Andhra Pradesh Medical Services And Infrastructure Development Corporation Tender
... More
The APMSIDC has issued a formal invitation for competitive bids for the Andhra Pradesh Medical Services And Infrastructure Development Corporation project, for Providing Of Additional Facilities In State Cancer Institute In Government General Hospital At Kurnool In Kurnool District (2nd Call) in Kurnool, Andhra Pradesh, with an estimated contract value of Rs. 7,95,28,246. The bid opening date for this tender is 03-11-2023 and the last date for bid submission is 14-11-2023. Interested bidders for Andhra Pradesh Medical Services And Infrastructure Development Corporation tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Andhra Pradesh Medical Services And Infrastructure Development Corporation - APMSIDC Tender
Healthcare and Medicine
Opening Date3 Nov 2023
Closing Date14 Nov 2023
Tender Amount₹ 7,95,28,246
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
₹ 17,700
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
679897Bid Award Id
ViewTender No
11-1/APMSIDC/Technical/2023-24, Dt.02.11.2023Tender Authority
Andhra Pradesh Medical Services And Infrastructure Development Corporation ViewPurchaser Address
-Website
http://http://msidc.ap.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Cutting road surface including stacking of excavated materials for UG Cable trench work.
a) Cutting open B.T. road surface (as well as asphalt concrete up to 75 mm thick) including water bound macadam
10
1180
118
... More
Supply and run of 3 core 2.5 Sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990 for the high mast/octogonal poles inside from cable entry chamber upto luminaire including all labour charges etc., complete. Makes of wires:- Finolex/RR kabel/ Havells/ KEI/ Polycab/ Gloster/V-Guard/ HPL/ GM/ Million/Goldmedal/ Anchor.
100
13550
135.5
... More
Supply, Installation, testing and commissioning of Pressure sensor for VDF including making connections and soldering etc, complete.
Make : Honey Well / Johnson / Siemens
3
19500
6500
... More
Supply and run of 3 of 2.5 sq.mm (phase neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for individual ligting circuits including labour charges etc., complete as required for switch boards.
Makes of wires:- Finolex / RR kabel/ Havells.
12000
1693200
141.1
... More
Supplying and installation of Aluminium Volume control dampers with flanges for mounting on branch ducts and units etc complete. MAKE : Cosmic / System air /Carry air
6
45000
7500
... More
Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I)/1554-I
Makes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel
3.5 core, 25 Sq.mm
100
28060
280.6
... More
Supply and installation of Thermal insulation with 19mm thick Nitrile rubber/ XLPE faced with Aluminum foil fixed to the external surface of duct with Al foilceds with suitable adhesives as recommended by manufacturers.
MAKE: K- flex / Supreme /Paramount / Arma flex.
50
28750
575
... More
Supply and making heat shrinkable type indoor termination joint kit of approved make suitable for XLPE insulated 11 KV cable, with required components, prepration of cable ends, testing etc as required of following sizes. Makes: Raychem /M seal/ Denson/ Multy/ Transeal- Hongshang
Indoor Termination Kit for 11KV XLPE (E) : 3C x 120 sq.mm
6
73620
12270
... More
Supply and Fixing of OT Distribution Board:
DB for controlling Inside OT Surgeon Panel,X-Ray View Panel,Writiong Board and LED Lights and consisting of:
2 Pole - Incomer MCB - 32A - 1 No
Single Pole MCB-16A-14 Nos
Transfarmer 0-18V/3A - 1 Nos
Earth Connectrors for Earth (10Nos),Nutral (10Nos) and Control Panel Supply(14Nos)
Relays for on - Off Switch - 1 Nos
Make: Siemens/ BLS / CZS
3
93312
31104
... More
Supply & application of one coat water based cement primer of interior grade I and two coats of synthetic polymer luxury plastic emulsion paint of superior grade having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.
800
193600
242
... More
Supply and installation of fusible link mechanical Fire safety dampers according to NFPA 90A and UL 555. The casings and blades of fire dampers shall be constructed of zinc-coated steel of at least 1.9 mm thickness. MAKE : Cosmic / System air / Carry air
4
26000
6500
... More
Supply and fixing of ……mm thick copper pipe thick for distribution, pipes shall be half drawn, tempered, seamless, phosphorous deoxidized, non arsenic and decreased confirming to BS 2871-1971 Part-1 (Table-X) and the chemical compositions shall be as per BS 6017 of 1981 table-2 with Lloyd Test Certification, including cost and conveyance of pipes, cost of necessary specials made of copper and suitable for a steam working pressure of 17 bar and should confirm to BS 864 with specially made for brazed socket type connections, including taxes, transportation charges including laying and jointing, testing, commissioning and all other labour charges etc. complete for finished item of workMake: IBP Conex / Maxflow 54mm O.Dx1.5mm
100
761200
7612
... More
Masonry work in CM(1:6) prop (Cement : Sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, fly ash cement / lime solid blocks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504). 1st Floor
80
600560
7507
... More
Ornamental ceiling plastering 12mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904) 2nd Floor
701
329470
470
... More
Supply,transporatation & installation of following sizes of Hot Dipped Galvanized Iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete
300mm X 50mm X 1.6mm size
50
45390
907.8
... More
Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI
3.5 core, 25 Sq.mm
4
1241
310.2
... More
Supply, Transportation and Fixing of 90W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, supply Input voltage 120-270 V AC, P.F0.90, high power LED's having system efficacy120 lm/W and junction temprature70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), Driver surge protection 4KV, external Surge protection 10 KV with optics distribution, THD 10% at 110 Volts AC, driver efficiency 90%, CCT:3000K-5700K, minimum CRI70, etc., complete including fixing of luminaire on wall/Pole with 1.0 mt of 40mm dia GI pipe bracket and anti-tilting MS flat, 3 core 1.5 Sq.mm sheathed flexible round copper cable including all labour charges and giving connections etc., complete with 5 years warranty. a) Luminaire make: Wipro(Skyline)/Philips (Green line extra) / GE-Venture / Crompton(Nexus/Hawk series) / Bajaj (Edge) / Havells (Endura series) b) LED make:Philips Lumileds/ Cree/Nichia/ Osram/Samsung/LG LEDs
15
154800
10320
... More
Supply & Fixing of MS structural support for mounting of Floor mounted AHU with 50 x 50 x 5 mm angle finished with Epoxy painting as per standard practice
450
30600
68
... More
Supply and fixing of ……..consisting of all necessary accessories ie pressure sensors, regulators, pressure SWGs etc. complete including cost and conveyance of all materials, taxes, transportation charges etc. complete for finished item of work.Make: IBP Conex / Maxflow 3 Gas Digital Alarm Panel
2
63624
31812
... More
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Lintels-2nd Floor
5
70215
14043
... More
Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI
3.5 core, 95 Sq.mm
20
16384
819.2
... More
Supply, transportation and fixing of 36W/40W (600mm x 600mm) square type LED Slim Panel suitable for Recessed / Surface mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltage range of 150 to 265 Volts AC, P.F 0.9, SurGE-Venture protection: 2KV,THD10%, with high power LED's having efficacy of 120 lumins/watt,CCT: 3000K - 5700K, minimum CRI70 etc., complete including fixing in the ceiling with recessed/surface mounting, cost of all accessories and giving connections etc., complete, with 5 years warranty. a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG
In side OT's
12
47040
3920
... More
Supply and run of 1 of 22 /0.3mm (1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete. Makes of wires:- Finolex / RR kabel/ Havells
9500
336300
35.4
... More
Erection, Testing and Commissioning of Ductable Split Air Conditioners with intial charging of refrigerant for filling in pipe line Gas and MS structural work for supporting air cooled condensors. on wall / flooring.and PVC drain piping for the units
a. 11.0 Ton
15
97500
6500
... More
Supply and 3 runs of 4.0 sq mm (phase neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing conduit pipe for run of mains including labour charges etc., complete as required including labour charges for 16A sockets and AC points
Makes of wires:- Finolex / RR kabel/ Havells.
4500
867150
192.7
... More
Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors.
1900
560500
295
... More
Supply and Laying of Coving : Supply and installation of Aluminium Extruded profiles with 1.50mm thick. Coving has executed as male and female. Gemale coving with "V" Groove for clip grip for male & supporting at wall to ceiling, wall to wall & wall to floor. Male coving with clip on type power coated / PCGI Nickel - Chrome Anodizing radius - R 70. to avoid dust accumulation at 90 deg. places like wall to floor, wall to wall & wall to ceiling. Make :- Sumangalam / Zindal.
wall to wall and wall to ceiling
150
54150
361
... More
Supply and fixing of ISI 25mm outer dia (2.00 to 2.20)mm thickness, heavy grade with IS:9537 part 3 FRLS rigid PVC pipe (ISI marked) concealed in Roof Slabs with all required MS deep junction boxes and all accessories including and labour charges etc., complete. Makes : Precision/Universal& Marudhar/VIP/AKG
800
98480
123.1
... More
Random Rubble stone masonry in CM (1:8) prop: (Cement: Sand) using hard other than granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site, including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc.,and overheads & contractors profit complete for finished item of work in foundation and basement. (APSS No. 601 & 615)
45
206550
4590
... More
Supply, installation, testing& commissioning of GSS Ducting with required angle flanges & installation materials such as heavy duty supports by anchor fasteners etc as required asper IS 655 /SMACNA Standards.Makes:TATA/Jindal 20 G
50
79100
1582
... More
Supply and Fixing of Surgical Scrub: Surgical scrub sink should be designed for use in OT complex providing Surgeons with a convenient sink for pre – OT scrub up. Each fixture should be fabricated with 18 SWG SWG type 304 stainless steel and should be seamless welded construction, polished to a stain finish. The scrub sink should be provided with a water controlled value, waste connections, stoppers and strainers. 4 Feet Length and 3 Feet Hight with 2 Foot operated and 2 elbow taps should be there. Make : Zindal/ Tata
3
206460
68820
... More
Supply and erecting fully automatic line voltage stabilizer for operation on input voltage 200V to 250V rated for 4 KVA maximum load and time delay model with 16A, 3-way connector/ socket for output and with 3 core flexible chord and 3 pin 6/16A plug top for input suitable for Air-conditioner for continuous operation including cost and conveyance of all mateials and all labour charges etc., complete.
Stabilizer Makes : V-Guard/Real Guard/Uni Stab/ITL
4 KVA
5
19286
3857.2
... More
Supply and Fixing of Adapter for Nitrous Oxide
2
260
130
... More
Supply and Installation of 20 Pair Telephone distribution box with back mount frame, krone connector, powder coated metal body with lock and key arrangement. Makes: Krone or equivalent make.
15
22889
1525.9
... More
Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proofcompartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness,separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator).Incomer :-Supply of 250A, 4 Pole, Adjustable, Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted. Makes: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno-1noOutgoing feeders:-Supply of 125A, 3 Pole, Adjustable, Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. Makes: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno-4noSupply of ,63A TP MCB 10KA C/D Curve ISI Mark. Makes: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno) -16 no
Metering:-Supply and Fixing of (0-500) V range Volt meter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves/channel etc., as required. Make:Conzerve/Elmeasure/ Meco/ HPL/L&T/ Socomec-1NOSupply and Fixing of CT operated direct reading type Ammeter, below 500A, on existing panel , making connection by PVC insulated copper conductor with PVC sleeves/channel etc. as required. Make: Conzerve/Elmeasure/Meco/HPL/ L&T/ Schneider/AE/ Socomec-1NOSupply and Fixing of Current Transformer, from 200 / 5 to 400/5 Ratio , 10 VA , class 1 accuracy with all necessary support in existing panel including connection etc. as required Make: Kappa/L&T/ Seimens/ C&S/ Schneider-3noSupply and Fixing of 240/220 V, LED (22.5 mm dia) Pilot lamp Red & Yellow Colour with integral circuit, terminal block, including connection etc. as required-2NOSupply and Fixing of 240/220 V, LED (22.5 mm dia) Pilot lamp Blue Colour with integral circuit, terminal block, including connection etc. as required- 1NoSupply and Fixing of selector switch for voltmeter (4 position) including making connection etc. as required. Make: L&T / C&S/ Salzer/HPL - 2NoSupply and Fixing of CT linked selector switch of 10 A for Ampere meter (4 position) including making connection etc. as requiredMake: L&T/C&S/Salzer/ HPL- 1 No10 kA - 6-32A range SP MCBs. Make: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Crabtree-Xpro/L&T-AU -6 NoSupply and Fixing of 250A MCCB EXTENDED ROTARY HANDLE Make:L&T ( DN2 Extended ROM)-4NOSupply and Fixing of 125A MCCB EXTENDED ROTARY HANDLE Make:L&T ( DN0 Extended ROM)-2NOSupply and Fixing of 63A MCCB EXTENDED ROTARY HANDLE Make:L&T ( DN0 Extended ROM)-2NOBus Bars:-Supply and fixing of Electrolytic grade aluminium bus bars by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleevesFOR Main Bus Bars horizontal Phases & Neutral ((60x10x1.3x2.7)/1000) x 4 = 8.42 KgFor VERTICAL Phases & Neutral ((80x10x1.5x2.7)/1000) x 4 = 12.96 KgFor VERTICAL Phases & Neutral ((60x10x1.5x2.7)/1000) x 4 = 9.72 KgConecting Links for all MCCBs = (60x10x0.6x2.7/1000)x4x1 +(50x10x0.6x2.7/1000)x4x2 + (25x10x0.6x2.7/1000)x4x4+(25X6X0.6X2.7/1000)X4X4 = 3.88 Kg +6.48 Kg + 6.48+1.94 = 18.78 KgControl wiring with suitable size of approved make FRLS PVC flexible copper wires, Earth Bus Bar, Door Loop earhtings, Ferrules, Feeder identifications, danger plate, door locks etc., labour charges for errection of switch gears, panels boards, with all other accessories including all labour charges etc with connections for finished item of work @ 5%
1
341200
341200
... More
Supply and Fixing of 25mm outer dia (1.60 to 1.80)mm thicknes medium grade with IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) concealed in wall with all required MS junction boxes and all accessories including masonary work for run of mains including all labour charges etc., complete. Makes : Precision/ Universal& Marudhar/VIP/ AKG
100
12980
129.8
... More
Supply and Installation of 50 Pair Telephone distribution box with back mount frame, krone connector, powder coated metal body with lock and key arrangement. Makes: Krone or equivalent make.
5
15775
3155
... More
Supply, installation and testing of Refrigerant Piping consisting of copper tubes of wall thickness 20G/22G inclusive of Suction Gas Piping & Fittings, Liquid Line Piping & Fittings, with class "O" nitrile rubber Insulation with finish as required. The piping to be mounted & supported properly with suitable size of clamp, M.S. hanger, tray etc., as required at site.Makes:Totaline/Mandav/Mexico.
The insulation shall be closed cell/cross linked elastomeric Nitrile rubber of thickness 13/19 mm.The insulation thickness upto 19.1 mm dia pipe shall be 13 mm and above 19.1 mm dia, the insulation thickness shall be 19 mm.
Testing of refrigerant piping and procedure shall be done as per Manufacturer's recommendations 12.7 mm
50
53750
1075
... More
Supply, Installation, Testing and commissioning of Non caller ID push button Telephone instruments etc., complete with connectors. Make : Beetel / NEC/ Alcatel /Avaya/Seimens.
90
50580
562
... More
Supply and Run of 50mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete
100
26640
266.4
... More
Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) in existing pipe with 2 Way 6A Modular switch (ISI marked) with cover plate, Ceiling rose/BH/ SBH, including all labour charges etc., complete for 2-way light and fan points/stair case light points etc., complete. (for Non Residential Building) Makes of wires:- Finolex / RR kabel/Havells. Makes of switches:- Legrand (Arteor) / Schneider (Clipsal X/ Crabtree Murano
1
1281
1281
... More
Labour charges for run of armoured U.G cables from 70 Sq.mm to 300 Sq.mm in existing cable trench/cable duct/ cable tray/hume pipe/G.I. pipe with necessary fixing arrangments such as cable ties etc., as directed by department at site.
50
3090
61.8
... More
Supply Installation Testing And commissioning of DG Set complete with 1500 RPM Diesel Engine of suitable BHP & AC Brush less SPDP Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled.Alternator: It shall be self-regulated, self-excited and confirms to IS: 13364/1992 or latest version with regulation of +5% from No load to full load, IP23, with standard Alternator Protection (over voltage, over speed
& under voltage).Diesel Engine: It shall have residential silencer, up to 10 M exhaust piping, electronic / Mechanical governor, Manual & electric Start, Batteries, Fuel tank & piping, control panel (16 G) with SPN(For 5 KVA)/TPN MCCB of required rating (25/36/50 KA) with PLC based Engine controller supplied by OEM, Ammeter, Voltmeter, Frequency Meter or Multi-function meter, Energy Meter & Hour Meter, Engine instruments panel, AVM and Automatic Voltage Regulator. The diesel engine shall be capable of providing 10% overload for 1 Hr for every 11 Hrs of continuous running at full load. The DG set shall be supplied with initial filling of fuel, lube oil, coolant oil as per OEM specifications and shall be tested at site.Acoustic Enclosure: Weatherproof, powder coated Acoustic enclosure for DG set for sound attenuation fabricated from 1.6 mm CRCA sheet steel (structure) with side wall fabricated from 1.6 mm CRCA sheet and filled with foam as per CPCB norms latest amendments & IS 8183. The doors are fabricated from 1.6 mm CRCA sheet packed with acoustic material, floor of MS chequered plate 5.0 mm thick, all doors/ opening are sealed with neoprene/ EPDN gasketsThe DG Set shall be maintained for two years after commissioning by the supplier including regular servicing, cost of consumables etc complete as specified by the OEM along with warranty for two years.
The enclosure has built in fuel tank, residential silencer (isolated from main DG chamber) with protection and tripping of DG set against temperature of more than 50 °C. All controls for operation of DG set are from outside the enclosure with DG control panel having processor based genset monitoring and control system MCCB/ACB Ammeter, voltmeter, PF meter, frequency meter, KWH meter, Ind. Lamps etc. mounted inside enclosure, visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator. Noise level is less than 75 db (A) at a distance of 1 Mtrs as per CPCB-II norms, complete in all respect of following capacity:500 KVA Generator Set 500kVA at 0.8 pf 415V 50Hz 3-Ø
Engine Makes:Caterpillar/Perkins/Cummins/Greaves/KOEL
Alternator Make:Leroy somer/Crompton Greaves/Stamford
1
3578873
3578873
... More
Supply and fixing of Co2 type Fire Extinguishers 4.5 Kg capacity confirming to IS 2878 made from ISI marked steam less cylinder confirming to IS:7285 & CE certified and fitted with ISI marked controlled valve confirming to IS:3224, high pressure 1 Mtr discharge hose & horn complete with initial gas charged with carrying handle with wheels and wall mounting bracket. Squeeze lever discharge, used un-used indicator, Aphoxy coated paint (Red) with 93% gloss with 2 years warranty Including transportation, all taxes and all labour charges etc complete.
Makes : Cease Fire / Minimax
4
65120
16279.9
... More
Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work (APSS NO.309&310)
85
3570
42
... More
Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI
3.5 core, 50 Sq.mm
10
4817
481.7
... More
Providing independent earthing for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia G.I Pipe of 2.5 mtr length connected with reducer providing G.I funnel with wiremesh as per National Electric Code including C.C.Chamber of size 400m x 400m x 400mm covered with R.C.C. Slab filling with salt and charcoal giving earth connection from electrode with Copper strip of 25mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to Copper strip with all accessories and labour charges complete as per IS specification 732/1982 (Part II).
10
210050
21005
... More
Part - III : Bed Head Wall Panels ICU (Two Meters Length) Supply, installation and providing wiring and piping connections for bed head wall panels. The panel shall be fabricated out of high strengths extruded alluminium sections with inbuilt single railing and powder coated to color as per the Owners choice. The panel shall have facility to accomodate : Max. 5 nos of Gas outlets, 8 Nos 5/15 A multi pin switched socket outlets (Raw power+UPS Power), 1 no. Telephone socket, 1 no. RJ 45 socket, 1 no. Nurse call switch panel with wired remote, 1 no. arm lamp 60W with adaptor, 1 no. Infusion pump (rail mount pole with adaptor to be provided in the panel), 1 no. IV tree (rail mount to be provided in the panel) with adaptor and holder for vacuum collection jar (should be provided in-built in the panel). Make: Pratibha Medinox
30
395928
13197.6
... More
Supply, Erection and Testing of GI Opposed blade Volume control dampers made out of 18G frame and 20G blades
20
155220
7761
... More
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 'Plinth Beam
28
332584
11878
... More
Supply and Instatlation of IP Phone NEC -ITX-1615
5
24130
4826
... More
Supply and fixing of luminaire carriage suitable for for fixing 4/6 flood light luminaires on high mast/mini mast pole made of 50mm dia G.I. pipe, suitable pole cap, including Labour charges for fixing on the pole, fixing of luminaires, transportation and giving connections etc., complete.
1
2923
2923.1
... More
Masonry work in CM(1:6) prop (Cement : Sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, fly ash cement / lime solid blocks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504). 3rd Floor
15
126165
8411
... More
Reinforced Masonry for partition walls (100 mm thick) in CM (1:4) prop. (Cement : Sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cmand placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, fly ash cement / lime solid blocks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors profit but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 509) 2nd Floor
115
118450
1030
... More
Wiring with 2 of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) in existing pipe with 6A (ISI marked) modular type switches and 6A, 3/2 pin modular type socket with cover plate fixing on existing, separate modular switch box including all labour charges etc., complete.
Makes of wires:- Finolex / RR kabel/Havells/ Makes of switches/sockets:- Legrand (Arteor) / Schneider (Clipsal X)/ Crabtree Murano
5
3649
729.8
... More
Supply and erecting 19/20mm steel tube down rod of 0.75 mt length with bolts & nuts duly painted with matching colour of fan complete
250
46450
185.8
... More
Supply and Fixing of 32mm outer dia (1.90 to 2.10)mm thicknes medium grade with IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) concealed in wall with all required MS junction boxes and all accessories including masonary work for light, bell, fan, and separate plug point with hot dip galvanized 20/18 SWG MS modular metal switch box with earthing terminal including all labour charges etc., complete. Makes : Precision/Universal& Marudhar/VIP/AKG.
100
16930
169.3
... More
Supply and fixing of…… Isolation Valves with necessary brass end fittings designed for a working pressure of 300 psi / 27 inc. Hg. Vacuum, Non Ferrous, Non Lubricated with 90 degrees turn, Hand lever operated of standard make of valves including cost and conveyance of all materials, taxes, transportation charges, fixing charges and testing charges and all labour charges etc. complete for finished item of workMake: IBP Conex / Maxflow 54 mm Valves (2")
5
43520
8704
... More
Labour charges for run of U.G cables upto 50 sq.mm on wall with necessary fixing arrangments such as saddles, clamps etc., as directed by department including cost and conveyance of all materials etc., complete.
100
5900
59
... More
Supply and Fixing of Anesthesia Single Arm Pendant - Comprising of
- 1 x Arm 1000 mm having a
- 1 x drop tube having a carrying capacity of maximum load of 80 kg
- Rotation of 355 deg.
- 1 x Tray (350x350x50 mm)
- 1 x Adjustable shelf (350x350x50mm)
- 6 x Mains Socket (6/16Amp)
- 8 x Medical Gas Terminal Units & Hose Assembly
(2 x Oxy, 2xVac, 2xAir(4bar), 2xN2O)
- Data ports - 1 No ,
- I.V pole with 4 Hooks & Infusion pump pole - 1 set
Make : Meditech / Altos / Aravali / Digiline/ Oxylab or Equivalent)
14
1750000
125000
... More
Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proofcompartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness,separate detachable, gland plate M.S. base channel, hinged door with locking arrangement forequipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator).
Incomer :-Supply of 250A, 4 Pole, Adjustable, Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted. Makes: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno-1noOutgoing feeders:-Supply of 125A, 3 Pole, Adjustable, Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. Makes: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno-4noSupply of ,63A TP MCB 10KA C/D Curve ISI Mark. Makes: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno) -16
Metering:-Supply and Fixing of (0-500) V range Volt meter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves/channel etc., as required. Make:Conzerve/Elmeasure/ Meco/ HPL/L&T/ Socomec-1NOSupply and Fixing of CT operated direct reading type Ammeter, below 500A, on existing panel , making connection by PVC insulated copper conductor with PVC sleeves/channel etc. as required. Make: Conzerve/Elmeasure/Meco/HPL/ L&T/ Schneider/AE/ SocomecSupply and Fixing of Current Transformer, from 200 / 5 to 400/5 Ratio , 10 VA , class 1 accuracy with all necessary support in existing panel including connection etc. as required Make: Kappa/L&T/ Seimens/ C&S/ SchneiderSupply and Fixing of 240/220 V, LED (22.5 mm dia) Pilot lamp Red & Yellow Colour with integral circuit, terminal block, including connection etc. as requiredSupply and Fixing of 240/220 V, LED (22.5 mm dia) Pilot lamp Blue Colour with integral circuit, terminal block, including connection etc. as required- 2NoSupply and Fixing of selector switch for voltmeter (4 position) including making connection etc. as required. Make: L&T / C&S/ Salzer/HPL - 2NoSupply and Fixing of CT linked selector switch of 10 A for Ampere meter (4 position) including making connection etc. as requiredMake: L&T/C&S/Salzer/ HPL- 2 NoSupply and Fixing of selector switch for voltmeter (4 position) including making connection etc. as required. Make: L&T / C&S/ Salzer/HPL -4No 10 kA - 6-32A range SP MCBs. Make: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Crabtree-Xpro/L&T-AU - 24 NoSupply and Fixing of 630A MCCB EXTENDED ROTARY HANDLE Make:L&T (DN3B, DN3 Extended ROM)-1NOSupply and Fixing of 400A MCCB EXTENDED ROTARY HANDLE Make:L&T (DN3B, DN3 Extended ROM)-1NOSupply and Fixing of 250A MCCB EXTENDED ROTARY HANDLE Make:L&T ( DN2 Extended ROM)-1NOSupply and Fixing of 125A MCCB EXTENDED ROTARY HANDLE Make:L&T ( DN0 Extended ROM)-2NOSupply and Fixing of 63A MCCB EXTENDED ROTARY HANDLE Make:L&T ( DN0 Extended ROM)-2NOBus Bars:-Supply and fixing of Electrolytic grade aluminium bus bars by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleevesFOR Main Bus Bars horizontal Phases & Neutral ((60x10x1.3x2.7)/1000) x 4 = 8.42 KgFor VERTICAL Phases & Neutral ((80x10x1.5x2.7)/1000) x 4 = 12.96 KgFor VERTICAL Phases & Neutral ((60x10x1.5x2.7)/1000) x 4 = 9.72 KgConecting Links for all MCCBs = (60x10x0.6x2.7/1000)x4x1 +(50x10x0.6x2.7/1000)x4x2 + (25x10x0.6x2.7/1000)x4x4+(25X6X0.6X2.7/1000)X4X4 = 3.88 Kg +6.48 Kg + 6.48+1.94 = 18.78 KgControl wiring with suitable size of approved make FRLS PVC flexible copper wires, Earth Bus Bar, Door Loop earhtings, Ferrules, Feeder identifications, danger plate, door locks etc., labour charges for errection of switch gears, panels boards, with all other accessories including all labour charges etc with connections for finished item of work @ 5%
1
352500
352500
... More
Supply and Transportation of 48" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator.
Makes : Crompton HS Plus / Havells ES PLUS/Orient Energy Star
250
666250
2665
... More
Supply and erecting fully automatic line voltage stabilizer for operation on input voltage 200V to 250V rated for 5 KVA maximum load and time delay model with 16A, 3-way connector/ socket for output and with 3 core flexible chord and 3 pin 6/16A plug top for input suitable for Air-conditioner for continuous operation including cost and conveyance of all mateials and all labour charges etc., complete.
Stabilizer Makes : V-Guard/Real Guard/Uni Stab/ITL
5 KVA
5
23405
4680.9
... More
Supply, Transportation, Installation, Testing and Commissioning of the following Inverter model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidigation.
2.0/2.2 TR 5 star capable of delivering 24000 BTU/hr and above with operating on refrigerant R-410A / R-32. Makes: Mitsubishi /O General /Toshiba (prevailing models in the market)
5
498837
99767.3
... More
Supply installation testing and commisioning of 4 pair 23AWG Cat-6 UTP, flexible, double ended patch cords along with 2 nos of RJ 45 connectors with strain relief boots compatible to T568A,T568B specifications including making connections to information outlets of length - 2 mtr/7 ft
Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand
400
135440
338.6
... More
Supply and Fixing of Condenser stand for Ductable machines etc., complete.
30
105000
3500
... More
Supply and fixing of…… Isolation Valves with necessary brass end fittings designed for a working pressure of 300 psi / 27 inc. Hg. Vacuum, Non Ferrous, Non Lubricated with 90 degrees turn, Hand lever operated of standard make of valves including cost and conveyance of all materials, taxes, transportation charges, fixing charges and testing charges and all labour charges etc. complete for finished item of workMake: IBP Conex / Maxflow 28 mm Valves (1")
15
41175
2745
... More
Supply and Fixing of standard 18"x12"x8" first aid box with all standard contents at appropriate place in the sub-station.
2
2956
1478
... More
Supply of Automatic Street Light Control System with Optical Micro Sensor, Low voltage / High voltage trip and reset, operating voltage 150 -280V AC per Phase, 50 HZ with suitable SMC enclosure of IP 54 protection, MCBs and contactor suitable to control the load of ....... of Three phase load with necessary clamping arrangements.
Make: Swadeep Nature Switch / Light Mate /GL/Bajaj 5 KW
1
18497
18497
... More
Supply ,installation, testing and commissioning of 48 port Managed Switch with 4 SFP slots Make & Model: CISCO CBS 350-48T-4G-IN or equivalent in Juniper/Extreme
2
187248
93624
... More
Earth work excavation of Trench in hard ground soil, laying of U.G cables upto 50 Sq,mm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.
100
27350
273.5
... More
Providing , laying, testing & Commissioning of following classes MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.B-CLASS MS PIPES
Makes : Jindal / Hissar / Tata pipes/Prakash Surya 100mm dia
10
22600
2260
... More
Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI
3.5 core, 35 Sq.mm
10
4124
412.4
... More
Supply and laying of 20 pair telephone wire 0.5mm copper in the existing metallic/non metallic conduit pipe with connections etc.,completeTelephone wire Makes: Finolex / Delton / Surabi / Polycab
100
11170
111.7
... More
Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) 3rd Floor
189
124929
661
... More
Supply and Fixing, Installation, Testing and Comissioning of Wall mounted Communication rack in two sections viz rear wall mount Section and hinged front section with glass doors, swing handles ,lock , Top and Bottom Cable entries,Supports for mounting rack on wall , Cable managers, Fan tray with 2 x 230 Volt fans, Equipment mounting hardware, wire managers , power supply box for supplying power to hubs, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable, Blank panels , sliding shelves etc. 1) 9 U(44 mm ) wall mounted
Make: APW/HCL/Valrack/Netrack
12
99990
8332.5
... More
Supply and Run of No. 8 SWG copper wire including cost of all accessories and labour charges etc., complete.
