Steel Tenders

Description: Scrap Released Spiral Steel Turning Boring Material.

Description: Sc. Cut Off Parts Of Accidental Involved Cond. Wagon, Type- Boxnhl [stainless Steel Body], 1] Wcr 22161065162. Condition-sold Without Excluded Fittings As Available Vide Crse-er-kkk Letter No.mc-300-pt.-xviii Dt.26.08.14, List Of Excluded Fittings Are As Follows, 1] Casnub Bogie, 2] Wheel Set With Ctrb, 3] Brake Cylinder, 4] Draft Gear 5] Coupler Body, 6] Yoke And Yoke Pin, 7] Distributor Valve, 8] Yoke Support Plate, 9] Yoke Pin Support Plate, 10] All Sorts Of Bolster Spring, 11] Slack Adjustor [sab], 12] Hand Brake Wheel, 13] Knuckle, 14] Anchor Plate With Safety Plate, 15] Brake Beam Complete For Casnub Bogie, 16] Equalising Lever With Bushes, 17] Bogie Brake Push Rod, 18] Apm. Cutting Allowed. Please Check Special Condition And Detailed Conditions / Amendments / Modifications If Any In Depot Condition Before Bidding.

Description: Total Qty:251 Nos 5.835 Approx Mt Description:1 Ferrous Scrap 1) U/s & Scrap Bogie Coil Spring Ng (alloy Steel) 53 Nos 901 Kg 2) U/s & Scrap Bevel Gear (inner) (alloy Steel)12 Nos 300 Kg 3)u/s & Scrap Bevel Gear (outer) (alloy Steel) 5 Nos 85 Kg 4) U/s & Scrap Break Block Ng (cast Iron)49 No 441 Kgs 5) U/s & Scrap Break Cylinder Ng (mild Steel) 48 Nos 96 Kgs 6) U/s & Scrap Axle Box Ng (mild Steel) 12 Nos 312 Kgs 7) U/s & Scrap Compressor Liner Bg (mild Steel) 20 Nos 800 Kgs 8) U/s & Scrap Cylinder Head Ng (alloy Steel)1.00 Nos 80 Kgs 9) U/s & Scrap Cylinder Liner Bg (mild Steel)45.00 Nos 2070 Kgs 10) U/s & Scrap Cardon Shaft Ng(alloy Steel) 6.00 Nos 750 Kgs

Description: CATEGORY: 1700000002 WELDING ELECTRODE MILD STEEL 4MM , 1700000347 WELDING ELECTRODE MILD STEEL 315MM , 1700000348 WELDING ELECTRODE LOW HYD MILD STEEL 5MM , 1700005063 MS ELECTRODE 500 X 450 MM , 1700005064 LOW HYDROGEN MS ELECTRODES 315 , 1700005065 CHAMPERING ELECTRODE 315MM , 1700005067 HARD FACING ELECTRODES 315 MM , 1700005068 ELECTRODE BRONZ ROD 400MM , 1700005069 SS ELECTRODE 315MM , 1700005071 BRONZE ROD 200MM , 1700005080 GAS WELDING ROD COPPER 2MM , 1700006100 LOW HYDROGEN MS ELECTRODES 4MM , 1700006553 WELDING ELECTRODE 4 X 350 450 MM , 1700007467 CUTTING ELECTRODE 4MM , 1700010236 SS ELECTRODE 400MM PN , 1700010393 CAST IRON ELECTRODE 315MM , 1700010394 CAST IRON ELECTRODE 400MM , 1700010395 SS ELECTRODE 500MM , 1700010422 HARD FACING ELECTRODE 400MM , 1700005066 CHAMPERING ELECTRODE 500MM

Description: S S Water Tanks - 98090719(13)cond.& U/s Stainless Steel Scrap Of Under Slung Tanks, Ss Solar Water Tanks, S S Water Tanks Of Different Sorts And Sizes With 5% Ms Attachments, Note:1)delivery On Actual Weighment Basis Only. Hsn Code:72042190.gst@18% On Forward Charge Basis. Location: Ferrous Yard Bin No: J - 3.

Description: Stainless Steel Nut & Bolt With Washer & Lock Nut Size 10 X 65 X 30 Mm Confirming To Rdso Specification No. Ti/spc/ohe/fasteners/0120rev-1(march- 2017) Or Latest.

Description: Design, Engineering, Manufacture, Fabrication /assembly, Inspection, Shop Testing, Painting Atmanufacturer_s Shop, Packing, Loading Andtransportation, Supply For Site, Supervision Oferection, Testing And Commissioning Along Withproviding One-year Amc Of One _1_ No. Ofpassenger Lift Complete With Their Electrical Andautomation Equipment And Standard Accessorieswith Attachments, For Up_gradation Of Blastfurnace No. 3 At Sail, Durgapur Steel Plant

Description: 12104ms24b, 98050011, Quantity- 31.115 Mts. Scrap Condemned Unserviceable Ms Shock Absorbers, Ms Dampers, Primary Dampers, Secondary Dampers, Centring Devices, Hydraulic Dampers, Axle Dampers, Vertical Dampers, Horizontal Dampers, Yaw Dampers, Damper Spares Of Carriage And Wagon And Loco Items Of Sorts And Sizes, Full Or Dismantled With Or Without Oil And Other Attachments Of Stainless Steel, Rubber, Fiber And Nylon Bushes. Approx Gross Weight- 31115 Kgs. Approx Mild Steel[ms] Weight- 28069.16 Kgs. Approx Stainless Steel[ss] Weight- 1269.44 Kgs. Approx Rubber Weight- 945.66 Kgs. Approx Oil Weight- 830.74 Kgs. Location- Bin No- 104, Right Side Of Road No-1. Hsn Code- 72044900. Gst- 18 Percent. Note- Delivery On Actual Weighment Basis Only. Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery

Description: Scrap Ferrous Melting & Light Melting Consisting Of Coach Cutting, Doors ,window & Seat Bearth Frame,tree Gaurd, Battery Box, M.s.& G.i.pipes & Pipe Fitting, M.s.& G.i.sheets ( Plane / Corrugated), G.i.duct,brake Beams, Gear Case, Protective Tube, Lower Spring - Seat,side Frame & Brake Shoe Key,nut, Bolt,pin, Washer, Ring, Thin Helical Spring Up To Three Coil, Brocken Helical Spring Up To Single Coil,locking- Plate, Dust Sheild Spring,cut Up & Damage - Drums Of Sorts & Sizes,filter,wire & Wire Rope, Expanded Metal, Wire Mesh,fabricated Structure, Dummy / Box, Empty Electric Panel, Sig. Pole, Etd Pully Frame, Tirfor,rachet,chain Pull Lift, Shock Absorver,damper, Slack Adjuster, Bucket, Rack ,almirah, Dismental Frame Of Chair & Table, Empty Fire Extingure, Cut Pcs.of Sig. Location Box,moulding Frame,phinolex Pipe,u- Type Bracket, Foot Rest Plate, Foot Step, Fan Housing & Cage, Eq Stay, Bmbc Cover, Plane & Twiste Bar, Pipe& Tie Bar Fencing, Phawarh, Rake Ballast,wire Clawn, Dust Cart, Spaner,silent Block,pan,wire Basket, & Other Various Released Items From Loco, Carriage, Sig. Trd. P.way,electric,of Sorts & Sizes Fit For Melting &light Melting With Steel, C.i.& Neg.n.f.attachment If Any. Note- 1- L.b.p. 2- Cutting & Digging Allowed For Loading Purpose.3-days Alloted For Cutting And Digging -eight Days And At The Time Of Delivery 4- Other Than Melting & Light Melting Items If Found During ,digging & Cutting Will Be Seperated & Not To Be Delivered To Purchaser. Location: Lying Between L/n-9 & Road Near N.f.godown In Plot

Description: Scrap Class Iii Released Unserviceable 60 Kg Mbc Sleeper (minor Broken/crack Mixed) Qty. 5991 Nos. 89.865 Mts Tms Lot No. Bpl/askn/pw/scrap 2024-25/72 Note: 1.delivery Given By Numbers. 2.handover Is Allowed For Breaking After Breaking The Sleepers Debris Should Be Cleared By The Purchase & Thereafter The Delivery Of Released Steel Wire & Inserts Will Be Effected. 3.it Is Strictly Advice To The Bidder To See The Lot And Loading Point Personally Before Bidding The Lot In E-auction. No Claim Will Be Entertained After Sale Of The Lot. 4. After Joint Lot Inspection, If Any Addition, Deletion, Alteration & Variation Comes In The Lot, Stock Holder Will Be Fully Responsible. 5.buyer Should Visit The Site Before Bidding. 6.the Purchaser Will Be Fully Responsible For The Safety Of His Labour And Other Staff In Railway Premises. 7. The Purchaser Will Be Fully Responsible For Any Loss Or Damage To Any Other Railway Property/facility, Equipment, Weather Due To His Negligence Or Otherwise During Breaking The Sleepers And Delivery. 8.similar And Other Type Of P.way Materials Laying Near By Lot Will Not Be Delivered. 9.material Can Be Moved By Road Within A Lead Of 30 Mtrs From Stacking Point.