Vehicle Tenders

Description: Lot No.divn/mn/26/09/24-25/bg/cond./8w/wgn, Description- Iron And Steel Scrap Cutup Parts Of Bg Cond./8w/wgn. Without Contents If Any. 1) Se 72079801406 Bobrnm1 (nlb) 2) Se 30079365298 Bcnam1 (nlb) 3) Nf 30059260834 Bcnam1 (nlb) 4) Se 10079665567 Boxnm1 (nlb) 5) Sc 10099660351 Boxnm1 (nlb) 6) Se 10079756586 Boxnm1 (nlb) 7) Se 30079365663 Bcnam1 (wm) 8) Wr 10089560197 Boxnm1 (wm) 9) Er 30029026538 Bcnm1 (wm & Nlb) Nb: (1): I) Wagons Are To Be Sold Without 13 Nos. Nlb Trolleys And Nl Trolleys Against Srl. No. 01 To 06 And 09-01 No. Ii) Wagons Are To Be Sold With 05 Nos Wm Trolleys Against Srl No. 07 To 08 And 09-01 No. Iii) All Wagons To Be Sold Without 36 Nos. Wheel Sets With Ctrb, Brake Cylinder Complete, Brake Gear Complete, Hand Brake Set Complete With Connecting Link, Bush, Seam Less Pipe With Fitting For Air Brake Equipment, Distributor Valve, Apm Valve, Sab, Coupler Body With Shank Wear Plate, Knuckle, Knuckle Pivot Pin, Coupler Yoke, Yoke Pin, Yoke Pin Support With Wear Plate, High Capacity Draft Gear With Draft Gear Follower, Etc And Other Excluded Fitting As Per Latest Excluded Fitting List **excluded Fitting List Letter No. M2/c-19/e.ftg/ 1302 Dt.25.10.2023, Nb(2): Special Condition For Rolling Stock- A) All Excluded Fittings Are To Be Handed Over To Sse/w-yard/nws, Trolleys To Sse/38/nws And Wheel Sets To Sse/44/nws Respectively For Which They Have To Arrange Labour,tools & Equipment For Loading Of The Excluded Fittings From Cutting Site And Then Transport It To Nominated Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Fittings By Their Own Arrangement Including Labour And Hand Over The Same To Concern Stock Holder With Clear Acknowledgement. (b) The Excluded Fittings Should Be Kept Away From The Cutting Lines And Adjacent Areas So That Future Grounding Of Rolling Stock Is Not Hampered In Any Way. The Delivery Of Cut Pieces Of Last 10 Persent Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. (c) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register. "purchaser Has Cleared All Nil Value Item Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site. (d) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolleys/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. (e)the Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In Near Vicinity Of The Cutting Spot/ Loading Point And Unloading Point Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery, And Also He Will Be Solely Responsible Of Any Loss Applied (railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Transportation Loading And Unloading Of All Excluded Fittings Of The Wagons. Including Wheel Sets And Trolleys. Nb: (3) Delivery Will Be Given In Numbers.

