Amaravati Development Corporation Limited Tender
... More
The ADCL has issued a formal invitation for competitive bids for the Amaravati Development Corporation Limited project, for Construction Of Balance Smart Trunk Infrastructure With Roads, Storm Water Drains, Water Supply Network, Sewerage Network, Utility Ducts For Power And Ict, Reuse Waterline, in Guntur, Andhra Pradesh, with an estimated contract value of Rs. 1,99,28,71,871. The bid opening date for this tender is 14-02-2025 and the last date for bid submission is 03-03-2025. Interested bidders for Amaravati Development Corporation Limited tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Amaravati Development Corporation Limited - ADCL Tender
Civil And Construction
Road Construction
Civil Works Others
Drainage Work
Agriculture or Forestry Works
Opening Date14 Feb 2025
Closing Date3 Mar 2025
Tender Amount₹ 1,99,28,71,871
Costs
EMD
₹ 1,99,28,719Document Cost
Refer DocumentsTender Fee
₹ 20,000
Summary
Construction Of Balance Smart Trunk Infrastructure With Roads, Storm Water Drains, Water Supply Network, Sewerage Network, Utility Ducts For Power And Ict, Reuse Waterline,
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
786095Tender No
317/ADCL/IPD/2024-25Tender Authority
Amaravati Development Corporation Limited ViewPurchaser Address
-Website
http://http://ccdmc.co.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials500mm dia
11
12610
138711.43
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
2635.42
638
1681477.02
... More
Supply and Installation of 150mm x 50mm x 2mm thick GI Ladder type cable tray along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete.
342.03
620
212174.89
... More
Providing RCC M-30 grade for Manhole Type-C Wall Extra Depth for every 1.0 m depth beyond 1.50 m and inling with SRC cement motor of 1:3. With Wall thickness 200mm including Formwork & Reinforcement HYSD FE500 including cost of labour,material, centreing charges etc complete as per drawing and specification and as directed by the Engineer -in-charge (with minimum cement quantity of 407kgs per cum for M30grade)Note : The rate shall be adjusted as per the approved design mix by the competent authority
3.09
23817
73595.74
... More
Filling of Median / Island with excavated material deposited at site from roadway cutting and excavation for drain and foundation of other structures, spread, graded and compacted with Plate compactor as per drawing, Technical Specifications Clause 408 (5th Revision) with all leads and lifts complete for finished item of work and as directed by the Engineer in Charge
656.46
381
250413.23
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials 100mm dia
11
1967
21645.91
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
202.75
638
129360.58
... More
Supply and fixing of 6-32A 10KA SP MCB, C/D Curve ISI in Octagonal pole with Din channel, with or without insulator terminal strip connector including cost & conveyance of all materials and labour charges etc., complete Makes: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno)/Anchor (Uno plus).
1464
339
496500.96
... More
Form work for Drain side walls including cost & conveyance of all materials to site and labour charges, other incidental hire and operational charges of all T&P etc., complete as per approved drawings etc., complete and as directed by Engineer-in-charge
69614.67
568
39546701.73
... More
Manufacture as per BIS: 12592(part- 1&2), Supply & and delivery of 24x24 HD-20 Heavy Duty Manhole Covers and frames with ISI marking any where in A.P., F.O.R destination including, loading, unloading & stacking.
73
2147
156754.36
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
252.75
133
33810.37
... More
Supply & Laying following G.I gratings confirming to IS:1239 P-1 (2004) with accessories like bend, socket etc. for laying of G.I gratings ) including loading, transportation, unloading and stacking at site of work etc, complete as directed by engineer in charge
490
134
65782.5
... More
Providing and fixing of Moulded Shanks Raised Pavement Markers made of Polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lense face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 TypeH and complying to specifications of Category A of MORTH circular No.RW/NH-33023/10/97 - DO III dt. 11-o6-1997. The height, width and length shall not exceed 50mm, 100mm and with minimum reflecting area of 13 sqcm on each side and the slope to the base shall be 35 +/- 5 degrees The strength of detachment of the integrated cylindrical shanks (of diameter not less than 19 +/- 2mm and height not less than 30 +/- 2mm) from the body is to be a minimum values of 700kgs. Fixing will be by drilling holes on the road for the twin shanks to go inside without nails and using epoxy resign based adhesive as per manufacturers recommendation and complete as directed bythe Engineer.
8680
336
2916480
... More
Supplying of hot applied thermoplastic road marking compound, 2.50mm thick including reflectorising glass beads @ 250gms with Reflectorising Glass beads on Bituminous surface at 250gms per Sqm area, thickness of 2.50mm is exclusive of surface applied glass bead as per MoRTH section 803.40 & IRC 35 -2015 , the material should be satisfy MoRTH specifications 803.40 and must comply with the following a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab .In case the department approves the white index box of any vendor, the department engineer may carryout random checking of the appplied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department), b)The Luminance factor of the material should be in the range of 80-85% at 45 degrees centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262 part-1, 1989 and should pass at the range of 0 degree centigrade to '-10 ' degree centigrade. D) Adhesion : Strong E) Softening point 102 degree centigrade F) Dried film finish : Smooth and uniform G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS 164-1961 (1st revision reaffirmed in 1986) and clause conforming to IRC 35-2015 & MoRTH section 803.4-Pedestrian Crossing at junctions and median openings
1092
560
611520
... More
Service connection using 1 No.of Composite Clamp Saddle for tapping from DI distribution mains shall be of wrap around design, wide skirt and wide straps support, which shall reinforce the pipe while providing excellent stability to the saddle. Non corrosive plastic body moulded with stainless steel threaded metal insert for tapping outlet and underneath projection to self interlock with DI/HDPE main pipe. Threading size and dimensions shall conform to IS: 554. The body shall have retaining cavity housing for internal and external retention of the elastomeric seal. Straps shall be made Engineering plastic SS 304, NC Rolled thread, tightening torque for 1/2" (M12) nut bolt 14-15Kg.m and for 5/8"(M16) nut bolt 21-23Kg.m (DI Main Pipe Sizes from 100mm to 250mm with Outlet Sizes of 1/2", 3/4",1" Outlets),1 No. of Regulating Brass Ferrule.(1/2",3/4",1"),2 No. of compression adaptor with one side compression end to suit ½” /3/4”/1” (20mm/25mm/32mm OD )PE80 Blue pipe and other side with female threaded off-take with SS-304 material inserts of sizes ½” /3/4”/1” BSP threads, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.Double Compression elbow to suit 20mm/25mm/32mm OD PE80 Blue pipe, Body, Nut and cap of polypropylene, clip ring of POM (Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16. PE80 Blue pipe of 4 meter length as per ISO4427 Rev1. for conveyance of potable water. the pressure rating 1/2" (20mm OD) will be PN16. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated Laboratories to be produced. inclusive of Transportation, installation cost, civil works such as earthwork excavation, refilling etc complete as directed by Engineer-incharge
9
1900
17100
... More
Earthwork excavation by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete including charges for finished item of work as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge 6m incl. dewatering
2253.33
197
445438.27
... More
Earth work excavation for foundations Digging of pits for plant in ordinary soils 0.90x0.90x0.90 mtr. Tall Plants
2530
155
392150
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHb) 3.0 m To 6.0 m Depth including dewatering
2698.51
160
431896.53
... More
Providing and laying of Dense Graded Bituminous Macadam with 100-120 TPH Batch type HMP Producing an average output of 75 tonne per hour using crushed aggregates of Grading - II as per table 500-10 of MoRT&H Specification 505 (5th revision) premixed with bitumen binder VG 40 grade @ 4.50% of weight of total mixture, transported to site, laid over a previously prepared surface with Hydrostatic paver finisher with sensor to the required grade, level and alignment and rolled with smooth wheeled, vibratory and tandem rollers as per Clauses 501.6 and 501.7 to achieve the desired compaction for finished item of work as directed by the Engineer-in-Charge including hire and operational charges all T&P and all other contingent charges necessary including cost of of all materials etc., complete as per MoRT&H specification No. 505 (5th revision)
13575.43
9810
133180805.73
... More
Supply and Laying of a geotextile 200 gsm between pitching and embankment slopes on which pitching is laid to prevent escape of the embankment material through the voids of the stone pitching/cement concrete blocks as well as to allow free movement of water without creating any uplift head on the pitching as per Tech Specifications in Section 700 & 2504 MORTH.
