Food Corporation Of India Tender
... More
The FCI has issued a formal invitation for competitive bids for the Food Corporation Of India project, for Sitc Of 30 Kva Silent Type Diesel Generator Set Cpcb Iv Plus Norms With Amf Panel Including Providing Earthing Foundation Base And Roofing With Profile Sheet For Dg Set At Fsd Portblair Under Do Portblair For The Fy 2024254thcall in South Andaman, Andaman & Nicobar Islands, with an estimated contract value of Rs. 11,31,767. The bid opening date for this tender is 17-05-2025 and the last date for bid submission is 27-05-2025. Interested bidders for Food Corporation Of India tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Food Corporation Of India - FCI Tender
Electrical Generators And Transformers
Electrical and Electronics
Eprocure
Opening Date17 May 2025
Closing Date27 May 2025
Tender Amount₹ 11,31,767
Costs
EMD
₹ 22,640Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Sitc Of 30 Kva Silent Type Diesel Generator Set Cpcb Iv Plus Norms With Amf Panel Including Providing Earthing Foundation Base And Roofing With Profile Sheet For Dg Set At Fsd Portblair Under Do Portblair For The Fy 2024254thcall
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_FCI_860477_1Bid Award Id
ViewTender No
04/2025-26 portblair DGset 4th callTender Authority
Food Corporation Of India ViewPurchaser Address
-Website
http://http://fci.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
10
1162
11620
... More
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
10
972
9720
... More
Providing and fixing 25 mm X 5 mm GI strip on surface or in recess for connections etc. as required.
10
244
2440
... More
Supplying and laying 25 mm X 5 mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
10
144
1440
... More
Supplying of PVC insulated, PVC sheathed / XLPE aluminium conductor armoured under ground power cable of 1.1 KV grade conforming to IS 1554 part-I/7098(part-I) 1998 with up to date amendments of the following sizes. (a) 4 x 25 sq mm
70
694
48580
... More
Supplying of PVC insulated, PVC sheathed / XLPE Copper conductor armoured under ground power cable of 1.1 KV grade conforming to IS 1554 part-I/7098(part-I) 1998 with up to date amendments of the following sizes. (a) 6 x 2.5 sq mm
30
844
25320
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
(a) 4 x 25 sq mm (28mm)
6
315
1890
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required (OD-63 mm & ID-51 mm nominal)
50
247
12350
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required
Upto 35 Sq.mm
80
37
2960
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
(a) Up to 35 sq. mm
20
55
1100
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
(a) All kinds of soil
2.388
177
423.87
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
0.2985
2123
633.9393749999999
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)
3.2835
7780
25546.61505
... More
(b) 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
0.054
6812
367.848
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
0.8415
8583
7222.9311
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level (for DG Set Foundation)
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.
49.36
107
5323.476
... More
Centering and shuttering including strutting, propping etc. and removal of form work for :
Foundations, footings, bases for columns
5.97
392
2341.1355
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
275.762
117
32360.6707
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
20.48
738
15127.552
... More
CEMENT PLASTER (IN FINE SAND)12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
9.67
333
3223.4945000000002
... More
Applying priming coats withprimer of approved brand and manufacture, having low VOC(volatile organic compound) content :
With water thinnable cement primer on wall surface having VOC less tahn 50 grams/litre
9.67
73
715.0965
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
31.2
226
7059
... More
Supply & installation of Safety Items with First Aid Kit, short Treatment Chart, DCP Type Fire Extinguisher of 2Kgs., Rubber mat , Fire Bucket of 2nos. With Stand etc as reqd
1
10794
10794
... More
Supplying, Installation, Testing, Commissioning of On Load Changeover Switch of 4 pole 100 A 415 V rating with Enclosure box fabricated using CRCA draw quality sheet steel of 16 SWG thickness, Powder coated paint finish Body, Foamed-in PU gasket for superior and long-lasting ingress protection (IP 65/IP 66 rating) with gland plate provided at the top/bottom along with other required accesories on wall surface or existing panel board including making connections, terminating incoming and out going cables etc as required.
1
12788
12788
... More
Providing and fixing Sheet Steel Enclosure Box including accessories suitable for 100 A,30KA,FPMCCB with IP 30 Protection at site of work etc., as required
1
1653
1653
... More
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc as required
-
-
-
... More
100A,30KA FPMCCB
1
7723
7723
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements