Paschim Bardhaman Tenders

Core Drill, Morse Taper Shank - Is 5366

CATEGORY: GI Wire (Signalling Wire) , 8 SWG as per IS: 280-2006 , Bobbin Insulator, Size 2 Inch for Haulage Signalling system , MS Bolts with Nut, 3/8 INCH x 3 INCH

Scrap Condemned Electric Loco No. 23321/wag5/taochi/asn As Is Where Is Basis . The Loco Will Be Sold Without Following Excluded Fittings (i) Wheel Sets With Axle- 06 Nos, (ii) Axle Boxes- 12 Nos , (iii) Bull Gear- 06 Nos . Condition- 1.the Purchaser Should Visit The Condemned Loco As Well As Its Actual Location Before Bidding, 2. Details Of Serviceable Items Which Have Been Removed From The Condemned Loco Have Been Uploaded As Image In Lot Details Page And Is Also Available With The Custodian,,3. The Scrap Loco Is Sold On As Is Where Is Basis Therefore Railways Does Not Guarantee For Quality Or Quantity As Per Description Etc. And Railways Is Not Responsible For Any Type Of Shortage During Delivery, 4.dismantling And Cutting Is Permitted For Loading And Delivery Purpose, 5. The Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles/vehicle And Necessary Trained Men For Cutting And Dismantling The Components Of The Condemned Loco As Per Requirements, 6. The Purchaser Is Required To Stack All The Reclaimable/excluded Items At One Location Well Away From The Cut Up Parts Of The Locos And It Is Required To Be Returned To The Custodian Before Affecting The Delivery. Purchaser Should Take Adequate Precaution During Dismantling Of Excluded Fittings Item So That The Same Can Be Return Over To The Custodian In A Sound, Undamaged And Intact Condition Otherwise Railway Reserve The Right To Recover The Amount Against Damaged Item Prior To The Delivery, 7. The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In The Near Vicinity Of Cutting Spot Are Damaged In Any Way. The Purchaser Will Be Held Responsible For Any Damage/fire Accident To The Railway Property Caused During Cutting Operation Or Delivery, 8. It Is The Responsibility Of The Purchaser To Segregate And Remove The Unwanted And Leftover Scrap Before Completion Of Delivery Of Loco. Purchaser Has Also To Keep The Cutting And Loading Spot Neat And Clean, Otherwise He May Be Penalized By The Railway, 9. The Purchaser Has To Comply All The Rules And Regulation Of Pollution Control Board Prevailing/existing In The Cutting Spot During Cutting And Dismantling Operation Of Condemned Loco, 10. The Purchaser Should Be Aware Of The Fact That Total Wt. Shown Against Heading [lot Wt. In Mt] In Lot Details Page Under Ireps Portal Is Indicative Only Against This Lot And Purchaser Should Note That During Delivery Of The Lot, The Above [lot Wt. In Mt] In Lot Details Page Is Not To Be Taken Into Consideration, 11. Bidders Are Required To Check The Detailed Conditions And Amendments / Modifications If Any, In Special Condition And In Depot Condition Against Each Lot Online For The Lot/catalogue Published For E-auction Purpose Before Bidding. Before Bidding Bidders Are Also Advised To Inspect And Tally Every Details Of The Lot Including Description, Location, Quantity, State, Hsn Code, Gst Percentage Etc With The Actual Material On Ground As Per Offer Kept With The Custodian And If Any Discrepancies Is Found, It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office For Further Action. No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale, 12. Gst, Actual Tcs And Other Taxes Will Be Calculated At The Time Of Preparation Of Challan For Final Deposition Of Bsv. 13.ground Rent Is To Be Imposed @ 0.5 ( Half)% Of The Value Of The Materials Yet To Be Lifted Per Day Or Part Of A Day Before Initiating Delivery Of The Remaining Un-lifted Materials In Case Of Failure To Lift The Entire Sold Materials Due To The Fault Of The Purchaser's Own Within The Stipulated Free Time Period.

Scrap Condemned Electric Loco No. 23317/wag5/taochi/asn As Is Where Is Basis . The Loco Will Be Sold Without Following Excluded Fittings (i) Wheel Sets With Axle- 06 Nos, (ii) Axle Boxes- 12 Nos , (iii) Bull Gear- 06 Nos . Condition- 1.the Purchaser Should Visit The Condemned Loco As Well As Its Actual Location Before Bidding, 2. Details Of Serviceable Items Which Have Been Removed From The Condemned Loco Have Been Uploaded As Image In Lot Details Page And Is Also Available With The Custodian,,3. The Scrap Loco Is Sold On As Is Where Is Basis Therefore Railways Does Not Guarantee For Quality Or Quantity As Per Description Etc. And Railways Is Not Responsible For Any Type Of Shortage During Delivery, 4.dismantling And Cutting Is Permitted For Loading And Delivery Purpose, 5. The Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles/vehicle And Necessary Trained Men For Cutting And Dismantling The Components Of The Condemned Loco As Per Requirements, 6. The Purchaser Is Required To Stack All The Reclaimable/excluded Items At One Location Well Away From The Cut Up Parts Of The Locos And It Is Required To Be Returned To The Custodian Before Affecting The Delivery. Purchaser Should Take Adequate Precaution During Dismantling Of Excluded Fittings Item So That The Same Can Be Return Over To The Custodian In A Sound, Undamaged And Intact Condition Otherwise Railway Reserve The Right To Recover The Amount Against Damaged Item Prior To The Delivery, 7. The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In The Near Vicinity Of Cutting Spot Are Damaged In Any Way. The Purchaser Will Be Held Responsible For Any Damage/fire Accident To The Railway Property Caused During Cutting Operation Or Delivery, 8. It Is The Responsibility Of The Purchaser To Segregate And Remove The Unwanted And Leftover Scrap Before Completion Of Delivery Of Loco. Purchaser Has Also To Keep The Cutting And Loading Spot Neat And Clean, Otherwise He May Be Penalized By The Railway, 9. The Purchaser Has To Comply All The Rules And Regulation Of Pollution Control Board Prevailing/existing In The Cutting Spot During Cutting And Dismantling Operation Of Condemned Loco, 10. The Purchaser Should Be Aware Of The Fact That Total Wt. Shown Against Heading [lot Wt. In Mt] In Lot Details Page Under Ireps Portal Is Indicative Only Against This Lot And Purchaser Should Note That During Delivery Of The Lot, The Above [lot Wt. In Mt] In Lot Details Page Is Not To Be Taken Into Consideration, 11. Bidders Are Required To Check The Detailed Conditions And Amendments / Modifications If Any, In Special Condition And In Depot Condition Against Each Lot Online For The Lot/catalogue Published For E-auction Purpose Before Bidding. Before Bidding Bidders Are Also Advised To Inspect And Tally Every Details Of The Lot Including Description, Location, Quantity, State, Hsn Code, Gst Percentage Etc With The Actual Material On Ground As Per Offer Kept With The Custodian And If Any Discrepancies Is Found, It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office For Further Action. No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale, 12. Gst, Actual Tcs And Other Taxes Will Be Calculated At The Time Of Preparation Of Challan For Final Deposition Of Bsv. 13.ground Rent Is To Be Imposed @ 0.5 ( Half)% Of The Value Of The Materials Yet To Be Lifted Per Day Or Part Of A Day Before Initiating Delivery Of The Remaining Un-lifted Materials In Case Of Failure To Lift The Entire Sold Materials Due To The Fault Of The Purchaser's Own Within The Stipulated Free Time Period.

Installation Of Solar Submersible At Sansad Two Under Gourbazar Gp.

Cap Alfacalcidol 0.25 Mcg

Comprehensive Maintenance Contract For Up Keeping, Civil And Horticulture Services Of Office And Service Buildings For Two Years 2025-2027 At Cmpdi Ri-i, Asansol

Construction Of Shed At Madanpur Koboristan Under Punchra G.p Barabani Block In The District Of Paschim Bardhaman. 3rd Call

Const Of Leachpit With Drain From Bablu Pal To Manik Mondal House

Supply Of Underwater Thrusters With Matching Connectors