Agricultural Marketing Department Tender

Repairs to structures;Providing 110 mm Dia ISI marked PVC down water take pipes with socket , 2.5mm thick 4kg/sq.cm pressure of ISI marked including cost of necessary PVC Bends, couplers, PVC clips and all other accessories and fixing in position including cost and conveyance of all materials to site, and all operational incidental charges, all labour charges for cutting holes in brick masonry, repairs, fixing at site etc., as per technical specifications clause APSS 1328 for finished item of work or as directed by the Engineer-in-Charge.

Repairs to structures;Supply and Fixing of Premium make CPVC Pipes and Fittings of dia 22.20mm OD Pipe - SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)

Repairs to structures;Supply and Fixing of Premium make CPVC Pipes and Fittings of dia 41.30mm ODPipe - SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)

Repairs to structures;Constructing 904.0 mm (3?0?) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mmincluding plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification andincluding cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental andoperational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

Repairs to structures;Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P' trap

Repairs to structures;Supplying Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Single C.P. Pillar cock

Repairs to structures;Supplying Fixing 12.7 mm N.P bib tap Indian make heavy dutys

Repairs to structures;Brick Masonry in CM (1:6) with Bricks with traditional size 23 x 11 x 7 cms 2nd class: Brick Masonry 230 mm thick with Cement Mortar (1:6) prop. (Cement:Sand) using Common Burnt Clay Bricks Non-Modular of traditional size 23 x 11 x 7 cm 2nd Class from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., but excluding seigniorage charges, complete as per drawing and Technical specifications cluase APSS 504 for finished item of work or as directed by Engineer-in Charge for panel walls in Super-Structure, parapet walls.

Repairs to structures;Plastering 12 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales other taxes on all materials, complete as per the drawing, technical specification clauses APSS 901, 903 904 for finished item of work or as directed by the Engineer-in-Charge for Brick Wall and RCC exposed faces.

Repairs to structures;Raised Pointing to RR Masonry in CM (1:3) including cost and conveyance of all materials like cement, sand water, etc., and including cost of labour for mixing of cement mortar, pointing of joints, etc., complete but excluding seigniorages charges, as per drawing and technical specifications for finished item of work or as directed by the Engineer-in-Charge (APSS No. 906)

Repairs to structures;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308) - in Ordinary Soil-Manual Means-Upto 3M depth

Repairs to structures;Plain Cement concrete (M 20) Nominal Mix using 20mm metal using concrete mixer: PCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials for finished item of work, but excluding Centering Scaffolding, Shuttering

Repairs to structures;Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work or as directed by Engineer-In-Charge for Internal walls

Repairs to structures;Painting:-2) Exterior walls are painted with one coast of primer and 2 coats of exterior emulsion paint .

Repairs to structures;Painting with Synthetic Enamel paints - Two Coats - For Old Wood Work using ready mixed Synthetic Enamel paint in all shades Grade-I including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 1212 or as directed by the Engineer-In-Charge

Repairs to structures;Colour washing two coats of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost conveyance of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work or as directed by the Engineer-In-Charge.

Repairs to structures;White washing two coats with lime of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, and including all operational incidental charges and all labour charges etc., complete, but excluding conveyance charges of materials , for finished item of work or as directed by the Engineer-in-Charge

Repairs to structures;Painting to new iron works with 2 coats of synthetic enamel paint of approved brand and shade over 1 coat of red oxide primer of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 1212 SS 1207 or as directed by the Engineer-In-Charge

Repairs to structures;Flooring with Rough Kadapa slab 50 mm thick and size not less than 0.457 M x0.457 M sstones, set over base coat of cement mortar (1 : 8) 12 mm thick over CC bed already laid or RCC roof slab, including pointing with cement mortar 1:3 duly filling joints neatly, including cost of all materials like Flooring stone, cement, sand, water, etc., complete and including all operational incidental charges, all labour charges for dressing of flooring stones etc., complete, but excluding seigniorage charges, for finished item of work or as directed by the Engineer-in-Charge