2771.36
189
524313.6
... More
Supply & Fixing of Powder Coated Fire Rated doors, frames & shutters made of Skin pass galvanized Iron sheet conforming to Base Steel as per IS 513 “D” Quality, Galvanized as per IS 277 with Hot Zinc Coating of 120 grams / Sq.Mtr with powder coating of thickness 60-65 Microns, frame with 1.2mm thick Skin pass Galvanized Iron sheet formed to double rebate profile of ize 143 mm X 58 mm with maximum bending radius of 1.4 mm and filled with in-fill Polyurethane foam, the Door Shutters are with 0.80 mm thick Skin pass Galvanized Iron Sheet formed to provide a 46 mm thick fully flush, double skin door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper and coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane powder for powder coating of thickness 60 – 65 microns and are coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability, the Shutter provided with 6 MM clear float vision glass in Circular, Square or Rectangular shapes, Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise Sash Lock with Lever Handles, Mortise Dead Bolt, etc for 120 minutes Fire Rated door conforming to IS:3614 (Part2) 1992
26.25
15792
414552.86
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
2302.65
638
1469159.78
... More
Cost of Nerium dwarf (7"x8") /Equivalent
307860
20
6157200
... More
Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure as per the drawing and as directed by the Engineer - in - Charge.63mm dia
1177
26
31202.27
... More
Providing and fixing Cautionary / Warning sign boards size 900 mm equilateral triangle made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of White colour and letters/logos done by screen printing in Black colour, boarders by screen printing in Red colour and fixed over 4MM Aluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading chages necessary for satisfactory completion of the work as directed by Engineer -in-Charge.
4
6958
27832
... More
Providing Spacers of Acrylonitrile Butadiene Styrene (ABS) material make with 10mm thk for HDPE Pipe conduits including placing, positioning at 2 mtr interval as directed by engineer-in-charge.Spacers for ICT : DWC- 4 & 7 Way-7
5126
2030
10405780
... More
Providing Spacers of Acrylonitrile Butadiene Styrene (ABS) material make with 10mm thk for HDPE Pipe conduits including placing, positioning at 2 mtr interval as directed by engineer-in-charge.Spacers For Power Conduits
5805.5
210
1219155
... More
Supply of PVC Water Stopper 310mm wide to be provided at end of crossing etc., complete and as directed by Engineer-in-charge
2340.68
519
1215327.87
... More
Supply of Polysheet of 125m micron thick to cover PVC water stopper etc., complete and as directed by Engineer-in-charge
396.01
17
6862.85
... More
Supply transportation and laying of 16 Sqmm 4 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt
16572
259
4294633.8
... More
Lowering and laying by pushon joint of OD 160mm DWC pipe double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II including cost of labour, material and other incidental charges etc. complete as directed by the engineer-in-charge.
31477.81
21
664811.35
... More
Providing Bituminous Concrete with 100-120 TPH Batch type hot mix plant producing an average output of 75 tonne per hour using HBG crushed aggregates of Grading-I as per table 500-17 of specification 507 of MoRT&H (5th Revision), premixed with bitumen binder VG-40 Grade @ 5.2 % of mix and filler, transporting the hot mix to work site, laying with Hydroststic paver finisher with sensor to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specification 507 (5th Revision) complete for finished item of work in all respects as directed by Engineer-in-Charge
5902.36
10964
64715422.82
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH0 to 3.00 m Depth
9210.6
133
1232101.96
... More
Supply transportation and laying of 50 Sqmm 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt
160
489
78366.4
... More
Supply and Laying of Warning tape in excavated trenches in two layer ,one Yellow colour tape at 100 mm and 250mm width Below FRL and Red colour tape at 400 mm and as directed by engineer-in-charge - 225mm width
15592.26
29
452175.54
... More
Cost of Laying, Jointing, Hydrostatic Filed Test Pressure, Including Cost of Site Welding, Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testing etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.1900mm dia MS pipes 3LPE Coated 20mm thick
500
8016
4008335
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers for PCC Bedding of Pipe Encasing, Valve Chambers & Thrustblocks
42.73
5138
219548.88
... More
Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.
24
4763
114332.16
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityPrecast Slab
11.7
5932
69414.11
... More
Providing fitting and fixing of mild steel 16 mm M.S.Rod welded to M.S.Flat @800 c/c and bar complete as per drawing and technical specifications Clause 1208.2MORD / 1900 & 2703 MORTH and as directed by Engineer-in-charge.
12170.43
178
2176924.81
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete and as directed by the Engineer in Charge. for Valve Chambers & Thrustblocks
0.01
91446
914.46
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)500mm dia
11
594
6537.3
... More
Manufacture, supply and delivery of submerged ARC welded M.S Pipe having beveled ends from plate or coil conforming to IS-3589 and/or IS-5504 with its latest revision / amendment with inside 406 micron thick food grade epoxy coating and outside 3LPE coating conforming to DIN 30670 for the specified thickness & inner diameter of pipe, external field joint coating with polyolefin backing and internal field joint coating with chemically cured 2 part epoxy based solvent free liquid coating material for Drinking Water NSF approved etc., complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge including transportation1900mm dia MS pipes 3LPE Coated 16mm thick
440
61841
27210356.8
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH3.0 m To 6.0 m Depth with dewatering
48752.3
160
7802805.62
... More
Environmental and Social Management Plan as per Standard norms and guidelines including cost of all materials, machinery, labour, all operations for finished item of work, as directed by Engineer in Charge
1
19720711
19720711.6
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying complete and as directed by the Engineer in Charge.
