg/cm2,Max. Pressure Drop 0.5 kg/cm2 Flow control Top mounted multi port valve ,Media Activated Carbon ,Activated Carbon Make VBD/Eqvt. Make Waterlife/Pentair,4. ANTISCALANT DOSING SYSTEM No. required One No. ,Type Diaphragm type electronic pump Capacity 0 5 LPH Make E dose / HITECH 5.MICRON FILTER Quantity required Two No. Type Disposable cartridge Operating flow rate 1.0 m3/hr ,Operating pressure 2.5 kg/cm2,Micron rating 5 micron ,Type of cartridge PP Wound ,MoC Polycarbonate. 6. HIGH PRESSURE PUMP Quantity required One No. Operating flow rate 1.5 m3/hr ,Operating pressure 12 14 kg/cm 2 ,Make of pump Sumo/CRI/Eqvt. Type of drive Single phase, 230 V, 50 Hz 2900 rpm. 7. RO MENBRANE HOUSING Quantity required TWO No. Material of pressure tube FRP 4040 Element capacity 02 No. Max. working pressure 300 psi Make Waterlife 8. RO MENBRANE Quantity required Two No. Dimensions Dia 4?, Length?40? ,Working pressure 180 psi Element Spiral wound Membrane. Make /HITECH /Eqvt. Pore size of semi permeable membrane 0.0001 micron diameters. 9. ELECTRICAL CONTROL PANEL ,Quantity required One no. Material of construction SS with powder coating, skid mount. Electrical components make L and T/Siemens/Havell?s. 10.U.V System.11.Ozen nessed.Instruments 1.pressure gauges(0.7kg/cm2) 02 nos 100mm dia,L/AEqvt (0 15kg/cm2) 02 Nos. 65mm dia, L/AEqvt.2. Flow meters 02 Nos. (One reject and One Permeate) 3.Pressure limiting Switches 02 Nos. line mounted adjustable. 4. Conductivity meter panel mounted online, Digital.
1
-
125000
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR TOP RING BEAM.
1.24
-
14255.77
... More
Civil Engineering Work;Manufacture,supply and delivery of unplasticised 160mm dia PVC pipes for potable water supplies conforming to IS 4985/2000 include of transportation to the sub divisional stores anywhere in AP exculding excise duty and sales tax etc., (4kg/cm2)
134.75
-
73180.03
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
72.37
-
316712.83
... More
Civil Engineering Work;Providing and fixing double acting 50mm Air valve including boring the main, threading the bore and fixing the nipple ect., excluding cost rubber insertion bolts and nuts air valve and flanged tail piecee etc., complete.as directed by the departmental authorities
1
-
423.84
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc.,complete as directed by the Departmental Authorities.
2
-
1004.36
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300 2 of MoRT and H, including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities Side berms
2029.86
-
1348943.46
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc.,complete as directed by the Departmental Authorities.
3
-
1506.54
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for LINTELS.
0.07
-
839.77
... More
Civil Engineering Work;Construction of 904m (3' 0 Inch) Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1 3)Prop., 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
5
-
53370.65
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
2.56
-
204511.36
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (150 I.D)
170
-
11009.2
... More
Civil Engineering Work;Supply and delivery of Bolts and Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values as directed by departmental authorities.
24
-
3026.64
... More
Civil Engineering Work;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Culvert slab.
6.05
-
40509.35
... More
Civil Engineering Work;Lowering, Laying and Jointing of 160mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
530.53
-
39901.16
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities for Side Berms
1342.43
-
1017118.94
... More
Civil Engineering Work;Manufacture as per company?s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company?s standards, loading, transportation, unloading and stacking at site of work etc, complete but excluding taxes such as sales tax, C.E.D and others etc., as applicable.., complete for Septic Tank.as directed by the Departmental authorities
64
-
12070.4
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Drains walls.
94.58
-
750190.59
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 200mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
1392.92
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
2253.74
-
269727.6
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC COLUMNS.
0.92
-
11070.93
... More
Civil Engineering Work;RO Plant Supplying and laying of CPVC PIPES of 54.00mm OD Pipe SDR 11 and fittings or equal and for Hot and Cold confirming to IS.15778 2007 with malleable specials such as Tees, Elbows, Check nuts, unions, bushes etc., colvent cement including fixing in walls, ceiling floors including cost and conveyance of all materials to site of work and include for necessary excavation in all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making bores in walls ceiling etc., and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the department.
15
-
8623.35
... More
Civil Engineering Work;Supply and erecting 3 Phase, 10.00 HP ISI make submersible pumpset confirming to IS 14220 1994 of Makes Kirloskar/Crompton/Texmo/CRI/KSB/Lubi /PSG/ AryenVarshaof suitable for erection in open well with water resistant dynamically balanced impeller with stainless steel shaft sleeves, pump coupling and pivot with squirrel cage Induction Motor of 3 phase, 415V, 50Hz.., A.C.Supply, heavy copper windings with water proof insulation and high precision strength not to be effected by chemicals in water with suitable bronze bearings, 10 HP pump erected with necessary H type clamps of suitable size and strength including cost of all materials, Transportation and labour charges etc., complete and as directed by the Departmental authorities
2
-
96123.98
... More
Civil Engineering Work;Construction of un reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T and P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days as per design and drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities.
287.47
-
1884043.88
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 160mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
720.32
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR TOP RING BEAM.
1.24
-
14170.57
... More
Civil Engineering Work;Bore wells Supply and Erection of PANEL MOUNTING 125 A, 4 Pole, 25 KA, MCCB adjustable of make L and T/Schneider/Siemens/Legrand/Hager confirms to IS/IEC 60847 2 having breaking capacity 35/36 KA with Thermal Magnetic setting/ Microprocessor based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the department.
3
-
37152.93
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC PLINTH BEAMS.
0.63
-
7882.24
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 200mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
1
-
639.65
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for WALLS.
293.21
-
3875409.35
... More
Civil Engineering Work;Supply and delivery of tamper proof D.I., Flanged Single Chamber Air Release Valves of 50mm Dia. with body and cover made of Ductile Iron Grade GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per IS 1865, IS 3896 2 with food grade epoxy powder coating (EP P) (Min 250 Micron) inside and outside of color blue RAL 5005. All internal parts such as float, shell, cove bolts etc., made of austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/ EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination flange drilling as per IS 1538 and including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities.
1
-
12860.08
... More
Civil Engineering Work;Bore wells Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 350/450 mm hole (for insertion of 160/175/200mm PVC Pipe/175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burled channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebuIlled pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, damps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per 1SI specification used for rotary tube well. The pebbled gravel acking should be carried out in such a way that the theoretical quantity consumed completely. The entire work to be carried out as per I.S. 2800 Part I and II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc.,
183
-
248880
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
883.5
-
500264.21
... More
Civil Engineering Work;Supplying and fixing of 8? SWG TEE junction of first class including cost and conveyance of all materials, air tight cement joints labour charges etc., complete.as directed by the Departmental authorities
8
-
4299.2
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (150 I.D)
190
-
69078.3
... More
Civil Engineering Work;Supply and delivery of Bolts and Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values as directed by departmental authorities.
12
-
1513.32
... More
Civil Engineering Work;Supply and delivery of tamper proof D.I., Flanged Single Chamber Air Release Valves of 50mm Dia. with body and cover made of Ductile Iron Grade GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per IS 1865, IS 3896 2 with food grade epoxy powder coating (EP P) (Min 250 Micron) inside and outside of color blue RAL 5005. All internal parts such as float, shell, cove bolts etc., made of austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/ EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination flange drilling as per IS 1538 and including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities.
2
-
25720.16
... More
Civil Engineering Work;Providing and fixing double acting 50mm Air valve including boring the main, threading the bore and fixing the nipple ect., excluding cost rubber insertion bolts and nuts air valve and flanged tail piecee etc., complete.as directed by the departmental authorities
1
-
423.84
... More
Civil Engineering Work;Lowering and keeping in position of 150 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
3
-
1139.61
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 200mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
1392.92
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 63mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
3
-
228.36
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC PLINTH BEAMS.
0.63
-
7460.34
... More
Civil Engineering Work;Supply and run of 4 of 56/0.3mm (4.00Sq.mm) FR P.V.C. insulated flexible copper cableFRLS/FRLS H/HFFR/ ZHFR PVC insulated 1100V grade as per IS.694/1990 specification for Copper Cable of Category II of make V Guard/Bonton /Finecab/HPL /Million /Fortune Art / Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser/ Beljin/Rhino/ Standard/Vimal etc., including cost of cable, all materials and labour charges for fixing etc., complete as directed by the Department authorities.
50
-
10822.5
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
4.53
-
374138.54
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm x 200mm Dia. HDPE Reducers conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
3047.16
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for LINTELS.
0.07
-
924.15
... More
Civil Engineering Work;Supply and Erection of Panel Mounting 125 A, 4 Pole, 25 KA, MCCB with thermal magnetic setting/Microprocessor based release arrangement with all connections etc., and supply of 125A 4 pole MCCB adjustable confirms to IS/IEC 60947 2 having breaking capacity 25 KA with Thermal Magnetic setting based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the dept., of make L and T/Schneider/Siemens/Hager.
3
-
36899.4
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Culvert walls.
17.1
-
134710.55
... More
Civil Engineering Work;Filling with Stone Crusher Dust for filling Plot Area and to fill the ditch portions wherever necessary in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental and all labour charges etc., complete for finished item of work as directed by the departmental authorities.
2753.22
-
3563382.52
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
1.15
-
5130.05
... More
Civil Engineering Work;Bore wells Supply and run of 4 of 56/0.3mm (4.00Sq.mm) FR P.V.C. insulated flexible copper cableFRLS/FRLS H/HFFR/ ZHFR PVC insulated 1100V grade as per IS.694/1990 specification for Copper Cable of Category II of make V Guard/Bonton /Finecab/HPL/ Million /Fortune Art/Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser/Beljin /Rhino/ Standard / Vimal etc., including cost of cable, all materials and labour charges for fixing etc., complete as directed by the Department authorities. .
585
-
126623.25
... More
Civil Engineering Work;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities for pipeline bed.
576
-
628767.36
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
867.82
-
100510.91
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain bed.
47.91
-
264565.73
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Culvert walls.
8.1
-
65555.89
... More
Civil Engineering Work;Supply and fixing to Cement JALLIES 40mm thick including cost and conveyance of all materials and water to work site and all operational, incidental charges, fixing, laying and all labour charges, curing etc., complete for finished item of work as directed by the departmental authorities
0.35
-
102.2
... More
Civil Engineering Work;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
66.41
-
17387.47
... More
Civil Engineering Work;Labour charges for Lowering and keeping in position of 200 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work.excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
4
-
2148.64
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
19.09
-
17999.01
... More
Civil Engineering Work;Supplying and fixing of approved make Automatic Star Delta Starter of make C and S/Crompton/L and T / Siemens/BCH suitable for 3 Phase, 415 V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete and as directed by the Departmental authorities
2
-
36862.38
... More
Civil Engineering Work;Construction of 904m (3' 0 Inch) Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1 3)Prop., 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
12
-
128089.56
... More
Civil Engineering Work;Lowering, Laying and Jointing of 200mm Dia. HDPE Pipes by butt fusion welding as per IS 7634/Part II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc.,complete for finished item of work as directed by the Departmental Authorities.
259.05
-
26257.31
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
8.74
-
721847.87
... More
Civil Engineering Work;Plastering 12 mm thick Single coat with C.M. (1 3) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete for finished item of work etc., complete. for Ceiling as directed by the Departmental Authorities.
7.5
-
2968.35
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities Cost of DWC Pipe (200 I.D)
237.6
-
142802.35
... More
Civil Engineering Work;RO Plant Supplying and laying of CPVC PIPES of 34.9mm OD Pipe SDR 11 and fittings or equal and for Hot and Cold confirming to IS.15778 2007 with malleable specials such as Tees, Elbows, Check nuts, unions, bushes etc., colvent cement including fixing in walls, ceiling floors including cost and conveyance of all materials to site of work and include for necessary excavation in all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making bores in walls ceiling etc., and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the department.
3
-
818.01
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
1309.14
-
151624.59
... More
Civil Engineering Work;Lowering, Laying and Jointing of 200mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
380.5
-
38567.48
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 160mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
4
-
1440.64
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 100mm Dia. (Scour Valve) , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete .(pn 1.0 (MPa) as directed by the Departmental Authorities
1
-
14172.34
... More
Civil Engineering Work;Providing and fixing double acting 50mm Air valve including boring the main, threading the bore and fixing the nipple ect., excluding cost rubber insertion bolts and nuts air valve and flanged tail piecee etc., complete.as directed by the departmental authorities
4
-
1387.92
... More
Civil Engineering Work;Construction of un reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T and P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days as per design and drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities for Main Roads.
2377.64
-
15623781.53
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
5.65
-
6167.6
... More
Civil Engineering Work;RO Plant Supply, Delivery, Erection and Commissioning of RO based Drinking water plant 1000LPH. which consist of the followings 1. RAW WATER TRANSFER PUMP Quantity required One No. Material of construction CI. Capacity 1.5 m3/hr at 2.5kg/cm2, head 25 m. Make of material Kirloskar/ CRI/Eqvt. 2.Dual midia FILTER Numbers required One No. Normal operating flow rate 2.5m3/hr Size of unit Dia × Ht. mm 14?×65? ,Material of construction FRP,Normal operating pressure 3.0kg /cm2,Tested Pressure 11.0 kg/cm2,Max. pressure drop 0.5kg/cm2 ,Flow control Top mounted multi port valve ,Media Graded silex and sand and activated carbon,Make Waterlife/Pentair ,3. ANTISCALANT DOSING SYSTEM No. required One No. capacity of tank 100lts dosing pump one number ,Type Diaphragm type electronic pump, Capacity 0 5 LPH, Make E dose.4.MICRON FILTER Quantity required Two No. Type Disposable cartridge Operating flow rate 2.5 m3/hr ,Operating pressure 2.5 kg/cm2,Micron rating 5 micron ,Type of cartridge PP Wound ,MoC Polycarbonate. 5. HIGH PRESSURE PUMP Quantity required One No. Operating flow rate 2.5 m3/hr ,Operating pressure 12 14 kg/cm 2 ,Make of pump Sumo/CRI/Shakti . Type of drive three phase, 440 V, 50 Hz 2900 rpm. 6. RO MENBRANE HOUSING Quantity required TWO No. Material of pressure tube FRP 8040 Element capacity 01 No. Max. working pressure 300 psi Make Waterlife 7. RO MENBRANE Quantity required four No. Dimensions Dia 8?, Length?40? ,Working pressure 180 psi Element Spiral wound Membrane. Make Filmtech dow(USA) /Eqvt. Pore size of semi permeable membrane 0.0001 micron diameters. 8. ELECTRICAL CONTROL PANEL ,Quantity required One no. Material of construction SS powder coated box make L and T components, 9.U.V System. Instruments 1.pressure gauges(0.7kg/cm2) 02 nos 100mm dia,L/AEqvt (0 15kg/cm2) 02 Nos. 65mm dia, L/AEqvt.2. Flow meters 02 Nos. (One reject and One Permeate) 3.Pressure limiting Switches 02 Nos. line mounted adjustable.piping CPVC and UPVC.
1
-
168000
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
2.67
-
213298.96
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
2700.1
-
323147.97
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., Complete as directed by the Departmental Authorities
4
-
5826.16
... More
Civil Engineering Work;Plastering 12 mm thick Single coat with C.M. (1 4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete. for Ceiling as directed by the Departmental Authorities.
64.62
-
25274.82
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
330
-
37494.6
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for ROOF SLABS.
1.4
-
18309.05
... More
Civil Engineering Work;Painting to New wood work with primer and two coats with Synthetic enamel paint in all shades of Grade I aprpoved brand and colour including cost and conveyance of all materials to work site and all operational, incidential and all labour charges such as sand paper, cleaning the surface, cost of brushes etc., complete for finished item of work as directed by the department (Three coats).
1.78
-
363.81
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (200 I.D)
591.68
-
63191.42
... More
Civil Engineering Work;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
85.15
-
22293.97
... More
Civil Engineering Work;Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M 10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 MORTH
2317.3
-
721097.41
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR SIDE WALLS.
14.39
-
239489.17
... More
Civil Engineering Work;0.60 x 0.90 m Window Providing and Fixing of openable windows made of Pre painted steel (base steel as per IS 513 of 0.58mm thick Galvanized as per IS 277 with zinc of 120 GSM ) primer coated with epoxy primer of 5 7 microns thick. finish painted with a polyester paint of 12 16 microns thick and back coated with 5 7 microns thick alkyd backer and section for outer frame of 48 x 50mm, centre mullion of 48 x 50 mm section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stairless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, including 10mm square guard bars with 6 Inch (152.4mm) pitch etc., complete for finished item of work. (Single shutter window 2'0 Inch x 4'0 Inch (609.6mm x 1219.2mm). Outer frame section size of 48 x 50mm shutter frame section size of 48 x 25mm and as directed by the Departmental Authorities
1
-
3522.84
... More
Civil Engineering Work;Construction of 904m (3' 0 Inch) Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1 3)Prop., 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
12
-
128089.56
... More
Civil Engineering Work;Supply and delivery of InchResilient Seated Soft Sealing Inch 200 mm dia Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or Equivalent as per IS1865, IS 3896 2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100 Percentage leak proof with face to face dimensions as BS 5163 Type A/IS 14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN 3202F4/BS 5163 Type A Flange drilling as per IS 1538 excluding all taxes, duties and transportation. (PN 1.6Mpa) as directed by the Departmental Authorities.
1
-
28607.12
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR SIDE WALLS.
9.99
-
159747.49
... More
Civil Engineering Work;Filling with Local available Earth with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering including cost and conveyance all materials and water to work site and all operational charges, incidental charges and all labour charges, hire charges, complete for finished item of work and as directed by the departmental authorities.
2237.63
-
510067.76
... More
Civil Engineering Work;Filling with Local available Earth with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering including cost and conveyance all materials and water to work site and all operational charges, incidental charges and all labour charges, hire charges, complete for finished item of work and as directed by the departmental authorities.
9120.26
-
2078963.27
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 150mm Dia. , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn 1.0 (MPa) as directed by the Departmental Authorities
5
-
110229.25
... More
Civil Engineering Work;Construction of un reinforced, design mix M 30 grade cement concrete pavement, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixer laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T and P etc., curing of concrete slabs for 14 days as per Design and drawing and Technical Specification Clause 1501 MORD.(As per APDSS and as directed by the Departmental Authorities) for Block Approaches.
194.4
-
1143528.84
... More
Civil Engineering Work;Supply and delivery of D.I. D/F Specials as per specifications of IS No.,7181/1986, 5531/1988 and 3950/1979 inlcuding cost and conveyance loading unloading etc., complete as directed by the Departmental Authorities.
500
-
67330
... More
Civil Engineering Work;Supplying and fixing of approved make Automatic Star Delta Starter of make C and S/Crompton/L and T / Siemens/BCH suitable for 3 Phase, 415 V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete and as directed by the Departmental authorities
2
-
36595.4
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., Complete as directed by the Departmental Authorities
5
-
7282.7
... More
Civil Engineering Work;RO Plant Supplying and fixing of 32mm N.B. size Gunmetal Gate (G.M.Peet) Valve as per IS.778, Class I of Indian make heavy type including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work as directed by the department.
1
-
1898.51
... More
Civil Engineering Work;Lowering, Laying and Jointing of 160mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
877
-
60188.51
... More
Civil Engineering Work;DOOR of SIZE 0.90 x 2.00 m Providing and fixing Door Frames fabricated from sections made of galvanized Stell powder coated (base steel as per IS 513, galvanized as per IS 277 with zinc of 120 grams/square meter), the factory made section are powder coated with pure polyester powder of 50 60 microns thick with total coated thickness of 1.25mm, size of Door Frame section of 105x60mm with a rebate of 38mm to accommodate 35mm thick Door Shutter with groove to insert gasket in the frame section, frame sectiion filled with polyurethane foam, cut to length and joined by way of welding each frame provided with (a) 2mm thick MS powder coated butt hinges of 100mm long 3 Nos for Single Shutter, 6 Nos., for double shutter (b) CRCA electroplates stiffeners of 6 Nos 3 in each vertical (c) 40mm x 200mm x 1.20mm hold fasts screwd to stiffeners 6 Nos. with split end tail (d) Nylon Aldrops Receiver 1 No. for Single shutter frame (e) Tie Road 1 No. and supplying and fixing of Single Leaf Flush Door Shutter Solid bond Wood black Board type with Commercial ply on both faces of 30mm thick conforming to IS.2202 including cost of fixtures such as (i) 2 Nos. 250mm long M.S.powder coated Aldrops, (ii) 1 No. 250mm long 10mm Dia. M.S.Powder Coated Tower Bolt, (iii) 2 Nos. 125mm long M.S.powder coated Door Handles and (iv) 1 No. M.S.Powder coated Door Stopper and including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental authorities
1
-
7838.54
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (200 I.D)
459.65
-
49090.62
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
12.54
-
7100.52
... More
Civil Engineering Work;RO Plant Supplying and laying of CPVC PIPES of 54.00mm OD Pipe SDR 11 and fittings or equal and for Hot and Cold confirming to IS.15778 2007 with malleable specials such as Tees, Elbows, Check nuts, unions, bushes etc., colvent cement including fixing in walls, ceiling floors including cost and conveyance of all materials to site of work and include for necessary excavation in all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making bores in walls ceiling etc., and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the department.
15
-
8623.35
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
7.75
-
6466.68
... More
Civil Engineering Work;Supplying and fixing of 25mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete. for sump railings and inside and outside ladders and as directed by the Departmental authorities
105
-
32209.8
... More
Civil Engineering Work;Providing Independent Earthing from Main switch Board for earth continuity with No.8, G.I wire including excavation of earth in all soils upto 5' 6'' depth below ground level of section 5'x2'x3' duly providing 40mm Dia G.I Pipe of 2mts, length using GI bolts and nuts and fixing earth wire including supply and fixing 1' 6'' dia 0' 8'' depth hume pipe ring and refilling the pit with 40 Kgs hard coke, 20Kgs salt and excavated earth including all labour charges etc., complete for finished item of work and as directed by the Departmental authorities
1
-
4422.29
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC COLUMNS.
0.92
-
11007.72
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (150 I.D)
540
-
34970.4
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
5.4
-
23632.02
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
119.48
-
60633.71
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
956.16
-
538824.84
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300 2 of MoRT and H, including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities
371.8
-
225061.69
... More
Civil Engineering Work;Filling with Stone Crusher Dust for filling Plot Area and to fill the ditch portions wherever necessary in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental and all labour charges etc., complete for finished item of work as directed by the departmental authorities.
751.45
-
762736.78
... More
Civil Engineering Work;RCC M 20 Design mix (Cement fine aggregate coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing,centering and shuttering etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and as directed by the Departmental authorities for precast slab for drain.
239.1
-
1560863.93
... More
Civil Engineering Work;Manufacture, Supplying and delivery of HDPE (PE 100 Grade) OD 160 mm Dia. HDPE End caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site, loading,unloading charges and including all taxes etc., complete for finished item of work.as directed by the Departmental Authorities.
3
-
1080.48
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
72.76
-
315157.03
... More
Civil Engineering Work;Brick Masonry in C.M.(1 6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
1.35
-
9027
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 160mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
4
-
1440.64
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
727.45
-
84253.26
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC PLINTH BEAMS.
0.63
-
7929.63
... More
Civil Engineering Work;Labour charges for Lowering and keeping in position of 200 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work.excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
626.69
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE TEEs conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
21
-
36790.74
... More
Civil Engineering Work;Lowering and keeping in position of 100 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
224.12
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.3
-
24777.39
... More
Civil Engineering Work;Construction of 3' 0 Inch Dia. (upto a depth of 0.90 Mts.) Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1 3)Prop., 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 0.90 mts. (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification. (For Valve Chambers) as directed by the Departmental Authorities.
8
-
54262.56
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR BOTTOM SLAB.
17.83
-
130238.52
... More
Civil Engineering Work;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
64.62
-
14885.86
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
7.75
-
7307.09
... More
Civil Engineering Work;Manufacture as per company?s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company?s standards, loading, transportation, unloading and stacking at site of work etc, complete but excluding taxes such as sales tax, C.E.D and others etc., as applicable.., complete for Septic Tank.as directed by the Departmental authorities
64
-
12070.4
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
387.2
-
134176.42
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
27.81
-
2296863.77
... More
Civil Engineering Work;Bore wells Cost and supply of 175 mm dia. PVC blue threaded casing pipe(CM) including transportation to the work site.
91.5
-
105682.5
... More
Civil Engineering Work;Labour charges for Lowering and keeping in position of 200 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work.excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
2
-
1253.38
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC FOOTINGS.
0.49
-
4353.85
... More
Civil Engineering Work;Providing and fixing double acting 50mm Air valve including boring the main, threading the bore and fixing the nipple ect., excluding cost rubber insertion bolts and nuts air valve and flanged tail piecee etc., complete.as directed by the departmental authorities
1
-
423.84
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
6.4
-
765.95
... More
Civil Engineering Work;Bore wells Supply and erecting, ISI mark submersible 5 HP, 3 Phase, 8 stages pumpset suitable for 156mm dia borewell with high quality wear resistance and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of 3 phase 415V, 50Hz.. A.C. power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc., with necessary H type clamp of suitable size and strength.