25
3315
132.6
... More
Supply and fixing of VTPN DB, 4 way vertical type MCCB distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, suitable to accommodate MCCB as incomer and single/three pole MCBs as outgoings with 125A, 4 Pole MCCB adjustable, confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 25 KA with thermal magnetic release as incomer with 3No of 40/63A, 10 KA TP MCBs 'c' curve and 3 No, 6-32A, 10 kA SP MCBs 'c' curve as outgoing including making connections and labour charges etc., complete concealed in wall. Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+ and Makes for MCBs: Legrand-DX3 / Schneider-Acti9/Hager-h3
2
69658
34829
... More
Supply and Installation of 100 Pair MDF loaded with 2/10 Modular, Telephone distribution box with back mount frame, krone connector, powder coated metal body with lock and key arrangement. Makes: Krone or equivalent make.
5
27687
5537.3
... More
Supply, installation and testing of Refrigerant Piping consisting of copper tubes of wall thickness 20G/22G inclusive of Suction Gas Piping & Fittings, Liquid Line Piping & Fittings, with class "O" nitrile rubber Insulation with finish as required. The piping to be mounted & supported properly with suitable size of clamp, M.S. hanger, tray etc., as required at site. Makes:Totaline/Mandav/Mexico.
The insulation shall be closed cell/cross linked elastomeric Nitrile rubber of thickness 13/19 mm.The insulation thickness upto 19.1 mm dia pipe shall be 13 mm and above 19.1 mm dia, the insulation thickness shall be 19 mm.
Testing of refrigerant piping and procedure shall be done as per Manufacturer's recommendations 22.2 mm
300
471000
1570
... More
Supply and fixing of Ding dong bell on 6"x8" decolam block including giving connections, cost of all accessories and labour charges etc., complete.
Makes: GM / Gold Medal / Million / Vimal / Anchor
5
1776
355.1
... More
Supply and installation of Thermal insulation with 25mm thick Nitrile rubber/ XLPE with Aluminum cladding fixed to the external surface of ducts with suitable adhesives as recommended by manufacturers. (for exposed ducts) MAKE: K- flex / Supreme /Paramount / Arma flex.
50
75000
1500
... More
Supply and Fixing of Surgeon Control Panel mounted flush in the theatre wall, comprising of the following:
1 No. Day Time Clock
1 No. Elapse Time Clock
1 Set dimmer for peripheral/ planair lights
1 No. hands free telephone
1 No. Medical Gas status/ alarm
1 set indicator only for temperature and humidity display
Size - 650 x 650 x 115 mm (Make :Altos/Mercury/Arivali/ Digiline)
3
375621
125207
... More
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Roof Slab - 175mm thick2nd Floor
431
769335
1785
... More
Supply and errecting double leaf hinged door each 150 cm in width and 180 cm in height using 40 mm dia medium garde ISI mark GI pipe from all 4 sides with necessary bends and cross supports of angle iron 40mm X 40mm X 6 mm with the door leaf covered with chain links jolley 50 X 50 mm made from 3.26 mm dia/10 SWG G.I. wire with necessary flat iron covering all round with necessary no of spikes of size 10 mm dia at top and bottom at 150 mm apart to match the height of fencing. The door shall have latches and side channel of 100 X50 X5 mm regidly welded for providing locking arrangement Godrej/Navtal make medium size lock with duplicate keys, gate and fencing completely errected and painted with one coat of anticorrosive red oxide paint and 2 coats of prescribed enamel paint/silver paint, including Channel iron of size 100 X 50 mm by 2.5 mtr long, shall be provided and errected at both sides of gate. (Rate for two doors, total Gate)
2
44125
22062.3
... More
Supply and fixing of ……mm thick copper pipe thick for distribution, pipes shall be half drawn, tempered, seamless, phosphorous deoxidized, non arsenic and decreased confirming to BS 2871-1971 Part-1 (Table-X) and the chemical compositions shall be as per BS 6017 of 1981 table-2 with Lloyd Test Certification, including cost and conveyance of pipes, cost of necessary specials made of copper and suitable for a steam working pressure of 17 bar and should confirm to BS 864 with specially made for brazed socket type connections, including taxes, transportation charges including laying and jointing, testing, commissioning and all other labour charges etc. complete for finished item of workMake: IBP Conex / Maxflow 15mm O.D x0.9mm
900
765000
850
... More
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 'Footings
32
358368
11199
... More
Supply and installation, testing and commissioning of trolley mounted 6.50HP high pressure petrol driven triplex pump with hydraulic nylon pipes 3/4" dia,5mt length for suction 3/8" dia 30mt length for delivery, nozzles, values high pressure gun, fitting etc complete with all required accessories and labour charges for erection testing and transportation etc complete.Make Petrol engine: Honda, Kisan, Yamaha
5
198825
39765
... More
Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proofcompartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness,separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator).
Incomer :-Supply of 250A, 4 Pole, Adjustable, Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted. Makes: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno-1noOutgoing feeders:-Supply of 125A, 3 Pole, Adjustable, Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. Makes: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno-4noSupply of ,63A TP MCB 10KA C/D Curve ISI Mark. Makes: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno) -16 no
Metering:-Supply and Fixing of (0-500) V range Volt meter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves/channel etc., as required. Make:Conzerve/Elmeasure/ Meco/ HPL/L&T/ Socomec-1NOSupply and Fixing of CT operated direct reading type Ammeter, below 500A, on existing panel , making connection by PVC insulated copper conductor with PVC sleeves/channel etc. as required. Make: Conzerve/Elmeasure/Meco/HPL/ L&T/ Schneider/AE/ Socomec-1NOSupply and Fixing of Current Transformer, from 200 / 5 to 400/5 Ratio , 10 VA , class 1 accuracy with all necessary support in existing panel including connection etc. as required Make: Kappa/L&T/ Seimens/ C&S/ Schneider-3noSupply and Fixing of 240/220 V, LED (22.5 mm dia) Pilot lamp Red & Yellow Colour with integral circuit, terminal block, including connection etc. as required-2NOSupply and Fixing of 240/220 V, LED (22.5 mm dia) Pilot lamp Blue Colour with integral circuit, terminal block, including connection etc. as required- 1 NoSupply and Fixing of selector switch for voltmeter (4 position) including making connection etc. as required. Make: L&T / C&S/ Salzer/HPL - 2NoSupply and Fixing of CT linked selector switch of 10 A for Ampere meter (4 position) including making connection etc. as requiredMake: L&T/C&S/Salzer/ HPL- 1 No10 kA - 6-32A range SP MCBs. Make: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Crabtree-Xpro/L&T-AU -6 NoSupply and Fixing of 630A MCCB EXTENDED ROTARY HANDLE Make:L&T (DN3B, DN3 Extended ROM)-1NOSupply and Fixing of 400A MCCB EXTENDED ROTARY HANDLE Make:L&T (DN3B, DN3 Extended ROM)-2NOSupply and Fixing of 250A MCCB EXTENDED ROTARY HANDLE Make:L&T ( DN2 Extended ROM)-4NOSupply and Fixing of 125A MCCB EXTENDED ROTARY HANDLE Make:L&T ( DN0 Extended ROM)-2NOSupply and Fixing of 63A MCCB EXTENDED ROTARY HANDLE Make:L&T ( DN0 Extended ROM)-2NOBus Bars:-Supply and fixing of Electrolytic grade aluminium bus bars by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleevesFOR Main Bus Bars horizontal Phases & Neutral ((60x10x1.3x2.7)/1000) x 4 = 8.42 KgFor VERTICAL Phases & Neutral ((80x10x1.5x2.7)/1000) x 4 = 12.96 KgFor VERTICAL Phases & Neutral ((60x10x1.5x2.7)/1000) x 4 = 9.72 KgConecting Links for all MCCBs = (60x10x0.6x2.7/1000)x4x1 +(50x10x0.6x2.7/1000)x4x2 + (25x10x0.6x2.7/1000)x4x4+(25X6X0.6X2.7/1000)X4X4 = 3.88 Kg +6.48 Kg + 6.48+1.94 = 18.78 KgSub-TotalControl wiring with suitable size of approved make FRLS PVC flexible copper wires, Earth Bus Bar, Door Loop earhtings, Ferrules, Feeder identifications, danger plate, door locks etc., labour charges for errection of switch gears, panels boards, with all other accessories including all labour charges etc with connections for finished item of work @ 5%
1
344500
344500
... More
Supply, installation and testing of Refrigerant Piping consisting of copper tubes of wall thickness 20G/22G inclusive of Suction Gas Piping & Fittings, Liquid Line Piping & Fittings, with class "O" nitrile rubber Insulation with finish as required. The piping to be mounted & supported properly with suitable size of clamp, M.S. hanger, tray etc., as required at site.Makes:Totaline/Mandav/Mexico.
The insulation shall be closed cell/cross linked elastomeric Nitrile rubber of thickness 13/19 mm.The insulation thickness upto 19.1 mm dia pipe shall be 13 mm and above 19.1 mm dia, the insulation thickness shall be 19 mm.
Testing of refrigerant piping and procedure shall be done as per Manufacturer's recommendations 22.2 mm
50
78500
1570
... More
Supply and Fixing of Surgeon Double Arm Pendant - Comprising of
- 1 x Arm 800 & 1 x Arm 800 having a
- 1 x drop tube having a carrying capacity of maximum
load of 80 kg
-Rotation of 330 deg.
- 1 x Basic Console - 750 mm
- 1 x Fixed shelf (350x350x50 mm)
- 1 x Adjustable shelf (350x350x50mm)
- 6 x Mains Socket (5/15Amp)
- 6 x Medical Gas Terminal & Hose Assembly
(2 x Oxy, 2xVac, 1xAir(4bar), 1xAir(7bar), 1xN2O, 1xCO2,
Provision for CO2 Data & A/V 2 nos.)
Make : Meditech / Altos / Aravali / Digiline or Equivalent)
3
705000
235000
... More
Supply, Transportation and laying of 3 core, 2.5 Sq.mm XLPE/PVC insulated & PVC sheathed Unarmoured control cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I -1988 in the existing PVC conduit including all labour charges, giving connections etc., complete. Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel/RPG / Finolex / V-Guard
500
78000
156
... More
Supply and fixing of Remote bell including giving connections cost of all accessories and all labour charges etc., complete. Makes: GM / Gold Medal / Million / Vimal / Anchor
1
958
958.4
... More
Supply & Fixing of Duct Accoustic Insulation applied inside of the duct work with All. backed Open cell nitrile/ Cross linked foam duly fixed with adhesive and tapes
10/15 mm Thick
220
225060
1023
... More
Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete.
200
30480
152.4
... More
Preparation of all Drawings, payment of required Fees and arranging inspections and obtaining CEIG Approval.
1
35000
35000
... More
Supply and fixing of Escape signage boards in Rigid Photo luminescent based glow in Dark rigid sheet with high intensity luminous properties with specification. Makes: Cease Fire or its equivalent make Model1ES01
20
34500
1725
... More
Providing independent earthling by excavating a trench to a depth of 2.5 M in all soils, as per size specified in the Data, using 100mm dia Heavy gauge Flange C.I (Cast iron) pipe of 2.5 Mtrs length with necessary accessories duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete.
2
16616
8308
... More
Supply and Installation of 10 Pair Telephone distribution box with back mount frame, krone connector, powder coated metal body with lock and key arrangement. Makes: Krone or equivalent make.
20
21982
1099.1
... More
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Roof Beams- 2nd Floor
37
424834
11482
... More
Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 D grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & contractors profit complete for finished item of work.( APSS No.126) 1st Floor
10
908720
90872
... More
Supply and Fixing of one module PVC blanking plate (safety dummy plate for empty module) for closing the dummy blank modules in the modular switch board for ensuring safety etc., complete. Makes:- Legrand (Arteor) / Schneider (Clipsal X/ Crabtree Murano
20
478
23.9
... More
Supply & Installation, Testing and commissioning of trolley mounted, electrically operated triplex plunger pumps with 2-H.P, 1-Phase 1450 rpm, 1-phase motor with high pressure triplex pump of 5-0 kg/cmv with nylon hydraulic hose pipe of 3/4" dia, 5mt height for suction and 3/8" dia 30mt length for delivery with all required nozzles has values, high pressure gun, fittings etc with come of 3-core,2.5 Sq mm flexible copper cable with 3-pin 16A top and all required accessories and labour charges for erection, testing including transportation etc. complete, Make of motor: crompton, kiroken, texmo,suguna with ISI mark, Pump: Green tech, Kisan, Ultrajet, Pressurejet, Ambica tools, searaa or any ISI.Make of motor: Crompton, Kirloskar, Texmo, KSB,CRI, Suguna with ISI mark. Pump:Green tech,Kisan,Ultrajet, Pressurejet, Ambica tools, Seaara or any ISI
5
236460
47292
... More
Supply,transporatation & installation of following sizes of Hot Dipped Galvanized Iron perforated cable trays with cover, including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete
300mm X 50mm X 1.6mm size
50
59005
1180.1
... More
Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I)/1554-I
Makes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel
4 core, 16 Sq.mm
500
114750
229.5
... More
Supply and application of epoxy coving with 50mmx50mm width at the corners of the all walls in Operation Theatres, labour rooms including cost and conveyance of all materials and labour charges, overheads and contractor profit etc., complete for finished item of work.
(Make :SIKHA/ FOSROC/ Schomburg /BASF/ CIPY/ MYK/ TARKETT)
50
19250
385
... More
Supply & Fixing of MS structural support for mounting of Floor mounted AHU with 50 x 50 x 5 mm angle finished with Epoxy painting as per standard practice
600
37800
63
... More
Providing floor mounting stand for keeping 4No of fire bucket 1500mm length, 900mm height made out of 40x40x6mm angle iron welded with 4 hooks and duly painted with one coat of red lead and two coats of
enamel paint.
4
6049
1512.2
... More
Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI
3.5 core, 70 Sq.mm
20
14292
714.6
... More
Supply and Fixing of Epoxy Flooring: Seamless with perfectly curved resistance and dynamic loads and having conductive protection characteristics, 3 mm thick, washable Epoxy flooring and Before apply epoxy apply ESD self leveling - eletrotape copper foil /Copper grounding strips (0.05 mm thick, 50mm width) is used to create ground grids for peel and stic ESD flooring and ESD matting also ESD primer,screading and topping for self leveling.
(Make :SIKHA /FOSROC /Schomburg /BASF/ CIPY/ MYK/ TARKETT)
60
177540
2959
... More
Supply, Installation, testing and commissioning of 0 to 100 RH pressure guage Humidistate including making connections and soldering etc, complete.
Make : Honey Well / Johnson / Siemens
3
7500
2500
... More
Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I)/1554-IMakes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel
3.5 core, 25 Sq.mm
100
28060
280.6
... More
Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I)/1554-IMakes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel
4 core, 16 Sq.mm
100
22950
229.5
... More
Supply and Fixing of heavy duty 18 W LED Down lighter, suitable for recessed/surface mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltage range of 150 to 265 Volts AC, P.F 0.9, Surge protection: 2KV, THD10% with high power LED's having efficacy of 120 lumens / watt, CCT: 3000K - 5700K, minimum CRI 70, luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete including fixing in the ceiling with recessed/surface mounting, cost of all accessories and giving connections etc., complete with 5 years warranty.
a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/LG
120
184200
1535
... More
Supply and fixing of buzzer on 4"x4" decolam block including giving connections, cost of all accessories and labour charges etc., complete.
Makes: GM / Gold Medal / Million / Vimal / Anchor
2
431
215.4
... More
Fabrication, Transportation and supply of 1.5mtrs sword type or any decorative Single arm bracket with dooms either side complete with all accessories with MS galvanized 40mm / 50mm dia Pipe.Makes: Bajaj / Valmont/Laasma//Transrail/Utkarsh/ Skipper/Consoul
15
82245
5483
... More
Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308) for footings
380
49780
131
... More
Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) 2nd Floor
1851
1121706
606
... More
Supply and Transportation of XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete.
Make: Torrent / Universal / Unicab / Havells / KEI /Polycab/Gloster/RR Kabel/RPG a) 3C X 120 sq.mm
100
146700
1467
... More
Supplying and fixing of MS Gates, using MS angles, flat, square bars including cost and conveyance of all materials, cutting, bending, welding, all operational charges, labour charges, overheads and contractor profit etc., complete for finished item of work.
