Uniform Tenders

Details: Description:- A : Raising Of Pf :- Supplying And Fixing In Position Of Granite Platform Benches Made Of 100mm To 80mm Thick Single Piece Black Granite Slab Of Best Approved Quality, Colour Selected And Sorted For uniform Colour, Free From Any Damages, Cracks, Fissures And Flakes With Straight Edges And Perfect Corners, bench Each Of Size 2.0m Long And 0.45m To 0.40m Wide, Chamfered Machine Polished On Top And All Sides And machine Cut At Bottom, Supported On Two Number Of 100mm To 80mm Thick Black Granite Slab Of 0.50m X 0.45m To 0.40m Size With Semi Circular Cuts At Sides And Fully Polished On All Sides Above Platform Level Placed Vertically with 150mm Burried In Cement Concrete 1:3:6 Mix Below Platform Surface, Connecting The Top Slab And Supports rigidly In Trueplane And Level As Per Plan Listed, Finishing The Joints Perfectly With Contractor's Supply Of White / coloured Cement Suiltable For Granite Stone,properly Cured, Polishing Thrice With Carborundum Stones To Get Even shade And Fine Polish Including Demolition Of Cement Concrete Floor If Any, Earth Work Wherever Necessary, disposing Of All The Debris Away From The Site With All Labour, Materials Including Cement, Steel Etc., With All Lead, lift, Descent, Tools & Plants, Taxes, Duties, Loading, Conveyance, Unloading, Making Good The Disturbed Portion, incidental Charges Etc., Complete By The Contractor And As Directed By The Engineer In Charge.

Details: Lifting And Packing For Regrading The Existing Psc Sleeper Track To Required Height / level In Stages Not Exceeding 75mm Or Part Thereof At A Time, Providing Permissible Ramp For The track, Insertion Of Moorum / Sand / Stone Ballast Uniformly Under The Existing Track And Placing The same To Safe Approved Gradient, Gauge, Cushion Including Levelling And One Round Of Through Packing to Allow Train Movement At Restricted Speed Of 30 Kmph For A Specified Length With All Leads & Lifts and Fixing, Marking, Painting Rail Level Pegs At Every 30m Interval. Note: Lifting Of Track Shall Be Done in Stages As Per Procedure Prescribed In Latest Edition Of Irpwm To Get The Proposed Final Level As Per approved Working Profile, As Directed By Engineer In-charge.

