Directorate General Of Lighthouses And Lightships Tender
... More
The DGLL has issued a formal invitation for competitive bids for the Directorate General Of Lighthouses And Lightships project, for Re-construction Of Staff Quarters At Junglighat. in South Andaman, Andaman & Nicobar Islands, with an estimated contract value of Rs. 29,47,41,000. The bid opening date for this tender is 16-05-2025 and the last date for bid submission is 23-06-2025. Interested bidders for Directorate General Of Lighthouses And Lightships tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Directorate General Of Lighthouses And Lightships - DGLL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date16 May 2025
Closing Date23 Jun 2025
Tender Amount₹ 29,47,41,000
Costs
EMD
₹ 58,95,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_DGLL_860094_1Tender No
CM-PB-02040/1/2022-CM-PBTender Authority
Directorate General Of Lighthouses And Lightships ViewPurchaser Address
-Website
http://http://www.dgll.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 15km also including levelling ,ramming and watering of the earth in layers for plinth of foundations of buildings, raising of Ground levels of Plot, including cost of transportation ,all labours charges, cost of all materials ,dewatering,royality, levelling, consolidation, Minor Tools & Plants etc. complete as directed by Engineer-in charge.
3819
1575
6014925
... More
Supplying and filling in plinth with coarse sand derived from natural sources under floors, including watering, ramming, consolidating and dressing complete, including cost of transport , labours, cost of all materials, minor tools & plants etc. complete as directed by Engineer-in charge.
160
2654
424750.4
... More
Surface dressing of the ground in all kinds of soil including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m, including cost of transportation ,all labours charges, cost of all materials ,dewatering, levelling, consolidation, Minor Tools & Plants etc. complete as directed by Engineer-in charge.
-
-
-
... More
All kinds of soil
2000
42
85380
... More
Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials, including cost of transportation ,all labours charges, cost of all materials ,dewatering, leveling, consolidation, Minor Tools & Plants etc. complete as directed by Engineer-incharge.
-
-
-
... More
All kinds of soil
64
158
10144
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared, including cost of transportation ,all labours charges, cost of all materials ,dewatering, levelling, consolidation, Minor Tools & Plants etc. complete as directed by Engineer-incharge.
2000
22
44000
... More
1:3:6 (1 Cement : 3 coarse sand derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) including cost of labours, tools& plants ,materials, mixing, transportation placing etc. complete as directed by Engineer-incharge.
248
8973
2225413.12
... More
1:4:8 (1 Cement : 4 coarse sand derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), including cost of labours, tools& plants ,materials, mixing, transportation placing etc. complete Engineer-in-charge.
164
8515
1396460
... More
1:2:4 (1 cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources), including cost of labours, tools& plants ,materials, mixing, transportation placing etc. complete Engineer-in-charge.Engineer-incharge.
364
9848
3584719.32
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources), including cost of labours, tools& plants ,materials, mixing, transportation placing etc. complete Engineer-in-charge. Engineer-in charge.
75
513
38516.99999999999
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including cost of labours, tools& plants ,materials, mixing, transportation placing etc. complete Engineer-in-charge..
372
936
348426.36
... More
Centering and shuttering including strutting, propping etc. and removal of form work for Plain Cement Concrete works in Foundations, footings, bases for columns, etc. , including cost of labours, tools& plants ,materials, , transportation, handling etc. complete Engineer-in-charge..as directed by Engineer-in charge.
393
490
192644.67
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from main land natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, scaffolding, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum.
-
-
-
... More
All works upto plinth level - Reinforced Cement Concrete of M30 grade with minimum cement content of 350 kg /cum
837
12069
10102280.309999999
... More
All works above plinth level up to Floor Five - Reinforced Cement Concrete of M30 grade with minimum cement content of 350 kg /cum
1251
12514
15655251.690000001
... More
Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge. including cost of transport, labours,tools & plants, materials etc.. as directed by Engineer-incharge.
455
3852
1752860.2
... More
Providing and fixing at or near ground level precast cement concrete 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. including cost of transport, labours,tools materials etc.. as directed by Engineer-incharge.
44
10908
479976.63999999996
... More
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more as Steel reinforcement for R.C.C. work in structures including straightening, cutting, bending, placing in position and binding all complete upto all height, including cost of transport, scaffolding, labours etc. as directed by Engineer-in charge.
278226
134
37507647.06
... More
Providing Centering and shuttering including strutting, propping etc. and removal of form for reinforced cement concrete works in structures including cost of transport, scaffolding, labours, tools materials etc.. as directed by Engineer-in-charge.
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
2170
490
1063712.3
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
1998
1053
2104153.74
... More
Suspended floors, roofs, landings, balconies and access platform
3955
1159
4584082.3
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
2493
920
2294806.5
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
3077
1201
3697415.5100000002
... More
Stairs, (excluding landings) except spiral-staircases
75
956
71714.25
... More
Providing and fixing up to floor five level precast cement concrete solid block of 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)., including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering, scaffolding complete :
-
-
-
... More
Works up to Plinth level - 200 mm thick CC solid blocks
105
22361
2347963.8000000003
... More
All works above plinth level up to Floor Five - 200 mm thick CC solid blocks
503
22361
11247864.680000002
... More
All works above plinth level up to Floor Five - 100 mm thick CC solid blocks
162
22361
3622572.72
... More
Steel work welded in built up sections/ framed work In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. Including cost of transport, materials, labours etc complete. as directed by Engineer-in charge.
5787
215
1248545.25
... More
Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M35, in accordance with IS 456 (Latest Edition) using coarse aggregate from mainland quarry, mainland river sand confirming to Zone-III and 53 grade Ordinary Portland cement confirming to IS 12269, adding silica fume and approved plasticizer as per design mix, of 500 mm diameter and length below pile cap, to carry a safe working load not less than 22 meter, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap, including cost of concreting pile, pile cap of size as per drawings of grade M35 etc. by Crawler mounted, telescopic boom hydraulic pilling Rig suitable equipment all complete, including the cost of removal of excavated earth with all its lifts and leads, shoe, length of pile to be embedded in the pile cap, shifting and position of piling plant, cranes, stagings, stabilization of bore with bentonite slurry, welding charges, struts, dewatering, all labour charges, transportation cost of all materials to work site, hire charges and running charges of batching plant,vibrator,consumables, cost of minor tools and plants, taxes etc complete. (The design mix shall be provided by the contractor from the approved laboratory of Govt. of India). Note: Truck Mounted rotary / TMR / Tube well boring machine shall not be used.
6512
5875
38258000
... More
Fabrication, Supply of ribbed tor steel reinforcement with a minimum yield strength of 500N/mm2 and minimum elongation of 16% or equivalent confirming to IS 1786 for Fabrication and fixing of reinforcement cages as per drawing for bored cast-in-situ piles 500 mm dia as per approved drawing/as per the direction of Engineer-in-Charge, including cost of fabrication, fixing dowels, shear ties, straightening, cutting, bending, binding, tying, lapping and welding in position, lowering of reinforcement cage in position, wherever necessary with black 18 SWG annealed binding wire, all labour charges, transportation charges of all materials to Work Site, cost of binding wires, all T&P required for the work and minor tools including cost of materials labours, transportation charges etc. complete
212200
134
28606682
... More
Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge. Note: 1. Initial and Routine Load Test shall not be carried out by Dynamic method of testing. Note: 2. Testing agency shall submit the design of loading platform for the approval of Engineer-in-charge. Group of two or more piles Safe capacity
-
-
-
... More
Initial test (Test Load 2.5 times the Safe capacity) including the installation of piles loading platform by Kentledge/Anchor piles etc complete
5
88025
440128.15
... More
Routine test (Test Load 1.5 times the Safe capacity)
5
50681
253407.2
... More
Lateral load testing of single pile in accordance with IS Code of practice IS : 2911 (Part IV) for determining safe allowable lateral load on pile :Upto 50 tonne capacity pile
5
24540
122702.5
... More
Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS 14893 including surface preparation of pile top by removing soil, mud, dust & chipping lean concrete lumps etc. and use of computerised equipment and high skill trained personal for conducting the test & submission of results, all complete as per direction of Engineer-in-charge
59
1441
85048.5
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
1530
273
418653.89999999997
... More
Supplying, staking, Laying, spreading and compacting stone aggregate of 63 mm to 45 mm to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .
192
3112
597672.96
... More
Construction of granular sub-base by providing with material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.
115
3480
400200
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of 60 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
2228
1307
2912129.6799999997
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipment’s, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level
-
-
-
... More
All types of soil
105
884
92892.45000000001
... More
Rocky strata including Boulders
15
2118
31783.2
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of 100 mm nominal dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
105
840
88239.9
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs of 100 mm nominal dia, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
15
858
12872.85
... More
Supplying, filling, spreading & levelling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
7
1887
13210.75
... More
Supplying, filling, spreading & levelling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
7
1922
13459.67
... More
Supplying, filling, spreading & levelling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in- charge.
7
1922
13459.67
... More
Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
3
2530
7591.89
... More
Providing and fixing 100 mm dia threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of:
1
280
280.13
... More
Providing and fixing M.S. clamp of 100 mm dia to the top of casing/ housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.
1
2389
2389.25
... More
Providing and fixing Bail plug/ Bottom plug of 100 mm dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).
1
331
331.38
... More
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
554
1320
731385.26
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite stone slab for kitchen platforms, vanity counters, window sills, facias and similar locations of area of slab over 0.50 Sqm, approved shade, colour black, Cherry / Ruby red and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
461
6420
2959735.25
... More
Providing and fixing 1st quality ceramic glazed wall tiles conforming toIS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.
2173
1584
3444074.62
... More
Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
29
1752
50822.5
... More
Providing and laying Double charge vitrified tiles polished finish in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily.
-
-
-
... More
Size of Tile 600 x 600 mm
2720
1817
4942403.2
... More
Size of Tile 800 x 800 mm
353
1918
677251.6799999999
... More
Providing and laying Glazed Vitrified tiles Antiskid finish in floor in Size of Tile 600 x 600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily.
285
1831
521852.1
... More
Providing and laying double charged Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments
etc. complete.
-
-
-
... More
Size of Tile 600 x 600 mm
751.25
2028
1524143.5125
... More
Size of Tile 800 x 800 mm
88.25
2448
216041.29499999998
... More
Plastering to various surfaces of structures at all heights with as specified including making rough the smooth surface etc., including of all projections etc., including cost of supply of all materials, labours, tools and plants, Scaffolding, Curing, transportation charges and all other charges etc., complete.
-
-
-
... More
12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand) for interior surfaces of the building
11448
446
5113707.12
... More
15 mm cement plaster on rough side / exterior side of the building of mix 1:6 (1 cement: 6 coarse sand)
4785
494
2364699.15
... More
6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand) on ceilings
3740
375
1404594.4
... More
Neat cement punning on various surfaces as per the direction of Engineer in Charge
476
84
40341
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered interior and exterior wall surface of the Buildings to prepare the surface even and smooth complete. including of all projections etc., including cost of supply of all materials, labours, tools and plants, Scaffolding and all other charges etc., complete.
19973
195
3895933.38
... More
Providing and applying 2 or more coats of High performance premium acrylic emulsion of Latex based Elastomers with Anti Carbonation Properties, Water resistant, Dirt resistant, Anti Fungal, Anti Algal, Sun Reflective paint powered by PU (Polyurethane) Technology and equipped with Crack Proof Technology having 10 years of performance - Weather shield Elastomeric PU or equivalent of approved shade, over a coat of special grade alkali resistant primer - Weather shield Sealer E1000 or equivalent, complete as per manufacturers specifications, drawing completed on exterior wall surface of building at all height Including cost of transport, labours, scaffolding, tools materials etc. as directed by the Engineer-in-charge.
4785
500
2392500
... More
Finishing the interior surfaces of the wall with Deluxe Multi surface paint system Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm as per manufacturers specifications, Including cost of transport, labours, scaffolding, tools materials etc. as directed by the Engineer-in-charge.
15188
242
3677470.44
... More
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10C sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture
397
220
87439.25
... More
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture, at all height Including cost of transport, labours, scaffolding, tools materials etc. as directed by the Engineer-in-charge.
300
213
64014
... More
French spirit polishing of approved brand and manufacture two or more coats on new works including a coat of wood filler, at all height Including cost of transport, labours, scaffolding, tools materials etc. as directed by the Engineer-in-charge.
100
557
55780.99999999999
... More
Providing and laying in situ seven course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over sloped roof after surface preparation consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with decorative Portuguese type clay tile for slop roof of size 8"X6" and in case of corner then use 6"X4" Mini Ridge on sloped roofs jointed with cement mortar 1:3 (1 cement : 3 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) and finished neat complete
1385
3069
4251437.55
... More
Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
-
-
-
... More
Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm)
177
15620
2764750.62
... More
Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
-
-
-
... More
Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)
42
14899
625792.02
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
-
-
-
... More
Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension (Area of window
135
14899
2011474.3499999999
... More
above 1.75 sqm upto 2.50 sqm).
260
14899
3873950.6
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).
-
-
-
... More
Frame size 50 x 125 mm
615
1344
826947.4500000001
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
-
-
-
... More
39 mm thick
260
6269
1629989.4
... More
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :
-
-
-
... More
125x64x2.50 mm
360
162
58431.6
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
-
-
-
... More
250x16 mm
120
379
45487.2
... More
Providing and fixing powder coated aluminium tower bolts with necessary screws etc. complete
-
-
-
... More
150x10 mm
120
103
12382.8
... More
Providing and fixing powder coated aluminium handle with necessary screws etc. complete :
-
-
-
... More
125mm
120
82
9937.2
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
-
-
-
... More
Twin rubber stopper
120
90
10852.8
... More
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
117
1247
146008.98
... More
Providing and fixing bright finished brass door latch with necessary screws
-
-
-
... More
250x16x5 mm
117
385
45045
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete
-
-
-
... More
Fixed to steel windows by welding
4860
273
1331056.8
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
590
965
569645
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
... More
Powder coated aluminum (minimum thickness of powder coating 50 micron)
100
793
79306
... More
Providing design, Supply, Fabrication and installation of Glass Railing Systems (H-1200mm) as per approved drawings complete using SS 304 Top handrail 65mm dia, anchor bracket, alum. U Channel/mechanism etc. including Cover profile & Section Grip mentioned below with all necessary hardware along with 12mm thick toughened glass as per specification etc. including providing and fixing arrangement and fixing of all accessories as per manufactures standard, including cost of transport, labours, tools materials etc.. as directed by Engineer-in charge.
80
11250
900000
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,
(i) Single socketed pipes.
-
-
-
... More
110 mm diameter
500
471
235875
... More
Providing & fixing on wall face unplasticised - PVC molded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.
-
-
-
... More
110mm Coupler
50
170
8509.5
... More
110 mm Single pushfit Coupler
50
159
7975
... More
Single tee with door of 110x110x110 mm
50
292
14634.5
... More
Single tee without door of110x110x110 mm
50
276
13834.5
... More
87.5° Bend of 110 mm
100
187
18794
... More
Shoe (Plain) of 110 mm
100
164
16481
... More
Providing & fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work & fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
... More
110 mm
100
464
46413
... More
Disposal of moorum/building rubbish/ malba/muck similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.
1279
617
789948.77
... More
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.
-
-
-
... More
Beyond 30 cm girth upto and including 60 cm girth
15
665
9981.6
... More
Beyond 60 cm girth upto and including 120 cm girth
15
2966
44503.200000000004
... More
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
66
35075
2314950
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
66
16661
1099642.5
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
... More
Kitchen sink without drain board
610x460 mm bowl depth 200 mm
25
6176
154400
... More
Providing and fixing SWIVEL MIRROR 630 X 445MM RECTANGULAR SHAPE(Jaqure model no- AKP-CHR-35795 ) complete with 6 mm thick hard board.
ground fixed to wooden cleats with C.P. brass screws and washers complete.
66
4953
326947.5
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
66
1415
93390
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour..
