Software Tenders
Software Technology Parks Of India - STPI Tender
Goods
Software and IT Solutions
GEM
Lucknow, Uttar Pradesh
Purchaser Name: Software Technology Parks Of India | CATEGORY: High End Laptop - Notebook (Q2)
Closing Date11 Jul 2025
Tender AmountRefer Documents
North Central Railway - NCR Tender
Works
Civil And Construction...+2Consultancy Services, Civil And Architectural Services
Ireps
Kanpur Nagar - Uttar Pradesh, Kanpur Nagar - Uttar Pradesh
Details: Description:- Conducting Final Location Survey (fls) For Broad Gauge Railway Line Along The Existing
line With Consultant's Own Labour, Tools, Plants & Equipment, Materials, Transportation With All Lead
and Lifts, Duly Taking All Safety Precautions To Ensure Safety, Using Survey Instruments Like Total
stations, Dgps, Auto Levels Etc And Using Mx Rail Software As Per The Scope, Terms Of Reference,
relevant Provisions Of Indian Railways Code For Engineering Department (1999, Third Reprint) With Up
to Date Correction Slips, Special Conditions Of Tender And As Directed By The Engineer-in-charge,
including Topographical Survey For 25metre Corridor On Proposed Alignment Side Of Center Line Of
existing Track Or On Both Sides Of Proposed Alignment At Diverted Alignment Or Adequate Width In
station Yards As The Case May Be, Taking The Longitudinal Levels At Intervals Of 20 M. & At Obligatory
points And Cross Sectional Levels At An Interval Of 5m ( Or Less As Decided By Engineer In Charge As
per The Terrain) ( Extra Width To Be Covered At Some Locations As Directed By Engineer -in- Charge),
including Staking Of Approved Alignment With Cc Pillars (150x150x900mm Size With 300mm Projected
above Ground Level) At An Interval Of 100m And With Wooden Pags ( 50x50x450mrn Size) At Every
20m Where Track Is Not Parallel Or Is Away From The Existing Track By More Than 15 M (cost Of Wooden
pags In Inclusive).the Rcc Pillars Shall Also Be Fixed On Curves Indicating Transition Portion, Apex
point, Crown Of Curve, Beginning And End Point Of Circular Curves, (5 Locations For Each Curve), At
major Bridges Two Posts One On Either Side (payment For Cc Pillars Will Be Made Separately As Per
item 2 Of Schedule), Including Submitting List Of Distance And Coordinates Of Centre Line Of Proposed
bg Line From Centre Line Of Existing Bg Line At Every 20m Interval. The Rate Also Includes Preparation
and Submission Of Report Of Final Location Survey (fls) Printed & Duly Bound (2 Sets) And With Two
soft Copy In Cd. Note : Detailed Project Report (dpr) Should Be Prepared As Per Railway Board Letter
no. 2022/w-1/gen/dpr Proforma
Closing Date26 May 2025
Tender Amount₹ 27.5 Lac
Airports Authority Of India - AAI Tender
Goods
Electrical Goods and Equipments...+1Electrical and Electronics
GEM
Corrigendum : Corrigendum Added
Visakhapatnam, Andhra Pradesh
Details: CATEGORY: IP Based 40KVA ModularUPS , Battery Banks with Battery
stand accessories , BMS for 40KVA UPS , IP Based 10KVA
Online Conventional UPS , Battery Banks with Battery stand
and accessories for 10 KVA UPS , BMS for 10 KVA UPS , 3
Phase Automatic Transfer Switches , K13 Isolation
Transformer for 40KVA UPS , K13 Isolation Transformer for
10 kVA , 6 Sq mm , 4 core Power Cable armored , 6 Sq mm ,
3 core Power Cable armored , 2.5 Sq mm,3 core Power
Cable armored , 10 Sq mm,4 core Power cable armored , 10
Sq mm,1 core Earthing cable , 3 Phase Power logger , 3
Phase detector and Corrector , 3 Phase Energy meter ,