3147
380787
121
... More
Labour charges for run of armoured U.G cables upto 50 Sq.mm in existing cable trench/cable duct/ cable tray/hume pipe/G.I. pipe with necessary fixing arrangments such as cable ties etc., as directed by department at site.
200
9180
45.9
... More
Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete.
30
4572
152.4
... More
Supply and fixing of TPN 4 way distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, (8+12 Module) with provision to accommodate the ELCB & FP MCB as incomer and suitable for single pole outgoing MCB's in sheet steel enclosure with 63A, 10 KA breaking capacity 'c' curve 4 pole MCB with 63A, 30mA, 4 Pole RCCB as incomer and 12 No of 6 to 32A single pole, 10 KA breaking capacity 'c' curve MCBs as outgoings including making connections etc., complete concealed in wall. (POWER DB). Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+and Makes for MCBs: Legrand-DX3 / Schneider-Acti9/Hager-h3
2
34388
17194
... More
Supply and Fixing of 20mm outer dia (1.40 to 1.55)mm thicknes medium grade with IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) concealed in wall with all required MS junction boxes and all accessories including masonary work for run of mains including all labour charges etc., complete. Makes : Precision/ Universal& Marudhar/VIP /AKG
50
5855
117.1
... More
Providing 2 runs of Copper tubes for suction and liquid between indoor and outdoor unit for Split/Cassette Air- Conditioner including foaming etc., complete.Make: Copper:Totaline /Nippon /Mandev/Nitrile Insulation: Kflex/ Totaline /Armaflex 1/2" x 1/4"
20
22268
1113.4
... More
Supply and fixing of 4Nos of 9 Ltrs capacity round bottom sand buckets along with bucket sand, Fire buckets with round bottom type enamel painted, white inside & red outside and letter FIRE in black outside & Handle with mounting bracket
1
1725
1725
... More
Labour charges for run of armoured U.G cables upto 50 Sq.mm in existing cable trench/cable duct/ cable tray/hume pipe/G.I. pipe with necessary fixing arrangments such as cable ties etc., as directed by department at site.
150
5580
37.2
... More
Labour charges for run of U.G cables upto 50 sq.mm on wall with necessary fixing arrangments such as saddles, clamps etc., as directed by department including cost and conveyance of all materials etc., complete.
50
2950
59
... More
Supply,Installation,Testing and Commissioning of Electric Traction Passenger cum Stretcher/Hospital Lift of Makes:Kone/Otis/Schindler/Mitsubishi/Johnson with
• Rated capacity :- 10 Passenger/884Kg
• Floors :- G+1 floor (2 Stops / 2 Landings)
• Travel :- 6 to 7 mtrs
• Location of Lift Machine:- with Machine Room
• Rated speed :- 1.0mps VS
• Doors type :- COPO/TOPO Doors with frame having clear opening of 800 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames
• Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc.
• COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Telugu & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor.
• Clear Car size of 1400mm/1500mm wide x 1500/1600mm deep x 2200mm high
LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings
Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/ control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class • CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge
• ARD complete with necessary SMF VRLA batteries
• Fireman controller having fireman switch at fire Landing,
• Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength.This includes all necessary accessories like LOP's with UP/DN buttons arrows, indicators, extension of guide rails, shaft wiring with trunking,travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation completeFull Collective control system. The Car and Landing Doors shall have vision panel having Size 100mm wide x 200mm high covered with fire rated laminated glass, having punched Jali as a part of the door panel SS sheet itself.Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work
• Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT.
• Lift shaft available having clear size of 2550mm wide x 1950mm deep, 1800 mm Pit depth, 4800mm/4500mm Overhead from last floor FFL.
General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector (Lifts) with submission to the Engineer In Charge. Warrantee: - Job covers three years onsite warrantee for all the Lift parts with FCAMC as per the maintenance schedule.
If the l ift shaft is greater than the required size of the lift as mentioned in relevant Indian Standard [with Amendments up to date], the provision of extra steel required for erecting supports of guide rails shall be made by the department as a separate itemThe Electric power supply of 415 volts, 3 phase 4 wire,50Hz shall be made available up to Lift controller, and as per the provisions laid down in relevant The Electricity Safety Regulations 2010[with Amendments up to date], Indian Standard, relevant Rules, the separate cables for lighting and power & shall be erected through lift shaft only with 2nos distinct earth connections from lift machine & controllerThe technical specification of Lift duty motor, control panel, brakes, guide rails, and guide shoes, lift car frame, car, counter weight and suspension, lift safety gear and governor, buffer, lift doors, locking device and contacts, lift wire rope of lifts shall be as per actual requirement of the job.
For building having height of 15 mtr or more, lift shall meet the requirement of fireman lift as per the statutory requirements laid in relevant Indian Standard
1
1688670
1688670
... More
Supply and laying of 10 pair telephone wire 0.5mm copper in the existing metallic/non metallic conduit pipe with connections etc.,completeTelephone wire Makes: Finolex / Delton / Surabi / Polycab
100
6400
64
... More
Providing independent earthling by excavating a trench to a depth of 2.5 M in all soils, as per size specified in the Data, using 100mm dia Heavy gauge Flange C.I (Cast iron) pipe of 2.5 Mtrs length with necessary accessories duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete.
1
8308
8308
... More
Supply and Fixing of Oxygen Flow meters with Humidifier Bottles.Makes: Aktiv Technologies// Atlas Capco/ Draeger Medical/ / Airox Technologies / Aastha Medical technologies/ GMP Technical Solutions / Medicare gas pipe line/Mediline Engineers
20
31820
1591
... More
Supply and fixing of Fire bucket stand fabricated by M.S. angles to install for Four numbers of buckets as per local fire officers standards
1
2156
2156
... More
Supply and run of 5 of 6 Sq mm (phases, neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for circuits including labour charges etc. complete as required for run of mains from Lighting panel board to TPN DB'S with pin type lugs and connections. [for LDBs] Makes of wires:- Finolex / RR kabel/ Havells.
500
228500
457
... More
Supply and fixing of ……..consisting of all necessary accessories ie pressure sensors, regulators, pressure SWGs etc. complete including cost and conveyance of all materials, taxes, transportation charges etc. complete for finished item of work.Make: IBP Conex / Maxflow 4 Gas Digital Alarm Panel
2
65328
32664
... More
Supply and Fixing of Anesthesia Single Arm Pendant - Comprising of
- 1 x Arm 800 mm having a
- 1 x drop tube having a carrying capacity of maximum
load of 80 kg
-Rotation of 330 deg.
- 1 x Basic Console - 600 mm
- 1 x Fixed shelf (350x350x50 mm)
- 1 x Adjustable shelf (350x350x50mm)
- 6 x Mains Socket (5/15Amp)
- 6 x Medical Gas Terminal & Hose Assembly
(2 x Oxy, 2xVac, 1xAir(4bar),1xAir 7 Bar,1x N20 , Provision for
AGSS, Data & A/V 2 nos.)
( Make : Meditech / Altos / Aravali / Digiline or Equivalent)
3
525000
175000
... More
Cutting road surface including stacking of excavated materials for UG Cable trench work.
b) Cutting open C.C. road surface with concrete saw cutter and removal with Breaker
10
37391
3739.1
... More
Supply and Installation of GI backdraft dampers as per UL 555 Standard,
5
50595
10119
... More
Extra copper piping, cable including thermal insulation faoming include cable for Hi wall split Air conditioners.
250
137500
550
... More
Supply, installation and testing of UPVC Drain piping with 6mm Nitrile Rubber class "O" Insulation covered with interwoven glass cloth protection. Necessary pipe fittings(Including enlarger, bends, T Joints etc) has to be considered to connect the UPVC drain pipe to cast iron floor trap. 25 mm dia
50
10680
213.6
... More
Supply and fixing of 4 No of 6A (ISI marked) modular type switches with 4 No of 6A, 3/2 pin modular type sockets with cover plate on suitable hot dip galvanized 20/18 SWG MS modular metal switch box with earthing terminal including all labour charges, giving all connections etc., complete for LABs & Computer Use. Makes of switches/sockets:- Legrand (Arteor) / Schneider (Clipsal X)/ Crabtree Murano
25
54300
2172
... More
Supply and Run of 25mm x 6mm copper strip including cost of all accessories and labour charges etc., complete.
10
12533
1253.3
... More
Supply and Transportation of Ductable Split Airconditioners with scroll compressor (multiple numbers) including electrical panel with scanner for phase sequence under voltage, over and single phase preventor ON/OFF indicators for compressor and initial charges of Refrigerant gas and oil as required with copper condensing units. Make : Mitsubishi /DAIKIN/Toshiba/ O General/Blue star/Hitachi/Carrier
a. 11.0 Ton
15
2610000
174000
... More
Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) in existing pipe with 6A Modular switch (ISI marked) with cover plate, Ceiling rose/BH/ SBH, including all labour charges etc., complete for Light, Bell, Fan and Exhaust Fan points etc., complete. (for Non Residential Building).
Makes of wires:- Finolex / RR kabel/Havells. Makes of switches:- Legrand (Arteor) / Schneider (Clipsal X/ Crabtree Murano
150
128100
854
... More
Supply, installation, testing& commissioning of GSS Ducting with required angle flanges & installation materials such as heavy duty supports by anchor fasteners etc as required asper IS 655 /SMACNA Standards.Makes:TATA/Jindal 24 G
350
415100
1186
... More
Supply and fixing of Kit for conversion of Nitrous Oxide consisting high pressure pin index tube with connecting pin including cost and conveyance of materials, taxes, transportation charges and labour charges for fixing etc. complete for finished item of work.
5
16000
3200
... More
Supply, Installation, Testing and commissioning of extruded Aluminum powder coated grills/ diffusers for supply with removable core type with collar damper
50
610850
12217
... More
Supply and Fixing of the following 2 mm thick Hard UPVC drain piping with suitable supports as required & insulated with 6mm thick Nitrile rubber insulation. Approved Makes: Sudhakar, Supreme or equavalent
a) 25 mm
250
42500
170
... More
Providing dadooing with glazed full body porcelain wall tiles of size 300mm x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved pattern as approved by Engineer-in-Charge flushed to wall surface set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item of work.
300
413700
1379
... More
Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete.
100
2790
27.9
... More
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Columns-2nd Floor
18
256140
14230
... More
Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I)/1554-IMakes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel
3.5 core, 35 Sq.mm
100
34770
347.7
... More
Supply and fixing of louver shutter suitable for 12" Exhaust fan including all labour charges etc complete with connections and colouring matching to the wall with enamel paint.
50
14835
296.7
... More
Supply and fixing of ……mm thick copper pipe thick for distribution, pipes shall be half drawn, tempered, seamless, phosphorous deoxidized, non arsenic and decreased confirming to BS 2871-1971 Part-1 (Table-X) and the chemical compositions shall be as per BS 6017 of 1981 table-2 with Lloyd Test Certification, including cost and conveyance of pipes, cost of necessary specials made of copper and suitable for a steam working pressure of 17 bar and should confirm to BS 864 with specially made for brazed socket type connections, including taxes, transportation charges including laying and jointing, testing, commissioning and all other labour charges etc. complete for finished item of workMake: IBP Conex / Maxflow 42mm O.Dx1.2mm
125
566625
4533
... More
Supply, Installation, Testing and Commissioning of indoor type floor mounted metal clad, Switchgear Panel enclosure of sheet steel preferably Aluzinc, dust tight, vermin proof, totally enclosed cubicle floor mounting, free standing type with single break, horizontally draw out type breaker with trip free mechanism as per latest standard i.e. IS/IEC 62271-200 as amended up to date and as per Technical specifications, IP4X for VCB Panel enclosure. Switchgear Panel shall be electrically & mechanically interlocked as per IEC 62271-1, full voltage insulated copper Busbar with heat shrinkable sleeving, complete with suitable metering & protectiondevices, breaker featured with mechanical ON-OFF indicator with hand trip device and all accessories such as shunt trip coil, motorized & manually operated spring charging mechanism, emergency trip push buttons, auxiliary switch of 2NO + 2NC, interconnections, space heaters, panel earthing etc. and equipped with following switchgear and accessories including connection suitable for 3x185 to 3x 400 Sq mm XLPE 11kV cable (cable entry from bottom) to be connected through heat shrinkable jointing material etc., as required. (Note - Cost of end termination not included in this item.)
Makes:ABB/Schneider/Seimens/Kirlos kar/Amara Raja/Megawin/L&T INCOMER /OUTGOINGS 1 No. each comprising the following
1 No. 800 Amp. VCB. 26.3KA
1 No. Integral Earth switch for line side earthing
3 No. dual core CTs 600A/1/1A of 7.5VA burden max and accuracy Class 0.5 for metering and class 5P10 for protection
3 No. Cast Resin 11000V/v3/110V/v3/110V/v3 PT Class 0.5/3P accuracy and 30VA burden max with and protection fuses / MCB.
1 No. Digital voltmeter with selector switch
1 No. Digital Ammeter with selector switch
1 No. Microprocessor based numerical relays with O/L, E/F and S/C protection with Integrated Arc sensing feature along with trip/lockout / anti-pumping / aux. relays.
1 No. Multi-function meter
Set of MCBs for Panel AC/DC
Set of MCBs for Main AC/DC
Set of Indication lamps LED types
TNC Switch, L-R Switch, Pushbuttons for ON-OFF 11 KV 800A VCB Panel with 3 Nos. VCBs suitable for 50Hz 3-phase system, suitable for 26.3kA/3sec short circuit withstand capacity & 26.3kA/1sec Internal Arc capacity
1
1813728
1813728
... More
Providing independent earthing for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia G.I Pipe of 2.5 mtr length connected with reducer providing G.I funnel with wiremesh as per National Electric Code including C.C.Chamber of size 400m x 400m x 400mm covered with R.C.C. Slab filling with salt and charcoal giving earth connection from electrode with Copper strip of 25mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to Copper strip with all accessories and labour charges complete as per IS specification 732/1982 (Part II).
1
21005
21005
... More
Supply & Fixing of Cisco small business 8 port Gigabit POE Managed Switch with 2 SFP slots. Make & Model: CISCO CBS350-8P-E-2G or equivalent in Juniper/Extreme
1
30114
30114
... More
Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I)/1554-IMakes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel
3.5 core, 95 Sq.mm
100
77260
772.6
... More
Supply and Run of 40mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete
100
22000
220
... More
Supply and Run of 40mm x 6mm copper strip including cost of all accessories and labour charges etc., complete.
100
198220
1982.2
... More
Labour charges for run of U.G cables upto 50 sq.mm on wall with necessary fixing arrangments such as saddles, clamps etc., as directed by department including cost and conveyance of all materials etc., complete.
100
5900
59
... More
Supply and Fixing of Vacuum Tube.Makes: Aktiv Technologies// Atlas Capco/ Draeger Medical/ / Airox Technologies / Aastha Medical technologies/ GMP Technical Solutions / Medicare gas pipe line/Mediline Engineers
20
1020
51
... More
Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF0.9, Surge protection: 2KV,THD15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI70, .etc., complete including fixing on wall / Ceiling with PVC/TW round blocks with all accessories including giving connections and all labour charges etc., complete with 5 years warranty.
a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ Everlight.
250
194500
778
... More
Supply and Installation of 400A FP, MCCB, 35/36KA on wall with suitable sheet steel enclosure with cable end boxes on angle iron frame work including all labour charges, massonry work etc complete with connections. Make: Makes: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno
4
169096
42274
... More
Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI
3.5 core, 25 Sq.mm
10
3102
310.2
... More
Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI
3.5 core, 35 Sq.mm
4
1650
412.4
... More
Supply and Fixing of of 16A/6A, 2 in one, modular type power socket outlet with 16A switch (ISI marked) modular type and 1 No of 6A modular type sockets with 6A modular type (ISI marked) switch control with front cover plate on hot dip galvanized 20/18 SWG MS modular metal switch box with earthing terminal including all labour charges, giving all connections etc., complete with following configurations.
1) 16A Socket - 1 No 2) 16A Switch - 1 No 3) 6A socket - 1 No. 4) 6A switch - 1 No Makes of Switches/Sockets:- Legrand (Arteor) / Schneider (Clipsal X)/ Crabtree Murano
200
321400
1607
... More
Earth work excavation of Trench in hard ground soil, laying of U.G cables from 70 to 300 Sqmm on sand cushion covering the cable with bricks and back filling of trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.
1500
730800
487.2
... More
Providing CTPT plinth 600mm x 600mm x 2.1 mtr in size with necessary excavation in ground at the bottom with 150mm thick 1:2:4 cement concrete raft at the bottom and top duly plastered 20mm thick outsides including watering etc., complete.
1
8248
8248.4
... More
Supply and transportation of ......... LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated,having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F 0.90, high power LED's System efficacy 100lm/W and junction temprature 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, Driver surge protection 4KV, external Surge protection ≥
10KV with wide/ Narrow beam optics, THD10% at 110 Volts AC, driver efficiency 90%, , CCT: 3000K - 5700K, minimum CRI70, etc., complete
a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture / Crompton/ Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.
6
110238
18373
... More
Supply, Installation, Testing and commissioning of extruded Aluminum powder coated grills/ diffusers for return with removable core type without collar damper
50
445550
8911
... More
Supply, fabricating , installing structural steel supports for fixing all sizes of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts,washers etc complete with painting.
50
4650
93
... More
Supply and laying of 100 pair telephone wire 0.5mm copper in the existing metallic/non metallic conduit pipe with connections etc.,complete for telephone wiring. Makes: Finolex / Delton / Surabi / Polycab
100
52670
526.7
... More
Supply and fixing of…… Isolation Valves with necessary brass end fittings designed for a working pressure of 300 psi / 27 inc. Hg. Vacuum, Non Ferrous, Non Lubricated with 90 degrees turn, Hand lever operated of standard make of valves including cost and conveyance of all materials, taxes, transportation charges, fixing charges and testing charges and all labour charges etc. complete for finished item of workMake: IBP Conex / Maxflow 22 mm Valves (3/4")
25
50650
2026
... More
Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete.
300
8370
27.9
... More
Supply and Transportation of 12" (300mm) Light duty exhaust fan with metalic blades and wire guard etc complete.
Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air- DSP / Orient hill air
20
40424
2021.2
... More
Supply and fixing of ……mm thick copper pipe thick for distribution, pipes shall be half drawn, tempered, seamless, phosphorous deoxidized, non arsenic and decreased confirming to BS 2871-1971 Part-1 (Table-X) and the chemical compositions shall be as per BS 6017 of 1981 table-2 with Lloyd Test Certification, including cost and conveyance of pipes, cost of necessary specials made of copper and suitable for a steam working pressure of 17 bar and should confirm to BS 864 with specially made for brazed socket type connections, including taxes, transportation charges including laying and jointing, testing, commissioning and all other labour charges etc. complete for finished item of workMake: IBP Conex / Maxflow 22mm O.D x0.9mm
900
1412100
1569
... More
Providing & Fixing of Scientific Doorswithmetal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120GSM)coated with ZincPhosphate Primer to receive any paint on site or finishedwith ThermosettingPolyurethane paint ofAliphatic Grade providing high levels ofscratch resistance and durability/Epoxypolyester powder for powder coatingpaint thickness 50-60 microns (Dry filmthickness) outer frame section of 100 x58 mm x 1.2 mm thick, shutter section of0.80 mm thick galvanized steel sheetpressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill ofhoneycomb kraft paper used to give the required rigidity and effective acoustic insulationwith 6” Tower bolt – 1 No., 6” D handles– 2 Nos., 10” Aldrop – 1 No., Butt Hinges– 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of selfexpanding screws complete forfinisheditem of work for Single leaf Door
15
2165235
144349
... More
Supply and application of epoxy flooring of light green or light blue colour in Operation Theatres and labour rooms - seamless joint free finish with 3mm thickness and anti slip & water washable chemical resistance durable and non particle shedding with attractive finishing including cost and conveyance of all materials and all labour charges, overheads and contractor profit etc., complete for finished item of work.
(Make :SIKHA/FOSROC /Schomburg /BASF/ CIPY/ MYK/ TARKETT)
50
97000
1940
... More
Supply and Laying NP2 class RCC hume pipe with collars of following sizes for laying at the road crossings for the UG cables.
300 mm dia Hume pipe
25
19085
763.4
... More
Supply, Installation, Testing & Commissioning of Dust and Vermin proof (Resettable) addressable analogue Manual call boxes along with Isolators inbuilt having front reset mechanism with 170° viewable LED and can be viewed from the distance of 7 M. also have inbuilt isolator having operating temperature from -40°C-70°C to initiate audio visual alarm in case of Human detection of fire. The manual call point must be indoor type with IP 44 rating.The call point must be ressatable type without breakglass.Makes: Notifier / Edwards/Bosch
10
64680
6468
... More
Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required.
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / SANT/NEU-G/Honeywell//Kartar
100mm dia
1
4659
4659
... More
Supply and Fixing of Writing Board of size 950 x 650 x 75 mm with 50 mm thick and consealed in wall panelling ( Make : CZS /BLS / Altos / Srimodular / Mediconz or equivalent)
3
30000
10000
... More
Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proofcompartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness,separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator).
Incomer :-400A Four Pole, MCCB of adjustable, confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted. Makes: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno-1noOutgoing feeders:-Supply of 250A, 3 Pole, Adjustable, Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted. Makes: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno-3noSupply of 63A/60A, 3 Pole, Adjustable, Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 16 KA with thermal magnetic release Panel Mounted. Makes: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno-5noSupply Installation Testing and commissioning of self healing MPP/MP type shunt capacitor (banks) conforming to IS:13340-41 / IEC :831-1&2 in existing panel or parallel with load terminals , the capacitor shall be fitted with discharge resistors, pressure sensitive disconnector ( PSD ) and shall have dissipation factor less than 0.0025 at 50 Hz and total wattage loss less than 0.5 Watt per KVAR. including making connections with suitable capacity conductors/cables testing as required Heavy duty Three phase 440 V , 50 Hz capacitor (Bank). Makes:L&T/Seimens/Epcos/Schneider/Havells-200 KAVRSupply and Fixing of 440 Volt 3 pole capacitor (AC 6 B ) duty contactor with 3 no. early make and post break auxiliary contacts in series with quick discharge damping resistors/ reactors to limit the inrush current ,conforming to IS:13947-4-1/IEC:947-4-1, Din rail mounting type ncluding making onnections, testing etc. as required.suitable for 7 to 10 KVAR capacity capacitor bank. Make:Seimens/ABB/Schneider/L&T/C&S/HPL/Havells - 1 NoSupply and Fixing of 440 Volt 3 pole capacitor (AC 6 B ) duty contactor with 3 no. early make and post break auxiliary contacts in series with quick discharge damping resistors/ reactors to limit the inrush current ,conforming to IS:13947-4-1/IEC:947-4-1, Din rail mounting type ncluding making onnections, testing etc. as required. suitable for 11 to 20 KVAR capacity capacitor bank. Make:Seimens/ABB/Schneider/L&T/C&S/HPL/Havells - 2 NoSupply and Fixing of 440 Volt 3 pole capacitor (AC 6 B ) duty contactor with 3 no. early make and post break auxiliary contacts in series with quick discharge damping resistors/ reactors to limit the inrush current ,conforming to IS:13947-4-1/IEC:947-4-1, Din rail mounting type ncluding making onnections, testing etc. as required.suitable for 30 KVAR capacity capacitor bank. Make:Seimens/ABB/Schneider/L&T/C&S/HPL/Havells- 5 NoMetering:-Supply and Fixing of (0-500) V range Volt meter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves/channel etc., as required. Make:Conzerve/Elmeasure/ Meco/ HPL/L&T/ Socomec - 1NoSupply and Fixing of CT operated direct reading type Ammeter, above 500A, on existing panel , making connection by PVC insulated copper conductor with PVC sleeves/channel etc. as required. Make: Conzerve/Elmeasure/Meco/HPL/ L&T/ Schneider/AE/ Socomec - 1 NoSupply and Fixing of Current Transformer, from 200 / 5 to 400/5 Ratio , 10 VA , class 1 accuracy with all necessary support in existing panel including connection etc. as required Make: Kappa/L&T/ Seimens/ C&S/ Schneider-3 noSupply and Fixing of 240/220 V, LED (22.5 mm dia) Pilot lamp Red & Yellow Colour with integral circuit, terminal block, including connection etc. as required-16 noSupply and Fixing of 240/220 V, LED (22.5 mm dia) Pilot lamp Blue Colour with integral circuit, terminal block, including connection etc. as required- 1 NoSupply and Fixing of selector switch for voltmeter (4 position) including making connection etc. as required. Make: L&T / C&S/ Salzer/HPL - 1 NoSupply and Fixing of CT linked selector switch of 10 A for Ampere meter (4 position) including making connection etc. as requiredMake: L&T/C&S/Salzer/ HPL- 1 NoSupply and Fixing of Cam operated rotary switches on existing panel with 2 way and off position one pole, 32A. makes: L&T (SALZER)/ABB/Schneider/Seimens/C&S/HPL-7noSupply and Fixing of Non-Luminious type, push button actuators and integral contact block of dia. 22.5 mm including making connection etc. as requiredMake:Seimens/ ABB/Schneider/L&T/C&S/HP-14 no10 kA - 6-32A range SP MCBs. Make: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Crabtree-Xpro/L&T-AU - 6 NoSupply Installation Testing and commissioning of microprocessor based intelligent power factor correction relay having sensitivity up to 50 milli Amp secondary current and following way, self analysing auto c/k setting according to targeted power factor setting, the relay shall have minimum three digit display unit for display of real power factor, targeted power factor, lag/lead capacitor switching status, alarm output for under current, over current, insufficient compensation, indication of switching on units, auto/manual status, and shall have over load protection, no volt release etc. as required, 6 to 14 stage - sensitivity upto 50 milli Amp. Makes: L&T/Seimens/Epcos /Schneider/ ABB/Neptune - 1 NoBus Bars:-Supply and fixing of Electrolytic grade aluminium bus bars by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleevesFor Phases & Neutral ((30x12x1.5x2.7)/1000) x 4 = 5.83 KgLinks for outgoing MCCBs ((25x8x0.3x2.7)/1000) x 3 x 5 = 4.86 Kg Provision for ventilating fans for the CapacitorsControl wiring with suitable size of approved make FRLS PVC flexible copper wires, Earth Bus Bar, Door Loop earhtings, Ferrules, Feeder identifications, danger plate, door locks, auxilary contactors for auto manual operation and all other accessories including all labour charges etc with connections for finished item of work including transportation charges @ 5%
1
369160
369160
... More
Supply, Installation, Testing and commissioning of IP Gateway Card and SIP Extension License ( IP Extensions 8 ) etc., complete.
1
47150
47150
... More
Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1993 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall top coat including overheads and contractor profit etc., complete for finished item of work
4000
4944000
1236
... More
Supply,Installation,Testing and Commissioning of Electric Traction Bed cum Stretcher cum Passenger Lift of Makes:Kone/Otis/Schindler/Mitsubishi/Johnson with
• Rated capacity :- 20 Passenger/1360Kg
• Floors :- G+ 1 floor (2 Stops / 2 Landings)
• Travel :- 6 to 7 mtrs
• Location of Lift Machine:- with Machine Room
• Rated speed :- 1.0mps VS
• Doors type :- COPO/TOPO Doors with frame having clear opening of 1200 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames
• Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc.
• COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Telugu & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor.
• Clear Car size of 1300mm/1400mm wide x 2400mm deep x 2200mm highLOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings
Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/ control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class • CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge
• ARD complete with necessary SMF VRLA batteries
• Fireman controller having fireman switch at fire Landing,
• Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strengthThis includes all necessary accessories like LOP's with UP/DN buttons arrows, indicators, extension of guide rails, shaft wiring with trunking,travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation completeFull Collective control system. The Car and Landing Doors shall have vision panel having Size 100mm wide x 200mm high covered with fire rated laminated glass, having punched Jali as a part of the door panel SS sheet itself.Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work
• Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT.
• Lift shaft available having clear size of 2400mm wide x 3000mm deep, 1800 mm Pit depth, 4800mm/4500mm Overhead from last floor FFL.
General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector (Lifts) with submission to the Engineer In Charge. Warrantee: - Job covers three years onsite warrantee for all the Lift parts with FCAMC as per the maintenance schedule.
If the l ift shaft is greater than the required size of the lift as
mentioned in relevant Indian Standard [with Amendments up to date], the provision of extra steel required for erecting supports of guide rails shall be made by the department as a separate itemThe Electric power supply of 415 volts, 3 phase 4 wire,50Hz shall be made available up to Lift controller, and as per the provisions laid down in relevant The Electricity Safety Regulations 2010[with Amendments up to date], Indian Standard, relevant Rules, the separate cables for lighting and power & shall be erected through lift shaft only with 2nos distinct earth connections from lift machine & controllerThe technical specification of Lift duty motor, control panel, brakes, guide rails, and guide shoes, lift car frame, car, counter weight and suspension, lift safety gear and governor, buffer, lift doors, locking device and contacts, lift wire rope of lifts shall be as per actual requirement of the job.
For building having height of 15 mtr or more, lift shall meet the requirement of fireman lift as per the statutory requirements laid in relevant Indian Standard
1
2561050
2561050
... More
Supply, Installation, testing and Commissioning of NetLink License per remote node
1
88755
88755
... More
Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I)/1554-IMakes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel
3.5 core, 70 Sq.mm
200
123840
619.2
... More
Earth work excavation of Trench in hard ground soil, laying of U.G cables upto 50 Sq,mm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.
400
109400
273.5
... More
Supply, Transportation, Installation, Testing and Commissioning of the following actual capacity at 45°C ambient Outdoor Condensing Units-Inverter type suitable to operate upto 52°C ambient temperature with minimum one variable speed inverter scroll compressor. Matching air-cooled condenser with copper tubes and aluminum fins duly covered by anti-corrosion and hydrophilic resin film. Scroll compressors suitable for operation with R 410A. Unit with all necessary safety devices like high/low pressure cut-outs, fan motor thermal overload protector, over current/low current safety, fuses etc. Suitable for operation on 80V~415V,3Ph~50Hz A.C. supply. Oil separator and accumulator to be provided for inverter compressors and with copper condensing units.Makes: Mitsubishi /DAIKIN/Toshiba/O General/ LG/Voltas/Blue star/Hitachi/Carrier/Samsung
11 TR
3
497634
165878
... More
Supply, Installation, Testing and commissioning of Digital key Telephone instruments with at least of 16 programmable keys, LCD display, fully hands fee etc., complete with connectors. Makes: NEC/ Alcatel /Avaya/Seimens
4
66804
16701
... More
Supply, Installation, Testing and Commissioning of IP Based digtal Telephone (EPABX) system--
complied with following specifications: IP @ Core, PCM/TDM switching, Non blocking, Must Support PRI, E1, Analog Junctions Must Support PC Console, Must support Mobile SIP (Android and IOs) Must support Voice Mail Must support Card based GSM Inbuilt Call Details Software with search engine software 8 Analog Trunks 1 PRI Trunk module 8 Digital Extensions 128 Analog Extensions 1 Digital Key Phone with minimum 16 Keys (Must work only on 2 wires) Expandable to 220 Ports wired or more at extra cost
Makes: NEC/ Alcatel /Avaya/Siemens
1
496282
496282
... More
Supply and Laying NP2 class RCC hume pipe with collars of following sizes for laying at the road crossings for the UG cables.
150 mm dia Hume pipe
10
3773
377.3
... More
Supply and Fixing of SS/GI Perforated air Grills with AL VCD as per standard practice. Approved Makes: Airmaster, Systemair, carryair or equavalent
3
34560
11520
... More
Supply and Fixing installation testing and commisioning of1no of Cat-6 Tooless built-in crimping mechanism Information Outlet with Dust Cover Exceed ANSI/TIA-568-C.2 and ISO/IEC 11801 standards with 1module face plate for Category 6 component performance & Compatible to T568A,T568B wiring pattern and UL-940V0 Rated Plastic &RoHS Compliant. Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand
400
236320
590.8
... More
Supply and Run of 25mm x 6 mm copper strip including cost of all accessories and labour charges etc., complete.
200
250660
1253.3
... More
Supply, Transportation and Laying of the following sizes of double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Makes:DURA LINE (Dura Guard) or its equivalent make.
Outer dia 78mm and Inner dia 63mm
30
6336
211.2
... More
Supply and fixing of…… Isolation Valves with necessary brass end fittings designed for a working pressure of 300 psi / 27 inc. Hg. Vacuum, Non Ferrous, Non Lubricated with 90 degrees turn, Hand lever operated of standard make of valves including cost and conveyance of all materials, taxes, transportation charges, fixing charges and testing charges and all labour charges etc. complete for finished item of workMake: IBP Conex / Maxflow 15 mm Valves (1/2")
50
65350
1307
... More
Supply and fixing of ABC stored pressure squeeze grip type fire extinguishers, 9 kg capacity, IS:15683 : 2006, filled with ABC Mono Ammonium Phosphate base powder-90 complete with discharge hose and wall mounting bracket, 2mm Mild Steel, EPDM Rubbers, Pressure Gauge, which work effectively on all class of fires (A, B, C & Electrical fires) with 5 years warranty Including transportation, all taxes and all labour charges etc complete Makes : Cease Fire / Minimax
4
59268
14817
... More
Supply and fixing of 16A/6A, 2 in one, modular type socket with 16A switch (ISI marked) modular type with cover plate on existing modular metal switch box including all labour charges, giving all connections etc., complete.
Makes of Switches/Sockets:- Legrand (Arteor) / Schneider (Clipsal X)/ Crabtree Murano
20
10590
529.5
... More
Fabrication, transportation and supply of 12 Mtrs Polygon High Mast with single section of 3mm thick of Bottom 360mm and Top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 520mm dia 16mm thick with its accessories. Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suiatble for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections and single speed motor with M24 x 800 mm foundation bolts of required quantity, suitable for 6 luminaires with LED type aviation twin lamp.
Makes: Bajaj / Valmont/Transrail
1
140411
140411
... More
Supply of pair of rubber hand gloves suitable for working voltage of 11/22 KV supply.
20
5500
275
... More
Supply Installation, testing and commissioning of 60 to 100 degrees F heat Thermostat including making connections and soldering etc, complete.
Make: Honey Well / Johnson / Siemens
3
7500
2500
... More
Supply of round bottom G.I sheet bucket of 9 Ltrs Capacity as per IS:2546 made out of 24 gauge GI sheet with extra handle at bottom duly painted inside and red out side with printed with FIRE Mark for stand and hook and filled with sand and arranged to existing stand or hook.
16
5944
371.5
... More
Supply and Fixing of 25mm outer dia (1.60 to 1.80)mm thicknes medium grade with IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) concealed in wall with all required MS junction boxes and all accessories including masonary work for light, bell, fan, and separate plug point with hot dip galvanized 20/18 SWG MS modular metal switch box with earthing terminal including all labour charges etc., complete. Makes : Precision/Universal& Marudhar/VIP/AKG
500
66850
133.7
... More
Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges , overheads & contractor profit etc., complete Reinforced cement concrete
6
20616
3436
... More
Supply and fixing of 16 Port Analog Extension Module etc., complete.
Makes : NEC/ Alcatel /Avaya/Siemens
2
45218
22609
... More
Earth work exacavation with a approximate quantity of 4.0 Cum for errection of 12 Mtrs high mast and refilling with a quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M 20 grade concrete and (80 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including
labour charges for errection of High Mast and Carraige etc
complete.
1
47916
47916
... More
Supply installation testing and commisioning of 4 pair 23AWG Cat-6 UTP, flexible, double ended patch cords along with 2 nos of RJ 45 connectors with strain relief boots compatible to T568A,T568B specifications including making connections to information outlets of length - 1mtr/3 ft
Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand
400
114960
287.4
... More
Flooring with non-skid Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707) 2nd Floor
616
875336
1421
... More
Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI
4 core, 6/10/16 Sq.mm
60
18948
315.8
... More
Supply, Transportation and Laying of the following sizes of double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Makes:DURA LINE (Dura Guard) or its equivalent make.
Outer dia 63mm and Inner dia 51mm
100
17620
176.2
... More
Supply, Transportation, Installation, Testing and Commissioning of the following Inverter model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidigation.
1.5 TR 5 star capable of delivering 18000 BTU/hr and above with operating on refrigerant R-32/ R-410A, COP not less than 4.5. Makes: Mitsubishi / O General /Toshiba (prevailing models in the market)
5
366898
73379.5
... More
White washing two coats with white cement to ceiling to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials , labour charges and incidental such as scaffolding , lift charges etc., and overheads & contractors profit complete for finished item of work in all floors.
490
25480
52
... More
Supply &Fixing of Duct Thermal Insulation applied outside of the duct work with All. backed Closed cell nitrile/ Cross linked foam duly fixed with adhesive and tapes
a) 13 mm Thick
220
183480
834
... More
Supply and Run of 75mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete
100
38030
380.3
... More
Supply, Transportation and Laying of the following sizes of double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Makes:DURA LINE (Dura Guard) or its equivalent make.
Outer dia 50mm and Inner dia 38mm
50
7050
141
... More
Supply, fabrication, transportion and erection of MS Chequered Plates of 5mm thick, with 40mm x 40mm x 6mm thick MS angle supporting frame welded to the plate all around with lifting handles including painting of angle iron supporting frame and chequered plate with red oxide paint and bitumen paint of black colour and fixing on the cable ducts/trenches over the existing MS Frame work in the sub-station building/electrical power room including cost and conveyance of all materials and all labour charges etc complete.
10
53672
5367.2
... More
Supply, Installation, Testing and Commissioning of double skin horizontal floor mounted air handling unit of recirculation type having mixing box with fresh air & return air manually operated AL dampers. Fresh air inlet should have back draft dampers along with AL manually operated fresh air dampers. Units shall be with a minimum of 80mm GI base channel. The panel thickness should be 46+/-2mm having thermal break AL profile. Outer skin of the unit should be 0.6mm pre-coated GI sheet & Inner skin should be 0.8mm AL. All internal blank off should be GI. Filter section with 90% efficiency down to 10-micron prefilter box type followed by 95% efficiency down to 5-micron Microvee filter in a separate filter frame. The cooling coil section should be 6 or 8 Row Deep Direct Expansion intertwining cooling coil compatible for Mitsubishi /DAIKIN/Toshiba/O General/ Blue star/Hitachi/Carrier outdoor unit.
Fin thickness should be 0.15mm & fin spacing should be 12 FPI. Coil casing should be GI & fin shall be with standard fin material. Coil shall be 18G SS-304 drain pan with 13mm thick closed cell nitrile rubber insulations. Unit shall be ultraviolet lamp to kill germs/fungus. The heater section should be with 4kW electric strip heater in 2 banks. The fan section should be SISW direct driven plug fan with a minimum efficiency of 65%. Motors should be IE-2, TEFC squirrel cage induction type with IP-55 protection, 415V, 3Phase & 50Hz. The motor drive should be VFD. VFD drive should be included in AHU supply. Fan should be housed over the spring isolator. Units should be supplied with manually operated AL dampers. The AHU package should include Electronic expansion valves compatible to condensing units, Temperature sensor and controller compatible to inverter drive, communication cables from AHU to condensing unit etc., including cost of all accessories and all labour charges, transportation etc., complete.
Makes:- 1. FAN – KRUGER / ZIEHL-ABEGG 2. MOTORS – ABB/SIEMENS/BBL 3. FILTERS – CAMFIL/THERMADYNE 4. VFD DRIVE - DANFOSS / ABB 5. AHU - EDGE TECH / ZRCO/ CITIZEN/ BOOPATHY 4000 cfm 4.5" static
3
766902
255634
... More
Supply and fixing of Co2 type Fire Extinguishers 4.5 Kg capacity confirming to IS 2878 made from ISI marked steam less cylinder confirming to IS:7285 & CE certified and fitted with ISI marked controlled valve confirming to IS:3224, high pressure 1 Mtr discharge hose & horn complete with initial gas charged with carrying handle with wheels and wall mounting bracket. Squeeze lever discharge, used un-used indicator, Aphoxy coated paint (Red) with 93% gloss with 2 years warranty Including transportation, all taxes and all labour charges etc complete.
Makes : Cease Fire / Minimax
2
32560
16279.9
... More
Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges , overheads & contractor profit etc., complete Brick masonry
15
4875
325
... More
Supply, transportation and fixing of MS Angle Iron of size 50 x 50 x 6 mm for fixing as frame work MS chequered plates around the cable ducts duly grouted in flooring with C.C. in the sub-station building/electrical power room including including painting with red oxide paint and bitumen paint of black colour and cost and conveyance of all materials and all labour charges etc complete.
50
23020
460.4
... More
Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI
3.5 core, 185 Sq.mm
30
41241
1374.7
... More
Supply ,installation, testing and commissioning of 24 port Managed Switch with 4 SFP slots Make & Model: CISCO CBS 350-24T-4G-IN or equivalent in Juniper/Extreme
2
98636
49318
... More
Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 D grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & contractors profit complete for finished item of work.( APSS No.126) 2nd Floor
40
3705400
92635
... More
Supply and Laying NP2 class RCC hume pipe with collars of following sizes for laying at the road crossings for the UG cables.
150 mm dia Hume pipe
25
9433
377.3
... More
Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm with split type fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars and ISI marked flush door shutter of 30mm thick double shutters with bond wood solid block board type core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides, fixing 1mm thick mat finish laminated sheet to full width and height of the flush shutter both sidesincluding cost and conveyance to site of teak wood frame, flush shutter, laminate sheet including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc, including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1200mm x 2600mm)
25
139650
5586
... More
Supply and fixing of Cable adopter/Cable end box with cover suitable for 4-way/8-way VTPN MCCB DBs with IP-43 protection including, massanory work etc., complete for concealed mounting. Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+
2
7610
3805
... More
Supply and Transportation of XLPE/PVC insulated & PVC sheathed armoured cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I -1988 etc complete Make: Torrent / Universal / Unicab / Havells / KEI /Polycab/Gloster/Orbit/Paragon/RRKabel/RPG/Rhino/Pawancab/LS cable
2 C x 1.5 sq.mm
500
63500
127
... More
Wiring with 2 of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) in existing pipe with 2 No of 6A (ISI marked) modular type switches and 2 No of 6A, 3/2 pin modular type socket with cover plate fixing on existing, separate modular switch box including all labour charges etc., complete.
Makes of wires:- Finolex / RR kabel/Havells.
Makes of switches/sockets:- Legrand (Arteor) / Schneider (Clipsal X)/ Crabtree Murano
15
15321
1021.4
... More
Supply and Fixing of Pass Box SS 304 (Size: 2’*2’) can be provided in operation theatre to remove waste materials from the operation theatres to Dirty linen area just adjacent to Operation Theatre. Pass Box is equipped with two doors and the door shall operate electronically. The Pass Box is designed in such a way that only one door should be opened at one time. The UV light shall be installed in chamber. Make: CZS /BLS/SS 304 Zinda
3
190500
63500
... More
Supply, installation, testing& commissioning of GSS Ducting with required angle flanges & installation materials such as heavy duty supports by anchor fasteners etc as required asper IS 655 /SMACNA Standards.Makes:TATA/Jindal 22 G
250
332250
1329
... More
Supply and making heat shrinkable type outdoor termination joint kit of approved make suitable for XLPE insulated 11 KV cable, with required components, prepration of cable ends, testing etc as required of following sizes. Makes: Raychem /M seal/ Denson/ Multy/ Transeal Hongshang
Outdoor Termination Kit for 11KV XLPE (E) : 3C x 120 sq.mm
4
66400
16600
... More
Supply and fixing of suitable outdoor type feeder pillar box made with 14 SWG CRCA sheet after 7 tank process including S & F 40-63A FP MCB, 6 Nos SP MCB's, din channel, bus bars, 6 Sq mm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work.FP MCBmake :Legrand / Schnieder / L&T
1
24472
24472
... More
Supply and Fixing of Adapter for vaccum tube
5
350
70
... More
Supply and fixing of PVC synthetic elastomer electrically insulated mat conforming to IS: 15652-2006 with Class B insulation having 2.5mm thickness upto 11KV.
10
53615
5361.5
... More
Earth work excavation of Trench in hard ground soil, laying of U.G cables upto 50 Sq,mm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.
200
54700
273.5
... More
Supply, transportation and fixing of 36W Recessed/Surface mounting 2' x 2' (600x 600 mm) LED luminaire made of CRCA sheet housing with powder coated with acrylic diffuser, Constant current Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , With System lumen output ≥ 3200lm operating voltage range of 150 to 265 Volts AC, P.F 0.9, Surge protection: 2KV, THD10%, with high power LED's having efficacy of 120 lumens / watt, CCT: 3000K - 5700K, minimum CRI70 etc., complete including fixing in the ceiling with recessed/surface mounting, cost of all accessories and giving connections etc., complete with 5 years warranty.
a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/LG
250
851250
3405
... More
Supply and run of 3.5Core x 35 Sqmm Armoured Aluminium Electrical cable Interconnecting between AHU unit and out door units for Condensing Units as per standards. Approved Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel/RPG / Finolex / V-Guard.
500
119300
238.6
... More
Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I)/1554-IMakes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel
3.5 core, 50 Sq.mm
100
46010
460.1
... More
Supply and Fixing of 6 Amps modular type (ISI marked) switch, and 6 A 3/2 pin Modular type socket with cover plate on a common switch board including giving all connections and all labour charges etc., complete. Makes of switches/sockets:- Legrand (Arteor) / Schneider Clipsal X/ Crabtree Murano
20
8908
445.4
... More
Supply and Fixing of Ward Vacuum Units with 600 ml Jar.
5
9800
1960
... More
Painting to new wood work and flush shutters with lappam finish , over a primary coat and painting two coats of synthetic enamel paint Grade-I VOC (Volatile Organic Compound) content less than 50 grams/litre of approved shade including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper on lappam coats for neat finish and overheads & contractors profit complete in all floors (APSS No.1200, 1207 & 1211).
45
11070
246
... More
Supply and Run of 40mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete
50
11000
220
... More
Supply and Fixing of HP Makes: Aktiv Technologies// Atlas Capco/ Draeger Medical/ / Airox Technologies / Aastha Medical technologies/ GMP Technical Solutions / Medicare gas pipe line/Mediline Engineers
10
590
59
... More
Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I)/1554-I
Makes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel
3.5 core, 35 Sq.mm
100
34770
347.7
... More
Erection charges for 7.50 Mts long Octagonal pole on bridge kerb portion with 4 Nos, 8" Anchor bolts with chemical treatment with suitable "J" type bolts etc duly drilling holes to RCC slab with V.C.C. M.15 concrete for suitable base concreting with necessary steel reinforcement work and curing for 7 days etc. including cost and conveyance of all material and all labour charges etc., complete as directed by the department officers.
15
85035
5669
... More
Providing independent earthling by excavating a trench to a depth of 2.5 M in all soils, as per size specified in the Data, using 100mm dia Heavy gauge Flange C.I (Cast iron) pipe of 2.5 Mtrs length with necessary accessories duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete.