15.92
91446
1455820.8
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority For Thrustblocks
1.98
5580
11050.04
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge500mm dia DI pipes
69
483
33364.95
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation. 500mm dia
54
3542
191316.06
... More
Laying of SN8 structured wall (External Annular Corrugated & Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth & alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe & sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detail engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge. (Payment to be made on the basis of actual finished length of pipe line). - 500mm DWC pipe
338
753
254605.26
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authority - a) Raft
6867.55
5584
38354305.29
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHb) 3.0 m To 6.0 m Depth including dewatering
213.36
160
34148.27
... More
Supply of the HDPE Electrical pipe conduits with permanent Lubricant inner layer with ribs , dimensional ratio of 13.5, deflection not greater than 5% when exposed to the normal operating temperature 90 degrees centigrade under the overburden soil pressure and other physical properties confirming to ASTMF 2160 and / or NEMA TC 7 ( The expected service life of HDPE Pipe conduit and accessories shall not be less than 50 years) including transportation 225 mm dia Silicore Coated
11611
3297
38282744.21
... More
Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 / 40 kg laid dry complete as per drawing and technical specifications Clause 1301 MORD / 2503 MORTH
38.37
2106
80812.59
... More
Providing and Laying kerb painting with with two coats on the surface with synthetic enamel paint grade-I (IS:164) in all shades on new plastered concrete surfaces after back filling including cost, conveyance of all materials to site and labour charges etc complete as per drawing, Technical Specifications Clause 803 (5th Revision) and as directed by the Engineer in Charge
25481.66
131
3346761.22
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete and as directed by the Engineer in Charge.
0.36
91446
32920.57
... More
Form work for Drain side walls including cost & conveyance of all materials to site and labour charges, other incidental hire and operational charges of all T&P etc., complete as per approved drawings etc., complete and as directed by Engineer-in-charge
11731.59
568
6664481.65
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.1000mm dia
174
11173
1944183.78
... More
Providing & fixing junction boards of size 1500 x 1200 mm made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of Green Colour & White Letters and fixed over 4MM Alluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer -in-Charge.
56
29525
1653400
... More
Supplying and installation of delineators (Roadway indicators) not less than 800mm high above ground level. The delineator shall have a core and shell construction which shall be made of tough, high impact resistant, injection-molded, thermoplastic outer body. The inner core shall consist of powder coated or painted Mild steel of minimum thickness 1.0mm. The delineator should have top retro-reflective unit consisting of white color micro prismatic non metallic retro-reflective sheeting of minimum exposed area of 125 cm2 and bottom retro-reflective unit consisting of red color micro prismatic non metallic retro-reflective sheeting of minimum exposed area of 35 cm2 confirming to ASTM D4956 type XI standards and as per IRC -79. The delineators shall be fixed to the ground by inserting the root of the delineator up to the marked portion and by firm concrete filling as per the instructions by engineer in-charge.
24
2048
49152
... More
Supply installation, testing and commisision of 21Kva Three Phase Smart Streetlight CCMS Web Controller –Wireless Street light monitoring and controlling system with 63A MCB for incoming and 9 Nos of 20Amps SP MCB with 2 outputs with 1 no of buffer SP MCB of 3 Nos, includes inbuilt RF gateway. It uses GSM/GPRS/4G technology to receive commands and send data from and to the web software with 4G with 2G fall back, Micro HDMI port to be provided. MIPI CSI Camera port to be provided. Minimum of Two USB 3.0 ports to be provided. In-built GPS to be provided It should support GPS/GLONASS/BD, Switching Components, Automatic MCB Trip Rectification for nuisance MCB trips, Controller should have SPD of 20kV/10kA for the Panel. Metering: ISI Energy Meter with Class 1.0 accuracy and Complaint to IS:13779. Ability to communicate securely via cellular networks (GSM / GPRS /2G /3G /4G). Ability to send data regarding energy usage, ON/OFF status etc. from controller. Ability to remotely upgrade the CCMS device firmware from central server. Design Life should be More than 10 years. Inbuild Battery backed with RTC based timer for Bypass operation for up to 8 Hours. Enclosure: CRCA Metal Enclosure with IP65 and IK10 with size of 700x500x145mm CRCA 1.2 thickness with Single Door RAL 7035 Powder coating. Test report: Controller should be type- tested with NABL lab and the test report need to be submitted.Communication Charges per panel per annum included for the warranty period of 2 years,including CCMS Software charges, and Supply of Stand for 3 Phase panel, 6.2 feet height, MS powder coated with 5mm Thick and approved byengineer in charge
16
46300
740800
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete for levelling course as directed by the departmental officers including Taxes
4.58
5138
23532.27
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985).500mm dia Np4
54
410
22185.9
... More
Providing and applying tack coat with bitumen Emulsion (RS-1) (Bulk) using Emulsion pressure distributor at the rate of 2.5 kg to 3.0 kg / 10 sqm over granular surface treated with primer cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.
45322
16
748719.44
... More
Supply, Fixing and Fabrication of stainless steel railing works using stainless steel of grade 304 and stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish etc complete as per drawing and as directed by the Engineer-in-charge
988.98
716
709009.65
... More
Earthwork excavation by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete including charges for finished item of work as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge 3-6m incl. dewatering
21285.4
160
3406728.27
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
755.78
115
87012.95
... More
Providing and constructing of precast RCC circular manhole of grade M-30,Type- C, 1500 mm internal diameter according to drawing, fixing (Slant portion of 1.5 m and raft 0.33 m) with cover and frame (heavy duty,24x24 HD-20 grade designation) , total weight of cover and frame to be not less than 182 kg. Plastering with SRC cement motor 1:3 including,steel, centering shuttering all complete as per standard design and as directed by Engineer in charge.
1
43953
43953.67
... More
Supplying of hot applied thermoplastic road marking compound, 2.50mm thick including reflectorising glass beads @ 250gms with Reflectorising Glass beads on Bituminous surface at 250gms per Sqm area, thickness of 2.50mm is exclusive of surface applied glass bead as per MoRTH section 803.40 & IRC 35 -2015 , the material should be satisfy MoRTH specifications 803.40 and must comply with the following a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab .In case the department approves the white index box of any vendor, the department engineer may carryout random checking of the appplied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department), b)The Luminance factor of the material should be in the range of 80-85% at 45 degrees centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262 part-1, 1989 and should pass at the range of 0 degree centigrade to '-10 ' degree centigrade. D) Adhesion : Strong E) Softening point 102 degree centigrade F) Dried film finish : Smooth and uniform G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS 164-1961 (1st revision reaffirmed in 1986) and clause conforming to IRC 35-2015 & MoRTH section 803.4-Directional Arrows, Lettering etc. as per drawing No.61 of MORTH Type Designs for Intersections
4
560
2240
... More
Laying and Providing End caps for DI & MS crossing pipes using Socket Flanges and Blank Flange joints.Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) (ex-works) Excluding Transportation etc., complete and as directed by Engineer-in-chargeFor DI pipe crossings upto 500mm)
5
154
770.1
... More
SSupply and Transportation of double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II.
Makes: DURA LINE (Dura Guard)/Precision/CPE or any ISI approved make having ISI markas directed by the Engineer-in-charge.Outer dia 160 mm and Inner dia 136 mm
31477.81
529
16665926.5
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers PCC bedding for Power Conduit crossings
52.56
5138
270055.91
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete for levelling course as directed by the departmental officers.
8.43
5138
43313.76
... More
Supplying of hot applied thermoplastic road marking compound, 2.50mm thick including reflectorising glass beads @ 250gms with Reflectorising Glass beads on Bituminous surface at 250gms per Sqm area, thickness of 2.50mm is exclusive of surface applied glass bead as per MoRTH section 803.40 & IRC 35 -2015 , the material should be satisfy MoRTH specifications 803.40 and must comply with the following a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab .In case the department approves the white index box of any vendor, the department engineer may carryout random checking of the appplied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department), b)The Luminance factor of the material should be in the range of 80-85% at 45 degrees centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262 part-1, 1989 and should pass at the range of 0 degree centigrade to '-10 ' degree centigrade. D) Adhesion : Strong E) Softening point 102 degree centigrade F) Dried film finish : Smooth and uniform G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS 164-1961 (1st revision reaffirmed in 1986) and clause conforming to IRC 35-2015 & MoRTH section 803.4-Lane / Center line / Edge marking / Transverse marking and any other marking
7559
560
4233040
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete
2337.8
115
269150.91
... More
Clearing the light Jungle like Shrub, bushes, grass, wild vegetation and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work
32252
3
102561.36
... More
Supply , Delivery, & Fixing of CI Double Flanged Fire Pipe Sleeve 400mm Dia including loading, transportation, unloading and stacking at site of work etc, complete as directed by engineer in charge
931.5
92
86228.96
... More
Filling of Median / Island with approved material obtained from selected borrow source as per drawing, Technical Specifications Clause 408 (5th Revision) with selected borrowed useful earth from outside road boundary by mechanical means up to SDR with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning and compacting to meet requirements including all hire and operational charges of T&P, etc, complete for finished item of work and as directed by the Engineer in Charge
656.46
2016
1323469.31
... More
Foundation and erection charges with special T&P, for 4 Mtrs long pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.45Mtrs x1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost
and conveyance of materials etc., complete.
976
6613
6454805.28
... More
Stop sign - Octagon of size 1200 mm complete including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading chages necessary for satisfactory completion of the work as per drawings, Technical Specifications Clause No. 801 (5th Revision) and as directed by the Engineer in Charge
52
3030
157599.52
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authority - b) RCC Duct wall
7017.13
5397
37874818.83
... More
Supply and laying of 25mm x 6mm GI Flat (1.18Kgs/1Mtr) Earth Strip in horizontal run in Ground including, revitting,soldering,saddles,making connection etc as required
48
110
5290.08
... More
Manufacture, supply, delivery, Laying of 16mm End Cap including transportation etc., complete and as directed by Engineer-in-charge
98
-
68.6
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete and as directed by the Engineer in Charge.
1.41
91446
128938.9
... More
Supply & Placing of chequered Cement concrete heavy duty tiles confirming to IS 1380 using aggregate cement pigments of of 25 mm thick(any shade-300 x300 mm) set over base coat of cement mortar 1:6 12 mm thick over cc bed already laid or RCC roof slab,including near cemnt slurry of honeylike consistency spread at the rate 3.3 kgs/sqm and jointed with need cement to full depth mixed with pigment of matching shade including cost of all materials like cement,sand,water and tiles etc ,complete finished item of work.
6546.09
1074
7036784.91
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
6123.82
638
3907180.87
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
158.48
638
101114.99
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authority - a) Raft
142.78
5584
797406.31
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete
85825.58
115
9881099.03
... More
Manufacture, supply, & delivery of (DWC) structured wall polyethylene/polypropylene piping system with nonsmooth external annular corrugated and smooth internal surface (Double Wall) for nonpressure sewage & Drainage application pipes of standard length 6 m, grade conforming to IS 16098 (part-II: 2013) including transportation to anywhere in A.P etc. complete as per drawing, specifications & detail engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge. (Payment to be made on the basis of actual finished length of pipe line).500mm dia
338
3294
1113655.92
... More
Plain Cement Concrete PCC M15 using 40mm graded hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete for levelling course as directed by the departmental officers - PCC - M15 For Benching (with minimum cement quantity of 275kgs per cum for )Note : The rate shall be adjusted as per the approved design mix by the competent authority
10.35
5313
54995.24
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH 0 to 3m depth
111.3
133
14888.6
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHb) 3.0 m To 6.0 m Depth including dewatering
69.93
160
11192.3
... More
Supply, providing & fixing of 16 mm M.S.Rod weleded to M.S.Flat as per approved drawings as instructed by engineer in-charge.
1228
178
219652.36
... More
Supply delivery and laying of Smooth Wall 40mm outer dia and 33mm inner dia Permanently Lubricated HDPE Telecom Duct with Silicore inner layer and 4mm PP Rope in 500mts Coil format confirming to TEC GR.No.TEC/GR/TX/CDS-008-03, March-2011 with Amdt. No.1, dt:25/28.03.2013 etc., complete and as directed by Engineer-in-charge40mm dia
96216
55
5291880
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge100mm dia DI-K7 pipe
45
179
8084.25
... More
Maintenance of hedge/shrub planting: Trimming of hedges/shrubs (once in 30 days) and application of fertilizers, insecticides, Fungicides (once in a month @ 20 gms/pit/sqmt) etc., by manually excluding cost of fertilizers it including all operational, incidental, labour charges, for complete of work.
123144
6
784427.28
... More
Lowering Laying and jointing of 225mm HDPE electrical pipe conduits with silicore lubricant inner layer having ribs with coupler and as per drawing in ready made trenches true to alignment and gradient and maintain specified spacing with spacers (excluding cost of spacer ) including all materials labour charges and all other incidential charges etc complete for finished item of work as per drawing and as directed by the Engineer-in-Charge.
11611
133
1553900.13
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authoritya) Raft
22.88
5584
127781.6
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH0.0 m To 3.0 m Depth
47469.41
133
6349982.98
... More
Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution and excluding cost of steel and its fabrication charges for finished item per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH and as directed by the Engineer-in-Chargeii) Drain Side Walls concrete M-30 grade excluding formwork. Minimum quantity of 407 kg cement to be used per cum of concrete.
9720.88
5397
52468255.38
... More
Supply & Laying following size 'B' class, G.I pipe confirming to IS:1239 P-1 (2004) with accessories like bend, socket etc. for laying of 80mm dia G.I pipe
23.12
1184
27374.08
... More
Cost of Ficus religiosa tree (21"x21") /Equivalent
532
375
199500
... More
Supply , Delivery & Fixing of MS Chequerred Plate 10mm thick including one coat of primer loading, transportation, unloading and stacking at site of work etc, complete as directed by engineer in charge
1372.97
107
148184.65
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985).600mm dia
193
456
88148.89
... More
Conveyance charges for internal transprot upto 100 mt with head load and application of the red soil and FYM into the pit and it including all operational, incidental ,labour charges, required tools, overheads & contractors profit complete for finished item of work. (0.37 cubic per pit )
2530
48
122224.3
... More
Supply and laying of 3 core 2.5 Sqmm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990..Makes: Finolex / RR kabel / Havells/ Finecab /KEI/Polycab/ Gloster/ Goldmedal/GM// Fortune Arrt/Anchor /Million
10980
171
1883399.4
... More
Supply, Delivery & Fixing of FRP Gratings of 38x38mm mesh with 7/5mm rib of 38mm thick including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete.