Repairs to structures;Boring of piles of 300MM dia with Single under reamed piles to a depth of 3.60mt depth including cost of RCC M-20 grade using 20mm HBG metal including boring charges excluding cost of steel and its fabrication charges including cost and conveyance of all materials, labour charges etc., complete for finished item of work as per standard specifications and as directed by the Engineer - in - charge at site of work etc., complete for finished item of work as per standard specifications and as dir ected by Engineer ? in ? charge at site

Repairs to structures;VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work or as directed by Engineer-in- Charge, but including Centering Scaffolding, Shuttering for FOOTINGS

Repairs to structures;VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work or as directed by Engineer-in- Charge, but including Centering Scaffolding, Shuttering for PLINTH BEAMS

Repairs to structures;VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc.,but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work or as directed by Engineer-in- Charge, but including Steel Centering Scaffolding, Shuttering-Unsupported height upto 3.66mts for COLUMNS

Repairs to structures;VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc.,but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work or as directed by Engineer-in- Charge, but including Steel Centering Scaffolding, Shuttering-Unsupported height upto 3.66mts for LINTELS

Repairs to structures;Plastering 20 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales other taxes on all materials, complete as per the drawing, technical specification clauses APSS 901, 903 904 for finished item of work or as directed by the Engineer-in-Charge for Brick Wall and RCC exposed faces.

Repairs to structures;SF HYSD bars (Lap splicing) - Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different d iameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for rein forcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Repairs to structures;Roofing: - Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove.

Repairs to structures;Supply, Transportation and Fixing of 48 inch (1200mm) Sweep ISI mark Ceiling Fan as per IS 374 - 1979, with double ball bearings, po wer input not more than 50W, air delivery more than 200 cubic meter/min but without Regulator including all standard accessories and all labour charges etc., complete. Makes: Crompton HS Decora / Bajaj Regal Star / Havells ES Plus / Orient summer crown / Usha tech nix decorative

Repairs to structures;ELEC-3.8.16. Supply and fixing of 20W, T8,1200mm length LED retrofit tube light, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete as per IS 10322 (Part 5/ Sec 1)..2012 Makes: Wipro / Phillips / GE-Venture / Crompton / Bajaj /Halonix/Jaquar/HPL b) LED MAKE : PHILIPS LUMILEDS / C REE / NICHIA / OSRAM / SAMSUNG.

Repairs to structures;Supply, Transportation and fixing of 20W LED Street light Luminaire made of pressure diecast aluminium body with powder coated, havi ng protective toughened glass, Supply Input voltage 120 -270 V AC, P.F > 0.90, high power LED's System efficiency >95 lm/W and junct ion temperature < 70°C, with Ingress protection IP65, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge prot ection 4KV, external Surge protection = 5KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., all standard accessories including 1.0 Mtr 25mm dia 'B' Class GI pipe bracket, anti tilting MS flat in cluding connections etc., complete. .a) Luminaire Make : WIPRO / PHILIPS (GREEN LINE )/ Lighting Technologies(Adornis) / SCHREDER (B RIKLA) /GE / VIN (MATRIX) / CROMPTON (HAWK) /BAJAJ (EDGE+) / HALONIX (LUMOS-SUPER) /HAVELLS (ENDURA CITYLINER )b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG

Repairs to structures;Supply of ..............split AC unit with high wall mounted indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 3 core copper flexible cable including cordless remote control etc.1.5 TR 3 Star capable of delivering 18000 BTU / hr and above with operating on re frigerant R-32 / R-410A Makes: Blue Star 3HW18VCTU / Daikin FTE-M or N Sereis / Hitachi / Voltas / Carrier Superia.

Repairs to structures;Supply, transportation, fixing and commissioning of fully automatic 5.00 KVA line voltage stabilizer including cost, conveyance of all materials and all labour charges etc., complete.Makes: V-Guard / Real Guard / Uni Stab / ITL.

Repairs to structures;ELEC-5.9.30. Installation of Split Air Conditioners. ELEC-5.5.28