3
-
139755.3
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
61.38
-
251746.39
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., Complete as directed by the Departmental Authorities
5
-
7282.7
... More
Civil Engineering Work;Construction of un reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T and P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days as per design and drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities.
286.33
-
1871278.22
... More
Civil Engineering Work;Filling with Local available Earth with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering including cost and conveyance all materials and water to work site and all operational charges, incidental charges and all labour charges, hire charges, complete for finished item of work and as directed by the departmental authorities.
1906.87
-
434671.02
... More
Civil Engineering Work;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Culvert slab.
11.09
-
74052.03
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR TOP RING BEAM.
2.37
-
29309.15
... More
Civil Engineering Work;Plastering 12 mm thick Single coat with C.M. (1 3) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete for finished item of work etc., complete. for Ceiling as directed by the Departmental Authorities.
7.5
-
3005.1
... More
Civil Engineering Work;Labour charges for Lowering and keeping in position of 200 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work.excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
2
-
1253.38
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
88.07
-
389018.4
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for Chajja's.
0.48
-
6318.76
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
4.53
-
374138.54
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
286.1
-
99142.23
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300 2 of MoRT and H, including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities
714.88
-
526137.38
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR SIDE WALLS.
20.61
-
343044.59
... More
Civil Engineering Work;Plastering 12 mm thick Single coat with C.M. (1 4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete. for Ceiling as directed by the Departmental Authorities.
64.62
-
25365.93
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
314.54
-
37644.15
... More
Civil Engineering Work;Supplying and fixing of RCC Cover of 22 Inch Dia. of 3 Inch thick with nominal reinforcement as directed by the department and hooks for lifting including cost and conveyance of all materials to work site and operational, incidental and all labour charges for fixing charges etc., complete for finished item of work.
2
-
1506.54
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (250 I.D)
243.71
-
40702.01
... More
Civil Engineering Work;Bore wells Cost and supply of 175 mm dia. PVC blue threaded casing pipe(CM) including transportation to the work site.
183
-
211365
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
169.14
-
20242.68
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE TEEs conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
14
-
24527.16
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for LINTELS.
0.07
-
925.63
... More
Civil Engineering Work;Lowering, Laying and Jointing of 110mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
355.7
-
17738.76
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (250 I.D)
356.6
-
334248.31
... More
Civil Engineering Work;RO Plant Supply, Delivery, Erection and Commissioning of RO based Drinking water plant 500LPH. which consist of the followings 1. RAW WATER TRANSFER PUMP Quantity required One No. Material of construction CI. Capacity 1.5 m3/hr at 2.5kg/cm2, head 25 m. Make of material Kirloskar/ CRI/Eqvt. 2. MULTI GRADE FILTER Numbers required One No. Normal operating flow rate 1.0m3/hr Size of unit Dia × Ht. mm 12?×48? ,Material of construction FRP,Normal operating pressure 3.0kg /cm2,Tested Pressure 11.0 kg/cm2,Max. pressure drop 0.5kg/cm2 ,Flow control Top mounted multi port valve ,Media Graded silex and sand,Make Waterlife/Pentair ,3. ACTIVATED CARBON FILTER Numbers required One No. Normal operating flow rate 1.0m3/hr ,Size of unit dia × Ht. mm 12×48 ,Material of construction FRP ,Normal operating pressure 2.5 kg/cm2,Max. Pressure Drop 0.5 kg/cm2 Flow control Top mounted multi port valve ,Media Activated Carbon ,Activated Carbon Make VBD/Eqvt. Make Waterlife/Pentair,4. ANTISCALANT DOSING SYSTEM No. required One No. ,Type Diaphragm type electronic pump Capacity 0 5 LPH Make E dose / HITECH 5.MICRON FILTER Quantity required Two No. Type Disposable cartridge Operating flow rate 1.0 m3/hr ,Operating pressure 2.5 kg/cm2,Micron rating 5 micron ,Type of cartridge PP Wound ,MoC Polycarbonate. 6. HIGH PRESSURE PUMP Quantity required One No. Operating flow rate 1.5 m3/hr ,Operating pressure 12 14 kg/cm 2 ,Make of pump Sumo/CRI/Eqvt. Type of drive Single phase, 230 V, 50 Hz 2900 rpm. 7. RO MENBRANE HOUSING Quantity required TWO No. Material of pressure tube FRP 4040 Element capacity 02 No. Max. working pressure 300 psi Make Waterlife 8. RO MENBRANE Quantity required Two No. Dimensions Dia 4?, Length?40? ,Working pressure 180 psi Element Spiral wound Membrane. Make /HITECH /Eqvt. Pore size of semi permeable membrane 0.0001 micron diameters. 9. ELECTRICAL CONTROL PANEL ,Quantity required One no. Material of construction SS with powder coating, skid mount. Electrical components make L and T/Siemens/Havell?s. 10.U.V System.11.Ozen nessed.Instruments 1.pressure gauges(0.7kg/cm2) 02 nos 100mm dia,L/AEqvt (0 15kg/cm2) 02 Nos. 65mm dia, L/AEqvt.2. Flow meters 02 Nos. (One reject and One Permeate) 3.Pressure limiting Switches 02 Nos. line mounted adjustable. 4. Conductivity meter panel mounted online, Digital.
1
-
125000
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE TEEs conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading,forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
6541.96
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
1209.3
-
689107.51
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for ROOF BEAMS.
0.63
-
7074.82
... More
Civil Engineering Work;Labour charges for jointing 100mm Dia. Scour Valve with flanged ends including cost of joining material such as bolts and nuts,rubber insertion, white lead including filling with water with lead up to 500 meters and testing to required presure complete(Reference to specifications BIS No.3114/94).
4
-
1265.32
... More
Civil Engineering Work;Construction of 904.0 m (3' 0 Inch)Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1 3)Prop. 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.(FOR Valve Pits) as directed by the Departmental Authorities.
10
-
67828.2
... More
Civil Engineering Work;Construction of 904.0 m (3' 0 Inch)Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1 3)Prop. 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
18
-
122090.76
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC FOOTINGS.
0.49
-
4731.79
... More
Civil Engineering Work;Supplying and fixing of 25mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete. for sump railings and inside and outside ladders and as directed by the Departmental authorities
105
-
32209.8
... More
Civil Engineering Work;Lowering, Laying and Jointing of 63mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
285
-
10277.1
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC FOOTINGS.
0.49
-
4730.9
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
1.15
-
4716.66
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
66.09
-
50026.83
... More
Civil Engineering Work;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
64.62
-
16918.81
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
1.44
-
118931.46
... More
Civil Engineering Work;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
3.01
-
217602.59
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
171.94
-
20577.78
... More
Civil Engineering Work;Labour charges for jointing 200mm Dia. Scour Valve with flanged ends including cost of joining material such as rubber insertion, white lead including filling with water with lead up to 500 meters and testing to required presure complete(Reference to specifications BIS No.3114/94). as directed by departmental authorities
2
-
1054.14
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
1.15
-
5053.38
... More
Civil Engineering Work;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
54.75
-
12612.21
... More
Civil Engineering Work;Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M 10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 MORTH
712.84
-
225300.21
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
620
-
214848.6
... More
Civil Engineering Work;DOOR of SIZE 0.90 x 2.00 m Providing and fixing Door Frames fabricated from sections made of galvanized Stell powder coated (base steel as per IS 513, galvanized as per IS 277 with zinc of 120 grams/square meter), the factory made section are powder coated with pure polyester powder of 50 60 microns thick with total coated thickness of 1.25mm, size of Door Frame section of 105x60mm with a rebate of 38mm to accommodate 35mm thick Door Shutter with groove to insert gasket in the frame section, frame sectiion filled with polyurethane foam, cut to length and joined by way of welding each frame provided with (a) 2mm thick MS powder coated butt hinges of 100mm long 3 Nos for Single Shutter, 6 Nos., for double shutter (b) CRCA electroplates stiffeners of 6 Nos 3 in each vertical (c) 40mm x 200mm x 1.20mm hold fasts screwd to stiffeners 6 Nos. with split end tail (d) Nylon Aldrops Receiver 1 No. for Single shutter frame (e) Tie Road 1 No. and supplying and fixing of Single Leaf Flush Door Shutter Solid bond Wood black Board type with Commercial ply on both faces of 30mm thick conforming to IS.2202 including cost of fixtures such as (i) 2 Nos. 250mm long M.S.powder coated Aldrops, (ii) 1 No. 250mm long 10mm Dia. M.S.Powder Coated Tower Bolt, (iii) 2 Nos. 125mm long M.S.powder coated Door Handles and (iv) 1 No. M.S.Powder coated Door Stopper and including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental authorities
1
-
7838.54
... More
Civil Engineering Work;Construction of un reinforced, design mix M 30 grade cement concrete pavement, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixer laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T and P etc., curing of concrete slabs for 14 days as per Design and drawing and Technical Specification Clause 1501 MORD.(As per APDSS and as directed by the Departmental Authorities) for Block Approaches.
50.4
-
311392.37
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
781.37
-
93514.36
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., Complete as directed by the Departmental Authorities
6
-
8739.24
... More
Civil Engineering Work;Lowering, Laying and Jointing of 63mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
210
-
7572.6
... More
Civil Engineering Work;Providing, Laying, Spreading and Compacting Graded Stone Aggregate to Wet Mix Macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site of work, laying in uniform layers in Sub Base/Base Course on a well prepared Sub Base and compacting with smooth wheel roller of 80 to 100 KN / Vibratory Roller 80 to 100 KN weight to achieve the desired density including lighting, barricading and maintenance of diversion etc., as per Tables.400.11 and 400.12 and technical specification Clause.406 MORD/ MORTH as directed by the department and including cost and conveyance of all materials to site of work and all operational, incidental, seigniorage and all labour charges etc., complete for finished item of work.
818.4
-
1663488.02
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
92.23
-
96473.5
... More
Civil Engineering Work;Construction of un reinforced, design mix M 30 grade cement concrete pavement,over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixer laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T and P etc., curing of concrete slabs for 14 days as per Design and drawing and Technical Specification Clause 1501 MORD.(As per APDSS and as directed by the Departmental Authorities) for Block Approaches.
79.2
-
490794.48
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, correction charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for roof SLAB.
56.13
-
568046.83
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
7.43
-
7962.81
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for LINTELS.
0.07
-
911.44
... More
Civil Engineering Work;RO Plant Supplying and laying of CPVC PIPES of 54.00mm OD Pipe SDR 11 and fittings or equal and for Hot and Cold confirming to IS.15778 2007 with malleable specials such as Tees, Elbows, Check nuts, unions, bushes etc., colvent cement including fixing in walls, ceiling floors including cost and conveyance of all materials to site of work and include for necessary excavation in all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making bores in walls ceiling etc., and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the department.
15
-
8623.35
... More
Civil Engineering Work;Manufacture,supply and delivery of unplasticised 160mm dia PVC pipes for potable water supplies conforming to IS 4985/2000 include of transportation to the sub divisional stores anywhere in AP exculding excise duty and sales tax etc., (4kg/cm2)
43.75
-
23759.75
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
71.86
-
73318.76
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 200mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
4
-
2785.84
... More
Civil Engineering Work;Bore wells Supply and run of 4 of 56/0.3mm (4.00Sq.mm) FR P.V.C. insulated flexible copper cableFRLS/FRLS H/HFFR/ ZHFR PVC insulated 1100V grade as per IS.694/1990 specification for Copper Cable of Category II of make V Guard/Bonton /Finecab/HPL /Million /Fortune Art / Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser/Beljin/ Rhino/ Standard / Vimal etc., including cost of cable, all materials and labour charges for fixing etc., complete as directed by the Department authorities.
585
-
126623.25
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 200mm Dia. Sluice Valve as directed by the Departmental Authorities.
4
-
2108.28
... More
Civil Engineering Work;Providing Independent Earthing from Main switch Board for earth continuity with No.8, G.I wire including excavation of earth in all soils upto 5' 6'' depth below ground level of section 5'x2'x3' duly providing 40mm Dia G.I Pipe of 2mts, length using GI bolts and nuts and fixing earth wire including supply and fixing 1' 6'' dia 0' 8'' depth hume pipe ring and refilling the pit with 40 Kgs hard coke, 20Kgs salt and excavated earth including all labour charges etc., complete for finished item of work and as directed by the Departmental authorities
1
-
4422.29
... More
Civil Engineering Work;Lowering and keeping in position of 100 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
224.12
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
6.4
-
765.95
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC PLINTH BEAMS.
0.63
-
7892.29
... More
Civil Engineering Work;RCC M 20 Design mix (Cement fine aggregate coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing,centering and shuttering etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and as directed by the Departmental authorities for precast slab for drain.
33.76
-
222753.88
... More
Civil Engineering Work;Painting to New wood work with primer and two coats with Synthetic enamel paint in all shades of Grade I aprpoved brand and colour including cost and conveyance of all materials to work site and all operational, incidential and all labour charges such as sand paper, cleaning the surface, cost of brushes etc., complete for finished item of work as directed by the department (Three coats).
1.78
-
323.46
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
3674.77
-
2659541.29
... More
Civil Engineering Work;RCC M 20 Design mix (Cement fine aggregate coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing,centering and shuttering etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and as directed by the Departmental authorities for precast slab for drain.
27.86
-
185441.73
... More
Civil Engineering Work;Brick Masonry in C.M.(1 6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
1.35
-
9046.57
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
12.54
-
7138.77
... More
Civil Engineering Work;Supply and delivery of D.I. Double Flanged swing check type (Reflux Valves) Non Return Valves of 100 mm Dia. conforming to IS 5312 (Pts.1 and 2 with amendments upto date, if any) having body, cover, door, bearing holder with D.I., Hinge pipe, Door pin, door suspension pin with stainless steel (IS.6603), body seat ring, door face ring, bearing bushes, plugs for hinge pin with leaded tin bronze (IS.318), bolts, nuts with carbon steel, gaskets with rubber, hinges with cast steel inlcuding cost and conveyance of all materials to work site and loading, unloading, transportation etc., complete as directed by the Departmental Authorities as directed by the Departmental Authorities.
2
-
36218.18
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC FOOTINGS.
0.49
-
4387.52
... More
Civil Engineering Work;Lowering and keeping in position of 100 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
4
-
768.44
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, correction charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for Raft.
109.35
-
784788.55
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
6.4
-
765.95
... More
Civil Engineering Work;Brick Masonry in C.M.(1 6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
1.35
-
9009.6
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 150mm Dia. Sluice Valve. as directed by the Departmental Authorities.
6
-
3048.12
... More
Civil Engineering Work;Filling with SAND intrenches sides of Foundations and Basements with initial lead in layeing not excuding 15cms thick consolidating each deposited layer by watering and ramming includings cost and conveyanced water to wrok site and all operational, incidental, labour charges, hire charges and T and P etc., complete for finished item of work. as directed by the Departmental Authorities.
7.45
-
9951.71
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 100mm Dia. (Scour Valve) , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete .(pn 1.0 (MPa) as directed by the Departmental Authorities
1
-
14172.34
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
387.16
-
46335.31
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 160mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
6
-
2290.5
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
139.73
-
116592.11
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
967.5
-
549143.33
... More
Civil Engineering Work;Supplying and fixing 602 x 602 mm CI man hole frame and cover (light weight) 30 Kgs as directed by the Departmental authorities
8
-
25767.92
... More
Civil Engineering Work;Providing Independent Earthing from Main switch Board for earth continuity with No.8, G.I wire including excavation of earth in all soils upto 5' 6'' depth below ground level of section 5'x2'x3' duly providing 40mm Dia G.I Pipe of 2mts, length using GI bolts and nuts and fixing earth wire including supply and fixing 1' 6'' dia 0' 8'' depth hume pipe ring and refilling the pit with 40 Kgs hard coke, 20Kgs salt and excavated earth including all labour charges etc., complete for finished item of work and as directed by the Departmental authorities
1
-
4422.29
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for Chajja's.
0.48
-
6311.1
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
313.5
-
36309.57
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
1.72
-
137406.07
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
1000
-
1125920
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 160mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
720.32
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
81.08
-
361690.58
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 150mm Dia. Sluice Valve. as directed by the Departmental Authorities.
10
-
4864.4
... More
Civil Engineering Work;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities for pipeline bed.
129.16
-
131781.95
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Drains walls.
430.21
-
3527704.79
... More
Civil Engineering Work;Supplying and fixing of RCC Cover of 22 Inch Dia. of 3 Inch thick with nominal reinforcement and hooks for lifting including cost and conveyance of all materials to work site and operational, incidental and all labour charges for fixing charges etc., complete for finiahed item of work.
2
-
1506.54
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR BOTTOM SLAB.
25.98
-
190713.2
... More
Civil Engineering Work;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Culvert Slab.
34.31
-
211308.43
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 63mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
3
-
228.36
... More
Civil Engineering Work;Brick Masonry in C.M.(1 6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
1.35
-
9050.17
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 100mm Dia. , including cost and conveyance of all materials to work site, loading, unloading traansportation charges and excluding all other connected taxes etc., complete.(pn 1.0 (MPa)
1
-
14172.34
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities for Side Berms
1043.53
-
582644.54
... More
Civil Engineering Work;Construction of un reinforced, design mix M 30 grade cement concrete pavement, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixer laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T and P etc., curing of concrete slabs for 14 days as per Design and drawing and Technical Specification Clause 1501 MORD.(As per APDSS and as directed by the Departmental Authorities) for Block Approach.
91.65
-
531819.29
... More
Civil Engineering Work;RO Plant Supplying and laying of CPVC PIPES of 34.9mm OD Pipe SDR 11 and fittings or equal and for Hot and Cold confirming to IS.15778 2007 with malleable specials such as Tees, Elbows, Check nuts, unions, bushes etc., colvent cement including fixing in walls, ceiling floors including cost and conveyance of all materials to site of work and include for necessary excavation in all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making bores in walls ceiling etc., and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the department.
3
-
818.01
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
2.24
-
178947.44
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
29.93
-
3466.49
... More
Civil Engineering Work;Filling with Stone Crusher Dust for filling Plot Area and to fill the ditch portions wherever necessary in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental and all labour charges etc., complete for finished item of work as directed by the departmental authorities.
316.37
-
285837.13
... More
Civil Engineering Work;Lowering, Laying and Jointing of 63mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
315
-
11358.9
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
355.7
-
123260.72
... More
Civil Engineering Work;RO Plant Supplying and fixing of 32mm N.B. size Gunmetal Gate (G.M.Peet) Valve as per IS.778, Class I of Indian make heavy type including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work as directed by the department.
1
-
1898.51
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
267
-
92523.51
... More
Civil Engineering Work;Supply and fixing to Cement JALLIES 40mm thick including cost and conveyance of all materials and water to work site and all operational, incidental charges, fixing, laying and all labour charges, curing etc., complete for finished item of work as directed by the departmental authorities
0.35
-
102.2
... More
Civil Engineering Work;Supply and delivery of tamper proof D.I., Flanged Single Chamber Air Release Valves of 50mm Dia. with body and cover made of Ductile Iron Grade GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per IS 1865, IS 3896 2 with food grade epoxy powder coating (EP P) (Min 250 Micron) inside and outside of color blue RAL 5005. All internal parts such as float, shell, cove bolts etc., made of austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/ EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination flange drilling as per IS 1538 and including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities.
1
-
12860.08
... More
Civil Engineering Work;Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per MORTH specification and as directed by the Engineer in Charge.
4092
-
141460.44
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
111.89
-
63053.37
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 100mm Dia. Sluice Valve. as directed by the Departmental Authorities.
2
-
670.02
... More
Civil Engineering Work;Filling with SAND intrenches sides of Foundations and Basements with initial lead in layeing not excuding 15cms thick consolidating each deposited layer by watering and ramming includings cost and conveyanced water to wrok site and all operational, incidental, labour charges, hire charges and T and P etc., complete for finished item of work. as directed by the Departmental Authorities.
4.24
-
5663.79
... More
Civil Engineering Work;Bore wells 180mm dia. Pvc Casing pipe perforation charge
91.5
-
31293
... More
Civil Engineering Work;Filling with Stone Crusher Dust for filling Plot Area and to fill the ditch portions wherever necessary in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental and all labour charges etc., complete for finished item of work as directed by the departmental authorities.
564.38
-
537888
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
1508.46
-
858736.11
... More
Civil Engineering Work;Lowering and keeping in position of 150 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work as directed by the Departmental Authorities.
2
-
651.24
... More
Civil Engineering Work;0.60 x 0.90 m Window Providing and Fixing of openable windows made of Pre painted steel (base steel as per IS 513 of 0.58mm thick Galvanized as per IS 277 with zinc of 120 GSM ) primer coated with epoxy primer of 5 7 microns thick. finish painted with a polyester paint of 12 16 microns thick and back coated with 5 7 microns thick alkyd backer and section for outer frame of 48 x 50mm, centre mullion of 48 x 50 mm section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stairless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, including 10mm square guard bars with 6 Inch (152.4mm) pitch etc., complete for finished item of work. (Single shutter window 2'0 Inch x 4'0 Inch (609.6mm x 1219.2mm). Outer frame section size of 48 x 50mm shutter frame section size of 48 x 25mm and as directed by the Departmental Authorities
1
-
3522.84
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 100mm Dia. , including cost and conveyance of all materials to work site, loading, unloading traansportation charges and excluding all other connected taxes etc., complete.(pn 1.0 (MPa)
1
-
14172.34
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 100mm Dia. , including cost and conveyance of all materials to work site, loading, unloading traansportation charges and excluding all other connected taxes etc., complete.(pn 1.0 (MPa)
2
-
28344.68
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 110mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
390.84
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
267.15
-
356858.97
... More
Civil Engineering Work;Painting to kerb with approved Synthetic enamel paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost and conveyance of all materials, labour charges etc; complete for finished item of work (APSS No. 912)and as directed by the Department authorities
427.7
-
146162.2
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
269.75
-
1106363.44
... More
Civil Engineering Work;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
64.62
-
16918.81
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
877
-
634711.21
... More
Civil Engineering Work;Lowering, Laying and Jointing of 200mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
1000
-
101360
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE Pipe 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
380.5
-
428412.56
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Drains walls.
54.35
-
442197.58
... More
Civil Engineering Work;Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI marked conforming to IS 1729 1979 of reputed make with cement caulked joints and fixing as per site requirements including painting black with Japan paint and fixing with necessary wooden blocks fixed in the masonry walls in cement mortar (1½ 1) and including fixing of M.S. clamps if necessary with required no. of Bombay nails etc., complete complete for Vent Pipe.as directed by the Departmental authorities
12
-
12570.36
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 160mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
4
-
1440.64
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, correction charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for Raft.
139.23
-
1011450.26
... More
Civil Engineering Work;Supply and delivery of Rubber Packing 6mm thick including cost and conveyance of all materials to site of work etc., complete as directed by the Departmental Authorities.
7.2
-
760.75
... More
Civil Engineering Work;Supply ,delivery and fixing of 50 mm dia Gunmetal gate valve (GM Peet) as per IS 778 Class I Indian make heavy type including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities
21
-
78878.31
... More
Civil Engineering Work;Supplying and fixing of approved make Automatic Star Delta Starter of make C and S/Crompton/L and T / Siemens/BCH suitable for 3 Phase, 415 V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete and as directed by the Departmental authorities
3
-
55293.57
... More
Civil Engineering Work;Plastering 12 mm thick Single coat with C.M. (1 4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete. for Ceiling as directed by the Departmental Authorities.
64.62
-
22198.26
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 200mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
1392.92
... More
Civil Engineering Work;Construction of 904.0 m (3' 0 Inch)Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1 3)Prop. 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.(FOR Valve Pits) as directed by the Departmental Authorities.
8
-
54262.56
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 100mm Dia. Scour Valve. as directed by the Departmental Authorities.
2
-
670.02
... More
Civil Engineering Work;Lowering and keeping in position of 100 mm Dia. SCOUR VALVE including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work as directed by the Departmental Authorities.
1
-
192.11
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm x 200mm Dia. HDPE Reducers conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
3047.16
... More
Civil Engineering Work;Supplying and fixing of 8? SWG TEE junction of first class including cost and conveyance of all materials, air tight cement joints labour charges etc., complete.as directed by the Departmental authorities
8
-
4299.2
... More
Civil Engineering Work;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
64.62
-
14885.86
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
2530.09
-
302801.17
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
6.3
-
28103.73
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
210
-
23860.2
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
1.1
-
90850.42
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR TOP DOME SLAB.
4.8
-
82449.89
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
91.67
-
93530.9
... More
Civil Engineering Work;Construction of 904.0 m (3' 0 Inch)Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1 3)Prop. 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
6
-
40696.92
... More
Civil Engineering Work;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities for pipeline bed.
232.62
-
217974.24
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.85
-
70202.6
... More
Civil Engineering Work;Plastering 12 mm thick Single coat with C.M. (1 3) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete for finished item of work etc., complete. for Ceiling as directed by the Departmental Authorities.
7.5
-
2990.1
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.3
-
24777.39
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 150mm Dia. Sluice Valve. as directed by the Departmental Authorities.
6
-
3048.12
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for ROOF BEAMS.