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms
66
1961
129442.5
... More
Providing and fixing toilet paper holder. C.P. brass
66
1004
66305.58
... More
Providing and fixing soil, waste and vent pipes 100 mm dia
Sand cast iron S&S pipe as per IS: 1729
300
3750
1125000
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge
91
2573
234211.25
... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.
66
66
4392.96
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc
-
-
-
... More
15 mm OD
200
622
124450
... More
20 mm OD
300
672
201600
... More
25 mm OD
100
784
78406
... More
32 mm OD
100
924
92413
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in
pipes having thermal stability for hot and cold water supply including all CPVC plain and bruss threaded fitting including clamps at 1.00 m spacing including joining of pipes and fitting with one step CPVC solvent cement and testing of joints
complete at all levels as directed and specified. (Note: Ball valve and union will be charged extra and does not comes under
Accessories)
In internal wall - exposed on wall
-
-
-
... More
15 mm OD
300
319
95961
... More
20 mm OD
700
406
284459
... More
25 mm OD
200
510
102136
... More
32 mm OD
100
626
62617.99999999999
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge
-
-
-
... More
25 mm nominal dia Pipes
200
444
88850
... More
32 mm nominal dia Pipes
100
548
54825
... More
40 mm nominal dia Pipes
100
703
70381
... More
50 mm nominal dia Pipes
100
992
99281
... More
65 mm nominal dia Pipes
100
2093
209300
... More
Providing and fixing OVERHEAD SHOWER 120MM DIA ROUND SHPAE MULTIFLOW WITH CASCADE EFFECT (ABS BODY CHROME PLATED WITH GRAY FACE PLATE) (Jaqure model no- OH-SCHR-1779 )-120 mm diameter
66
3970
262020
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore
150
674
101239.49999999999
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
-
-
-
... More
15 mm nominal bore
20
508
10171.2
... More
20 mm nominal bore
20
578
11562.6
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes
2000
13
27500
... More
Providing and fixing bib cock of approved quality conforming to IS:8931 :
157
2896
454711.25
... More
Providing and fixing 2 way bib cock of approved quality conforming to IS:8931 :
66
3447
227535
... More
Providing and fixing C.P. brass pillar cock (concealed) of standard design and of approved make conforming to IS:8931.
157
4928
773813.75
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931.-
15 mm nominal bore
132
717
94758.84
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931
15 mm nominal bore
350
838
293321
... More
Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete 150 mm diameter
350
739
258737.5
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) alround S.W. pipes including bed concrete as per standard design:
150 mm diameter S.W, pipe
350
869
304412.5
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150x100 mm size P type
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
20
3417
68355
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 sand:cement: 2 fine ) including testing of joints etc. complete
300 mm dia. R.C.C. pipe
200
1242
248576.00000000003
... More
Supplying and fixing C.I. cover without frame for manholes 560 mm diameter C.I. cover (Heavy duty) the weight of the 560 mm diameter C.I. cover (Heavy duty) the weight of the cover to be not less than 108 kg.
20
9469
189385
... More
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
20
7447
148947.6
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
75
8672
650428.4999999999
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
33577
67154.76
... More
Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
2
3612
7225.26
... More
Providing and fixing health faucet (hand shower) with 1m long Easy Flex Tube in Chrome finish & wall hook of Jaguar Make (Ref. Jaguar Cat. No. ALD-CHR-565) or equivalent make including cutting and making good the walls where required complete in all respects as per direction of Architect/EIC.
66
1909
125994
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
... More
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
105
3042
319495.05
... More
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
77
1879
144721.5
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
468
4439
2077480.08
... More
Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work.
25307
11
286222.17
... More
Demolishing brick /CC block work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
In cement mortar
558
2123
1184667.48
... More
Dismantling of Children's Park area manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge
1
25000
25000
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead of area 3 sq. metres and below.
470
378
177838.6
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
For thickness of tiles 10 mm to 25 mm
2772
75
209646.36
... More
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :
-
-
-
... More
15 mm to 40 mm nominal bore
360
155
55846.799999999996
... More
Above 40 mm nominal bore
180
167
30205.8
... More
Dismantling PVC pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :
480
12
6000
... More
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
24
930
22338
... More
Extra for levelling & neatly dressing and compaction of disposed items like dismantled PCC, RCC, hollow block etc. completely as directed by Engineer-in-charge.
1208
121
146844.48
... More
Recovery of salvage value/scrap value of recovered steel material at the time of dismantling of RCC structures including cost of transport from the site but excluding the cost of dismalting, labours, tools materials etc. complete.
25307
18
474506.25
... More
Recovery of salvage value/scrap value of recovered Doors, windows & cubboards material at the time of dismantling of buildings including cost of transport from the site but excluding the cost of dismalting, labours, tools materials etc. complete.
-
-
-
... More
Doors
158
1875
296250
... More
Windows
158
937
148125
... More
Ventilators
38
250
9500
... More
Cupboards
86
615
52924.4
... More
SITC of Cast Rasin Dry Type 500KVA 6/0.433 KV, 3 Phase, 50 Hz, Dyn11 vector group, copper wound, class F insulation associated with winding temperature indicator/controller actuated by means of resistance temperature detector embedded in LV windings, indoor type Transformer with Approximately 5% impedance, tapping for off load operation on HV side in steps of + 5% to -5% in steps of 2.5% , having cable end boxes on HV side suitable for 1Rx3Cx50 sqmm XLPE cable of 6.6 kV earthed /11 kV unearthed grade and 2RX3.5CX300 Sq.mm. XLPE on LV side with neutral brought out separately including supplying and laying of copper conductor multicore control cable from transformer to HT breaker for safety tripping, suitably mounted on RCC structure or M.S. Channel i/c supplying and grouting of suitable M.S. Channel with all accessories and confirming to IS 11171:1985 & as per specification attached complete in all respects as required at site and approved by EIC.