Three Phase Series Filter with bypass supply , Three Phase
SPD type II , 100A type C MCB 4 pole , 63A type C MCB, 4
pole , 32 A TYPE C MCB, 4 pole , 32 A TYPE C MCB, 2 pole ,
16A MCB , 48 Way DB , 12 Way DB , 6 Module Gang box
with 16 or 5 Amp Switch Sockets , 49 inch Table or Wall
mountable Display , Work station , Rack Server , NETWORK
TIMING PROTOCOL Servers , Laptop , Central Monitoring
Control System CMS software , 24 port L2 Network Switch
with RACKS , Single Mode, 12 Core OFC cable , CAT 6 UTP
Cable , Media Convertors , 2 inch Flexible Metal conduit , 1
inch PVC Casing Pipes , Half inch PVC Casing Pipes ,
Training, Documentation and Manuals , Digital Multimeter ,
Earth Resistance meter , Battery Internal resistance meter ,
Relevant screw driver set , Relevant Torque Wench Set ,
Laying of armored 6 Sqm Power Cable both 4 core , 3 core ,
Laying of Armored Two and Half Sqm Power Cable , Laying
of Armored 10 Sqm 4 core Power Cable , Laying of Armored
10 Sqm 1 core earthing Cable , Laying of Cat 6 UTP Cable ,
Laying of OFC CABLE , Installation and Integration charges
Closing DateCancelled
Tender Amount₹ 5.4 Cr
Department Of Agriculture Tender
Goods
Machinery and Tools
GEM
Banda, Uttar Pradesh
Details: CATEGORY: Media sand filter 50M 3 hr , Hydrocyclone filter 50M3 Hr ,
Disc filter 50M3 hr , Air release valve 1 , Pressure
gaugeGlycerin filled 2 dial , PVC Non Return Valve 3 , PVC
control valve 90 mm , Pressure relief valve 2 , Mono Block
Submersible Pump 10 HP Lubi Kirloskar Duke CRI , Electrical
Cable 4Sqmm 3 Core Copper Multi stranded , PVC pipe
110mm class 2 4kg cm2 , PVC pipe 90mm class 2 4kg cm2 ,
PVC pipe 63mm class 2 4kg cm2 , Ventury and Manifold 3 ,
PVC control valve 63mm , PVC Flush Valve 63mm , Emitting
pipe 16mm 2 to 2 4 lph 30Cm CL II , Lateral 16mm Class II 2
5Kg cm2 , Micro-Sprinkler 16LPH BLK , Mini Valve 16 16mm
, Hydrant Assembly 3inch Size Complete , Isolation Valve
3inch Complete , Main line flush valve 3inch complete ,
Butterfly valve 4inch complete , Butterfly valve 3inch
complete , Irrigation Controller with RS 485 Communication
Adaptor and compatible software , Automatic Injection type
fertigation machine with 3 1 Channel and EC and PH , Air
Blower 3 Phase , Disc Filter 7m3 hr 32mm , Solenoid
operated Hydraulic Valve 63mm 2 Plastic , 24VAC Solenoid
coil , Pulse type Water meter with reed switch 3 , 1 point
5mm Single core multistranded copper wire , 2 point 5mm
Single core multistranded copper wire , Conduit pipe 32mm
, Conduit pipe 40mm , Servo Voltage stabilizer 1KVA , Auto-
Manual Electrical control panel for 10HP 3HP , PVC Tank for
Fertilizer 500 Ltr , Laptop compatible to Irrigation Controller
, PVC Pipe 32mm , PVC control Valve 32mm plain ,
Sediment sampler , water meter for pipe flow , Infiltrometer
, water flow meter base for open channels
Closing Date15 Apr 2025
Tender AmountRefer Documents
Airports Authority Of India - AAI Tender
Goods
Electronics Equipment...+2Electrical Goods and Equipments, Electrical and Electronics
GEM
Corrigendum : Corrigendum Added
Cachar, Assam
Details: CATEGORY: Fixing, Installation and Configuration of 55 Inches LED
Monitor with Inbuilt SOC on suitable ceiling mount brackets
or frames etc , Installation and Configuration of Desktop PC
with softwares at site , Installation and Configuration of
Server for Primary PC with softwares at site , Installation and
Configuration of Server Fail Over for Backup PC with