0.63
-
7623.02
... More
Civil Engineering Work;Providing Independent Earthing from Main switch Board for earth continuity with No.8, G.I wire including excavation of earth in all soils upto 5' 6'' depth below ground level of section 5'x2'x3' duly providing 40mm Dia G.I Pipe of 2mts, length using GI bolts and nuts and fixing earth wire including supply and fixing 1' 6'' dia 0' 8'' depth hume pipe ring and refilling the pit with 40 Kgs hard coke, 20Kgs salt and excavated earth including all labour charges etc., complete for finished item of work and as directed by the Departmental authorities
1
-
4422.29
... More
Civil Engineering Work;Labour charges for Jointing C.I., D.I. pipes and fittings with rubber gasket Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 100mm Dia. Sluice Valve. as directed by the Departmental Authorities.
1
-
335.01
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 110mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
88
-
17196.96
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
7.75
-
8006.99
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
12.54
-
7117.58
... More
Civil Engineering Work;Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom for finished item of work as per MORTH and H and as directed by the Engineer in Charge.
4092
-
30158.04
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
618.79
-
74056.79
... More
Civil Engineering Work;Jointing for 200mm Dia CI/DI pipes and fittings with rubber gasket (push on joint), excluding the cost of the gasket but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 as directed by the Departmental Authorities.
800
-
225304
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300 2 of MoRT and H, including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities
171.94
-
106453.21
... More
Civil Engineering Work;Plastering 12 mm thick Single coat with C.M. (1 3) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete for finished item of work etc., complete. for Ceiling as directed by the Departmental Authorities.
7.5
-
3002.1
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE TEEs conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading,forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
6541.96
... More
Civil Engineering Work;Plastering 12 mm thick Single coat with C.M. (1 4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete. for Ceiling as directed by the Departmental Authorities.
64.62
-
25165.61
... More
Civil Engineering Work;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
0.88
-
65997.59
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
273.6
-
94810.61
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
1848
-
214035.36
... More
Civil Engineering Work;Earthwork in excavation as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities for pipe line trench work
1084.91
-
129842.03
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (250 I.D)
243.71
-
228434.26
... More
Civil Engineering Work;Lowering, Laying and Jointing of 160mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
4697.33
-
353286.19
... More
Civil Engineering Work;Construction of 904m (3' 0 Inch) Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1 3)Prop., 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
6
-
64044.78
... More
Civil Engineering Work;Construction of 904.0 m (3' 0 Inch)Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1 3)Prop. 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
13
-
88176.66
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain bed.
196.32
-
1040105.32
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
27.49
-
28048.05
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
70.65
-
8182.68
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR TOP DOME SLAB.
3.14
-
49658.41
... More
Civil Engineering Work;RO Plant Supplying and fixing of 32mm N.B. size Gunmetal Gate (G.M.Peet) Valve as per IS.778, Class I of Indian make heavy type including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work as directed by the department.
1
-
1898.51
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, correction charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for roof SLAB.
66.53
-
667053.73
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., Complete as directed by the Departmental Authorities
8
-
11652.32
... More
Civil Engineering Work;Supply and run of 4 of 56/0.3mm (4.00Sq.mm) FR P.V.C. insulated flexible copper cableFRLS/FRLS H/HFFR/ ZHFR PVC insulated 1100V grade as per IS.694/1990 specification for Copper Cable of Category II of make V Guard/Bonton /Finecab/ HPL / Million /Fortune Art / Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser/Beljin /Rhino/ Standard / Vimal etc., including cost of cable, all materials and labour charges for fixing etc., complete as directed by the Department authorities.
50
-
10508.5
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
109.44
-
463231.07
... More
Civil Engineering Work;Supply and Erection of PANEL MOUNTING 125 A, 4 Pole, 25 KA, MCCB adjustable of make L and T/Schneider/Siemens/Legrand/Hager confirms to IS/IEC 60847 2 having breaking capacity 35/36 KA with Thermal Magnetic setting/ Microprocessor based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental Authorities.
2
-
24768.62
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
22.36
-
23101.46
... More
Civil Engineering Work;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
0.92
-
68997.48
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain bed.
61.99
-
331905
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
281.16
-
158917.26
... More
Civil Engineering Work;Lowering and keeping in position of 150 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
5
-
1899.35
... More
Civil Engineering Work;Plastering 12 mm thick Single coat with C.M. (1 4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete. for Ceiling as directed by the Departmental Authorities.
64.62
-
25378.86
... More
Civil Engineering Work;Supply and delivery of Bolts and Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values as directed by departmental authorities.
96
-
12106.56
... More
Civil Engineering Work;Lowering, Laying and Jointing of 63mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
195
-
7031.7
... More
Civil Engineering Work;Lowering, Laying and Jointing of 200mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
200.8
-
22487.59
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR BOTTOM SLAB.
41.69
-
302937.05
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR BOTTOM SLAB.
21
-
152556.6
... More
Civil Engineering Work;Construction of 904m (3' 0 Inch) Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1 3)Prop., 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
12
-
128089.56
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
350
-
394072
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE TEEs conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
13
-
22775.22
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities Cost of DWC Pipe (200 I.D)
150.38
-
90381.39
... More
Civil Engineering Work;Bore wells Geological Survey charges excluding taxes for Plain Area
3
-
3900
... More
Civil Engineering Work;Construction of 904m (3' 0 Inch) Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1 3)Prop., 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
4
-
42696.52
... More
Civil Engineering Work;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
0.72
-
53998.03
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (200 I.D)
719.86
-
76881.05
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Culvert walls.
8.1
-
64247.66
... More
Civil Engineering Work;Bore wells Geological Survey charges excluding taxes for Plain Area
5
-
6500
... More
Civil Engineering Work;Supply ,delivery and fixing of 50 mm dia Gunmetal gate valve (GM Peet) as per IS 778 Class I Indian make heavy type including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities
19
-
71366.09
... More
Civil Engineering Work;Supplying and fixing of approved make Automatic Star Delta Starter of make C and S/Crompton/L and T / Siemens/BCH suitable for 3 Phase, 415 V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete and as directed by the Departmental authorities
2
-
36595.4
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, correction charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for Raft.
117.94
-
867855.59
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
1325
-
958942.25
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
49.5
-
66122.1
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC COLUMNS.
0.92
-
12212.3
... More
Civil Engineering Work;Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M 10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 MORTH
741
-
229280.22
... More
Civil Engineering Work;Bore wells Cost and supply of 175 mm dia. PVC blue threaded casing pipe(CM) including transportation to the work site.
183
-
211365
... More
Civil Engineering Work;RO Plant Supplying and fixing of 32mm N.B. size Gunmetal Gate (G.M.Peet) Valve as per IS.778, Class I of Indian make heavy type including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work as directed by the department.
1
-
1898.51
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE TEEs conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
54
-
94604.76
... More
Civil Engineering Work;Labour charges for jointing 100mm Dia. Scour Valve with flanged ends including cost of joining material such as bolts and nuts rubber insertion, white lead including filling with water with lead up to 500 meters and testing to required presure complete(Reference to specifications BIS No.3114/94). as directed by departmental authorities
2
-
632.66
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
6.4
-
765.95
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538Supply and delivery of .D.I. Double Flanged Sluice Valves of 200mm Dia.including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn 1.0 (MPa) as directed by the Departmental Authorities
1
-
28607.12
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm x 200mm Dia. HDPE Reducers conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
3
-
4570.74
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for ROOF SLABS.
1.4
-
18177.66
... More
Civil Engineering Work;Filling with Gravel for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
7.75
-
3197.81
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 100mm Dia. , including cost and conveyance of all materials to work site, loading, unloading traansportation charges and excluding all other connected taxes etc., complete.(pn 1.0 (MPa)
1
-
14172.34
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
1.15
-
5079.72
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 63mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
1
-
76.12
... More
Civil Engineering Work;Bore wells Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 350/450 mm hole (for insertion of 160/175/200mm PVC Pipe/175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burled channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebuIlled pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, damps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per 1SI specification used for rotary tube well. The pebbled gravel acking should be carried out in such a way that the theoretical quantity consumed completely. The entire work to be carried out as per I.S. 2800 Part I and II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc.,
183
-
248880
... More
Civil Engineering Work;DOOR of SIZE 0.90 x 2.00 m Providing and fixing Door Frames fabricated from sections made of galvanized Stell powder coated (base steel as per IS 513, galvanized as per IS 277 with zinc of 120 grams/square meter), the factory made section are powder coated with pure polyester powder of 50 60 microns thick with total coated thickness of 1.25mm, size of Door Frame section of 105x60mm with a rebate of 38mm to accommodate 35mm thick Door Shutter with groove to insert gasket in the frame section, frame sectiion filled with polyurethane foam, cut to length and joined by way of welding each frame provided with (a) 2mm thick MS powder coated butt hinges of 100mm long 3 Nos for Single Shutter, 6 Nos., for double shutter (b) CRCA electroplates stiffeners of 6 Nos 3 in each vertical (c) 40mm x 200mm x 1.20mm hold fasts screwd to stiffeners 6 Nos. with split end tail (d) Nylon Aldrops Receiver 1 No. for Single shutter frame (e) Tie Road 1 No. and supplying and fixing of Single Leaf Flush Door Shutter Solid bond Wood black Board type with Commercial ply on both faces of 30mm thick conforming to IS.2202 including cost of fixtures such as (i) 2 Nos. 250mm long M.S.powder coated Aldrops, (ii) 1 No. 250mm long 10mm Dia. M.S.Powder Coated Tower Bolt, (iii) 2 Nos. 125mm long M.S.powder coated Door Handles and (iv) 1 No. M.S.Powder coated Door Stopper and including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental authorities
1
-
7688.86
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 110mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
390.84
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Drains walls.
73.1
-
591621.69
... More
Civil Engineering Work;Construction of un reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T and P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days as per design and drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities.
353.46
-
2293676.17
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC COLUMNS.
0.92
-
11334.38
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR TOP DOME SLAB.
5.86
-
100553.97
... More
Civil Engineering Work;Construction of granular sub base by providing well graded material for grading III spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.(CBR Value Minimum 30) including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as directed by the Departmental Authorities
1072.32
-
1581436.09
... More
Civil Engineering Work;Bore wells Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 8.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
183
-
25989.66
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.3
-
24777.39
... More
Civil Engineering Work;0.60 x 0.90 m Window Providing and Fixing of openable windows made of Pre painted steel (base steel as per IS 513 of 0.58mm thick Galvanized as per IS 277 with zinc of 120 GSM ) primer coated with epoxy primer of 5 7 microns thick. finish painted with a polyester paint of 12 16 microns thick and back coated with 5 7 microns thick alkyd backer and section for outer frame of 48 x 50mm, centre mullion of 48 x 50 mm section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stairless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, including 10mm square guard bars with 6 Inch (152.4mm) pitch etc., complete for finished item of work. (Single shutter window 2'0 Inch x 4'0 Inch (609.6mm x 1219.2mm). Outer frame section size of 48 x 50mm shutter frame section size of 48 x 25mm and as directed by the Departmental Authorities
1
-
3522.84
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (150 I.D)
455
-
165424.35
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 100mm Dia. (Scour Valve) , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete .(pn 1.0 (MPa) as directed by the Departmental Authorities
1
-
14172.34
... More
Civil Engineering Work;RCC M 20 Design mix (Cement fine aggregate coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing,centering and shuttering etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and as directed by the Departmental authorities for precast slab for drain.
20.71
-
138669.19
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR TOP RING BEAM.
2.2
-
27337.18
... More
Civil Engineering Work;RCC M 20 Design mix (Cement fine aggregate coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing,centering and shuttering etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and as directed by the Departmental authorities for precast slab for drain.
35.75
-
240162.42
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, correction charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for roof SLAB.
140.59
-
1409860.42
... More
Civil Engineering Work;Supplying and fixing of RCC Cover of 22 Inch Dia. of 3 Inch thick with nominal reinforcement as directed by the department and hooks for lifting including cost and conveyance of all materials to work site and operational, incidental and all labour charges for fixing charges etc., complete for finished item of work.
1
-
753.27
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
53.43
-
50376.48
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (250 I.D)
180
-
168717.6
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 100mm Dia. Scour Valve. as directed by the Departmental Authorities.
2
-
670.02
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Culvert walls.
9.9
-
80350.58
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc.,complete as directed by the Departmental Authorities.
3
-
1506.54
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
5.13
-
423693.32
... More
Civil Engineering Work;Bore wells Cost and supply of 180 mm dia.cap.
3
-
945
... More
Civil Engineering Work;Supplying and fixing of 100mm Dia. B class G.I. Pipe properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for connecting Motor at Sump to Panel Board and as directed by the Departmental authorities
30
-
25972.5
... More
Civil Engineering Work;Supply and run of 4 of 56/0.3mm (4.00Sq.mm) FR P.V.C. insulated flexible copper cableFRLS/FRLS H/HFFR/ ZHFR PVC insulated 1100V grade as per IS.694/1990 specification for Copper Cable of Category II of make V Guard/Bonton /Finecab/ HPL / Million /Fortune Art / Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser/ Beljin/Rhino/ Standard / Vimal etc., including cost of cable, all materials and labour charges for fixing etc., complete as directed by the Department authorities.
50
-
10822.5
... More
Civil Engineering Work;Filling with Stone Crusher Dust for filling Plot Area and to fill the ditch portions wherever necessary in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental and all labour charges etc., complete for finished item of work as directed by the departmental authorities.
556.36
-
557823.23
... More
Civil Engineering Work;Supply and fixing to Cement JALLIES 40mm thick including cost and conveyance of all materials and water to work site and all operational, incidental charges, fixing, laying and all labour charges, curing etc., complete for finished item of work as directed by the departmental authorities
0.35
-
102.2
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
210.77
-
913373.9
... More
Civil Engineering Work;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities for pipeline bed.
30.38
-
28467.28
... More
Civil Engineering Work;Bore wells Geological Survey charges excluding taxes for Plain Area
3
-
3900
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
120.5
-
135673.36
... More
Civil Engineering Work;Lowering and keeping in position of 100 mm Dia. Scour valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
4
-
768.44
... More
Civil Engineering Work;Providing Independent Earthing from Main switch Board for earth continuity with No.8, G.I wire including excavation of earth in all soils upto 5' 6'' depth below ground level of section 5'x2'x3' duly providing 40mm Dia G.I Pipe of 2mts, length using GI bolts and nuts and fixing earth wire including supply and fixing 1' 6'' dia 0' 8'' depth hume pipe ring and refilling the pit with 40 Kgs hard coke, 20Kgs salt and excavated earth including all labour charges etc., complete for finished item of work and as directed by the Departmental authorities
1
-
4422.29
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm x 200mm Dia. HDPE Reducers conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
3
-
3537.96
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR TOP RING BEAM.
2.37
-
29357.4
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for LINTELS.
0.07
-
917.71
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 160mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
8
-
3054
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
1824.92
-
211362.23
... More
Civil Engineering Work;Filling with Local available Earth with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering including cost and conveyance all materials and water to work site and all operational charges, incidental charges and all labour charges, hire charges, complete for finished item of work and as directed by the departmental authorities.
2304.13
-
525226.43
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for LINTELS.
0.07
-
917.58
... More
Civil Engineering Work;Supply and delivery of Rubber Packing 6mm thick including cost and conveyance of all materials to site of work etc., complete as directed by the Departmental Authorities.
7.2
-
760.75
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 100mm Dia. (Scour Valve) , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete .(pn 1.0 (MPa) as directed by the Departmental Authorities
1
-
14172.34
... More
Civil Engineering Work;Brick Masonry in C.M.(1 6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
7.4
-
49608.34
... More
Civil Engineering Work;Construction of un reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T and P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days as per design and drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities.
1202.1
-
7500286.57
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
1358.65
-
157358.84
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
76.61
-
79150.39
... More
Civil Engineering Work;Lowering, Laying and Jointing of 63mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
1148
-
38285.8
... More
Civil Engineering Work;Construction of granular sub base by providing well graded material for grading III spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.(CBR Value Minimum 30) including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as directed by the Departmental Authorities
2037.98
-
4138913.2
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 100mm Dia. Scour Valve. as directed by the Departmental Authorities.
2
-
670.02
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (200mm I.D)
200
-
21360
... More
Civil Engineering Work;Construction of 904m (3' 0 Inch) Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1 3)Prop., 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
12
-
128089.56
... More
Civil Engineering Work;Supply and delivery of Rubber Packing 6mm thick including cost and conveyance of all materials to site of work etc., complete as directed by the Departmental Authorities.
10.8
-
1141.13
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE TEEs conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading,forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
1
-
3270.98
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
1.15
-
5102.6
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (250 I.D)
188
-
176216.16
... More
Civil Engineering Work;0.60 x 0.90 m Window Providing and Fixing of openable windows made of Pre painted steel (base steel as per IS 513 of 0.58mm thick Galvanized as per IS 277 with zinc of 120 GSM ) primer coated with epoxy primer of 5 7 microns thick. finish painted with a polyester paint of 12 16 microns thick and back coated with 5 7 microns thick alkyd backer and section for outer frame of 48 x 50mm, centre mullion of 48 x 50 mm section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stairless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, including 10mm square guard bars with 6 Inch (152.4mm) pitch etc., complete for finished item of work. (Single shutter window 2'0 Inch x 4'0 Inch (609.6mm x 1219.2mm). Outer frame section size of 48 x 50mm shutter frame section size of 48 x 25mm and as directed by the Departmental Authorities
1
-
3522.84
... More
Civil Engineering Work;Filling with Local available Earth with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering including cost and conveyance all materials and water to work site and all operational charges, incidental charges and all labour charges, hire charges, complete for finished item of work and as directed by the departmental authorities.
6091.19
-
1353096.95
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 100mm Dia. , including cost and conveyance of all materials to work site, loading, unloading traansportation charges and excluding all other connected taxes etc., complete.(pn 1.0 (MPa)
1
-
14172.34
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for WALLS.
134.96
-
1796212.33
... More
Civil Engineering Work;Bore wells Supply and Erection of PANEL MOUNTING 125 A, 4 Pole, 25 KA, MCCB adjustable of make L and T/Schneider/Siemens/Legrand/Hager confirms to IS/IEC 60847 2 having breaking capacity 35/36 KA with Thermal Magnetic setting/ Microprocessor based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the department.
3
-
37152.93
... More
Civil Engineering Work;Supplying and fixing of approved make Automatic Star Delta Starter of make C and S/Crompton/L and T / Siemens/BCH suitable for 3 Phase, 415 V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete and as directed by the Departmental authorities
3
-
55293.57
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
7.75
-
8305.75
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, correction charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for roof SLAB.
37.25
-
377767.9
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.42
-
33552.65
... More
Civil Engineering Work;Supply ,delivery and fixing of 50 mm dia Gunmetal gate valve (GM Peet) as per IS 778 Class I Indian make heavy type including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities
54
-
202829.94
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
7.75
-
6826.82
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538Supply and delivery of .D.I. Double Flanged Sluice Valves of 200mm Dia.including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn 1.0 (MPa) as directed by the Departmental Authorities
4
-
114428.48
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Drain Walls
271.76
-
2119866.6
... More
Civil Engineering Work;Construction of 904.0 m (3' 0 Inch)Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1 3)Prop. 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.(FOR Valve Pits) as directed by the Departmental Authorities.
6
-
40696.92
... More
Civil Engineering Work;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities for pipeline bed.
94.49
-
89089.9
... More
Civil Engineering Work;Providing High Yield Strenth Deformed STEEL (HYSD) / Thermo Mechanically Treated (TMT) Steel Bars (Fe 415/Fe.500 Grade as per IS1786 1979) of different of diameters for RCC Works including labour charges for straightening, cutting, bending to required size and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars and including all wastage, such as overlaps, couplings, chairs, spacer bars and binding wire, cover blocks and all incidental, Operational labour charges such as cutting, bending, placing in position, tying, including sales and other taxes on all materials etc., complete for finished item of work for all Floors. Payment will be made on the basis of wieght of fabrication deformed bars only. No re rolled steel shall be allowed for 8mm to 40mm.
7.79
-
622321.68
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
61.86
-
274475.29
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
77.46
-
79032.44
... More
Civil Engineering Work;Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI marked conforming to IS 1729 1979 of reputed make with cement caulked joints and fixing as per site requirements including painting black with Japan paint and fixing with necessary wooden blocks fixed in the masonry walls in cement mortar (1½ 1) and including fixing of M.S. clamps if necessary with required no. of Bombay nails etc., complete complete for Vent Pipe.as directed by the Departmental authorities
12
-
12570.36
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities for Side Berms
604.55
-
451127.3
... More
Civil Engineering Work;0.60 x 0.90 m Window Providing and Fixing of openable windows made of Pre painted steel (base steel as per IS 513 of 0.58mm thick Galvanized as per IS 277 with zinc of 120 GSM ) primer coated with epoxy primer of 5 7 microns thick. finish painted with a polyester paint of 12 16 microns thick and back coated with 5 7 microns thick alkyd backer and section for outer frame of 48 x 50mm, centre mullion of 48 x 50 mm section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stairless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, including 10mm square guard bars with 6 Inch (152.4mm) pitch etc., complete for finished item of work. (Single shutter window 2'0 Inch x 4'0 Inch (609.6mm x 1219.2mm). Outer frame section size of 48 x 50mm shutter frame section size of 48 x 25mm and as directed by the Departmental Authorities
1
-
3522.84
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Drains walls.
93.82
-
765570.26
... More
Civil Engineering Work;Supplying and fixing of 25mm Dia. Nominal dia G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for Sump Railings.
100
-
30676
... More
Civil Engineering Work;RO Plant Supplying and laying of CPVC PIPES of 34.9mm OD Pipe SDR 11 and fittings or equal and for Hot and Cold confirming to IS.15778 2007 with malleable specials such as Tees, Elbows, Check nuts, unions, bushes etc., colvent cement including fixing in walls, ceiling floors including cost and conveyance of all materials to site of work and include for necessary excavation in all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making bores in walls ceiling etc., and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the department.
3
-
818.01
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300 2 of MoRT and H, including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities
223.21
-
185092.43
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 100mm Dia. (Scour Valve) , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete .(pn 1.0 (MPa) as directed by the Departmental Authorities
1
-
14172.34
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Drains walls.
178.79
-
1436144.98
... More
Civil Engineering Work;Lowering and keeping in position of 150 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
3
-
1139.61
... More
Civil Engineering Work;Supplying and fixing of 25mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete. for sump railings and inside and outside ladders and as directed by the Departmental authorities
105
-
32209.8
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538Supply and delivery of .D.I. Double Flanged Sluice Valves of 200mm Dia.including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn 1.0 (MPa) as directed by the Departmental Authorities
2
-
57214.24
... More
Civil Engineering Work;Bore wells Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 350/450 mm hole (for insertion of 160/175/200mm PVC Pipe/175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burled channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebuIlled pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, damps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per 1SI specification used for rotary tube well. The pebbled gravel acking should be carried out in such a way that the theoretical quantity consumed completely. The entire work to be carried out as per I.S. 2800 Part I and II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc.,
183
-
248880
... More
Civil Engineering Work;Lowering, Laying and Jointing of 200mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
220.1
-
24649
... More
Civil Engineering Work;Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with S/S ends carefully into trench and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Reference to specifications. BIS No.3114/1994) 200 mm dia DI pipe.
3300
-
379962
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
7.75
-
5866.36
... More
Civil Engineering Work;Painting to kerb with approved Synthetic enamel paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost and conveyance of all materials, labour charges etc; complete for finished item of work (APSS No. 912)and as directed by the Department authorities
837.62
-
286248.26
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.54
-
44599.3
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
1.15
-
4983.54
... More
Civil Engineering Work;Supplying and fixing 602 x 602 mm CI man hole frame and cover (light weight) 30 Kgs as directed by the Departmental authorities
8
-
25767.92
... More
Civil Engineering Work;Construction of 904.0 m (3' 0 Inch)Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1 3)Prop. 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
15
-
101742.3
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
9.53
-
40338.01
... More
Civil Engineering Work;DOOR of SIZE 0.90 x 2.00 m Providing and fixing Door Frames fabricated from sections made of galvanized Stell powder coated (base steel as per IS 513, galvanized as per IS 277 with zinc of 120 grams/square meter), the factory made section are powder coated with pure polyester powder of 50 60 microns thick with total coated thickness of 1.25mm, size of Door Frame section of 105x60mm with a rebate of 38mm to accommodate 35mm thick Door Shutter with groove to insert gasket in the frame section, frame sectiion filled with polyurethane foam, cut to length and joined by way of welding each frame provided with (a) 2mm thick MS powder coated butt hinges of 100mm long 3 Nos for Single Shutter, 6 Nos., for double shutter (b) CRCA electroplates stiffeners of 6 Nos 3 in each vertical (c) 40mm x 200mm x 1.20mm hold fasts screwd to stiffeners 6 Nos. with split end tail (d) Nylon Aldrops Receiver 1 No. for Single shutter frame (e) Tie Road 1 No. and supplying and fixing of Single Leaf Flush Door Shutter Solid bond Wood black Board type with Commercial ply on both faces of 30mm thick conforming to IS.2202 including cost of fixtures such as (i) 2 Nos. 250mm long M.S.powder coated Aldrops, (ii) 1 No. 250mm long 10mm Dia. M.S.Powder Coated Tower Bolt, (iii) 2 Nos. 125mm long M.S.powder coated Door Handles and (iv) 1 No. M.S.Powder coated Door Stopper and including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental authorities
1
-
7838.54
... More
Civil Engineering Work;Supply and delivery of D.I. D/F Specials as per specifications of IS No.,7181/1986, 5531/1988 and 3950/1979 inlcuding cost and conveyance loading unloading etc., complete as directed by the Departmental Authorities.
