Agricultural Marketing Department Tender

VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including centering scaffolding, shuttering For FOOTINGS

VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including centering scaffolding, shuttering For PEDESTALS (below plinth)

VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including centering scaffolding, shuttering For PLINTH BEAM

VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including Steel centering scaffolding, shuttering-Unsupported height upto 3.66mts For COLUMNS

VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including Steel centering scaffolding, shuttering-Unsupported height upto 3.66mts For LINTELS

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T P etc., complete for finished item of work. (APSS NO. 309 310) - Earth filling (ordinary soil)

Filling with HBG Stone Chips 2.36mm and below in trenches, sides of foundations basement from approved quarry consolidating deposited layer by watering and ramming, including all operational, incidental, labour charges, complete including cost and conveyance of HBG Stone Chips 2.36mm and below excluding seigniorage charges for finished item of work or as directed by the Engineer-in-Charge. (APSS No 309 310).

Supply fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end- locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside outside locking with push Pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108

Brick Masonry in CM (1:6) with Bricks with traditional size 23 x 11 x 7 cms 2nd class: Brick Masonry 230 mm thick with Cement Mortar (1:6) prop. (Cement:Sand) using Common Burnt Clay Bricks Non-Modular of traditional size 23 x 11 x 7 cm 2nd Class from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., but excluding seigniorage charges, complete as per drawing and Technical specifications cluase APSS 504 for finished item of work or as directed by Engineer-in Charge for panel walls in Super-Structure, parapet walls.

Providing concrete for plain concrete in open foundations using 40 mm Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 1203 MORD - P.C.C grade M 20 - Nominal mix (1:2:4) (Mechanical Mixer)

Plastering 12 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales other taxes on all materials, complete as per the drawing, technical specification clauses APSS 901, 903 904 for finished item of work or as directed by the Engineer-in-Charge for Brick Wall and RCC exposed faces.

Painting to new iron works with 2 coats of synthetic enamel paint of approved brand and shade over 1 coat of red oxide primer of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 1212 SS 1207 or as directed by the Engineer-In-Charge

Supplying fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm centre ,Bracers with flat iron 40x40x6 mm with 38 mm dia steel pulleys, the top, bottom and side vertical frames of the collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat for the pulleys to guide and fixed with necessary hold fasts, bolts, nuts, rivets, locking arrangements, stoppers, handles, all accessories all fixtures and painted with one coat of approved steel primer etc., complete for finished item of work as per special spn 1105

White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, and including all operational incidental charges and all labour charges etc., but excluding conveyance charges of materials complete, for finished item of work or as directed by the Engineer-in-Charge charges

Supply & Fixing of 160mm dia PVC Pipe 4kg/sqcm

Supply & Fixing of 15’-3” c/c (4.65M) long roof purlins made of 50x50x2.90MM MS tubes including at eves and ridges with 6 mm thick cleats for fixing to trusses including red oxide coating etc., complete and as per the drawing enclosed and as per standard specification for finished item of work.

Supply and fixing of 2.44mt span Verandah truss using 42.40mm OD (M),internal members with 42.40mm OD MS pipe (L) and providing 200x200x10mm thick plates 2 nos,and bolts for fixing the truss l to be fixed to Rcc columns. and 3 nos cleats 150x100 x6mm size to support the purlins and bolts for fixing , including cost and conveyance of all materials, all fabrication charges, redoxide painting, transportation to site errect. (Drawings enclosed) as per standard specification for finished item of work including 20mm dia bolts 8 nos of 0.30M long.

Roofing: - Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove.

Painting to new walls with 2 coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911, SS 912 or as directed by Engineer-In-Charge for external walls

VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including Wooden centering scaffolding, shuttering-Unsupported height upto 3.66mts For BEAMS

Plastering 20 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales other taxes on all materials, complete as per the drawing, technical specification clauses APSS 901, 903 904 for finished item of work or as directed by the Engineer-in-Charge for Brick Wall and RCC exposed faces.

Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixture. All work upto plinth level: PCC (1:4:8) Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 40mm size nominal machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials for finished item of work, but excluding Centering Scaffolding, Shuttering

Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base,as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum size of course aggregate not exceeding 25mm and cement content in the mix to be not less than 350 kg/cum (Ordinary Portland Cement) with minimum water cement ratio of 0.45, mixed in a concrete mixer and appropriate weigh batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including leveling the form work as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and construction joints, applying de bonding strips, primer, bituminous sealant, add mixers as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501.2.2 including cost of all materials, labour, conveyance, hire charges of machinaries etc., complete as per direction of Engineer-In-Charge for CC payment including overheads, contractor profit but excluding seignorage charges and GST For 170mm thick with 3.25m joint spacing

Supply and fixing in position of 0.75x0.90 M size steel Air vents with rolled steel angles having three frames. The outer side frame of 35x35x6 mm M.S. angle welded with 12mm dia plain mild steel rods at 75mm c/c both the ways, Using 25 x 6mm Ms flats for outer frame for fixing of stainless steel Fly proof Mesh, 35x35x6mm frame for Airvent Frame and 25x5mm Ms flat for window shutters and 16 gauge sheet for windows including Cost and Conveyance of all materials and fabrication charges, labour charges.

Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD. - Using naturally occurring gravel

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 400.12 and Technical Specification Clause 406 MORD/MORTH - By Mechanical Works with 1 Km lead Rural Works

Brick Masonry in CM (1:6) with Bricks with traditional size 23 x 11 x 7 cms 2nd class: Brick Masonry 230 mm thick with Cement Mortar (1:6) prop. (Cement:Sand) using Common Burnt Clay Bricks Non-Modular of traditional size 23 x 11 x 7 cm 2nd Class from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., but excluding seigniorage charges, complete as per drawing and Technical specifications cluase APSS 504 for finished item of work or as directed by Engineer-in Charge for panel walls in Super-Structure, parapet walls.

Plastering 12 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales other taxes on all materials, complete as per the drawing, technical specification clauses APSS 901, 903 904 for finished item of work or as directed by the Engineer-in-Charge for Brick Wall and RCC exposed faces.

VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including Steel centering scaffolding, shuttering-Unsupported height upto 3.66mts For COLUMNS

VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including Wooden centering scaffolding, shuttering-Unsupported height upto 3.66mts For BEAMS

VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including Steel centering scaffolding, shuttering-Unsupported height upto 3.66mts For SLABS 150mm thick

Plastering 20 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales other taxes on all materials, complete as per the drawing, technical specification clauses APSS 901, 903 904 for finished item of work or as directed by the Engineer-in-Charge for Brick Wall and RCC exposed faces.