softwares at site , Installation of Antivirus for Server and
Desktop , Mounting, Fixing, Installation and Configuration of
24 Ports L2 Network Switches , Mounting, Fixing, Installation
and Configuration of 24 Ports L3 Network Switches ,
Mounting, Fixing, Installation and Configuration of 8 Ports L2
Network Switches , Installation and Fixing of SFP , Mounting,
Fixing and Dressing of 42U Floor Stand Rack , Mounting,
Fixing and Dressing of 6U Wall Mount Rack , Digging,
Consuling etc. of 6 Core Outdoor Armoured Single Mode OFC
Cable , Mounting, Fixing and Dressing of Fibre Optic LIU 12
Port loaded with LC Adapter , Mounting, Fixing and Dressing
of Fibre Optic LIU 24 Port loaded with LC Adapter ,
Mounting, Fixing and Dressing of Fibre Optic LIU 6 Port
loaded with LC Adapter , Termination and Fixing of LC LC ,
Laying of Cat6 UTP Through PVC pipe , Mounting, Fixing and
Installation of 24 Port Patch Panel , Termination and Fixing
of 1 Mtr. Cat 6 UTP Information Outlet , Termination and
Fixing of 2 Mtr. Cat 6 UTP Information Outlet , Termination
and Fixing of 5 Mtr. Cat 6 UTP Information Outlet ,
Installation of Information Outlet as per Technical
Specification , Mounting and Installation of KVM and Console
, Laying of 3 Core 2.5 mm Electrical Cable Through PVC Pipe
, Installation of 16 Amp Three pin Shuttered switch socket
Combined 3 in 1 with Cover Plate and back box , Laying or
fixing of 25 MM and 32 MM PVC pipes and flexible pipes on
or above of false ceing or fixing on wall including fixing of
suitable saddle or screws etc , Installation of 25Amp MCB
with DB Box , Testing, commissioning and integration of
FIDS Software , Installation, Testing and Commissioning of
01 No. 15 KVA UPS for Primary , Installation, Testing and
Commissioning of 01 No. 15 KVA UPS for Backup , Testing,
commissioning, certification, providing 3 sets of completion
diagram and Documentation of Entire Project
Closing DateCancelled
Tender Amount₹ 2.1 Cr
North Central Railway - NCR Tender
Works
Civil And Construction...+2Consultancy Services, Civil And Architectural Services
Ireps
Kasganj, Uttar Pradesh
Details: Description:- Conducting Final Location Survey (fls) For Broad Gauge Railway Line Along The Existing
line With Consultant's Own Labour, Tools, Plants & Equipment, Materials, Transportation With All Lead
and Lifts, Duly Taking All Safety Precautions To Ensure Safety, Using Survey Instruments Like Total
stations, Dgps, Auto Levels Etc And Using Mx Rail Software As Per The Scope, Terms Of Reference,
relevant Provisions Of Indian Railways Code For Engineering Department (1999, Third Reprint) With Up
to Date Correction Slips, Special Conditions Of Tender And As Directed By The Engineer-in-charge,
including Topographical Survey For 25metre Corridor On Proposed Alignment Side Of Center Line Of
existing Track Or On Both Sides Of Proposed Alignment At Diverted Alignment Or Adequate Width In
station Yards As The Case May Be, Taking The Longitudinal Levels At Intervals Of 20 M. & At Obligatory
points And Cross Sectional Levels At An Interval Of 5m ( Or Less As Decided By Engineer In Charge As
per The Terrain) ( Extra Width To Be Covered At Some Locations As Directed By Engineer -in- Charge),
including Staking Of Approved Alignment With Cc Pillars (150x150x900mm Size With 300mm Projected
above Ground Level) At An Interval Of 100m And With Wooden Pags ( 50x50x450mrn Size) At Every