1515
2447
3707205
... More
Laying and Jointing of 7 Way 40mm Multi Duct in ready made trenches true to alignment and gradient with push fit coupler including all sundries but excluding cost & conveyance of pipes from source of supply and jointing materials etc, complete and as directed by Engineer-in-charge
55622.46
40
2260496.77
... More
Earthwork excavation by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete including charges for finished item of work as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge 0-3m
78007.74
133
10435095.38
... More
watch and ward 5 member per month for 12 months = 60 member
60
15000
900000
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH - a) 0.0 m To 3.0 m Depth
2700.92
133
361302.07
... More
Providing, cutting, bending and fixing in position of HYSD bars of Fe-500 D grade reinforcement in reinforced concrete structures complete as per drawing, Technical Specifications Section 1600 (5th Revision) and as directed by the Engineer in Charge
2088.73
91446
191006066.24
... More
Supply, delivery, laying and jointing of MDPE Blue Pipe 40mm as per ISO 4427 Rev 1. For conveyance of potable water .The pressure rating of 40mm will be 4kg/cm. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated laboratories to be produced etc., complete and as directed by Engineer-in-charge
40.23
95
3821.85
... More
Supply of 12" (300mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades with mark.
Makes: Crompton / Almounard / Havells Ventil Air-DB
5
3758
18791.9
... More
Providing and fixing Village name board size 600x800 mm made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of Green Colour & White Letters and fixed over 3MM Alluminium Composite Material sheet having minimum 0.30mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer –in-Charge.
4
8236
32944
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 3.0 m To 6.0 m Depth including Dewatering
593.55
160
94997.68
... More
Supply, Delivery & Fixing of FRP Gratings of 38x38mm mesh with 7/5mm rib of 38mm thick including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete.
30.6
2447
74878.2
... More
Aliliment and fixing planting point with 0.45 mtr length sticks incl mateal cost, transport and overheads and contractor propit complte for finised work
2530
1
4604.6
... More
Earthwork excavation in soils up to SDR by mechanical means including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines , grades and cross sections etc., and transporting to the embankment location with all lifts etc., with disposal upto 1000 metres complete for finished item of work for trench cutting as per MoRT&H specification 301 (5th Revision) and as directed by the Engineer-in-Charge.
101474.67
136
13844189.23
... More
Providing and applying tack coat with bitumen Emulsion (RS-1) (Bulk) using Emulsion pressure distributor at the rate of 2.0 to 3.0 kg /10 sqm over bituminous surface cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.
236094.4
15
3614605.26
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete
39459.2
115
4542937.7
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)500mm dia DI-K7 pipes
382
594
227022.6
... More
Providing and constructing M-30 RCC circular manhole of grade M-30,Type- D , 1800 mm internal diameter according to drawing, fixing (Slant portion of 2 m and raft 0.4 m) with cover and frame (heavy duty, 24x24 HD-20 grade designation) , total weight of cover and frame to be not less than 182 kg. Plastering with SRC cement motor 1:3 including,steel, centering shuttering all complete as per standard design and as directed by Engineer in charge.
6
63949
383695.02
... More
Cost of Tabebuia Avallenda (21"x21")/Equivalent
1466
450
659700
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.300mm dia
4248
1881
7990488
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
2290.05
638
1461120.6
... More
Cost and Conveyance of Farm Yard Manure or dry cow dung powder including loading, unloading, internal transport and application. of the FYM into the pits/trenches and it including all operational, incidental,labour charges, required tools, overheads & contractors propit complete for finished item of work. (0.028 cum mtr farm yard Manure for each. pit'.) Rs.1761 for cubic Mtr. Tall Plants.
2530
49
124121.8
... More
Manufacture, supply and delivery of M.S Spirally Welded Pipes conforming to IS: 3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers of 6mm dia. M.S. Rings at each end of the pipe and out coating with cement mortar (1:3) 30mm thick by short crating or guniting duly providing wire mesh of size 50x50x3mm including cost of all materials, labor charges, transportation to anywhere in AP. For Crossings. 1900mm dia MS pipe 16mm thk
60
61583
3695032.2
... More
Manufacture as per BIS: 12592(part- 1&2), Supply & and delivery of Heavy Duty Manhole Covers and frames with ISI marking any where in A.P., F.O.R destination including, loading, unloading & stacking.24x24 HD-20
5
2147
10736.6
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete for levelling course as directed by the departmental officers
1.82
5138
9351.25
... More
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia PVC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing face. Complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 MORD / 2706 & 2200 MORTH.
7208.25
236
1704030.3
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 500mm dia DI pipes
69
543
37472.52
... More
Manufacture, Supplying and fitting Ductile Iron Double Chambered Restrained Joint fittings confirming to IS 9523 : 2000 (restrained joints are designed and tested as per ISO 10804) of Class K-12 (Alternative and to avoid concrete thrust blocks along with minimum length of Restrained joint DI pipes at bends) including rubber gasket confirming to IS 5382 : 1985 and locking bars & rubber gaskets etc completeFittings upto 500mm dia
500
366
183490
... More
Supply delivery and laying of Smooth Wall 40mm outer dia and 33mm inner dia Permanently Lubricated HDPE Telecom Duct with Silicore inner layer and 4mm PP Rope in 500mts Coil format confirming to TEC GR.No.TEC/GR/TX/CDS-008-03, March-2011 with Amdt. No.1, dt:25/28.03.2013 etc., complete and as directed by Engineer-in-charge
500
55
27500
... More
Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased allround with cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) with all centering and shuttering required, cutting holes in walls and making good with brick work in cement mortar 1:4 (1 cement : 4 coarse sand) plastered with cement mortar 1:3 (1 cement : 3 coarse sand) on inside of the manhole wall, lead caulked joints between sand cast iron pipes and fittings, stiff cement mortar 1:1 (1 cement : 1 fine sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications
150 mm dia sand cast iron drop connectionFor depths up to 60 cm
2
15841
31682.14
... More
Manufacture, supply, delivery, Laying & Jointing of 16mm PE flexible pipes including transportation etc., complete and as directed by Engineer-in-charge
4269
8
36713.4
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authority - d) Stair case Steps
1.13
5584
6310.89
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authority - c) Slab
5234.93
5932
31057949.75
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHb) 3.0 m To 6.0 m Depth with dewatering
526.16
160
84211.91
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete
2065.35
115
237783.75
... More
Manufacture, supply, & delivery of HDPE pipes grade PE 100 (10 kg/sqcm) conforming to IS 4984 - 1995 including transportation to any where in A.P.OD 63mm dia HDPE pipes
1177
190
224653.99
... More
Providing and fixing Mandatory (Give way sign) sign boards size 900 mm equilateral triangle made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of White colour and letters/logos done by screen printing in Black colour, boarders by screen printing in Red colour and fixed over 4MM Aluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading chages necessary for satisfactory completion of the work as directed by Engineer -in-Charge.
52
6958
361816
... More
Provision for Transportation of 7" x 8" bag size (2 kg/bag) 307860 Nos
615.72
1000
615720
... More
Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of up to 16 sqmm.Makes:Dowels/Jainson/Comet.
11712
13
159634.56
... More
Providing and constructing inlet chambers of 0.6mx0.6mx0.6m dimensions with RCC M25 grade of concrete for Raft and walls and M15 grade of concrete for Levelling Course, with galvanised gratings and PVC/HDPE pipe 150mm dia as per drawing and Technical Specifications Section 1500, 1600 & 1700 (5th Revision) and as directed by the Engineer in Charge.
