Tenders of Border Roads Organisation in Sikkim

Supply And Stacking Of Crushed Stone Aggregates Of Various Sizes And Stone Dust At Km 24.75 Hmp Loc On L-k Road For Bc 40 Mm For Resurfacing Works 2024-25 On Lachen-kalep Road Under 86 Rcc 758 Brtf Project Swastik In The State Of Sikkim

Supply And Stacking Of Crushed Stone Aggregates Of Various Sizes And Stone Dust Dry At Km 9.00 (hmp Site) On Lachung-

Ssi, Design Including Proof Check Of Design And Drawings And Construction Of 40 Mtr Span Irc 70r Psc Box Girder Superstructure Pmt Bridge On Open Foundation Over Lingtham Khola At Km 30.00 On Rishi-rongli-kupup Road Under 130 Rcc/764tf (p) Swastik In

BOQ ITEMS: Shovel Round Nose with handle 2.3 Kgs excluding handle weight, Shovel Square Nose with handle 2.5 Kgs excluding handle weight, Pick Axes chisel wide end pint and weight 3 KG, Spade with handle 1.8 Kgs excluding handle weight, Crowbar Tempered 1650mm Long with Across Flat Weight 5.1Kg, Wheel Barrow Steel Double Wheel, Tape steel 5 Mtr long, Tape metalic 15 Mtr long, Tape steel 30 Mtr long , Tape metalic 30 Mtr long, Axes Felling 2Kg with Handle, Hack Saw Frame fixed with blade Thickness 1/4 inch Size 12 inch, Duoble faced sledge Hammer fully hardened and tampered 2 Kg ISI mark, Duoble faced sledge Hammer fully hardened and tampered 6.5 Kg ISI mark, Dah Iron size 17 inch with handle, Bitumen heating Thermometer (Digital Type), Rain Gauge, Spirit level 12 inch Steel Body , Cutting plier 6 inch, Electric line tester, Screw Driver set of 5 Pcs, Insulated Combination plier 165 mm , Hand Gloves Rubber Red , Screw driver 4 inch flat/star, Screw driver 8 inch flat/star, Light duty drill Machine, Chisel Carpenter 1/2 inch, Chisel Carpenter 3/4 inch, Chisel Carpenter 1 inch, Chisel Carpenter 1 1/2 inch, Chisel Carpenter 2 inch, Pincer Carpenter 8 inch, Pincer Carpenter 6 inch, Braces Carpenter, Fine iron with hardened cutting blace Jack plain 14 inch Steel body, Carpentry Try Square 12 inch 90 Degree Angle, Handsaw 20 inch ISI Mark, Carpenter vice 8 inch SG Iron body unbreakable , Basula with handle 1 Kgs excluding handle weight, M S Sheet Cutter drop forged (Snip) 12 inch, Nose Plier 6 inch 165 mm length , Mason Thread, File Triangular 6 inch, Concrete beat 6mm, Concrete beat 8mm, Mason Trowel 8 inch Steel with Handle, Mason Trowel 9 inch Steel with Handle, Plum Bob 8 OZS, Gurmala Steel 9 inch with plastic handle, Mason Trowel 4 inch Steel with Handle, Mason Trowel 5 inch Steel with Handle, Mason Trowel 6 inch Steel with Handle, Glass Cutter Diamond suitable for cutting glass panes, Pan Mortar 18 inch Dia 16 Guage and top pointing edge moulded outside by insisting 3mm GI wire, Hack saw blade 12 inch x 1/2 inch with one side cutter, Hack saw blade 12 inch x 1 inch with both side cutter, Hammer Stone Dressing fully hardened and tampered 1 Kg ISI mark, Hammer Stone Dressing fully hardened and tampered 2 Kg ISI mark, Hammer stone dressing fully hardened and tampered 1/2 KG ISI Mark, Multimeter Digital 8 Digits standard, Water Tulu Pump with Motor 1 HP, Edge Carpenter, Chisel mason size 1/2 inch x 6 inch, Racker 12 Prong MS 12 inch long with wooden handle, Racker 8 Prong MS 12 inch long with wooden handle, Wheel for wheel barrow made of Cast Iron with solid rubber tyre size 10 inch, File Triangular 8 inch, Hack saw blade 12 inch x 1/2 inch with both side cutter, Hammer for Electrician , Electric Plainer for carpenter, Helmet Demolition with chin strip, Soldering Iron 60w, Earth Rammer 14 LBS with handle of seasoned hardwood , Chisel firmer size 1 inch, TCT Drilling Rods 108 MM Shank x 22 MM Hex of length 300 MM x 32 MM Bit Diameter, TCT Drilling Rods 108 MM Shank x 22 MM Hex of length 400 MM x 32 MM Bit Diameter, TCT Drilling Rods 108 MM Shank x 22 MM Hex of length 600 MM x 32 MM Bit Diameter, TCT Drilling Rods 108 MM Shank x 22 MM Hex of length 800 MM x 32 MM Bit Diameter, TCT Drilling Rods 108 MM Shank x 22 MM Hex of length 900 MM x 32 MM Bit Diameter, TCT Drilling Rods 108 MM Shank x 22 MM Hex of length 1000 MM x 32 MM Bit Diameter, TCT Drilling Rods 108 MM Shank x 22 MM Hex of length 1200 MM x 32 MM Bit Diameter, TCT Drilling Rods 108 MM Shank x 22 MM Hex of length 1500 MM x 32 MM Bit Diameter, TCT Drilling Rods 108 MM Shank x 22 MM Hex of length 1600 MM x 32 MM Bit Diameter, TCT Drilling Rods 108 MM Shank x 22 MM Hex of length 1800 MM x 32 MM Bit Diameter, TCT Drilling Rods 108 MM Shank x 22 MM Hex of length 2400 MM x 32 MM Bit Diameter, TCT Drilling Rods 108 MM Shank x 22 MM Hex of length 2800 MM x 32 MM Bit Diameter, TCT Drilling Rods 108 MM Shank x 22 MM Hex of length 3000 MM x 32 MM Bit Diameter, TCT Drilling Rods 108 MM Shank x 22 MM Hex of length 3200 MM x 32 MM Bit Diameter, TCT Drilling Rods 108 MM Shank x 22 MM Hex of length 3600 MM x 32 MM Bit Diameter, TCT Drilling Rods 108 MM Shank x 22 MM Hex of length 4000 MM x 32 MM Bit Diameter, TCT Drilling Rods 108 MM Shank x 22 MM Hex of length 4500 MM x 32 MM Bit Diameter, Air Line lubricated 1.3 ltr cap, Coupling female suitable for 20mm dia hose pipe, Coupling male suitable for 20mm dia hose pipe, Coupling rubber washer, Hose clamp 20mm dia, Hose nipple 20mm dia, Jack hammer for atlas copco, Hose pipe rubber for 20mm dia for suction/ delivery superior quality., Pusher leg for atlas copco jack hammer, Y junction/connector for pusher leg 20mm dia, Hose pipe clamps with nut and bolt suitable for 20 mm dia hose pipe, Connector suitable for 20mm hose pipe, Repair kit for jack hammer Atlas Copco, Lubricator for Jack hammer, Ring spanner set, Rubber O ring suitable for male/ female coupling, Concrete Mixer 0.5 CUM 10/7 400 Ltr cap with 6 HP diesel engine, Concrete Needle coupling type 20 MM dia for Vibrator, Conc Needle Vibrator machine , Welding Rod D/size dia, Welding Goggles, Welding Holder, Hand Grinder, Hand Grinder blade/ or Stone, Rotary Pump for Lubricants, Pusher leg clamp, Battery crocodile clips, Battery lead heavy duty positive , Battery lead heavy duty negative, Blow lamp for heating eqpt, Claw hammer with handle 450gm, Cotton waste, Baygon concentrate, Baytex concentrate, BHC Powder, Bleaching Powder, Collin for cleaning (500ml), Dettol (Liquid) for hand wash (250ml), Lip Salve, Harpic 700 Ml, Malathine, Napthalene balls, Air Freshner for Bathroom 100Gm, Phenol 1Ltr pack, Room Freshener standard, Soap Yellow, Foot Powder, Rat Poision (Mortine) (100Gm), Araldite 1 Kgs pack, Dendrite 1 Kgs pack , Fevicol SR 1 Kgs, Fevicol (wood work) SH, Fevicol tube 30gm, Feviquick 5gm , M seal

CATEGORY: Automotive Vehicles - Pneumatic Tyres for Passenger Car Vehicles - Diagonal and Radial Ply as per IS 15633 (Q2) , Automotive Vehicles - Pneumatic Tyres for 2 and 3 Wheeled Motor Vehicles, Quadricycles and E-Rickshaw / E-Carts as per IS 15627 (Q2) , Automotive Vehicles - Pneumatic Tyres for Commercial Vehicles - Diagonal and Radial Ply as per IS 15636 (Q2) , OTR Tyres for HEMMs (Q3) , Automotive Vehicles Pneumatic Tyres for Defence (Q2) , Flaps for Automotive Vehicles Pneumatic Tyres and Tubes as per IS 9168 (Latest) (Q3) , TTF1 , TTF2 , TTF3 , TTF4 , TTF5 , TTF6 , TTF7 , TTF8 , TTF9 , TTF10 , TTF11 , TTF12 , TTF13 , TTF14 , TTF15 , TTF16 , TTF17 , TTF18

CATEGORY: 26240325 Armature Assy , 26243124 Brush Gear Assy , 26241170 Drive Assy 10 teeth , 26242105 Brush Kit , 26242104 Bush Set Assy , 26242106 Fasteners Assy Kit

CATEGORY: Oil Filter 1479284 , Fork 1471800 , Fork 1471801 , Auger Segment 1471806 , Pedestal Bearing 1476118 , Sealing Plate 1480277 , Sealing Plate 1480276 , Auger Segment 1471804 , Feather Key 1477157 , Auger Segment 1471809 , End Piece Oncover 1480289 , Auger Segment 1471808 , Spacer 76 2x50 8x168 14 AP550 1480258 , Counter sunk Screw 1473763 , Counter sunk Screw 1480851 , Pedestal Bearing 1476039 , Hexagon Nut 1480908 , Washer 1480924 , Set Screw 1480778 , Set Screw 1480780 , Hex Screw 1480709 , Hex Screw 1480708 , Hex Screw 1480693 , Hexagon Nut 1480947 , Engine Stop Cable 1451019 , Accelerator Cable 1475424 , Ignition Switch NO 1477852 , Brake Disk 1478987 , Tapered Roller Bearing 1451634 , Cover 1480281 , Tyre 1475842 , Sleeve 1456040 , Sleeve 1456038 , Sleeve 1478937 , Rod realy and LH 1471512 , Rod realy and RH 1471511 , Rod end bearing 1480232 , Pressure roller 1488641 , Gasket 1476171 , Solenoid valve 1479152 , Solenoid valve 1456212 , Selector actuator 1478079 , Selector actuator 1478078 , Selector actuator 1478080 , Potentiometer 1477805 , Relay 1477603 , Relay 1477607

CATEGORY: NK Display Unit Assy Panel Board Ignition Switch , NK Benjo Bolt , NK Benjo Washer , NK Bolt , NK Nut

Execution Of Surfacing Work For Providing, Laying And Compaction Of Wet Mix Macadam (wmm) 100 Mm Thick (one Layer) And 75 Mm Thick (two Layer) As Per Guidelines Of Morth Specifications For Road And Bridge Works (fifth Revision) Between Km 7.00 To Km

CATEGORY: SD RSN 142M41337 Nozzle , A6DB 46296203 FIP Assy Stanadyne , 50504 04 Benjo Bolt , 39027220 Fuel Pipe , 25040010 Fuel Pipe