500
-
67330
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE TEEs conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading,forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
3
-
9812.94
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for Chajja's.
0.48
-
6292.84
... More
Civil Engineering Work;Lowering and keeping in position of 150 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
3
-
1139.61
... More
Civil Engineering Work;Supply and Erection of PANEL MOUNTING 125 A, 4 Pole, 25 KA, MCCB adjustable of make L and T/Schneider/Siemens/Legrand/Hager confirms to IS/IEC 60847 2 having breaking capacity 35/36 KA with Thermal Magnetic setting/ Microprocessor based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental Authorities.
2
-
24768.62
... More
Civil Engineering Work;Supplying and fixing of 8? SWG TEE junction of first class including cost and conveyance of all materials, air tight cement joints labour charges etc., complete.as directed by the Departmental authorities
8
-
4299.2
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 200mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
1
-
639.65
... More
Civil Engineering Work;Lowering and keeping in position of 100 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
224.12
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC FOOTINGS.
0.49
-
4787.28
... More
Civil Engineering Work;Supply and delivery of D.I. Double Flanged swing check type (Reflux Valves) Non Return Valves of 100 mm Dia. conforming to IS 5312 (Pts.1 and 2 with amendments upto date, if any) having body, cover, door, bearing holder with D.I., Hinge pipe, Door pin, door suspension pin with stainless steel (IS.6603), body seat ring, door face ring, bearing bushes, plugs for hinge pin with leaded tin bronze (IS.318), bolts, nuts with carbon steel, gaskets with rubber, hinges with cast steel inlcuding cost and conveyance of all materials to work site and loading, unloading, transportation etc., complete as directed by the Departmental Authorities.
1
-
18109.09
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (150 I.D)
140
-
50899.8
... More
Civil Engineering Work;Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M 10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 MORTH
590.48
-
188410.36
... More
Civil Engineering Work;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
64.62
-
16918.81
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.81
-
64708.67
... More
Civil Engineering Work;Filling with Stone Crusher Dust for filling Plot Area and to fill the ditch portions wherever necessary in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental and all labour charges etc., complete for finished item of work as directed by the departmental authorities.
1099.52
-
710949.63
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE TEEs conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
37
-
64821.78
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
2.7
-
11980.01
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR TOP DOME SLAB.
4.8
-
82190.74
... More
Civil Engineering Work;Providing and fixing double acting 50mm Air valve including boring the main, threading the bore and fixing the nipple ect., excluding cost rubber insertion bolts and nuts air valve and flanged tail piecee etc., complete.as directed by the departmental authorities
1
-
423.84
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
870.18
-
104143.14
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., Complete as directed by the Departmental Authorities
5
-
7282.7
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
88.07
-
94385.5
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
19.09
-
14450.18
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
5.43
-
448470.7
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300 2 of MoRT and H, including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities
99.68
-
76392.76
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, correction charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for roof SLAB.
51.95
-
516310.27
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
57.46
-
43494.35
... More
Civil Engineering Work;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub base/base course on a well prepared sub base and compacting with Vibratory Roller 80 100 kN weight to achieve the desired density including Cost and conveyance of all materials, all hire and operational charges of T and P etc., lighting, barricading and maintenance of diversion, etc as per Tables 400.11 and 400.12 and Technical Specification Clause 406 MORD / MORTH. as directed by the Departmental Authorities.
2547.47
-
7334293.5
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
12.54
-
6296.96
... More
Civil Engineering Work;Bore wells Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 8.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
183
-
25989.66
... More
Civil Engineering Work;Labour charges for jointing 200mm Dia. Sluice Valve with flanged ends including cost of joining material such as bolts and nuts, rubber insertion, white lead including filling with water with lead up to 500 meters and testing to required presure complete(Reference to specifications BIS No.3114/94).
4
-
2108.28
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
18.9
-
2261.95
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (250 I.D)
219.41
-
205657.38
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 200mm Dia. Sluice Valve as directed by the Departmental Authorities.
2
-
1098.24
... More
Civil Engineering Work;Supplying and fixing 602 x 602 mm CI man hole frame and cover (light weight) 30 Kgs as directed by the Departmental authorities
8
-
25767.92
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC PLINTH BEAMS.
0.63
-
7858.28
... More
Civil Engineering Work;Labour charges for Lowering and keeping in position of 200 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work.excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
626.69
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
150.92
-
85915.74
... More
Civil Engineering Work;Construction of granular sub base by providing well graded material for grading III spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.(CBR Value Minimum 30) including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as directed by the Departmental Authorities
557.7
-
907076.74
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
1
-
2831.29
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE TEEs conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
22
-
38542.68
... More
Civil Engineering Work;Lowering, Laying and Jointing of 63mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
255
-
9195.3
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
9.45
-
1130.98
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (150 I.D)
140
-
9066.4
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (150 I.D)
470
-
30437.2
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300 2 of MoRT and H, including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities
1816.85
-
1468941.39
... More
Civil Engineering Work;Labour charges for Lowering and keeping in position of 200 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work.excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
2
-
1253.38
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (150 I.D)
455
-
29465.8
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR SIDE WALLS.
13.2
-
218525.87
... More
Civil Engineering Work;Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI marked conforming to IS 1729 1979 of reputed make with cement caulked joints and fixing as per site requirements including painting black with Japan paint and fixing with necessary wooden blocks fixed in the masonry walls in cement mortar (1½ 1) and including fixing of M.S. clamps if necessary with required no. of Bombay nails etc., complete complete for Vent Pipe.as directed by the Departmental authorities
12
-
12570.36
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 160mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
3
-
1080.48
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
313.4
-
37507.71
... More
Civil Engineering Work;Supply and delivery of D.I. Double Flanged swing check type (Reflux Valves) Non Return Valves of 100 mm Dia. conforming to IS 5312 (Pts.1 and 2 with amendments upto date, if any) having body, cover, door, bearing holder with D.I., Hinge pipe, Door pin, door suspension pin with stainless steel (IS.6603), body seat ring, door face ring, bearing bushes, plugs for hinge pin with leaded tin bronze (IS.318), bolts, nuts with carbon steel, gaskets with rubber, hinges with cast steel inlcuding cost and conveyance of all materials to work site and loading, unloading, transportation etc., complete as directed by the Departmental Authorities.
1
-
18109.09
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities Cost of DWC Pipe (200 I.D)
245.93
-
147808.85
... More
Civil Engineering Work;Painting to New wood work with primer and two coats with Synthetic enamel paint in all shades of Grade I aprpoved brand and colour including cost and conveyance of all materials to work site and all operational, incidential and all labour charges such as sand paper, cleaning the surface, cost of brushes etc., complete for finished item of work as directed by the department (Three coats).
1.78
-
363.81
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300 2 of MoRT and H, including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities. for side berms.
521.06
-
233273.35
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
6.4
-
765.95
... More
Civil Engineering Work;Bore wells 180mm dia. Pvc Casing pipe perforation charge
183
-
62586
... More
Civil Engineering Work;Construction of 904m (3' 0 Inch) Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1 3)Prop., 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
12
-
128089.56
... More
Civil Engineering Work;Supplying and fixing of RCC Cover of 22 Inch Dia. of 3 Inch thick with nominal reinforcement as directed by the department and hooks for lifting including cost and conveyance of all materials to work site and operational, incidental and all labour charges for fixing charges etc., complete for finished item of work.
1
-
753.27
... More
Civil Engineering Work;Supply and delivery of D.I. Double Flanged swing check type (Reflux Valves) Non Return Valves of 100 mm Dia. conforming to IS 5312 (Pts.1 and 2 with amendments upto date, if any) having body, cover, door, bearing holder with D.I., Hinge pipe, Door pin, door suspension pin with stainless steel (IS.6603), body seat ring, door face ring, bearing bushes, plugs for hinge pin with leaded tin bronze (IS.318), bolts, nuts with carbon steel, gaskets with rubber, hinges with cast steel inlcuding cost and conveyance of all materials to work site and loading, unloading, transportation etc., complete as directed by the Departmental Authorities.
1
-
18109.09
... More
Civil Engineering Work;Bore wells Geological Survey charges excluding taxes for Plain Area
3
-
3900
... More
Civil Engineering Work;0.60 x 0.90 m Window Providing and Fixing of openable windows made of Pre painted steel (base steel as per IS 513 of 0.58mm thick Galvanized as per IS 277 with zinc of 120 GSM ) primer coated with epoxy primer of 5 7 microns thick. finish painted with a polyester paint of 12 16 microns thick and back coated with 5 7 microns thick alkyd backer and section for outer frame of 48 x 50mm, centre mullion of 48 x 50 mm section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stairless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, including 10mm square guard bars with 6 Inch (152.4mm) pitch etc., complete for finished item of work. (Single shutter window 2'0 Inch x 4'0 Inch (609.6mm x 1219.2mm). Outer frame section size of 48 x 50mm shutter frame section size of 48 x 25mm and as directed by the Departmental Authorities
1
-
3522.84
... More
Civil Engineering Work;RO Plant Supplying and fixing of 32mm N.B. size Gunmetal Gate (G.M.Peet) Valve as per IS.778, Class I of Indian make heavy type including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work as directed by the department.
1
-
1898.51
... More
Civil Engineering Work;Supplying and fixing of 25mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete. for sump railings and inside and outside ladders and as directed by the Departmental authorities
105
-
32209.8
... More
Civil Engineering Work;SSupply and run of 4 of 56/0.3mm (4.00Sq.mm) FR P.V.C. insulated flexible copper cableFRLS/FRLS H/HFFR/ ZHFR PVC insulated 1100V grade as per IS.694/1990 specification for Copper Cable of Category II of make V Guard/Bonton /Finecab/ HPL / Million /Fortune Art / Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser/Beljin /Rhino/ Standard / Vimal etc., including cost of cable, all materials and labour charges for fixing etc., complete as directed by the Department authorities.
50
-
10822.5
... More
Civil Engineering Work;Supply and delivery of Rubber Packing 6mm thick including cost and conveyance of all materials to site of work etc., complete as directed by the Departmental Authorities.
28.8
-
3043.01
... More
Civil Engineering Work;Bore wells Supply and Erection of PANEL MOUNTING 125 A, 4 Pole, 25 KA, MCCB adjustable of make L and T/Schneider/Siemens/Legrand/Hager confirms to IS/IEC 60847 2 having breaking capacity 35/36 KA with Thermal Magnetic setting/ Microprocessor based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the department.
3
-
37152.93
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
2
-
5662.58
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
12.54
-
7152.82
... More
Civil Engineering Work;Supplying and fixing of approved make Automatic Star Delta Starter of make C and S/Crompton /L and T / Siemens/BCH suitable for 3 Phase, 415 V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete and as directed by the Departmental authorities
2
-
36862.38
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
9.45
-
9884.79
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for ROOF SLABS.
1.4
-
18233.46
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 200mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
1
-
639.65
... More
Civil Engineering Work;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
64.62
-
16918.81
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
413.37
-
49472.12
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (250 I.D)
134.76
-
126313.24
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 160mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
4
-
1440.64
... More
Civil Engineering Work;Painting to kerb with approved Synthetic enamel paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost and conveyance of all materials, labour charges etc; complete for finished item of work (APSS No. 912)and as directed by the Department authorities
359.28
-
122780.35
... More
Civil Engineering Work;Construction of 904.0 m (3' 0 Inch)Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1 3)Prop. 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.(FOR Valve Pits) as directed by the Departmental Authorities.
7
-
47479.74
... More
Civil Engineering Work;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Culvert slab.
8.1
-
52877.45
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for WALLS.
137.94
-
1810822.52
... More
Civil Engineering Work;Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI marked conforming to IS 1729 1979 of reputed make with cement caulked joints and fixing as per site requirements including painting black with Japan paint and fixing with necessary wooden blocks fixed in the masonry walls in cement mortar (1½ 1) and including fixing of M.S. clamps if necessary with required no. of Bombay nails etc., complete complete for Vent Pipe.as directed by the Departmental authorities
12
-
12570.36
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 150mm Dia. Sluice Valve as directed by the Departmental Authorities.
1
-
486.44
... More
Civil Engineering Work;Earthwork in excavation as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities for pipe line trench work
1790.19
-
214249.94
... More
Civil Engineering Work;Supply ,delivery and fixing of 50 mm dia Gunmetal gate valve (GM Peet) as per IS 778 Class I Indian make heavy type including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities
14
-
52585.54
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 160mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
10
-
3817.5
... More
Civil Engineering Work;Lowering of 200mm Dia CI/DI Pipes (all classes) and specials (fittings) with flanged ends carefully into trench and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Reference to specifications. BIS No.3114/1994) as directed by the Departmental Authorities.
2000
-
230280
... More
Civil Engineering Work;Supply and delivery of Rubber Packing 6mm thick including cost and conveyance of all materials to site of work etc., complete as directed by the Departmental Authorities.
7.2
-
760.75
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR TOP RING BEAM.
1.94
-
24065.25
... More
Civil Engineering Work;Construction of 904.0 m (3' 0 Inch)Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1 3)Prop. 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.(FOR Valve Pits) as directed by the Departmental Authorities.
7
-
47479.74
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR TOP DOME SLAB.
5.45
-
93730.63
... More
Civil Engineering Work;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Bed Blocks.
37.26
-
243236.26
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (250mm I.D)
225.2
-
211084.46
... More
Civil Engineering Work;Bore wells Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 8.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
305
-
43316.1
... More
Civil Engineering Work;Supply and fixing to Cement JALLIES 40mm thick including cost and conveyance of all materials and water to work site and all operational, incidental charges, fixing, laying and all labour charges, curing etc., complete for finished item of work as directed by the departmental authorities
0.35
-
102.2
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
8.55
-
35728.23
... More
Civil Engineering Work;RO Plant Supplying and laying of CPVC PIPES of 54.00mm OD Pipe SDR 11 and fittings or equal and for Hot and Cold confirming to IS.15778 2007 with malleable specials such as Tees, Elbows, Check nuts, unions, bushes etc., colvent cement including fixing in walls, ceiling floors including cost and conveyance of all materials to site of work and include for necessary excavation in all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making bores in walls ceiling etc., and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the department.
15
-
8623.35
... More
Civil Engineering Work;Plastering 12 mm thick Single coat with C.M. (1 4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete. for Internal and External Walls as directed by the Departmental Authorities.
64.62
-
22042.53
... More
Civil Engineering Work;Supplying and fixing of RCC Cover of 22 Inch Dia. of 3 Inch thick with nominal reinforcement as directed by the department and hooks for lifting including cost and conveyance of all materials to work site and operational, incidental and all labour charges for fixing charges etc., complete for finished item of work.
2
-
1506.54
... More
Civil Engineering Work;Bore wells Supply and run of 4 of 56/0.3mm (4.00Sq.mm) FR P.V.C. insulated flexible copper cableFRLS/FRLS H/HFFR/ ZHFR PVC insulated 1100V grade as per IS.694/1990 specification for Copper Cable of Category II of make V Guard/Bonton /Finecab/ HPL /Million /Fortune Art / Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser/Beljin/ Rhino/ Standard / Vimal etc., including cost of cable, all materials and labour charges for fixing etc., complete as directed by the Department authorities.
585
-
126623.25
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 100mm Dia. (Scour Valve) , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete .(pn 1.0 (MPa) as directed by the Departmental Authorities
1
-
14172.34
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 100mm Dia. (Scour Valve) , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete .(pn 1.0 (MPa) as directed by the Departmental Authorities
1
-
14172.34
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
2.73
-
225474.22
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 200mm Dia. Sluice Valve as directed by the Departmental Authorities.
4
-
2196.48
... More
Civil Engineering Work;Supply and erecting 3 Phase, 10.00 HP ISI make submersible pumpset confirming to IS 14220 1994 of Makes Kirloskar / Crompton / Texmo / CRI / KSB/Lubi /PSG/ AryenVarshaof suitable for erection in open well with water resistant dynamically balanced impeller with stainless steel shaft sleeves, pump coupling and pivot with squirrel cage Induction Motor of 3 phase, 415V, 50Hz.., A.C.Supply, heavy copper windings with water proof insulation and high precision strength not to be effected by chemicals in water with suitable bronze bearings, 10 HP pump erected with necessary H type clamps of suitable size and strength including cost of all materials, Transportation and labour charges etc., complete and as directed by the Departmental authorities
2
-
94831.04
... More
Civil Engineering Work;Earthwork in excavation as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities for pipe line trench work
882.05
-
105563.74
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538Supply and delivery of .D.I. Double Flanged Sluice Valves of 200mm Dia.including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn 1.0 (MPa) as directed by the Departmental Authorities
1
-
28607.12
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for Chajja's.
0.48
-
5758.43
... More
Civil Engineering Work;Bore wells Supply and erecting, ISI mark submersible 5 HP, 3 Phase, 8 stages pumpset suitable for 156mm dia borewell with high quality wear resistance and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of 3 phase 415V, 50Hz.. A.C. power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc., with necessary H type clamp of suitable size and strength.
3
-
139755.3
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
135.14
-
77008.18
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (250 I.D)
313.5
-
293849.82
... More
Civil Engineering Work;Cutting Open B.T. Road surface (as well as asphalt concrete upto 75mm thick) including Water Bound macadam and including cost of all labour and machinery charges and as directed by the Department in charge of work.
5.4
-
560.14
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for LINTELS.
0.07
-
920.37
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Drains walls.
71.97
-
581184.38
... More
Civil Engineering Work;Construction of 904.0 m (3' 0 Inch)Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1 3)Prop. 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
16
-
108525.12
... More
Civil Engineering Work;Providing and laying bituminous macadam with 40 60 TPH hot mix plant producing an average output of 75 tonnes/ 37.50 t per hour using crushed aggregates of grading I premixed with bituminous binder V.G 10(80/100) @3.30 Percentage transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction as per Tech. specification No. 504 MORTH etc., complete as directed by the Departmental authoritites.
204.6
-
1384063.76
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
21.78
-
94383.85
... More
Civil Engineering Work;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
1.27
-
95246.52
... More
Civil Engineering Work;Bore wells Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 350/450 mm hole (for insertion of 160/175/200mm PVC Pipe/175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burled channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebuIlled pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, damps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per 1SI specification used for rotary tube well. The pebbled gravel acking should be carried out in such a way that the theoretical quantity consumed completely. The entire work to be carried out as per I.S. 2800 Part I and II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc.,
183
-
248880
... More
Civil Engineering Work;Supply and placing of the M20 Design Mix Concrete corresponding to IS 456 using CONCRETE MIXER with 20mm and 12.5mm size machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales and other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for,for SIDE WALLS (Wall thickness 0.20 M).
211.55
-
1998466.31
... More
Civil Engineering Work;Bore wells Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 8.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
91.5
-
12994.83
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
12.54
-
7142.28
... More
Civil Engineering Work;Lowering and keeping in position of 100 mm Dia. Scour valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
224.12
... More
Civil Engineering Work;Lowering, Laying and Jointing of 63mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
210
-
7572.6
... More
Civil Engineering Work;Providing and fixing double acting 50mm Air valve including boring the main, threading the bore and fixing the nipple ect., excluding cost rubber insertion bolts and nuts air valve and flanged tail piecee etc., complete.as directed by the departmental authorities
2
-
693.96
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for ROOF SLABS.
1.4
-
18054.81
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR BOTTOM SLAB.
25.98
-
190184.25
... More
Civil Engineering Work;Supplying and fixing of 100mm Dia. B class G.I. Pipe properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for connecting Motor at Sump to Panel Board and as directed by the Departmental authorities
30
-
25972.5
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Culvert bed.
8.55
-
45297.99
... More
Civil Engineering Work;Supplying and fixing 602 x 602 mm CI man hole frame and cover (light weight) 30 Kgs as directed by the Departmental authorities
8
-
25767.92
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for LINTELS.
0.07
-
864.63
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
5125.63
-
613435.4
... More
Civil Engineering Work;Construction of un reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T and P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days as per design and drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities.
371.84
-
2462525.27
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
91.67
-
402819.98
... More
Civil Engineering Work;Supply and delivery of D.I. Double Flanged swing check type (Reflux Valves) Non Return Valves of 100 mm Dia. conforming to IS 5312 (Pts.1 and 2 with amendments upto date, if any) having body, cover, door, bearing holder with D.I., Hinge pipe, Door pin, door suspension pin with stainless steel (IS.6603), body seat ring, door face ring, bearing bushes, plugs for hinge pin with leaded tin bronze (IS.318), bolts, nuts with carbon steel, gaskets with rubber, hinges with cast steel inlcuding cost and conveyance of all materials to work site and loading, unloading, transportation etc., complete as directed by the Departmental Authorities.
1
-
18109.09
... More
Civil Engineering Work;Supply and erecting 3 Phase, 10.00 HP ISI make submersible pumpset confirming to IS 14220 1994 of Makes Kirloskar/Crompton/Texmo/CRI/KSB/Lubi /PSG/ AryenVarshaof suitable for erection in open well with water resistant dynamically balanced impeller with stainless steel shaft sleeves, pump coupling and pivot with squirrel cage Induction Motor of 3 phase, 415V, 50Hz.., A.C.Supply, heavy copper windings with water proof insulation and high precision strength not to be effected by chemicals in water with suitable bronze bearings, 10 HP pump erected with necessary H type clamps of suitable size and strength including cost of all materials, Transportation and labour charges etc., complete and as directed by the Departmental authorities
2
-
96123.98
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc.,complete as directed by the Departmental Authorities.
3
-
1506.54
... More
Civil Engineering Work;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub base/base course on a well prepared sub base and compacting with Vibratory Roller 80 100 kN weight to achieve the desired density including Cost and conveyance of all materials, all hire and operational charges of T and P etc., lighting, barricading and maintenance of diversion, etc as per Tables 400.11 and 400.12 and Technical Specification Clause 406 MORD / MORTH. as directed by the Departmental Authorities.
388.35
-
905368.12
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
5.4
-
23389.88
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
4.95
-
21864.89
... More
Civil Engineering Work;Supply and erecting 3 Phase, 10.00 HP ISI make submersible pumpset confirming to IS 14220 1994 of Makes Kirloskar / Crompton / Texmo / CRI / KSB/Lubi /PSG/ AryenVarshaof suitable for erection in open well with water resistant dynamically balanced impeller with stainless steel shaft sleeves, pump coupling and pivot with squirrel cage Induction Motor of 3 phase, 415V, 50Hz.., A.C.Supply, heavy copper windings with water proof insulation and high precision strength not to be effected by chemicals in water with suitable bronze bearings, 10 HP pump erected with necessary H type clamps of suitable size and strength including cost of all materials, Transportation and labour charges etc., complete and as directed by the Departmental authorities
2
-
96123.98
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE TEEs conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
14
-
24527.16
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
111.89
-
63355.47
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
9.32
-
744549.17
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 150mm Dia. , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn 1.0 (MPa) as directed by the Departmental Authorities
3
-
66137.55
... More
Civil Engineering Work;Lowering, Laying and Jointing of 200mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
350
-
39196.5
... More
Civil Engineering Work;Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M 10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 MORTH
760.88
-
247111
... More
Civil Engineering Work;Supply and delivery of tamper proof D.I., Flanged Single Chamber Air Release Valves of 50mm Dia. with body and cover made of Ductile Iron Grade GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per IS 1865, IS 3896 2 with food grade epoxy powder coating (EP P) (Min 250 Micron) inside and outside of color blue RAL 5005. All internal parts such as float, shell, cove bolts etc., made of austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/ EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination flange drilling as per IS 1538 and including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities.
9
-
115740.72
... More
Civil Engineering Work;Supplying and fixing of RCC Cover of 22 Inch Dia. of 3 Inch thick with nominal reinforcement as directed by the department and hooks for lifting including cost and conveyance of all materials to work site and operational, incidental and all labour charges for fixing charges etc., complete for finished item of work.
2
-
1506.54
... More
Civil Engineering Work;Supplying and fixing of 8? SWG TEE junction of first class including cost and conveyance of all materials, air tight cement joints labour charges etc., complete.as directed by the Departmental authorities
8
-
4299.2
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 100mm Dia. Sluice Valve. as directed by the Departmental Authorities.
2
-
670.02
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Culvert walls.
5.4
-
43934.99
... More
Civil Engineering Work;Construction of 904.0 m (3' 0 Inch)Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1 3)Prop. 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
9
-
61045.38
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 150mm Dia. , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn 1.0 (MPa) as directed by the Departmental Authorities)
2
-
44091.7
... More
Civil Engineering Work;Supply and erecting 3 Phase, 10.00 HP ISI make submersible pumpset confirming to IS 14220 1994 of Makes Kirloskar / Crompton / Texmo / CRI / KSB/Lubi /PSG/ AryenVarshaof suitable for erection in open well with water resistant dynamically balanced impeller with stainless steel shaft sleeves, pump coupling and pivot with squirrel cage Induction Motor of 3 phase, 415V, 50Hz.., A.C.Supply, heavy copper windings with water proof insulation and high precision strength not to be effected by chemicals in water with suitable bronze bearings, 10 HP pump erected with necessary H type clamps of suitable size and strength including cost of all materials, Transportation and labour charges etc., complete and as directed by the Departmental authorities
2
-
96123.98
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities.
0.29
-
23167.3
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR SIDE WALLS.
13.2
-
220923.12
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 150mm Dia. , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn 1.0 (MPa) as directed by the Departmental Authorities
2
-
44091.7
... More
Civil Engineering Work;Bore wells Cost and supply of 180 mm dia.cap.