20m Where Track Is Not Parallel Or Is Away From The Existing Track By More Than 15 M (cost Of Wooden
pags In Inclusive).the Rcc Pillars Shall Also Be Fixed On Curves Indicating Transition Portion, Apex
point, Crown Of Curve, Beginning And End Point Of Circular Curves, (5 Locations For Each Curve), At
major Bridges Two Posts One On Either Side (payment For Cc Pillars Will Be Made Separately As Per
item 2 Of Schedule), Including Submitting List Of Distance And Coordinates Of Centre Line Of Proposed
bg Line From Centre Line Of Existing Bg Line At Every 20m Interval. The Rate Also Includes Preparation
and Submission Of Report Of Final Location Survey (fls) Printed & Duly Bound (2 Sets) And With Two
soft Copy In Cd. Note : Detailed Project Report (dpr) Should Be Prepared As Per Railway Board Letter
no. 2022/w-1/gen/dpr Proforma (e-off : 3404238) Dt. 13.12.2023
Closing Date15 Jan 2025
Tender Amount₹ 18 Lac
Quality Council Of India - QCI Tender
Goods
Electronics Equipment...+1Electrical and Electronics
GEM
Corrigendum : Closing Date Modified
New Delhi, Delhi
Details: CATEGORY: LED Video Wall Screen , Professional Ultra HD Display Panel
, Ultra HD Display Panel , Professional Ultra HD Display
Panel 75 , Professional Ultra HD Display Panel 65 ,
Professional Ultra HD Display Panel 55 , Professional Ultra
HD Display Panel 43 , Multi touch Interactive 65 , Multi
touch Interactive 75 , Wall Mount 75kg , Wall Mount 110kg ,
Universal Flat Screen Ceiling Mount , Mount Trolley , Cable
Cubby type 1 , Cable Cubby type 2 , Wooden lectern , Room
Scheduler Display , Wireless presentation module , PTZ
Conference camera , PTZ Conference camera with minimum
20 X , HD Visual Communications System , Mini PC ,
Switcher with HDMI type one , Switcher with HDMI type two
, HDMI , AV X , Communication Bar type1 , Communication
Bar type2 , Round Ceiling Mounted Beamforming
Microphone Array , Ceiling microphone with automatic
dynamic Beamforming technology , Digital Wireless UHF
handheld microphone set , Digital Wireless UHF lapel
microphone , Digital Wireless UHF Headset microphone ,
Active Antenna Splitter , Antenna booster , Passive
directional antenna , 2 way antenna splitter , Charging set
with USB charge , 40 CM Gooseneck Shotgun Microphone ,
Wireless Access Point , Tabletop wireless conference unit ,
Short Stem Removable 98MM , Audio License , Charging
station , Open Architecture Digital Signal Processor type 1 ,
Open Architecture Digital Signal Processor type 2 , Open
Architecture fle Xible chassis , Software based control
system , Network I by O E Xpander , Multi touch Touch
Screen Controller , Multi touch Touch Screen Controller with
24 bit , Managed Switch , Managed Switch 24 , Mount
Loudspeaker , Two Way Pendant Mount Loudspeaker ,
Ceiling mount loudspeaker with back can , 8 Channel Class
D Amplifier , Quad Channel Class D amplifier , 1 Meter
Premium High Speed HDMI , 2 Meter Premium High Speed
HDMI , 3 Meter Premium High Speed HDMI , 5 Meter
Premium High Speed HDMI , 10 Meter Premium High Speed
HDM , 15 Meter Premium High Speed HDMI , Two Meter Full
featured Type C ProAV cable , 10 Meter HUSB 3 1 Gen1
SuperSpeed Active E Xtension Cable , Industrial Hub Switch
, 14 AWG Speaker Cable , 6 STP Cable , Connector and
Accessories , Rack Structure 24 U Air Cooled AV Equipment
Rack , Content Management System , Professional HD
Display
Closing Date27 Mar 2025
Tender Amount₹ 5.9 Cr
This is an estimated amount, exact amount may vary.