Description: CATEGORY: M S HEXONAL BOLTS 16 X 65 MM F T , 3501520 M S HEXONAL BOLTS CONFORMING TO IS 1364 PART 1 and HEXAGONAL NUTS CONFORMING TO IS 1364 PART 3 HAVING MECHANICAL PROPERTY CLASS FOR BOLTS AS 4 point 6 AND NUTS AS 4 OF SIZE 12 X 75 MM F T , 3501522 M S HEXONAL BOLTS 16 X 50 MM F T , 3501528 M S HEXONAL BOLTS 16 X 75 MM F T , 3501530 M S HEXONAL BOLTS 10 X 50 MM F T , 3501531 M S HEXONAL BOLTS 10 X 65 MM F T , 3501532 M S HEXONAL BOLTS 10 X 100 MM F T , 3501543 M S HEX BOLT and NUTS FULL THREAD 20 X 100 MM , 3501544 M S HEX BOLT and NUTS FULL THREAD 12 X 100 MM , 3501099 M S HEXONAL BOLTS CONFORMING TO IS 1364 PART 1 and HEXAGONAL NUTS CONFORMING TO IS 1364 PART 3 HAVING MECHANICAL PROPERTY CLASS FOR BOLTS AS 4 point 6 AND NUTS AS 4 OF SIZE 6 X 25 MM F T , 3501002 M S HEXONAL BOLTS CONFORMING TO IS 1364 PART 1 and HEXAGONAL NUTS CONFORMING TO IS 1364 PART 3 HAVING MECHANICAL PROPERTY CLASS FOR BOLTS AS 4 point 6 AND NUTS AS 4 OF SIZE 6 X 50 MM F T , 3531010 M S HEXONAL BOLTS CONFORMING TO IS 1364 PART 1 and HEXAGONAL NUTS CONFORMING TO IS 1364 PART 3 HAVING MECHANICAL PROPERTY CLASS FOR BOLTS AS 4 point 6 AND NUTS AS 4 OF SIZE 9 X 200 MM H T , 3531011 M S HEXONAL BOLTS CONFORMING TO IS 1364 PART 1 and HEXAGONAL NUTS CONFORMING TO IS 1364 PART 3 HAVING MECHANICAL PROPERTY CLASS FOR BOLTS AS 4 point 6 AND NUTS AS 4 OF SIZE 16 X 175 MM H T , 3501553 M S HEXONAL BOLTS CONFORMING TO IS 1364 PART 1 and HEXAGONAL NUTS CONFORMING TO IS 1364 PART 3 HAVING MECHANICAL PROPERTY CLASS FOR BOLTS AS 4 point 6 AND NUTS AS 4 OF SIZE 16 X 200 MM H T , 3501111 M S HEXONAL BOLTS CONFORMING TO IS 1364 PART 1 and HEXAGONAL NUTS CONFORMING TO IS 1364 PART 3 HAVING MECHANICAL PROPERTY CLASS FOR BOLTS AS 4 point 6 AND NUTS AS 4 OF SIZE 12 X 175 MM H T , 3501550 M S HEX BOLT and NUTS 20 X 75 MM , 3522005 HEXAGONAL HEAD G I BOLT AS PER IS 1364 GI NUT AS PER IS 1367 HOT DIP GALVANISED AS PER IS 2629 WITH UNIFORM ZINC COATING OF SIZE 10 X 50 MM F T , 3522094 TW MAKE G I HEXAGONAL BOLT WITH NUTS M 20 X 100 MM HALF THREAD

Description: CATEGORY: Custom Bid for Services - Total Price for Minimum Wages including PF Overheads and Site Allowance Minimum 09 Out sourced skilled manpower services required per day Qty 24 Months Refer SCC SOW and ITB for detailed description and more details , Custom Bid for Services - Total price for Bonus or Exgratia at Eight point Three Three percentage of Minimum wages per month for 09 Manpower services Qty Lumpsum 1 Refer SCC SOW and ITB for detailed description and more details , Custom Bid for Services - Total price for ESI Employer Contribution at Three point Two five Percentage for 09 Manpower services Qty Lumpsum 1 Refer SCC SOW and ITB for detailed description and more details , Custom Bid for Services - Provision for Leave with Wages at Four point Eight One of minimum wages per month for 09 Manpower services Qty Lumpsum 1 Refer SCC SOW and ITB for detailed description and more details , Custom Bid for Services - Provision for premium for Group Personnel Accident Insurance Policy with a coverage of 5 Lakhs Qty Lumpsum 1 Refer SCC SOW and ITB for detailed description and more details , Custom Bid for Services - Premium for PMJJBY for 09 Manpower services Qty Lumpsum 1 Refer SCC SOW and ITB for detailed description and more details , Custom Bid for Services - Premium for PMSBY for 09 Manpower services Qty Lumpsum 1 Refer SCC SOW and ITB for detailed description and more details , Custom Bid for Services - Total price for Uniform cotton Other PPEs and safety gears for 09 Manpower services Qty Lumpsum 1 Refer SCC SOW and ITB for detailed description and more details , Custom Bid for Services - Total price for comprehensive maintenance Cost of HVAC System MCR 40Tx2 415V sub station 40Tx3 6 point 6KV sub station 40Tx3 Qty 24 months Refer SCC SOW and ITB for detailed description and more details , Custom Bid for Services - Total price for Comprehensive maintenance Cost of HVAC System 11KV sub station 7 point 5Tx3 Jetty sub station 5 point 5Tx4 FWPH SS7 point 5Tx3 Qty 24 months Refer SCC SOW and ITB for detailed description and more details , Custom Bid for Services - Total price for Comprehensive maintenance Cost of new HVAC System TLF 17 point 0TX2 Qty 24 months Refer SCC SOW and ITB for detailed description and more details , Custom Bid for Services - Total price for Comprehensive maintenance Cost of Flameproof Split or Window ACs installed at JCR 5Tx1 2Tx2 Jetty Substation 3Tx2 and Plant Lab 2Tx2 Qty 24 months Refer SCC SOW and ITB for detailed description and more detai.. , Custom Bid for Services - Total price for Comprehensive maintenance Cost of Split ACs 2T and 1point 5T installed at LNG plant TLF ECC building and LNG office Qty 24 months Refer SCC SOW and ITB for detailed description and more details

Details: Description:- Lifting And Packing For Regrading The Existing Psc Sleeper Track To Required Height / Level In Stages not Exceeding 75mm Or Part Thereof At A Time, Providing Permissible Ramp For The Track, Insertion Of Moorum / sand / Stone Ballast Uniformly Under The Existing Track And Placing The Same To Safe Approved Gradient, Gauge, cushion Including Levelling And One Round Of Through Packing To Allow Train Movement At Restricted Speed Of 30 kmph For A Specified Length With All Leads & Lifts And Fixing, Marking, Painting Rail Level Pegs At Every 30m Interval. note: Lifting Of Track Shall Be Done In Stages As Per Procedure Prescribed In Latest Edition Of Irpwm To Get The proposed Final Level As Per Approved Working Profile, As Directed By Engineer In-charge.

Details: Description:- Lifting And Packing For Regrading The Existing Psc Sleeper Track To Required Height / level In Stages Not Exceeding 75mm Or Part Thereof At A Time, Providing Permissible Ramp For The track, Insertion Of Moorum / Sand / Stone Ballast Uniformly Under The Existing Track And Placing The same To Safe Approved Gradient, Gauge, Cushion Including Levelling And One Round Of Through Packing to Allow Train Movement At Restricted Speed Of 30 Kmph For A Specified Length With All Leads & Lifts and Fixing, Marking, Painting Rail Level Pegs At Every 30m Interval. Note: Lifting Of Track Shall Be Done in Stages As Per Procedure Prescribed In Latest Edition Of Irpwm To Get The Proposed Final Level As Per approved Working Profile, As Directed By Engineer In-charge.

Description: CATEGORY: Rice Thin Mansoori , branded wheat flour , Arhar Dal Special , urad dal green , urad dal black , Steep Malka Masoor Dal , pea lentils , moong dal , horse gram , Beans , branded gram flour , rava branded , branded wheat porridge , sugar granule , Tea Leaf , Turmeric Ground , Coriander Ground , Red Chilli Ground , Vegetable Masala , Garam Masala , Chola Masala , cumin seeds , fenugreek , Celery , Sour Powder Chilli , Branded Asafoetida 100 grams , branded salt iodized , Soybean Nutella Branded , Mustard Oil , Refined Oil , Biscuit Sweet 10 KG Per Pack , Biscuit Namkeen 10 KG Per Pack , peanuts , Lai , sawdust , Khad gram , Chickpea , vermicelli branded , Gur , papad , Bundi , standing peas , Branded Pickle 05 kg , Rusk Branded Rava 12 Packets Per Cardboard , salty branded , roasted gram , mandarin branded , Sago , red chilli stands , Black Salt , Bay leaf , Lava Makhana , Camplan 1000 grams , Bournvita 1000 grams , Matchbox , scrubber , Dabur Amla Shanti Nihar Oil 100ml , Dettol Soap 125 g , Lifebuoy Soap 125g , Rin Soap Cake 250g , WHEEL SOAP CAKE 250 GM , Rin Powder , wheel powder , Toothpaste branded 100 grams , branded shampoo pouch , nicil powder 50 g , branded toothbrush , Ashok Robin Ujala Indigo Liquid 250 gm , vix small 05 ml , coconut oil 100 ml branded , Vaseline Branded 50 g , Phenyl Branded 05 L0 , Vimbar soap 500 g , Vimbar soap 250 g , pencil cell , Martin Coyle , Harpik 500 ml , flower broom , coconut broom , duster , Viper , mop , toilet brush , bucket 10liter plastic , mug plastic medium size , Hair Band Plastic Medium Size Black , rubber band black , Hawai Chappal Branded Size 5 No to 7 No , According to the standard set by the School Shoe Basic Education Council size from number 5 to number 7 for girl students , Stocking Small Medium Large Size , Under Garments Panties Luxe Roopa Medium Large Size , Under Garments Vest Lux Roopa Medium Large Size , comb medium size , Nail cutter , glass standard size , Jibhi for girl students , Girls Full Sleeved Night Suit Medium Large Small , exhaust fan 12 inch branded , battery water 5 liter pack , face mask , Ulen cap medium large size for girl students , Ulen Moza Medium Large Size for Girls , Ullen sweater medium large size for girl students , Girls Track Suit Medium Large Size , handkerchief medium large size , Medium Large Size With Dustbin Lid , Dustbin Without Lid Medium Large Size , Phenyl tablet 100 g , Acid 1000mL , School Uniform for medium large size girl students with dupatta as per the standard set by the Basic Education Council , Stabilizer for 5 KVA Single Phase Main Line , Inverter Battery 12V Microtek Luminous Exide , electronic weighing machine , bed sheet double bed , sheet single bed , Sports Shoes White Branded Size From 5 No To 7 No

Details: :computer Paper, Size- 15 Inch X 12 Inch 3 Part., 38.1 X 30.5 Cms., 70 Gsm, Is. No. 12766/97.2] Carbon Paper Quality- Base Paper Shall Be Type-a To Is9055/79 With Amendment 1. The Base Paper Shall Be Coated On One Side With Suitable Carbon Ink Necessary To Give The Required Manifolding Characteristics. The Coating Shall Be Smooth, Uniform And Free From Smudginess And Tendency To Separate As Flakes When Used. Mass Coating Shall Be 6 Plus 1 Gm/sq.m. Manifolding Characteristics [ Minimum No. Of Legible Carbon Copy] =1 No.3]perforation: Sprocket/round Holes On Both Sides And Free From Chips.4]monogram: Diameter-2.5 Cm. 5] Colour Scheme- 15 Inch X 12 Inch -3 Part The Monogram Of Indian Railway Should Be Printed At The Top Left Hand Corner Keeping 2.5 Cm Space From The Left Edge And 1.0 Cm From The Top Edge In Three Solid Colours Red, Yellow And Black. 6] Printing And Text Matter- A] The Name Of The Railway [in English] [s.e.railway] Should Be Printed At The Left Hand Bottom Corner Keeping 2.3 Cms Space From The Left Edge And 1.0 Cms From The Bottom Edge. The Size Of The Letters Should Be Of 18 Points. B] The Name Of The Railway [ In Hindi] Should Be Printed At The Right Hand Bottom Corner Keeping 2.3 Cms Space From The Right Edge And 1.0 Cms From The Bottom Edge. The Size Of The Letters Should Be Of 26 Points. C] The Printing Should Be Done Using Light Blue Ink. The Impression Should Be Faint But Legible