30
249240
8308
... More
Supply, erection, testing and commissioning of Fresh air intake GI louvers with bird screen as per standard specifications
75
468675
6249
... More
Supply and Installation of 250A FP, MCCB, 35/36KA on wall with suitable sheet steel enclosure with cable end boxes including all labour charges etc complete with connections. Make: L&T- D sine / Schneider-CVS/ Legrand (DP X3/DRX)/ Siemens-3VL/ C&S-Winbreak
5
163235
32647
... More
Providing and fixing factory made uPVC white colour sliding glazed window comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension
31
307675
9925
... More
Supply , Installation, Testing and Comissioning of Rack mounted 19", Cat 6 UTP,1.5-1.6 MM CRS chasis , powder coated Modular Patch Panels (upgradable to intelligent panels with use of sensor strips) with collapsible shutters on jacks to support latest ammendments of TIA / EIA Cat 6 Specifications in Existing Communication Rack along with necessary connections of Cat 6 UTP Cables, With Rear Cable management trays and clamps. 1) 12 Ports Patch Panels
Makes: Systimax /Legrand/Molex/Panduit/Siemond/AMP
1
5454
5454
... More
Supply of Automatic Street Light Control System with Optical Micro Sensor, Low voltage / High voltage trip and reset, operating voltage 150 -280V AC per Phase, 50 HZ with suitable SMC enclosure of IP 54 protection, MCBs and contactor suitable to control the load of ....... of Three phase load with necessary clamping arrangements.
Make: Swadeep Nature Switch / Light Mate /GL/Bajaj 8 KW
1
19121
19121
... More
Supply and Transportation of 12" (300mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades with Mark. Makes: Crompton / Almonard / Havells Turbo Force
30
115101
3836.7
... More
Supply and Installation of 200 Pair Telephone distribution box with back mount frame, krone connector, powder coated metal body with lock and key arrangement. Makes: Krone or equivalent make.
4
47044
11761
... More
Supply and fixing of 11KV/415V Danger Boards with Multi-Languages on the existing poles or structures or panels etc., at appropriate places.
10
1375
137.5
... More
Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required.
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / SANT/NEU-G/Honeywell//Kartar
80mm dia
1
4289
4289
... More
Supply and erecting MS Galvanished fan hook box with hook in RCC slab including all Labour charges etc., complete.
30
1371
45.7
... More
Supply,transporatation & installation of following sizes of Hot Dipped Galvanized Iron ladder type cable trays with rungs at span of 250 mm including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/wall with suspenders and etc., complete.
300mm X 50mm X 2.0mm size
100
77940
779.4
... More
Supply and application of poly urethene (P.U) of light green or light blue colour with 1mm thickness with anti fungal and anti bacterial chemical resistance durable and non particle shedding including cost and conveyance of all materials and labour charges etc., complete for finished item of work in Operation Theatre walls and ceilings
50
40400
808
... More
Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proofcompartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness,separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator).Incomer :-supply of 800A, 50KA, Four Pole, Electrically Operated, manually drawout type, Air Circuit Breaker Confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, shot circuit and earth fault Protection with display and 20 faults history backup with electrical and mechanical interlocking. Makes: Siemens/ L&T / Schneider /Legrand /C&S /HPL-1noOutgoing feeders:-Supply of 400A, 3 Pole, Adjustable, Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted. Makes: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno-1noSupply of 250A, 3 Pole, Adjustable, Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted. Makes: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno-5noSupply of 125A, 3 Pole, Adjustable, Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. Makes: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno-4noSupply of 63A/60A, 3 Pole, Adjustable, Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 16 KA with thermal magnetic release Panel Mounted. Makes: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno-2noMetering:-Supply and Fixing of (0-500) V range Volt meter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves/channel etc., as required. Make:Conzerve/Elmeasure/ Meco/ HPL/L&T/ Socomec-1NOSupply and Fixing of CT operated direct reading type Ammeter, above 500A, on existing panel , making connection by PVC insulated copper conductor with PVC sleeves/channel etc. as required. Make: Conzerve/Elmeasure/Meco/HPL/ L&T/ Schneider/AE/ Socomec-1noSupply and Fixing of Current Transformer, from 500 / 5 to 1600/5 Ratio , 15 VA , class 1 accuracy with all necessary support in existing panel including connection etc. as required Make: Kappa/L&T/ Seimens/ C&S/ Schneider-3 noSupply and Fixing of 240/220 V, LED (22.5 mm dia) Pilot lamp Red, Green & Yellow Colour with integral circuit, terminal block, including connection etc. as required-2 noSupply and Fixing of 240/220 V, LED (22.5 mm dia) Pilot lamp Blue Colour with integral circuit, terminal block, including connection etc. as required- 1NoSupply and Fixing of selector switch for voltmeter (4 position) including making connection etc. as required. Make: L&T / C&S/ Salzer/HPL - 1NoSupply and Fixing of CT linked selector switch of 10 A for Ampere meter (4 position) including making connection etc. as requiredMake: L&T/C&S/Salzer/ HPL- 1 No10 kA - 6-32A range SP MCBs. Make: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Crabtree-Xpro/L&T-AU -6 NoBus Bars:-Supply and fixing of Electrolytic grade aluminium bus bars by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleevesFor Main Bus Bars vertical Phases & Neutral (80x12x1.8x2.7)/1000)x4 = 18.66 Kg For horizontal bus bars Phases & Neutral ((80x12x1.8x2.7)/1000) x 4 = 18.66 Kg For vertical section bus bars Phases & Neutral (50x10x1.8x2.7)/1000)x4 = 9.72 Kg Conecting Links for MCCBs = (50x10x0.6x2.7/1000)x4x2 + (40x8x0.6x2.7/1000)x4x2 + (25x8x0.6x2.7/1000)x4x8 = 6.48 + 3.31 + 10.39 = 20.18 sat 20 KgControl wiring with suitable size of approved make FRLS PVC flexible copper wires, Earth Bus Bar, Door Loop earhtings, Ferrules, Feeder identifications, danger plate, door locks etc., labour charges for errection of switch gears, panels boards, with all other accessories including all labour charges etc with connections for finished item of work including transportation charges @ 5%
1
602220
602220
... More
Supply and fixing of ISI mark (IS:15683) Mono ammonium phosphate powder 90 (MAP) 6 Kg Fire extinguisher, stored pressure type, pressure gauge, gross wt. 9.4 kg, empty wt.3.4 kg, Discharge time minimum 13 sec, controllable discharge mechanism, range min. 4 mts applicable on classes A,B, C & electrically started fire, A rating -4 A, B rating -34 B, can construction: Deep drawn and Co2 mig welding, Valve construction: Forging & Machining, internal coating of can: Epoxy powder coating, External coating of Can:Epoxy polyster powder coating, sheet metal thickness:1.60mm, Helium leak detection tested with 5 years warranty Including transportation, all taxes and all labour charges etc complete.Makes : Cease Fire / Minimax
2
23780
11890
... More
Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 402) FOR FOOTINGS
50
223400
4468
... More
Supply Installation Testing and Commissioning of AUTO MAINS FAILURE (AMF) Panel with IP 52 protection, fabricated from CRCA sheet steel 2mmThick , Powder coated finish , Engine START & STOP commands, control RELAYS, selector switches for Ammeter & Voltmeter, Ammeter & Voltmeter ,4pole MCCBs for EB Supply and DG Supply of required rating and breaking capacity, automatic battery charger(External charger for DG) Control & Power Contactors, Timers, Electronic Hooter ,Visual & Alarm indication for faults, UPS, operator interface panel complete in all respect suitable for following capacity DG sets:
AMF Panel for 320 to 500 KVA DG set
1
324939
324939
... More
Supply and fixing of Modular type 2- Module, Electronic fan regulator hum free step type socket size in the existing switch board. Makes :- Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)/ Million (M-VEE)
250
141071
564.29
... More
Supply, installation, and testing of UPVC Drain Piping with 6mm Nitrile Rubber class "O" Insulation covered with interwoven glass cloth protection. Necessary pipe fittings (including enlarger, bends, T Joints etc) has to be considered to connect the UPVC drain pipe to cast iron floor trap. a) 25 mm
50
10700
214
... More
Labour charges for run of U.G cables from 70 to 300 Sqmm on wall with necessary fixing arrangments such as saddles, clamps etc., as directed by department including cost and conveyance of all materials etc., complete.
100
9460
94.6
... More
Supply and Installation of Expansion cabinet for 220 more extensions.
2
228208
114104
... More
Supply,transporatation & installation of following sizes of Hot Dipped Galvanized Iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete
150mm X 50mm X 1.6mm size
50
24600
492
... More
Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I)/1554-I
Makes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel
3.5 core, 50 Sq.mm
10
4601
460.1
... More
Supply and fixing of ……mm thick copper pipe thick for distribution, pipes shall be half drawn, tempered, seamless, phosphorous deoxidized, non arsenic and decreased confirming to BS 2871-1971 Part-1 (Table-X) and the chemical compositions shall be as per BS 6017 of 1981 table-2 with Lloyd Test Certification, including cost and conveyance of pipes, cost of necessary specials made of copper and suitable for a steam working pressure of 17 bar and should confirm to BS 864 with specially made for brazed socket type connections, including taxes, transportation charges including laying and jointing, testing, commissioning and all other labour charges etc. complete for finished item of workMake: IBP Conex / Maxflow 12mm O.D x 0.7 mm
1009
329943
327
... More
Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site including all charges for machine mixing, hire charges of concrete mixer, centering charges, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for bed blocks & hold fasts for finished item of work. (APSS No. 402) 2nd Floor
0.5
3050
6099
... More
Supply and laying of B class GI pipe of ISI mark with all accessories of following sizes for laying at the road crossings for the UG cables.
40 mm dia medium grade, G.I Pipe
10
5000
500
... More
Providing transformer plinth 1.2 x 1.2 x 1.5 mtr in size with necessary excavation in ground at the bottom with 150mm thick 1:2:4 cement concrete raft at the bottom and top and 225mm thick wall constructed in stone masonry and remaking hallow portion shall be filled with stone chips duly plastered 20mm thick outsides including watering etc., complete..
2
27495
13747.4
... More
Supply and fixing of fan hook in RCC slab of 12/15mm dia MS Rod while laying the slab.
10
881
88.1
... More
Supply and Installation of IP CPU card for redundancy purpose.
1
49216
49216
... More
Supply and laying of B class GI pipe of ISI mark with all accessories of following sizes for laying at the road crossings for the UG cables.
40 mm dia medium grade, G.I Pipe
10
5000
500
... More
Supplying and fixing of MS Grill to windows / in open court yards using 25mm x 6mm MS flat alround and 10mm MS square bars horizontally at 125mm centre to centre and vertically at 300mm centre to centre including fixing with 4 Nos of MS Z holdfasts (2 on each side) duly making cutting brick masonry, fixing and making to original surface neatly including cost and conveyance of all materials, cutting, bending, welding, operational charges, labour charges, overheads and contractor profit etc., complete for finished item of work.
26
36504
1404
... More
Supply & Fixing of Cisco small business 24 port GE, full POE with 370W power budget, 4x1G SFP Make & Model: CISCO CBS350-24FP-4G-IN or equivalent in Juniper/Extreme
1
99540
99540
... More
Cutting road surface including stacking of excavated materials for UG Cable trench work.
b) Cutting open C.C. road surface with concrete saw cutter and removal with Breaker
5
18696
3739.1
... More
upply and fixing of Cable adopter/Cable end box with cover suitable for 4-way TPN, IP-43 protection DBs including, massanory work etc., complete for concealed mounting. Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+
6
7224
1204
... More
Supply and installation of dual tone electronic hooter of 85dB including the cost of mounting accessories complete as per specifications and as required.Makes: System Censor / Ravel/Vertex
10
10780
1078
... More
Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I)/1554-IMakes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel
3.5 core, 185 Sq.mm
1150
1629320
1416.8
... More
Supply, Transportation, Installation, Testing and Commissioning of Ceiling suspended laminar flow (Planair Ceiling system) with unidirectional airflow work space / discharge plenum for operation rooms comprising as standard feature with HEPA filter efficiency not less than 99.97% down to 0.3 Microns (Factory DOP tested), per operation room shall not be less than 3.1 sqm area with appropriate depth to accommodate absolute filters, with air flow at approx. 90-100 Fpm velocity. Size 8ft X 6ft. The laminar flow system shall have such design that it provides "H13/14” class Hepa filter. Material of construction Shall be 1.2mm thick S S 304 Plenum with S S Perforated sheet at the bottom. Each air inlet should be supplied with Aluminum opposed blade damper. Diffuser: 2 layer monofilament precision woven polyester of uniform porosity with an open area of sufficient resistance to create laminar from diffusers face and integral lighting provides an illumination level in excess of 1500 Lux in operating area and 1000 Lux other electronic stepless dimming down to 5% without flicker. The entire plenum should be insulated with 19mm thick Al faced nitrile rubber. Bottom discharge should be perforated SS Sheet of 1.6mm with reinforcement to avoid waviness.Make : Dyna / American Air Filter / M.K Precesion
3
937323
312441
... More
Supply and Fixing of single phase DB in sheet steel enclosure as per IS 8623; IS 13032; IEC 61439-3 with metalic plug and socket with 1 No. 20/32A,10KA 'c' curve SPMCB control including labour charges and giving connections etc., complete concealed in wall. Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/ Makes for MCBs: Legrand-DX3 / Schneider-Acti9/Hager-h3/ .
15
38085
2539
... More
Supply and Fixing of Modular OT Wall and Ceiling Paneling: Wall & Ceiling with SS Puff Panel with Antibacterial Paint Having 50 mm thick with PUF (Polyurethane Foam) and thickness not less than 0.8 mm thick in room side and 0.8 mm thick in wall side having density of 40 Kg / IM3. Including of all joints with silicon sealant. Make: Tata, Jindal
100
400000
4000
... More
Supply and fixing of ……mm thick copper pipe thick for distribution, pipes shall be half drawn, tempered, seamless, phosphorous deoxidized, non arsenic and decreased confirming to BS 2871-1971 Part-1 (Table-X) and the chemical compositions shall be as per BS 6017 of 1981 table-2 with Lloyd Test Certification, including cost and conveyance of pipes, cost of necessary specials made of copper and suitable for a steam working pressure of 17 bar and should confirm to BS 864 with specially made for brazed socket type connections, including taxes, transportation charges including laying and jointing, testing, commissioning and all other labour charges etc. complete for finished item of workMake: IBP Conex / Maxflow 28mm O.D x0.9mm
130
316030
2431
... More
Supply and placing of the Design Mix Concrete M 25grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site, centering using casurina ballies , bamboos , wooden reapers , runners , wood posts , wall plates etc., for 60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing, overheads & contractors profit complete etc., but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402, 403 & 903) 2nd Floor
12
6888
574
... More
Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) Basement
1200
645600
538
... More
Supply & run of 5 of 10.0 Sqmm (phases, neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in the existing conduict pipe for run of mains from Power panel board to TPN DB"s with pin type lugs and connections etc., complete. [for PDBs] Makes of wires:- Finolex / RR kabel/ Havells.
500
350600
701.2
... More
Supply and Fixing of batten holder/angle holder on existing block with 0.5W LED Lamp with input voltage 90 to 300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base and all labour charges etc., complete., in lieu of ceiling rose for bed light in hostel rooms or residential buildings. Makes: Phillips /Crompton / Bajaj / Havells / GM/HPL/Syska /GoldMedal
25
3200
128
... More
Supply and Run of No. 8 SWG copper wire including cost of all accessories and labour charges etc., complete.
