Vehicle Tenders

Description: C/o School Bldg , Boys And Girls Hostel Including Warden Residence , Principal Qtr , 15 Nos Type Iii Qtrs And Guest Room , 10 Nos Type Ii Qtrs Kitchen And Dinning Sub Ststion And Pump Room Including Internal Water Supply And Sanitary Isntallations, Drainage Compound Wall Developement Of Site And Bulk Service Civil And Electrical Of Emrs At Uplat Talasari Palghar Maharashtra Subwork/packages:hiring Of Inspection Vehicles For Sub Division I Office , Boisar

Description: 03132412 0066 98110159 (01) (hsn Code: 72044900 - Gst 18% On Fcm Basis), Scrap Of Cond. & U/s. 8 Wheeler , Bcn M1. Wagons Available On Rails . 1) Ser Bcn M1 30078956442. 2) Sr Bcn M1 30068860797.3) Wr Bcn M1 30088962143. 4) Nr Bcn M1 30038912433. 5) Cr Bcn M1 30018960683 Location Road No.2 At Dump Yard. Rc Items:. 1 ..coupler Bodies (nt), 2.yokes 3..knuckles, 4 .draft Gears, 5...striker Castings (nt), 6.centre Pivots, 7. Casnub Bogies With All Fittings, 8..wheel Set With Ctrb 9 .yoke Pin Support (1st Plate), 10 .safety Plate With Anchor Plate (2n D Plate), 11..yoke Support Plate(3rdplate),12..yoke Pin 13..draft Gear Follower 14. Knuckle Pin. 15..bcn Swing. Ds8 No :0999603066 Dt:14.12.24. Note To Purchaser: Before Delivery Of Wagon Cut Off Parts, The Declared Rc Items Need To Be Handed Over By The Purchaser To Sse/scrap At Shop Floor By Transporting Through Purchaser¿s Vehicle/labor Approx Weight :ms: 73.473 Mt Sold On Number Basis Only Delivery In Cut Up Parts. Note:-if Any Non Ferrous Items Found In Cutting/delivery, Purchaser Should Be Handed Over To Railways. 05 Nos

Description: 031324110055 98110159 (01) (hsn Code: 72044900- Gst 18% On Fcm Basis), Scrap Of Cond. &u/s 8 Wheeler Wagon Bcn M1 , Bfkhn, Available On Rails. 1) Cncr Bfkhn 98258870810,2) Er Bcn M1 30028960758 3) Er Bcn M1 30028967306,4) Er Bcn M1 30028961366,5) Cr Bcn M1 30018962939 Location Road No.3 At Dump Yard. Rc Items:1.coupler Bodies T 2.coupler Bodies (nt), 3. Yokes 4. Knuckles ,5.draft Gears,6. Striker Castings T, 7.striker Castings (nt), 8.centre Pivots 9.wheel Set With Ctrb,10. Casnub Bogies With All Fittings,11.bcn Swing 12.yoke Pin Support (1st Plate),13. Safety Plate With Anchor Plate (2n D Plate 14. Yoke Support Plate(3rdplate), 15. Yoke Pin, 16) Draft Gear Followers,17. Knuckle Pin , Ds8 No:0999603055 .dt : 13.11.24. Note To Purchaser: Before Delivery Of Wagon Cut Off Parts, The Declared Rc Items Need To Be Handed Over By The Purchaser To Sse/scrap At Shop Floor By Transporting Through Purchaser¿s Vehicle/labor Approx Weight: 65.325 Mtsold On Number Basis Only Delivery In Cut Up Parts. Note:-if Any Non Ferrous Items Found In Cutting/delivery, Purchaser Should Be Handed Over To Railways. 05 Nos.

Description: CATEGORY: Wood Lathe machine 01 nos , Drilling machine , Power Jig Saw , Wood cutting and Planing machine , Grinding machine Qty 3 Nos , Power band saw 01 Nos , Floating dock model , ICCP training jig , Anchor and capstan , Lathe machines Qty 5 Nos , Pipe bending machines Qty 1 Nos , Compressor 500 Ltrs Min Qty 01 , Compressor 420 Ltrs Min Qty 01 , Compressor 200 Ltrs Min Qty 01 , Radial Davit , Bow door and Ramp Door 2 nos , Radial Drilling Machine , Twin arm davit , Single Arm Davit , Accommodation Ladder , Sewage Treatment Plant , Vacuum Toilet System , Hydraulic Davit model , Hydraulic Hangar Door model , Fork Lift , Electrical Lister Vehicle , Deck Washing Machine , Lathe Machine with accessories Manufacturer Parmar Mechanic Works , Barmi Miling Machine , Disc Grinder 3 inch , Double Disc Grinder DDS 18 inch , Pelicon Combined Surface Thickness Model SSPI , Air Compressor with accessories , Drilling Machine Swift Bench Type , Circular saw bench rise and fall , Pelico n Wood and Metal Bend Saw Machine , Facit saw Machine , Pencil Grinder Size 6 inch , Hard field Circular Saw machine , Jig Saw machine with square table pedestal , Bench Lathe Machine , Helo Traversing System HTS Make L and T , Foldable Hanger Door FHD Make L and T

Description: 03132411 0050 98110159 (01) (hsn Code: 72044900 - Gst 18% On Fcm Basis), Scrap Ofcond. & U/s. 8 Wheeler , Bcn M1.boxnm1wagons Available On Rails. 1)nfr Bcn M130058961374,2) Nfr Bcn M130058964948,3) Scr Boxn M1 10099409103,4) Nfr Bcn M130058961701,5) Nfr Bcn M130058964184, Location Road No.1at Dump Yard. Rc Items:1.coupler Bodies (nt), 2.yokes 3.knuckles, 4.draft Gears, 5.striker Castings (nt), 6.centre Pivots, 7. Casnub Bogies With All Fittings,8.wheel Set With Ctrb9.yoke Pin Support (1st Plate), 10.safety Plate With Anchor Plate (2n D Plate), 11.yoke Support Plate(3rdplate),12.yoke Pin 13.draft Gear Follower 14 Knuck Pin.15.bcn Swing Ds8 No:0999603050 Dt:01.11.24.note To Purchaser: Before Delivery Of Wagon Cut Off Parts, The Declared Rc Items Need To Be Handed Over By The Purchaser To Sse/scrap At Shop Floor By Transporting Through Purchaser¿s Vehicle/labor Approx Weight: 66.711mt Sold On Number Basis Only Delivery In Cut Up Parts. Note:-if Any Non Ferrous Items Found In Cutting/delivery, Purchaser Should Be Handed Over To Railways. 05 Nos

Description: 031324100043 98110159 (01) (hsn Code: 72044900- Gst 18% On Fcm Basis), Scrap Of Cond. &u/s 8 Wheeler Wagon Bcn M1 , Boxn M1, , Available On Rails. 1 ). Nr Bcn M1 30038960083, 2) Nr Bcn M1 30038961790,3) Cr Bcn M1 30018763086, 4) Scr Boxn M1 10079406344, 5 ) Ner Bcn M1 30048961322, 6) Ser Bcn M1 30078963815 Location Road No.2 At Dump Yard. Rc Items: 1.coupler Bodies (nt), 2. Yokes 3. Knuckles ,4.draft Gears, 5.striker Castings (nt), 6. Centre Pivots 7.wheel Set With Ctrb, 8.casnub Bogies With All Fittings,9.yoke Pin Support (1st Plate),10. Safety Plate With Anchor Plate (2n D Plate 11. Yoke Support Plate(3rdplate), 12., Yoke Pin, 13) Draft Gear Followers,14. Knuckle Pin 15.bcn Swing. Ds8 No:0999603043 .dt : 07.10.24. Note To Purchaser: Before Delivery Of Wagon Cut Off Parts, The Declared Rc Items Need To Be Handed Over By The Purchaser To Sse/scrap At Shop Floor By Transporting Through Purchaser¿s Vehicle/labor Approx Weight: 82.668 .mt Sold On Number Basis Only Delivery In Cut Up Parts. Note:-if Any Non Ferrous Items Found In Cutting/delivery, Purchaser Should Be Handed Over To Railways. 06 Nos.

Description: 031324100045 98110159 (01) (hsn Code: 72044900- Gst 18% On Fcm Basis), Scrap Of Cond. &u/s 8 Wheeler Wagon Bcn M1 , Boxn M1, , Available On Rails. 1) Cr Bcn M1 30018964049, 2) Nfr Boxn M1 10059161997, 3) Nr Bcn M1 30038905589 , 4) Ser Bcn M1 30078961736,5) Cr Bcn M1 30018960492 Location Road No.2 At Dump Yard. Rc Items: 1.coupler Bodies (nt), 2. Yokes 3. Knuckles ,4.draft Gears, 5.striker Castings (nt), 6. Centre Pivots 7.wheel Set With Ctrb, 8.casnub Bogies With All Fittings,9.yoke Pin Support (1st Plate),10. Safety Plate With Anchor Plate (2n D Plate 11. Yoke Support Plate(3rdplate), 12., Yoke Pin, 13) Draft Gear Followers,14. Knuckle Pin 15.bcn Swing.16. Boxn Doors Ds8 No:0999603045 .dt:07.10.24. Note To Purchaser: Before Delivery Of Wagon Cut Off Parts, The Declared Rc Items Need To Be Handed Over By The Purchaser To Sse/scrap At Shop Floor By Transporting Through Purchaser¿s Vehicle/labor Approx Weight: 66.513 .mt Sold On Number Basis Only Delivery In Cut Up Parts. Note:-if Any Non Ferrous Items Found In Cutting/delivery, Purchaser Should Be Handed Over To Railways. 05 Nos.