976
11605
11326821.6
... More
Supply , Delivery & Fixing of MS Chequerred Plate 10mm thick including,one coat of primer ,loading, transportation, unloading and stacking at site of work etc, complete as directed by engineer in charge
839.95
107
90655.8
... More
Construction of footpath/separator by providing 60mm paver blocks-M35 grade, 30mm sand fill below it including cost, conveyance of all materials to site and labour charges etc complete as per the technical specification of MoRTH& APDSS as per drawings and as directed by the Engineer -in- Charge
43860
761
33407284.8
... More
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames of H.D.-20 with 500mm dia. Clear opening with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking etc., as applicable.
763.6
2259
1725659.64
... More
Hire charges of tractor mounted water tanker for filling sump by 5000 ltrscapacity tanker(150 waterings for oneyear ie. once in a three days @ 5litres per sqm/plantper each time)and it including·all operational, incidental,labourcharges,requiredtools,overheads&contractors profit complete for finished item of work
5218
691
3606629.42
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete for levelling course as directed by the departmental officers i
9.02
5138
46345.21
... More
Providing and applying prime coat with bitumen emulsion (SS-1) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.85 kg/sqm using mechanical means for finished item of work as per MoRT&H Specification 502 (5th Revision).
174407.3
77
13492148.73
... More
Supply and Transportation and laying of Outer dia 63 mm and Inner dia 51mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Makes:DURA LINE (Dura Guard) or its equivalent make and as directed by the Engineer in Charge
36696
174
6420699.12
... More
Transport of 21''x21'' size bag plants from Nursery to Plantation site including loading and unloading 10 km lead
2530
31
79340.8
... More
Providing Spacers of Acrylonitrile Butadiene Styrene (ABS) material make with 10mm thk for HDPE Pipe conduits including placing, positioning at 2 mtr interval as directed by engineer-in-charge.Spacers for ICT : DWC- 2 & 7 Way-6
52
1440
74880
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete for levelling course as directed by the departmental officers
210.87
5138
1083460.6
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 100mm dia DI-K7 pipe
45
79
3578.85
... More
Filling with Red soil (Red soil in this context it is defirn:;g as sandy
As per loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable;·fertile, slightly acidic·:or neutral)in pits/trenches and including cost and conveyance of red s /1' to work
site and it including all operational, incidental ,labour charges, required tools, overheads & contractors profit complete for finished item of work.
2530
427
1081575
... More
Providing RCC M-30 grade for Manhole Type-D Wall Extra Depth for every 1.0 m depth beyond 2.0 m and inling with SRC cement motor of 1:3. With Wall thickness 200mm including Formwork & Reinforcement HYSD FE500 including cost of labour,material, centreing charges etc complete as per drawing and specification and as directed by the Engineer -in-charge (with minimum cement quantity of 407kgs per cum for M30grade)Note : The rate shall be adjusted as per the approved design mix by the competent authority
20.98
30670
643476.11
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
7599.77
133
1016621.23
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
56.53
133
7562.02
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)100mm dia
11
66
731.83
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
177
638
112931.31
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying complete and as directed by the Engineer in Charge.
12.97
91446
1186055.01
... More
Supply transportation and laying of 10 Sqmm 4 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt
18524
225
4169196.68
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying complete and as directed by the Engineer in Charge.
1342.24
91446
122742519.31
... More
Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of 35 sqmmMakes:Dowels/Jainson/Comet
192
27
5235.84
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
145.02
638
92527.11
... More
Supply, Delivery & Fixing of FRP Gratings of 38x38mm mesh with 7/5mm rib of 38mm thick including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete.
533.88
2447
1306404.36
... More
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery and Fixing of Heavy Duty manhole covers and frames - 24x24 HD 20 with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking at site etc., complete
60
2147
128839.2
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) and as per latest revisions and specifications and as directed by the Engineer - in - charge.
32819.62
638
20939902.15
... More
Earth work excavation of Trench of size in all types of soils for covering of UG cables/HDPE pipe and refilling of Trench.
6605.28
395
2611595.61
... More
Providing fitting and fixing mild steel plate size (0.15x0.01) (1.24t)and bar complete as per drawing and technical specifications Clause 1208.2MORD / 1900 & 2703 MORTH.
10232.88
1334
13655471.37
... More
Supply Delivery and fixing of Double fixed Louvers ventilator window Size of 4’ 0” x 2’ 0” (1219.2mm x 609.6mm) outer frame box section size of 100 x 45mm, flymesh shutter frame section size 52 x 25 mm, vertical mullion section size of 100 x 60 mm
29
6253
181347.73
... More
Supply, fabricating , installing structural steel supports forEarthing Mat with MS Channels, Angles, Flats, Rods, as required at site with neccesary welding ,anchor fasteners, Clamps, threaded rods, nuts, bolts,washers etc complete as per Drawing
13523.34
107
1459574.09
... More
Supply Deiivery and Fixing of Double fixed Louvers ventilator window Size of 4’ 0” x 2’ 0” (1219.2mm x 609.6mm) outer frame box section size of 100 x 45mm, flymesh shutter frame section size 52 x 25 mm, vertical mullion section size of 100 x 60 mm
20
6253
125067.4
... More
Supply and laying of 8 SWG GI wire(0.104Kgs/1Mtr) Earth wire/Strip in horizontal run in Ground including,revitting,soldering,saddles,making connection etc as required
36696
11
416866.56
... More
Manufacture as per company’s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete
7728
188
1457500.8
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityc) Slab
3.73
5932
22129.46
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.1600mm dia
54
23187
1252122.3
... More
Vibrated cement concrete M 15 Grade Concrete as levelling coarse using 40mm , 20mm and 10mm size HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed and compacted by vibration including curing for 14 days including cost, and conveyance of all materials to site and all labour charges ,centering, machine mixing, laying in position, Compacting , Vibrating and curing including all other incidental and all other operational charges of T&P required etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MoRTH .Minimum quantity of 275 kg cement to be used per cum of concrete.
2979.94
5313
15834060.19
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authority - c) Slab
141.22
5932
837834.25
... More
Internal transportation of larger bag size 21''x21'' for 100 no. of plants
2530
16
42251
... More
Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm Type-A aggregates using VG-30 grade bitumen @ 22 kg/10 sqm and colour pigment to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade as per MoRT&H Specification 508 (5th Revision) complete for finished item of work in all respects as directed by Engineer-in-Charge
45085
191
8640540.25
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete and as directed by the Engineer in Charge
14.03
91446
1282987.8
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authority - c) Slab
32.18
5932
190918.47
... More
Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of 50 sqmmMakes:Dowels/Jainson/Comet
64
35
2254.08
... More
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work , lowering carefully into trench and laying them true to alignment and gradient ((Reference to specifications. BIS No.3114/94) etc complete below 500mm dia
336
154
51750.72
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge.100mm dia DI-K7 pipe
247
1377
340143.7
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authority - a) RCC Duct wall
255.36
9942
2538812.1
... More
Plain Cement Concrete PCC M15 using 40mm graded hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete for levelling course as directed by the departmental officers - PCC - M15 For Benching (with minimum cement quantity of 275kgs per cum for )Note : The rate shall be adjusted as per the approved design mix by the competent authority
1.13
5313
6004.31
... More
Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased allround with cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) with all centering and shuttering required, cutting holes in walls and making good with brick work in cement mortar 1:4 (1 cement : 4 coarse sand) plastered with cement mortar 1:3 (1 cement : 3 coarse sand) on inside of the manhole wall, lead caulked joints between sand cast iron pipes and fittings, stiff cement mortar 1:1 (1 cement : 1 fine sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications
150 mm dia sand cast iron drop connectionExtra for depths beyond 60 cm of sand cast iron drop connection complete
3.34
4139
13825.33
... More
Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem specification including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification 406 (5th revision) for finished item of work.
35670.48
2825
100769819.41
... More
Manufacture, supply, delivery, Laying of 16mm Start Connector/takeoff including transportation etc., complete and as directed by Engineer-in-charge
98
-
68.6
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
4808.14
133
643184.89
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authority - b) Walls-250mm thick
292.89
9942
2911938.74
... More
Hedge / shrub planting: Digging the trench of size 0.3 mtrs. depth, refilling with red garden soil including cost of red garden soil and farmyard manure at 4:1 ratio, internal transportation of plants, planting etc., including the application of fertilizers and pesticides etc., (@ 20 gms/pit/sqmt) and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work, but excluding the cost of the fertilizers (@ 20 gms/pit/sqmt) and plant material etc., - unit 1 Sqmt of work. (* 10 No./Sqm of plants & bag size shall be arrived based on the spacing 0.3 c/c as per the design.) (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)
30786
537
16560097.26
... More
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in AP. - HDPE Tees63mm dia
39.23
214
8423.86
... More
Supply & Laying following size 'B' class, G.I pipe confirming to IS:1239 P-1 (2004) with accessories like bend, socket etc. for laying of 150mm dia dewatering pipe.
30.7
2639
81017.3
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge100mm dia DI-K7 pipe
247
66
16432.91
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying complete and as directed by the Engineer in Charge.
22.52
91446
2059364.6
... More
Supply & Fixing of 20mm thick Compressible Fiber board joint filler in expansion joint complete as per drawing, Technical Specifications Section 2604 (5th Revision) and as directed by the Engineer in Charge
170.39
696
118669.82
... More
Brick Masonry in CM (1:4) with Modular Bricks 19 x 9 x 9 cms 2nd class complete excluding pointing and plastering as per drawig and technical specifications clauses 600,1202 & 1203 MORD/1300 MORTH including cost and conveyance of materials to site with all leads & lifts , all other incidental and operational charges etc., complete and as directed by the Engineer-in-charge
35.65
9158
326503.02
... More
Supply, Transporation, installation, testing and commissioning of LED decorative post top of 45W with a system lumen output of 4950 lumens and a minimum system efficiancy of 110lm/W with street light optics. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. the luminaire should have a color temperature of 5700K and CRI70. The luminare shall meet IP66 with THD10% and PF0.9, IK08 protection. The luminaire shall hav eclosed diffused optics with polycarbonate diffuser board. the total power consumption should not exceed 45W (including driver) with glass reinforced polymer (GRP) composite type Conical pole of height 4 mtr including decorative base plate and internal junction box including labour charges etc., complete and as directed by the departmental authorities. Makes:Klite/Phillips/Reytek/lightman or equivalent. Design, model shall be as approved by the departmental authorities
976
39600
38649600
... More
Forming Subgrade with borrowed useful earth from outside road boundary by mechanical meanswith all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-1 & 300-2 of MoRT&H, including all hire and operational charges of T&P , etc., complete for finished item of work as per MoRT&H specification 305 (5th Revision) , satisfying the Free Swell Index value less than 50%, soaked CBR value not less than 8% and other reqirements from clause 305 (5th Revision) and as directed by the Engineer in Charge.
86077.43
1443
124279454.21
... More
Providing and Supply of FRP Gratings of 38x38mm mesh with 7/5mm rib of 38mm thick including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete but excluding all taxes.
16.96
2447
41501.12
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
3532.81
133
472583.99
... More
Manufacture, supply,delivery and fixing of GI Electrode of 40mm Dia and transportation anywhere in Andhra Pradesh,
255
540
137804.55
... More
Supply & Placing of chequered Cement concrete heavy duty tiles confirming to IS 1380 using aggregate cement pigments of of 25 mm thick(any shade-300 x300 mm) set over base coat of cement mortar 1:6 12 mm thick over cc bed already laid or RCC roof slab,including near cemnt slurry of honeylike consistency spread at the rate 3.3 kgs/sqm and jointed with need cement to full depth mixed with pigment of matching shade including cost of all materials like cement,sand,water and tiles etc ,complete finished item of work.
2228.91
1074
2395989.09
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
2585.25
638
1649467.06
... More
Forming embankment with borrowed useful earth from outside road boundary by mechanical means with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-1 & 300-2 of MoRT&H, including all hire and operational charges of T&P , complete for finished item of work as per MoRT&H specification 305 (5th Revision) , satisfying the Free Swell Index value less than 50%, soaked CBR value not less than 8% and other reqirements from clause 305 (5th Revision) and as directed by the Engineer in Charge.
160650.67
1292
207718103.3
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 complete and as directed by Engineer-in-charge
4248
262
1114420.32
... More
Supply transportation and laying of 35 Sqmm 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt
1600
377
603696
... More
Providing and Laying Plain Cement Concrete M 20 kerb with top and bottom width 115 and 465mm respectively, 365mm over WMM kerb stone laid with kerb laying machine as per drawing including cost, conveyance of all materials to site and labour charges etc complete as per Technical Specifications Clauses 409 and Section 1700 (5th Revision) and as directed by the Engineer in Charge.minimum quantity of 344 kg cement to be used per cum of concrete. -Grade M 20 for Kerb "L" Type Section over WMM
14620
477
6982073.4
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)500mm dia
2
483
967.1
... More
Refilling Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
5233.74
638
3339283.13
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation .500mm dia DI-K7 pipes
382
9851
3763104.92
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 1600mm dia
54
1715
92641.86
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority
6.08
5580
33931.45
... More
Cost of Bauhinia blakeana tree (21"x21") /Equivalent
532
430
228760
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
4814.32
133
644011.59
... More
Maintenance of Palms/Tree planting: Trimming (once in month) and application of fertilizers, insecticides, Fungicides @ 20 gms/pit/sqmt) (once in quarterly) by manually excluding cost of fertilizers, it including all operational, incidental ,labour charges, for complete of work.
10120
6
69828
... More
Supply & Laying following size 'B' class, G.I pipe confirming to IS:1239 P-1 (2004) with accessories like bend, socket etc. for laying of 150mm dia G.I pipe
200
2639
527800
... More
Planting of bag plants 21''x21'' size @ 5145.61/100 no.