Defence Research And Development Organisation - DRDO Tender
Goods
Electrical Goods and Equipments
GEM
Hyderabad, Telangana
Details: Lan Programmable Power Supplies 360watts , Lan Programmable Power Supplies 1600watts , Lan Programmable Power Supplies 5000watts , Lan Programmable Power Supplies 3000watts , Programmable Electronic Load 600w , Ups 6kva , Digital Earthing Instrument , Rugged 3kva Ups , 32 Channel Recorder , Multi Meter , Safety Igniter Tester , Digital Clamp Meter Ac Slash Dc , Insulation Tester , Lcr Meter Smart Tweezers , Handheld Lcr Meter With Accessories , Boroscope , Mixed Signal Oscilloscope , 30 Mhz Waveform Generator , Bonding Resistance Tester , Megger Insulation Testers , 4 Channel Recorder With Accessories , Computer Based Usb Oscilloscope , Hot Air Gun , Soldering Station With Tips , De Soldering Pump , Electrical Tool Kit , Thermal Wire Stripper , Wire Stripper , Wire Cutter , Cable Cutter , Lockable Knife , Monkey Plier , Lug Crimping Tool , Splice Crimping Tool , Crimping Tool M22520 Slash 2-01 , Positioner M22520 Slash 2-07 , Positioner M22520 Slash 2-09 , Positioner M22520 Slash 2-06 , Positioner M22520 Slash 2-08 , Positioner M22520 Slash 2-04 , Positioner M22520 Slash 2-34 , Positioner M22520 Slash 2-37 , Crimping Tool M22520 Slash 1-01 , Turret Head M22520 Slash 1-02 , Turret Head M22520 Slash 1-04 , Turret Head M22520 Slash 1-18 , Open Frame Crimp Tool M22520 Slash 5-01 , Die Set M22520 Slash 5-03 , Die Set M22520 Slash 5-105 , Die Set - Functionally Equivalent To Trompeter 155 Twinax Cd5-8 , Single Position Head , Positioner For Glenair Contacts , Fine Tipped Indenter Crimp Tool , Positioner , Calibration Tool M22520 Slash 3-15 , Calibration Tool M22520 Slash 3-01 , Calibration Tool Mh992 , Circular Indent Crimp Tool For Outer Contact Size 12 Gs200-1 , Single Position Head For M225220 Slash 31-02 , Rj45 Crimping Tool Modular Crimp In Tool , Resistance Forming Pliers , Allen Key Kit , Retention Tester Kit , Screw Driver Set , Precision Electronic Screw Driver Set , 3m Hot Melt Applicator Tc With Palm Trigger And Quad Rack Converter , 1 Applicator Case , Insulated Pliers And Cutters Set , Mil-std-1760 Maintenance Kit , Torque Wrench , Spanner Set , Gps Re-radiation Kit , Power Extension Boards 50 Meters , Power Extension Boards 5 Meters , 27u Rugged Rack , 15u Rugged Rack , Shelving System With Doors 1875mrn X 900mm X 450mm , Esd Tables , Esd Chair , Duratool Compartment Storage Box , Duratool Assortment Cases Set Of 4 , Duratool Tool Box , Fire Proof Almirah , Public Addressing System , Interactive Display , Semi Rugged Checkout Computer , Computer Hardware Simulator Systems , Report Generation System In Color With Ethernet Interface , Mil-std-1553 Dual Node Pci Card , Mil Std 1553 Usb Multi-i Slash O Test And Simulation Hardware , Mil-std-1553b Four Stub Data Bus Coupler , Bus Tracer , 1553 Data Decoding Software , Programmable Electronic Load 1200w
Closing Date3 May 2025
Tender AmountRefer Documents
Airports Authority Of India - AAI Tender
Goods
Telecommunication Services
GEM
Corrigendum : Closing Date Modified
Mysuru, Karnataka
Details: CATEGORY: Supply of Main and standby set of EPABX system it should
be of IP EPABX with Media Gateway category based on
Server media gateway Architecture and it can be integrated
with existing BSNL setup , Supply of Desktop latest
technology with relevant software for Monitoring and
controlling of EPABX , Supply of EPABX operator console ,
Supply of 24-port layer-2 POE switch with 1G 4 No. SFP port.
