Tamil Nadu Tenders

Cond. & U/s Wheel Tyre Lathe Borings And Turnings In As Is Where Is Condition. Pl No 98050102. Custodian: Sse/c&w/jtj; Ds8 No:233109 Dated 16.04.2025 Note: Loading Permitted Through Jcb.

Cond. U.s Weighment Cl.iii- Cut Rails 60 Kg-625.73mtrs, Cut Rails 52kg - 6.05mtrs, Cut Rails 75r - 0.11mtrs, Cut Rails 75bh - 1.04mtrs, Cut Rails - 80bh - 0.49mtrs Qty-38.133 Mts. Ds8 No. 297650 Dt. 29.03.2025. Note- I]delivery To Be Made On Actual Weighment Basis. Ii]when Crane Loading Is Not Possible, The Purchaser [by Engaging His Own Labourers] Is Permitted To Cut Rails To Loadable Sizes Of Not Less Than 150 Kgs. Iii.] Purchaser [by Engaging His Own Labourers] Is Permitted To Cut Rails And Hand Over The Excess Quantity To The Custodian. Nfs- As Per Tms /ds8 Uploaded In Tms. Any Other Attachment To Be Cut And Hand Over To Custodian. Any Other Nfs Material In The Lot Other Than The Items Earmarked For Sale Should Be Handed Over To Custodian At The Time Of Delivery. Location -sse/p.way/tbm Office Near To Blacksmith Shed In Sse/pway/tambaram Section.

Traction Motor Cleat Arrgt Col-i

Cond. U.s Cl.iii Rails 60kg - 312.43, Rails 52kg - 5.13mtrs, Qty- 19.118mts. Ds8 No.296566 Dt.09.01.2025. Note- Delivery To Be Made On Linear Measurement Basis. When Scrap Rails For Delivery On Sectional Weight Basis Are Longer Than Five Metres, To Facilitate Loading, Purchasers [by Engaging His Own Labourers] Are Permitted To Cut The Rails To Convenient Lengths Of Not Less Than 2.5 Metres. Nfs- As Per Tms /ds8 Uploaded In Tms. Any Other Attachment To Be Cut And Hand Over To Custodian. Any Other Nfs Material In The Lot Other Than The Items Earmarked For Sale Should Be Handed Over To Custodian At The Time Of Delivery. Location- Post No 7/27c - 7/27a In Sse/pw/tvt Section.

P.l. No. 98090719 Condemned And Unserviceable Stainless Steel Scrap Consisting Of Full / Broken / Parts / Dismantled Bio-toilet Tanks Guard Van Type (big) - 54 Nos From Icf/ Lhb Coaches Of Sorts And Sizes, With / Without Ball Valve, S Traps , P Traps , Top Cover , Clamp , Stainless Steel Chlorinator Unit / Sediments / Water / Other Attachments. Total - 54 Nos., Weight - 7500 Kgs Approximately. Average Wt Of One Number Is 138.89 Kg Approximately (stainless Steel Only). Removal Of Waste, Water And Sediments Not Permitted. As Is Where Is Basis. Rate Per Number Should Be Quoted.delivery Should Be Given In Numbers Only. Loading By Crane Is Permitted

Condemned Bg- 8 Wheeler Wagons- With All Available Fittings There On But Excluding The Following Reclaimable Items - 1) Casnub Bogies Complete Set With Bolster Assembly With Brake Gear Items Complete Set ,2)wheel Set Complete With Axle,axle Box And Roller Bearing Assembly Complete Set-, 3)center Buffer Coupler Body Assembly Without Draft-gear & Yoke, 4) Pull Rod Roller With Bracket,5) Air Hose Pipes (bp&fp) With Cut Off Angle Cock,6) Hand Brake Pull Rod,7) Load Empty Device Complete Set,8)air Hose Carrier. 6 Wagons, Ds8 No: 233114 Dt: 24.06.2025. Pl.no.98110159. Location: Jtj/yard. Custodian: Sse - C And W - Jtj. Remark:1) Rc Items To Be Handed Over To The Custodian At Specified Location Before Final Delivery-stores Section /c&w/jtj. (2) Cutting Permitted To Loadable Size Only. (3) Crane Loading Permitted. (4) Purchaser Should Take Safety Precaution While Cutting Of Wagons.(5) At The Time Of Delivery All Items Including Zero Value Items Such As Rexene, Rubber, Frp Etc., Should Be Removed And Cleared By The Purchaser From Railway Premises And Should Be Disposed As Per The Existing Norms Of Central/state Government.

Push Pull Rod For Wap-5 Loco

Set Of Cable Lugs (consisting Of 6 Items As Per Enclosed Annexure)

Condemned Bg-8 Wheeler Wagons- With All Available Fittings There On But Excluding The Following Reclaimable Items - 1)casnub Bogie Complete Set With Bolster Assembly With Brake Gear Items Complete Set , 2)wheel Set Complete With Axle,axle Box And Roller Bearing Assembly Complete Set-, 3)centre Buffer Coupler Body Assembly Complete Set, 4)disributer Valve, 5)draft Gear. 5 Wagons. Ds8 No:232828 Dt: 21-05-25. Location: Tondiarpet Marshalling Yard. Custodian: Sse - C And W - Tnpm. Pl.no.98110159. Remarks:1) Rc Items To Be Handed Over To The Custodian In The Specified Location Before Final Delivery-stores Section /c&w/tnpm. (2) Cutting Permitted To Loadable Size Only. (3) Crane Loading Permitted. (4) Purchaser Should Take Safety Precaution While Cutting Of Wagons. (5) At The Time Of Delivery All Items Including Zero Value Items Such As Rexene, Rubber, Frp Etc., Should Be Removed And Cleared By Purchaser From Railway Premises And Should Be Disposed As Per The Existing Norms Of Central/state Government.

25560578 cam Shaft Complete To M/s. Repl Part No. A5150 Or To Rdso Drg No. Skel 4613 [ Warr anty Period: 30 Months After The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitt ed: Max 8 Lacs ] ] consignee Dy.cmm/lsd/per, Sr Tamil Nadu 7.00 Numbers uvam Item Ref. ( Item Id :- 2101075 - Cam Shaft Complete )