Andaman Lakshadweep Harbour Works Tender

Providing and laying 12.50 liter capacity flushing cistern including cost of flushing cistern, fixing in position, cost of transportation charges of all materials to worksite, all labour charges, minor tools, LWC, GST, etc, complete.

Removing and disposing of night soil from septic tank by Mechanically operating vehicle, including cleaning the blockages and removing of night soil and soaked earth from surrounding area of septic tank and disposing the removed sludge/ materials including hire charges of equipped vehicle, all labour charges, minor tools, GST, LWC, etc, complete.

Removing and disposing of night soil from inspection chamber by manually including removing and refixing of cover slab, cleaning and blockages in sewage pipes and removing of night soil and soaked earth from surrounding area of the inspection chamber and disposing the removed materials at a distance of 500 mtrs from the inspection chamber including cost of kerosene, phynoil, soap all labour charges, minor tools and plants, GST, LWC, etc, complete.

Providing form work including centering, shuttering, propping etc, height of propping and centering below supporting floor to ceiling and exceeding 4 Mtrs and removal of the same in site reinforced cement concrete and plain concrete work using marine plywood, as directed by EIC, including cost of all labour charges, transportation charges of all materials to worksite, minor tools, GST, LWC, etc, complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:2:4 (1 cement, 2 pulverised sand and 4 graded local quarry stone aggregate 20 mm nominal size) including cost of all labour charges, all materials, transportation charges of all materials to work site, minor tools, GST, LWC, etc, complete.

Plastering with cement mortar 1:4 (1 cement and 4 mainland river sand) 12 mm thick over hollow block wall and exposed concrete surface etc, including cost of cement, mainland river sand, screening and washing of the sand all labour charges, curing, transportation charges of all materials to work site and minor tools, GST, LWC, etc, complete.

Providing and fixing I st quality ceramic glazed wall tiles 300 x 450 conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle, green, black of any size as approved by EIC, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 mainland river sand) including cost of cement, mainland river sand and jointing with grey cement slurry @ 3.3 Kg per sqm, including pointing in white cement mixed with pigment of matching shade complete, including cost of cement, grey/ white cement transportation charges of all materials to work site, all labour charges, minor tools, GST, Loc, etc, complete.

Providing and laying I st quality Ceramic glazed Floor tiles (300 x 300 mm, thickness to be specified by the manufacturer) confirming to IS 13753 of approved make like Nitco, Oreint, Somany, Kajaria, or equivalent make, laid on 20 mm thick bed of cement mortar 1:4 (1 cement, 4 mainland river sand) including pointing the joint with white cement and matching pigment, including cost of cement, white cement, transportation charges of all materials, to work site, all labour charges minor tools, GST, LWC, etc, complete.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window /ceosetory windows &other frames/chokhat comprising of virgin PVC polymer of K value 58-60 ( Suspension grade), cvalcium carbonate and natural fibers (Wood powder /rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints aftre applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750Kg/cum, screw withdrawl strength of 2200N (face ) & 1100 N(Edge), minimum compressive strength of 58N/mm^2, modulus of elasticity 900N/mm^2 abd resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast/lugs/SS dash fasteners of required dia and length complet as per direction of Engineer-In-charge.(M.S hold fast/lugs or SS dash fastener shall be paid for separately). including the cost of all materials , transportation charges, minor tools, GST & LWC etc, complete

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) Solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade) ,calcium carbonate and natural fibers ( Wood powder/ rice husk /wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawl strength of 1800N (Face ) & 900N (Edge), minimum compressive strength 50N/mm^2, modulus of elasticity 850 N/mm^2 and resistance to spred of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk s.s screws, all as per direction of Engineer-in-charge.( Note: Stainles steel butt hinges and necessary S.S screws shall be paid seapartely). including the cost of all materials , transportation charges, minor tools, GST & LWC etc, complete

Trimming of trees in proper shape for giving good acetic views in connection with the VVIP visit, including cost of all labours charges, minor tools, GST, LWC, etc, complete.

Painting two coats with ready mixed paint of approved brand and manufacture in all shades to give an even shades, preparation of surface including cleaning, scrapping of the existing painted surface, cost of ready mixed paint, brushes, transportation charges, scaffolding arrangements, all labour charges, minor tools, GST, LWC etc, complete. Old wood work

Providing and fixing anodized aluminium work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provisions for fixing of fittings wherever including the cost of PVC/ neoprene gasket required including cost of all materials, fittings, transportation charge sof all materials to work site,all labour charges, minor tools, GSt, LWC, etc, complete.

Two coats on old work painting with synthetic enamel colour paint Ist quality of approved brand by EIC (Ultima/ All guard/ Asian/ Nerolac/ Berger) or equivalent over steel surface, preparation of surface including cleaning, scarping of the existing painted surface, cost of paint, brush, scaffolding arrangements, transportation charges of all materials to work site all labour charges, minor tools, including of GST, LWC, etc, complete.

Providing and supply of following labourers as and when required for attending miscellaneous day today works, such as uprooting the bushes in the entire complex, dumping with a lead of 100 mtr, gardening, attending minor plastering works, carpentry works and other miscellaneous repairs works in Guest House, officers & staff qtrs, CE & A Qtr. including cost of minor tools, GST, LWC, etc, complete, as directed by the EIC.

a) Skilled Mazdoor

b) Semi-skilled Mazdoor

c) Un-skilled Mazdoor

Removing existing damaged PVC doors and providing and fixing solid PVC paneled door of ISI mark of approved brand with 3 mm thick and frame provided with 5 mm thick, PVC, including cost of all labour charges, minor tools, transportation charges, scaffolding charges, GSt, LWC, etc, complete.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. including all labour charges, all materials minor tools & plants, transportation charges to all materials to the worksite LWC & GST etc complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth, all labour charges, all materials minor tools & plants, transportation charges to all materials to the worksite LWC & GST etc complete.

Painting two coats over old wall with plastic emulsion paint of approved brand by EIC (Ultima/ All guard/ Asian/ Nerolac/ Berger) or equivalent of required colour and manufacturer to give an even shade at all locations, preparation of surface including cleaning, scrapping of the existing painted surface, cost of emulsion paint, brushes, scaffolding arrangements, transportation charges, all labour charges, minor tools, GST, LWC, etc,complete.

Providing and fixing on wall face unplasticised, PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS 4985 including jointing with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expansion, (110 mm dia), including cost of pipes, all labour charges, minor tools, GST, LWC, etc, complete.

Providing and laying and fixing 110 mm dia PVC pipe 6 Kg/cm2 from W.C. to inspection chamber including fittings of PVC pipes, bends, tees, HCI cowls vent pipe etc, wherever required as per the direction of EIC, cost of all labour charges transportation charges, minor tools, etc, complete.

Demolishing Hollow Block Masonry work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Providing and fixing 20 cm thick masonary with Hollow Block of size 0.40 x 0.20 x 0.20 Mtrs. Cast with 1:3:6 cement concrete (1 cement, three crushed stone sand & six graded 20 mm and down size) including curing, fixing with cement mortar 1:4 (1 cement, 4 crushed sand) in walls, again curing, including cost of cement, hire charges of hollow block machine, making charges, transportation charges of all materials to work site, cost of pallets scaffolding charges, minor tools, GST, LWC, etc, complete.

Providing eaves or facia board with Everest Heavy Duty board/ endure board or equivalent (non asbestos fibre cement board) of 12 mm thick 30 cm wide with brass screws etc, as per the direction of EIC, including cost of board, nails, brass, screws, scaffolding etc, all labour charges, transportation charges of all materials to work site, minor tools, GST,LWC, etc, complete.

Providing and fixing 6 mm thick oceanic sheet ceiling of Everest or equivalent make of size 610 mm x 610 mm with necessary nails etc, in the existing aluminium framed ceiling, including cost of Oceanic Sheet, all labour charges, transportation charges, minor tools, GST, LWC, etc, complete.

Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately)including cost of all materials, tarnsportation charges, minor tools, GST , LWC , etc, complete.

Providing and fixing glazing in aluminium door, window, ventilator, shutters and partitions etc, with PVC neoprene gasket etc, complete as per the architectural drawings and the direction of EIC, (cost of Aluminium snap beading shall be paid in basic item) with glass panes of 5.0 mm thickness (weight not less than 10.00 Kg/ Sqm including cost of board, nails, brass,screws, scaffolding etc, alllabour charges, transportation charges of all materials to work site, minor tools, GST, LWC, etc,complete.

Providing and fixing 12 m thick prelaminated three layor medium density (exterior grade) particle board Grade 1, type- Ii conforming to IS: 12823 bonded with phenol formaldyde synthetic resin, of approved brand and manufacturer in panelling fixed inaluminium doors, windows shutters and partition frames with C.P. brass/ stainless steel screw etc, complete as per architectural drawings and direction of the EIC, including cost of board, nails, brass screws, scaffolding etc, all labour charges, transportation charges of all materials to work site, minor tools, GST, LWc etc, complete. Prelaminated particle board with decorative finish on both side.

Providing and fixing white vitreous china wash basin (ISI) marked with CI/ MS brackets, 15 mm CP brass pillar taps, 32 mm CP brass waste of standard parten, including painting of fittings and brackets, cutting and making good the walls, wherever required, all materials, all labour charges, minor tools, transportation charges, GST, LWC, etc, complete. Flat back wash basin size 550 x 400 mm with a single 15 mm CP brass pillar taps.

Providing and fixing white vitreous china pedestal type water closet (Eropean type W.C. pan) with seat and lid Cp brass hinges and rubber buffers, 10 litre low level PVC cistern flush pipe with fittings and clamps, overflow arrangement with specials and mosquito proof coupling of approved municipal design including painting of fittings and brackets, cutting and making good the walls and floors wherever required, transportation charges of materials to work site, all labour charges, minor tools, LWC, GST, etc,complete. WC Pan with white solid plastic seat & lid)

Providing and fixing wall paneling 15 mm thick superior quality chemicals pressure treated edge glued finger jointed rubber wood boarding tongued grooved fixed over rubber wood frame work with rubber wood runner of size 50 mm x 15 mm fixed at 600 mm CC by secret nailing with brass screws duly fixed to wall including provision of designed rub wood beading and top and bottom termination of wood boarding and finished with two coats of melamine polish over a coat of honey/ natural colour wood filled putty etc, including cost of preparation and applying san paper and finishing to a glossy/ mat finish, rubber wood, all labour charges, transportation of materials, minor tools, GST, LWC, etc, complete.

Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level, including cost of cement, local stone aggregates, transportation charges of all materials to work site, all labour charges, minor tools, GST, LWC, etc, complete. 1:1½:3 (1 cement, 1½ mainland river sand, 3 graded stone aggregates 20 mm nominal size)

Fabrication and fixing steel reinforcement for RCC work including cutting, bending, binding and placing in position cost of binding wire, minor tools, GST, LWC, etc, complete.

Cleaning of RCC sump (water storage tanks) with latest technology by mechanized dewatering, sludge removal, vacuum cleaning including high pressure cleaning system and providing anti bacterial spray and UV treatment including all labour charges, all materials, all equipments/ machineries and its transportation GST, LWC, etc, complete.

Painting two coat of 1st quality exterior emulsion antifungal paint of approved brand and manufacture heavily undercoated texture of old surface to give an even shade including cost of paint cost of other materials, scaffolding arrangement, scrapping of existing paint surface wherever required, all labour charges, cost of minor tools, transportation charges, scaffolding charges, LWC including GST, etc, complete.

Applying one coat of cement primer of approved brand and manufacture on walls suface including cost of cement primer, brushes, scaffolding arrangments, transportation charges, all labour charges, minor tools etc. complete. The rate is inclusive of consumable items and GST & LWC.

Providing and fixing stainless steel kitchen sink as per IS 13983 with CI brackets and stainless steel plug 40 mm including painting of fittings and brackest, cutting and making good the walls wherewer required, transportation charges of materials to work site, all labour charges, minor tools, LWC, GST etc, complete. Kitchen sink with drain board, size 400 x 450 bowl depth 178 mm.

Providing and fixing net (Mosquito net/ nelton) to doors, windows, ventilators, shutters and partitions etc, as per the direction of the EIC including cost of all materials including PVC net, male, female strip, coupling channel, screws and nuts all labour charges, minor tools LWC, GST, etc, complete.

Melamine polishing on wood work, make surface with grinding machine till the wood with natural colour and smoothening the surface with sand paper of different sizes, applying one coat filler and rubbing with water paper, after drying filler for 6 to 8 hours applying two coats sealer and rubbing with water paper, applying two coat of Melamine /Glossy finish etc. complete.

Dismantling roofing including ridges , hips valleys and gutters etc. and stacking the material within 50 metres lead, cost of all labour charges, minor tools , labour welfare cess, GST etc, complete.

Providing and fixing pre-painted galvalume (PPGL)steel profile sheet AZ-150 of brand TATA bluescope steel, Everscope Industtries Ltd. JSW steel Ltd., Jindal India Ltd. or equivalent ( size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05%), total coated thickness with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade , 5-7 microns epoxy primer on both side of the sheet and polester top coat 15-18 microns. Sheet should have protective guard scratches during transportation and should be supplied in single length upto 12 metre or as desird by Engineer-in-charge .The sheet shall be fixed using self drilling/ self tapping screws of size (5.5x55m ) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces , excluding the cost of purlins , rafters and trusses and including cutting to size and shape wherever required.including all labour charges, minor tools labour welfare cess, GST etc, complete.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness , Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade , 5-7 microns epoxy primer on both side of the sheet and polester top coat 15-18 microns using self drilling/ self tapping screws complete ( Ridges plain -500-600mm), including cost of all labour charges, minor tools, transportation charges, scaffolding charges, labour welfare cess, GST etc, complete.