3
-
945
... More
Civil Engineering Work;Supply and delivery of D.I. Double Flanged swing check type (Reflux Valves) Non Return Valves of 100 mm Dia. conforming to IS 5312 (Pts.1 and 2 with amendments upto date, if any) having body, cover, door, bearing holder with D.I., Hinge pipe, Door pin, door suspension pin with stainless steel (IS.6603), body seat ring, door face ring, bearing bushes, plugs for hinge pin with leaded tin bronze (IS.318), bolts, nuts with carbon steel, gaskets with rubber, hinges with cast steel inlcuding cost and conveyance of all materials to work site and loading, unloading, transportation etc., complete as directed by the Departmental Authorities.
1
-
18109.09
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (200 I.D)
159
-
16981.2
... More
Civil Engineering Work;Cutting open C.C road surface with concrete saw cutter and removal with breaker and including cost of all labour and machinery charges and as directed by the Department in charge of work.
5.4
-
17104.99
... More
Civil Engineering Work;Supply and delivery of tamper proof D.I., Flanged Single Chamber Air Release Valves of 50mm Dia. with body and cover made of Ductile Iron Grade GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per IS 1865, IS 3896 2 with food grade epoxy powder coating (EP P) (Min 250 Micron) inside and outside of color blue RAL 5005. All internal parts such as float, shell, cove bolts etc., made of austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/ EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination flange drilling as per IS 1538 and including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities.
2
-
25720.16
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 200mm Dia. Sluice Valve as directed by the Departmental Authorities.
2
-
1054.14
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Culvert walls.
40.5
-
332098.38
... More
Civil Engineering Work;Plastering 12 mm thick Single coat with C.M. (1 3) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete for finished item of work etc., complete. for Ceiling as directed by the Departmental Authorities.
7.5
-
2977.35
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc.,complete as directed by the Departmental Authorities.
3
-
1506.54
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538Supply and delivery of .D.I. Double Flanged Sluice Valves of 200mm Dia.including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn 1.0 (MPa) as directed by the Departmental Authorities
1
-
28607.12
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Culvert walls.
14.4
-
115669.15
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
259.05
-
291669.58
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (250 I.D)
130
-
121851.6
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC FOOTINGS.
0.49
-
4768.22
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
31.87
-
2632184.41
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC COLUMNS.
0.92
-
12094.9
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for CHAJJAS.
0.95
-
11734.2
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities Cost of DWC Pipe (200 I.D)
719.86
-
432650.26
... More
Civil Engineering Work;Supplying and fixing of 100mm Dia. B class G.I. Pipe properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for connecting Motor at Sump to Panel Board and as directed by the Departmental authorities
30
-
25972.5
... More
Civil Engineering Work;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
54.36
-
14232.54
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
65.16
-
5381648.46
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538Supply and delivery of .D.I. Double Flanged Sluice Valves of 200mm Dia.including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn 1.0 (MPa) as directed by the Departmental Authorities
1
-
28607.12
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities Cost of DWC Pipe (200 I.D)
159
-
95562.18
... More
Civil Engineering Work;Supply and delivery of Rubber Packing 6mm thick including cost and conveyance of all materials to site of work etc., complete as directed by the Departmental Authorities.
9
-
950.94
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
1842.52
-
213400.67
... More
Civil Engineering Work;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities for pipeline bed.
86.56
-
81110.18
... More
Civil Engineering Work;Brick Masonry in C.M.(1 6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
1.35
-
9053.78
... More
Civil Engineering Work;Lowering and keeping in position of 100 mm Dia. Scour valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
224.12
... More
Civil Engineering Work;Supplying and fixing of approved make Automatic Star Delta Starter of make C and S/Crompton/L and T / Siemens/BCH suitable for 3 Phase, 415 V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete and as directed by the Departmental authorities
3
-
55293.57
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Drain bed.
281.95
-
1588238.45
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, correction charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for Raft.
155.52
-
1147686.28
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
9.53
-
41706.14
... More
Civil Engineering Work;Filling with SAND intrenches sides of Foundations and Basements with initial lead in layeing not excuding 15cms thick consolidating each deposited layer by watering and ramming includings cost and conveyanced water to wrok site and all operational, incidental, labour charges, hire charges and T and P etc., complete for finished item of work. as directed by the Departmental Authorities.
174.21
-
232709.72
... More
Civil Engineering Work;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities for pipeline bed.
217.22
-
237119.52
... More
Civil Engineering Work;Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI marked conforming to IS 1729 1979 of reputed make with cement caulked joints and fixing as per site requirements including painting black with Japan paint and fixing with necessary wooden blocks fixed in the masonry walls in cement mortar (1½ 1) and including fixing of M.S. clamps if necessary with required no. of Bombay nails etc., complete complete for Vent Pipe.as directed by the Departmental authorities
12
-
12570.36
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
293.52
-
1226543.76
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 110mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
390.84
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 63mm Dia. HDPE TEES conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading, unloading , forwarding charges, labour charges etc., but excluding Excise duty,Sale Tax and speicals etc.,complete for finished item of work as directed by the Departmental Authorities.
67
-
13016.76
... More
Civil Engineering Work;Supply and delivery of D.I. D/F Specials as per specifications of IS No.,7181/1986, 5531/1988 and 3950/1979 inlcuding cost and conveyance loading unloading etc., complete as directed by the Departmental Authorities.
500
-
67330
... More
Civil Engineering Work;Painting to kerb with approved Synthetic enamel paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost and conveyance of all materials, labour charges etc; complete for finished item of work (APSS No. 912)and as directed by the Department authorities
1390.38
-
431407.11
... More
Civil Engineering Work;Manufacture,supply and delivery of unplasticised 160mm dia PVC pipes for potable water supplies conforming to IS 4985/2000 include of transportation to the sub divisional stores anywhere in AP exculding excise duty and sales tax etc., (4kg/cm2)
42
-
22809.36
... More
Civil Engineering Work;Bore wells Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 8.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
183
-
25989.66
... More
Civil Engineering Work;Construction of 904.0 m (3' 0 Inch)Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1 3)Prop. 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
9
-
61045.38
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
530.53
-
383960.48
... More
Civil Engineering Work;Painting to kerb with approved Synthetic enamel paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost and conveyance of all materials, labour charges etc; complete for finished item of work (APSS No. 912)and as directed by the Department authorities
354.29
-
121075.06
... More
Civil Engineering Work;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
0.93
-
69747.45
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 150mm Dia. Sluice Valve. as directed by the Departmental Authorities.
6
-
3048.12
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.3
-
24777.39
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain bed.
61.49
-
343820.11
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Drain Bed.
33
-
172181.46
... More
Civil Engineering Work;Supply and erecting 3 Phase, 10.00 HP ISI make submersible pumpset confirming to IS 14220 1994 of Makes Kirloskar/Crompton/Texmo/CRI/KSB/Lubi /PSG/ AryenVarshaof suitable for erection in open well with water resistant dynamically balanced impeller with stainless steel shaft sleeves, pump coupling and pivot with squirrel cage Induction Motor of 3 phase, 415V, 50Hz.., A.C.Supply, heavy copper windings with water proof insulation and high precision strength not to be effected by chemicals in water with suitable bronze bearings, 10 HP pump erected with necessary H type clamps of suitable size and strength including cost of all materials, Transportation and labour charges etc., complete and as directed by the Departmental authorities
2
-
96123.98
... More
Civil Engineering Work;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities for pipeline bed.
485.14
-
427350.12
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, correction charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for Raft.
290.16
-
2108424.43
... More
Civil Engineering Work;Earthwork in excavation as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities for pipe line trench work
5681.81
-
679999.02
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC PLINTH BEAMS.
0.63
-
7236.65
... More
Civil Engineering Work;Manufacture as per company?s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company?s standards, loading, transportation, unloading and stacking at site of work etc, complete but excluding taxes such as sales tax, C.E.D and others etc., as applicable.., complete for Septic Tank.as directed by the Departmental authorities
64
-
12070.4
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
1
-
2831.29
... More
Civil Engineering Work;Supply and run of 4 of 56/0.3mm (4.00Sq.mm) FR P.V.C. insulated flexible copper cableFRLS/FRLS H/HFFR/ ZHFR PVC insulated 1100V grade as per IS.694/1990 specification for Copper Cable of Category II of make V Guard/Bonton /Finecab/ HPL / Million /Fortune Art / Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser/Beljin/ Rhino/ Standard / Vimal etc., including cost of cable, all materials and labour charges for fixing etc., complete as directed by the Department authorities.
50
-
10822.5
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
262.2
-
189762.01
... More
Civil Engineering Work;Labour charges for Lowering and keeping in position of 200 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work.excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
2
-
1074.32
... More
Civil Engineering Work;Supplying and fixing of CP Long body bib cock fancy type deluxe heavy duty 12.70mm Dia. Indian make heavy duty of approved make including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work.
3
-
1953
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 160mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
6
-
2290.5
... More
Civil Engineering Work;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities for pipeline bed.
209.11
-
158285.81
... More
Civil Engineering Work;Supply and delivery of D.I. Double Flanged swing check type (Reflux Valves) Non Return Valves of 100 mm Dia. conforming to IS 5312 (Pts.1 and 2 with amendments upto date, if any) having body, cover, door, bearing holder with D.I., Hinge pipe, Door pin, door suspension pin with stainless steel (IS.6603), body seat ring, door face ring, bearing bushes, plugs for hinge pin with leaded tin bronze (IS.318), bolts, nuts with carbon steel, gaskets with rubber, hinges with cast steel inlcuding cost and conveyance of all materials to work site and loading, unloading, transportation etc., complete as directed by the Departmental Authorities.
1
-
18109.09
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE TEEs conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
19
-
33286.86
... More
Civil Engineering Work;Construction of 904.0 m (3' 0 Inch)Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1 3)Prop. 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.(FOR Valve Pits) as directed by the Departmental Authorities.
6
-
40696.92
... More
Civil Engineering Work;Painting to New wood work with primer and two coats with Synthetic enamel paint in all shades of Grade I aprpoved brand and colour including cost and conveyance of all materials to work site and all operational, incidential and all labour charges such as sand paper, cleaning the surface, cost of brushes etc., complete for finished item of work as directed by the department (Three coats).
1.78
-
363.81
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 200mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
1392.92
... More
Civil Engineering Work;Supplying and fixing of 100mm Dia. B class G.I. Pipe properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for connecting Motor at Sump to Panel Board and as directed by the Departmental authorities
30
-
25972.5
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
528
-
59991.36
... More
Civil Engineering Work;Bore wells 180mm dia. Pvc Casing pipe perforation charge
183
-
62586
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., Complete as directed by the Departmental Authorities
5
-
7282.7
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (250 I.D)
184.5
-
30813.35
... More
Civil Engineering Work;Lowering and keeping in position of 200 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work as directed by the Departmental Authorities.
2
-
1074.32
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm x 200mm Dia. HDPE Reducers conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
4
-
6094.32
... More
Civil Engineering Work;Manufacture,supply and delivery of unplasticised 160mm dia PVC pipes for potable water supplies conforming to IS 4985/2000 include of transportation to the sub divisional stores anywhere in AP exculding excise duty and sales tax etc., (4kg/cm2)
43.75
-
23759.75
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Drains walls.
299.55
-
2359797.99
... More
Civil Engineering Work;RO Plant Supply, Delivery, Erection and Commissioning of RO based Drinking water plant 500LPH. which consist of the followings 1. RAW WATER TRANSFER PUMP Quantity required One No. Material of construction CI. Capacity 1.5 m3/hr at 2.5kg/cm2, head 25 m. Make of material Kirloskar/ CRI/Eqvt. 2. MULTI GRADE FILTER Numbers required One No. Normal operating flow rate 1.0m3/hr Size of unit Dia × Ht. mm 12?×48? ,Material of construction FRP,Normal operating pressure 3.0kg /cm2,Tested Pressure 11.0 kg/cm2,Max. pressure drop 0.5kg/cm2 ,Flow control Top mounted multi port valve ,Media Graded silex and sand,Make Waterlife/Pentair ,3. ACTIVATED CARBON FILTER Numbers required One No. Normal operating flow rate 1.0m3/hr ,Size of unit dia × Ht. mm 12×48 ,Material of construction FRP ,Normal operating pressure 2.5 kg/cm2,Max. Pressure Drop 0.5 kg/cm2 Flow control Top mounted multi port valve ,Media Activated Carbon ,Activated Carbon Make VBD/Eqvt. Make Waterlife/Pentair,4. ANTISCALANT DOSING SYSTEM No. required One No. ,Type Diaphragm type electronic pump Capacity 0 5 LPH Make E dose / HITECH 5.MICRON FILTER Quantity required Two No. Type Disposable cartridge Operating flow rate 1.0 m3/hr ,Operating pressure 2.5 kg/cm2,Micron rating 5 micron ,Type of cartridge PP Wound ,MoC Polycarbonate. 6. HIGH PRESSURE PUMP Quantity required One No. Operating flow rate 1.5 m3/hr ,Operating pressure 12 14 kg/cm 2 ,Make of pump Sumo/CRI/Eqvt. Type of drive Single phase, 230 V, 50 Hz 2900 rpm. 7. RO MENBRANE HOUSING Quantity required TWO No. Material of pressure tube FRP 4040 Element capacity 02 No. Max. working pressure 300 psi Make Waterlife 8. RO MENBRANE Quantity required Two No. Dimensions Dia 4?, Length?40? ,Working pressure 180 psi Element Spiral wound Membrane. Make /HITECH /Eqvt. Pore size of semi permeable membrane 0.0001 micron diameters. 9. ELECTRICAL CONTROL PANEL ,Quantity required One no. Material of construction SS with powder coating, skid mount. Electrical components make L and T/Siemens/Havell?s. 10.U.V System.11.Ozen nessed.Instruments 1.pressure gauges(0.7kg/cm2) 02 nos 100mm dia,L/AEqvt (0 15kg/cm2) 02 Nos. 65mm dia, L/AEqvt.2. Flow meters 02 Nos. (One reject and One Permeate) 3.Pressure limiting Switches 02 Nos. line mounted adjustable. 4. Conductivity meter panel mounted online, Digital.
1
-
125000
... More
Civil Engineering Work;Manufacture as per company?s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company?s standards, loading, transportation, unloading and stacking at site of work etc, complete but excluding taxes such as sales tax, C.E.D and others etc., as applicable.., complete for Septic Tank.as directed by the Departmental authorities
64
-
12070.4
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 200mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
1392.92
... More
Civil Engineering Work;Supplying and fixing of RCC Cover of 22 Inch Dia. of 3 Inch thick with nominal reinforcement as directed by the department and hooks for lifting including cost and conveyance of all materials to work site and operational, incidental and all labour charges for fixing charges etc., complete for finished item of work.
2
-
1506.54
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain bed.
47.17
-
259599.15
... More
Civil Engineering Work;Bore wells 180mm dia. Pvc Casing pipe perforation charge
183
-
62586
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (150 I.D)
370
-
23961.2
... More
Civil Engineering Work;Supply and fixing to Cement JALLIES 40mm thick including cost and conveyance of all materials and water to work site and all operational, incidental charges, fixing, laying and all labour charges, curing etc., complete for finished item of work as directed by the departmental authorities
0.35
-
102.2
... More
Civil Engineering Work;Providing Independent Earthing from Main switch Board for earth continuity with No.8, G.I wire including excavation of earth in all soils upto 5' 6'' depth below ground level of section 5'x2'x3' duly providing 40mm Dia G.I Pipe of 2mts, length using GI bolts and nuts and fixing earth wire including supply and fixing 1' 6'' dia 0' 8'' depth hume pipe ring and refilling the pit with 40 Kgs hard coke, 20Kgs salt and excavated earth including all labour charges etc., complete for finished item of work and as directed by the Departmental authorities
1
-
4302.43
... More
Civil Engineering Work;Bore wells Cost and supply of 180 mm dia.cap.
5
-
1575
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 150mm Dia. Sluice Valve. as directed by the Departmental Authorities.
8
-
4064.16
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
1400
-
162148
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm x 200mm Dia. HDPE Reducers conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
4
-
6094.32
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300 2 of MoRT and H, including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities
727.45
-
588150.6
... More
Civil Engineering Work;Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M 10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 MORTH
2090.4
-
639641.5
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
70.75
-
62322.26
... More
Civil Engineering Work;Supply and delivery of Bolts and Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values as directed by departmental authorities.
17
-
2143.87
... More
Civil Engineering Work;Jointing for 200mm Dia CI/DI pipes and fittings with rubber gasket (push on joint), excluding the cost of the gasket but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 as directed by the Departmental Authorities.
333
-
93782.79
... More
Civil Engineering Work;Plastering 12 mm thick Single coat with C.M. (1 3) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete for finished item of work etc., complete. for Ceiling as directed by the Departmental Authorities.
7.5
-
3000.6
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 150mm Dia. Sluice Valve. as directed by the Departmental Authorities.
6
-
3048.12
... More
Civil Engineering Work;Painting to kerb with approved Synthetic enamel paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost and conveyance of all materials, labour charges etc; complete for finished item of work (APSS No. 912)and as directed by the Department authorities
456.53
-
156014.56
... More
Civil Engineering Work;Bore wells Supply and erecting, ISI mark submersible 5 HP, 3 Phase, 8 stages pumpset suitable for 156mm dia borewell with high quality wear resistance and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of 3 phase 415V, 50Hz.. A.C. power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc., with necessary H type clamp of suitable size and strength.
3
-
139755.3
... More
Civil Engineering Work;Plastering 12 mm thick Single coat with C.M. (1 3) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete for finished item of work etc., complete. for Ceiling as directed by the Departmental Authorities.
7.5
-
2982.83
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for LINTELS.
0.07
-
844.58
... More
Civil Engineering Work;Manufacture,supply and delivery of 200 mm DI K7 Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS. 8329/2000 in standard working lengths of 4, 5, 5.5 and 6 meter for classification K7 suitable for push on joint (rubber gasket jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex factory, including transportation,.to site of work loading and unloading and stacking at site as directed by dept.authorities.
4800
-
10107552
... More
Civil Engineering Work;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
66.41
-
17387.47
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
12
-
53530.92
... More
Civil Engineering Work;Providing and fixing double acting 50mm Air valve including boring the main, threading the bore and fixing the nipple ect., excluding cost rubber insertion bolts and nuts air valve and flanged tail piecee etc., complete.as directed by the departmental authorities
1
-
423.84
... More
Civil Engineering Work;Supplying and fixing of approved make Automatic Star Delta Starter of make C and S/Crompton/L and T / Siemens/BCH suitable for 3 Phase, 415 V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete and as directed by the Departmental authorities
2
-
36862.36
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 150mm Dia. , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn 1.0 (MPa) as directed by the Departmental Authorities
3
-
66137.55
... More
Civil Engineering Work;Earthwork in excavation as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities for pipe line trench work
1244.68
-
148963.3
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (200 I.D)
195.05
-
20831.34
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR SIDE WALLS.
16.1
-
269174.61
... More
Civil Engineering Work;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
3.09
-
223386.05
... More
Civil Engineering Work;Painting to New wood work with primer and two coats with Synthetic enamel paint in all shades of Grade I aprpoved brand and colour including cost and conveyance of all materials to work site and all operational, incidential and all labour charges such as sand paper, cleaning the surface, cost of brushes etc., complete for finished item of work as directed by the department (Three coats).
1.78
-
363.81
... More
Civil Engineering Work;Supplying and fixing of approved make Automatic Star Delta Starter of make C and S/Crompton/L and T / Siemens/BCH suitable for 3 Phase, 415 V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete and as directed by the Departmental authorities
2
-
36862.38
... More
Civil Engineering Work;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub base/base course on a well prepared sub base and compacting with Vibratory Roller 80 100 kN weight to achieve the desired density including Cost and conveyance of all materials, all hire and operational charges of T and P etc., lighting, barricading and maintenance of diversion, etc as per Tables 400.11 and 400.12 and Technical Specification Clause 406 MORD / MORTH. as directed by the Departmental Authorities.
566.13
-
1376714.93
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC FOOTINGS.
2.02
-
18665.77
... More
Civil Engineering Work;Bore wells Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 8.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
183
-
25989.66
... More
Civil Engineering Work;RCC M 20 Design mix (Cement fine aggregate coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing,centering and shuttering etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and as directed by the Departmental authorities for precast slab for drain.
114.15
-
711185.32
... More
Civil Engineering Work;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities for pipeline bed.
104.85
-
108326.83
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
1880.21
-
217765.92
... More
Civil Engineering Work;Supply and delivery of Rubber Packing 6mm thick including cost and conveyance of all materials to site of work etc., complete as directed by the Departmental Authorities.
8.1
-
855.85
... More
Civil Engineering Work;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
54.36
-
14232.54
... More
Civil Engineering Work;Brick Masonry in C.M.(1 6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
7.4
-
49445.54
... More
Civil Engineering Work;Supply and delivery of Bolts and Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values as directed by departmental authorities.
12
-
1513.32
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 100mm Dia. Scour Valve. as directed by the Departmental Authorities.
2
-
670.02
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for LINTELS.
0.07
-
922.91
... More
Civil Engineering Work;Lowering and keeping in position of 150 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
2
-
759.74
... More
Civil Engineering Work;Lowering of 200 MM dia C.I. / D.I. Pipes (all classes) and specials (fittings) with S/S ends carefully into trench and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Reference to specifications. BIS No.3114/1994) complete as directed by the Departmental Authorities.
4800
-
552672
... More
Civil Engineering Work;Supplying and fixing of CP Long body bib cock fancy type deluxe heavy duty 12.70mm Dia. Indian make heavy duty of approved make including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work.
3
-
1953
... More
Civil Engineering Work;Manufacture,supply and delivery of unplasticised 160mm dia PVC pipes for potable water supplies conforming to IS 4985/2000 include of transportation to the sub divisional stores anywhere in AP exculding excise duty and sales tax etc., (4kg/cm2)
35
-
19007.8
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC PLINTH BEAMS.
0.63
-
7905.12
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
27.49
-
29461.31
... More
Civil Engineering Work;RO Plant Supplying and laying of CPVC PIPES of 54.00mm OD Pipe SDR 11 and fittings or equal and for Hot and Cold confirming to IS.15778 2007 with malleable specials such as Tees, Elbows, Check nuts, unions, bushes etc., colvent cement including fixing in walls, ceiling floors including cost and conveyance of all materials to site of work and include for necessary excavation in all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making bores in walls ceiling etc., and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the department.
15
-
8623.35
... More
Civil Engineering Work;Supply and delivery of Bolts and Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values as directed by departmental authorities.
10
-
1261.1
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
61.86
-
270717.92
... More
Civil Engineering Work;Lowering, Laying and Jointing of 63mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
444
-
16010.64
... More
Civil Engineering Work;Supply and delivery of tamper proof D.I., Flanged Single Chamber Air Release Valves of 50mm Dia. with body and cover made of Ductile Iron Grade GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per IS 1865, IS 3896 2 with food grade epoxy powder coating (EP P) (Min 250 Micron) inside and outside of color blue RAL 5005. All internal parts such as float, shell, cove bolts etc., made of austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/ EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination flange drilling as per IS 1538 and including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities.
2
-
25720.16
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
2
-
5662.58
... More
Civil Engineering Work;Painting to kerb with approved Synthetic enamel paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost and conveyance of all materials, labour charges etc; complete for finished item of work (APSS No. 912)and as directed by the Department authorities
719.1
-
245745.23
... More
Civil Engineering Work;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
64.62
-
16918.81
... More
Civil Engineering Work;Bore wells Supply and erecting, ISI mark submersible 5 HP, 3 Phase, 8 stages pumpset suitable for 156mm dia borewell with high quality wear resistance and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of 3 phase 415V, 50Hz.. A.C. power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc., with necessary H type clamp of suitable size and strength.
3
-
139755.3
... More
Civil Engineering Work;Supply and erecting 3 Phase, 10.00 HP ISI make submersible pumpset confirming to IS 14220 1994 of Makes Kirloskar/Crompton/Texmo/CRI/KSB/Lubi /PSG/ AryenVarshaof suitable for erection in open well with water resistant dynamically balanced impeller with stainless steel shaft sleeves, pump coupling and pivot with squirrel cage Induction Motor of 3 phase, 415V, 50Hz.., A.C.Supply, heavy copper windings with water proof insulation and high precision strength not to be effected by chemicals in water with suitable bronze bearings, 10 HP pump erected with necessary H type clamps of suitable size and strength including cost of all materials, Transportation and labour charges etc., complete and as directed by the Departmental authorities
2
-
96123.98
... More
Civil Engineering Work;Bore wells Cost and supply of 180 mm dia.cap.
3
-
945
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 200mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
8
-
5571.68
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for WALLS.
161.31
-
2150331.66
... More
Civil Engineering Work;Filling with SAND intrenches sides of Foundations and Basements with initial lead in layeing not excuding 15cms thick consolidating each deposited layer by watering and ramming includings cost and conveyanced water to wrok site and all operational, incidental, labour charges, hire charges and T and P etc., complete for finished item of work. as directed by the Departmental Authorities.
1848
-
2468558.4
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 150mm Dia. , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn 1.0 (MPa) as directed by the Departmental Authorities
3
-
66137.55
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
249.7
-
29884.1
... More
Civil Engineering Work;Filling with Local available Earth with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering including cost and conveyance all materials and water to work site and all operational charges, incidental charges and all labour charges, hire charges, complete for finished item of work and as directed by the departmental authorities.
1669.07
-
380464.51
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
285
-
32381.7
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
61.86
-
58324.7
... More
Civil Engineering Work;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Culvert slab.
9.07
-
60371.73
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for ROOF SLABS.
1.4
-
16819.54
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (150 I.D)
370
-
134520.9
... More
Civil Engineering Work;Supply and delivery of D.I. Double Flanged swing check type (Reflux Valves) Non Return Valves of 100 mm Dia. conforming to IS 5312 (Pts.1 and 2 with amendments upto date, if any) having body, cover, door, bearing holder with D.I., Hinge pipe, Door pin, door suspension pin with stainless steel (IS.6603), body seat ring, door face ring, bearing bushes, plugs for hinge pin with leaded tin bronze (IS.318), bolts, nuts with carbon steel, gaskets with rubber, hinges with cast steel inlcuding cost and conveyance of all materials to work site and loading, unloading, transportation etc., complete as directed by the Departmental Authorities.
1
-
18109.09
... More
Civil Engineering Work;Supplying and fixing of approved make Semi Automatic Star Delta Starter fitted in CRCA sheet enclosure suitable for 3 Phase, 415 V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete.
3
-
55293.57
... More
Civil Engineering Work;Supply and run of 4 of 56/0.3mm (4.00Sq.mm) FR P.V.C. insulated flexible copper cableFRLS/FRLS H/HFFR/ ZHFR PVC insulated 1100V grade as per IS.694/1990 specification for Copper Cable of Category II of make V Guard/Bonton /Finecab/ HPL /Million/Fortune Art/ Sudhakar/Orbit/TamraAnchor/Plaza/Vihan/Ollvin/Laser/Beljin/ Rhino/ Standard / Vimal etc., including cost of cable, all materials and labour charges for fixing etc., complete as directed by the Department authorities.
50
-
10822.5
... More
Civil Engineering Work;Brick Masonry in C.M.(1 6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
7.4
-
49481.36
... More
Civil Engineering Work;Plastering 12 mm thick Single coat with C.M. (1 3) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete for finished item of work etc., complete. for Ceiling as directed by the Departmental Authorities.
7.5
-
2633.03
... More
Civil Engineering Work;Filling with Local available Earth with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering including cost and conveyance all materials and water to work site and all operational charges, incidental charges and all labour charges, hire charges, complete for finished item of work and as directed by the departmental authorities.
41892.23
-
9305939.97
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Culvert bed.
5.4
-
29718.79
... More
Civil Engineering Work;Providing and fixing double acting 50mm Air valve including boring the main, threading the bore and fixing the nipple ect., excluding cost rubber insertion bolts and nuts air valve and flanged tail piecee etc., complete.as directed by the departmental authorities
2
-
693.96
... More
Civil Engineering Work;Lowering and keeping in position of 100 mm Dia. Scour valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
224.12
... More
Civil Engineering Work;Lowering, Laying and Jointing of 200mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
205.1
-
22969.15
... More
Civil Engineering Work;Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M 10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 MORTH
1198.5
-
385713.26
... More
Civil Engineering Work;Supply and erecting 3 Phase, 10.00 HP ISI make submersible pumpset confirming to IS 14220 1994 of Makes Kirloskar / Crompton / Texmo / CRI / KSB/Lubi /PSG/ AryenVarshaof suitable for erection in open well with water resistant dynamically balanced impeller with stainless steel shaft sleeves, pump coupling and pivot with squirrel cage Induction Motor of 3 phase, 415V, 50Hz.., A.C.Supply, heavy copper windings with water proof insulation and high precision strength not to be effected by chemicals in water with suitable bronze bearings, 10 HP pump erected with necessary H type clamps of suitable size and strength including cost of all materials, Transportation and labour charges etc., complete and as directed by the Departmental authorities
2
-
96123.98
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc.,complete as directed by the Departmental Authorities.
3
-
1506.54
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
2267.54
-
1281658.96
... More
Civil Engineering Work;Bore wells Cost and supply of 175 mm dia. PVC blue threaded casing pipe(CM) including transportation to the work site.
183
-
211365
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
1.65
-
7426.47
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Culvert bed.
5.4
-
29466.94
... More
Civil Engineering Work;Supplying and fixing 602 x 602 mm CI man hole frame and cover (light weight) 30 Kgs as directed by the Departmental authorities
8
-
25767.92
... More
Civil Engineering Work;Construction of un reinforced, design mix M 30 grade cement concrete pavement, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixer laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T and P etc., curing of concrete slabs for 14 days as per Design and drawing and Technical Specification Clause 1501 MORD.(As per APDSS and as directed by the Departmental Authorities) for Block Approaches.
187.2
-
1148348.45
... More
Civil Engineering Work;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub base/base course on a well prepared sub base and compacting with Vibratory Roller 80 100 kN weight to achieve the desired density including Cost and conveyance of all materials, all hire and operational charges of T and P etc., lighting, barricading and maintenance of diversion, etc as per Tables 400.11 and 400.12 and Technical Specification Clause 406 MORD / MORTH. as directed by the Departmental Authorities.
405.44
-
959680.53
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 100mm Dia. (Scour Valve) , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete .(pn 1.0 (MPa) as directed by the Departmental Authorities
1
-
14172.34
... More
Civil Engineering Work;Brick Masonry in C.M.(1 6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
7.4
-
46286.93
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR TOP RING BEAM.
1.94
-
23712.95
... More
Civil Engineering Work;Construction of granular sub base by providing well graded material for grading III spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.(CBR Value Minimum 30) including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as directed by the Departmental Authorities
317.43
-
475386.34
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 100mm Dia. (Scour Valve) , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete .(pn 1.0 (MPa) as directed by the Departmental Authorities
2
-
28344.68
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
444
-
50447.28
... More
Civil Engineering Work;Lowering and keeping in position of 150 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
3
-
1139.61
... More
Civil Engineering Work;Lowering, Laying and Jointing of 160mm Dia. HDPE Pipes by butt fusion welding as per IS 7634/Part II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc.,complete for finished item of work as directed by the Departmental Authorities.
510.45
-
35032.18
... More
Civil Engineering Work;Painting to kerb with approved Synthetic enamel paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost and conveyance of all materials, labour charges etc; complete for finished item of work (APSS No. 912)and as directed by the Department authorities
444.6
-
151937.6
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
111.89
-
63507.65
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
4.53
-
374138.54
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for ROOF BEAMS.
0.63
-
7589.01
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities Cost of DWC Pipe (200 I.D)
591.68
-
355611.51
... More
Civil Engineering Work;Painting to New wood work with primer and two coats with Synthetic enamel paint in all shades of Grade I aprpoved brand and colour including cost and conveyance of all materials to work site and all operational, incidential and all labour charges such as sand paper, cleaning the surface, cost of brushes etc., complete for finished item of work as directed by the department (Three coats).
1.78
-
363.81
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for ROOF SLABS.
1.4
-
18284.28
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (150 I.D)
140
-
9066.4
... More
Civil Engineering Work;Bore wells Cost and supply of 180 mm dia.cap.
3
-
945
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
315
-
35790.3
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Culvert bed.
6.3
-
35226.32
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
1110.81
-
132941.74
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
7.2
-
31201.27
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
6.4
-
765.95
... More
Civil Engineering Work;Lowering and keeping in position of 100mm Dia. Non Return Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work as directed by the Departmental Authorities.
2
-
384.22
... More
Civil Engineering Work;Manufacture as per company?s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company?s standards, loading, transportation, unloading and stacking at site of work etc, complete but excluding taxes such as sales tax, C.E.D and others etc., as applicable.., complete for Septic Tank.as directed by the Departmental authorities
64
-
12070.4
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR TOP RING BEAM.
1.94
-
23960.51
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
24.05
-
25156.54
... More
Civil Engineering Work;Construction of un reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T and P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days as per design and drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities.
368.99
-
2356931
... More
Civil Engineering Work;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub base/base course on a well prepared sub base and compacting with Vibratory Roller 80 100 kN weight to achieve the desired density including Cost and conveyance of all materials, all hire and operational charges of T and P etc., lighting, barricading and maintenance of diversion, etc as per Tables 400.11 and 400.12 and Technical Specification Clause 406 MORD / MORTH. as directed by the Departmental Authorities.
409.13
-
1028057.77
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Drain bed.
178.1
-
929258.12
... More
Civil Engineering Work;Lowering and keeping in position of 100 mm Dia. Scour valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
192.11
... More
Civil Engineering Work;RCC M 20 Design mix (Cement fine aggregate coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing,centering and shuttering etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and as directed by the Departmental authorities for precast slab for drain.
59.23
-
395500.63
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 200mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
4
-
2785.84
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
125.5
-
141302.96
... More
Civil Engineering Work;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub base/base course on a well prepared sub base and compacting with Vibratory Roller 80 100 kN weight to achieve the desired density including Cost and conveyance of all materials, all hire and operational charges of T and P etc., lighting, barricading and maintenance of diversion, etc as per Tables 400.11 and 400.12 and Technical Specification Clause 406 MORD / MORTH. as directed by the Departmental Authorities.
315.1
-
786675.51
... More
Civil Engineering Work;Bore wells Cost and supply of 180 mm dia.cap.
3
-
945
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
211.6
-
73325.75
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
220.95
-
26443.3
... More
Civil Engineering Work;Supplying and fixing of 8? SWG TEE junction of first class including cost and conveyance of all materials, air tight cement joints labour charges etc., complete.as directed by the Departmental authorities
8
-
4299.2
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
4.05
-
17142.6
... More
Civil Engineering Work;Manufacture,supply and delivery of unplasticised 160mm dia PVC pipes for potable water supplies conforming to IS 4985/2000 include of transportation to the sub divisional stores anywhere in AP exculding excise duty and sales tax etc., (4kg/cm2)
210
-
114046.8
... More
Civil Engineering Work;Supply ,delivery and fixing of 50 mm dia Gunmetal gate valve (GM Peet) as per IS 778 Class I Indian make heavy type including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities
22
-
82634.42
... More
Civil Engineering Work;Brick Masonry in C.M.(1 6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
7.4
-
49529.01
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
66.22
-
293820.79
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Culvert bed.
4.05
-
22364.67
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 100mm Dia. Scour Valve. as directed by the Departmental Authorities.
2
-
670.02
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.3
-
24777.39
... More
Civil Engineering Work;Bore wells Supply and Erection of PANEL MOUNTING 125 A, 4 Pole, 25 KA, MCCB adjustable of make L and T/Schneider/Siemens/Legrand/Hager confirms to IS/IEC 60847 2 having breaking capacity 35/36 KA with Thermal Magnetic setting/ Microprocessor based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the department.
3
-
37152.93
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 160mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
720.32
... More
Civil Engineering Work;Supply and fixing to Cement JALLIES 40mm thick including cost and conveyance of all materials and water to work site and all operational, incidental charges, fixing, laying and all labour charges, curing etc., complete for finished item of work as directed by the departmental authorities
0.35
-
102.2
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 200mm Dia. Sluice Valve as directed by the Departmental Authorities.
2
-
1098.24
... More
Civil Engineering Work;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Culvert slab.
12.1
-
80339.28
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
9.53
-
42284.99
... More
Civil Engineering Work;Supplying and fixing of 8? SWG TEE junction of first class including cost and conveyance of all materials, air tight cement joints labour charges etc., complete.as directed by the Departmental authorities
8
-
4299.2
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
411.79
-
49283.03
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
9.56
-
763722.11
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
205.1
-
230926.19
... More
Civil Engineering Work;Lowering and keeping in position of 100 mm Dia. SCOUR VALVE including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work as directed by the Departmental Authorities.
1
-
192.11
... More
Civil Engineering Work;Lowering and keeping in position of 100 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
224.12
... More
Civil Engineering Work;Construction of 904m (3' 0 Inch) Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1 3)Prop., 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
7
-
74718.91
... More
Civil Engineering Work;Supply and run of 4 of 56/0.3mm (4.00Sq.mm) FR P.V.C. insulated flexible copper cableFRLS/FRLS H/HFFR/ ZHFR PVC insulated 1100V grade as per IS.694/1990 specification for Copper Cable of Category II of make V Guard/Bonton /Finecab/ HPL /Million/Fortune Art /Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser/Beljin/ Rhino/ Standard / Vimal etc., including cost of cable, all materials and labour charges for fixing etc., complete as directed by the Department authorities.
50
-
10508.5
... More
Civil Engineering Work;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Culvert slab.
19.15
-
119309.67
... More
Civil Engineering Work;Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M 10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 MORTH
3276
-
1090416.6
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for ROOF SLABS.
1.4
-
18180.2
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities Cost of DWC Pipe (200 I.D)
195.05
-
117228.95
... More
Civil Engineering Work;Construction of 904.0 m (3' 0 Inch)Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1 3)Prop. 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
8
-
54262.56
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
2.37
-
195741.36
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
510.45
-
369427.98
... More
Civil Engineering Work;Supply and delivery of Rubber Packing 6mm thick including cost and conveyance of all materials to site of work etc., complete as directed by the Departmental Authorities.
5.4
-
570.56
... More
Civil Engineering Work;RO Plant Supplying and fixing of 32mm N.B. size Gunmetal Gate (G.M.Peet) Valve as per IS.778, Class I of Indian make heavy type including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work as directed by the department.
1
-
1898.51
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.54
-
44599.3
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 200mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
6
-
3837.9
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
109.01
-
116827.11
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
139.66
-
616899.17
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 100mm Dia. Scour Valve. as directed by the Departmental Authorities.
2
-
670.02
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
281.95
-
1269025.94
... More
Civil Engineering Work;Construction of 904m (3' 0 Inch) Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1 3)Prop., 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
12
-
128089.56
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC FOOTINGS.
0.49
-
4758.24
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC PLINTH BEAMS.
0.63
-
7857.13
... More
Civil Engineering Work;RO Plant Supplying and laying of CPVC PIPES of 34.9mm OD Pipe SDR 11 and fittings or equal and for Hot and Cold confirming to IS.15778 2007 with malleable specials such as Tees, Elbows, Check nuts, unions, bushes etc., colvent cement including fixing in walls, ceiling floors including cost and conveyance of all materials to site of work and include for necessary excavation in all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making bores in walls ceiling etc., and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the department.
3
-
818.01
... More
Civil Engineering Work;RO Plant Supply, Delivery, Erection and Commissioning of RO based Drinking water plant 500LPH. which consist of the followings 1. RAW WATER TRANSFER PUMP Quantity required One No. Material of construction CI. Capacity 1.5 m3/hr at 2.5kg/cm2, head 25 m. Make of material Kirloskar/ CRI/Eqvt. 2. MULTI GRADE FILTER Numbers required One No. Normal operating flow rate 1.0m3/hr Size of unit Dia × Ht. mm 12?×48? ,Material of construction FRP,Normal operating pressure 3.0kg /cm2,Tested Pressure 11.0 kg/cm2,Max. pressure drop 0.5kg/cm2 ,Flow control Top mounted multi port valve ,Media Graded silex and sand,Make Waterlife/Pentair ,3. ACTIVATED CARBON FILTER Numbers required One No. Normal operating flow rate 1.0m3/hr ,Size of unit dia × Ht. mm 12×48 ,Material of construction FRP ,Normal operating pressure 2.5 kg/cm2,Max. Pressure Drop 0.5 kg/cm2 Flow control Top mounted multi port valve ,Media Activated Carbon ,Activated Carbon Make VBD/Eqvt. Make Waterlife/Pentair,4. ANTISCALANT DOSING SYSTEM No. required One No. ,Type Diaphragm type electronic pump Capacity 0 5 LPH Make E dose / HITECH 5.MICRON FILTER Quantity required Two No. Type Disposable cartridge Operating flow rate 1.0 m3/hr ,Operating pressure 2.5 kg/cm2,Micron rating 5 micron ,Type of cartridge PP Wound ,MoC Polycarbonate. 6. HIGH PRESSURE PUMP Quantity required One No. Operating flow rate 1.5 m3/hr ,Operating pressure 12 14 kg/cm 2 ,Make of pump Sumo/CRI/Eqvt. Type of drive Single phase, 230 V, 50 Hz 2900 rpm. 7. RO MENBRANE HOUSING Quantity required TWO No. Material of pressure tube FRP 4040 Element capacity 02 No. Max. working pressure 300 psi Make Waterlife 8. RO MENBRANE Quantity required Two No. Dimensions Dia 4?, Length?40? ,Working pressure 180 psi Element Spiral wound Membrane. Make /HITECH /Eqvt. Pore size of semi permeable membrane 0.0001 micron diameters. 9. ELECTRICAL CONTROL PANEL ,Quantity required One no. Material of construction SS with powder coating, skid mount. Electrical components make L and T/Siemens/Havell?s. 10.U.V System.11.Ozen nessed.Instruments 1.pressure gauges(0.7kg/cm2) 02 nos 100mm dia,L/AEqvt (0 15kg/cm2) 02 Nos. 65mm dia, L/AEqvt.2. Flow meters 02 Nos. (One reject and One Permeate) 3.Pressure limiting Switches 02 Nos. line mounted adjustable. 4. Conductivity meter panel mounted online, Digital.
1
-
125000
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 63mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
152.24
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for ROOF BEAMS.
0.63
-
7660.35
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR BOTTOM SLAB.
22.63
-
167001.93
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
7.75
-
8106.58
... More
Civil Engineering Work;Bore wells Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 350/450 mm hole (for insertion of 160/175/200mm PVC Pipe/175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burled channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebuIlled pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, damps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per 1SI specification used for rotary tube well. The pebbled gravel acking should be carried out in such a way that the theoretical quantity consumed completely. The entire work to be carried out as per I.S. 2800 Part I and II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc.,
91.5
-
124440
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain bed.
101.86
-
564911.49
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538Supply and delivery of .D.I. Double Flanged Sluice Valves of 200mm Dia.including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn 1.0 (MPa) as directed by the Departmental Authorities
2
-
57214.24
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
1.11
-
91676.33
... More
Civil Engineering Work;Supply and Erection of PANEL MOUNTING 125 A, 4 Pole, 25 KA, MCCB adjustable of make L and T/Schneider/Siemens/Legrand/Hager confirms to IS/IEC 60847 2 having breaking capacity 35/36 KA with Thermal Magnetic setting/ Microprocessor based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental Authorities.
2
-
24768.62
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 160mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
5
-
1800.8
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 160mm Dia. HDPE TEES conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding Excise duty,Sale Tax and speicals etc.,complete for finished item of work as directed by the Departmental Authorities.
1
-
1751.94
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
371.8
-
44497.02
... More
Civil Engineering Work;Supply and run of 4 of 56/0.3mm (4.00Sq.mm) FR P.V.C. insulated flexible copper cableFRLS/FRLS H/HFFR/ ZHFR PVC insulated 1100V grade as per IS.694/1990 specification for Copper Cable of Category II of make V Guard/Bonton /Finecab/ HPL / Million /Fortune Art / Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser/Beljin/ Rhino/ Standard / Vimal etc., including cost of cable, all materials and labour charges for fixing etc., complete as directed by the Department authorities.
50
-
10822.5
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR BOTTOM SLAB.
17.83
-
131201.16
... More
Civil Engineering Work;Filling with Gravel for Basements and sides of Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work as directed by the Departmental authorities.
34.64
-
14293.16
... More
Civil Engineering Work;Kandukuru External Water Supply ELSR 300KLConstuction of OHSR / ELSR of 300 KL capacity with staging of 22Mts. including fixtures and all the Concrete members shall be designed with M30 grade design mix with Raft Footings including 3 Coats of eppoxy paint food grade of best quality to inner surface of reservoir including roof and 2 Coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes, Bends,Valves etc., for pipe connections excluding cost of pipes Bends and Valves as per departmental designs and drawings but including cost and conveyance of all materials to work site and the above rate inclusive of following fixtures A. RCC or Aluminum ladder inside 0.60 m wide B. Doglegged stair case shall be provided with stair case flight with of 1.2m and landing width of 1.2m with SS railing upto 1m height C. Providing lightening arrester including conductor and earthing etc., complete 1No's D. RCC Ventilators with copper or Stainless steel fly proof Mesh E. DI Manhole frame and cover 0.6 X 0.6m as per IS specfications(Light duty) 2No's. F.Water level indicator of good quality with abonite/Copper float approved pattern 1.No's G. The Railing provided to gallery and staircase shall be with stainless steel of grade 304 for height of 1.2m H. The Dog Legged staircase shall be enclosed with Brick/CRS Wall on 3 sides and front side with MS collapsable gate upto 1st brace level from ground level. I.DI Swan neck ventilators in topdome and slab.
300000
-
8346000
... More
Civil Engineering Work;Bore wells Geological Survey charges excluding taxes for Plain Area
3
-
3900
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for Chajja's.
0.48
-
6291.97
... More
Civil Engineering Work;Earthwork in excavation as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities for pipe line trench work
878.37
-
105123.32
... More
Civil Engineering Work;Construction of un reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T and P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days as per design and drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities.
157.39
-
1038451.35
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Culvert bed.
2.7
-
15029.93
... More
Civil Engineering Work;RO Plant Supply, Delivery, Erection and Commissioning of RO based Drinking water plant 500LPH. which consist of the followings 1. RAW WATER TRANSFER PUMP Quantity required One No. Material of construction CI. Capacity 1.5 m3/hr at 2.5kg/cm2, head 25 m. Make of material Kirloskar/ CRI/Eqvt. 2. MULTI GRADE FILTER Numbers required One No. Normal operating flow rate 1.0m3/hr Size of unit Dia × Ht. mm 12?×48? ,Material of construction FRP,Normal operating pressure 3.0kg /cm2,Tested Pressure 11.0 kg/cm2,Max. pressure drop 0.5kg/cm2 ,Flow control Top mounted multi port valve ,Media Graded silex and sand,Make Waterlife/Pentair ,3. ACTIVATED CARBON FILTER Numbers required One No. Normal operating flow rate 1.0m3/hr ,Size of unit dia × Ht. mm 12×48 ,Material of construction FRP ,Normal operating pressure 2.5 kg/cm2,Max. Pressure Drop 0.5 kg/cm2 Flow control Top mounted multi port valve ,Media Activated Carbon ,Activated Carbon Make VBD/Eqvt. Make Waterlife/Pentair,4. ANTISCALANT DOSING SYSTEM No. required One No. ,Type Diaphragm type electronic pump Capacity 0 5 LPH Make E dose / HITECH 5.MICRON FILTER Quantity required Two No. Type Disposable cartridge Operating flow rate 1.0 m3/hr ,Operating pressure 2.5 kg/cm2,Micron rating 5 micron ,Type of cartridge PP Wound ,MoC Polycarbonate. 6. HIGH PRESSURE PUMP Quantity required One No. Operating flow rate 1.5 m3/hr ,Operating pressure 12 14 kg/cm 2 ,Make of pump Sumo/CRI/Eqvt. Type of drive Single phase, 230 V, 50 Hz 2900 rpm. 7. RO MENBRANE HOUSING Quantity required TWO No. Material of pressure tube FRP 4040 Element capacity 02 No. Max. working pressure 300 psi Make Waterlife 8. RO MENBRANE Quantity required Two No. Dimensions Dia 4?, Length?40? ,Working pressure 180 psi Element Spiral wound Membrane. Make /HITECH /Eqvt. Pore size of semi permeable membrane 0.0001 micron diameters. 9. ELECTRICAL CONTROL PANEL ,Quantity required One no. Material of construction SS with powder coating, skid mount. Electrical components make L and T/Siemens/Havell?s. 10.U.V System.11.Ozen nessed.Instruments 1.pressure gauges(0.7kg/cm2) 02 nos 100mm dia,L/AEqvt (0 15kg/cm2) 02 Nos. 65mm dia, L/AEqvt.2. Flow meters 02 Nos. (One reject and One Permeate) 3.Pressure limiting Switches 02 Nos. line mounted adjustable. 4. Conductivity meter panel mounted online, Digital.
1
-
125000
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 110mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
390.84
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 110mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
390.84
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 200mm Dia. Sluice Valve as directed by the Departmental Authorities.
4
-
2196.48
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
36.04
-
2976590.09
... More
Civil Engineering Work;Labour charges for jointing 100mm Dia. Scour Valve with flanged ends including cost of joining material such as rubber insertion, white lead including filling with water with lead up to 500 meters and testing to required presure complete(Reference to specifications BIS No.3114/94). as directed by departmental authorities
2
-
632.66
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 150mm Dia. , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn 1.0 (MPa) as directed by the Departmental Authorities
5
-
110229.25
... More
Civil Engineering Work;Supply and delivery of Rubber Packing 6mm thick including cost and conveyance of all materials to site of work etc., complete as directed by the Departmental Authorities.
6.3
-
665.66
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
213.19
-
25514.58
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, correction charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for roof SLAB.
84.65
-
853454.84
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (150 I.D)
252
-
91619.64
... More
Civil Engineering Work;RO Plant Supplying and laying of CPVC PIPES of 54.00mm OD Pipe SDR 11 and fittings or equal and for Hot and Cold confirming to IS.15778 2007 with malleable specials such as Tees, Elbows, Check nuts, unions, bushes etc., colvent cement including fixing in walls, ceiling floors including cost and conveyance of all materials to site of work and include for necessary excavation in all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making bores in walls ceiling etc., and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the department.
15
-
8623.35
... More
Civil Engineering Work;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Culvert slab.
14.11
-
94788.58
... More
Civil Engineering Work;Supply and delivery of D.I. Double Flanged swing check type (Reflux Valves) Non Return Valves of 100 mm Dia. conforming to IS 5312 (Pts.1 and 2 with amendments upto date, if any) having body, cover, door, bearing holder with D.I., Hinge pipe, Door pin, door suspension pin with stainless steel (IS.6603), body seat ring, door face ring, bearing bushes, plugs for hinge pin with leaded tin bronze (IS.318), bolts, nuts with carbon steel, gaskets with rubber, hinges with cast steel inlcuding cost and conveyance of all materials to work site and loading, unloading, transportation etc., complete as directed by the Departmental Authorities.
1
-
18109.09
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for ROOF BEAMS.
0.63
-
7646.98
... More
Civil Engineering Work;Supply and delivery of Bolts and Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values as directed by departmental authorities.
15
-
1891.65
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 200mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
4
-
2785.84
... More
Civil Engineering Work;Manufacture as per company?s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company?s standards, loading, transportation, unloading and stacking at site of work etc, complete but excluding taxes such as sales tax, C.E.D and others etc., as applicable.., complete for Septic Tank.as directed by the Departmental authorities
64
-
12070.4
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for ROOF SLABS.
1.4
-
16915.75
... More
Civil Engineering Work;Supplying and fixing of approved make Automatic Star Delta Starter of make C and S/Crompton/L and T / Siemens/BCH suitable for 3 Phase, 415 V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete and as directed by the Departmental authorities
2
-
36862.38
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 100mm Dia. Scour Valve. as directed by the Departmental Authorities.
1
-
316.33
... More
Civil Engineering Work;0.60 x 0.90 m Window Providing and Fixing of openable windows made of Pre painted steel (base steel as per IS 513 of 0.58mm thick Galvanized as per IS 277 with zinc of 120 GSM ) primer coated with epoxy primer of 5 7 microns thick. finish painted with a polyester paint of 12 16 microns thick and back coated with 5 7 microns thick alkyd backer and section for outer frame of 48 x 50mm, centre mullion of 48 x 50 mm section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stairless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, including 10mm square guard bars with 6 Inch (152.4mm) pitch etc., complete for finished item of work. (Single shutter window 2'0 Inch x 4'0 Inch (609.6mm x 1219.2mm). Outer frame section size of 48 x 50mm shutter frame section size of 48 x 25mm and as directed by the Departmental Authorities
1
-
3522.84
... More
Civil Engineering Work;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub base/base course on a well prepared sub base and compacting with Vibratory Roller 80 100 kN weight to achieve the desired density including Cost and conveyance of all materials, all hire and operational charges of T and P etc., lighting, barricading and maintenance of diversion, etc as per Tables 400.11 and 400.12 and Technical Specification Clause 406 MORD / MORTH. as directed by the Departmental Authorities.
309.09
-
751645.06
... More
Civil Engineering Work;RO Plant Supplying and laying of CPVC PIPES of 34.9mm OD Pipe SDR 11 and fittings or equal and for Hot and Cold confirming to IS.15778 2007 with malleable specials such as Tees, Elbows, Check nuts, unions, bushes etc., colvent cement including fixing in walls, ceiling floors including cost and conveyance of all materials to site of work and include for necessary excavation in all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making bores in walls ceiling etc., and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the department.
3
-
818.01
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
6.4
-
741.25
... More
Civil Engineering Work;Bore wells Supply and run of 4 of 56/0.3mm (4.00Sq.mm) FR P.V.C. insulated flexible copper cableFRLS/FRLS H/HFFR/ ZHFR PVC insulated 1100V grade as per IS.694/1990 specification for Copper Cable of Category II of make V Guard/Bonton /Finecab/ HPL / Million /Fortune Art / Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser /Beljin/Rhino/ Standard / Vimal etc., including cost of cable, all materials and labour charges for fixing etc., complete as directed by the Department authorities.
975
-
211038.75
... More
Civil Engineering Work;Plastering 12 mm thick Single coat with C.M. (1 4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete. for Ceiling as directed by the Departmental Authorities.
64.62
-
25212.14
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR TOP DOME SLAB.
4.8
-
81578.16
... More
Civil Engineering Work;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
54.36
-
14232.54
... More
Civil Engineering Work;Supplying and fixing of 25mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete. for sump railings and inside and outside ladders and as directed by the Departmental authorities
105
-
32209.8
... More
Civil Engineering Work;Supply and delivery of tamper proof D.I., Flanged Single Chamber Air Release Valves of 50mm Dia. with body and cover made of Ductile Iron Grade GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per IS 1865, IS 3896 2 with food grade epoxy powder coating (EP P) (Min 250 Micron) inside and outside of color blue RAL 5005. All internal parts such as float, shell, cove bolts etc., made of austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/ EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination flange drilling as per IS 1538 and including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities.
1
-
12860.08
... More
Civil Engineering Work;Labour charges for jointing 150mm Dia. Scour Valve with flanged ends including cost of joining material such as bolts and nuts, rubber insertion, white lead including filling with water with lead up to 500 meters and testing to required presure complete(Reference to specifications BIS No.3114/94).
4
-
1945.76
... More
Civil Engineering Work;Lowering and keeping in position of 100 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
224.12
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 200mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
1
-
639.65
... More
Civil Engineering Work;Bore wells Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 8.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
183
-
25989.66
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE TEEs conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading,forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
1
-
3270.98
... More
Civil Engineering Work;Supplying and fixing of approved make Automatic Star Delta Starter of make C and S/Crompton/L and T / Siemens/BCH suitable for 3 Phase, 415 V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete and as directed by the Departmental authorities
3
-
55293.57
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.3
-
24777.39
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
1675.12
-
200478.36
... More
Civil Engineering Work;Lowering and keeping in position of 100 mm Dia. Scour valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
224.12
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
9
-
36912.96
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (150mm I.D)
220
-
14247.2
... More
Civil Engineering Work;Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI marked conforming to IS 1729 1979 of reputed make with cement caulked joints and fixing as per site requirements including painting black with Japan paint and fixing with necessary wooden blocks fixed in the masonry walls in cement mortar (1½ 1) and including fixing of M.S. clamps if necessary with required no. of Bombay nails etc., complete complete for Vent Pipe.as directed by the Departmental authorities
12
-
12570.36
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
213.19
-
25514.58
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
50.98
-
48066.49
... More
Civil Engineering Work;Earthwork in excavation as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities for pipe line trench work
4608
-
533698.56
... More
Civil Engineering Work;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities for pipeline bed.
147.46
-
158034.36
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain bed.
117.17
-
639627.51
... More
Civil Engineering Work;Lowering and keeping in position of 100 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
224.12
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.73
-
60291.64
... More
Civil Engineering Work;Plastering 12 mm thick Single coat with C.M. (1 3) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete for finished item of work etc., complete. for Ceiling as directed by the Departmental Authorities.
7.5
-
2661.6
... More
Civil Engineering Work;Construction of 904m (3' 0 Inch) Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1 3)Prop., 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
6
-
64044.78
... More
Civil Engineering Work;Manufacture,supply and delivery of 200 mm DI K7 Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS. 8329/2000 in standard working lengths of 4, 5, 5.5 and 6 meter for classification K7 suitable for push on joint (rubber gasket jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex factory, including transportation,.to site of work loading and unloading and stacking at site as directed by dept.authorities.
2000
-
4096960
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 200mm Dia. Sluice Valve as directed by the Departmental Authorities.
2
-
1098.24
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE TEEs conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading,forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
6541.96
... More
Civil Engineering Work;Painting to New wood work with primer and two coats with Synthetic enamel paint in all shades of Grade I aprpoved brand and colour including cost and conveyance of all materials to work site and all operational, incidential and all labour charges such as sand paper, cleaning the surface, cost of brushes etc., complete for finished item of work as directed by the department (Three coats).
1.78
-
363.81
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain bed.
35.62
-
198283.72
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (250 I.D)
134.76
-
22506.27
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 150mm Dia. , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn 1.0 (MPa) as directed by the Departmental Authorities
3
-
66137.55
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
237.52
-
28426.39
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
1.43
-
118105.54
... More
Civil Engineering Work;Lowering, Laying and Jointing of 110mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
273.6
-
13644.43
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc.,complete as directed by the Departmental Authorities.
4
-
2008.72
... More
Civil Engineering Work;Supplying and fixing of 100mm Dia. B class G.I. Pipe properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for connecting Motor at Sump to Panel Board and as directed by the Departmental authorities
30
-
25972.5
... More
Civil Engineering Work;Construction of 904.0 m (3' 0 Inch)Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1 3)Prop. 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
21
-
142439.22
... More
Civil Engineering Work;Bore wells 180mm dia. Pvc Casing pipe perforation charge
183
-
62586
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
68.3
-
71442.48
... More
Civil Engineering Work;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities for pipeline bed.
422.93
-
396302.33
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 63mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
3
-
228.36
... More
Civil Engineering Work;RCC M 20 Design mix (Cement fine aggregate coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing,centering and shuttering etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and as directed by the Departmental authorities for Pre cast Slab of Drains
40.5
-
249431.4
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300 2 of MoRT and H, including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities
1373.2
-
977086.73
... More
Civil Engineering Work;Construction of un reinforced, design mix M 30 grade cement concrete pavement, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixer laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T and P etc., curing of concrete slabs for 14 days as per Design and drawing and Technical Specification Clause 1501 MORD.(As per APDSS and as directed by the Departmental Authorities) for Block Approaches.
61.2
-
375293.09
... More
Civil Engineering Work;DOOR of SIZE 0.90 x 2.00 m Providing and fixing Door Frames fabricated from sections made of galvanized Stell powder coated (base steel as per IS 513, galvanized as per IS 277 with zinc of 120 grams/square meter), the factory made section are powder coated with pure polyester powder of 50 60 microns thick with total coated thickness of 1.25mm, size of Door Frame section of 105x60mm with a rebate of 38mm to accommodate 35mm thick Door Shutter with groove to insert gasket in the frame section, frame sectiion filled with polyurethane foam, cut to length and joined by way of welding each frame provided with (a) 2mm thick MS powder coated butt hinges of 100mm long 3 Nos for Single Shutter, 6 Nos., for double shutter (b) CRCA electroplates stiffeners of 6 Nos 3 in each vertical (c) 40mm x 200mm x 1.20mm hold fasts screwd to stiffeners 6 Nos. with split end tail (d) Nylon Aldrops Receiver 1 No. for Single shutter frame (e) Tie Road 1 No. and supplying and fixing of Single Leaf Flush Door Shutter Solid bond Wood black Board type with Commercial ply on both faces of 30mm thick conforming to IS.2202 including cost of fixtures such as (i) 2 Nos. 250mm long M.S.powder coated Aldrops, (ii) 1 No. 250mm long 10mm Dia. M.S.Powder Coated Tower Bolt, (iii) 2 Nos. 125mm long M.S.powder coated Door Handles and (iv) 1 No. M.S.Powder coated Door Stopper and including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental authorities
1
-
7838.54
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300 2 of MoRT and H, including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities
169.14
-
122621.43
... More
Civil Engineering Work;Construction of 904m (3' 0 Inch) Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1 3)Prop., 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
12
-
128089.56
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (200 I.D)
95
-
10146
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
810
-
92032.2
... More
Civil Engineering Work;Supply and Erection of PANEL MOUNTING 125 A, 4 Pole, 25 KA, MCCB adjustable of make L and T/Schneider/Siemens/Legrand/Hager confirms to IS/IEC 60847 2 having breaking capacity 35/36 KA with Thermal Magnetic setting/ Microprocessor based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental Authorities.
2
-
24768.62
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., Complete as directed by the Departmental Authorities
5
-
7282.7
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
1.15
-
4805.55
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (150 mm I.D)
220
-
79985.4
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538Supply and delivery of .D.I. Double Flanged Sluice Valves of 200mm Dia.including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn 1.0 (MPa) as directed by the Departmental Authorities
2
-
57214.24
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
33
-
135347.52
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
4697.33
-
3399598.64
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
12.54
-
7087.86
... More
Civil Engineering Work;Lowering and keeping in position of 200 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work as directed by the Departmental Authorities.
1
-
537.16
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC PLINTH BEAMS.
0.63
-
7801.84
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 110mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
390.84
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 100mm Dia. Sluice Valve. as directed by the Departmental Authorities.
2
-
670.02
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 100mm Dia. (Scour Valve) , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete .(pn 1.0 (MPa) as directed by the Departmental Authorities
1
-
14172.34
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
307
-
36741.76
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
31.5
-
3648.33
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 63mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
152.24
... More
Civil Engineering Work;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
2.65
-
191577.03
... More
Civil Engineering Work;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
64.62
-
16918.81
... More
Civil Engineering Work;Lowering, Laying and Jointing of 160mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
657.9
-
49480.66
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
410.04
-
49073.59
... More
Civil Engineering Work;Construction of 904m (3' 0 Inch) Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1 3)Prop., 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
12
-
128089.56
... More
Civil Engineering Work;Lowering, Laying and Jointing of 110mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
477.2
-
23797.96
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities. Cost of DWC Pipe (150 I.D)
170
-
61806.9
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., Complete as directed by the Departmental Authorities
5
-
7282.7
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
4.05
-
17796.67
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
622.35
-
74482.85
... More
Civil Engineering Work;Supplying and fixing of 8? SWG TEE junction of first class including cost and conveyance of all materials, air tight cement joints labour charges etc., complete.as directed by the Departmental authorities
8
-
4299.2
... More
Civil Engineering Work;Jointing for 200mm Dia CI/DI pipes and fittings with rubber gasket (push on joint), excluding the cost of the gasket but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 as directed by the Departmental Authorities.
550
-
154896.5
... More
Civil Engineering Work;Construction of granular sub base by providing well graded material for grading III spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.(CBR Value Minimum 30) including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as directed by the Departmental Authorities
149.52
-
254930.1
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for ROOF BEAMS.
0.63
-
7532.57
... More
Civil Engineering Work;Construction of 904m (3' 0 Inch) Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1 3)Prop., 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
12
-
128089.56
... More
Civil Engineering Work;Supply ,delivery and fixing of 50 mm dia Gunmetal gate valve (GM Peet) as per IS 778 Class I Indian make heavy type including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities
44
-
165268.84
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 100mm Dia. Scour Valve. as directed by the Departmental Authorities.
2
-
670.02
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
1.15
-
4981.18
... More
Civil Engineering Work;Providing and fixing double acting 50mm Air valve including boring the main, threading the bore and fixing the nipple ect., excluding cost rubber insertion bolts and nuts air valve and flanged tail piecee etc., complete.as directed by the departmental authorities
9
-
3122.82
... More
Civil Engineering Work;Construction of un reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T and P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days as per design and drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars (dowel bars) as directed by the Departmental Authorities.
1234.46
-
7603890.92
... More
Civil Engineering Work;DOOR of SIZE 0.90 x 2.00 m Providing and fixing Door Frames fabricated from sections made of galvanized Stell powder coated (base steel as per IS 513, galvanized as per IS 277 with zinc of 120 grams/square meter), the factory made section are powder coated with pure polyester powder of 50 60 microns thick with total coated thickness of 1.25mm, size of Door Frame section of 105x60mm with a rebate of 38mm to accommodate 35mm thick Door Shutter with groove to insert gasket in the frame section, frame sectiion filled with polyurethane foam, cut to length and joined by way of welding each frame provided with (a) 2mm thick MS powder coated butt hinges of 100mm long 3 Nos for Single Shutter, 6 Nos., for double shutter (b) CRCA electroplates stiffeners of 6 Nos 3 in each vertical (c) 40mm x 200mm x 1.20mm hold fasts screwd to stiffeners 6 Nos. with split end tail (d) Nylon Aldrops Receiver 1 No. for Single shutter frame (e) Tie Road 1 No. and supplying and fixing of Single Leaf Flush Door Shutter Solid bond Wood black Board type with Commercial ply on both faces of 30mm thick conforming to IS.2202 including cost of fixtures such as (i) 2 Nos. 250mm long M.S.powder coated Aldrops, (ii) 1 No. 250mm long 10mm Dia. M.S.Powder Coated Tower Bolt, (iii) 2 Nos. 125mm long M.S.powder coated Door Handles and (iv) 1 No. M.S.Powder coated Door Stopper and including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental authorities
1
-
7838.54
... More
Civil Engineering Work;ELSR 400KLConstuction of OHSR / ELSR of 400 KL capacity with staging of 22Mts. including fixtures and all the Concrete members shall be designed with M30 grade design mix with Raft Footings including 3 Coats of eppoxy paint food grade of best quality to inner surface of reservoir including roof and 2 Coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes, Bends,Valves etc., for pipe connections excluding cost of pipes Bends and Valves as per departmental designs and drawings but including cost and conveyance of all materials to work site and the above rate inclusive of following fixtures A. RCC or Aluminum ladder inside 0.60 m wide B. Doglegged stair case shall be provided with stair case flight with of 1.2m and landing width of 1.2m with SS railing upto 1m height C. Providing lightening arrester including conductor and earthing etc., complete 1No's D. RCC Ventilators with copper or Stainless steel fly proof Mesh E. DI Manhole frame and cover 0.6 X 0.6m as per IS specfications(Light duty) 2No's. F.Water level indicator of good quality with abonite/Copper float approved pattern 1.No's G. The Railing provided to gallery and staircase shall be with stainless steel of grade 304 for height of 1.2m H. The Dog Legged staircase shall be enclosed with Brick/CRS Wall on 3 sides and front side with MS collapsable gate upto 1st brace level from ground level. I.DI Swan neck ventilators in topdome and slab.
400000
-
9864000
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for ROOF BEAMS.
0.63
-
7255.23
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc.,complete as directed by the Departmental Authorities.
5
-
2510.9
... More
Civil Engineering Work;Filling with Stone Crusher Dust for filling Plot Area and to fill the ditch portions wherever necessary in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental and all labour charges etc., complete for finished item of work as directed by the departmental authorities.
1419.71
-
1388249.23
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
268.49
-
32132.88
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
51.41
-
45286.04
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
714.88
-
82797.4
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
777.48
-
90047.73
... More
Civil Engineering Work;Painting to New wood work with primer and two coats with Synthetic enamel paint in all shades of Grade I aprpoved brand and colour including cost and conveyance of all materials to work site and all operational, incidential and all labour charges such as sand paper, cleaning the surface, cost of brushes etc., complete for finished item of work as directed by the department (Three coats).
1.78
-
323.46
... More
Civil Engineering Work;Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI marked conforming to IS 1729 1979 of reputed make with cement caulked joints and fixing as per site requirements including painting black with Japan paint and fixing with necessary wooden blocks fixed in the masonry walls in cement mortar (1½ 1) and including fixing of M.S. clamps if necessary with required no. of Bombay nails etc., complete complete for Vent Pipe.as directed by the Departmental authorities
12
-
12570.36
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE TEEs conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
17
-
29782.98
... More
Civil Engineering Work;DOOR of SIZE 0.90 x 2.00 m Providing and fixing Door Frames fabricated from sections made of galvanized Stell powder coated (base steel as per IS 513, galvanized as per IS 277 with zinc of 120 grams/square meter), the factory made section are powder coated with pure polyester powder of 50 60 microns thick with total coated thickness of 1.25mm, size of Door Frame section of 105x60mm with a rebate of 38mm to accommodate 35mm thick Door Shutter with groove to insert gasket in the frame section, frame sectiion filled with polyurethane foam, cut to length and joined by way of welding each frame provided with (a) 2mm thick MS powder coated butt hinges of 100mm long 3 Nos for Single Shutter, 6 Nos., for double shutter (b) CRCA electroplates stiffeners of 6 Nos 3 in each vertical (c) 40mm x 200mm x 1.20mm hold fasts screwd to stiffeners 6 Nos. with split end tail (d) Nylon Aldrops Receiver 1 No. for Single shutter frame (e) Tie Road 1 No. and supplying and fixing of Single Leaf Flush Door Shutter Solid bond Wood black Board type with Commercial ply on both faces of 30mm thick conforming to IS.2202 including cost of fixtures such as (i) 2 Nos. 250mm long M.S.powder coated Aldrops, (ii) 1 No. 250mm long 10mm Dia. M.S.Powder Coated Tower Bolt, (iii) 2 Nos. 125mm long M.S.powder coated Door Handles and (iv) 1 No. M.S.Powder coated Door Stopper and including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental authorities
1
-
7688.86
... More
Civil Engineering Work;Bore wells Cost and supply of 175 mm dia. PVC blue threaded casing pipe(CM) including transportation to the work site.
183
-
211365
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 100mm Dia. (Scour Valve) , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete .(pn 1.0 (MPa) as directed by the Departmental Authorities
1
-
14172.34
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.3
-
24777.39
... More
Civil Engineering Work;Construction of 904.0 m (3' 0 Inch)Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1 3)Prop. 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.(FOR Valve Pits) as directed by the Departmental Authorities.
9
-
61045.38
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 200mm Dia. Sluice Valve as directed by the Departmental Authorities.
2
-
1098.24
... More
Civil Engineering Work;Bore wells Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 350/450 mm hole (for insertion of 160/175/200mm PVC Pipe/175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burled channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebuIlled pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, damps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per 1SI specification used for rotary tube well. The pebbled gravel acking should be carried out in such a way that the theoretical quantity consumed completely. The entire work to be carried out as per I.S. 2800 Part I and II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc.,
183
-
248880
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
408.77
-
48921.59
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
319.48
-
38235.37
... More
Civil Engineering Work;Supply ,delivery and fixing of 50 mm dia Gunmetal gate valve (GM Peet) as per IS 778 Class I Indian make heavy type including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities
17
-
63853.87
... More
Civil Engineering Work;Bore wells Cost and supply of 175 mm dia. PVC blue threaded casing pipe(CM) including transportation to the work site.
183
-
211365
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 150mm Dia. Sluice Valve. as directed by the Departmental Authorities.
6
-
3048.12
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
14.18
-
1697.06
... More
Civil Engineering Work;Lowering and keeping in position of 100 mm Dia. Scour valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
224.12
... More
Civil Engineering Work;Construction of un reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T and P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days as per design and drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities.
508.46
-
3344380.4
... More
Civil Engineering Work;Construction of 3' 0 Inch Dia. (upto a depth of 0.90 Mts.) Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1 3)Prop., 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 0.90 mts. (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification. (For Valve Chambers) as directed by the Departmental Authorities.
2
-
13565.64
... More
Civil Engineering Work;Construction of 904.0 m (3' 0 Inch)Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1 3)Prop. 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.(FOR Valve Pits) as directed by the Departmental Authorities.
2
-
13565.64
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
195
-
22155.9
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 100mm Dia. Sluice Valve. as directed by the Departmental Authorities.
2
-
670.02
... More
Civil Engineering Work;Supply and delivery of tamper proof D.I., Flanged Single Chamber Air Release Valves of 50mm Dia. with body and cover made of Ductile Iron Grade GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per IS 1865, IS 3896 2 with food grade epoxy powder coating (EP P) (Min 250 Micron) inside and outside of color blue RAL 5005. All internal parts such as float, shell, cove bolts etc., made of austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/ EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination flange drilling as per IS 1538 and including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities.
1
-
12860.08
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 100mm Dia. , including cost and conveyance of all materials to work site, loading, unloading traansportation charges and excluding all other connected taxes etc., complete.(pn 1.0 (MPa)
1
-
14172.34
... More
Civil Engineering Work;Filling with Stone Crusher Dust for filling Plot Area and to fill the ditch portions wherever necessary in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental and all labour charges etc., complete for finished item of work as directed by the departmental authorities.
487.87
-
464969.38
... More
Civil Engineering Work;Lowering, Laying and Jointing of 63mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
330
-
11899.8
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
13.73
-
60332.92
... More
Civil Engineering Work;Construction of 904m (3' 0 Inch) Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1 3)Prop., 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
9
-
96067.17
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
26.25
-
2168021.36
... More
Civil Engineering Work;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities for pipeline bed.
104.75
-
109569.55
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
222.01
-
26570.16
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
6.4
-
765.95
... More
Civil Engineering Work;RO Plant Supplying and laying of CPVC PIPES of 54.00mm OD Pipe SDR 11 and fittings or equal and for Hot and Cold confirming to IS.15778 2007 with malleable specials such as Tees, Elbows, Check nuts, unions, bushes etc., colvent cement including fixing in walls, ceiling floors including cost and conveyance of all materials to site of work and include for necessary excavation in all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making bores in walls ceiling etc., and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the department.
15
-
8623.35
... More
Civil Engineering Work;Lowering and keeping in position of 100 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
224.12
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (250 I.D)
219.41
-
36643.66
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (200 I.D)
245.93
-
26265.32
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 160mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
10
-
3817.5
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 100mm Dia. , including cost and conveyance of all materials to work site, loading, unloading traansportation charges and excluding all other connected taxes etc., complete.(pn 1.0 (MPa)
1
-
14172.34
... More
Civil Engineering Work;Supplying and fixing of RCC Cover of 22 Inch Dia. of 3 Inch thick with nominal reinforcement as directed by the department and hooks for lifting including cost and conveyance of all materials to work site and operational, incidental and all labour charges for fixing charges etc., complete for finished item of work.