, Supply of 16-port layer-2 POE switch with 1G 2 No. SFP
port , Supply of fully loaded 42U rack 800x1000x2013
WxDxH with both side Earthing strips , Supply of 12U wall
mount rack. , Supply of Executive IP Phone POE based sets
with 4.3 inches display. , Supply of IP Phone POE based sets
with 2.4 inches display. , Supply of Analog telephone sets
with CLI and speaker. , Supply of SFP-1G-LR. , Supply of
materials for conventional earthing system, with length of
copper strip is 50 meters. , Supply and laying of 6 core SMF
9 125 micron 1000Mbps Fiber Optic Network cable including
clamps connectors terminations splicing and all accesories
etc , Supply of fully loaded LIU with 12 port rack mountable ,
Supply and laying UTP CAT 6 data cable with connectors
termination etc , Supply and laying telephone cable with
connectors termination etc , Supply of 2.5 Sqmm 3 core
multi strand coppe wire power cable , Supply of 24 PORT
Cat 6 IO patch panel with shutter , Supply of RJ45 CAT6E
Lan IO Network Keystone Jack Gang Box Single Port Face
Plate 1 set , Supply of Cat3 Rj11 6p4c Phone Telephone
Keystone Jack IO box , Supply of Gang Box With Input
Output ROSETTE BOX , Supply of RJ11 Telephone Line Cabl
3 Meter. , Supply of CAT6 LAN cables 3 meters. , Supply and
laying casing capping for LAN cable wiring with all fittings L
and T 100x40 mm size , Supply and laying casing capping
for LAN cable wiring with all fittings L and T 30x10 mm size ,
Supply of MDF Main distribution frame with cover with 10
Krone connectores 100 pairs , Supply of IDF Intermediate
distribution frame with cover 02 Krone connectores 20 pairs
, Supply of 0.5mm Armoured 20 Pair JFC Cable , Supply of
0.5mm Armoured 10 Pair JFC Cable , Supply of telephone
line spd , Supply and laying of 50 mm dia HDPE pipe PN-6 ,
Excavation in soft Soil with the required depth up to 75cm
Backfilling with marking flag , Excavation in Hard Soil with
the required depth up to 75cm Backfilling , Training and
Documentation Charges , Installation testing and
commissioning charges. , 4th year CAMC after completing 3
year warranty - Only for SL No 1 and 02 , 5th year CAMC -
Only for SL No 1 and 02 , 6th year CAMC - Only for SL No 1
and 02 , 7th year CAMC - Only for SL No 1 and 02 , 8th year
CAMC - Only for SL No 1 and 02 , 9th year CAMC - Only for
SL No 1 and 02 , 10th year CAMC - Only for SL No 1 and 02
Closing Date16 Jun 2025
Tender Amount₹ 1.1 Cr
IREL India Limited Tender
Goods
Electronics Equipment...+1Electrical and Electronics
GEM
Corrigendum : Closing Date Modified
Ernakulam, Kerala
Details: BOQ ITEMS: Supply of PAC 9074CRIO9067 Details as per Sl No 1 in BOQ, Supply of DI 329425 with accessories Details as per Sl No 2 in BOQ, Supply of DO 329476 with accessories Details as per Sl No 3 in BOQ, Supply of AI 169208 with accessories Details as per Sl No 4 in BOQ, Supply of AO 49265 with accessories Details as per Sl No 5 in BOQ, Supply of Magnetic Flow meter Details as per Sl No 6 in BOQ, Supply of Digital Rotameter Details as per Sl No 7 in BOQ, Supply of Radar Level Transmitter Details as per Sl No 8 in BOQ, Supply of 3KVA online UPS with battery Details as per Sl No 9 in BOQ, Supply of FRP cable Tray