Telangana Tenders

Machining Of Rotor As Per Bhel Drawings And Scope Of Work

CATEGORY: Drawing Sheet , Cutting Wheel 4 inch , Cutting Wheel 14 inch , Grinding Wheel 4 inch , Buffing Wheel 4 inch Steel , Buffing Wheel 4 inch cotton , Hacksaw Blade 2 side 1 inch , Angle 3mm , Square Pipe 2mm , Flat Patti 3mm , Round Pipe 2mm , MS Sheet 18 gauge , MS Plate 6mm , Armr Plate 15mm , MS Sheet 24 gauge , MS Sheet 22 gauge , CGI Sheet Corrugated , Armr Rod Electrode , Welding Rod E 6013 , Tungsten Electrode Green , Tungsten Electrode Red , TIG Welding Torch Nozzle Kit , Refilling of Oxygen Gas , Refilling of Acetylene Gas 3CB , MS Copper Coated Filler Rod , Brass Filler Rod 1mm , Copper Filler Rod 2mm , Bronze Flux Powder , Copper Pipe Half Inches , Solder Soft , Zinc Chloric Acid , Zinc Sheet , Kerosine , Coal , Round Bar 12mm , MS Plate 1 inch , Pop Rivets 1 point 5 inch , Snap Rivets , A4 Sheet 75 GSM , J Hook 2 inch with nut and washer , Moulding Sand , Alluminium , Graphite Crucible , Drill Bits 2mm to 13mm

8 Mtrs/140 Kgs Pscc Poles

CATEGORY: Precision Height Gauge (Q3)

Supply And Fixing Of Motor With All Accessories At East Gandhi Nagar Sump In Ward No.15 In Nagaram Municipality Under Municipal General Funds 2024-25

Aluminium Step Ladder 16 Feet Height.the Stiles Of The Ladder Should Be Made Of Alu-c-sections While The Steps Made Of Heavy Duty Aluminum Non-slippery.the Top And Bottom End Are Fitted With Rubber.steps Must Be Strong Enough To Support At A Time Weight Of 01 Men (80kg Total)with Warranty As Per Is4571/1977 Or Latest

Supply, Installation And Commissioning Of Single Car Test Rig.

Dg Set Servicing And Repair

Finish Machining Of Lp Moving Blades With Bhel Free Issue Flat Material

Supply Of Spare Motors To Devasthanam On The Occasion Of Mahashivarathri Jathara Festival, 2025