2
-
1506.54
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
1187.68
-
137557.1
... More
Civil Engineering Work;Lowering, Laying and Jointing of 160mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
339.9
-
25563.88
... More
Civil Engineering Work;DOOR of SIZE 0.90 x 2.00 m Providing and fixing Door Frames fabricated from sections made of galvanized Stell powder coated (base steel as per IS 513, galvanized as per IS 277 with zinc of 120 grams/square meter), the factory made section are powder coated with pure polyester powder of 50 60 microns thick with total coated thickness of 1.25mm, size of Door Frame section of 105x60mm with a rebate of 38mm to accommodate 35mm thick Door Shutter with groove to insert gasket in the frame section, frame sectiion filled with polyurethane foam, cut to length and joined by way of welding each frame provided with (a) 2mm thick MS powder coated butt hinges of 100mm long 3 Nos for Single Shutter, 6 Nos., for double shutter (b) CRCA electroplates stiffeners of 6 Nos 3 in each vertical (c) 40mm x 200mm x 1.20mm hold fasts screwd to stiffeners 6 Nos. with split end tail (d) Nylon Aldrops Receiver 1 No. for Single shutter frame (e) Tie Road 1 No. and supplying and fixing of Single Leaf Flush Door Shutter Solid bond Wood black Board type with Commercial ply on both faces of 30mm thick conforming to IS.2202 including cost of fixtures such as (i) 2 Nos. 250mm long M.S.powder coated Aldrops, (ii) 1 No. 250mm long 10mm Dia. M.S.Powder Coated Tower Bolt, (iii) 2 Nos. 125mm long M.S.powder coated Door Handles and (iv) 1 No. M.S.Powder coated Door Stopper and including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental authorities
1
-
7838.54
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 200mm Dia. Sluice Valve as directed by the Departmental Authorities.
4
-
2108.28
... More
Civil Engineering Work;Providing Independent Earthing from Main switch Board for earth continuity with No.8, G.I wire including excavation of earth in all soils upto 5' 6'' depth below ground level of section 5'x2'x3' duly providing 40mm Dia G.I Pipe of 2mts, length using GI bolts and nuts and fixing earth wire including supply and fixing 1' 6'' dia 0' 8'' depth hume pipe ring and refilling the pit with 40 Kgs hard coke, 20Kgs salt and excavated earth including all labour charges etc., complete for finished item of work and as directed by the Departmental authorities
1
-
4302.43
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for ROOF SLABS.
1.4
-
18255.79
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Culvert walls.
18
-
140409.18
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC COLUMNS.
0.92
-
12261.97
... More
Civil Engineering Work;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities for pipeline bed.
1120
-
1049484.8
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.67
-
55336.16
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC COLUMNS.
0.92
-
12226.98
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC PLINTH BEAMS.
0.63
-
7279.93
... More
Civil Engineering Work;Lowering, Laying and Jointing of 160mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
262.2
-
19720.06
... More
Civil Engineering Work;Filling with Stone Crusher Dust for filling Plot Area and to fill the ditch portions wherever necessary in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental and all labour charges etc., complete for finished item of work as directed by the departmental authorities.
1228.19
-
1050655.14
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for ROOF SLABS.
1.4
-
18338.75
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (250 I.D)
180
-
30061.8
... More
Civil Engineering Work;Supply and Erection of PANEL MOUNTING 125 A, 4 Pole, 25 KA, MCCB adjustable of make L and T/Schneider/Siemens/Legrand/Hager confirms to IS/IEC 60847 2 having breaking capacity 35/36 KA with Thermal Magnetic setting/ Microprocessor based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental Authorities.
2
-
24768.62
... More
Civil Engineering Work;Construction of un reinforced, design mix M 30 grade cement concrete pavement, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixer laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T and P etc., curing of concrete slabs for 14 days as per Design and drawing and Technical Specification Clause 1501 MORD.(As per APDSS and as directed by the Departmental Authorities) for Block Approaches.
61.2
-
381947.98
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300 2 of MoRT and H, including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities
220.95
-
109299.55
... More
Civil Engineering Work;Forming embankment with 70 Percentage of Gravel and 30 Percentage of Sand by mechanical means with all leads and lifts including pre watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning including Cost and conveyance of all materials, all hire and operational charges of T and P etc., complete for finished item of work as per MoRT and H specification 305 (4th revision) with a lead beyond 1000m as directed by the Departmental Authorities for Side Berms
635.18
-
430639.34
... More
Civil Engineering Work;Supplying and fixing 602 x 602 mm CI man hole frame and cover (light weight) 30 Kgs as directed by the Departmental authorities
8
-
25767.92
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for Chajja's.
0.48
-
6328.53
... More
Civil Engineering Work;Supply and delivery of Rubber Packing 6mm thick including cost and conveyance of all materials to site of work etc., complete as directed by the Departmental Authorities.
1.8
-
190.19
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC FOOTINGS.
0.49
-
4750.43
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
72.76
-
75172.72
... More
Civil Engineering Work;RCC M 20 Design mix (Cement fine aggregate coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing,centering and shuttering etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and as directed by the Departmental authorities for precast slab for drain.
36.04
-
234508.32
... More
Civil Engineering Work;Supply and Erection of PANEL MOUNTING 125 A,4 Pole, 25 KA, MCCB adjustable of make L and T/Schneider/Siemens/Legrand/Hager confirms to IS/IEC 60847 2 having breaking capacity 35/36 KA with Thermal Magnetic setting/ Microprocessor based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental Authorities.
2
-
24768.62
... More
Civil Engineering Work;RO Plant Supplying and fixing of 32mm N.B. size Gunmetal Gate (G.M.Peet) Valve as per IS.778, Class I of Indian make heavy type including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work as directed by the department.
1
-
1898.51
... More
Civil Engineering Work;DOOR of SIZE 0.90 x 2.00 m Providing and fixing Door Frames fabricated from sections made of galvanized Stell powder coated (base steel as per IS 513, galvanized as per IS 277 with zinc of 120 grams/square meter), the factory made section are powder coated with pure polyester powder of 50 60 microns thick with total coated thickness of 1.25mm, size of Door Frame section of 105x60mm with a rebate of 38mm to accommodate 35mm thick Door Shutter with groove to insert gasket in the frame section, frame sectiion filled with polyurethane foam, cut to length and joined by way of welding each frame provided with (a) 2mm thick MS powder coated butt hinges of 100mm long 3 Nos for Single Shutter, 6 Nos., for double shutter (b) CRCA electroplates stiffeners of 6 Nos 3 in each vertical (c) 40mm x 200mm x 1.20mm hold fasts screwd to stiffeners 6 Nos. with split end tail (d) Nylon Aldrops Receiver 1 No. for Single shutter frame (e) Tie Road 1 No. and supplying and fixing of Single Leaf Flush Door Shutter Solid bond Wood black Board type with Commercial ply on both faces of 30mm thick conforming to IS.2202 including cost of fixtures such as (i) 2 Nos. 250mm long M.S.powder coated Aldrops, (ii) 1 No. 250mm long 10mm Dia. M.S.Powder Coated Tower Bolt, (iii) 2 Nos. 125mm long M.S.powder coated Door Handles and (iv) 1 No. M.S.Powder coated Door Stopper and including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental authorities
1
-
7688.86
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
7.75
-
7907.33
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Culvert walls.
10.8
-
87214
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for WALLS.
209.8
-
2784291.47
... More
Civil Engineering Work;0.60 x 0.90 m Window Providing and Fixing of openable windows made of Pre painted steel (base steel as per IS 513 of 0.58mm thick Galvanized as per IS 277 with zinc of 120 GSM ) primer coated with epoxy primer of 5 7 microns thick. finish painted with a polyester paint of 12 16 microns thick and back coated with 5 7 microns thick alkyd backer and section for outer frame of 48 x 50mm, centre mullion of 48 x 50 mm section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stairless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, including 10mm square guard bars with 6 Inch (152.4mm) pitch etc., complete for finished item of work. (Single shutter window 2'0 Inch x 4'0 Inch (609.6mm x 1219.2mm). Outer frame section size of 48 x 50mm shutter frame section size of 48 x 25mm and as directed by the Departmental Authorities
1
-
3522.84
... More
Civil Engineering Work;Supplying and fixing of approved make Automatic Star Delta Starter of make C and S/Crompton/L and T / Siemens/BCH suitable for 3 Phase, 415 V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete and as directed by the Departmental authorities
3
-
55293.57
... More
Civil Engineering Work;Construction of 904m (3' 0 Inch) Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1 3)Prop., 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
4
-
42696.52
... More
Civil Engineering Work;Supply and delivery of Bolts and Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values as directed by departmental authorities.
9
-
1134.99
... More
Civil Engineering Work;Manufacture,supply and delivery of 200 mm DI K7 Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS. 8329/2000 in standard working lengths of 4, 5, 5.5 and 6 meter for classification K7 suitable for push on joint (rubber gasket jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex factory, including transportation,.to site of work loading and unloading and stacking at site as directed by dept.authorities.
3300
-
6904326
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 110mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
390.84
... More
Civil Engineering Work;RO Plant Supplying and fixing of 32mm N.B. size Gunmetal Gate (G.M.Peet) Valve as per IS.778, Class I of Indian make heavy type including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work as directed by the department.
1
-
1898.51
... More
Civil Engineering Work;Supply and delivery of tamper proof D.I., Flanged Single Chamber Air Release Valves of 50mm Dia. with body and cover made of Ductile Iron Grade GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per IS 1865, IS 3896 2 with food grade epoxy powder coating (EP P) (Min 250 Micron) inside and outside of color blue RAL 5005. All internal parts such as float, shell, cove bolts etc., made of austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/ EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination flange drilling as per IS 1538 and including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities.
4
-
51440.32
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
1
-
2831.29
... More
Civil Engineering Work;Lowering, Laying and Jointing of 110mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
238
-
11869.06
... More
Civil Engineering Work;Lowering and keeping in position of 100 mm Dia. Scour valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
224.12
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (250 I.D)
200.01
-
33403.67
... More
Civil Engineering Work;Bore wells Supply and run of 4 of 56/0.3mm (4.00Sq.mm) FR P.V.C. insulated flexible copper cableFRLS/FRLS H/HFFR/ ZHFR PVC insulated 1100V grade as per IS.694/1990 specification for Copper Cable of Category II of make V Guard/Bonton /Finecab/ HPL / Million /Fortune Art / Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser/Beljin/ Rhino/ Standard / Vimal etc., including cost of cable, all materials and labour charges for fixing etc., complete as directed by the Department authorities.
585
-
126623.25
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 200mm Dia. Sluice Valve as directed by the Departmental Authorities.
2
-
1098.24
... More
Civil Engineering Work;Brick Masonry in C.M.(1 6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
7.4
-
49588.58
... More
Civil Engineering Work;Supply and Erection of PANEL MOUNTING 125 A, 4 Pole, 25 KA, MCCB adjustable of make L and T/Schneider/Siemens/Legrand/Hager confirms to IS/IEC 60847 2 having breaking capacity 35/36 KA with Thermal Magnetic setting/ Microprocessor based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental Authorities.
2
-
24768.62
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
61.86
-
54491.24
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
477.2
-
165364.12
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
115.19
-
513852.22
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
6.04
-
498851.39
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.83
-
68550.77
... More
Civil Engineering Work;Bore wells Geological Survey charges excluding taxes for Plain Area
3
-
3900
... More
Civil Engineering Work;Supply and delivery of Rubber Packing 6mm thick including cost and conveyance of all materials to site of work etc., complete as directed by the Departmental Authorities.
7.2
-
760.75
... More
Civil Engineering Work;Bore wells Geological Survey charges excluding taxes for Plain Area
3
-
3900
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, correction charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for Raft.
117.94
-
861488.01
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
12.54
-
7145.79
... More
Civil Engineering Work;Brick Masonry in C.M.(1 6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
7.4
-
45980.2
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
1.15
-
4867.65
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (250 I.D)
356.6
-
59555.77
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 100mm Dia. , including cost and conveyance of all materials to work site, loading, unloading traansportation charges and excluding all other connected taxes etc., complete.(pn 1.0 (MPa)
1
-
14172.34
... More
Civil Engineering Work;Bore wells Supply and Erection of PANEL MOUNTING 125 A, 4 Pole, 25 KA, MCCB adjustable of make L and T/Schneider/Siemens/Legrand/Hager confirms to IS/IEC 60847 2 having breaking capacity 35/36 KA with Thermal Magnetic setting/ Microprocessor based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the department.
3
-
37152.93
... More
Civil Engineering Work;Brick Masonry in C.M.(1 6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
1.35
-
9020.47
... More
Civil Engineering Work;Providing impervious coat to exposed RCC roof slab surface with CM(1 3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
1388.66
-
792091.66
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (250 I.D)
188
-
31397.88
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
22.05
-
2638.94
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for ROOF SLABS.
1.4
-
17316.64
... More
Civil Engineering Work;Supply and delivery of Bolts and Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values as directed by departmental authorities.
24
-
3026.64
... More
Civil Engineering Work;Earthwork in excavation as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities for pipe line trench work
787.54
-
94252.79
... More
Civil Engineering Work;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
4.57
-
365084.73
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
657.9
-
476141.97
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
1359.93
-
157507.09
... More
Civil Engineering Work;Providing Independent Earthing from Main switch Board for earth continuity with No.8, G.I wire including excavation of earth in all soils upto 5' 6'' depth below ground level of section 5'x2'x3' duly providing 40mm Dia G.I Pipe of 2mts, length using GI bolts and nuts and fixing earth wire including supply and fixing 1' 6'' dia 0' 8'' depth hume pipe ring and refilling the pit with 40 Kgs hard coke, 20Kgs salt and excavated earth including all labour charges etc., complete for finished item of work and as directed by the Departmental authorities
1
-
4422.29
... More
Civil Engineering Work;VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm and 12.50mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales and other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workt., for Foottings.
336.1
-
2986386.3
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
210
-
23860.2
... More
Civil Engineering Work;Supply and delivery of D.I. D/F 100 mm Dia. Semi Circular Bends for scour valve as per speD.Ifications of IS No.,7181/1986, 5531/1988 and 3950/1979 inlcuding cost and conveyance loading unloading and all other connected taxes etc., complete for finished item of work (each of 32.11 kgs weight).as directed by the Departmental Authorities.
1
-
4323.82
... More
Civil Engineering Work;Lowering, Laying and Jointing of 160mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
1325
-
99653.25
... More
Civil Engineering Work;Construction of 904.0 m (3' 0 Inch)Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1 3)Prop. 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.(FOR Valve Pits) as directed by the Departmental Authorities.
6
-
40696.92
... More
Civil Engineering Work;P.C.C. work of mix M15 (1 2.5 5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Culvert bed.
4.95
-
27452.5
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR TOP DOME SLAB.
5.24
-
89516.02
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538 D.I. Double Flanged Sluice Valves of 100mm Dia. , including cost and conveyance of all materials to work site, loading, unloading traansportation charges and excluding all other connected taxes etc., complete.(pn 1.0 (MPa)
1
-
14172.34
... More
Civil Engineering Work;Labour charges for Lowering and keeping in position of 200 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work.excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
626.69
... More
Civil Engineering Work;Filling with Local available Earth with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering including cost and conveyance all materials and water to work site and all operational charges, incidental charges and all labour charges, hire charges, complete for finished item of work and as directed by the departmental authorities.
6759.69
-
1540871.34
... More
Civil Engineering Work;Providing Independent Earthing from Main switch Board for earth continuity with No.8, G.I wire including excavation of earth in all soils upto 5' 6'' depth below ground level of section 5'x2'x3' duly providing 40mm Dia G.I Pipe of 2mts, length using GI bolts and nuts and fixing earth wire including supply and fixing 1' 6'' dia 0' 8'' depth hume pipe ring and refilling the pit with 40 Kgs hard coke, 20Kgs salt and excavated earth including all labour charges etc., complete for finished item of work and as directed by the Departmental authorities
1
-
4422.29
... More
Civil Engineering Work;Providing and fixing double acting 50mm Air valve including boring the main, threading the bore and fixing the nipple ect., excluding cost rubber insertion bolts and nuts air valve and flanged tail piecee etc., complete.as directed by the departmental authorities
2
-
847.68
... More
Civil Engineering Work;Supplying and fixing of CP Long body bib cock fancy type deluxe heavy duty 12.70mm Dia. Indian make heavy duty of approved make including cost and conveyance of all materials to work site and all jointing materials, labour charges etc., complete for finished item of work.
5
-
3255
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
534.25
-
63939.04
... More
Civil Engineering Work;Filling with Local available Earth with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering including cost and conveyance all materials and water to work site and all operational charges, incidental charges and all labour charges, hire charges, complete for finished item of work and as directed by the departmental authorities.
30693.42
-
6818236.32
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984 1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
339.9
-
245995.83
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for VRCC COLUMNS.
0.92
-
12281.5
... More
Civil Engineering Work;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Culvert slab.
16.13
-
106458.81
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
6.08
-
4602.26
... More
Civil Engineering Work;Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M 10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 MORTH
428.7
-
138538.69
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR TOP RING BEAM.
2.12
-
26099.17
... More
Civil Engineering Work;Supply and delivery of tamper proof D.I., Flanged Single Chamber Air Release Valves of 50mm Dia. with body and cover made of Ductile Iron Grade GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per IS 1865, IS 3896 2 with food grade epoxy powder coating (EP P) (Min 250 Micron) inside and outside of color blue RAL 5005. All internal parts such as float, shell, cove bolts etc., made of austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/ EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination flange drilling as per IS 1538 and including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities.
1
-
12860.08
... More
Civil Engineering Work;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T and P etc., complete for finished item of work and as directed by the Departmental Authorities.
8.1
-
8368.6
... More
Civil Engineering Work;0.60 x 0.90 m Window Providing and Fixing of openable windows made of Pre painted steel (base steel as per IS 513 of 0.58mm thick Galvanized as per IS 277 with zinc of 120 GSM ) primer coated with epoxy primer of 5 7 microns thick. finish painted with a polyester paint of 12 16 microns thick and back coated with 5 7 microns thick alkyd backer and section for outer frame of 48 x 50mm, centre mullion of 48 x 50 mm section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stairless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, including 10mm square guard bars with 6 Inch (152.4mm) pitch etc., complete for finished item of work. (Single shutter window 2'0 Inch x 4'0 Inch (609.6mm x 1219.2mm). Outer frame section size of 48 x 50mm shutter frame section size of 48 x 25mm.
1
-
3522.84
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 63mm Dia. HDPE TEEs conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
3
-
582.84
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 160mm x 200mm Dia. HDPE Reducers conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
3047.16
... More
Civil Engineering Work;Construction of 904m (3' 0 Inch) Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part I 1986 with CM(1 6)Prop. Fly Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1 3)Prop., 1/2 Inch thick both inside and outside and fitted with 20 Inch Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5' 0 Inch) in all sorts of soils (excluding rock) and laying CC(1 4 8) Prop. 150mm thick using 40mm HBG metal and PCC(1 2 4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
6
-
64044.78
... More
Civil Engineering Work;Supply and delivery of tamper proof D.I., Flanged Single Chamber Air Release Valves of 50mm Dia. with body and cover made of Ductile Iron Grade GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per IS 1865, IS 3896 2 with food grade epoxy powder coating (EP P) (Min 250 Micron) inside and outside of color blue RAL 5005. All internal parts such as float, shell, cove bolts etc., made of austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/ EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination flange drilling as per IS 1538 and including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities.
1
-
12860.08
... More
Civil Engineering Work;Laying PCC work of mix (1 4 8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
4.24
-
17717.86
... More
Civil Engineering Work;Lowering and keeping in position of 150 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
4
-
1519.48
... More
Civil Engineering Work;DOOR of SIZE 0.90 x 2.00 m Providing and fixing Door Frames fabricated from sections made of galvanized Stell powder coated (base steel as per IS 513, galvanized as per IS 277 with zinc of 120 grams/square meter), the factory made section are powder coated with pure polyester powder of 50 60 microns thick with total coated thickness of 1.25mm, size of Door Frame section of 105x60mm with a rebate of 38mm to accommodate 35mm thick Door Shutter with groove to insert gasket in the frame section, frame sectiion filled with polyurethane foam, cut to length and joined by way of welding each frame provided with (a) 2mm thick MS powder coated butt hinges of 100mm long 3 Nos for Single Shutter, 6 Nos., for double shutter (b) CRCA electroplates stiffeners of 6 Nos 3 in each vertical (c) 40mm x 200mm x 1.20mm hold fasts screwd to stiffeners 6 Nos. with split end tail (d) Nylon Aldrops Receiver 1 No. for Single shutter frame (e) Tie Road 1 No. and supplying and fixing of Single Leaf Flush Door Shutter Solid bond Wood black Board type with Commercial ply on both faces of 30mm thick conforming to IS.2202 including cost of fixtures such as (i) 2 Nos. 250mm long M.S.powder coated Aldrops, (ii) 1 No. 250mm long 10mm Dia. M.S.Powder Coated Tower Bolt, (iii) 2 Nos. 125mm long M.S.powder coated Door Handles and (iv) 1 No. M.S.Powder coated Door Stopper and including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental authorities
1
-
7838.54
... More
Civil Engineering Work;Lowering, Laying and Jointing of 200mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
120.5
-
13494.8
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538Supply and delivery of .D.I. Double Flanged Sluice Valves of 200mm Dia.including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn 1.0 (MPa) as directed by the Departmental Authorities
2
-
57214.24
... More
Civil Engineering Work;Supply and fixing to Cement JALLIES 40mm thick including cost and conveyance of all materials and water to work site and all operational, incidental charges, fixing, laying and all labour charges, curing etc., complete for finished item of work as directed by the departmental authorities
0.35
-
102.2
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for LINTELS.
0.07
-
921.49
... More
Civil Engineering Work;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
61.72
-
16159.53
... More
Civil Engineering Work;VRCC. M30 grade design mix concrete corresponding to IS 456 using Weigh Batcher with stone aggregate of 20mm and 12.5mm gauge graded hard broken granite machine crushed metal mechanically mixed with necessary reinforcement including cost and conveyance of all materials and water to work site, and all operational, incidental, labour charges, Centering charges such as Steel Scaffolding pipes, Jack props,Steel centering plates etc., mixing concrete, transportation, pumping of concrete, laying, levelling, curing etc., complete as per standard specifications but excluding cost of steel and its fabrication charges for finished item of work to the required strength as directed by the dept., for GLSR TOP DOME SLAB.
5.86
-
100434.66
... More
Civil Engineering Work;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for Chajja's.
0.48
-
5791.41
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 160mm Dia. HDPE BENDS conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding Excise duty,Sale Tax and speicals etc.,complete for finished item of work as directed by the Departmental Authorities.
1
-
1456.54
... More
Civil Engineering Work;Laying of Alcorr or similar type of Class SN8 structured wall (External Annular Corrugated and Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth and alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe and sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications and detail engineering, including carriage of pipes and fittings from site stacks to the place of laying etc. as per direction of Engineer in charge.(Payment to be made on the basis of actual finished length of pipe line). Cost of DWC Pipe (200 I.D)
237.6
-
25375.68
... More
Civil Engineering Work;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system with non smooth external annual corrugated and smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part II 2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities Cost of DWC Pipe (200mm I.D)
200
-
120204
... More
Civil Engineering Work;Supplying and fixing 602 x 602 mm CI man hole frame and cover (light weight) 30 Kgs as directed by the Departmental authorities
8
-
25767.92
... More
Civil Engineering Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
6.4
-
765.95
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 63mm Dia. HDPE End Caps conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
152.24
... More
Civil Engineering Work;Lowering, Laying and Jointing of 110mm Dia. HDPE Pipes by but fusion welding as per IS.7634 Part II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
387.2
-
19309.66
... More
Civil Engineering Work;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
0.39
-
29248.93
... More
Civil Engineering Work;Supply and delivery of Inch Resilient Seated Soft Sealing InchGate valve (Sluice valves) with body and bonet of Ducitle Iron GGG 40/SG 400/15 or GGG 50/SG 500/7 or equivalent as per I S1865, IS 3896 2, and Wedge fully rubber line with food grade quality grade W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3 O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100 Percentage leak proof with face to face dimensions as BS 5163 type A/IS 14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns) RAL5005 with Packet Less straight through body passage conforming to design standards of DIN 3202 F4/BS 5163 Type A flange drilling as per IS 1538Supply and delivery of .D.I. Double Flanged Sluice Valves of 200mm Dia.including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn 1.0 (MPa) as directed by the Departmental Authorities
2
-
57214.24
... More
Civil Engineering Work;Plastering 12 mm thick Single coat with C.M. (1 4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete. for Ceiling as directed by the Departmental Authorities.
64.62
-
25087.42
... More
Civil Engineering Work;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE TEEs conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading,forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
6541.96
... More
Civil Engineering Work;Labour charges for jointing C.I/ D.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts and nuts ,rubber insertion white lead filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 150mm Dia. Sluice Valve. as directed by the Departmental Authorities.
4
-
2032.08
... More
Civil Engineering Work;Manufacture, Supplying and delivery of 110mm Dia. M.S. Flanges conforming to IS.4984 1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
390.84
... More
Civil Engineering Work;Painting to kerb with approved Synthetic enamel paint 2 coats over priming coat with approved exterior grade cement paint making 3 coats in all colours including cost and conveyance of all materials, labour charges etc; complete for finished item of work (APSS No. 912)and as directed by the Department authorities
257.22
-
87902.36
... More
Civil Engineering Work;Brick Masonry in C.M.(1 6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
1.35
-
9048.38
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements