Vehicle Tenders

Description: CATEGORY: Fabricated Special Purpose Vehicle on Truck/Van (Q3)

Description: CATEGORY: INTEGRATED SECURITY SURVEILLANCE SYSTEM SERVICE - T Prevention, Employee Safety, Event Video Surveillance, Pub Safety, Outdoor Perimeter Security, Vehicle Management, V Management; eSATA; Maximum security footage; Buyer’s premises; NA; N..

Description: 12128ms25c, 98050011, Quantity- 66.645 Mts. Scrap Condemned Unserviceable Ms Silent Blocks, Spheri Blocks, Centre Pivot Silent Blocks Of Carriage And Wagon And Locos Of Sorts And Sizes, With Or Without Attachments Of Rubber, Fiber And Nylon Bushes. Location- Bin No- 128, Right Side Of Road No- 1. Hsn Code- 72044900. Gst- 18 Percent Note: Delivery On Actual Weighment Basis Only. Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery As Per Motor Vehicle Act 1988.

Description: CATEGORY: Lead Acid Batteries for Motor Vehicles with Light Weight and High Cranking Performance as per IS 14257:2019 , Factory charged batteries for motor vehicles 12 V 180 AH capacity

Description: Request For Proposal For A Comprehensive Smart Solution For Mine Digitalization And Real-time Monitoring Of Vehicles For Gmdc Umarsar Mine.

Description: CATEGORY: WRECKER CRANE 5 TON CAPACITY (TOWING VEHICLE)

Description: Lot No.ws/ayma/29/06/25-26/bg/cond./8w/wgn. Description- Iron And Steel Scrap Cutup Parts Of Bg Cond/8w/wgn. Without Contents If Any. 1) Ecr 22100979130 Boxnhl (nlb) Steel Body. 2) Ecr 56100857976 Brnahs (nlb) 3) Se 18079460236 Boyel (nlb) 4) Wr 55080140825 Brn (wm) 5) Sec 94141347582 Brn (wm) Steel Body. 6) Se 56070511380 Brnahs (wm) 7) Se 56070510178 Brnahs(wm) Nb: (1): I) Wagons Are To Be Sold Without 06 Nos. Nlb Trolleys Against Srl. No. 01 To 03. Ii) Wagon To Be Sold With 08 Nos. Wm Trolley Against Srl No. 04 To 07. Iii) Wagon Serial No. 01 To 07 To Be Sold Without 28 Nos. Wheel Sets With Ctrb, Brake Cylinder Complete, Brake Gear Complete, Hand Brake Set Complete With Connecting Link, Bush, Seam Less Pipe With Fitting For Air Brake Equipment, Distributor Valve, Apm Valve, Sab, Coupler Body With Shank Wear Plate, Knuckle, Knuckle Pivot Pin, Coupler Yoke, Yoke Pin, Yoke Pin Support With Wear Plate, High Capacity Draft Gear With Draft Gear Follower Etc And Other Excluded Fitting As Per Latest Excluded Fitting List. **excluded Fittings List Letter No. M2/c-19/e.ftg/ 1302 Dt.25.10.2023, Nb(2): Special Condition For Rolling Stock- A) All Excluded Materials Including Wheel Sets And Nlb Trolleys Are To Be Handed Over By The Purchaser At The Nominated Location Suggested By The Concerned Sse For Which They Have To Arrange Labour, Tools & Equipment For Loading Of The Excluded Items From Cutting Site And Then Transport It To Nominated Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Materials By Their Own Arrangement Including Labour And Hand Over The Same To Concern Stock Holder With Clear Acknowledgement. (b) The Excluded Fittings Should Be Kept Away From The Cutting Lines And Adjacent Areas So That Future Grounding Of Rolling Stock Is Not Hampered In Any Way. The Delivery Of Cut Pieces Of Last 10 Present Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. (c) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register. "purchaser Has Cleared All Nil Value Item Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site. (d) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolleys/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. (e)the Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In Near Vicinity Of The Cutting Spot/ Loading Point And Unloading Point Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery, And Also He Will Be Solely Responsible Of Any Loss Applied (railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Transportation Loading And Unloading Of All Excluded Fittings Of The Wagons. Including Wheel Sets And Trolleys. Nb: (3) Delivery Will Be Given In Numbers.

Description: Scrap Us Various Types Of Coal Lumps And Coal Powder Obtain From Floor Cleaning Of Wagons Of Sorts And Sizes. Coal Comprises Sand, Stone If Any Cond. 1. Loading By Purchaser 2. Delivery In Only Rto Registered Vehicles Location:- Open Area In Front Of Power Shop/workshop Bikaner

Description: Lot No.m/stb/nmp/06/25-26/10. Description- Scrap Steel Turning Boring (stb). Materials To Be Sold "as Is Where Is Basis". Special Conditions - 1. The Bidders Must Inspect The Location Of Steel Turning And Boring As Mentioned In Lot Details And Satisfy Themselves On All Points Before Submitting Their Bids. The Bidders Are Advised To Point Out Discrepancy, If Any, Well Before Start Of Bidding Process. Once The Bid Is Submitted, No Claims In Respect Of Quality/quantity, Location, Description And Delivery Of Materials, Special Request Etc. Shall Be Entertained. 2. Delivery Should Commence From Wagon Depot/nimpura Pick And Choosing Will Not Be Allowed. Delivery Witnessing Official Will Ensure The Same. 3. Safety Of Purchaser Staff And Railway Property: Purchaser Will Arrange To Provide Safety Gears To His Engaged Worker And Abide By All Relevant Regulations. Any Injury /death / Accident Caused During Delivery Of Scrap Will Be On Purchaser's Account. No Railway Property Shall Be Damaged In Course Of Delivery. If Any Damage Is Sustained To Railway Property, Proportionate Loss Value Will Be Recovered From Purchaser. 4. Weighment Of Truck: The Empty Truck Will Be Weighed On Calibrated Working Electronic Weigh Bridge Only At Amm/s-yard/mkt/kgp In Presence Of Delivery Witnessing Official. The Nominal Payment On Private Weigh Bridge Will Be Paid By Purchaser. After Loading Of Steel Turning And Boring, Final Weighment Will Be Taken On The Same Weigh Bridge In Presence Of Delivery Witnessing Official. 5. At The Time Of Loading The Stock Holder (sse/c&w/nmp) Concerned Reserves Himself The Right To Determine How Near To A Lot Purchaser's Vehicles May Be Parked For The Purpose Of Loading, Purchaser Must Ascertain This At The Time Of Inspection Of Materials. 6. The Purchaser Will Solely Be Responsible For The Payment Of Any Compensation For Injury Or Death Caused To The Labor Employed By Him For Cutting/loading/removal Etc. Of The Purchases In Accordance With The Govt. Laws. The Railway Administration Will Have Nothing To Do In This Concern. The Contractor Shall Be Liable For All Material Or Works Spoiled Or Damaged By His Men And He Shall Pay The Cost Of Any Damage Done To The Property Of The Railway Administration While Performing This Contract And He Shall Personally Be Responsible For Any Unsatisfactory Work Or Any Detention Caused To The Railway Works Or To Train, Through The Negligence Of His Men For Which He Will Accept Any Penalty That May Be Inflicted By The Railway Administration. 7.delivery Program And Witnessing Of Delivery: Delivery Program And Co-ordination For Delivery Witnessing Official Will Be Made By Stock Holder (sse/c&w/nmp). The Delivery Of Stb Will Be Witnessed By Sr.isa/sv, Pc/rpf (preferably Of Inspector Rank), Stock Holder (sse/c&w/nmp). 8. The Delivery Of The Materials Will Be Given On Weighment Basis. 9. No Sale Delivery Will Be Given On Gazetted Holidays Or Other Holidays Observed By The Depot/division/workshop. [continued In Special Conditions...]

Description: CATEGORY: Uparmouring or Bullet Proofing of ISUZU Vehicle