Description: Lot No.divn/nmp/32/10/24-25/bg/cond./8w/wgn. Description- Iron And Steel Scrap Cutup Parts Of Bg Cond./8w/wgn. Without Contents If Any. 1) Nr 30038860178 Bcnm1 (nlb) 2) Nfr 30058960162 Bcnm1 (nlb) 3) Nfr 30058960537 Bcnm1 (nlb) 4) Nfr 10059360796 Boxnm1 (nlb) 5) Er 30028810022 Bcnm1 (wm) 6) Scr 30098962393 Bcnm1 (wm) 7) Nr 10039443686 Boxnm1 (wm) Nb: (1): I) Wagons Are To Be Sold Without 08 Nos. Nlb Trolleys Against Srl. No. 01 To 04. Ii) Wagons Are To Be Sold With 06 Nos Wm Trolleys Against Srl No. 05 To 07. Iii) All Wagons To Be Sold Without 28 Nos. Wheel Sets With Ctrb, Brake Cylinder Complete, Brake Gear Complete, Hand Brake Set Complete With Connecting Link, Bush, Seam Less Pipe With Fitting For Air Brake Equipment, Distributor Valve, Apm Valve, Sab, Coupler Body With Shank Wear Plate, Knuckle, Knuckle Pivot Pin, Coupler Yoke, Yoke Pin, Yoke Pin Support With Wear Plate, High Capacity Draft Gear With Draft Gear Follower, Etc And Other Excluded Fitting As Per Latest Excluded Fitting List * *excluded Fitting List Letter No. M2/c-19/e.ftg/ 1302 Dt.25.10.2023, Nb(2): Special Condition For Rolling Stock- A) All Excluded Fitting Along With Nlb Trolleys And Wheel Sets Are To Be Handed Over By The Purchaser To Sse/c&w/nmp At (nimpura) Nominated Location Suggested By The Concerned Sse Respectively For Which They Have To Arrange Labour,tools & Equipment For Loading Of The Excluded Items From Cutting Site And Then Transport It To Nominated Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Materials By Their Own Arrangement Including Labour And Hand Over The Same To Concern Stock Holder With Clear Acknowledgement. (b) The Excluded Fittings Should Be Kept Away From The Cutting Lines And Adjacent Areas So That Future Grounding Of Rolling Stock Is Not Hampered In Any Way. The Delivery Of Cut Pieces Of Last 10 Percent Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. (c) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register. "purchaser Has Cleared All Nil Value Item Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site. (d) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolleys/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. (e)the Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In Near Vicinity Of The Cutting Spot/ Loading Point And Unloading Point Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery, And Also He Will Be Solely Responsible Of Any Loss Applied (railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Transportation Loading And Unloading Of All Excluded Fittings Of The Wagons. Including Wheel Sets And Trolleys. Nb: (3) Delivery Will Be Given In Numbers.

Description: Lot No.divn/mn/27/09/24-25/bg/cond./8w/wgn, Description- Iron And Steel Scrap Cutup Parts Of Bg Cond./8w/wgn. Without Contents If Any. 1) Se 25079460463 Boxnr (nlb) Steel Body 2) Er 25029660196 Boxnr (nlb) Steel Body 3)er 25029760025 Boxnr (nlb) Steel Body 4) Se 25079763755 Boxnr (nlb) Steel Body 5) Se 30078961507 Bcnm1 (nlb) 6) Nf 30058966546 Bcnm1 (wm) 7) Cr 30018961925 Bcnm1 (wm) 8) Nf 30059260247 Bcnam1 (wm) 9) Se 30079365533 Bcnam1(wm) Nb: (1): I) Wagons Are To Be Sold Without 10 Nos. Nlb Trolleys And Nl Trolleys Against Srl. No. 01 To 05. Ii) Wagons Are To Be Sold With 08 Nos Wm Trolleys Against Srl No. 06 To 09. Iii) All Wagons To Be Sold Without 36 Nos. Wheel Sets With Ctrb, Brake Cylinder Complete, Brake Gear Complete, Hand Brake Set Complete With Connecting Link, Bush, Seam Less Pipe With Fitting For Air Brake Equipment, Distributor Valve, Apm Valve, Sab, Coupler Body With Shank Wear Plate, Knuckle, Knuckle Pivot Pin, Coupler Yoke, Yoke Pin, Yoke Pin Support With Wear Plate, High Capacity Draft Gear With Draft Gear Follower, Etc And Other Excluded Fitting As Per Latest Excluded Fitting List * *excluded Fitting List Letter No. M2/c-19/e.ftg/ 1302 Dt.25.10.2023, Nb(2): Special Condition For Rolling Stock- A) All Excluded Fittings Are To Be Handed Over To Sse/w-yard/nws, Trolleys To Sse/38/nws And Wheel Sets To Sse/44/nws Respectively For Which They Have To Arrange Labour,tools & Equipment For Loading Of The Excluded Fittings From Cutting Site And Then Transport It To Nominated Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Fittings By Their Own Arrangement Including Labour And Hand Over The Same To Concern Stock Holder With Clear Acknowledgement. (b) The Excluded Fittings Should Be Kept Away From The Cutting Lines And Adjacent Areas So That Future Grounding Of Rolling Stock Is Not Hampered In Any Way. The Delivery Of Cut Pieces Of Last 10 Persent Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. (c) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register. "purchaser Has Cleared All Nil Value Item Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site. (d) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolleys/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. (e)the Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In Near Vicinity Of The Cutting Spot/ Loading Point And Unloading Point Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery, And Also He Will Be Solely Responsible Of Any Loss Applied (railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Transportation Loading And Unloading Of All Excluded Fittings Of The Wagons. Including Wheel Sets And Trolleys. Nb: (3) Delivery Will Be Given In Numbers.

Description: CATEGORY: LED Bulb 18 W , LED Bulb 9W Thread Type , Bulb Zero Watt Red , Bulb Zero Watt Yellow , Bulb Zero Watt Green , LED Strip Green , LED Strip Blue , Tube Light LED , Pencil Cell AA , Pencil Cell AAA , Flexible Wire , Screw Driver Set Taparia , Power Board 04 X 16 5 Amp Socket and Switch , Line Tester , 16 20 Amp Socket and Switch , 5 7 Amp Plug , 5 7 Amp Socket Female , 6 Amp Plug 3 Pin , Extension Board 16A 6A , 3 Pin Male Socket , Bulb Holder , Wire 2 Core 3mm , Glass Cleaner , Dusting Cloth , Harpic 750ml , Car Freshner , Black Hit , Vim Liquid 1 Ltr , Car Polish , Pocha Cloth , Dettol Handwash , Malathion 50 percent Spray , Odonil , Anti Snake Repellent 1 Ltr , Wiper , Air Piper Push Connector 6 X 4 mm , Air Piper Push Connector 12 X 6 mm , Air Piper Push Connector 8 X 6 mm , Air Piper Push Connector 10 X 4 mm , Air Piper Push Connector 12X 8 mm , Air Piper Push Connector 12 X4 mm , Male Thread Air Pipe Connector 1 2 , Male Thread Air Pipe Connector 1 4 , Male Thread Air Pipe Connector 1 8 , Male Thread Air Pipe Connector 3 8 , Carbon Cleaner Spray , Nail 1 , Nail 1 2 , Nail 1 1 2 , Nail 4 , Umbrella Head Roofing Nail , Geyser Pipe Inlet and Outlet , Hinges for Door , Self Screw 1 , Self Screw 1 2 , Self Screw 2 , Self Screw 3 , Welding Rods , Welding Safety Glass , Emery Paper Sand Paper , Insulation Tape , Flexible Pipe for Sprinkle , Filter Clamp , Hose Clamp Set 08mm to 80mm , Toilet Jet Spray Set , Chain for Electric Chain Saw Machine , Door Drop Sliding Handle Lock Aluminium Set , Thread Tape , Basin Coupling , Sink Coupling , Screw Bolt Extractor Set in Metal Case , Notch Plier Inner , Notch Plier Outer , Towel Small for light vehicles , Blanket , Double Bed Sheet , Single Bed Sheet

Description: Lot No.ws/ayma/31/09/24-25/bg/cond./4w/8w/wgn. Description- Iron And Steel Scrap Cutup Parts Of Bg Cond/4w/8w/wgn. Without Contents If Any. 1) Nr 10039673816 Boxnm1 (nlb) 2) Er 10029660727 Boxnr (nlb) Sttel Body 3) Nr 25039760336 Boxnr (nlb) Steel Body 4) Er 72029559449 Bobrnm1 (nlb) 5)cr 99019802569 Brn (nlb) 6) Sr 10069648914 Boxnr (nlb) Steel Body 7) Er 25029560717 Boxnr (nlb) Steel Body 8) Se 10079562156 Boxnr (nlb) Steel Body 9) Sc 10099522901 Boxnm1 (nlb) 10) Sc 85099560024 Bvzc Nb: (1): I) Wagons Are To Be Sold Without 18 Nos. Nlb Trolleys Against Srl. No. 01 To 09 Ii) Wagon Serial No. 01 To 09 To Be Sold Without 36 Nos. Wheel Sets With Ctrb, Brake Cylinder Complete, Brake Gear Complete, Hand Brake Set Complete With Connecting Link, Bush, Seam Less Pipe With Fitting For Air Brake Equipment, Distributor Valve, Apm Valve,sab, Coupler Body With Shank Wear Plate, Knuckle, Knuckle Pivot Pin, Coupler Yoke, Yoke Pin, Yoke Pin Support With Wear Plate, High Capacity Draft Gear With Draft Gear Follower Etc And Other Excluded Fitting As Per Latest Excluded Fitting List* Iii) Wagon Serial No. 10 To Be Sold Without 02 Nos. R/b Wheel Sets , Axle Box Cover Plate , Bg Spring And Brake Gear With Lever Pull Rod Etc . As Per Latest Fitting List . *(it Contains No Trolley) ** Excluded Fittings List Letter No. M2/c-19/e.ftg/ 1302 Dt.25.10.2023, Nb(2): Special Condition For Rolling Stock- A) All Excluded Materials Including Wheel Sets And Nlb Trolleys Are To Be Handed Over By The Purchaser At The Nominated Location Suggested By The Concerned Sse For Which They Have To Arrange Labour,tools & Equipment For Loading Of The Excluded Items From Cutting Site And Then Transport It To Nominated Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Materials By Their Own Arrangement Including