Tenders of Southern Railway

Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm2 16867 With Available Items [refer Enclosure For The Approximate Weight And Material Composition].location-available At Mettu Line Behind Iow Office Goc Or Along The Side Of Gsd Goc Machine Siding Line Goc. Custodian-sse/diesel/goc.re-claimable Items [1] Wheel Set Complete [msu Tubes, Gear Wheel And Axle Boxes With Bearings]-6 Sets. [2] Lubricating Oil Cooler [ptloc] - 1no. S.1539 No.124441 Dt.01.10.2024. Note-[1] Delivery To Be Made On As Is Where Is And Lot Basis. [2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane,only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot.special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property. [8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery, Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean,free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12] The Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. (location: Mettu Line Behind Iow Office Goc Or Along The Side Of Gsd Goc Machine Siding Line Goc)

Monthly Basis Cab & Taxi Hiring Services - Suv; 2600 X 312; Outstation 24*7

P.l. No. 98413569 Condemned And Unserviceable Drained R.r. 606 Lube Oil. Note: (1) Purchaser Has To Arrange Their Own Containers / Tanker And Whole Pumping System For Taking Delivery [ As The Oil Is In Barrels]. (2) Water Decantation Is Permitted. (3) Cssd / Goc Electronic Weigh Bridge To Be Used For Weighment. (4) Special Attention Is Invited To Para 12.0 Of Instructions To Purchasers For Participating In E- Auction And Special Terms And Conditions Of Southern Railway And General Conditions Relating To The Auction Sale Of Railway Materials Through E- Auction. (5) Purchaser Should Submit Valid Pcb Certificate And Pass Book At The Time Of Delivery.

Procurement Of Square Body Fuse Link.

Tpj Division-modification Of Existing Feeding Post Iols By Provision Of Short Neutral Section Assemblies At Tj Tss

Led Indicator Light To Mount On Cls Panel

Description :autoclave Fully Automatic Vertical For Lab Use With Complete Set And Accessories 500mm X 300mm St ainless Steel With Trays - 2 Nos. (working Temperature - 110-130 Degree C). Keep Warm Temperature 45-60 Degree c Working Pressure - 15 To 22 Psl. The Above Equipment Should Have Calibration Certificate And Warranty Of Minimu m One Year. [ Warranty Period: 12 Months After The Date Of Delivery ] ]

Tape Cotton White 6 Mm Wide For Sealing

Set Of Items For Fixing Additional Speedometer Display

Cable Socket To Suit 150 Sqmm Cable, With Stud Hole Dia 16mm, Type-6 To Clw Specfication Clw/es/s-25/alt I