Tenders of South Eastern Railway in West Bengal

Set Of Gasket And Grommet For Auxiliary Motors. (1) Duct Gasket For Mvsi As Per Kgp Drg. No. Se/kgp/el-528, Qty=02 Nos. /set. (2) Rubber Grommet For Mvsi/mvsl As Per Kgp Drg. No. Se/kgp/el-532, Qty=04 Nos. /set. Note: (1) Manufacturing Date Should Be Marked On Each Gasket. (2) One Advance Sample Got To Be Approved By Consignee Before Bulk Supply.

Crew Fan For Wag-9 Locos

Lot No.divn/nmp/40/11/24-25/bg/cond./8w/wgn. Description- Iron And Steel Scrap Cutup Parts Of Bg Cond./8w/wgn. Without Contents If Any. 1) Se 10079462890 Boxnm1 (nlb) 2) Sc 30098962072 Bcnm1 (nlb) 3) Sr 30068861503 Bcnm1 (nlb) 4) Nf 30058962067 Bcnm1 (nlb) 5) Nf 30058963231 Bcnm1 (nlb) 6) Cr 30018867456 Bcnm1 (nlb) 7) Er 30028968075 Bcnm1 (nlb) 8) Nr 30038960182 Bcnm1 (nlb) 9) Se 30078960302 Bcnm1 (wm) 10) Nfr 30058962760 Bcnm1 (wm) Nb: (1): I) Wagons Are To Be Sold Without 16 Nos. Nlb Trolleys Against Srl. No. 01 And 08. Ii) Wagons Are To Be Sold With 04 Nos Wm Trolleys Against Srl No. 09 And 10. Iii) All Wagons To Be Sold Without 40 Nos. Wheel Sets With Ctrb, Brake Cylinder Complete, Brake Gear Complete, Hand Brake Set Complete With Connecting Link, Bush, Seam Less Pipe With Fitting For Air Brake Equipment, Distributor Valve, Apm Valve, Sab, Coupler Body With Shank Wear Plate, Knuckle, Knuckle Pivot Pin, Coupler Yoke, Yoke Pin, Yoke Pin Support With Wear Plate, High Capacity Draft Gear With Draft Gear Follower, Etc And Other Excluded Fitting As Per Latest Excluded Fitting List * *excluded Fitting List Letter No. M2/c-19/e.ftg/ 1302 Dt.25.10.2023, Nb(2): Special Condition For Rolling Stock- A) All Excluded Fitting Along With Nlb Trolleys Are To Be Handed Over By The Purchaser To Sse/c&w/nmp At (nimpura) And Wheel Sets To Sse/44/nws/kgp Respectively Nominated Location Suggested By The Concerned Sse Respectively For Which They Have To Arrange Labour,tools & Equipment For Loading Of The Excluded Items From Cutting Site And Then Transport It To Nominated Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Materials By Their Own Arrangement Including Labour And Hand Over The Same To Concern Stock Holder With Clear Acknowledgement. (b) The Excluded Fittings Should Be Kept Away From The Cutting Lines And Adjacent Areas So That Future Grounding Of Rolling Stock Is Not Hampered In Any Way. The Delivery Of Cut Pieces Of Last 10 Percent Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. (c) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register. "purchaser Has Cleared All Nil Value Item Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site. (d) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolleys/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. (e)the Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In Near Vicinity Of The Cutting Spot/ Loading Point And Unloading Point Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery, And Also He Will Be Solely Responsible Of Any Loss Applied (railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Transportation Loading And Unloading Of All Excluded Fittings Of The Wagons. Including Wheel Sets And Trolleys. Nb- (3) The Firm Shall Follow All Rules Regarding The Loading Of Vehicle As Per Rto/statuary Body Governed Time To Time. Railway Will Not Be Responsible Any Breach Of Rule During Loading /transportation Done By The Purchaser. Nb: (4) Delivery Will Be Given In Numbers.

Open Well Mono Block (horizontal Type) Submersible Pump Set

Set Of Programme Switches Consisting Of- -(1) Zcpa To Siemens New Order No.- 250-2yw-005wzcpa =1no. & (2) Hchba To Siemens New Order No.- 250-2yw-005whchba = 1no. As Per Clw's Spec. No.- Clw/es/s- 1(alt- Zb) For Cpa & Battery Charger.

Drain Cock Assembly For Auxiliary Reservoir (200 Litres). Drawing No. : Rdso's Drg. No. Sketch-98003, Alt. Nil, Item Nos.1 To 13 In Assembled Condition. Material And Specification : As Per Drawing.

Arc Chute Assly. Complete Etc.

Lot No.divn/mn/26/09/24-25/bg/cond./8w/wgn, Description- Iron And Steel Scrap Cutup Parts Of Bg Cond./8w/wgn. Without Contents If Any. 1) Se 72079801406 Bobrnm1 (nlb) 2) Se 30079365298 Bcnam1 (nlb) 3) Nf 30059260834 Bcnam1 (nlb) 4) Se 10079665567 Boxnm1 (nlb) 5) Sc 10099660351 Boxnm1 (nlb) 6) Se 10079756586 Boxnm1 (nlb) 7) Se 30079365663 Bcnam1 (wm) 8) Wr 10089560197 Boxnm1 (wm) 9) Er 30029026538 Bcnm1 (wm & Nlb) Nb: (1): I) Wagons Are To Be Sold Without 13 Nos. Nlb Trolleys And Nl Trolleys Against Srl. No. 01 To 06 And 09-01 No. Ii) Wagons Are To Be Sold With 05 Nos Wm Trolleys Against Srl No. 07 To 08 And 09-01 No. Iii) All Wagons To Be Sold Without 36 Nos. Wheel Sets With Ctrb, Brake Cylinder Complete, Brake Gear Complete, Hand Brake Set Complete With Connecting Link, Bush, Seam Less Pipe With Fitting For Air Brake Equipment, Distributor Valve, Apm Valve, Sab, Coupler Body With Shank Wear Plate, Knuckle, Knuckle Pivot Pin, Coupler Yoke, Yoke Pin, Yoke Pin Support With Wear Plate, High Capacity Draft Gear With Draft Gear Follower, Etc And Other Excluded Fitting As Per Latest Excluded Fitting List **excluded Fitting List Letter No. M2/c-19/e.ftg/ 1302 Dt.25.10.2023, Nb(2): Special Condition For Rolling Stock- A) All Excluded Fittings Are To Be Handed Over To Sse/w-yard/nws, Trolleys To Sse/38/nws And Wheel Sets To Sse/44/nws Respectively For Which They Have To Arrange Labour,tools & Equipment For Loading Of The Excluded Fittings From Cutting Site And Then Transport It To Nominated Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Fittings By Their Own Arrangement Including Labour And Hand Over The Same To Concern Stock Holder With Clear Acknowledgement. (b) The Excluded Fittings Should Be Kept Away From The Cutting Lines And Adjacent Areas So That Future Grounding Of Rolling Stock Is Not Hampered In Any Way. The Delivery Of Cut Pieces Of Last 10 Persent Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. (c) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register. "purchaser Has Cleared All Nil Value Item Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site. (d) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolleys/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. (e)the Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In Near Vicinity Of The Cutting Spot/ Loading Point And Unloading Point Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery, And Also He Will Be Solely Responsible Of Any Loss Applied (railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Transportation Loading And Unloading Of All Excluded Fittings Of The Wagons. Including Wheel Sets And Trolleys. Nb: (3) Delivery Will Be Given In Numbers.

Lot No.ws/s-yd/43/11/24-25/bg/cond./8w/wgn. Description- Iron And Steel Scrap Cutup Parts Of Bg Cond./8w/wgn. Without Contents If Any. 1) Se 55079160384 Brn (nlb) 2) Se 55079186490 Brna (nlb) 3) Se 55079160391 Brn (nlb) 4) Se 99079306731 Brn (nlb) 5) Se 55079160308 Brn (nlb) 6) Er 55029060146 Brn (wm) 7) Se 55079160421 Brn (wm) Nb: (1): I) Wagons Are To Be Sold Without 10 Nos. Nlb Trolleys Against Srl. No. 01 To 05. Ii) Wagon Are To Be Sold With 04 Nos Wm Trolleys Against Srl No .06 & 07 Iii) All Wagons To Be Sold Without 28 Nos. Wheel Sets With Ctrb, Brake Cylinder Complete, Brake Gear Complete, Hand Brake Set Complete With Connecting Link, Bush, Seam Less Pipe With Fitting For Air Brake Equipment, Distributor Valve, Apm Valve, Sab, Coupler Body With Shank Wear Plate, Knuckle, Knuckle Pivot Pin, Coupler Yoke, Yoke Pin, Yoke Pin Support With Wear Plate, High Capacity Draft Gear With Draft Gear Follower, Etc And Other Excluded Fitting As Per Latest Excluded Fitting List **excluded Fitting List Letter No. M2/c-19/e.ftg/ 1302 Dt.25.10.2023, Nb(2): Special Condition For Rolling Stock- A) All Excluded Materials Including Wheel Sets And Nlb Trolleys Are To Be Handed Over By The Purchaser At Sse/44 & 38/nws The Nominated Location Suggested By The Concerned Sse For Which They Have To Arrange Labour, Tools & Equipment For Loading Of The Excluded Items From Cutting Site And Then Transport It To Nominated Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Materials By Their Own Arrangement Including Labour And Hand Over The Same To Concern Stock Holder With Clear Acknowledgement. (b) The Excluded Fittings Should Be Kept Away From The Cutting Lines And Adjacent Areas So That Future Grounding Of Rolling Stock Is Not Hampered In Any Way. The Delivery Of Cut Pieces Of Last 10 Present Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. (c) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register. "purchaser Has Cleared All Nil Value Item Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site. (d) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolleys/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. (e)the Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In Near Vicinity Of The Cutting Spot/ Loading Point And Unloading Point Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery, And Also He Will Be Solely Responsible Of Any Loss Applied (railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Transportation Loading And Unloading Of All Excluded Fittings Of The Wagons. Including Wheel Sets And Trolleys. Nb: (3). The Firm Shall Follow All Rules Regarding The Loading Of Vehicle As Per Rto /statuary Bodies Governed Time To Time. Railway Will Not Be Responsible Any Breach Of Rules During Loading / Transportation Done By The Purchaser. Nb: (4) Delivery Will Be Given In Numbers.