Labour And Hand Over The Same To Concern Stock Holder With Clear Acknowledgement. (b) The Excluded Fittings Should Be Kept Away From The Cutting Lines And Adjacent Areas So That Future Grounding Of Rolling Stock Is Not Hampered In Any Way. The Delivery Of Cut Pieces Of Last 10 Percent Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. (c) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register. "purchaser Has Cleared All Nil Value Item Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site. (d) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolleys/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. (e)the Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In Near Vicinity Of The Cutting Spot/ Loading Point And Unloading Point Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery, And Also He Will Be Solely Responsible Of Any Loss Applied (railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Transportation Loading And Unloading Of All Excluded Fittings Of The Wagons. Including Wheel Sets And Trolleys. Nb: (3) Delivery Will Be Given In Numbers.

Description: Lot No.m/stb/adme/nmp/08/24-25/20, Description- Scrap Steel Turning Boring (stb) . Materials To Be Sold "as Is Where Is Basis". Loading Will Be Commance From West End Side. Special Conditions For Lot No: M/stb/adme/nmp/08/24-25/20 1. The Bidders Must Inspect The Location Of Steel Turning And Boring As Mentioned In Lot Details And Satisfy Themselves On All Points Before Submitting Their Bids. The Bidders Are Advised To Point Out Discrepancy, If Any, Well Before Start Of Bidding Process. Once The Bid Is Submitted, No Claims In Respect Of Quality/quantity, Location, Description And Delivery Of Materials, Special Request Etc. Shall Be Entertained. 2. Delivery Should Commence From West End Side, Pick And Choosing Will Not Be Allowed. Delivery Witnessing Official Will Ensure The Same. 3. Safety Of Purchaser Staff And Railway Property: Purchaser Will Arrange To Provide Safety Gears To His Engaged Worker And Abide By All Relevant Regulations. Any Injury /death / Accident Caused During Delivery Of Scrap Will Be On Purchaser's Account. No Railway Property Shall Be Damaged In Course Of Delivery. If Any Damage Is Sustained To Railway Property, Proportionate Loss Value Will Be Recovered From Purchaser. 4. Weighment Of Truck: The Empty Truck Will Be Weighed On Calibrated Working Electronic Weighbridge Only At Amm/s-yard /kgp In Presence Of Delivery Witnessing Official. The Nominal Payment On Private Weighbridge Will Be Paid By Purchaser. After Loading Of Steel Turning And Boring, Final Weighment Will Be Taken On The Same Weighbridge In Presence Of Delivery Witnessing Official. 5. At The Time Of Loading The Stock Holder Concerned Reserves Himself The Right To Determine How Near To A Lot Purchaser's Vehicles May Be Parked For The Purpose Of Loading; Purchaser Must Ascertain This At The Time Of Inspection Of Materials. 6. The Purchaser Will Solely Be Responsible For The Payment Of Any Compensation For Injury Or Death Caused To The Labor Employed By Him For Cutting/loading/removal Etc. Of The Purchases In Accordance With The Govt. Laws. The Railway Administration Will Have Nothing To Do In This Concern. The Contractor Shall Be Liable For All Material Or Works Spoiled Or Damaged By His Men And He Shall Pay The Cost Of Any Damage Done To The Property Of The Railway Administration While Performing This Contract And He Shall Personally Be Responsible For Any Unsatisfactory Work Or Any Detention Caused To The Railway Works Or To Train, Through The Negligence Of His Men For Which He Will Accept Any Penalty That May Be Inflicted By The Railway Administration. 7. Delivery Program And Witnessing Of Delivery: Delivery Program And Co-ordination For Delivery Witnessing Official Will Be Made By Stock Holder. The Delivery Of Stb Will Be Witnessed By Sr.isa/sv, Pc/rpf (preferably Of Inspector Rank), Stock Holder(s). 8. The Delivery Of The Materials Will Be Given On Weighment Basis. 9. No Sale Delivery Will Be Given On Gazetted Holidays Or Other Holidays Observed By The Depot/division/workshop. [continued In Special Conditions...]

Description: Lot No.m/stb/nws/10/24-25/22, Description- Scrap Steel Turning Boring (stb) . Materials To Be Sold "as Is Where Is Basis". Special Conditions - 1. The Bidders Must Inspect The Location Of Steel Turning And Boring As Mentioned In Lot Details And Satisfy Themselves On All Points Before Submitting Their Bids. The Bidders Are Advised To Point Out Discrepancy, If Any, Well Before Start Of Bidding Process. Once The Bid Is Submitted, No Claims In Respect Of Quality/quantity, Location, Description And Delivery Of Materials, Special Request Etc. Shall Be Entertained. 2.delivery Should Commence From West End Side Pick And Choosing Will Not Be Allowed. Delivery Witnessing Officialwill Ensure The Same. 3. Safety Of Purchaser Staff And Railway Property: Purchaser Will Arrange To Provide Safety Gears To His Engagedworker And Abide By All Relevant Regulations. Any Injury /death / Accident Caused During Delivery Of Scrap Will Be Onpurchaser's Account. No Railway Property Shall Be Damaged In Course Of Delivery. If Any Damage Is Sustained Torailway Property, Proportionate Loss Value Will Be Recovered From Purchaser. 4. Weighment Of Truck: The Empty Truck Will Be Weighed On Calibrated Working Electronic Weighbridge Only At Amm/r-yard /kgp In Presence Of Delivery Witnessingofficial. The Nominal Payment On Private Weighbridge Will Be Paid By Purchaser. After Loading Of Steelturning And Boring, Final Weighment Will Be Taken On The Same Weighbridge In Presence Of Delivery Witnessing Official. 5. At The Time Of Loading The Stock Holder Concerned Reserves Himself The Right To Determine How Near To A Lot Purchaser's Vehicles May Be Parked For The Purpose Of Loading; Purchaser Must Ascertain This At The Time Ofinspection Of Materials. 6. The Purchaser Will Solely Be Responsible For The Payment Of Any Compensation For Injury Or Death Caused To The Labor Employed By Him For Cutting/loading/removal Etc. Of The Purchases In Accordance With The Govt. Laws. Therailway Administration Will Have Nothing To Do In This Concern. The Contractor Shall Be Liable For All Material Or Works Spoiled Or Damaged By His Men And He Shall Pay The Cost Of Any Damage Done To The Property Of Therailway Administration While Performing This Contract And He Shall Personally Be Responsible For Any Unsatisfactory Work Or Any Detention Caused To The Railway Works Or To Train, Through The Negligence Of His Menfor Which He Will Accept Any Penalty That May Be Inflicted By The Railway Administration. 7.delivery Program And Witnessing Of Delivery: Delivery Program Andco-ordination For Delivery Witnessing Official Will Be Made By Stock Holder. The Delivery Of Stb Will Be Witnessed By Sr.isa/sv, Pc/rpf (preferably Of Inspector Rank), Stock Holder(s). 8. The Delivery Of The Materials Will Be Given On Weighment Basis. 9. No Sale Delivery Will Be Given On Gazetted Holidays Or Other Holidays Observed By Thedepot/division/workshop. [continued In Special Conditions...]

Description: Lot No.m/stb/adme/nmp/11/24-25/25, Description- Scrap Steel Turning Boring (stb). Materials To Be Sold "as Is Where Is Basis". Loading Will Be Commance From West End Side To East End Side. Special Conditions Vide Lot No: M/stb/adme/nmp/11/24-25/25, 1. The Bidders Must Inspect The Location Of Steel Turning And Boring As Mentioned In Lot Details And Satisfy Themselves On All Points Before Submitting Their Bids. The Bidders Are Advised To Point Out Discrepancy, If Any, Well Before Start Of Bidding Process. Once The Bid Is Submitted, No Claims In Respect Of Quality/quantity, Location, Description And Delivery Of Materials, Special Request Etc. Shall Be Entertained. 2. Delivery Should Commence From West End Side And East End Side, Pick And Choosing Will Not Be Allowed. Delivery Witnessing Official Will Ensure The Same. 3. Safety Of Purchaser Staff And Railway Property: Purchaser Will Arrange To Provide Safety Gears To His Engaged Worker And Abide By All Relevant Regulations. Any Injury /death / Accident Caused During Delivery Of Scrap Will Be On Purchaser's Account. No Railway Property Shall Be Damaged In Course Of Delivery. If Any Damage Is Sustained To Railway Property, Proportionate Loss Value Will Be Recovered From Purchaser. 4. Weighment Of Truck: The Empty Truck Will Be Weighed On Calibrated Working Electronic Weighbridge Only At Amm/s-yard /kgp In Presence Of Delivery Witnessing Official. The Nominal Payment On Private Weighbridge Will Be Paid By Purchaser. After Loading Of Steel Turning And Boring, Final Weighment Will Be Taken On The Same Weighbridge In Presence Of Delivery Witnessing Official. 5. At The Time Of Loading The Stock Holder Concerned Reserves Himself The Right To Determine How Near To A Lot Purchaser's Vehicles May Be Parked For The Purpose Of Loading; Purchaser Must Ascertain This At The Time Of Inspection Of Materials. 6. The Purchaser Will Solely Be Responsible For The Payment Of Any Compensation For Injury Or Death Caused To The Labor Employed By Him For Cutting/loading/removal Etc. Of The Purchases In Accordance With The Govt. Laws. The Railway Administration Will Have Nothing To Do In This Concern. The Contractor Shall Be Liable For All Material Or Works Spoiled Or Damaged By His Men And He Shall Pay The Cost Of Any Damage Done To The Property Of The Railway Administration While Performing This Contract And He Shall Personally Be Responsible For Any Unsatisfactory Work Or Any Detention Caused To The Railway Works Or To Train, Through The Negligence Of His Men For Which He Will Accept Any Penalty That May Be Inflicted By The Railway Administration. 7. Delivery Program And Witnessing Of Delivery: Delivery Program And Co-ordination For Delivery Witnessing Official Will Be Made By Stock Holder. The Delivery Of Stb Will Be Witnessed By Sr.isa/sv, Pc/rpf (preferably Of Inspector Rank), Stock Holder(s). 8. The Delivery Of The Materials Will Be Given On Weighment Basis. 9. No Sale Delivery Will Be Given On Gazetted Holidays Or Other Holidays Observed By The Depot/division/workshop. [continued In Special Conditions...]

Description: 12231ms24h,98050175, Quantity- 120 Mts. Scrap Condemned Unserviceable Ms-gi-ci Rusted, Corroded,dusted Mixed Scrap Of C And W,loco,p. Way,signal Interlocking Material Consisting Of All Type Of Sheets,boxes,ms High Gauge,pipes,footsteps,rings,strips,filters,trusses,patch Cut Parts,gutters,drum Clocks,distribution Boards,u Rack,boring Rod,ms Panel Body,ms Battery Charger Covers,hand Cuffs,driver Seat,hand Cart,push Trolley,packing Strips,ms Body Of Block Instrument,ms Boiler Coil Cut Pieces,42 U Rack Ms Body,ms Collapsible Gate,ms Termination Box,ms Bathroom Ventilator,ms Body Of Data Logger,ms Heater Coil,screen Guard,nuts,bolts,lavatory Doors,ms Carriage Doors,pins,rivets,links,rods,angle Cut Pieces,structural Frames,brackets,drums,cocks,basins,wire Meshes,wire Ropes,water Tank Cut Up Parts,casings,corrugated Sheets,filter Top And Bottom Caps,clamps,washer Plates,stands,frames,sheet Cuts,plate Cuts,joists,channels,bases,plates,flats Cut Pieces,vestibule Frames,window,door,shutters,head Stocks Cut Up Parts,broken T And P Items,racks,compensating Rings,bindings,washers,dust Bins,chains,berth Strips,gate Frames,iron Furniture,motor Bodies,screw Rods,levers,flats,rod Cut Pieces,trolley Wheels,gi Ducts,glow Sign Boards,ms Electrical Scrap,building Rods,packing Strips,ms Body Of Rru,air Cooler Empty Bodies,cbf Filter,corrugated Sheets,drums,blower Motor Frames,ucb Packing Frames,under Frame Cut Up Parts,berth Frames,supports,cylinder Blower Covers,valves,end Shield Covers,traction Motor Yokes,shafts,piston Rings,gears,brake Shoe Heads,brake Gear Items,straps,cotters,springs,equalizing Stays,fan Hub,end Shield,pinions,ms Covers,signal Arms,lc Gate Pipes,ladders,angles,signal Booms,rounds,signal Buckets,pulleys,fabricated Posts,signal Lamp Structures,liners,screws,spikes,air Brake Cylinders,brake Hangers,bss Hangers,battery Boxes,battery Containers,junction And Location Boxes,sleepers Cut Pieces,axle Counter Empty Box,dc-dp Ips Empty Rack ,sge Block Instrument Empty Box ,reset Counter Box,gps Clock ,42 V Rack,transformer Bay,ms Chain Pulley Blocks,beam Scale Parts,idly Cooker With Steam Generator Body,wheel Barrow,fry Pan Single Burner,ms Floor Stand,ms Sliders,ms Body Wet Grinder,fry Pan,jara,ms Ips Rack Rifle Safety Chain,ms Air Pump,foot Spray,antenna,spiral Binding Machine,ms Man Drill,trbc Covers,hand Cart Push Trolley,expresser Fan Guard,ms First Aid Box,hacksaw Frame,tool Box,tie Bars,ci Brake Blocks,composite Brake Blocks,ci Pulleys,buckets,ms Gear Wheels,gym Equipment,roti Maker,bicycle Parts,axle Box,bfr Cut Up Parts,grills,mesh,gate Wheels,girders Cut Pieces,collars,trolleys,foot Plates,signal Point Rods And Any Other Ms-gi-ci Material Present In The Lot With Or Without Attachments Of Nf,ss,rubber,nylon And Plastic. Ms Pan Mortars,wire Claws,wire Baskets,crow Bars,jim Crow,dip Lorry,weld Filling Body,sleeper Hooks,rail Dollies,rail Cutting Frames,augers,pick Axe,tongue For Rails,spades,beaters,ballast Rake,powrahs,rail Cum Road Mono Trolley,case Tin,h.s.lamps,rail Dolly Clips,shovels,trolley Wheels And Similar Gang Man Items Of Sorts And Sizes,with Or Without Attachments.fiber,glass,windows,frp Glass Windows,window Frames Of Sorts And Sizes,broken Or Unbroken,with Or Without Attachments Of Nf Window Shutters. [aluminium - 2 Percent] Note- 1. Nf Material,axles,wheel Discs,and Rails Or Material Not Mentioned In The Description,if Found During The Delivery Are To Be Returned To Railways. 