Description: 03132411 0051 98110159 (01) (hsn Code: 72044900 - Gst 18% On Fcm Basis), Scrap Ofcond. & U/s. 8 Wheeler , Bcn M1.boxnm1,boxnr Wagons Available On Rails. 1) Nr Bcn M1 30038961035, 2) Scr Boxn M1 10099409721, 3) Ser Boxnr 25079360091,4) Ser Boxn M1 10079366280, 5) Scr Boxnr10099361180, Location Road No.1at Dump Yard. Rc Items:1.coupler Bodies (nt), 2.yokes 3.knuckles, 4.draft Gears, 5.striker Castings (nt), 6.centre Pivots, 7. Casnub Bogies With All Fittings,8.wheel Set With Ctrb9.yoke Pin Support (1st Plate), 10.safety Plate With Anchor Plate (2n D Plate), 11.yoke Support Plate(3rdplate),12.yoke Pin 13.draft Gear Follower 14 Knuck Pin.15.bcn Swing Ds8 No:0999603051 Dt:01.11.24.note To Purchaser: Before Delivery Of Wagon Cut Off Parts, The Declared Rc Items Need To Be Handed Over By The Purchaser To Sse/scrap At Shop Floor By Transporting Through Purchaser¿s Vehicle/labor Approx Weight: 50.953mt ( M.s-42.581 Mt, Ss-8.372 Mt) Sold On Number Basis Only Delivery In Cut Up Parts. Note:-if Any Non Ferrous Items Found In Cutting/delivery, Purchaser Should Be Handed Over To Railways. 05 Nos

Description: 03132412 0062 98110159 (01) (hsn Code: 72044900 - Gst 18% On Fcm Basis), Scrap Of Cond. & U/s. 8 Wheeler , Bcn M1.boxn M1 Wagons Available On Rails. 1) Ser Bcn M1 30078963938 .2.) Er Bcn M1 30028967955. 3) Ser Boxn M1 10079462166 4) Ser Bcn M1 30078761060 5) Er Bcn M1 30028965425 Location Road No.2 At Dump Yard. Rc Items:. 1.coupler Bodies (nt), 2.yokes 3.knuckles, 4.draft Gears,5.striker Castings (nt), 6.centre Pivots, 7. Casnub Bogies With All Fittings,8.wheel Set With Ctrb 9 .yoke Pin Support (1st Plate), 10 .safety Plate With Anchor Plate (2n D Plate), 11.yoke Support Plate(3rdplate),12.yoke Pin 13.draft Gear Follower 14. Knuckle Pin. 15. Bcn Swing. Ds8 No:0999603062 Dt:14.12.24. Note To Purchaser: Before Delivery Of Wagon Cut Off Parts, The Declared Rc Items Need To Be Handed Over By The Purchaser To Sse/scrap At Shop Floor By Transporting Through Purchaser¿s Vehicle/labor Approx Weight : Ms: 69.205 Mt Sold On Number Basis Only Delivery In Cut Up Parts. Note:-if Any Non Ferrous Items Found In Cutting/delivery, Purchaser Should Be Handed Over To Railways. 05 Nos

Description: 03132411 0049 98110159 (01) (hsn Code: 72044900 - Gst 18% On Fcm Basis), Scrap Ofcond. & U/s. 8 Wheeler , Bcn M1. Wagons Available On Rails. 1) Scr Bcn M1 30098961655,2) Ser Bcn M1 30078965444,3) Cr Bcn M1 30018962342,4) Er Bcn M1 30028761096,5) Cr Bcn M1 30018866121 Location Road No.1at Dump Yard. Rc Items:1.coupler Bodies (nt), 2.yokes 3.knuckles, 4.draft Gears, 5.striker Castings (nt), 6.centre Pivots, 7. Casnub Bogies With All Fittings,8.wheel Set With Ctrb9.yoke Pin Support (1st Plate), 10.safety Plate With Anchor Plate (2n D Plate), 11.yoke Support Plate(3rdplate),12.yoke Pin 13.draft Gear Follower 14 Knuck Pin.15.bcn Swing Ds8 No:0999603049 Dt:01.11.24.note To Purchaser: Before Delivery Of Wagon Cut Off Parts, The Declared Rc Items Need To Be Handed Over By The Purchaser To Sse/scrap At Shop Floor By Transporting Through Purchaser¿s Vehicle/labor Approx Weight: 72.907 Mt Sold On Number Basis Only Delivery In Cut Up Parts. Note:-if Any Non Ferrous Items Found In Cutting/delivery, Purchaser Should Be Handed Over To Railways. 05 Nos