Sports Kerala Foundation Tender

od146406/2023_2024 : Design, fabrication and errection of acrylic box letters of 6mm and LED lighting fixed over existing ACP name board. The design, pattern, font and size should be as per the Engineer in charge of the work. The cost is inclusive of transportation, loading , fixing etc

od196407/2023_2024 : Supply of office cum reception table of size 1230 x 620 x 750 mm made of particle pressed wood of 18mm thickness. The table should have 2 drawers of size 350 x 320 x 150 mm and 2 compartments of size 350 x 320 x 540 mm. The table should have one drawer and one storage compartment on either sides. The drawers and compartments should have lock with 2 keys each. The table should also have a leg rest of size 450 x 150 x 18 mm.

od196467/2023_2024 : Supply of armed chair made of high quality fiber of height 800mm. The seat area should be of size 400 x 400mm and the back rest should be 400 x 400 mm.

25.7 : Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Alumini um sheets (each0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

od196468/2023_2024 : Supply of office chair of height 1000mm made of mild steel frame of 25mm circular pipe with one coat of primer and black enamel pipe. The chair should have seating cushion of size 400 x 550 mm and back rest of size 450 x 450 mm. The design of chair shalle be pre approved by the Engineer-in-charge of the work before supply.

od196406/2023_2024 : Design, supply and installation of High Definition vinyl printing stickers on glass surface including cleaning of the surface with suitable foam and drying of the same. The sticking should be in proper methods avoiding bubbles, bents etc. The design, color and font used for the print installed at site shall be pre-approved by the Engineer in charge of the work.

od146405/2023_2024 : Drawing and Painting Graffiti Art work on plastered wall surface with premium acrylic emulsion/ enamel or such suitable paint of appropriate colour and over priming coats as required including applying additional coats/touch ups wherever required to achieve harmonic appearance as directed by the engineer in charge including all cost and conveyance of materials labour charges all incidental charges including scaffolding etc complete.

Branding and associated work

od196469/2023_2024 : Supply of powder coated mild steel Almirah of size 830 x 420 x 1800 mm with 5 rows inside for storage, the doors needed to be fixed in 6 hinges. The Almirah should have a lock and key system with ISI mark and 1 spare key. The cost shall include transportation, loading and unloading charges.

100.98.1008 : Engaging Coolie

24.2 : Providing and fixing double scaffolding system (Cup lock type ) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube chakkus, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and / or pointing and / or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-Charge. Note: - ( 1) The evaluational area of the scaffolding shall be measured for payment purpose, (2) The payment will be made once only for execution of all items of such works.

od196408/2023_2024 : Supply of office cum reception table of size 1230 x 620 x 750 mm made of particle pressed wood of 18mm thickness. The table should have 1 drawer of size 450 x 320 x 150 mm and 1 compartments of size 450 x 320 x 540 mm. The table should have one drawer and one storage compartment on either sides. The drawer and compartment must have locks with 2 keys each. The table should also have a leg rest of size 600 x 150 x 18 mm.