Power Cable Tenders

Details: Description :train Set Complete Prefabricated Jumper Power Ivc Cable With Cleat Assembly As Per Cla use 4.41 Of Rdso Specification No. Rdso/pe/spec/emu/0196-2019(latest) Along With Latest Annexure A nd Addendum/corrigendum To M/s Harting Part No.84200000021391 Suitable To Vb Rakes. [ Warranty period: 30 Months After The Date Of Delivery ] ]

Details: Description :train Set Complete Prefabricated Jumper Power Ivc Cable With Cleat Assembly As Per Cla use 4.41 Of Rdso Specification No. Rdso/pe/spec/emu/0196-2019(latest) Along With Latest Annexure A nd Addendum/corrigendum To M/s Harting Part No.84200000021391 Suitable To Vb Rakes. [ Warranty period: 30 Months After The Date Of Delivery ] ]

Description: CATEGORY: USB_hub_4_port_DIN_bracket_mount , Optocoupler_in_5VDC_out_4-48VDC , 3,3_VDC_Input_to_Exi_Output_IEC , Board,_pITX- E38_QC_1,91GHz_E3845 , MikroTik_hAP_5_port_router_Wireless_fiber , Chameleon_USB2_cam,_CMLN-13S2C-CS , Cable_SBC_to_USB-B_male , USB_triggercable,_2,8m , Mark_II_Keyboard , Mark_III_Keyboard , Screw_M4x8_ISO_7380_elz , Terminal_box , V-buffer , Plate , Console , Fixation_bracket_for_ball_guide , Console_for_ball_guide , Buffer_M16x1,5 , Adjustable_bracket_for_foot_piece , Rubber_suspension_w,_shaft , Shaft , Turning_joint , Lifting_rail , Lifting_rail_type_2 , Service_Kit_for_Central_Column , Coal_12,5x25x25Carbon_Bush , Threaded_Flange , Central_pipe_339B784 , Driving_wheel , Locking_ring , Distance_ring , Hydraulic_motor_FHGS , Coubling_pumppart_A19,A_Alu , Coubling_motorpart_A19_24,24H7_Alu , Coupling_element_ZK19_92shA_rubber_spider , V- belt_C_22_Antistatic , Chain_wheel_76_tds , Chain_wheel_duplex , Roller_chain_duplex , Adjusting_screw_M10x40 , Reflector_round_83 , Centering_arm_for_UFM_ATEX_V2 , Pipe_for_filling_head_15mm_elbow , Pipe_Ermeto_1300_tower , Pressure_switches_1-5_bar , Wear_plate1 , GSV_Seal_Kit , Gas_stop_valve , Valve_spindle_shaft_for_gas_stop_valve_M8 , Circlip_J_42_DIN_472-css , O-ring_PUR90 , Gasket_PUR70 , Spring_comp_Lo42_dt1,7_Du15 , Straight_coupl_Connector , Valve_spindle , DP_Valve_Service_Kit , Plate_spring , O- ring_NBR70 , Vibration_absorber_AD-3025_black , Diffuser_plate , Air_distributor_mat , Screw_DIN84A_M2x5 , Sealing_ring , Straight_female_plug_Strait_male_plug_4_contacts_0,8_m , M12_female_to_double_M12_male , Seal_housing_compact , Top_housing_Compact_India , Arm_complete,_centring_unit,_Right , Arm_complete,_centring_unit,_Left , Toggle_joint , Shaft_for_guide_rotary_centering_RF , Threaded_rod_DIN975_M10x195_4,6elz , Cylinder_lifting_complete , POWER_CABLE_FM,_CS,_VLD,_OLD , LOAD_CELL_CABLE_CAR_1_FM , INPUT_OUTPUT_CABLE_CAR_1 , LOAD_CELL_CABLE_CAR_2_FM , INPUT_OUTPUT_CABLE_CAR_2 , Cable_for_16_input_CUC , Cable_for_16_output_CUC , Check_Scale_LOAD_CELL_Cable_and_GD_CIR_cable , Sensor_Cable_4-pole,_M12-plug,_blue_5,0m , Cable_between_two_T-connector , T_Connection_Box , Diffuse_Sensor , Magnetic_inductive_sensor_Namur , Inductive_sensor_Namur_2mm_M12 , Inductive_sensor_Namur_5mm_M12 , Lens_for_fiber_optic_Z017400 , Fork , CPV-Ex_Pilot_valve- Ex_ia_IIB_T6

Description: CATEGORY: Gear shifting lever , Self starter assy , Dual brake valve assy , Feed pump assy , Wiper blade , Fuel pipe , Filter element oil , Hose assy , Coupling rubber , Pipe flexible 6 mtr , AVR , Diode , Cable assy power elect cw flexible , Fuel pipe file to fuel pump big , Rubber bush lower , Rubber bush top , Plywood gen purpose 7 ply , Plywood gen purpose 9 ply , Nails steel wire round 20 mm x 1 6 , Nails steel wire orund 25mm x 2 , Steel angle iron , Elect welding rod

Description: CATEGORY: FM Tx 50W , Audio Processor , Light Weight Corrosion resistant FM Antenna with Power Splitter , Antenna connector cable , 9 RU Rack , Dummy load 100 W , 12 Channel On-Air Broadband Console , Monitor 50 W , Dynamic Cardiod Microphone -Vocal , RJ Mic Condenser , Computer i5 , Studio Headphone , On Air Monitoring setup- Logger Software , RJ Mic Stand , Table Top Mic Stand , Portable Solid State Field Recorder , Installation Material , Audio Distribution Amplifier , Headphone Distribution Amplifier , Hybrid Telephone , Self-Supported tower 30m , Installation and Commission Ch

