Acharya NG Ranga Agricultural University Tender

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Masonary work in CM(1:6) prop. (cement: screened sand) in super structure with fly ash cement / lime solid block of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/sq.cm. including cost and conveyance of all materials like cement, sand, bricks, water, etc. to site and excluding sales & other taxes on all materials including all labour charges, mixing cement mortar, construction, scaffolding charges, lift charges, curing etc., complete for finished item of work and as directed by the department

Package of 3 works at RARS, Nandyal, Kurnool Dist.;PCC (1:1 1/2:3) Nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw props and Acro span hire charges for centering & scaffolding cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete including hire charges for centering & scaffolding but excluding cost of steel and its fabrication charges for finished item of work

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Pan tiles: Dismantling Pan tiled or Mangalore tiled roof without roof timbers and clearing away and carefully stacking materials useful for reuse including cost and conveyance of all materials and labour charges etc., complete.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Surki concrete: Dismantling Pan tiled or Mangalore tiled roof without roof timbers and clearing away and carefully stacking materials useful for reuse including cost and conveyance of all materials and labour charges etc., complete.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Through scraping of old plastered surface including cost and conveyance of all materials and labour charges etc., complete.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Providing and grouting 14 mm dia drilling hole by using drilling hammer machine in RCC slab upto 75mm long and the same fiming with 10mm dia rubber tube with a length of 150mm long and fixing it with renderoc plug (powder) and left for 3-4 hours for drying and preparation chemical mixer with cement 150 kgs, SBR latex (liquied) 1.5 ltrs, Nitto bond- bonding agent (liquid) 1.50 litres, cebex -1.00 kg (powder) mixed in cement slurry and this chemical mixture is pumped through the rubber (nozzles) already fixed to the holes by pumping machine into the RCC slab of damaged area and after 12 hours or on the next day removing the rubber tube by covering and filling the hole with renderoc plug (powder) including cost and conveyance of all materials chemicals and labour charges and hire charges of grouting machine, drilling machine and 7" feet height stand and finished item of work. (observed data for - 50 Nos of grouting holes)

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Providing painting to new walls with acrylic emulsion paint 2 coats of approved brand & shade over a coat of primer grade II making total 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, with neat finishing including cost and conveyance of all materials to site and all operational, incidental, labour charges etc., complete for finished item of work. For Externals walls.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Providing painting to new walls with acrylic emulsion paint 2 coats of approved brand & shade over a coat of primer grade I making total 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, with neat finishing including cost and conveyance of all materials to site and all operational, incidental, labour charges etc., complete for finished item of work. For internals walls.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Providing two coats synthetic enamel paint to old wood work and flush shutters with two coats of Grade II VOC(Volatile Organic Compound) approved brand and shade including cost and conveyance of all materials, labour charges etc., complete in all floors as directed by the department.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Leak proof coarse with RCC (1:1½: 3)prop. Using 6mm to 12mm size hard granite machine crushed metal and screened sand of 50mm thick using nominal reinforcement including over plastering with impervious coat required slopes with CM(1:3)prop. Using screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to IS:2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 200ml per one bag of cement, laid over roof slab when it green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cm x 45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, operational, incidental, and labour charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and complete for finished item of work.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Flooring with vitrified tiles of double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600mm x 600 mm and thickness between 8 to 10mm 1st quality conforming to IS: 13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-in-charge, laying tiles using spacers of 2mm thick, set over a base coat of CM(1:8) rop. 12mm thick using screened sand over CC bed already laid or RCC roof slab, including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of CC bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge etc., and complete for finished item of work.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Providing thermo mechanically treated (TMT) (Fe-500 grade as per IS 1786-2008) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG forming grills for reinforcement work as per approved designs and drawings,including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending placing in position, tying excluding sales and other taxes on all materials etc., and complete for finished item of work.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Providing and fixing in true horizontal level 600mm x 600mm using 8mm thick rock strength false ceiling system using hot dipped galvanized steel section exposed surface with pre-coated capping, main tee of size 15 x 32 mm at every 1200 mm c/c maximum and rotary stitched cross tee of size 15 x 32mm at every 600mm c/c and sub-cross tee of size at 1200 mm and wall angle of size 19mm x 19mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0mm thick pre-straightened GI wire laying fine fissured butt edge ceiling tiles of 8mm thick & top phase cover with water proof sheet and for finished of size 600 mm x 600mm including cost and conveyance of all materials and labour charges such as cutting, fixing of standard of frame work exposing roof making complete for finished item of work.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;PCC in (1:3:6) prop. nominal mix (cement: fine aggregate: course aggregate) using screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to IS:2645-2003 manufacturers as approved by Engineer-in-charge at 200ml per one bag of cement, laid over roof slab when is is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cm x 45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, including sales & other taxes on all materials and operational, incidental and labour charges for mixing mortar, laying lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., complete for finished item of work.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;providing impervious coat to exposed RCC roof slab surface with CM(1:3)prop. 20mm thick mixing integral water proofing compound from reputed manufactures at 200 ml per bag of cement laid over roof when it is green including cost and conveyance of all materials like cement, and water proof compound etc., slab surfaces to site, seigniorage, labour charges duly rendering smooth finish and thread lining at regular intervals of 450mm x 450mm c/c,. curing, lift charges etc., complete for finished item of work and as directed by the department.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Repairs and maintenance to the staff quarters (ADR) at RARS, Nandyal, Kurnool Dist.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Earthwork excavation for foundations (Manual means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m and depth of 3m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., and complete for finished item of work and excluding dewatering charges etc., as directed by the department.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Plain cement concrete (1:4:8) prop. nominal mix (cement, fine aggregate, coarse aggregate) for foundations and under flooring beds using coarse aggregate 40mm size hard machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, excluding sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc., and complete for finished item of work.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Filling with stone dust in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Plastering 20mm thick in single coat using screened sand in CM (1:5) prop. in including cost and conveyance of all materials like cement, sand, water etc., to site, excluding sales & other taxes on all materials, and including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and complete for finished item of work.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Double shutter Window with vertical member 4?0? x 4?0? (1219.2mm x 1219.2mm) outer frame section size of 72x50mm shutter frame section size of 48 x 25 mm and mullion section should be of 72x50mm. Providing & Fixing of Openable Windows with Fly-mesh made of pre-painted steel (Base Steel as per IS 513 of 0.58mm thick galvanized as per IS 277 with zinc of 150 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and the section for outer frame of 72 x 55mm, centre mullion of 72 x 50mm, section for fixed glass beading section of 12 x 12 mm and section for shutters of 48 x 25 mm and outer frame &mullion sections with rebate for glazed shutters, fly mesh and a 20 mm provision for guard bars/grills and fly mesh shutter section of 20 x 40 mm and the sections cut to length metre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using rubber gaskets including fixing the windows in the concrete/ masonry wall by means of self expanding screws, including 10mm Square guard bars with 6? (152.4mm) pitch , complete for finished item of work.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Providing and grouting 14 mm dia drilling hole by using drilling hammer machine in RCC slab upto 75mm long and the same fiming with 10mm dia rubber tube with a length of 150mm long and fixing it with renderoc plug (powder) and left for 3-4 hours for drying and preparation chemical mixer with cement 150 kgs, SBR latex (liquied) 1.5 ltrs, Nitto bond- bonding agent (liquid) 1.50 litres, cebex -1.00 kg (powder) mixed in cement slurry and this chemical mixture is pumped through the rubber (nozzles) already fixed to the holes by pumping machine into the RCC slab of damaged area and after 12 hours or on the next day removing the rubber tube by covering and filling the hole with renderoc plug (powder) including cost and conveyance of all materials chemicals and labour charges and hire charges of grouting machine, drilling machine and 7" feet height stand and finished item of work. (observed data for - 50 Nos of grouting holes)