1
1843750
1843750
... More
Supplying and laying of Unearthed/earthed armored, aluminum conductor XLPE power cable of XLPE cable of 6.6 kV earthed /11 kV unearthed grade on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification and confirming to IS 7098 (Part II) amended upto date as per the following size:
3Cx 50 sqm
200
1638
327760
... More
HT Cable TERMINATION( Heat Shrinkable Type) Supply, installation testing commissioning of Indoor Type Termination for above 11 KVgr 3Core, 50 SQm cable with Cable gland, indoor type sealing Kits, insulation tape approved sealing epoxy compound, effecting gland & termination connections
4
1837
7350
... More
Supplying, installation, testing & commissioning of cubical type LT panel suitable for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system fabricated in compartmentalized (preferably) design from CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland, plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having 800 Amp capacity extensible type TPN aluminium alloy bus bars of hight conductivity, DMC / SMC bus bars of high conductivity, DMC/ SMC bus bar supports, with short circuit withstand capacity of 50 kA for 1 Sec., bottom base channel of MS section not less than 100 mm x 50 mm x 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common copper earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring PVC insulated copper conductor S/C cable, cable alleys, cable gland plates in two half, i/c providing following switch gears :-(Ref enclosed SLD ).
IP class:IP52 for Indoor/ IP65 with wheather proof enclosure for outdoor.
Busbars: Electrolytic grade aluminium alloy bus bars of hight conductivity
Busbar suppotrs:DMC/FRP/SMC
Loovers:Busbar chamber shall have louvers with fine mesh inside
Shade:Epoxy powder coated RAL 7035
All panels shall have space heaters
Note:1) All the breakers shall have potential free aux NO/NC conatcs for ON,OFF,TRIP 2) All the breakers shall have spreaders/phase separators/RHOM/Pad lock/Door lock/trip free 3)Breakers shall have provision to add shunt trip 4)All the AHU feedres shal be provided with shunt trip 5) Insulated shrouding shall be provided for live parts 6) FRLS PVC copper wires shall be used for control wiring 7) CT's shall be provided with shorting terminals 8) The dual source PDU's for Server/Hubroom shall be of different colour. 9) All MCCB’s feeders shall be provided with microprocessor based built-in short circuit, over load protection. earth fault protection.
-
-
-
... More
MAIN LT PANEL
1 No. - 800A, 4P Micro Processor Based MCCB (Icu = 50 KA for 1 sec, Ics = 100% Icu) with O\C, S\C, S\T Releases with aux & trip contact with interlocked door, automatic safety shutters, mechanical ON/ OFF and service/test/ isolated position indicators and frame earthing contact, conforming to IS 1397- 2 : 1993
1 no 800A 4P on load changeover switchLed type on, off & Trip indicating lamp. RYB Indicating Lamps of LED clustered type and Control MCBs shall be provided with ELR, Shunt trip, NO/NC contacts Type1+2, 50KA SPD with Isolator
1 Set - 3Nos. Dual Core tape wound CTs of Class0.2 for measurement and class 5P20 for Protection. The CT burdens hall be 10VA.
1 Set - Load Manager with RS 485 Interface and BMS compatible. panelvendor to provide Serial data of load manager/Main parameters on Modbus/Bacnet including Modbus/Bacnet port , provision for BMS cableentry & Protocol Integration details. Potential Free Contact and therequisite internal cabling upto RS 485/ BACNET port shall be provided byElectrical vendor
1 Set - TPN aluminium bus bars of minimum of 800 Amps capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bar cross section, size supports & their spacing etc. for withstanding fault level of 35 kA for 1 Sec.7 No. - 63A, 4P MCCB, Icu = 36 KA,4 No. - 160A, 4P MCCB, Icu = 36 KA,1 No. - 250A, 4P MCCB, Icu = 36 KA,25 mm x 5 mm copper flat earth bus bar running along the base of the frame covering entire length of the panel with GI bolt and nuts and number of drilled holes as required for earth connection.,1 - Danger Board.Complete Board as stated above
1
746430
746430
... More
FLOOR PANEL (FOR TYPE - II)
Incoming
1 No. - 250A, 4P Micro Processor Based MCCB (Icu = 36 KA for 1 sec, Ics = 100% Icu) with O\C, S\C, S\T Releases with aux & trip contact with interlocked door, automatic safety shutters, mechanical ON/ OFF and service/test/ isolated position indicators and frame earthing contact, conforming to IS 1397- 2 : 1993.
Led type on, off & Trip indicating lamp. RYB Indicating Lamps of LED clustered type and Control MCBs shall be provided with ELR, Shunt trip, NO/NC contacts.
1 Set - 3Nos. Dual Core tape wound CTs of Class 0.2 for measurement and class 5P20 for Protection. The CT burdens hall be 5 VA.
1 Set - Load Manager with RS 485 Interface and BMS compatible. 1 Set - TPN aluminium bus bars of minimum of 250Amps capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bar cross section, size supports & their spacing etc. for withstanding fault level of 50kA for 1 sec.
10 No. - 63A, 4P MCB, Icu = 10 KA,2 No. - 25A, 4P MCB, Icu = 10 KA
25 mm x 5 mm copper flat earth bus bar running along the base of the frame covering entire length of the panel with GI bolt and nuts and number of drilled holes as required for earth connection.1 - Danger Board.,Complete Board as stated above
1
405591
405591.3
... More
FLOOR PANEL (FOR TYPE - III/IIIA)
Incoming
1 No. - 160A, 4P Micro Processor Based MCCB (Icu = 36 KA for 1 sec, Ics = 100% Icu) with O\C, S\C, S\T Releases with aux & trip contact with interlocked door, automatic safety shutters, mechanical ON/ OFF and service/test/ isolated position indicators and frame earthing contact, conforming to IS 1397- 2 : 1993
Led type on, off & Trip indicating lamp. RYB Indicating Lamps of LED clustered type and Control MCBs shall be provided with ELR, Shunt trip, NO/NC contacts.
1 Set - 3Nos. Dual Core tape wound CTs of Class 0.2 for measurement and class 5P20 for Protection. The CT burdens hall be 5 VA.
1 Set - Load Manager with RS 485 Interface and BMS compatible. 1 Set - TPN aluminium bus bars of minimum of 160Amps capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bar cross section, size supports & their spacing etc. for withstanding fault level of 50kA for 1 sec.
Outgoing
6 No. - 63A, 4P MCB, Icu = 10 KA,2 No. - 25A, 4P MCB, Icu = 10 KA
25 mm x 5 mm copper flat earth bus bar running along the base of the frame covering entire length of the panel with GI bolt and nuts and number of drilled holes as required for earth connection.
1 - Danger Board.,Complete Board as stated above
3
303061
909183.8999999999
... More
External Lighting (Outdoor) - TIMER DB
Supply, testing and commissioning of 3 phase 415 volts MCB DB with multi channel programmable timers, connector box, contactors,auto/manual selector switchs, phase indicating lamps etc all complete conforming to latest edition of relevant Indian standards, rules & regulations with IP53 protection. The DB shall be fabricated out of CRCA sheet steel, cubical, outdoor, dead front & wall mounting type complete in all respect as per technical specification and drawings. Incomer - 1 no of 63A 4P MCB
Outgoing - 20 nos. of 10A/16A/25A SP MCB
1
33331
33331.3
... More
SUPPLY & FIXING OF MCB DB :
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, ommon neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . 8 way (4 + 24), Double door vertical type DB
1
17788
17788.75
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
8 way (4 + 24), Double door
22
10442
229729.5
... More
4 way (4 + 12), Double door
4
7159
28637
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole
576
448
258048
... More
Double pole
1
1148
1148
... More
Triple pole
1
1762
1762.25
... More
Four Pole 63A
27
1535
41445
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 40A, 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required
66
4623
305151
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 63A, 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required
4
5026
20104
... More
Single pole Blanking plate
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
30
22
682.5
... More
Earthing and Accessories
-
-
-
... More
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with
charcoal/coke and salt as required
10
11996
119962.5
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
4
24216
96866
... More
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including
connection/termination with GI thimble etc. as required.
1000
89
89250
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut
bolt & spring washer spaced at 50mm)
500
252
126000
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in
recess for connections etc. as required.
800
427
341600
... More
Providing and fixing 50 mm X 6 mm G.I. strip on surface or in
recess for connections etc. as required.
200
360
72000
... More
Providing and fixing 65 mm X 8 mm G.I. strip on surface or in
recess for connections etc. as required.
200
720
144000
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for
loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required.
1100
73
80850
... More
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt &
spring washer spaced at 50mm)
50
1701
85050
... More
CABLE AND ACCESSORIES :
Supply of 1.1 KV grade XLPE aluminium cable of following rating. (Non-Schedule item)
-
-
-
... More
3.5C x 240 SQMM AR CU XLPE CABLE
100
29982
2998250
... More
3.5C x 95 SQMM AR CU XLPE CABLE
580
9435
5472300
... More
3.5C x 35 SQMM AR CU XLPE CABLE
60
3265
195900
... More
4C x 16 SQMM AR CU XLPE CABLE
800
1756
1405040
... More
3Cx10 SQMM AR CU XLPE CABLE
200
912
182500
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/GI pipe/Cable tray/wall surface with clamp as required
Upto 35 sq. mm
1060
64
68635
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/GI pipe/Cable tray/wall surface with clamp as required
95 sq. mm and upto 400 sq. mm
680
234
159460
... More
Supplying and making indoor/outdoor end termination with brass compression gland and aluminium/copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable
of 1.1 KV grade as required
3½ X 240 sq. mm (62mm)
4
1797
7189
... More
Supplying and making indoor/outdoor end termination with brass compression gland and aluminium/copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable
of 1.1 KV grade as required
3½ X 95 sq. mm (mm)
24
899
21588
... More
Supplying and making indoor/outdoor end termination with brass compression gland and aluminium/copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable
of 1.1 KV grade as required
3½ X 35 sq. mm (28mm)
4
547
2191
... More
Supplying and making indoor/outdoor end termination with brass compression gland and aluminium/copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable
of 1.1 KV grade as required
4 X 16 sq. mm (28mm)
60
540
32445
... More
Supplying and making indoor/outdoor end termination with brass compression gland and aluminium/copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable
of 1.1 KV grade as required
3Cx10 SQMM AR CU XLPE CABLE
12
350
4200
... More
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription
duly engraved as required.