Description: Scrap Condemned Diesel Loco No.13195 Wdg3a/udl Diesel Shed [qty. 01 No. 118 Mt Approximately].i.e 1. Chassis With Driver Cab Long Hood And Radiator Room With All Accessories, -01 Nos;2. Ht Cbc Coupler - 02 Nos;3. Air Brake Pipe- 01 Loco Set;4. Truck Frame Finished Casting With All Fitting - 01 Loco Set 5. Main Reservoir - 02 Nos 6. Power Pack Complete With Tg Assembly - 01 Loco Set;7. Radiator Cores - 01 Loco Sets 8. Radiator Fan Assembly And Complete Drive Units- 01 Loco Sets 9. Traction Motors- 06 Nos (01 Loco Set),10. Rectifier Units Complete - 01 Loco Set ,11. All Small Rotating Equipment Intact - 01 Loco Set, 12. Power Cable & Control Cable- 01 Loco Set,13. E. Power Contactor -01 Loco Set, 14. Battery- 08 Nos (01 Loco Set ) Condition - [1]as Is Where Is Basis[2]cutting Allowed. [3] Wheel Sets 06 Sets, Axle Box 06 Pair & Bull Gear 06 Nos. Are Excluded From Sale. Excluded Item To Be Returned To The Custodian In Good Condition By The Purchaser At The Time Of Delivery. 4.the Purchaser Should Visit The Condemned Loco As Well As Its Actual Location Before Bidding, 5. The Scrap Loco Is Sold On As Is Where Is Basis Therefore Railways Does Not Guarantee For Quality Or Quantity As Per Description Etc. And Railways Is Not Responsible For Any Type Of Shortage During Delivery, 6.dismantling And Cutting Is Permitted For Loading And Delivery Purpose, 7. The Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles/vehicle And Necessary Trained Men For Cutting And Dismantling The Components Of The Condemned Loco As Per Requirements, 8. The Purchaser Is Required To Stack All The Reclaimable/excluded Items At One Location Well Away From The Cut Up Parts Of The Locos And It Is Required To Be Returned To The Custodian Before Affecting The Delivery. Purchaser Should Take Adequate Precaution During Dismantling Of Excluded Fittings Item So That The Same Can Be Return Over To The Custodian In A Sound, Undamaged And Intact Condition Otherwise Railway Reserve The Right To Recover The Amount Against Damaged Item Prior To The Delivery, 9. The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In The Near Vicinity Of Cutting Spot Are Damaged In Any Way. The Purchaser Will Be Held Responsible For Any Damage/fire Accident To The Railway Property Caused During Cutting Operation Or Delivery, 10. It Is The Responsibility Of The Purchaser To Segregate And Remove The Unwanted And Leftover Scrap Before Completion Of Delivery Of Loco. Purchaser Has Also To Keep The Cutting And Loading Spot Neat And Clean, Otherwise He May Be Penalized By The Railway, 11. The Purchaser Has To Comply All The Rules And Regulation Of Pollution Control Board Prevailing/existing In The Cutting Spot During Cutting And Dismantling Operation Of Condemned Loco, 12. The Purchaser Should Be Aware Of The Fact That Total Wt. Shown Against Heading [lot Wt. In Mt] In Lot Details Page Under Ireps Portal Is Indicative Only Against This Lot And Purchaser Should Note That During Delivery Of The Lot, The Above [lot Wt. In Mt] In Lot Details Page Is Not To Be Taken Into Consideration, 13. Bidders Are Required To Check The Detailed Conditions And Amendments / Modifications If Any, In Special Condition And In Depot Condition Against Each Lot Online For The Lot/catalogue Published For E-auction Purpose Before Bidding. Before Bidding Bidders Are Also Advised To Inspect And Tally Every Details Of The Lot Including Description, Location, Quantity, State, Hsn Code, Gst Percentage Etc With The Actual Material On Ground As Per Offer Kept With The Custodian And If Any Discrepancies Is Found, It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office For Further Action. No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale, 14.gst, Actual Tcs And Other Taxes Will Be Calculated At The Time Of Preparation Of Challan For Final Deposition Of Bsv.

Description: Scrap Condemned Diesel Loco No.13188 Wdg3a/udl Diesel Shed [qty. 01 No. 118 Mt Approximately].i.e 1. Chassis With Driver Cab Long Hood And Radiator Room With All Accessories, -01 Nos;2. Ht Cbc Coupler - 02 Nos;3. Air Brake Pipe- 01 Loco Set;4. Truck Frame Finished Casting With All Fitting - 01 Loco Set 5. Main Reservoir - 02 Nos 6. Power Pack Complete With Tg Assembly - 01 Loco Set;7. Radiator Cores - 01 Loco Sets 8. Radiator Fan Assembly And Complete Drive Units- 01 Loco Sets 9. Traction Motors- 06 Nos (01 Loco Set),10. Rectifier Units Complete - 01 Loco Set ,11. All Small Rotating Equipment Intact - 01 Loco Set, 12. Power Cable & Control Cable- 01 Loco Set,13. E. Power Contactor -01 Loco Set, 14. Battery- 08 Nos (01 Loco Set) Condition - [1]as Is Where Is Basis[2]cutting Allowed. [3] Wheel Sets 06 Sets, Axle Box 06 Pair & Bull Gear 06 Nos. Are Excluded From Sale. Excluded Item To Be Returned To The Custodian In Good Condition By The Purchaser At The Time Of Delivery. 4.the Purchaser Should Visit The Condemned Loco As Well As Its Actual Location Before Bidding, 5. The Scrap Loco Is Sold On As Is Where Is Basis Therefore Railways Does Not Guarantee For Quality Or Quantity As Per Description Etc. And Railways Is Not Responsible For Any Type Of Shortage During Delivery, 6.dismantling And Cutting Is Permitted For Loading And Delivery Purpose, 7. The Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles/vehicle And Necessary Trained Men For Cutting And Dismantling The Components Of The Condemned Loco As Per Requirements, 8. The Purchaser Is Required To Stack All The Reclaimable/excluded Items At One Location Well Away From The Cut Up Parts Of The Locos And It Is Required To Be Returned To The Custodian Before Affecting The Delivery. Purchaser Should Take Adequate Precaution During Dismantling Of Excluded Fittings Item So That The Same Can Be Return Over To The Custodian In A Sound, Undamaged And Intact Condition Otherwise Railway Reserve The Right To Recover The Amount Against Damaged Item Prior To The Delivery, 9. The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In The Near Vicinity Of Cutting Spot Are Damaged In Any Way. The Purchaser Will Be Held Responsible For Any Damage/fire Accident To The Railway Property Caused During Cutting Operation Or Delivery, 10. It Is The Responsibility Of The Purchaser To Segregate And Remove The Unwanted And Leftover Scrap Before Completion Of Delivery Of Loco. Purchaser Has Also To Keep The Cutting And Loading Spot Neat And Clean, Otherwise He May Be Penalized By The Railway, 11. The Purchaser Has To Comply All The Rules And Regulation Of Pollution Control Board Prevailing/existing In The Cutting Spot During Cutting And Dismantling Operation Of Condemned Loco, 12. The Purchaser Should Be Aware Of The Fact That Total Wt. Shown Against Heading [lot Wt. In Mt] In Lot Details Page Under Ireps Portal Is Indicative Only Against This Lot And Purchaser Should Note That During Delivery Of The Lot, The Above [lot Wt. In Mt] In Lot Details Page Is Not To Be Taken Into Consideration, 13. Bidders Are Required To Check The Detailed Conditions And Amendments / Modifications If Any, In Special Condition And In Depot Condition Against Each Lot Online For The Lot/catalogue Published For E-auction Purpose Before Bidding. Before Bidding Bidders Are Also Advised To Inspect And Tally Every Details Of The Lot Including Description, Location, Quantity, State, Hsn Code, Gst Percentage Etc With The Actual Material On Ground As Per Offer Kept With The Custodian And If Any Discrepancies Is Found, It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office For Further Action. No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale, 14.gst, Actual Tcs And Other Taxes Will Be Calculated At The Time Of Preparation Of Challan For Final Deposition Of Bsv.