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Through scraping of old plastered surface including cost and conveyance of all materials and labour charges etc., complete.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Providing painting to new walls with acrylic emulsion paint 2 coats of approved brand & shade over a coat of primer grade I making total 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, with neat finishing including cost and conveyance of all materials to site and all operational, incidental, labour charges etc., complete for finished item of work. For internals walls.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Supplying and fixing of RAJSHRI or equivalent SINGLE SIDE PRELAM SOLID PANEL PVC DOOR FRAME (CHOUKHAT) Providing and fixing factory made Pac single side prelam door frame of the size 50mm x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid Pac single side prelam sheet, meter cut at two corners and joined with 2 no?s of 150mm long brackets of 1515mm MS Square tube. The two vertical door profiles are to be reinforced with 19mm x 19mm MS Square tube of 19guage. The door frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using pac fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 no?s for horizontal member etc., complete as per manufacture specification and direction of Engineer-in-charge.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Providing and fixing 30mm thick ?RAJSHRI? or Equivalent BRAND FACTORY MADE SOLID SINGLE SIDE PRELAM PANEL PVC DOOR SHUTTER consisting of frame made out of MS. Tubes of 19gauge thickness and size of 19mm X 19mm for stiles, and 15mm x 15mm for top and bottom rails. The MS. Frame shall have a coat of steel primers of approved make and manufacture. MS. Frame covered with 5mm thick heat moulded ?Rajshri? single side Prelam Pac ?C? channel of size 30mm X 50mm to form stiles 5mm thick x 75mm wide single side prelim pack seeds shall be for the top, bottom and lock rails. Panelling of 5mm thick one side pack sheet to be fitted in the MS frame and sealed to the front (prelam side) stiles and rails (which should have a 5mm 45bent portion as beading) and attached to the back. (white / Ivory) stiles and rails (which should have a 10mm 900 bent portion as beading) using 2 no?s 15mm wide x 5mm thick pack sheet beading inside the 90 bent beading. All stiles, rails and beadings are to be joined to the panel using solvent cement etc., An additional 5mm thick pack strip of 20mm width to be stuck on the interior side of the "C" channel using pack solvent cement adhesive and 10mm (5mm x 2) thick, 20mm wide cross pack sheet to be fitted as gap insert for top and bottom rail etc., complete as directed by the department, manufacture specification and drawing.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Flooring with non-skid red or white ceramic tiles of size 300 x 300mm and thickness between 7-8mm 1st quality confirming to IS:13711, IS:13712, IS:13630 (parts 1 to 15) of any colour and finish in all shades and designs set over a base of CM (1:8) prop. 12mm thick and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C. C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed) and including all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc.,and complete for finished item of work.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Supplying, installing and commissioning approved make European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components and CP short bend and fixed using required size of nails and screws, 12.7mm PVC connections with brass union nuts CP coated and 12.70mm dia. NP bib tap 400 grams Seiko or equivalent complete including cost and conveyance of all materials to site, for finished item of work for all floors.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;S/F of PVC flushing system low level of 10 litres capacity including syphon, all accessories etc., complete for finished item of work.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;S/F of 25.4mm dia, 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges, for finished item of work.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;S/F NP bib taps of size 12.70mm dia of Indian make heavy duty (long body) as approved by the Engineer-in-charge including cost and conveyance of all materials, labour charges, complete for finished item of work in all floors.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;S/F of windows & Top Hung and fixed louvered ventilator made of pre-painted steel (Base steel as per IS 513 of 0.6mm thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be 46mm x 52mm section for shutter should be 46mm x 46mm section for mullion should be 46mm x 70mm, and section for beading should be 33mm x 57mm and section for louvered ventilator should be 33mm x 57mm box section.. The windowsshould be paneled with 5mm thick plain float glass 74mm pin head glass for ventilator with Ethyl propylene Diamine monomer Gasket (EPDM). The sections are to be cut to length mitre joined with corner bracket centre mullions are of high grade aluminum powder coated and nylon receiver. Gaskets made of Ethyl propylene Diamine monomer (EPDM) corner brackets made of CRCA with Zinc phosphate. Mullion caps made of glass filled nylon. The above frame should be fixed to the concrete / masonary wall by means of self expanding screws including 10mm square guard bars with 6" pitch complete for finished item of work for fly mesh shutter (304 grade). Rubber gaskets are provided all around the glass. The above frames should be fixed to the concre / masonary wall by means of self expanding screws including 10mm MS square bars with 5" (125mm) pitch with one number vertical stiffener in each panel using 10mm MS square bars and all Taxes, complete for finished item of work. Ventilators for different sizes: Top Hung 4' x 2 ' (1219.2mm x 609mm) Outer frame section size of 46mm x 52mm, shutter frame section size of 46mm x 46mm and mullion section size of 46mm x 70mm.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;S/F of doors as per approved drawings with MTW of section 100 mm x 75mm with 35mm thick flush door double shutters including cost and conveyance to site of teak wood frame, flush shutters including s/f 6 nos butt hinges of aluminium 125mm long 1No, aluminium aldrop 300mm long 2 nos tower bolts 10mm dia of 250mm long 2 nos 150mm long aluminium door handles 2 Nos heavy duty door stoppers (100mm long), 2 Nos rubber bushes including fixing the fixtures to door witg required number of screws, bolts and nuts including llabour charges for fixing the frame finished item of work including etc., complete for finished item of work.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Providing two coats with synthetic enamel paint Grade I VOC (Volatile Organic Compound) content less than 50 grams/litre to old iron work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete in all floors as directed by the department.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Providing painting to new walls with acrylic emulsion paint 2 coats of approved brand & shade over a coat of primer grade II making total 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, with neat finishing including cost and conveyance of all materials to site and all operational, incidental, labour charges etc., complete for finished item of work. For Externals walls.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Repairs and maintenance of the Boys Hostel and Mess (Boys and Girls) of APT, RARS, Nandyal.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Part A: Boys Hostel

