Acharya NG Ranga Agricultural University Tender

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Providing and applying prime coat with bitumen emulsion (SSI) Bulk using emulsion pressure distributor on prepared surface of granular base including clearing of road surface and spraying emulsion at the rate of 0.70 kg/sqm using emulsion pressure distributor for finished item of work etc., complete as per MORT&H Specification 502 (5th revision) and as directed by the Epainga-in-charge.

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Providing and applying tack coat with bitumen VG 10 (Bulk) using Bitumen pressure distributor at the rate of 0.20 kgs per sqm on the prepared bituminous surface cleaned with mechanical broom for finished item of work as per MORT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Providing and laying of 50mm thick Bituminous Macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using hard blasted granite crushed aggregates of Grading - II as per table 500-7 of MORT&H specificaion 504 (5th Revision) premixed with bituminous binder of VG-30 grade @3.4 % by weight of total mixture, transported to site, laid over a previously prepared surface with Hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolled as per Clauses 501.6 and 501.7 to achieve the desired compaction for finished item of work as directed by the Engineer-in-Charge including hire and opeational charges all T&P and all other contingent charges necessary, complete and as per MORTH specification No. 504 (5th Revision).

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Providing 25mm thick compound semi-dense bituminous concrete by hot mix plant using hard blasted granite crushed aggregate of Grading-2 as per table 500-15 of specification 508 of MORT & H (4th Revision). Premixed with bituminous binder 60/70 grade @5% of mix and filler, transportation the hot mix to work site, laying with mechanical paver finisher to the reuired grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desire compaction as per MORT H specification 508 (4th Revision) complete for finished item of work in all repects as directed by Engineer- in-charge (pavement will be made based on levels for finished item of work)

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Name of Work: Laying of Balance BT Road items between Field Nos.2 & 2(a) at RARS, Lam, Guntur.

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Providing Vibrated Cement Concrete (1:2:4) using 20mm size graded HBG crushed stone aggregate and fine aggregate conforming to table 1000-2 of MORT&H including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc.. including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MORT&H specification 1500,1700, 2200 (5th Revision) and as directed by the Engineer-in-Charge for Body walls.

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Providing HYSD bars (Fe-500) of different diameters, wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement including cutting, bending, binding rods, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and operational charges etc., and including over lapping welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings, as per the directions of the Engineer-in-Charge and as per MoRT&H specification 1600 & 2100 (5th revision) and as per I.S.1786 of 1985 for foundations of RCC items

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Providing and applying prime coat with bitumen emulsion (SSI) Bulk using emulsion pressure distributor on prepared surface of granular base including clearing of road surface and spraying emulsion at the rate of 0.70 kg/sqm using emulsion pressure distributor for finished item of work etc., complete as per MORT&H Specification 502 (5th revision) and as directed by the Epainga-in-charge.

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Providing and applying tack coat with bitumen VG 10 (Bulk) using Bitumen pressure distributor at the rate of 0.20 kgs per sqm on the prepared bituminous surface cleaned with mechanical broom for finished item of work as per MORT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Providing and laying of 50mm thick Bituminous Macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using hard blasted granite crushed aggregates of Grading - II as per table 500-7 of MORT&H specificaion 504 (5th Revision) premixed with bituminous binder of VG-30 grade @3.4 % by weight of total mixture, transported to site, laid over a previously prepared surface with Hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolled as per Clauses 501.6 and 501.7 to achieve the desired compaction for finished item of work as directed by the Engineer-in-Charge including hire and opeational charges all T&P and all other contingent charges necessary, complete and as per MORTH specification No. 504 (5th Revision).

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Providing 25mm thick compound semi-dense bituminous concrete by hot mix plant using hard blasted granite crushed aggregate of Grading-2 as per table 500-15 of specification 508 of MORT & H (4th Revision). Premixed with bituminous binder 60/70 grade @5% of mix and filler, transportation the hot mix to work site, laying with mechanical paver finisher to the reuired grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desire compaction as per MORT H specification 508 (4th Revision) complete for finished item of work in all repects as directed by Engineer- in-charge (pavement will be made based on levels for finished item of work)

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Name of Work: Laying of Balance BT Road items between Field Nos.2&3 at RARS, Lam, Guntur.

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Providing Vibrated Cement Concrete (1:2:4) using 20mm size graded HBG crushed stone aggregate and fine aggregate conforming to table 1000-2 of MORT&H including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc.. including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MORT&H specification 1500,1700, 2200 (5th Revision) and as directed by the Engineer-in-Charge for Body walls.

