Tenders of Eastern Rly Hwh Div Sale Depot Stores

Condemned Structure Consisting Of Condemned Weigh Bridge And Fire Station, Total Qty- 01 By Lot. Above Mentioned Condemned Structure Are Offered Excluding Common Wall Of Adjacent Another Unit And Boundary Wall If Any Which Has Not Been Offered Or Sold . Therefore Such Type Of Cases Should Be Dealt With Proper Care During Dismantling So That Adjacent Unoffered And Unsold Unit Are Not Damage Or Broken In Any Way. Condition-1] The Sold Lot Will Be Handed Over To The Purchaser In Presence Of Concerned Custodian , Isa-sv, Rpf, Cdms And Other Personnel As The Case May Be , 2] Dismantling Work Of Sold Structure Is To Be Done By The Purchaser On His Own Arrangement By Providing Tools, Safety Gears, Machinery And Labour Required For The Purpose. 3] Purchaser Should Ensure To Keep A Safety Banner Around The Work Spot. 4] Any Loss / Damage That May Arise During Dismantling Work Due To Accident Etc, Shall Be The Sole Responsibility Of The Purchaser And No Claim On This Account Will Be Entertained By The Railways Under Any Circumstances, 5] Dismantling Of The Sold Lot Is Allowed Only Up To The Ground Level Of The Condemned Structures. 6] Dismantling Of The Condemned Structures [sold Lot] Will Take Place In Presence Of Engg. Officials. 7] Purchaser Shall Ensure That Dismantling Work Does Not Affect Or Endanger Safety Of Life And Railway Property In Near Vicinity.8] No Explosives Can Be Used For Demolishing, 9]if Any Loose Ferrous , Non-ferrous Or Machine Found Inside The Structure During Delivery , The Same Is Required To Be Handed Over To The Respective Custodian, 10] Custodian / Engg. Official Has To Ensure That Debris Arisen Out Of Dismantling To Be Cleared By Purchaser In Proportion Of Delivery Of Released Materials And He Will Invariably Certify In Sale Completion Report That All Debris/waste Etc. Generated Has Been Cleared By Purchaser And The Land Is Made Clean, Clear And Level For Further Use.

Sc. Cast Iron Brake Block. Condition-1] Materials Will Be Delivered On Weight Basis And Weighment Will Be Done On Electronic Weighing Machine Of Capacity 1 Ton In The Shed Premises Only, 2] Materials Will Be Sold On As Is Where Is Basis.

Rail 52 Kg (sc)

52 Kg Psc Sleeper (sc) With Mci Insert

Scrap Rail 52 Kg

1] Sc. Shaping Machine, M/c Code- N/372, Make- Na, Location- T&f Shop Bay 1, 2] Sc. Lathe Machine Code N/12, M/c Code- N/376, Make- Na, Location- T&f Shop Bay 2, 3] Sc. Boring Machine Code N/332, M/c Code- N/377, Make- Na, Location- T&f Shop Bay 2, 4] Sc. Air Reservoir, M/c Code- N/379, Make- Na, Location- Forge And Smithy Shop, 5] Sc. Bcnhl Roof Fixture Assembly , M/c Code- N/369, Make- Na, Location- Wagon Shop, 6] Sc. Shearing Machine, M/c Code- N/271, Make- Na, Location- Wagon Yard Side Near River, 7] Sc. Colm. Boom For Welding , M/c Code-262, Make- Na, Location- Girder Shop. Condition- 1. Pulley Train Arrangement, General Accessories & Any Other Loose Ferrous And Nonferrous Items Are Exclusive Of The Main Machine And Are Not Allowed For Lifting By The Purchaser. 2. Picking And Choosing Of Materials Near The Machine Is Not Allowed.3. Purchaser Has To Make His Own Arrangement For Lifting And Taking Delivery Of The Machine.4. Custodian May Allow Purchaser To Bring Crane If It Is Required And Justified.5. The Complete Machine Will Be Sold On "as Is Where As "basis.6. Machine Will Be Delivered As Per Nomenclature.7. Digging Is Allowed If Required And Justified For Delivery Purpose But The Railway Land Is To Be Leveled And Cleaned Before Taking Delivery Of The Sold Machine, 8. Cutting/dismantling Of Machine Is To Be Done In Such A Way So That No Adjacent Machine, Structure, Installation Or Machine Accessories Etc. Get Affected In Any Way.

52 Kg Rail(sc)

1] Sc. Straightening Machine, M/c Code- N/276, Make- Na, Location- Wagon Panel, 2] Sc. Straightening Machine, M/c Code- N/277, Make- Na, Location- Wagon Panel, 3] Sc. Shaping Machine, M/c Code- N/275, Make- Na, Location- Wagon Panel, 4] Sc. Shaping Machine, M/c Code- N/274, Make- Na, Location- Wagon Panel, 5] Sc. Shearing Machine, M/c Code- N/273, Make- Na, Location- Wagon Panel, 6] Sc. Welding Machine-05 Nos, M/c Code- 207, Make- Na, Location- Central Stores, 7] Sc. Welding Transformer-02 Nos, M/c Code- 210, Make- Na, Location- Central Stores, 8] Sc. Welding Rectifier-07 Nos, M/c Code- 204, Make- Na, Location- Central Stores, 9] Sc. Mmaw Machine, M/c Code- 87, Make- Na, Location- Central Stores, 10] Sc. Mmaw Machine, M/c Code- 88, Make- Na, Location- Central Stores, 11] Sc. Manual Arc Welding Machine-4 Nos, M/c Code- 100, Make- Na, Location- Central Stores, 12] Sc. Manual Arc Welding Machine With Accessories - 3nos, M/c Code- 102, Make- Na, Location- Central Stores, 13] Sc. Manual Arc Welding Machine - 1 No, M/c Code- 104, Make- Na, Location- Central Stores, 14] Sc. Portable Plasma Cutting Machine - 2 Nos, M/c Code- 105, Make- Na, Location- Central Stores, 15] Sc. Mig Torch - 3 Nos, M/c Code- 109, Make- Na, Location- Central Stores, 16] Sc. Mig Torch - 5 Nos, M/c Code- 110, Make- Na, Location- Central Stores, 17] Sc. Nose Equipment Hydraulic Hose And Unit - 6 Nos, M/c Code- 117, Make- Na, Location- Central Stores, 18] Sc. Pro Arc Welding And Cutting Parts - 2 Nos, M/c Code- 140, Make- Na, Location- Central Stores, 19] Sc. Mmaw Welding Machine- 1 No, M/c Code- 144, Make- Na, Location- Central Stores, 20] Sc. Plasma Cutting Machine- 2 Nos, M/c Code- 124, Make- Na, Location- Central Stores, 21] Sc. Sur-arc Transformer Welding Set- 1 No, M/c Code- 188, Make- Na, Location- Central Stores, 22] Sc. Sur-arc Transformer Welding Set, M/c Code- 189, Make- Na, Location- Central Stores, 23] Sc. Sur-arc Transformer Welding Set, M/c Code- 190, Make- Na, Location- Central Stores, 24] Sc. Weld Sets Overlinkon Advani, , M/c Code- 314, Make- Na, Location- Central Stores, 25] Sc. Airless Spray Painting Eot Type Dc , M/c Code- 7, Make- Na, Location- Wagon Shop, 26] Sc. Microscopes , M/c Code- N/226, Make- Na, Location- Wgn[w-1], 27] Sc. Instruments And Equipments , M/c Code- N/227, Make- Na, Location- Wgn[w-1], 28] Sc. High Intensity Illuminator , M/c Code- N/228, Make- Na, Location- Wgn[w-1], 29] Sc. Universal Testing Machine , M/c Code- 620, Make- Na, Location- Foundry [lab-t&f]. Condition- 1. Pulley Train Arrangement, General Accessories & Any Other Loose Ferrous And Nonferrous Items Are Exclusive Of The Main Machine And Are Not Allowed For Lifting By The Purchaser. 2. Picking And Choosing Of Materials Near The Machine Is Not Allowed.3. Purchaser Has To Make His Own Arrangement For Lifting And Taking Delivery Of The Machine.4. Custodian May Allow Purchaser To Bring Crane If It Is Required And Justified.5. The Complete Machine Will Be Sold On "as Is Where As "basis.6. Machine Will Be Delivered As Per Nomenclature.7. Digging Is Allowed If Required And Justified For Delivery Purpose But The Railway Land Is To Be Leveled And Cleaned Before Taking Delivery Of The Sold Machine, 8. Cutting/dismantling Of Machine Is To Be Done In Such A Way So That No Adjacent Machine, Structure, Installation Or Machine Accessories Etc. Get Affected In Any Way.

Sc. Semi Rusted Steel Turning . Condition-1] Materials Will Be Delivered On Weight Basis And Weighment Will Be Done On Electronic Weighing Scale Of Capacity 1000 Kg Available At Sorting Yard Depot, 2] Materials Will Be Sold On As Is Where Is Basis.

Surplus Diesel [alco] Locomotive No-16451 /wdm3a/hwh, Presently The Locomotive Is In Working Condition, Date Of Commissioning: 12.12.1992. Condition- 1] Currently The Loco Is In Working Condition, 2] Cutting And Dismantling Of The Locomotive Are Not Permitted, 3] Interested Buyers Are Requested To Inspect The Lot, Including Its Location And Condition, Before Placing Any Bids, 4] The Buyer Will Be Responsible For Arranging The Delivery Of The Locomotives Via Road Or Rail At His Own Risk And Cost, 5] If Delivery Is To Be Done By Rail, The Sr. Dme/diesel/hwh Will Prepare The Locomotive To Run On Rail , Any Repair Or Service Work Performed By The Railways, Will Be At The Purchaser¿s Expense, 6] The Date Of Handing Over The Locomotive To The Buyer Will Be Considered The Delivery Date, And The Locomotive Will Be Deemed Delivered At That Time, 7] Each And Every Cost For Moving The Locomotive To The Purchaser¿s Desired Location Will Be Borne By The Purchaser. Locomotive Will Be Made Track Worthy For Movement By Sr.dme(diesel)/er/hwh , 8] No Refund Claims Will Be Entertained After The Sale, 9] The Lot Will Be Sold On An "as Is Where Is" Basis, 10] Purchasers Shall Make Request For Fixing Delivery Program With Sr.dme(diesel)/er/hwh Only.