Lot No.m/stb/adme/nmp/08/24-25/20, Description- Scrap Steel Turning Boring (stb) . Materials To Be Sold "as Is Where Is Basis". Loading Will Be Commance From West End Side. Special Conditions For Lot No: M/stb/adme/nmp/08/24-25/20 1. The Bidders Must Inspect The Location Of Steel Turning And Boring As Mentioned In Lot Details And Satisfy Themselves On All Points Before Submitting Their Bids. The Bidders Are Advised To Point Out Discrepancy, If Any, Well Before Start Of Bidding Process. Once The Bid Is Submitted, No Claims In Respect Of Quality/quantity, Location, Description And Delivery Of Materials, Special Request Etc. Shall Be Entertained. 2. Delivery Should Commence From West End Side, Pick And Choosing Will Not Be Allowed. Delivery Witnessing Official Will Ensure The Same. 3. Safety Of Purchaser Staff And Railway Property: Purchaser Will Arrange To Provide Safety Gears To His Engaged Worker And Abide By All Relevant Regulations. Any Injury /death / Accident Caused During Delivery Of Scrap Will Be On Purchaser's Account. No Railway Property Shall Be Damaged In Course Of Delivery. If Any Damage Is Sustained To Railway Property, Proportionate Loss Value Will Be Recovered From Purchaser. 4. Weighment Of Truck: The Empty Truck Will Be Weighed On Calibrated Working Electronic Weighbridge Only At Amm/s-yard /kgp In Presence Of Delivery Witnessing Official. The Nominal Payment On Private Weighbridge Will Be Paid By Purchaser. After Loading Of Steel Turning And Boring, Final Weighment Will Be Taken On The Same Weighbridge In Presence Of Delivery Witnessing Official. 5. At The Time Of Loading The Stock Holder Concerned Reserves Himself The Right To Determine How Near To A Lot Purchaser's Vehicles May Be Parked For The Purpose Of Loading; Purchaser Must Ascertain This At The Time Of Inspection Of Materials. 6. The Purchaser Will Solely Be Responsible For The Payment Of Any Compensation For Injury Or Death Caused To The Labor Employed By Him For Cutting/loading/removal Etc. Of The Purchases In Accordance With The Govt. Laws. The Railway Administration Will Have Nothing To Do In This Concern. The Contractor Shall Be Liable For All Material Or Works Spoiled Or Damaged By His Men And He Shall Pay The Cost Of Any Damage Done To The Property Of The Railway Administration While Performing This Contract And He Shall Personally Be Responsible For Any Unsatisfactory Work Or Any Detention Caused To The Railway Works Or To Train, Through The Negligence Of His Men For Which He Will Accept Any Penalty That May Be Inflicted By The Railway Administration. 7. Delivery Program And Witnessing Of Delivery: Delivery Program And Co-ordination For Delivery Witnessing Official Will Be Made By Stock Holder. The Delivery Of Stb Will Be Witnessed By Sr.isa/sv, Pc/rpf (preferably Of Inspector Rank), Stock Holder(s). 8. The Delivery Of The Materials Will Be Given On Weighment Basis. 9. No Sale Delivery Will Be Given On Gazetted Holidays Or Other Holidays Observed By The Depot/division/workshop. [continued In Special Conditions...]