Directorate General Of Lighthouses And Lightships Tender

Demolishing of cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge including supply of all materials , labours, tools & plants and all other charges etc. complete as directed.

Nominal concrete 1:3:6 or richer mix

Demolishing of brickwork manually/ by mechanical means including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead including supply of all materials, labours, tools & plants and all other chargesetc. Complete as directed.

In cement mortar 1:3 / 1:4 Brick Masonry

Demolishing of Floor manually/ by mechanical means including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead including supply of all materials, labours, tools & plants and all other charges etc. complete as directed.

Nominal concrete 1:4:8 or Leaner mix / Higher Mix

Demolishing of stone rubble masonry manually/ by mechanical means

Engaging of Hitachi For Surface dressing and Surface Leveling of the ground including earth cutting , filling and removing vegetation, rubbish up to a distance of 50 m outside the periphery of the area cleared including supply of all materials , labours, tools & plants, fuels, loading unloading & transportation of Hitachi to work site and all other charges etc. complete as directed.

Hitachi Hire charges for working at site including transportation charges for shifting of Hitachi upto working site.

Providing & fixing of fencing post and struts made up of RCC 1:2:4(one cement: two coarse river sand:4 graded stone aggregate of 20mm nominal size) having 150X150mm cross section, 2.00m long with 4 Nos. 8mm dia Tor steel grade (Fe415) as vertical reinforcement and 6mm dia Tor steel grade (Fe 415) stirps @300mm C/C with all M.S hooks for fixing the chain link fencing etc embedding the same in C.C. 1:3:6(1 cement: 3 coarse river sand & 6 graded stone aggregate of 20mm nominal size) block of size 300X300X600 depth at the interval of 2.50 m centre to centre after excavating pit of 300X300X600mm depth, ramming the pits, handling and erecting the post as directed, concreting, back filling the remaining portion, disposing the surplus earth within a lead of 50m , including supply of all materials, labours, tools & plants, curing , Synthetic enamel painting two coats over one coat primer to RCC post as per drawing and all other charges etc complete as directed.

Providing and fixing of ready made Chain link fabric fencing mesh of size 50x50 mm made of G.I.wire of dia 4 mm PVC coated to achieve outer dia not less than 5 mm in required colour and shade, PVC coated to outer dia 5 mm over the RCC fencing posts in line and level and binding the same to posts using GI wire without sagging etc. including supply of all materials , labours, tools & plants and all other charges etc. complete as directed.

Providing and fixing of gate of size 3.0mX1.50m made up of 32mm B class G.I pipe outer frame, vertical of MS flat 25X6mm, 30Nos. welded to the pipes, providing necessary pivot pin arrangement 4Nos. For opening and closing the gate including the fittings & fixtures like Aldrops and Tower bolts etc. as per drawing including synthetic enamel painting. Constructing gate RCC pillars of size 300X300mm, height 2150mm, 02Nos. concreting with RCC1:2:4 and fixing to the gate pillars in line and level with necessary plastering the pillars with CM 1:3, 12mm thick and exterior emlsion painting on RCC column etc as per drawing including cost of all materials, labour, tools & plants and all other charges etc, complete as directed.

Supply & fixing of Stainless Steel board (design board with eastheticaly good with curves and other fittings) size 3.0m X 1.0m and Stainless Steel leg 3.5m high with Vinyl printing (Sticker type )with printing & fixing writing/ designing name plate board, like departmental logo, technical details or any other details which directed by the Engineer In Charges, including cost of all materials, labours, tools & plants, welding, grinding to give smooth finish charges and loading & unloading , transportation to the site , fixing with concrete at site including cost of all materials, labour, tools & plants and all other charges etc, complete as directed