Works Department Tender

Providing Fly Ash brick masonry work in Foundation and Plinth using (250mm x 120mm x 80mm ) size bricks having crushing strength not less than 75Kg / Sqcm in cement mortar (1:6) for brick masonry walls after immersing the bricks for minimum 6 hours in water before use with all necessary projections, splays cutting, circular moulding, corbelling etc as per drawings including cost, conveyance, royalties, loading and unloading of all materials and all labour for work including scaffolding, watering and curing, sundries, T&P etc. complete as per the direction of the Engineer-in-charge.

Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 grade in following items as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 10 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.

Column Footing

Column

Ground Floor

First Floor

Second Floor

Grade Beam/Plinth Bend

Lintel

Ground Floor

First Floor

Beam

Ground Floor

First Floor

Second Floor

Roof Slab

Ground Floor

First Floor

Second Floor

Chajja(0.0625 mt thick)

Ground Floor

First Floor

Stair Case

Ground Floor

First Floor

Supplying and Straightening bent up or coiled rods, cutting, bending, crancking hooking welding or jointing (if required) the Tor Steel of SAIL/RINL/TATA/JINDAL/SHYAM STEEL make with binding wires and binding tying the grills, hoisting, lowering & placing in proper position as required for all types of R.C.C. works including cost, conveyance of steel and binsding wire of of 18 to 20 gauge and labour with T & P required for the work etc. complete in all floors (weight of binding wires will not be considered for payment , and payment will be made on weight of Tor Steel Only.

Ground Floor

First Floor

Second Floor

Cement concrete of proportion (1:2:4) using 12mm size clean hard black crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm (6”) thick to the required level ramming, watering and curing etc. complete including cost and conveyance of all materials with and royalties and all labour with T&P required for the work etc. complete including dewatering if required.

Providing Fly Ash brick masonry work in Superstructure using (250mm x 120mm x 80mm ) size having crushing strength not less than 75Kg / Sqcm in cement mortar (1:6) for brick masonry walls after immersing the bricks for minimum 6 hours in water before use with all necessary projections, splays cutting, circular moulding, corbelling etc as per drawings including cost, conveyance, all royalties, loading and unloading of all materials and all labour for work including scaffolding, watering and curing, sundries, T&P etc. complete as per the direction of the Engineer-in-charge.

Ground Floor

First Floor

Second Floor

Providing 12mm thick cement plaster to the surface of brick masonry wall in cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance,Royality, loading and unloading, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.

Ground Floor

First Floor

Second Floor

Providing 16mm thick cement plaster to the surface of brick masonry wall in cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, Royality,loading and unloading, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.

Ground Floor

First Floor

Second Floor

Providing and laying 600 mm x 600 mm Non-Skid vitrified tiles of colour series(Kajaria/Johnsons) of approved quality premimum grade of 8mm to 10mm thickness in Floor Tiles colour serise of without any warpage laid over an under layer of 25 mm thick base of cement mortar (1:1) (1 cement: 1 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.

Ground Floor

First Floor

Providing fitting and fixing of precast vitrified tiles colour series of(Kajaria/Johnsons) approved quality premimum grade of 8mm to 10mm thickness in dadoes skirting and risers to steps on 12mm thick cement plaster (1:3) jointed with cement slurry mixed with pigments to match the shades of the tiles including finished smooth watering and curing with cost, conveyance, royalities of all materials all labours T&P required for the work etc. complete in all respect as per the direction of E.I.C.

Ground Floor

First Floor

Providing fixing and fitting Industrial tiles(Kajaria/Johnsons) flooring in floors or Treads in 25mm thick Bed of CM (1:1) jointing with neat and cement slushy mixed with pigment to match the shade of the tiles etc complete with cost,conveyance, Royalities,Taxes of all materials usedr the work,all labour T&P etc in all respects

Ground Floor

First Floor

Supplying and fitting-fixing of Un-Plasticised poly Vinyl Chlorider (UPVC) (FENESTA/NCL/VEKA LTD.) Casenent Door 60- Series duly manufactured using UPVC reinforced profiles of 60mm x 55mmx2.25mm for outer frames 102mmx 60mm x 2.25mm for caseemnt door sash profile and 74mm x 60mm x 2.5mmmulion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0mm prefabricated & welded through fusion weiding the window the door lsash shall be fitted with 12mm thick WPC board of greenply make duly fixed with EPDM weathering seal resistant accessories like clipong locking system made of aluminum 1 no. per set of sashes and the system is to be installedat the site using es anchor fasteners silicon rubber sealant easy galzing/ deglazing at site etc. including cost and conveyance of all materials accessories labour charges, materials and product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards.Including cost, conveyance, all labour T&P etc complete as per direction of Engineer-In-charge.

Supplying and fitting-fixing of Un-Plasticised poly Vinyl Chlorider (UPVC) (FENESTA/NCL/VEKA LTD.) Three Track. Three Panel sliding window -60- Series duly manufactured using UPVC reinforced profiles of 108mm x 45mmx2.5mm for outer frames and window sash of 39mmx 58mm x 2.5mm capable of mounting single glasing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion weiding the window frame shall be fitted wiht 6mm thick clear tougheried glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reainforced Large Coupler at the site using anchor fasteners silicon rubber sealant easy galzing/ deglazing at site etc. including cost and conveyance of all materials accessories labour charges, materials and product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards.Including cost, conveyance, all labour T&P etc complete as per direction of Engineer-In-charge.

Supplying of M.S. Grill/Gate of approved quality and design to windows and openings & stair case railing and parapet railings etc. including making holes in walls and RCC structures or wood work etc. in proper position making good the damages of walls or RCC or other structures complete including mending or cutting sizes or grooves in choukaths with cost and conveyance of all materials, labour with T&P required for the work and royalties etc. complete ( including screws) in all respect in all floors. as diredted by E.I.C

Labour for fitting & fixing M.S. Grills, M.S. gate will of approved quality and design to openings in proper position including making holes in walls RCC structure and wood work etc and making good to the damages to walls or R.C.C. structure including mending or cutting to sizes or grooved in walls and fixing with R.C.C. (1:2:4) with hard black broken granite stone chips of 12mm to 20mm (1/2” to ¾”)(20mm not to exceed 25%) with cost and conveyance of all materials, labour and royalties with all T&P etc. complete. In all floors.

Finishing plastered surface with wall cement based wall putty (wate based) to receive primer etc including cost, conveyances, of wall cement putty & all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.

Ground Floor

Ground Floor

Wall painting two coat with P.E paint over a coat of primer including cost conveyance P.E Paint ,Primer and all materials labour & T&P require for the work etc. complete as directed by E.I.C.

Ground Floor

First Floor

Painting 2 (two) coats with any approved colour weather coat over a coat of wall cement primer to out side surface of wall of approved shade and quality etc including all cost of primer and weather coat, conveyance, , all labour T&P etc complete as per direction of Engineer -in- charge.

Ground Floor

First Floor

Painting two coat with enamel paint over a coat of priming over including cost conveyance of anamel Paint,Primer and all materials labour & T&P require for the work etc. complete as directed by E.I.C.

Ground Floor

First Floor

2.5 cm thick Grading Concrete (1:2:2) on roof slab with 4.7mm size H.G. Crusher broken Chips mixing with admixture such as Polysulphide chemical compound including cost, conveyance of all materials, labour and T&P required for the work etc. complete as directed by the EIC.(First Floor)

Cement concrete of proportion (1:5:10) in foundation and floors using 4cm (3/2”) size clean hard black Crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm (6”) thick to the required level, ramming, watering and curing etc. complete including cost and conveyance of all materials with royalties and all labour with T&P required for the work etc. complete including dewatering if required.

Supplying, Fitting and Fixing Gypsum Board ceilling with Aluminium anodized T section No 1705 with 2 ft center to center,L section No 1705 upto 15 micron on walls to be fixed by means of steel screws and P.V.C plug and the Al.grid 2'x2' with Gypsum Board including cost, conveyance of all materials, all labour T&P etc complete as per direction of Engineer -in- charge.

Ground Floor

First Floor

Back filling of surplus exacavated earth at work site by intial lead of 50.00 mtr including cost, conveyance of all materials, labour and T&P required for the work etc. complete as directed by the EIC.

Supplyin fitting and fixing steel of 304 grade in hand railling using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @0.90 mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved disign . including conveyance of all materials and etc with all labour and T&P required for the work complete including side shuttering.as per direction of Engineer -in- charge.

PH Work Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.

Ground Floor

20mm dia PVC Pipe

25mm dia PVC Pipe

First Floor

20mm dia PVC Pipe

25mm dia PVC Pipe

Roof of 1st floor

32mm dia PVC Pipe

Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.

15mm dia CP angle stop cock (Jaquar)CON-CHR-059KN

15mm dia CP two way bib cock (Jaquar)CON-041KN

15mm dia CP short body bib cock (Jaquar)CON-CHR-047KN

15mm dia CP long body bib cock (Jaquar Make)CON-107KN

20mm dia CP concealed stop cock (Jaquar Make)CON-089KN

25mm dia Brass FW Valve

32mm dia Brass FW Valve

25mm dia CP Health Faucet (Jaquar Make)ALD - CHR - 565

CP Extension Piece

125mm CP Grating

C.P. Flange

Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge

2000 liters capacity PVC water storage tank at roof First floor

supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.

Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.

110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)

75mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)

110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)

110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)

110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Socket plain (Ori Plast/Finolex/Supreme Make)

Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.

580mm size Orissa pan (Hindware/Parryware/Neycer make)

Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge

10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )

Supplying all materials, labour, T&P and fixing vitreous china water closet,European wc) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.

European water closet (Hindware/Parryware/Neycer make)

Supplying all materials,labour,T&P and fixing Flat back lipped wall (stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal

Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge

Differently Abled series (1no) Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge

550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal

Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.

600mmx450mm size B.E mirror (swivelled type)

Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge.SINGLE PIECE-WATER COLSET P TRAP - LYS-WHT-0204P

CP soap Dish holder (Jaquar make) CAN - MCH - 1131N

CP towel ring (Jaquar) CAN - ANQ - 1121

Grab bar (Jaquar make) WAC - WHT - BAI 090

450MM long Grab bar (Jquar make)AHS - CHR - 1507

Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge

550mmx400mm W.H.basin (Jaquar/ Johnson make)with 15mm dia C.P. pillar cock with pedestal

Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

CP towel rail (Plaza/ Johnson Make)

Towel ring (Plaza/ Johnson Make)

Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.

600mmx125mm plate glass shelf with CP/NP guard rails.

Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.

BE Mirror Wallmount (Best quality)

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

CP soap Dish

Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge

Inside size 76cmx76cmx46cm with 18” dia RCC MH cover

Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.

Ground Floor Concrete 02x2.25mx4.25mx0.075m=1.43 cum

First floor Concrete 02x2.25mx4.25mx0.075m=1.43 cum

Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge )

Vitrified Tile Kajaria tiles 30x30cm Ground Floor tile 2x2.25mx4.25m=19.13 sqmt

Ground Floor tile 2x2.25mx4.25m=19.13 sqmt

Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge ) Kajaria tile 40x25cm

Kajaria tile 40x25cm Ground Floor wall Tile 2x12.250x2.1m= 51.45 sqmt

Ground Floor wall Tile 2x12.250x2.1m= 51.45 sqmt

Providing fitting, fixing of Aluminium door with anodized AL. door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. Ref : OBI10

Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 120 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 120 liter's along with 3 noa of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge

Aqiard [ire Cjo;; 120 PSS UV

EXT PH Work Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge

100mm dia P.V.C. pipe

160mm dia P.V.C. pipe

Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification.

MH size 0.90m x 0.80 m with 0.45 m (18” dia RCC Cover )

Supplying all materials labour T&P and constructing 1.20m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.

1 no 14,000 ltr capacity R.C.C. Under ground sump Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.

1x3.36x3.36x1.50

Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft.

1x3.36x3.36x0.50

Supplying all labor T&P & filling foundation and plinth with sand filing materials well watered & rammed etc. all complete as per direction of EIC.

2x3.36x0.15x1.60 2x3.06x0.15x1.60

Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. 1x3.36x3.36x0.15

Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.

Floor 1x3.36x3.36x0.10 Roof 1x3.06x3.06x0.10 Wall 2x3.06x0.13x2.00 2x2.80x0.130x2.00

Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.5.12 cumx2.50x35.32= 452.09 say 452 kg

Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge

RCC floor, roof slab chhaja up to 4.430 m height Roof-1x2.80x2.80 2(3.06+3.06)x0.10 Wall 2(2.80+2.80)x2.00 2 (3.06+3.06)x2.0

Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.

Inside 1x2(2.80+2.80)x2.00 Floor 1x2.80x2.80 Out Side 1x2(3.06+3.06)x0.06

Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge

2 (2.80x2.80)x2.0 1x2.80x2.80

Supplying all materials labour T&P filling sand in foundation and plinth with well watered and rammed etc. all complate. As per direction of ELC.

1 no 30 Users Septic tank Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.

4.09mx2.09mx1.50m=

Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.

4.09mx2.09mx0.63m=

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

4.09mx2.09mx0.08m=

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

4.09mx2.09mx0.15m= 3.13mx1.13mx½(0.03m+0.13m)=

Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.

3.66mx1.66mx0.10m=

Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge

RCC floor, roof slab chhaja up to 4.430 m height 3.10mx1.10m= 2(3.66m+1.66m)0.10m=

Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.

2(3.89m+1.13m)0.38mx0.70m= 2(3.63m+1.13m)0.25mx1.30m=

Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.

(1.92m+1.87m)1.13m= 2x3.13mx1.90m= 2(3.89m+1.89m)0.70m= 2(3.63m+1.63)1.43m=

Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification.

Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge.

Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge.

2(4.09m+1.89m)0.10mx0.70m= 2(4.09m+1.63m)x0.23mx1.20m=

Rain Water Harvesting System Supplying all materials, labour, T&P and fitting and fixing U-PVC, SWR soil waste ventilating pipes and fitting of the following outside diameter conforming to 13592/1992 to walls with nails bobbins and wooden plugs or laying in trenches including with supply of approved rubber lubricant by non-heat application method as per manufactures specification testing earth work in excavation in all kinds of soil and refilling of trenches all complete as per specification and direction of the Engineer in charge.

110mm U-PVC SWR Pipe

Supplying all materials labor T&P and binding glazed stone ware pipes and aligning to requisite gradient inside the trench to jointing with tarred cascade and cement motor prop.(1:1 )encasing the pipe all around with CC(1:3:6) with washed gravel CC(1:4:8) with hard stone metal size 25mm to 50mm on bed on the trench lowering the pipe to bed on trenches in earth work in excavation trenches in all kinds of soil and refilling the same in 30mm layers watering ramming and removal of surplus earth disorient sewer line including use of T&P sight rails binding rods plug lights etc .all complete as per P.H .Specification. All round concrete encasing up to 1.50metre depth.

160mm dia P.V.C.

Supplying all materials labour T&P and constructing 1.80m dia x 2.60 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.

Construction of 1 Nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer(DTH) drilling rig or combination rig with PVC pipe and installation of submersible pump set with all accessories Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only

Drilling of 200mm dia bore 00 mtr to 30mtr 31 mtr to 45mtr

Drilling of 200mm dia bore 31 mtr to 45mtr

Drilling of 150mm dia bore 46 mtr to 176 mtr,

Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.

Lowering of 200mm dia P.V.C casing pipes 00 mtr to 30 mtrs,

Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.

200mm dia PVC (sch-80),

Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)

Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge

By DTH Rig

Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:

Rocky terrain with boulder formation for 300m depth

Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)

1 H.P. Single phase/ three phase 3 stage head range of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm

DOL Control panel

40mm dia steel short piece

Well cap

50mm size CI bracket

2.50sqmm flat cable

20mm dia rigid UPVC pipes

Steel rope with cover

Labour charges for lowering including transportation

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor IS marked galvanised mild steel tubes (medium grade) confirming to IS: 1239/1990, part-1 of the following nominal bore, tube fittings and clamps including making good the wall , ceiling and floor, testing, cost & conveyance of all materials to worksite, payment of all taxes etc all complete as per P.H specification and direction of the Engineer-in-charge.

32mm dia HDPE Pipes (Finolex/ Supreme make)

EI WORKS Recessed wiring to light points / fan points/ Exhaust fan / call bell point with 1.5mm2 FRLS PVC insulated SC multistrand copper conductor of ISI marked (Finolex/ Polcab/KEI/ Anchor) with 20mm dia non-metalic PVC flexible conduit (Make- AKJ/ KINJAL/ POLYCAB/ ANCHOR) with 5/6Amp., 250V Modular switch ISI marked and ceeling rose of ISI marked (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze) mounted an Modular G.I. box with Modular base and cover of suitable size (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze), with 1.5sq.mm FRLS PVC insulated single core multistrand Cu. condoctor as earth wire including all accessories and connection. As per direction of Engineer in Charge. (Make of wire Finolex / L&T/ Anchor / KEI/ Polycab/ V-Guard) Gr. Floor Group-A.

Group-B.

Group-C.

1st Floor Group-A.

Group-B.

Group-C.

Supply and fixing of 6Amp 3Pin modular socket with 6Amp modular switch on existing board. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.) Gr. Floor

1st Floor

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.) Gr. Floor

1st Floor

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.) Gr. Floor

1st. Floor

Supply and fixing of 3 nos. of 3 pin 5/6 amp modular socket and S.P. 5/6 amp one way modular switch, 1 no. of 5 pin 15/16 sockety out let and S.P. 15/16 A one way modular switch on modular G.I. Box with modular base and cover. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.) Gr. Floor

1st. Floor

Recessed wiring to submain in the following sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metalic heavy duty flexible conduit 1.6mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required. (Make of wire Finolex / KEI/ Polycab/ L&T/ Anchor) a) Gr. Floor 1x1.5mm2 for Inverter wiring.

b) 2x1.5mm2 + 1x1.5mm2. in 20mm dia

c) 2x2.5mm2 + 1x1.5mm2. in 20mm dia

d) 2x4mm2 + 1x1.5mm2 in 20mm dia

e) 2x6mm2 + 1x2.5mm2 in 25mm dia

f) 4x6mm2 + 2x2.5mm2 in 32mm dia

a) 1st. Floor 1x1.5mm2 for Inverter wiring.

b) 2x1.5mm2 + 1x1.5mm2. in 20mm dia

c) 2x2.5mm2 + 1x1.5mm2. in 20mm dia

d) 2x4mm2 + 1x1.5mm2 in 20mm dia

e) 2x6mm2 + 1x2.5mm2 in 25mm dia

f) 4x6mm2 + 2x2.5mm2 in 32mm dia

Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required (But with out MCB/ RCCB/ ISOLATOR) (Make- L&T/ Legrand/ Schneider/ ABB) a) Gr. Floor 12way double door (LDB)

b) 8way double door (PDB)

a) 1st. Floor 12way double door (LDB)

b) 8way double door (PDB)

Supply and fixing of 5amp to 32 amp rating 240V "B" series miniature circuit breaker suitable for lighting and other loads of the following poles in t he existing MCB DB ISI marked complete with connections testing and commissioning etc. as required. (Make- Legrand/ L&T/ Schneider) a) Gr. Floor 6Amp rating to 32Amp (SP) MCB

b) 40Amp (DP) MCB

c) 40Amp 4Pole MCB

a) 1st. Floor 6Amp rating to 32Amp (SP) MCB

b) 40Amp (DP) MCB

c) 40Amp 4Pole MCB

Supplying and fixing of call bell / buzzer ISI marked suitable for DC / AC single phase 230 volts complete as require. (Make- Cona / Anchor) Gr. Floor

1st Floor

S/F. of Modular blank plate.

S/F of 1200mm High speed Ceiling fan, Heavy Duty, Durable, Copper winding, Aluminium blade (ISI Mark) (Usha Striker/ / Cromton AURA/ Havells SPARK Deco/ Bajaj Elegance Ivory make) Orient Qusar ornamental. Rate Rs.2015.00 Fixing with all materials 320.00 2335.00 Gr. Floor

1st. Floor

S/F. of 5Step Modular electronic type Fan regulator of (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze). Gr. Floor

1st. Floor

S/F. of 1x18Wt. LED tube light fiting (Philips/ Havells/ Panasonic/ Crompton make). Gr. Floor

1st. Floor

S/F. of 15Wt. Surface/ Recess Circular down light LED fitting (Philips / Panasonic / Havels) make. Gr. Floor

1st Floor

S/F of 16Wt. 1' x 1' LED Ramp Light fittings (Philips / Panasonic / Havels) make. Gr. Floor

S/F of 45Wt. LED Street light fittings complete with G.I. Barcket (Philips/ Havells/ Panasonic/ Crompton make). Gr. Floor

1st Floor

Terrace Floor

S/F of 90Wt. LED Street light fittings complete with G.I. Barcket (Philips/ Havells/ Panasonic/ Crompton make). Gr. Floor

S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze). Gr. Floor

1st. Floor

S/F of 9Wt. LED lamp of reputed (Make: Philips/ Havels / Polycab) Gr. Floor

1st. Floor

S/F of 300mm Exhuast Fan of Usha/ Havells/ Bajaj make. Gr. Floor

1st. Floor

S/F of copper plate earthin (600x600x3.15mm) with running copper flat 25x5mm from copper plate to funnel of 40mm dia G.I Pipe including all accessories.

Supplying and laying 8SWG copper wires ISI marked at 0.5meter bellow ground level for conductor earth electrode including soldering etc as required.

SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF INDOOR PANNEL BOARD WITH DANGER BOARD. (S/F OF 125A. PANNEL BOARD 36"x24"x5") a) 16/18 SWG PANNEL BOX 30"x30"x5"= sq.inch for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space, hinges and other accessories, hinged door must be painted one coated red oxide and two coat enamel gray paint 4320sq.inch @1.51. b) Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand sinlge core cables duly crimped with copper lugs and all connections 36" x 24" including cost of copper conductor and other fittings like gasket, screw, nut and bolt, insulating materials etc. 864sq. inch@ 0.87. c) S/F of Bus bar (25x5)mm with required size of insulating materials nut & bolts.5mtr.@494 d) S/F of 125AMP. 4P 25kA MCCB of L&T / Siemens / Legrand make.1no.@9280e) S/F of DN4 Extended Rotary Handle. 1no.@3977f) S/F of Spreader Terminal DN0-100 - 4Pole. 1no.@408g) S/F of 63AMP. 4P 25kA MCCB of L&T / Siemens / Legrand make.1no@7,335.h) S/F of DN4 Extended Rotary Handle. 1no.@3,977S/F of Spreader Terminal DN0-100 - 4Pole. 1no.@408j) S/F of Ammeter with selector switch including all connections.1no.@1,398k) S/F of Voltmeter with selector switch including all connections.1no.@1,398l) S/F of indicator lamp with toggler switch and fuse.3nos.@242m) S/F of CT coil upto 400AMP. Including all connectios.3Nos.@860n) S/F of 40A. DP MCB make (L&T / Siemens / Legrand) 6nos.@803.o) S/F of 40A. 4P MCB make (L&T / Siemens / Legrand) 1nos.@1,591.p) S/F of 125A 4Pole change over switch make (L&T / Siemens / Legrand) 1no.9,290.

Supplying and fixing of Metal Box along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.

a) 250mm x 300mm x 100mm deep

S/F of 12mm thick rubber mate.

Supply of PVC Al. Armored cables ISI marked. (Make- Glowstar/ Polycab/ Nicco/ KEI as per Letter No- 309 19.01.2011 of SEEC (R&B) Odisha) a) 50sq.mm 3 1/2 core Gr. Floor

MV Cable laying exceeding 25sq.mm. to 120mm.sq. in ground Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1KV grade of size excedding 25sq.mm but not exceeding 120sq.mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

Cable laying on wall surface by clamping with Steel Shaddle.

Supplying and making end termination with brass compression gland & alluminium lugs for following size of PVC insulated cable. a) 3 & 1/2 x 50 sq. mm

S/F. of Inverter, UPS 2250VA (Make Microtech/Su-kam/Luminous) Gr. Floor

S/F of Inverter Battery 12V 150AH (Make Exide / Amrom / Su-karm / Luminous with 48 Month warranty). Gr. Floor

S/F. of Inverter Stand (Make Microtech/ Su-kam/ Luminous) Gr. Floor

S/F of Conventional lightining arrestor Supply of ISI marked 16mm, 1.5Mtr. Long, Copper L/A rod with 5Nos. Spike Rod.

Fixing Charges of L/A rod

Supply and laying 25mm x 5mm Copper strip on surface for connection as running conductor on Parapet connecting to the down conductors including all accessories.

S/F of 16 Sq.mm ISI marked FR PVC insulated (unseathed) single core copper conductor (Make- Polycab/ KEI).

Fixing of cable with all fixing materials.

S/F of 25mm dia (1") PVC pipe for wiring. (Make- AKJ/ KINJAL/ POLYCAB/ ANCHOR)

S/F of 1.5 Ton 3star rated Copper Split type A.C Machine (Make Hitachi/ Carrier/ Voltas).

Installation charges of Split type A.C. Machine.

S/F of 4 KVA (90V-270V) Voltage Stabilizer of V-Guard / Autotake / CG/ Microctek.

S/F of Extra Copper pipe for 1.5 Ton A.C Machine.

S/F of Installation of foam for copper pipe.

S/F of 15Amp Top.

S/F of Angle Stand.

S/F. of Fire Extinguisher ABC type of 6Kg.

Supply, Installation, Testing and commissioning ABC (Powder type) 6 Kg. Capacity Fire Extinguisher, Mild Steel Cylindres ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS: 1349-1993 as required as per specifications. (Fireshield/ Eversafe/ Safex/ Safeguard).