Machinery And Tools Tenders in Telangana

Manufacture And Supply Of T5 And T2 Fin Assembly

CATEGORY: SS Studs and Lock Washers , Anchors for Monomax/Monolane Blankets

Tggenco-ktps Vii Stage/paloncha - Supply Of Solenoid Valves And Pressure Gauges

CATEGORY: Shims for Left Hand Side Pad LHS of Generator Bearing as per Sketch No.3 Varient 1 Thickness 0.03 mm , Shims for Left Hand Side Pad LHS of Generator Bearing as per Sketch No.3 Varient 2 Thickness 0.05 mm , Shims for Left Hand Side Pad LHS of Generator Bearing as per Sketch No.3 Varient 3 Thickness 0.10 mm , Shims for Left Hand Side Pad LHS of Generator Bearing as per Sketch No.3 Varient 4 Thickness 0.20 mm , Shims for Left Hand Side Pad LHS of Generator Bearing as per Sketch No.3 Varient 5 Thickness 0.25 mm , Shims for Left Hand Side Pad LHS of Generator Bearing as per Sketch No.3 Varient 6 Thickness 0.40 mm , Shims for Left Hand Side Pad LHS of Generator Bearing as per Sketch No.3 Varient 7 Thickness 0.50 mm , Shims for Left Hand Side Pad LHS of Generator Bearing as per Sketch No.3 Varient 8 Thickness 0.75 mm , Shims for Left Hand Side Pad LHS of Generator Bearing as per Sketch No.3 Varient 9 Thickness 1.00 mm , Shims for Left Hand Side Pad LHS of Generator Bearing As per Sketch No.3 Varient 10 Thickness 2.00 mm , Shims for Right Hand Side Pad RHS of Generator Bearing as per Sketch No.4 Varient 1 Thickness 0.03 mm , Shims for Right Hand Side Pad RHS of Generator Bearing as per Sketch No.4 Varient 2 Thickness 0.05 mm , Shims for Right Hand Side Pad RHS of Generator Bearing as per Sketch No.4 Varient 3 Thickness 0.10 mm , Shims for Right Hand Side Pad RHS of Generator Bearing as per Sketch No.4 Varient 4 Thickness 0.20 mm , Shims for Right Hand Side Pad RHS of Generator Bearing as per Sketch No.4 Varient 5 Thickness 0.25 mm , Shims for Right Hand Side Pad RHS of Generator Bearing as per Sketch No.4 Varient 6 Thickness 0.40 mm , Shims for Right Hand Side Pad RHS of Generator Bearing as per Sketch No.4 Varient 7 Thickness 0.50 mm , Shims for Right Hand Side Pad RHS of Generator Bearing as per Sketch No.4 Varient 8 Thickness 0.75 mm , Shims for Right Hand Side Pad RHS of Generator Bearing as per Sketch No.4 Varient 9 Thickness 1.00 mm , Shims for Right Hand Side Pad RHS of Generator Bearing as per Sketch No.4 Varient 10 Thickness 2.00 mm , Shims for Brackets of TFJB and TRJB as per Sketch No.5 Varient 1 Thickness 0.03 mm , Shims for Brackets of TFJB and TRJB as per Sketch No.5 Varient 2 Thickness 0.05 mm , Shims for Brackets of TFJB and TRJB as per Sketch No.5 Varient 3 Thickness 0.10 mm , Shims for Brackets of TFJB and TRJB as per Sketch No.5 Varient 4 Thickness 0.20 mm , Shims for Brackets of TFJB and TRJB as per Sketch No.5 Varient 5 Thickness 0.25 mm , Shims for Brackets of TFJB and TRJB as per Sketch No.5 Varient 6 Thickness 0.40 mm , Shims for Brackets of TFJB and TRJB as per Sketch No.5 Varient 7 Thickness 0.50 mm , Shims for Brackets of TFJB and TRJB as per Sketch No.5 Varient 8 Thickness 0.75 mm , Shims for Brackets of TFJB and TRJB as per Sketch No.5 Varient 9 Thickness 1.00 mm , Shims for Brackets of TFJB and TRJB as per Sketch No.5 Varient 10 Thickness 2.00 mm

O Rings For One 25 Kv Vaccum Interrupter.

Annual Desilting Of Sw Drain With Bucket Cleaning Machine In 50- Begumbazar Division Under Division-14,kz, Ghmc For The Year 2025 (rs.3.60lakhs) (recall)

Bm-bending Fabrication And Erection Of The Damaged Worn Out Portion Replacement Of Guide Vanes For Flue Gas Ducts Of Unit Ix During Overhaul Of Unit Ix.

Hydraulically Regulated Universal Door Closer, Tubular Type (type B, Size 2 As Per Is: 3564/1995) Conforming To Icf Specification No. Icf/md/spec-149, Issue Status-01, Rev-01.

Supply Of Fasteners For Reflector Assembly

O And M - Musi Project - Removal, Supply And Fixing Of Rubber Seals For All Regulatory Gates, Removal, Supply And Fixing Of Wire Ropes For Regulatory Gate No.6 , 7 For Crest Gate No.5, Welding Of Damaged Lifting Brackets And Replacing Damaged Roller Cage Plates Of Musi Project In Suryapet District (3rd Call).