Details: Description:- Professional Housekeeping Of All Offices And Other Buildings And Premises And All Area including Orh & Subordinate Rest House,cpm Office Campus Including Dy Cee/c Campus Specified In theadditionalspecialconditionsbyprovidingmanpowercomprisingof Atleast7personnelfor cleaning Including Vacuum Cleaning, Sweeping, Mopping, Dusting Of Interiors And Exteriors Of All office Buildings And Office Chambers Including Floors, Walls, Ceilings, Doors And Windows, Corridors, staircases, Passages, Wash Basins, Toilets, Railings, Fixtures And Fittings, Lights, Fans, Gates, Parking area, Common Area Etc. Complete Strictly At Specified Timings And Frequencies As Specified In The additional Special Conditions By Employing All The Inputs, Procedure, Equipment, Tools, Cleaning agents, Liquid Soap,phenoil, Naphthalene Balls Etc. As Mentioned In The Additional Special Conditions of The Contract As Directed By The Engineer-in-charge Or His Representative.out Of 7 Personnels,2 personnels Shall Be Utilized For Day & Night Security Of The Campus. Contractor To Provide Overcoat dark Blue And Shoes To The Staff Deputed For The Work. Notes (i) Labour Laws And Minimum Wages As circulated By The Ministry Of Labour Should Be Followed And Payment To The Personnel Shall Be Made accordinglybythecontractor; (ii) The Contractor Shall Ensure To Maintain Adequate Number Of manpower At All Times And Also Maintain A Pool Of Suitable Standby Manpower For Deployment In case Of Rest And Relief To The Deployed Manpower.(iii) Contractor Has To Provide Two Set Of Uniform prescribedperyearalongwithphotoidentitycardandnamebadgewithoutfail. Note-non- deployment Of Minumum Personnel Will Lead To Penalty As Per Terms And Conditions. Professional housekeepingof All Area Of Orh & Subordinate Rest House Of Area 1085 Sqm( 2 Times A Day ). payment Will Be Made For 1085 Sqm/day Based On Actual Work Done. (note:- Item Unit To Be Read As per Sqm/ Day).

Details: Description:- Rehabilitation Of Existing Week Formation By Replacing Top Layers Of Existing Formation Only With mechanically Manufactured Blanketing Material Of Specified Formation Width And Thickness Under Traffic/power block Or Without Traffic Block By Blocking The Line For Longer Period By Diverting The Traffic Or Otherwise. The Item includes All Things Necessary To Complete The Work, All In Accordance With The Latest Applicable Specifications, guidelines, Manuals Instructions And Includes, More Particularly, And Without In Any Way Limiting The Generality Of liability To Complete The Work In All Respect E.g. (i) Dismantling/lifting Of Track Panel By Crane, (ii) Scooping Of Ballast from Track, Screening & Stacking Along Track (iii) Removal Of Top Layers Of Existing Formation Up To 550 Mm (iv) spreading Of Blanketing Material In Layers Not Exceeding In 30 Cm In Thickness In Loose Conditions, Leveling By motor Grader & Compacting By Vibro Roller Of Required Capacity Up To Specified Degree Of Compaction To Achieve A compacted Blanket Thickness Of 550 Mm & Finishing To Correct Profile. (v) Placing 4m Width Of Non-woven Needle punchedandmechanicallyorthermallybondedtypegeo-textilewithminimumstrengths In Grabtest, trapezoidal Tear Test And Puncture Test Of 1750n, 800 N And 5800 N Respectively (vi) Spreading New/screened ballast Layer Of 200mm Uniform Thickness Over It And Compaction By Rollers (vii) Linking Of Track Panels With Crane and Connecting At Both Ends, Initial Packing And Leveling (viii) Screening Of Scooped Ballast, Stacking And Using The same At The Same Location Or Adjacent Location Along With Additional Ballast To Provide Specified Cushion And profile (ix) Disposal Of Waste Material At Nominated Place (x) All Pre And Post Attention During Required Nos. Of machine Tamping (xi) Removal Of Service Rails With Rail Panel And De-stressing Of Track After Final Packing & surfacing And All Other Incidental Works Required To Complete The Work In All Respect. Under Traffic Block