Description: Scrap Condemned Diesel Loco No.13187 Wdg3a/udl Diesel Shed [qty. 01 No. 118 Mt Approximately].i.e 1. Chassis With Driver Cab Long Hood And Radiator Room With All Accessories, -01 Nos;2. Ht Cbc Coupler - 02 Nos;3. Air Brake Pipe- 01 Loco Set;4. Truck Frame Finished Casting With All Fitting - 01 Loco Set 5. Main Reservoir - 02 Nos 6. Power Pack Complete With Tg Assembly - 01 Loco Set;7. Radiator Cores - 01 Loco Sets 8. Radiator Fan Assembly And Complete Drive Units- 01 Loco Sets 9. Traction Motors- 06 Nos (01 Loco Set) ,10. Rectifier Units Complete - 01 Loco Set ,11. All Small Rotating Equipment Intact - 01 Loco Set, 12. Power Cable & Control Cable- 01 Loco Set,13. E. Power Contactor -01 Loco Set, 14. Battery- 08 Nos (01 Loco Set) Condition - [1]as Is Where Is Basis[2]cutting Allowed. [3] Wheel Sets 06 Sets, Axle Box 06 Pair & Bull Gear 06 Nos. Are Excluded From Sale. Excluded Item To Be Returned To The Custodian In Good Condition By The Purchaser At The Time Of Delivery. 4.the Purchaser Should Visit The Condemned Loco As Well As Its Actual Location Before Bidding, 5. The Scrap Loco Is Sold On As Is Where Is Basis Therefore Railways Does Not Guarantee For Quality Or Quantity As Per Description Etc. And Railways Is Not Responsible For Any Type Of Shortage During Delivery, 6.dismantling And Cutting Is Permitted For Loading And Delivery Purpose, 7. The Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles/vehicle And Necessary Trained Men For Cutting And Dismantling The Components Of The Condemned Loco As Per Requirements, 8. The Purchaser Is Required To Stack All The Reclaimable/excluded Items At One Location Well Away From The Cut Up Parts Of The Locos And It Is Required To Be Returned To The Custodian Before Affecting The Delivery. Purchaser Should Take Adequate Precaution During Dismantling Of Excluded Fittings Item So That The Same Can Be Return Over To The Custodian In A Sound, Undamaged And Intact Condition Otherwise Railway Reserve The Right To Recover The Amount Against Damaged Item Prior To The Delivery, 9. The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In The Near Vicinity Of Cutting Spot Are Damaged In Any Way. The Purchaser Will Be Held Responsible For Any Damage/fire Accident To The Railway Property Caused During Cutting Operation Or Delivery, 10. It Is The Responsibility Of The Purchaser To Segregate And Remove The Unwanted And Leftover Scrap Before Completion Of Delivery Of Loco. Purchaser Has Also To Keep The Cutting And Loading Spot Neat And Clean, Otherwise He May Be Penalized By The Railway, 11. The Purchaser Has To Comply All The Rules And Regulation Of Pollution Control Board Prevailing/existing In The Cutting Spot During Cutting And Dismantling Operation Of Condemned Loco, 12. The Purchaser Should Be Aware Of The Fact That Total Wt. Shown Against Heading [lot Wt. In Mt] In Lot Details Page Under Ireps Portal Is Indicative Only Against This Lot And Purchaser Should Note That During Delivery Of The Lot, The Above [lot Wt. In Mt] In Lot Details Page Is Not To Be Taken Into Consideration, 13. Bidders Are Required To Check The Detailed Conditions And Amendments / Modifications If Any, In Special Condition And In Depot Condition Against Each Lot Online For The Lot/catalogue Published For E-auction Purpose Before Bidding. Before Bidding Bidders Are Also Advised To Inspect And Tally Every Details Of The Lot Including Description, Location, Quantity, State, Hsn Code, Gst Percentage Etc With The Actual Material On Ground As Per Offer Kept With The Custodian And If Any Discrepancies Is Found, It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office For Further Action. No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale, 14.gst, Actual Tcs And Other Taxes Will Be Calculated At The Time Of Preparation Of Challan For Final Deposition Of Bsv.