2530
51
130193.8
... More
Fabrication, Transportation and supply of hot-dip galvanized Octagonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with hinged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 10 Mtrs height Pole having dimensions Bottom 175 mm,. Top 70mm with 3mm thick, base plate 275 x 275 x16mm and 4 Nos of M24 x 750 long 'J' bolts along with template including Fabrication, Transportation and supply of 1.5 Mtr length single arm suitable size decorative galvanized bracket with PU paint colour finish etc complete. (The design should be approved from field Engineers) for finished item of work as directed by Engineer in charge. Make for Pole :Bajaj /Valmont /Laasma/ Transrail/Utkarsh/Skipper/Consoul /Surya/Vakrangee/Lysaght Pole
488
31412
15329192.64
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete
4829.4
115
556008.82
... More
Providing and fixing Object markers 48.3mmdia. MS pipe ,keep at 50cm above ground level with 3MM Alluminium Composite Material sheet having minimum 0.30 mm thick Aluminium skin fully covered with type XI of wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 reflective sheeting fixed in to trench of 30x30x30cm filled with CC M20 conforming to IRC-67:2012 & MORTH&H specification no 805 and approved drawing etc.,
56
1021
57176
... More
Vibrated reinforced cement concrete M 20 grade with batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed and compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MoRTH (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 347 kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authority
350.68
5124
1796908.87
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete for levelling course as directed by the departmental officers.
806.42
5138
4143426.28
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH6.0m with dewatering
63554.7
197
12563493.1
... More
Supply and delivery of 19:19:19 fertilizer 4 times each time 20 gms / Sqm (Once in 3 months i.e 4 times in a Year ( 2530 Nos x 4 x 20 gms)/1000/50 = 4 Bags &
(Once in 3 months i.e 4 times in a Year ( 32252 Sqm x 4 x 20 gms)/1000/50 = 52 Bags
56
1800
100800
... More
Providing of 7- Way 40mm Multi Ducts with Silicore Lubricant inner layer for ICT fibre cables comforming to ASTMF 2160 and /or equivalent indian standard.
55622.46
1085
60351481.55
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityb) Walls-300mm thick
158.62
9184
1456869.18
... More
Providing and fixing Mandatory / Regulatory sign boards size 900 mm circle made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of White colour and letters/logos done by screen printing in Black colour, boarders by screen printing in Red colour and fixed over 4MM Aluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all roundand fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground levelto the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The Signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer -in-Charge.
4
10231
40924
... More
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.-80mm Dia valve PN-1.6 (MPa)
8
11836
94692.16
... More
Provision for Transportation of 21" x 21" bag size (30 kg/bag) 2530 Nos
75.9
1000
75900
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985).1000mm dia
174
931
162105.36
... More
Providing Spacers of Acrylonitrile Butadiene Styrene (ABS) material make with 10mm thk for HDPE Pipe conduits including placing, positioning at 2 mtr interval as directed by engineer-in-charge.Spacers for ICT : DWC- 3 & 7 Way-6
19
1650
31350
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
86
115
9901.18
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)100mm dia
2
179
359.3
... More
Supply, transportation and fixing of LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass/polycarbonate diffuser, supply input voltage 120 - 270V AC, P.F 0.90, high power LEDs having System Efficacy = 120 lumens/watt and junction temperature 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70, etc., complete with earth connection and not less than two years warranty. a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) / GE- Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge) / Halonix (Modular/ Lumos-Super) / Havells (Endura Series)/Greenlites(HI-Lux) /Capart(Premium)/Polycab/Keselec / HPL(City Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Arrt (Leaf) / Rhino(GPSL06) b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG. - 180W LED Fixture
488
13931
6798659.84
... More
Providing and fixing of Route marker signs (450mm x 600mm) as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing
112
2590
290097.92
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHb) 3.0 m To 6.0 m Depth including dewatering
130.77
160
20929.74
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
5735.03
638
3659121.19
... More
Arrangement of transportation facility by four wheeler for purpose of site inspection and official use of the departmental officers and Engineers during execution period including fuel, maintenance charges & driver charges and the vehicle for not less than 3500 Km per Month and the vehicle should not be older than 5 years.
24
45000
1080000
... More
Supply and Laying of Warning tape in excavated trenches in two layer ,one Yellow colour tape at 100 mm and 250mm width Below FRL and Red colour tape at 400 mm and as directed by engineer-in-charge - 225mm width
5390.48
29
156323.92
... More
Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution and excluding cost of steel and its fabrication charges for finished item per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH and as directed by the Engineer-in-Chargeiii) Drain Slab concrete M-30 grade including formwork. Minimum quantity of 407 kg cement to be used per cum of concrete.
5575.96
5932
33081222.77
... More
Design, Fabrication, assembling, packaging, forwarding to site, installation, testing & commissioning of Outdor type panel with stand enclsoure consisting of 3Ph, , 415V, 50Hz, 3 nos of 200A fuse units, 9 no of 100A fuse units, RYB Indicators for incoming and outgoing phases Al. bus bar, floor mounting free standing totally enclosed compartmentalized front operational, vertical, dust and vermin proof, FRB Shrouding. LT panels fabricated with 2 mm thick for load bearing members, side sheet, removable top & bottom sheets, equipment mounting plate, front door & covers, partition and 3mm HRCA for undrilled gasket removable gland plate and base frame is ISMC -75.The panel shall be painted with texture finish electro static paint SIEMENS GREY RAL -7032 (powder coating).
8
39118
312948.8
... More
Supply, fabricating & fixing of anodised (20 to 25 micron) Aluminium ladder of 450mm wide with 2 nos rectangular section of 65 x 35 mm (3 mm thick) as vertical post and 25 mm bars steps at 300 mm c/c complete in all respect as per the specification and the direction of the Engineer.
25
1911
47775
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.600mm dia
193
4776
921916.61
... More
Manufacture, Supplying and fitting Ductile Iron Double Chambered Restrained Joint fittings confirming to IS 9523 : 2000 (restrained joints are designed and tested as per ISO 10804) of Class K-12 (Alternative and to avoid concrete thrust blocks along with minimum length of Restrained joint DI pipes at bends) including rubber gasket confirming to IS 5382 : 1985 and locking bars & rubber gaskets etc complete Ductile Iron Double Chambered Restrained Joint
Fittings upto 500mm dia
500
366
183490
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHc) 6.0m depth including dewatering
268.28
197
53033.59
... More
Manufacture as per company’s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc.
107
188
20181.27
... More
Construction of Granular sub-base by providing HBG material confirming to Grading - VI of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge.
44163.51
2033
89810472.3
... More
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work , lowering carefully into trench and laying them true to alignment and gradient ((Reference to specifications. BIS No.3114/94) etc complete below 500mm dia
187
154
28801.74
... More
Foundation and erection charges with special T&P, for 10Mtrs long Octagonal / Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.60Mtr x 0.60Mtrs x 1.40 Mtr size M20 cc work vibrated concreting mixing with necessary steel (15kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc., complete.
488
8908
4347372.4
... More
Supply and Installation of GI Fusible link Fire dampers 500 mm long with sleeve as per UL 555 Standard, Minimum width of damper shall be 225 mm.
0.8
9342
7474.05
... More
Supply, delivery & fixing of 150mm dia C.I double flanged pipe incl. cost of material,labour & trasporatation etc complete as per approved drawings as instructed by engineer in charge.
10968.26
92
1015331.83
... More
Forming embankment with Excavated material by mechanical means with all leads and lifts including conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-1 & 300-2 of MoRT&H, including all hire and operational charges of T&Petc., complete ,for finished item of work as per MoRT&H specification 305 (5th Revision) and as directed by Engineer-in-charge
244014.41
178
43507769.3
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements