Get tender documents at just ₹200 per tenderKnow More
Search made simple for latest tendersNo hidden charges. No keyword restrictionsExplore Our Plansor Pay Per Tender

Bid Number: GEM/2019/B/192563 Dated: 26-02-2019 Bid Document Bid Details Bid End Date/Time 08-03-2019 15:00:00 Bid Life Cycle (From Publish Date) 90 (Days) Bid Offer Validity (From End Date) 45 (Days) Ministry/State Name Ministry Of Shipping Department Name Na Organisation Name Andaman Lakshadweep Harbour Works (alhw) Office Name Port Blair Total Quantity 44 Item Category LED Luminaire (Recessed Luminaire) , LED Luminaire (Recessed Luminaire) , LED Luminaire (Recessed Luminaire) Experience with Government Required 1 Year (s) MSE Exemption For Years Of Experience And Turnover Yes Startup Exemption For Years Of Experience And Turnover Yes Document required from seller Experience with Government LED Luminaire (Recessed Luminaire) ( 20 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) STANDARDS Conformity to Indian Standard IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 for Recess type * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * DC or AC supplied electronic control gear Yes * 1 / 15 for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Luminaire Class (as per Cl. 2.1 Section 2 of IS: 10322 (Part-1) Class I * Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 * Rating of Recess type LED Luminaire/System Wattage/Rated Power 36W * Light Intensity(System Lumens) 80 Lm/Watt for 3000 deg K, 90 Lm/Watt for 4000 deg K, 100 Lm/Watt for 6000 deg K Yes * Color temeprature (+/- 500 K) 3000 deg K * Type of fixture (in feet) 2x2(30W to 48W) 1x1 (for 3W to 16W), 1x2 (3W to 16W), 1x1 (for 18W to 28W), 1x2 (18W to 28W), 1x4 (30W to 48W), 2x2(30W to 48W) CONSTRUCTIONAL Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest (Minimum) IP20 * Mounting type Recess type * Diffuser material Acrylic * The luminaire body must be corrosion resistant epoxy powder coated / anadozing Yes * All fastners must be of nickel/chrome plated Yes * Number of electronic control gear (power supplies) 1 * Light Source SMD LED Chip as per LM 80/IS16106 * Warranty for free replacement 2 Years * ELECTRICAL EFFICIENCY Operating Voltage and frequency range 140V to 280 V at 50 Hz AC * 2 / 15 MANAGEMENT Rated voltage 230 V AC 50 Hz * AC Power Factor ≥ 0.90 * Driver Efficiency ≥85 * Total Harmonics Distortion ( ≤ 20% (for upto 20W) (</=10% (for above 20W) Yes * The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl 8 of IS:16104:2012 lates) Yes * OPTICAL MANAGEMENT LED chip Efficacy (≥130 Lm/Watt for 6000 deg K, >/=120 Lm/Watt for 4000 deg K, >/=110 Lm/Watt for 3000 deg K) Yes Yes, Yes, with higher efficacy >/=140 Lm/Watt Working life for LED : (Minimum 50,000 burning hours as per LM-80 report) Yes * Colour Rendering Index(CRI) ≥80 * Beam Angle ≥120 * Reflector type Diffuser * THERMAL MANAGEMENT Fixture / Luminaire should be die-cast aluminium /CRCA/Extruded aluminium Yes * Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes * Junction temperature / soldering temperature < 85 deg C * Operating temperature range -10 deg. C to +50 deg. C * Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * High voltage test (1.5 KV for one minute between supply Yes * 3 / 15 terminals and body of the unit) Insulation resistance between earth and current carrying part >100 M ohm * The luminaire shall be protected against surges and transients of >/=2.5 KV Yes * MARKING Manufactures Name and brand shall available on the body of the Luminaire Engraved/Embssed * Each LED liminaire shall have the manufacturer’s name, model number, serial number, date of manufacture (month- year), and lot number as identification mark inside each unit and the outside of each packaging box Yes * The operation char

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.