Description: CATEGORY: Mannequin male_ commercially available , PC with following configuration or higher a Intel core i7 4th Gen 4770 processor or higher , STM 32 Arm 32_bit Cortex _ M3 CPU Core 72 MHz to 1_25 DMIPS by MHz 64 by 128 , Force Sensitive Resistor FSR _402 0_5_D Circular FSR , FSR_407 1_5_x1_5_ square FSR , 3 mm Tactile switch TS_034C 4 Leaded , 5 mm Tactile Switches TS034C _4 Leaded , 3 mm LED LT_0060 , IR Sensor breathing fabricated , Ventilation Sensor ventilation fabricated , LDR GL 55 Series , Saline Sensor fabricated , Injection sensor fabricated , Metal Sheet size 1_5_x1_5_ , Chest iron spring 8__ length_ 1_5 _ width_ 5 mm thickness fabricated , Chest plate mechanical fixature , Reed switches ORD 213 , Push Button NE_ and LE YW4_306 , Peristaltic pump RH_120S or Latest model , Air Pump ACO_003 or Latest model , Air bag , Relay for pulse , Panel mount Connector for AC Mains with ON by OFF switch , Panel mount Connector for Peristaltic pump , Power Cord 15 meter for power supply to mannequin , Ethernet extension cable Cat 6 controller to panel mount 5 meter , Ethernet cable Cat 6 15 meter mannequin to pc , Teflon wire white 1mm 90 meter for internal connectivity , Teflon wire Red 1mm 90 meter for internal connectivity , Teflon wire Black 1mm 90 meter for internal connectivity , Silicone tube 5mm dia 5 meter , 5volt SPDT Relay , Solenoid Valve 12 Volt ADPT , SMPS_230VAC to 12VDC with 3A , 5 mmx2 mm magnets , Oropharyngeal airway , 64 Pin Lower Body Connector , 64 Pin Upper Body Connector , Laryngeal Mask airway LMA , Laryngeal scope , Combitube , Injection 5_10mm , Endo Tracheal Tube ETT , Bag Valve Mask , Sphygmomanometer , ECG probes , Cardio gel for ECG , Wooden splint knots for fracture , Straps _5 meter with wilcrow , Plastic tray , Artificial blood 01 litre , UPS 3 KVA with 30 min power backup , Projector with following specifications a Short Throw WXGA Projector 3500 Ansi Lumens Native resolution 1280 x 800 , Projector screen with stand Matt screen for visual sys with frame size 10_x08_ , Data cable for projector_15 meter from VGA splitter to projector , Power cable for projector_15 meter , Sound system Acoustic system 5_1 channel latest model , Networking components a 01 x VGA splitter with 15 mtr VGA cable b DVI toVGA converter 02 port , Hardware programming module a Data Cable_ Type_ USB to serial , Spike arrestor commercially available , Protection plate for micro_controller board , PVC pipe 1 x meter for airway insertion_ cut into two , a Accessories for male mannequin Bed , b Accessories for male mannequin Bed sheet , c Accessories for male mannequin Mattress , d Accessories for male mannequin Blanket , e Accessories for male mannequin Pillow , e Accessories for male mannequin Combat Uniform set , f Accessories for male mannequinRubber sheet 1mtr x 1mtr , g Accessories for male mannequin Instructor Table , h Accessories for male mannequin Instructorchair , h Accessories for male mannequin Cotton for dressing , j Accessories for male mannequin Band_Aid , Boxes for packing mtrl for male mannequin and associated accessories incl lock , Soft ware CD , Insulation tape , Log book , Marker Pen , Packing tape , Technical manual , User manual , Feviquick , Double side tape

Description: Scrap Condemned Diesel Loco No.13166 Wdg3a/udl Diesel Shed [qty. 01 No. 118 Mt Approximately].i.e 1. Chassis With Driver Cab Long Hood And Radiator Room With All Accessories, -01 Nos;2. Ht Cbc Coupler - 02 Nos;3. Air Brake Pipe- 01 Loco Set;4. Truck Frame Finished Casting With All Fitting - 01 Loco Set 5. Main Reservoir - 02 Nos 6. Power Pack Complete With Tg Assembly - 01 Loco Set;7. Radiator Cores - 01 Loco Sets 8. Radiator Fan Assembly And Complete Drive Units- 01 Loco Sets 9. Traction Motors- 06 Nos (01 Loco Set) ,10. Rectifier Units Complete - 01 Loco Set ,11. All Small Rotating Equipment Intact - 01 Loco Set, 12. Power Cable & Control Cable- 01 Loco Set,13. E. Power Contactor -01 Loco Set, 14. Battery- 08 Nos (01 Loco Set) Condition - [1]as Is Where Is Basis[2]cutting Allowed. [3] Wheel Sets 06 Sets, Axle Box 06 Pair & Bull Gear 06 Nos. Are Excluded From Sale. Excluded Item To Be Returned To The Custodian In Good Condition By The Purchaser At The Time Of Delivery. 4.the Purchaser Should Visit The Condemned Loco As Well As Its Actual Location Before Bidding, 5. The Scrap Loco Is Sold On As Is Where Is Basis Therefore Railways Does Not Guarantee For Quality Or Quantity As Per Description Etc. And Railways Is Not Responsible For Any Type Of Shortage During Delivery, 6.dismantling And Cutting Is Permitted For Loading And Delivery Purpose, 7. The Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles/vehicle And Necessary Trained Men For Cutting And Dismantling The Components Of The Condemned Loco As Per Requirements, 8. The Purchaser Is Required To Stack All The Reclaimable/excluded Items At One Location Well Away From The Cut Up Parts Of The Locos And It Is Required To Be Returned To The Custodian Before Affecting The Delivery. Purchaser Should Take Adequate Precaution During Dismantling Of Excluded Fittings Item So That The Same Can Be Return Over To The Custodian In A Sound, Undamaged And Intact Condition Otherwise Railway Reserve The Right To Recover The Amount Against Damaged Item Prior To The Delivery, 9. The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In The Near Vicinity Of Cutting Spot Are Damaged In Any Way. The Purchaser Will Be Held Responsible For Any Damage/fire Accident To The Railway Property Caused During Cutting Operation Or Delivery, 10. It Is The Responsibility Of The Purchaser To Segregate And Remove The Unwanted And Leftover Scrap Before Completion Of Delivery Of Loco. Purchaser Has Also To Keep The Cutting And Loading Spot Neat And Clean, Otherwise He May Be Penalized By The Railway, 11. The Purchaser Has To Comply All The Rules And Regulation Of Pollution Control Board Prevailing/existing In The Cutting Spot During Cutting And Dismantling Operation Of Condemned Loco, 12. The Purchaser Should Be Aware Of The Fact That Total Wt. Shown Against Heading [lot Wt. In Mt] In Lot Details Page Under Ireps Portal Is Indicative Only Against This Lot And Purchaser Should Note That During Delivery Of The Lot, The Above [lot Wt. In Mt] In Lot Details Page Is Not To Be Taken Into Consideration, 13. Bidders Are Required To Check The Detailed Conditions And Amendments / Modifications If Any, In Special Condition And In Depot Condition Against Each Lot Online For The Lot/catalogue Published For E-auction Purpose Before Bidding. Before Bidding Bidders Are Also Advised To Inspect And Tally Every Details Of The Lot Including Description, Location, Quantity, State, Hsn Code, Gst Percentage Etc With The Actual Material On Ground As Per Offer Kept With The Custodian And If Any Discrepancies Is Found, It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office For Further Action. No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale, 14.gst, Actual Tcs And Other Taxes Will Be Calculated At The Time Of Preparation Of Challan For Final Deposition Of Bsv.