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Providing HYSD bars (Fe-500) of different diameters, wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement including cutting, bending, binding rods, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and operational charges etc., and including over lapping welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings, as per the directions of the Engineer-in-Charge and as per MoRT&H specification 1600 & 2100 (5th revision) and as per I.S.1786 of 1985 for foundations of RCC items

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Providing and applying prime coat with bitumen emulsion (SSI) Bulk using emulsion pressure distributor on prepared surface of granular base including clearing of road surface and spraying emulsion at the rate of 0.70 kg/sqm using emulsion pressure distributor for finished item of work etc., complete as per MORT&H Specification 502 (5th revision) and as directed by the Epainga-in-charge.

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Providing and applying tack coat with bitumen VG 10 (Bulk) using Bitumen pressure distributor at the rate of 0.20 kgs per sqm on the prepared bituminous surface cleaned with mechanical broom for finished item of work as per MORT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Providing and laying of 50mm thick Bituminous Macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using hard blasted granite crushed aggregates of Grading - II as per table 500-7 of MORT&H specificaion 504 (5th Revision) premixed with bituminous binder of VG-30 grade @3.4 % by weight of total mixture, transported to site, laid over a previously prepared surface with Hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolled as per Clauses 501.6 and 501.7 to achieve the desired compaction for finished item of work as directed by the Engineer-in-Charge including hire and opeational charges all T&P and all other contingent charges necessary, complete and as per MORTH specification No. 504 (5th Revision).

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Providing 25mm thick compound semi-dense bituminous concrete by hot mix plant using hard blasted granite crushed aggregate of Grading-2 as per table 500-15 of specification 508 of MORT & H (4th Revision). Premixed with bituminous binder 60/70 grade @5% of mix and filler, transportation the hot mix to work site, laying with mechanical paver finisher to the reuired grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desire compaction as per MORT H specification 508 (4th Revision) complete for finished item of work in all repects as directed by Engineer- in-charge (pavement will be made based on levels for finished item of work)

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Name of Work: Laying of Balance BT Road items between Field Nos.5&6 at RARS, Lam, Guntur.

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Providing Vibrated Cement Concrete (1:2:4) using 20mm size graded HBG crushed stone aggregate and fine aggregate conforming to table 1000-2 of MORT&H including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc.. including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MORT&H specification 1500,1700, 2200 (5th Revision) and as directed by the Engineer-in-Charge for Body walls.

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Providing HYSD bars (Fe-500) of different diameters, wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement including cutting, bending, binding rods, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and operational charges etc., and including over lapping welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings, as per the directions of the Engineer-in-Charge and as per MoRT&H specification 1600 & 2100 (5th revision) and as per I.S.1786 of 1985 for foundations of RCC items

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Providing and applying prime coat with bitumen emulsion (SSI) Bulk using emulsion pressure distributor on prepared surface of granular base including clearing of road surface and spraying emulsion at the rate of 0.70 kg/sqm using emulsion pressure distributor for finished item of work etc., complete as per MORT&H Specification 502 (5th revision) and as directed by the Epainga-in-charge.

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Providing and applying tack coat with bitumen VG 10 (Bulk) using Bitumen pressure distributor at the rate of 0.20 kgs per sqm on the prepared bituminous surface cleaned with mechanical broom for finished item of work as per MORT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Providing and laying of 50mm thick Bituminous Macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using hard blasted granite crushed aggregates of Grading - II as per table 500-7 of MORT&H specificaion 504 (5th Revision) premixed with bituminous binder of VG-30 grade @3.4 % by weight of total mixture, transported to site, laid over a previously prepared surface with Hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolled as per Clauses 501.6 and 501.7 to achieve the desired compaction for finished item of work as directed by the Engineer-in-Charge including hire and opeational charges all T&P and all other contingent charges necessary, complete and as per MORTH specification No. 504 (5th Revision).

Laying of Balance BT road items between Field Nos 6/7 , F17/16 , 2/2(a), 2/3,5/6 at RARS, Lam, Gunt;Providing 25mm thick compound semi-dense bituminous concrete by hot mix plant using hard blasted granite crushed aggregate of Grading-2 as per table 500-15 of specification 508 of MORT & H (4th Revision). Premixed with bituminous binder 60/70 grade @5% of mix and filler, transportation the hot mix to work site, laying with mechanical paver finisher to the reuired grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desire compaction as per MORT H specification 508 (4th Revision) complete for finished item of work in all repects as directed by Engineer- in-charge (pavement will be made based on levels for finished item of work)