Tenders of Central Railway

Scrap Ms Mix Consisting Of Gear Case Embedded With Damber, Shock Absorber, Roller, Pins, Levers, Nut, Bolts, Plates, Shaft, Wire Rope, Coupler, Bracket, Beam Tool, Cylinder, Support Pipe, Grease Gun And Fire Bucket, Jack, Regulator, Drager Drum, Socket, T Tools, Bearing, Ms Sheets, Boxes, Coil Spring, Grab Handle, Rods, Brackets, Ms Rings, Channels, Brake Block Hangers, Brake Shoe ,foot Steps, Lower Spring Beam, Spring , Rack Handle, Valve, Ms Cut Plates, Cut Pieces Of Coil Springs, And Other Similar Type Of Items, Misc Fittings Released From Coaches, Loco , Emu And Other Ms With Or Without Nf And Other Attachments. Location-a By 1 , A By 2, C By1

Scrap Ci Brake Block Of Sort And Sizes With Or Without Ms Attachments.

Provision Of Additional Grab Handle In Entry Of Door In Siemens Rake At Kurla Carshed Qty- 1210 Doorway (qty For 27 Rake).

Oil Cooling Radiator

High Speed Steel Saw Blades Or Hand Hacksaw Blades (type A) Size 350 X 32 X 1.6 X 4.0 ( Size 350 +/-2 Mm Nominal Length ( L ) X 32 +/- 1 Mm Width (a) X 1.60 +/- 0.1 Mm Thick (b), 4 +/- 6% Mm Pitch, 6 Teeth Per Inch) And Shall Be According To Designation Xt87w6mo5cr4v2 Of Is : 7291-1981 Or Latest. Workmanship And Finish-blades Shall Be Free From Burrs, Rust, Scale And Other Defects. The Hardness When Measured As Near To The Tip Of The Teeth As Possible Shall Be In The Range Of 850 Hv To 900 Hv And The Hardness Around Pin Holes Shall Be In Between 400 To 500hv.

M.s Flats 45 X 6 Mm Conforming To Is:2062/99

Set Of Rubber O Ring

(mvb Item) (n) Description :- Denoting No.- G 506 B, Free Travelling Authority Book, In Size: 8.5 Inch X 8 Inch, (books) With 100 Lvs. Having One Side Print On 58 Gsm Ir Logo White Water Mark Security Paper In Black Ink. Printing Instructions: : Printing With Raw Material. Text Matter With One Side Printing In Bilingual (hindi And English) Text Matter Printing In Black Colour Ink Numbering To Be Machine Serial Numbered On Right Top Corner (in Duplicate On Same Page I.e. On 02 Counter Foils) In 6 Digits And As Per Serial Number Allotted. In No Case The Number Shall Be Printed On Dot Matrix/inkjet Or Laser Jet Printers. Raw Material:- For Text Printing Over 58 Gsm Ir Logo White Water Mark Security Paper Conforming To Is 1848/2007 As Amended Up To 2018 For Cover Page Kraft Paper 130 Gsm Conforming To Is 1397/90 Or Latest Grade- Ii Binding Specifications: 100 Leaves (in Duplicate On Same Page) Limp Bound With Two Side Pins On Left Side Of Cover Page. One Seal Pin On Right Bottom Corner Supply Should Be In A Bundle Of 20 Nos. Each With Strapping. Numbering Instructions: The Commencing No. Is To Be Obtained From Amm (sty) By. Manuscripts To Be Get Approved From Amm (sty)/ By.

Dropper Clip For 242 Sq Mm Catenary

CATEGORY: Arterial Blood Gas Analyzer (V2) (Q2)