100
13260
132.6
... More
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Columns-1st Floor
30
404640
13488
... More
Masonry work in CM(1:6) prop (Cement : Sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, fly ash cement / lime solid blocks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504). 2nd Floor
75
596925
7959
... More
Labour charges for fixing of ceiling fan including transportation and giving connections with 23/0060 size, 3 core round flexible copper wire leads of make Finolex / RR kabel/ Havells/KEI/Polycab/ Goldmedal/GM/Million etc complete
250
54675
218.7
... More
Providing , laying, testing & Commissioning of following classes MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.B-CLASS MS PIPES
Makes : Jindal / Hissar / Tata pipes/Prakash Surya 80mm dia
10
15010
1501
... More
Supply, installation and testing of Canvas connection for the Treated Fresh Air units to the duct
30
94860
3162
... More
Supply ,installation, testing and commissioning of Fully managed L3 Core Switch with 16 port 10G SFP+Ports with blank Slot addon Network card of 2×40G ports. Make & Model: CISCO C 9500-16X or equivalent in Juniper/Extreme
1
1185000
1185000
... More
Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site including all charges for machine mixing, hire charges of concrete mixer, centering charges, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for bed blocks & hold fasts for finished item of work. (APSS No. 402)1st Floor
7
41496
5928
... More
Supply and fixing of 300mm x 180mm x 140mm No.16 gauge CRCA sheet box with hinged door and locking arrangements and din channel for fixing 1Nos MCBs duly powder coated with matching colour of poles including fixing with necessary arrangments etc., complete.
15
31721
2114.7
... More
Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I)/1554-I
Makes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel
3.5 core, 25 Sq.mm
100
28060
280.6
... More
Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).
20
4320
216
... More
Fabrication, Transportation and supply of hot-dip galvanized Octagonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with hinged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 7.5 Mtrs height Pole having dimensions Bottom 130 mm,. Top 70mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700 long 'J' bolts along with template. Make : Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper/Consoul
15
235905
15727
... More
Supply and laying of 50 pair telephone wire 0.5mm copper in the existing metallic/non metallic conduit pipe with connections etc.,complete for telephone wiring. Makes: Finolex / Delton / Surabi / Polycab.
120
32508
270.9
... More
Supply and Fixing of Adapter for Air
5
650
130
... More
Supply and fixing of Kit for conversion of Oxygen consisting high pressure pin index tube with connecting pin including cost and conveyance of materials, taxes, transportation charges and labour charges for fixing etc. complete for finished item of work.
5
16000
3200
... More
Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness,separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator).
Supply and Fixing of the Incomers :-
Incomer and Bus Coupler :1000A 50kA, Four Pole, Electrically Operated, manually drawout type, Air Circuit Breaker Confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, shot circuit and earth fault Protection with display and 20 faults history backup. Makes: Siemens/ L&T / Schneider /Legrand /C&S /HPL-2no
Supply and Fixing of the following Outgoing feeders:-
Supply of 800A, 4 Pole, adjustable MCCB, Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 50 KA with thermal magnetic release Panel Mounted. Makes: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno-2NOSupply of 800A, 3 Pole, adjustable MCCB, Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 50 KA with thermal magnetic release Panel Mounted. Makes: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno-2NOSupply of 400A, 3 Pole, adjustable MCCB, Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted.Makes: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno-2NOSupply of 250A, 3 Pole, adjustable MCCB, Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted.Makes: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno-4NOSupply of 125A, 3 Pole, adjustable MCCB, Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. Makes: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno-4NOSupply of 63A, 3 Pole, adjustable MCCB, Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 16 KA with thermal magnetic release Panel Mounted. Makes: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno-2NOBUS COUPLER ( ACBs (Microprocessor Based)Metering:-Supply and Fixing of (0-500) V range Volt meter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves/channel etc., as required. Make:Conzerve/Elmeasure/ Meco/ HPL/L&T/ Socomec - 4NoSupply and Fixing of Maximum Demand Controller with LCD/LED display capable of Accuracy class 1.0,0.5s . input voltage measurement range 50-520VAC(P-P), Aux supply 80-300VAC/DC ,CT secondary site selectable 1A/5A,flush mount 96x96mm,ct/pt site programmable,Datalog(8mb),4 realy outputs for max demand controller,time of day 6 slots available,block/sliding window site selectable,Running demand,Max demand,predication demand in single page window with RS485. .Make:L&T CAT NO WL6000110000 - 4NoSupply and Fixing of Current Transformer, from 500 / 5 to 1600/5 Ratio , 15 VA , class 1 accuracy with all necessary support in existing panel including connection etc. as required Make: Kappa/L&T/ Seimens/ C&S/ Schneider - 6 NoSupply and Fixing of 240/220 V, LED (22.5 mm dia) Pilot lamp Red & Yellow Colour with integral circuit, terminal block, including connection etc. as required for capacitor ON and OFF + Supply indication- 37 NoSupply and Fixing of 240/220 V, LED (22.5 mm dia) Pilot lamp Blue Colour with integral circuit, terminal block, including connection etc. as required for supply indication- 2 NoSupply and Fixing of selector switch for voltmeter (4 position) including making connection etc. as required. Make: L&T / C&S/ Salzer/HPL - 2NoSupply and Fixing of CT linked selector switch of 10 A for Ampere meter (4 position) including making connection etc. as requiredMake: L&T/C&S/Salzer/ HPL- 2 NoSupply and Fixing of Cam operated rotary switches on existing panel with 2 way and off position, two pole, 16A. Makes: L&T (SALZER)/ABB/ Schneider/ Seimens /C&S/HPL. - 9 No10 kA - 6-32A range SP MCBs. Make: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Crabtree-Xpro/L&T-AU -18 NoSupply and Fixing of 25A TNC(TRIP,NEUTRAL ,CLOSE)SWITCH .ACB ON/OFF PURPOSE -11NoSupply and Fixing of 630A MCCB EXTENDED ROTARY HANDLE Make:L&T (DN3B, DN3 Extended ROM)- 4 NoSupply and Fixing of 400A MCCB EXTENDED ROTARY HANDLE Make:L&T (DN3B, DN3 Extended ROM) - 4 NoSupply and Fixing of 250A MCCB EXTENDED ROTARY HANDLE Make:L&T ( DN2 Extended ROM) - 4NoSupply and Fixing of 125A MCCB EXTENDED ROTARY HANDLE Make:L&T ( DN0 Extended ROM)- 2 NoBus Bars:-Supply and fixing of Electrolytic grade aluminium bus bars by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleevesFor Main Bus Bars horizontal Phases & Neutral ((4Rx100x10x10.6x2.7)/1000)x4 =457.92 KgConecting Links for 3200A ACBs = (4Rx100x10x0.4x2.7/1000)x12 = 51.84Conecting Links for 2000A ACBs = (3Rx100x10x0.4x2.7/1000)x 8= 25.92 Conecting Links for 1250A ACBs = (2Rx100x10x0.4x2.7/1000)x 8= 17.28Conecting Links for 1000A ACBs = (100x10x0.4x2.7/1000)x 8= 8.64Conecting Links for 800A ACBs = (100x10x0.4x2.7/1000)x8 = 8.64 vertical bus bars Phases & Neutral= ((4Rx100x10x1.8x2.7)/1000)x4 =77.76 For 2 No of vertical bus bars Phases & Neutral (2 sets, LHS & RHS) ((2Rx80x10x1.8x2.7)/1000)x4 =31.10 FOR 2 SETS 2X31.10=62.20 KG'SConecting Links for all MCCBs = (80x10x0.6x2.7/1000)x4x4 +(50x10x0.6x2.7/1000)x4x4 + (40x8x0.6x2.7/1000)x4x4 + (25x8x0.6x2.7/1000)x4x2 = 20.73 Kg + 12.96 Kg + 8.2Kg + 2.59Kg =44.48 KgControl wiring with suitable size of approved make FRLS PVC flexible copper wires, Earth Bus Bar, Door Loop earhtings, Ferrules, Feeder identifications, danger plate, door locks etc., labour charges for errection of switch gears, panels boards, with all other accessories including all labour charges etc with connections for finished item of work @ 5%
1
2735700
2735700
... More
Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete
50
49645
992.9
... More
Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I)/1554-IMakes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel
3.5 core, 240 Sq.mm
150
270465
1803.1
... More
Supply and fixing of TPN 4 way distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, (8+12 Module) with provision to accommodate the RCCB & FP MCB as incomer and suitable for single pole outgoing MCB's in sheet steel enclosure with 40A, 10 KA breaking capacity 'c' curve 4 pole MCB with 40A, 30mA, 4 Pole RCCB as incomer and 12 No of 6 to 32A single pole, 10 KA breaking capacity 'c' curve MCBs as outgoings including making connections etc., complete concealed in wall. (LIGHTING DB). Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello Makes for MCBs: Legrand-DX3 / Schneider-Acti9/Hager-h3/
4
66268
16567
... More
Supply and errecting fencing section having size 2.1 mt height from ground level and 1.2 mt width by using angle iron size 50mm x 50mm x 6 mm with 50 x 50 x 6mm 'T' Angle on middel, erected in C.C. foundation 15cm x 15cm x 40 cm deep. The section of the frame shall be fitted with hot dipped galvanised Iron chain link mesh of 8 gauge (4.0 mm) as per IS: 2721-1979 at a spacing of 2"x2" (50 mm x 50 mm) with flat iron support of size 25 x 6 mm on top, bottom and midle and sides and including all accessories and duly painted with one coat of red oxide and 2 coats of aluminium paint and all labour charges etc. complete.
50
380000
7600
... More
Supply and Fixing of Two Plate X-Ray Viewing Screen designed to provide a high level of control luminance without flicker. Size - 950 x 650 x 115 mm (Make : Mediconz International - Country of Origin -India, Srimodular / CZS / Altos)
3
97500
32500
... More
Supply ,installation, testing and commissioning of Fully managed L2 Distriburion Switch with 20x10G SFP+ +4x10G Copper/SFP+Combo ports.Makes&Model:CISCO CBS350-24xS or equivalent in Juniper/Extreme
3
825417
275139
... More
Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with integral cement water proofing admixture confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 100ml per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903). over Second Floor
450
301500
670
... More
Supply,transporatation & installation of following sizes of Hot Dipped Galvanized Iron perforated cable trays with cover, including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete
150mm X 50mm X 1.6mm size
50
31975
639.5
... More
Supply and Fixing of batten holder/angle holder on existing block with 5W LED Lamp with input voltage 90 to 300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base and all labour charges etc., complete. In lieu of ceiling rose.
Makes: Phillips /Crompton / Bajaj / Havells / GM/HPL/Syska /GoldMedal
10
2020
202
... More
Supply, Transportation and laying of 4 core, 4 Sq.mm XLPE/PVC insulated & PVC sheathed Armoured control cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I -1988 including all labour charges, giving connections etc., complete for Generators from their AMF/Synchronour Panels and for auxiliary supplies to PCC Panels/HT VCB Panels Panels. Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel/RPG / Finolex / V-Guard
100
33266
332.66
... More
Supply, installation, testing& commissioning of GSS Ducting with required angle flanges & installation materials such as heavy duty supports by anchor fasteners etc as required asper IS 655 /SMACNA Standards.Makes:TATA/Jindal 22 G
50
66450
1329
... More
Supply , Installation, Testing and Comissioning of Rack mounted 19", Cat 6 UTP,1.5-1.6 MM CRS chasis , powder coated Modular Patch Panels (upgradable to intelligent panels with use of sensor strips) with collapsible shutters on jacks to support latest ammendments of TIA / EIA Cat 6 Specifications in Existing Communication Rack along with necessary connections of Cat 6 UTP Cables, With Rear Cable management trays and clamps. 1) 24 Ports Patch Panels
Makes: Systimax /Legrand/Molex/Panduit/Siemond/AMP
20
321560
16078
... More
Supply, installation,Testing and Comissioning of 16 channels NVR with 1080P recording resolution, adaptive recording, camera wise recording retention, CMC, Web client, mobile application (IOS & Android), 2 SATA slot each 6TB, SMS & Email notification, ONVIF, HDMI, VGA, Output.
Make: MATRIX/ Honeywell/ Bosch/Tyco.
2
114320
57160
... More
Supply, laying, testing and commissioning of 4-pair, Cat-6 Solid (Third party ETL Intertek tested 600 MHZ above) to support 1Gbps with Cross (+) filler pair seperator & PVC sheath 23 AWG, UTP Cable , Meets or exceeds ANSI/TIA- 568-C.2 and UL Listed &RoHS Compliant in the existing raceways /pvc conduits including making connections to information outlets and patch panels with ferruling at both ends for identifiation with necessary tools for punching stripping crimping and testing required etc., complete Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand
1200
61320
51.1
... More
Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI
4 core, 6/10/16 Sq.mm
10
3158
315.8
... More
Supply of Suction Trollies with SS Shaft & frame, fibre base & synthetic wheels, suitable to use in Operation theater with 2 no. of 2000 Litres Jars based on movable trolley with regulator & high pressure connection tube & adopter including cost and conveyance of all materials and all labour charges etc. complete for finished item of work.
Make: Perfect Medical
5
47500
9500
... More
Supply, transportation and spreading the 40mm size HBG metal in two layers of about 100mm thick in and around the sub-station yard.
80
137240
1715.5
... More
Supply and fixing printed Shock instructions chart in English / Hindi / Telugu duly framed with front glass for treatment of person suffering from Electric shock.
10
6192
619.2
... More
Supply, Installation, Testing, Commissioning and Handing over of Gas outlets Points with Matching Probes. The gas outlets shall conform to the following specifications 1.The medical gas terminal units shall comply with the requirements of HTM 02-01 / NFPA99/IS-ISO 9170-1. The terminal unit shall comprises a gas-specific basic block (rear part) and a socket unit (front part) which are joined together. The gas-specific basic block shall includes a non-return and servicing valve. valve. The servicing valve shall be screwed into the connecting thread in the rear part of the basic block and shall interrupts the gas supply to the terminal unit completely. A separate, gas-tight shut-off of the terminal unit is thereby provided for servicing work.
2.The terminal socket unit (second fix) must be all in metal in construction with laser labelling, front panel with wavy lines and diaphragm ring, unlocking by means of the actuator, singlehanded operation when connecting or disconnecting, manually lockable servicing valve. The socket assembly and terminal block shall be gas specific, designed to prevent interchangeability with components of other gas services. All socket assemblies shall be permanently and legibly marked with the relevant service name or symbol. All socket assemblies shall be colour coded in accordance with Indian standards. Materials for colour coding shall be permanent. Paint shall not be used. Socket assemblies for wall mounted terminal units shall incorporate an anti-swivel pin to ensure flow meters and other equipment remains vertical during use. The housing assembly will only permit a flow of gas when the correct, gas specific probe is inserted into the socket assembly. The flow of gas will cease and the housing assembly re-seals when the probe is removed.The outlets should Quick Connect Type and gas specificity is accomplished by "Diametric indexing."Should have Push to insert and press-to-release mechanism for probes.Allows plugging of probes from front.Parking Type probe / connectorSelf-sealing valve on disengaging the probe (Quick disconnect)Smooth quite actionNon return valve for on line servicing/ repairingIndexed to eliminate inter-changeability of gas servicesColor-coded gas specific front plateFlow rate exceeds the requirements of IS-ISO 9170 – 1.Totally leak proof, safe & easy to operateConfigurations possible: surface, flush & Bead-head. a). Oxygen Outlet b). Nitrous Oxide Outlet c). Compressed Air Outlet ( 4 Bar ) d). Vacuum Outlet e). Compressed Air Outlet ( 7 Bar ) g).Carbon Dioxide Outlet
30
49500
1650
... More
Supply and installation of powder coated linear supply air grills/Preforated sheets with VCD & Plenum box. MAKE : Cosmic / System air / Carry air
3
19500
6500
... More
Supply and Transportation of ISI marked copper wound Transformers 11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 11 KV as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 described as above with Cable box on HV side and Bus duct on LV Side , ON load Tap changer(OLTC)+10% to -10%, with RTCC etc., with initial filling of oil as per IS 335-1993 complete and as per the following continuous rating.Make:Schneider/Kirloskar/Voltamp/ Esennar/ Toshiba/ KPEL/ Powertech /SSE/ THOTA / Vajra
1
2420724
2420724
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements