Vehicle Tenders

Details: Hiring Of Vehicles On Outsource Basis For Use Of Officers In The Department Of Animal Husbandry And Veterinary Services For The Year 2024-25

Details: License for Supply, Installation, Testing, Commissioning, Operation and Maintenance of Electric Vehicles (EV) Charging Station at Kadapa Airport

Description: CATEGORY: Ellen Key Set , File Flat Smooth 12 inch , File Flat 12 inch , Flat File 12 inch For Tyre Tube Repair , File Half Round 12 inch , Oil Can , Hammer 250 GrM , Hammer 500 GrM , Hammer Cross Pin 100 Gms and 250 Gms , Hammer 03 Kg , Screw Driver 4 inch , Screw Driver 6 inch , Screw Driver 2 in 1 , Screw Driver Kit Auto Electrician , Screw Driver Big 12 inch , Tool Box Lock with Key , Oil Filter Wrench For all Types of Vehicles , Filler Gauge 0.05 mm To 01 mm , Socket Set with Rods 8 mm to 32 mm Socket with Complete Attachments , Adjustable Wrench 300 mm , Centre Punch 150 mm , Creepers , Socket Clutch Nut Motor Cycle TVS , Tappet Adjuster Motor Cycle TVS , Clutch Holder Motor Cycle TVS , Open Ring Spanner Brake Motor Cycle TVS , Hydrometer , Battery Quick Charger with Accessories and Stand ELAK FC 30 24 , Insulation Rubber Sheet for Table and Ground , Digital Multi Meter with AC DC Amp Tester , Hand Saw Size 15 inch and 18 inch Arie , Pincer Jamour , Bosch GH06500 Electric Planner , Wooden Chisel Size 1 inch , Bosch GWS 600 Angel Grinder , TRI Square 06 inch and 12 inch , Iron Planer 07 inch 10 inch and 14 inch , Drill Bit Set , Combination Cutting Pliers 8 inch , Tyre Lever Set H D , Air Pipe Line Nozzle , Air Pipe Line For Air Impact Gun , Air Impact Gun Socket Set For Light Vehicle , Tube Hot Puncher Machine , Tub Tank For Checking Puncture of tubes , Nose Plier 8 inch , Pipe Wrench 18 inch , Chisel Set Assorted Size , Hand Drill Machine With Handle Bosch HVY , Welding hand Gloves Leather , Welding Goggles Black and White Helmet Full Face Cover , Goggle white , Sunny 10 inch and 14 inch Sandasi , C Clamp 12 inch , ARC Welding Holder Brass heavy duty , Writing Brush Assorted size 0 No to 12 No long hair , Spray Painting Gun Pilot 1 Liter size , Face Mask , Bosch sander machine No GEX 125 1AE random orbital sander , Hand painting brush half inch to 2 inch , Measuring Tape 15 Mtrs , Measuring Tape Steel 5 Mtrs , Scissor 10 inch , Tape Plastic 150 CM

Details: Provn Of Hard Standing For Parking Of Vehicles In Front Of Adm Block And Near Bldg No P-29 Of Ch (ec) Kolkata

Description: 12205ms24f, 98050011, Quantity- 78.510 Mts. Scrap Condemned Unserviceable Ms- Cs Mixed Scrap Of Carriage And Wagon And Loco Items Consisting Of Bolts, Nuts, Pins, Washers, Cotters, Head Blocks, Distance Blocks Screw Rods, Handle Supporting Bare Plates, Ms Back Locks, Mmts Racer Cover, Locking Screws, Nuts, Bmbc Components, Jigs Fixtures And Loose Spares, Safety Nuts, Jack Wheel Arms, Schaku Couplers, Coupler Spares, Tension Rods, Sheet Cut Pieces, Levers, Links, Iron Skids, Anti Roll Bar With Fork Link, Pins Electroplated, Cut Pieces Of Angles, Pipes, Channels, Flats, Plates, Rod Cut Pieces, Sabs, Cbc Housings, Common Pipe Bracket, Pivot Caps, Buffer Plates, Cbc Coupler Handles, Coupler Rods, Barrel Bush, Silent Blocks, Shackles, Wide Jaw Adaptor, Clamps, Compensating Ring, Wire Rope, Push Pull Rods, Towing Trolley, Jack Frame, Anchor Links, Lashing Chain Assembly, Destroyed Hangers And Blocks, Cap For Fuel Inlet Pipe Assembly, Cbc Back Stopper Plates, Brackets, Gear Wheels, Sheets, Pivots, Washers, Equalizing Stays, Dampers, Shock Absorbers, Dmb Rings, Dashpots, Trolley Wheels, Brake Shoes, Compressor Parts, Brake Heads, Keys, Dip Lorry Wheels, Stays Rings, Chain Cut Pieces, Draw Bar Spindle Rod, Draw Bar Support Beam, Ferrous Scrap Of Emus, Body Gear, Under Gear, Spring Gear, Draw Gear, Cbc Operating Handle, Cbc Supporting Device, Cbc Support Plate, Air Spring Suspension Bellow, Suspension Rod, Socket, Ring Retainer, Long Bolts, Mmts Rear Cover, Speedo Meter Cover, Retainer Cap, Brake Cylinder, Brake Calliper, Center Pivot, Equalizing Lever, Axle Box Covers, Berth And Door Frames, Filters, Lever Hangers, Ci Cylinder Bodies, Diesel Loco Items, Ci Hose Cocks, Piston, Piston Trunk, Ratchet With Screw Rods, Flanges, Destination Boards, Small Dia. Springs, Hooks, Articulated Lock Lift Lever Assembly, Collars, Links, Pivots, Cylinder Body, Bp And Fp Cocks, C.r.tank, Locking Screw, Locking Cups, Dmb Ring, Sab End Push Rod, Sand Ejectors, Adaptors, Wearing Plate, Centre Pivot Cover, Z Levers, Springs, Caliper Bolts, Reducing Bushes, Control Arms, Seaters, Center Pivot Tops, Pull Rods, Punching Dies, Round Rods, Bogie Under Frame Cut Pieces, Ms Drilling Jig, Horizontal Bolts, Hex Bolts With Nuts, Dividing Plates, Side Bearer Guide, Lever Box, Center Pivot Bottoms, Fabricated Structures Of Sorts And Sizes, With Or Without Attachments Of Rubber, Fiber, Nylon Bushes And Other Similar Carriage, Wagon, Mmts, Emu, Dmu And Loco Items Including Rusted And Corroded Sheets. Location- Bin No- 205, Right Side Of Road No- 2. Hsn Code- 72044900. Gst- 18 Percent. Note- Delivery On Actual Weighment Basis Only. Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery As Per Motor Vehicle Act 1988.

Description: CATEGORY: Excavating in post holes , M and L for Cement concrete , S and F mild steel work FE 290 posts or struts of fencing including drilling notching for wire etc , S and F mild steel work in MS flat OF SIZE 50 5mm for securing chain link conforming to FE 410 , S and F Round bars 10 mm dia and over cut to length incl binding with MS anealed wire not less than , M and L preparation of new surface of any description and applying two coats of synthetic enamelled paint over a coat of red oxide primer , M and L for preparation and applying two coats of synthetic enamel paint over a priming coat on new steel surface , Supply only GI chain link fencing 4mm dia made of mild steel GI mesh , Fixing only GI chain link fencing size and type straining bolts etc , S and F in repairs Galvanised 2 strand steel barbed wire , S and F punched tape concertina coil of 600mm coil dia or any other coil dia , S and F for MS screw bolts machine made with hexagonal or square heads at one end and screwed the other , Excavation in trenches in soft loose soil , M and L for walling of pre cast cement concrete block , M and L for rendering 15 mm thick to PCC solid block in CM , M and L for cement concrete , S and F framed work such as grills gratings Fe 290 , S and F automatic remote control Boom Barrier security gate , Supply for Under Vehicle Search Equipments mirror

Description: 031324110055 98110159 (01) (hsn Code: 72044900- Gst 18% On Fcm Basis), Scrap Of Cond. &u/s 8 Wheeler Wagon Bcn M1 , Bfkhn, Available On Rails. 1) Cncr Bfkhn 98258870810,2) Er Bcn M1 30028960758 3) Er Bcn M1 30028967306,4) Er Bcn M1 30028961366,5) Cr Bcn M1 30018962939 Location Road No.3 At Dump Yard. Rc Items:1.coupler Bodies T 2.coupler Bodies (nt), 3. Yokes 4. Knuckles ,5.draft Gears,6. Striker Castings T, 7.striker Castings (nt), 8.centre Pivots 9.wheel Set With Ctrb,10. Casnub Bogies With All Fittings,11.bcn Swing 12.yoke Pin Support (1st Plate),13. Safety Plate With Anchor Plate (2n D Plate 14. Yoke Support Plate(3rdplate), 15. Yoke Pin, 16) Draft Gear Followers,17. Knuckle Pin , Ds8 No:0999603055 .dt : 13.11.24. Note To Purchaser: Before Delivery Of Wagon Cut Off Parts, The Declared Rc Items Need To Be Handed Over By The Purchaser To Sse/scrap At Shop Floor By Transporting Through Purchaser¿s Vehicle/labor Approx Weight: 65.325 Mtsold On Number Basis Only Delivery In Cut Up Parts. Note:-if Any Non Ferrous Items Found In Cutting/delivery, Purchaser Should Be Handed Over To Railways. 05 Nos.

Description: 03132411 0050 98110159 (01) (hsn Code: 72044900 - Gst 18% On Fcm Basis), Scrap Ofcond. & U/s. 8 Wheeler , Bcn M1.boxnm1wagons Available On Rails. 1)nfr Bcn M130058961374,2) Nfr Bcn M130058964948,3) Scr Boxn M1 10099409103,4) Nfr Bcn M130058961701,5) Nfr Bcn M130058964184, Location Road No.1at Dump Yard. Rc Items:1.coupler Bodies (nt), 2.yokes 3.knuckles, 4.draft Gears, 5.striker Castings (nt), 6.centre Pivots, 7. Casnub Bogies With All Fittings,8.wheel Set With Ctrb9.yoke Pin Support (1st Plate), 10.safety Plate With Anchor Plate (2n D Plate), 11.yoke Support Plate(3rdplate),12.yoke Pin 13.draft Gear Follower 14 Knuck Pin.15.bcn Swing Ds8 No:0999603050 Dt:01.11.24.note To Purchaser: Before Delivery Of Wagon Cut Off Parts, The Declared Rc Items Need To Be Handed Over By The Purchaser To Sse/scrap At Shop Floor By Transporting Through Purchaser¿s Vehicle/labor Approx Weight: 66.711mt Sold On Number Basis Only Delivery In Cut Up Parts. Note:-if Any Non Ferrous Items Found In Cutting/delivery, Purchaser Should Be Handed Over To Railways. 05 Nos

Description: 031324100043 98110159 (01) (hsn Code: 72044900- Gst 18% On Fcm Basis), Scrap Of Cond. &u/s 8 Wheeler Wagon Bcn M1 , Boxn M1, , Available On Rails. 1 ). Nr Bcn M1 30038960083, 2) Nr Bcn M1 30038961790,3) Cr Bcn M1 30018763086, 4) Scr Boxn M1 10079406344, 5 ) Ner Bcn M1 30048961322, 6) Ser Bcn M1 30078963815 Location Road No.2 At Dump Yard. Rc Items: 1.coupler Bodies (nt), 2. Yokes 3. Knuckles ,4.draft Gears, 5.striker Castings (nt), 6. Centre Pivots 7.wheel Set With Ctrb, 8.casnub Bogies With All Fittings,9.yoke Pin Support (1st Plate),10. Safety Plate With Anchor Plate (2n D Plate 11. Yoke Support Plate(3rdplate), 12., Yoke Pin, 13) Draft Gear Followers,14. Knuckle Pin 15.bcn Swing. Ds8 No:0999603043 .dt : 07.10.24. Note To Purchaser: Before Delivery Of Wagon Cut Off Parts, The Declared Rc Items Need To Be Handed Over By The Purchaser To Sse/scrap At Shop Floor By Transporting Through Purchaser¿s Vehicle/labor Approx Weight: 82.668 .mt Sold On Number Basis Only Delivery In Cut Up Parts. Note:-if Any Non Ferrous Items Found In Cutting/delivery, Purchaser Should Be Handed Over To Railways. 06 Nos.

Description: 03132411 0049 98110159 (01) (hsn Code: 72044900 - Gst 18% On Fcm Basis), Scrap Ofcond. & U/s. 8 Wheeler , Bcn M1. Wagons Available On Rails. 1) Scr Bcn M1 30098961655,2) Ser Bcn M1 30078965444,3) Cr Bcn M1 30018962342,4) Er Bcn M1 30028761096,5) Cr Bcn M1 30018866121 Location Road No.1at Dump Yard. Rc Items:1.coupler Bodies (nt), 2.yokes 3.knuckles, 4.draft Gears, 5.striker Castings (nt), 6.centre Pivots, 7. Casnub Bogies With All Fittings,8.wheel Set With Ctrb9.yoke Pin Support (1st Plate), 10.safety Plate With Anchor Plate (2n D Plate), 11.yoke Support Plate(3rdplate),12.yoke Pin 13.draft Gear Follower 14 Knuck Pin.15.bcn Swing Ds8 No:0999603049 Dt:01.11.24.note To Purchaser: Before Delivery Of Wagon Cut Off Parts, The Declared Rc Items Need To Be Handed Over By The Purchaser To Sse/scrap At Shop Floor By Transporting Through Purchaser¿s Vehicle/labor Approx Weight: 72.907 Mt Sold On Number Basis Only Delivery In Cut Up Parts. Note:-if Any Non Ferrous Items Found In Cutting/delivery, Purchaser Should Be Handed Over To Railways. 05 Nos