Tiruchirappalli Tender Results

CATEGORY: Monthly Basis Cab & Taxi Hiring Services - SUV; 3500 km; Local

CATEGORY: Exhaust fan for non capacitor type

CATEGORY: XLPE Cable for Working Voltages up to and Including 1.1 KV as per IS 7098 (Part 1) (Q2)

CATEGORY: XLPE Cable for Working Voltages up to and Including 1.1 KV as per IS 7098 (Part 1) (Q2)

CATEGORY: Custom Bid for Services - Assisting in Tools assembly and cleaning in Hot Mill and Cold Mill Tool Engineering at SSTP BHEL Trichy

CATEGORY: Armature (Part No: 31343350230) , Carbon Brush (Part No: 34343350190) , Switch (Part No: 31343312020)

CATEGORY: 920054400000-UN MACHINED BEARING LEVER AS PER DRG.3-45-836-00015 REV 01 AND SPECIFICATION ASTM A297 GR HH , 920055910100-UN MACHINED LEVER MAIN TILT VAR 01 AS PER DRAWING 3-45-000-01433 REV 02 AND TDC 0435 REV 00 SPECIFICATION ASTM A27 Gr 65-35 WITH RADIOGRAPHY TEST , 920055920100-UN MACHINED LEVER MAIN TILT VAR 02 AS PER DRAWING 3-45-000-01433 REV 02 AND SPECIFICATION A27 GR65-35 AND TDC 435 REV 00 - WITH RADIOGRAPHY TEST , 920055930100-UN MACHINED LEVER MAIN TILT DRIVE MECH AS PER DRAWING 3-45-000- 01159 AND SPECIFICATION A27GR65-35 AND TDC 435 REV 00 -WITH RADIOGRAPHY TEST , 920055940100-UN MACHINED LEVER INT BELL CRANK VAR01 AS PER DRAWING 3-45-000-01434 REV 01 AND SPECIFICATION A27GR65-35 AND TDC 435 REV 00 -WITH RADIOGRAPHY TEST , 920055970200-UN MACHINED RODENDCLEVIS SMALL VAR 01 AS PER DRAWING 4-45-000-01482 REV 01 AND SPECIFICATION A216GrWCA , 920055980200-UN MACHINED ROD END CLEVIS SMALL VAR 02 AS PER DRAWING 4-45- 000-01482 REV 01 AND SPECIFICATION A216GRWCA , 920055990200-UN MACHINED ROD END CLEVIS LARGE VAR 01 AS PER DRAWING 3-45-000-01156 REV 02 AND SPECIFICATION A216GRWCA , 920056030200-UN MACHINED NOZZLE TIP SUPPORT BLOCK AS PER DRAWING 4-45-000-01481 REV 01 AND SPECIFICATION SA351- 18CR8NI , 920056040200-UN MACHINED NOZZLE TIP SUPPORT BLOCK CAP AS PER DRAWING 4-45-000-01480 REV 01 AND SPECIFICATION A351-18CR8NI , 920056200000-UN MACHINED DIFFUSER CONE EXTN LEVER AS PER DRG.4-41-350-00877 REV 07 AND SPECIFICATION SA216 GR WCA , 920131830000-UN MACHINED SUPPORT LUG AS PER DRG.6112-2042-21 VAR.01 REV.02 AND SPECIFICATION SA351GRCH20 , 920131840000-UN MACHINED SPACER LUG AS PER DRG.6112-2041-21 VAR.01 REV.02 AND SPECIFICATION SA351GRCH20 , 920132940000-UN MACHINED CLAMP CASTING AS PER DRG.3-41-000-00342 REV 00 AND SPECIFICATION SA 216 WCA , 920400010000-UN MACHINED PIN CONNECTING LUG AS PER DRAWING 3-45-000-01655 REV 00 AND SPECIFICATION SA351-18CR8NI , 920401900000-UN MACHINED PIN CONNECTING LUG DIA 13 MM HOLE AS PER DRG.4-45-836-00047 REV 02 AND SPECIFICATION ASTM A297GRHH , 920404830000-UN MACHINED PIN CONNECTING LUG AS PER DRAWING 3-45-000-01158 REV 00 AND SPECIFICATION SA351-18CR8NI , 920510040000-UN MACHINED DIFFUSER DISK CASTING AS PER DRAWING 3-41- 125-00116 REV 04 AND SPECIFICATION A560-50CR50NICB , 920510230000-UN MACHINED 3 BY 8 INCH FEMALE CONNECTOR AS PER DRG.4-11-395-00503 REV.00 AND SPECIFICATION SA351GRCH20 , 920510800000-UN MACHINED 3 BY 8 INCH MALE CONNECTOR AS PER DRG.3- 11-078-04450 REV.03 AND SPECIFICATION SA351CK20 , 920510810000-UN MACHINED 3 BY 8 INCH FEMALE CONNECTOR AS PER DRG.3-11-078-04451 REV.01 AND SPECIFICATION SA351CK20 , 920510820000-UN MACHINED FLEXIBLE TIE 76.2 MM AS PER DRG.3-11-078-04460 REV.01 AND SPECIFICATION SA351CK20 , 920510830000-UN MACHINED DIFFUSER DISC AS PER DRAWING 4-45-000- 01470 REV 00 AND SPECIFICATION A560-GR50CR50NICB

CATEGORY: Manpower Outsourcing Services - Minimum wage - Unskilled; Not Required; Others

CATEGORY: Operation And Maintenance Of Electro-Mechanical Installations - Complete System

CATEGORY: 160061280000_DIA 110X40 , 160132670000_REV STOP SW ARM , 160133060000_GEAR BLANK CASTING PROOF MACHINED , 160133070000_BUSHING , 160133080000_GLAND , 160133990000_GLAND , 160134070000_BUSHING FOR T C , 160134080000_BUSHING , 160134100000_BEARING , 160134200000_BUSHING , 160240300000_CASTBAR D36 300 , 160240310000_DIA 50X250 , 920134030000_REV SWITCH LEVER