10
1023
10237.5
... More
Design, Fabrication, Supply, Unloading, Handling, Installation, Commissioning & Handing Over of of heavy duly hot dipped galvanised (65 - 70 Micron as per IS 2629) Ladder type cable trays of following sizes, suspended from ceiling or fixed vertically on wall/ column as per route directed at site, as approved complete as per technical specifications, drawings & relevant standards & site conditions.
(Tray shall be made out of 2 mm thick sheet, standard length 2.5mtr GI coupler plate2.5 mm thick with eight holes and 8 nos. 1 1/2' x 3/8 GI pasivated nut bolts with 2 nos plain washers & GI clamp for tray fixing along with GI hard ware.)
Note:
1) Rate Quoted shall include cold galvanizing paint on welded spots.
2) Rate Quoted shall include site fabrication of required Bends, T- Junction, Elbows, X-Junction, Z-Sections, Reducer etc.
-
-
-
... More
450 mm x 40 x 40 x 2 mm thick
100
1227
122750
... More
600 mm x 40 x 40 x 2 mm thick
50
1648
82440
... More
MS perforated cable tray 150 mm width X 40 mm depth X 1.6 mm
150
553
83062.5
... More
SUPPLY AND FIXING OF PVC CONDUIT
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the ame in case of recessed conduit as required.
-
-
-
... More
20 mm
3465
224
776160
... More
25 mm
2475
253
628031.25
... More
32 mm
990
322
318780
... More
CIRCUIT/ SUBMAIN WIRING :
Wiring for circuit/ submain wiring alongwith earth wire with the
following sizes of PVC insulated copper conductor, single core cable in surface/ recessed FRLS PVC conduit as required.
-
-
-
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
7920
481
3811500
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
440
768
338030
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell
point :
Supply and wiring of 1100 volt grade 2 x 1.5 sq mm single core multistrand FRLS PVC insulated and unsheathed copper wire (approved make) in PVC conduit with all its accessories recessed in wall or ceiling with 1 x 1.5 sq mm single core multistrand FRLS PVC insulated and unsheathed copper earth wire to light/ceiling fan/exhaust fan/call bell points with modular switch, modular plate, suitable GI box etc. complete as required.
-
-
-
... More
Single point controlled by one switch
580
1393
808404
... More
Two point controlled by one switch
440
1951
858572
... More
Three point controlled by one switch
150
2512
376875
... More
Four to eight light point controlled by one switch/ MCB
20
2977
59550
... More
Wiring for light/ power plug
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
2700
584
1578150
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
2 Pair
40
66
2660
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing
surface/recessed steel/ PVC conduit as required.
1000
82
82250
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit/raceway as required.
600
99
59850
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230
volts, complete as required.
20
173
3465
... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet
cover in front including painting etc as required.
-
-
-
... More
75 mm X 75 mm X 60 mm deep
40
311
12460
... More
100 mm X 100 mm X 60 mm deep
12
365
4389
... More
Supplying and fixing following modular switch/ socket on the
existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
2 way 5/6 amps switch
4
259
1036
... More
Telephone socket outlet
60
259
15540
... More
TV antenna socket outlet
60
259
15540
... More
Bell push
4
245
980
... More
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as
required.
-
-
-
... More
2 Module (75mmX75mm)
80
521
41720
... More
6 Module (200mmX75mm)
6
703
4221
... More
Supplying and fixing following Modular base & cover plate on
existing modular metal boxes etc. as required.
-
-
-
... More
1 OR 2 Module
80
232
18620
... More
6 Module
6
318
1911
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
70
645
45202.5
... More
Supply , wiring and fixing of 3No 6A Socket controlled by 1no 16A Switch with indicator including suitable size GI box with modular plate and cover in front on surface or in recess, including providing connections with 3x1.5 sq.mm. FRLS PVC insulated copper wire,conduit, flexible etc. as required (for computer).
160
3617
578800
... More
Supply and fixing in position 1000 mm wide rubber matting of 1100 volts grade as per electricity rules (exact length rubber mats to be worked out as per site requirement). Thickness of
rubber mats shall be not less than 6 mm.
10
1500
15000
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular
switch,connection etc. as required.
180
834
150255
... More
Supply , wiring and fixing of 5/6 pin 15/16 A modular socket outlet and 15/16 A modular switch including suitable size GI box with modular plate and cover in front on surface or in recess, including
providing connections etc. as required.
160
1025
164080
... More
Supply & Fixing 240 V, 25A Modular type socket, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [For AC]
60
2381
142915.8
... More
SUPPLY OF LIGHT & FAN FIXTURES:
Supply, Installation, Testing and Commissioning of Light fixtures with all accessories like driver along with Lamps and fixing the same in the wall / ceiling/false ceiling with wooden blocks, screws
,hardware’s ,suspended chain hooks as required as per the site conditions (including the ear thing of fixture)
-
-
-
... More
20W Extruded Aluminum housing LED batten 1200mm Long
(Philips Model No: BN021C LED20S PSU CW GR S2 or Eqv.)
110
1902
209275
... More
10W Extruded Aluminum housing LED batten 600mm Long
(Philips Model No: BN021C LED22S PSU CW GR or Eqv.)