Details as per Sl No 10 in BOQ, Supply of High End computer Details as per Sl No 11 in BOQ, Supply of Control Cable 24 C x 1Sq mm Details as per Sl No 12 in BOQ, Supply of Control 12pair x 1Sq mm Details as per Sl No 13 in BOQ, Supply of Control Cable 12 C x 1Sq mm Details as per Sl No 14 in BOQ, Supply of Control 1pair x 1Sq mm Details as per Sl No 15 in BOQ, Supply of Thermoplastic Junction box Details as per Sl No 16 in BOQ, Supply of Thermoplastic Junction box Details as per Sl No 17 in BOQ, Supply of control relays with base 24V DC Coil Details as per Sl No 18 in BOQ, Supply of control relays with base 230V AC Coil Details as per Sl No 19 in BOQ, Supply of Miscellaneous items Details as per Sl No 20 in BOQ, Supply of PLC cum computer console Details as per Sl No 21 in BOQ, Supply of Computer chair Details as per Sl No 22 in BOQ, Supply of structural material Details as per Sl No 23 in BOQ, Supply and Installation of HDPE pipe Details as per Sl No 24 in BOQ, Labour charge for Erection and commissioning of
PAC 9074CRIO9067 Details as per Sl No 25 in BOQ, Labour charge for Erection and commissioning of DI 329425 with accessories Details as per Sl No 26 in BOQ, Labour charge for Erection and commissioning of DO 329476 with accessories Details as per Sl No 27 in BOQ, Labour charge for Erection and commissioning of AI 169208 with accessories Details as per Sl No 28 in BOQ, Labour charge for Erection and commissioning of AO 49265 with accessories Details as per Sl No 29 in BOQ, Labour charge for Erection and commissioning of Magnetic Flow meter Details as per Sl No 30 in BOQ, Labour charge for Erection and commissioning of Digital Rotameter Details as per Sl No 31 in BOQ, Labour charge for Erection and commissioning of Radar Level Transmitter Details as per Sl No 32 in BOQ, Labour charge for Erection and commissioning of 3KVA online UPS Details as per Sl No 33 in BOQ, Labour charge for Laying fixing Erection of FRP cable Tray Details as per Sl No 34 in BOQ, Labour charge for Laying glanding Details as per Sl No 35 in BOQ, Labour charge for Laying glanding Details as per Sl No 36 in BOQ, Labour charge for Laying glanding Details as per Sl No 37 in BOQ, Labour charge for Laying glanding Details as per Sl No 38 in BOQ, Labour charge for Erection and commissioning of Thermoplastic Junction box Details as per Sl No 39 in BOQ, Labour charge for Erection and commissioning of Thermoplastic Junction box Details as per Sl No 40 in BOQ, Labour charge for Erection and commissioning of control relays with base Details as per Sl No 41 in BOQ, Labour charge for Erection and commissioning of control relays with base Details as per Sl No 42 in BOQ, Labour charge for Erection and commissioning of PLC Panel with computer console Details as per Sl No 43 in BOQ, Labour charge for Erection and commissioning of High End computer Details as per Sl No 44 in BOQ, Labour charge for Structure works Details as per Sl No 45 in BOQ , Labour charge for Installation of HDPE pipe Details as per Sl No 46 in BOQ , Labour charge for Software programming Details as per Sl No 47 in BOQ
Closing Date17 Apr 2025
Tender Amount₹ 1 Cr
6501-6510 of 6510 archived Tenders