2. Track And Track Fittings Running Through This Area Are Excluded. 3. Nf And Stainless-steel Attachments Are Approximately 0.1 Percent Of The Lot Quantity. 4. Gas Cutting Permitted To Facilitate Loading. Location- Bin No- 231, Right Side Of Road No- 2.hsn Code- 72044900. Gst- 18 Percent. Note- Delivery On Actual Weighment Basis Only. Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery

Description: CATEGORY: mm by 4 mm , MS Flat 40 mm by 6 mm , Hose pipe high pressurebfor car washing plant with nozzle pipe length 20 mtr , Plastic pipe flexible 12 mm ID 16 mm OD , Araldite 36 gram tube , M seal 100 gram , Spring washer 10 mm ID , Spring washer 11 mm ID , Spring washer 12 mm ID , Spring washer 13 mm ID , Spring washer 14 mm ID , Hose clamp 15 mm size , Hose clamp 25 mm size , Hose clamp 50 mm size , Hose clamp 75 mm size , Hose clamp 100 mm size , Copper benjo washer 12 mm pkt of 100 nos , Benjo washer inner dia 17 mm pkt of 100 nos , Benjo washer inner dia 10 mm pkt of 100 nos , Benjo washer inner dia 19 mm pkt of 100 nos , Benjo washer inner dia 14 mm pkt of 100 nos , Plain washer 10 mm size , Plain washer 12 mm size , Plain washer 14 mm size , Plain washer 16 mm size , Plain washer 18 mm size , Plain washer 20 mm size , Soap yellow , Rope Manila size 1 inch for recover veh , Number punch 0 to 9 size 5 by 16 inch , Letter punch A to Z size 5 by 16 inch , Fog light with complete fittings for Lt Vehs , Rear oblique side view mirror with complete fittings for Lt Vehs , Belt fastener Nut and Bolt type , Cotton waste superior quality , Rear oblique side view mirror with complete fittings for all model vehicles , Horn 12 V for Maruti Gypsy , Nut with bold 22 mm head length of inch , Nut with bold 20 mm head length of 04 inch , Nut with bold 18 mm head length of 03 inch , Nut with bold 16 mm head length of 03 inch , Nut with bold 14 mm head length of 03 inch , Nut with bold 12 mm head length of 21 by 2 inch , Nut with bold 11 mm head length of 2 1 by 2 inch , Die and Tap 10 into 1 mm pitch , Die and Tap 10 into 1pt25 mm pitch , Die and Tap 10 into 1pt5 mm pitch , Die and Tap 16 into 1pt5 mm pitch , Die and Tap 16 into 2 mm pitch , Die and Tap 6 into 1 mm pitch , Die and Tap 8 into 1pt25 mm pitch , Die and Tap 18 into 2 mm pitch , Die and Tap 18 into 1pt5 mm pitch , Die and Tap 20 into 2pt5 mm pitch , Die and Tap 22 into 1pt5 mm pitch , Die and Tap 22 into 2pt5 mm pitch , Die and Tap 24 into 1pt5 mm pitch , Brass Rod 1 inch dia , Hex Rod , Buffing wheel size 150 mm cotton whell , Buffing shop bar , Drill Bit 1 mm , Drill Bit 10 mm , Drill Bit 12 mm , Drill Bit 12pt5 mm , Drill Bit 13pt5 mm , Drill Bit 14 mm , Drill Bit 14pt5 mm , Drill Bit 15 mm