64
926
59283.2
... More
10W LED Recessed Mounted Down light
70
2173
152166
... More
16W Slim Surface mounted LED down light Square type
160
1927
308400
... More
7W LED Bulkhead Lights
30
1766
52989
... More
1X18W LED Mirror Light
60
1567
94050
... More
18w Double bracket Light with Metal, Synthetic, Glass, Lamp base
E27
40
4182
167300
... More
18w Single bracket Light with Metal, Synthetic, Glass, Lamp base
E28
20
1270
25400
... More
1200mm sweep ceiling fan
80
3261
260904
... More
300mm sweep exhaust fan
65
2337
151937.5
... More
10W LED Bollard in IP 66 to ensure sustainable performance in all
sections and aesthetics, including UG cable for interconnection bollard light, concrete footing, painting etc. as required.
40
10850
434000
... More
65W POST TOP LANTERN and double arm 4mtr pole with decorative hot dipped galvanised mild steel step pole with grey powder finish including pole, UG cable for interconnection post top light, sintex box, MCB, concrete footing, painting etc. as required
49
61207
2999167.5
... More
LED STREET LIGHT with 4 Mtr Pole including pole, UG cable for interconnection street light, sintex box, MCB, concrete footing, painting etc. as required
16
49410
790560
... More
LED Strip with driver
4
3721
14885.2
... More
LIGHTNING CONDUCTOR
-
-
-
... More
Providing and fixing of lightning conductor finial, made of 25mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc.complete as required.
50
906
45325
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For
horizontal run)
1536
220
338688
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For
vertical run)
150
344
51712.5
... More
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and
spring washers etc. complete as required.
10
211
2117.5
... More
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode
directly in ground as required.
120
344
41310
... More
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with
charcoal/coke and salt as required.
25
11996
299906.25
... More
SUPPLY, INSTALLATION, TESTING AND COMMISIONING OF DG SET INCLUDING ALL ACCESSORIES
DG SET
Supply, installation, testing and commissioning of 20kVA prime (actual) rating , air cooled, diesel generating in Acoustic enclosure set along with PMG, base frame, Alternator, Static Excitation System, Lube Oil System, Electronic Governor, Batteries, Battery Charger, Instrumentation, day oil fuel tank, Silencer with Bellows, Alarms, Engine Control Panel, AVM Pads, AVR Panel, SG 4 / PCCM 3.3 or equivalent for AMF ,Synchronization and load dependent Start - Stop facility, Terminal Arrangements including cable termination box with all associated equipment / work as per specifications. Alternator shall have class H insulation and rated for 580 KW output at 47deg. C. Engine shall not be derated upto 50 deg.C ambient. Approval shall be taken for each panel in the form of shop drawings before manufacturing of the DG set.
1
595500
595500
... More
EXHAUST PIPE
Supply, installation, testing and commissioning of exhaust pipe fabricated out of 6 mm thick MS pipe with all fixing accessories and hardwares. The exhaust pipes shall be insulated with 75 mm thick mineral wool insulation wrapped in chicken mesh and clad with 24 gauge aluminium sheet including all supporting structure as required.
65 mm dia
35
3700
129500
... More
STATUTORY APPROVAL & CLEARANCE
Obtaining clearance from Central Pollution Control Board (CPCB) & State Pollution Central Authority in respect of noise level and emission level being within permissible level and obtaining clearance from Electrical Inspectorate.
1
200000
200000
... More
TESTING & COMMISSIONING
Supply, installation, testing & commissioning of temporary load bank of 20 kVA as required for the lower rated DG sets at unity power factor with all necessary cables and accessories for full load testing of all DG set at site. The diesel fuel for testing shall also be supplied as required for testing and included in the quoted price.
1
75000
75000
... More
Providing and Fixing Components in Children Park made of M.S Pipe of 3.5mm thickness and 5mm fiber Reinforced polymer, GI Bolts with two coats of acrylic weather resistant paint with primer including fixing in Position, transportation of all materials to work site at site and including the cost of materials, Labour Charges, tools and plants and all other charges etc. Complete as per the direction of Engineer-In-charge at site
-
-
-
... More
Imperial benches with cast iron sides
25
32319
807975
... More
Three seater -Canopy swing
4
134330
537320
... More
4 seater Sea saw( double plank)
2
82061
164122
... More
Rock Climber with Metal net Climber
2
133798
267596
... More
Girafee slide
1
127680
127680
... More
Two seater swing
2
62510
125020
... More
Twin DLX Combo slide
1
289940
289940
... More
Double sided spiral slide(14 ft)
1
301910
301910
... More
Fiber Reinforced Polymer Rabbit, crocodile, Dolphin Model Dustbins as per the direction of Engineer in charge to be placed along the children park area.
10
9975
99750
... More
Supply, installation, testing & commissioning of Pyramid Water Fountain, Pool dimension 6.5m x3m wide maximum height (for the best effect ):2.8m including construction of civil pool, 3HP Electric pumps, internal pipework and connections,
mounting frames, fittings and brackets for water effects and lights, etc. Water effects, mountings and connections. Waterproof colored lights, waterproof wiring and control panels etc all completed model as per drawings including cost of casting of concrete pool, water supply connection all arrangement as per model, the light & water connections cost of all materials labour charges, installation charges, Testing, Transportation charges of all materials to work site etc complete.
1
1400719
1400719.73
... More
Horticulture & Land scaping of the garden , Central children park, sitout Area, Beautification by Aesthetically Designing the surrounding with outdoor plants , including execution of miscellaneous works for enhancing the aesthetic appearance of the campus for Area development as directed by Engineer in charge including the cost of plants, plantation, providing manures, Area development by growing soft artificial grass, placing indoor corridor plants , Development of aesthetic appearance
630
600
378000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%