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Providing and fixing factory made polyvinyl chloride (PVC) Door frame of the size 50mm x 47mm with a wall thickness of 5mm, made out of extrude 10mm rigid PVC foam sheet, mitre cut at two corners and joined with 2 nos of 150mm long brackets of 15mm x 15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19mm x 19mm M.S. square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fastners. A minimum of 2 nos of screws to be provided for each vertical member & minimum 2 nos for horizontal member etc., complete as per manufactures specification and direction of Engineer-in-charge for finished item of work.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture.M.S. frame shall be covered with 5mm thick heat moulded PVC ?C? channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail &bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S.frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ?C? Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer?s specification & drawing for finished item of work .

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Supplying, installing and commissioning approved make European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'S' trap, supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components and CP short bend and fixed using required size of nails and screws, 12.7mm PVC connections with brass union nuts CP coated and 12.70mm dia. NP bib tap 400 grams Seiko or equivalent complete including cost and conveyance of all materials to site, for finished item of work for all floors.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Flooring with non-skid red or white ceramic tiles of size 300 x 300mm and thickness between 7-8mm 1st quality confirming to IS:13711, IS:13712, IS:13630 (parts 1 to 15) of any colour and finish in all shades and designs set over a base of CM (1:8) prop. 12mm thick and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C. C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed) and including all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc.,and complete for finished item of work.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Flooring with vitrified tiles of double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600mm x 600 mm and thickness between 8 to 10mm 1st quality conforming to IS: 13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-in-charge, laying tiles using spacers of 2mm thick, set over a base coat of CM(1:8) rop. 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm and jointed neatly with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of CC bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge etc., and t complete for finished item of work.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Providing and grouting 14 mm dia drilling hole by using drilling hammer machine in RCC slab upto 75mm long and the same fiming with 10mm dia rubber tube with a length of 150mm long and fixing it with renderoc plug (powder) and left for 3-4 hours for drying and preparation chemical mixer with cement 150 kgs, SBR latex (liquied) 1.5 ltrs, Nitto bond- bonding agent (liquid) 1.50 litres, cebex -1.00 kg (powder) mixed in cement slurry and this chemical mixture is pumped through the rubber (nozzles) already fixed to the holes by pumping machine into the RCC slab of damaged area and after 12 hours or on the next day removing the rubber tube by covering and filling the hole with renderoc plug (powder) including cost and conveyance of all materials chemicals and labour charges and hire charges of grouting machine, drilling machine and 7" feet height stand and finished item of work.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;S/F of PVC flushing system low level of 10 litres capacity including syphon, all accessories etc., complete for finished item of work.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Supplying & fixing Indian make Flat Back Wash Hand Basin (HSW / Parryware / Nelycer) 1st quality conforming to IS: 2556-part-4:1972 with waste fittings like rubber plug, chain, 32mm nominal size C.P. fitting with parallel pipe thread conforming to IS: 2963-1979and fitted with 15mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko / Senior / Nice / Esso or equivalent complete with standard CI brackets including wooden block: 550mm x 400mm ? Single pillar cock.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Leak proof coarse with RCC (1:1 1/2:3) prop. Using 6mm to 12mm size hard granite machine crushed metal and screened sand of 50mm thick using nominal reinforcement including over plastering with impervious coat required slopes with CM(1:3) prop. Using screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to IS:2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 200ml per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cm x 45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, operational, incidental, and labour charges for mixing lining, curing including rounding off junctions of wall and slab etc., and for finished item of work.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Part B: Mess

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Providing and fixing factory made polyvinyl chloride (PVC) Door frame of the size 50mm x 47mm with a wall thickness of 5mm, made out of extrude 10mm rigid PVC foam sheet, mitre cut at two corners and joined with 2 nos of 150mm long brackets of 15mm x 15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19mm x 19mm M.S. square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fastners. A minimum of 2 nos of screws to be provided for each vertical member & minimum 2 nos for horizontal member etc., complete as per manufactures specification and direction of Engineer-in-charge for finished item of work.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture.M.S. frame shall be covered with 5mm thick heat moulded PVC ?C? channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail &bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S.frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ?C? Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer?s specification & drawing for finished item of work .

Package of 3 works at RARS, Nandyal, Kurnool Dist.;S/F of aluminium anodised single shutter door of size 1.05m x 2.10m as per drawing using standard aluminium anodised section of 47.62mm x 44.45mm x 2.02mm (Jindal-19569) and 85.00 mm x 44.45mm x 2.00mm (Jindal-19560) thick fitted with MDF Board: Interior-both side laminated -9mm thick or equivalent prelaminated particle board for half height and 5.0mm thick plain glass glazing fitted for balance height with suitable aluminium glazing clips including fixing of fixture like aluminium 75mm long hinges 3 Nos, aluminium 150mm long tower bolt 1No, aluminium door handles 100mm long 2 Nos including cost and conveyance of all materials, labour charges for manufacturing fixing in position using wooden blocks and sheet metal screw etc., to complete for finished item of work as approved by Engineer-in-charge.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Providing & Fixing of Openable Windows with Fly-mesh made of pre-painted steel (Base Steel as per IS 513 of 0.58mm thick galvanized as per IS 277 with zinc of 150 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and the section for outer frame of 72 x 55mm, centre mullion of 72 x 50mm, section for fixed glass beading section of 12 x 12 mm and section for shutters of 48 x 25 mm and outer frame & mullion sections with rebate for glazed shutters, fly mesh and a 20 mm provision for guard bars/grills and fly mesh shutter section of 20 x 40 mm and the sections cut to length metre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using rubber gaskets including fixing the windows in the concrete/ masonry wall by means of self expanding screws, including 10mm Square guard bars with 6? (152.4mm) pitch , complete for finished item of work. Double shutter Window with vertical member4'0? x 4'0?(1219.2mm x 1219.2mm) outer frame section size of 72x50mm shutter frame section size of 48 x 25 mm and mullion section should be of 72x50mm.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Providing painting to new walls with acrylic emulsion paint 2 coats of approved brand & shade over a coat of primer grade I making total 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, with neat finishing including cost and conveyance of all materials to site and all operational, incidental, labour charges etc., complete for finished item of work. For internals walls.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Painting to old wood work and flush shutters with two coats of synthetic enamel paint Grade II VOC(Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade including cost and conveyance of all materials, labour charges etc., complete in all floors as directed by the department.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Painting two coats with synthetic enamel paint Grade I VOC (Volatile Organic Compound) content less than 50 grams / litre to old iron work including cost and conveyance of all materials to site, incidental, operational and all labour charges and etc., complete for finished item of work in all floors.

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Part C: Polytechnic

Package of 3 works at RARS, Nandyal, Kurnool Dist.;Flooring with vitrified tiles of double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600mm x 600 mm and thickness between 8 to 10mm 1st quality conforming to IS: 13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-in-charge, laying tiles using spacers of 2mm thick, set over a base coat of CM(1:8) rop. 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm and jointed neatly with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of CC bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge etc., and finished item of work.