Power Cable Tenders

Description: Surplus Condomned Loco No 14899 Wdg3a, With Ferrous And Non Ferrous Attachment. Weight Of This Loco Has Been Taken As Per Dlw/bsb L. No. Dlw/d&d/gen/rly Board Policy/pt-1 Dt 09.10.20. Loco Condemded Vide Railway Board Letter No 2021/m(l)/731/20 Date 08.06.23. Scrap Detail Of Ferrous And Non Ferrous Attachment:- 1. Ferrous = 110.199 Mts. 2. Copper= 5.978 Mts. 3. Brass=0.080 Mts 4. Aluminum= 0.642 Mts 5. Insulating /rubber = 0.563 Mts . Total Qty= 01 Nos, Total Weight= 117.462 Mts Approx. For Stockholder Information Ss 11 No Nkj/sse/loco/2024-25/61 Dt 29.01.25. G27fs- 152664 Dated 28.01.25. Mode Of Delivery By Number Only. (note:- 1. Power, Carbody And Grids Cable 218 Meter Approx Are Not Available In The Loco As Per Joint Inspection Report Dt 25.01.25 Of Committee Nominated By Sr Dee Trs Nkj, 2. Cutting Could Permited For Easy Loading At Railway Area, 3. The Loco Has Been Stable Condition For More Than 3 Years, Hence Purchasers Should Visit The Lot Location/position Before Bidding. 4. The Scrap Loco Is Sold On "as Is Where Is Basis" Therefore Railways Do Not Gurrantee For Quality & Quantity As Per Description & Railway Is Not Responsible For Any Type Of Shortage During Delivery. 5. All Wheel Sets Are Included & Batteries Are Also Included If Available.)

Description: CATEGORY: Taking down of light fittings of any type size and model complete all as specified. , Taking down of brackets of any type size and model complete all as specified and directed. , M and L in repair steel tubular swaged poles complete with cast iron base plate finial taper plug bolts nuts , M and L in repair steel tubular swaged poles complete with cast iron base plate , Re fixing of LED street light fittings of any wattage outdoor type complete all as specified and directed. , Supply and fixing in repair LED street light fitting 120 Watt 230 V AC outdoor type , Supply and fixing in repair LED flood light 80 watt 230 V AC outdoor type with thermal management in multiple optics , Supply and fixing in repair LED flood light 150 watt 230 V AC outdoor type with thermal management , S and F Cable Junction Box 155X210X92 mm in size made out of thermoplastic aving IP 66 protection , Supply and passing through steel tubler pole service connection 1100 volts grade multicore FR round insulated copper conductor , S and F single arm bracket made of 40mm dia 1.0mtr long for security light with mounting MS clamp , S and F in repair Rigid non metallic PVC conduit of dia 20 mm exclusive of boxes junction terminal , M and L for earthing complete with MS galvanized plate of size 60cmx60cmx6mm as earth electrode buried directly in ground earth pit not less than 2.25 mtrs , Taking down out unserviceable or serviceable UG Cables of any Cross Sectional Area and Connections including Bricks GI Pipe etc. , Excavating in Trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth Taking Out and Laying of Cables etc. , Returning Filling in including Spreading Levelling Watering and Well Ramming in Layers not exc. 250mm in Soft Loose Soil complete all as specified , Removing excavated Materials Soils not exc. 50.00 mtr , M and L Sand Cushioning dry in Trenches for protec tion of UG Cables , M and L for fly ash bricks locally available laid dry width wise across the line of cable , Supply and laying for cable in trenches or passing through pipe XLPE insulated heavy duty , Supply and laying for cable in trenches or passing through pipe XLPE insulated 10 sqmm 4 core. , Re Laying Fixing or Passing through Pipe XLPE insulated Armoured Electric Power UG Cable 10 Sqmm 2 Core to 25 Sqmm 4 Core , S and F 40 mm High density polyethylene pipe HDPE of pressure rating 6 kgf cm2 fixed complete to walls , S and F Galvanised Iron Pipe 40mm Bore dia Light Grade for protection of UG Cable laid in Floors , Labour only for Horizontal Boring for Passing Protection Pipe up to 80mm Bore , M and L for PCC 1.2.4 type B1 using 20 mm graded aggregate , M and L for PCC 1.3.6 type C2 using 40 mm graded aggregate as in foundation for pole etc complete , S and F HDPE DWC Double Walled Corrugated of Diameter 25 mm including , M and L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground , Crimping Tools (Q3)

Description: Surplus Condomned Loco No 14874 Wdg3a, With Ferrous And Non Ferrous Attachment. Weight Of This Loco Has Been Taken As Per Dlw/bsb L. No. Dlw/d&d/gen/rly Board Policy/pt-1 Dt 09.10.20. Loco Condemded Vide Railway Board Letter No 2021/m(l)/731/20 Date 08.06.23. Scrap Detail Of Ferrous And Non Ferrous Attachment:- 1. Ferrous = 110.199 Mts. 2. Copper= 6.146 Mts. 3. Brass=0.080 Mts 4. Aluminum= 0.642 Mts 5. Insulating /rubber = 0.605 Mts . Total Qty= 01 Nos, Total Weight= 117.672 Mts Approx. For Stockholder Information Ss 11 No Nkj/sse/loco/2024-25/62 Dt 29.01.25. G27fs- 152665 Dated 28.01.25. Mode Of Delivery By Number Only. (note:- 1. Power, Carbody And Grids Cable 158 Meter Approx Are Not Available In The Loco As Per Joint Inspection Report Dt 25.01.25 Of Committee Nominated By Sr Dee Trs Nkj, 2. Cutting Could Permited For Easy Loading At Railway Area, 3. The Loco Has Been Stable Condition For More Than 3 Years, Hence Purchasers Should Visit The Lot Location/position Before Bidding. 4. The Scrap Loco Is Sold On "as Is Where Is Basis" Therefore Railways Do Not Gurrantee For Quality & Quantity As Per Description & Railway Is Not Responsible For Any Type Of Shortage During Delivery. 5. All Wheel Sets Are Included & Batteries Are Also Included If Available.)

Description: 781008110032 interio Furniture.mingle Unitized Mem_10 Seater Ta.supplying And Placing In Position Meeting Ta ble Of The Following Specifications With Overall Size Shall Be 2100 X 1150 X740.work Top--made Of 25mm Thick M df-one Side Pre-laminate Board Conforming To Is-14587:1998 With 0.4mm Pvc Membrane Pressed On To Top And having Chamfered Edge. Soft Closing Dual Access Flap Provided For Access To Power Supply And Data Cables.unde rstructure-the Under-structure Consists Of Mixture Of 25mm And 18mm Pre-laminated Twin Board Of E1-p2 Grade and Approved Shade Conforming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Anodise d Aluminium Alloy 63400 - Wp Profile Is Added At Bottom Edges For Improving The Aesthetics.the Product Has A K nock-down Construction.wire Management-a Wire Raiser Made Of 0.8mm Crca Ms Is:513. It Is Epoxy Polyester P owder Coated (dft 40-60 Microns) For Flow Of Wires And Cables. A Power Box With 2 Cutouts On Either Sides For St andard 8 Module Anchor Roma Is Provided. Beside Each Cutout, An Additional Cutout With Plate Is Provided For M ounting Audio Visual Cables(eg. Hdmi,vgaa, Etc). Product Is Having Greenpro , Greenguard , Griha , Scs Indoor A dvantage Certification.make:godrej,nilkamal,featherlite. [ Warranty Period: 12 Months After The Date Of Delive ry ] ] consignee Sse/w/clt, Sr Kerala 1.00 Numbers

Details: Description:- Supply Of All The Items /equipment/accessories For Meeting The Requirement Of electronic Interlocking (ei) At New Madar And Associated Indoor Works Considering Following Scope - electronic Interlocking Work At New Madar Station And Splitting Of New Kishangarh-new Saradhana automatic Block Section Into Two Block Section Viz. New Kishangarh - New Madar And New Madar- new Saradhana. Signal Interlocking Work Is To Be Carried Out For New Madar Station As Per Sip commissioning Of The Above Work With Adjacent Automatic Block Sections. Sip Of New Madar Will Be provided. The Scope Includes All Indoor Works (except Termination Of Outdoor Cables), Power Supply system, Msdac System For Track Detection With Design, Supply And Installation Of All Required Indoor andoutdooraccessories/hardware/equipment/tracksidedevices,configuration,software installation, Testing And Commissioning Of Signal Interlocking Arrangement With Controlled Gears At newmadarandautomaticblocksectionworkingwithadjacentstationsasperapprovedsip. payment Will Be Made After Receipt Of All The Materials As Per Respective Design.

Details: CATEGORY: FM Tx 50W , Audio Processor , Light weight corrosion resistant FM antenna with power splitter , Antenna Connector Cable , 9 RU Rack , Dummy Load 250W , 12 Channel on Air Broadband Console , Studio Monitor 50W , Dynamic Cardiod Microphone Vocal , RJ Mic Condenser , Desktop Computer , Studio Headphone , On Air Monitoring setup Logger Software , RJ Mic Stand , Table top Mic Stand , Portable Solid State Field Recorder , Audio Distribution Amplifier , Headphone Distribution Amplifier , Hybrid Telephone , Self Supported Tower 30m , 10 KVA Online UPS , 10 KVA Generator , Installation and Commission

Description: CATEGORY: Taking down of light fittings of any type size and model complete all as specified , Taking down of brackets of any type size and model complete all as specified , M and L in repair steel tubular swaged poles complete with cast iron base plate finial taper plug , M and L in repair steel tubular swaged poles complete with cast iron base plate, finial taper plug , Re fixing of LED street light fittings of any wattage outdoor type complete all as specified and directed. , S and F in repair LED street light fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing , Supply and fixing in repair LED flood light 80 watt 230 V AC outdoor type with thermal management in multiple optics and equipped , S and F in repair LED flood light 150 watt 230 V AC outdoor type with thermal management in multiple optics and equipped , S and F Cable Junction Box 155X210X92 mm in size, made out of thermoplastic having IP 66 protection for outdoor installation fixed with 4 way , Supply and passing through steel tubler pole service connection 1100 volts grade multicore FR round insulated copper conductor , S and F single arm bracket made of 40mm dia 1.0mtr long for security light with mounting MS clamp , S and F in repair Rigid non metallic PVC conduit of dia 20 mm exclusive of boxes junction terminal but inclusive of all , M and L for earthing complete with MS galvanized plate of size 60cmx60cmx6mm as earth electrode buried directly in ground , Taking down out unservicable or servicable UG cable of any cross section area and connection etc. , Excavating in Trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth , Returning Filling in including Spreading, Levelling Watering and Well Ramming in Layers not exc. , Removing excavated Materials Soils not exc. 50.00 mtr and depositing where directed at a level not exc. , M and L Sand Cushioning dry in Trenches for protection of UG Cables below above and around the UG Cable , M and L for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of UG cable , S and L for cable in trenches or passing through pipe, XLPE insulated 25 sqmm 4 core. , S and L for cable in trenches or passing through pipe, XLPE insulated, heavy duty, galvanised steel strip or wire armoured electric LT cable 10 sqmm 4 core. , Re laying fixing or passing through XLPE insulated armored electric power UG cable etc. , S and F 40 mm High density polyethylene pipe HDPE of pressure rating 6 kgf cm2 fixed complete to walls ceilings or in floors etc. complete all as specified and directed . , S and F Galvanised Iron Pipe 40mm Bore dia Light Grade for protection of UG Cable laid in Floors , Labour only for Horizontal Boring for Passing Protection Pipe up to 80mm Bore dia under Road Foot Path, not exc. 10.00 mtr , M and L for PCC 1.2.4 type B1 using 20 mm graded aggregate as in coping for pole including form work and finishing the surfaces , M and L for PCC 1.3.6 type C2 using 40 mm graded aggregate as in foundation for pole etc complete all as specified and as directed. , S and F HDPE DWC Double Walled Corrugated of Diameter 25 mm including disconnection and connection of cable. , M and L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn , Wrecking Crow Bar or Claw Bar as per IS 706 (Q3)

Description: CATEGORY: Taking down of light fittings of any type size and model complete all as specified , Taking down of brackets of any type size and model complete all as specified , M and L in repair steel tubular swaged poles complete with cast iron base plate finial taper plug bolts nuts and screws as specified , Re fixing of LED street light fittings of any wattage outdoor type complete all as specified and directed. , S and F in repair LED street light fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing. , S and F in repair LED flood light 80 watt 230 V AC outdoor type with thermal management in multiple optics and equipped , S and F in repair LED flood light 150 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection , S and F Cable Junction Box 155X210X92 mm in size made out of thermoplasti having IP 66 protection for outdoor installation fixed with 4 way bakelite cable terminals , Supply and passing through steel tubler pole service connection 1100 volts grade multicore FR round insulated copper conductor , S and F single arm bracket made of 40mm dia 1.0mtr long for security light with mounting MS clamp , S and F in repair Rigid non metallic PVC conduit of dia 20 mm exclusive of boxes junction terminal but inclusive of all tees bends elbows , M and L for earthing complete with MS galvanized plate of size 60cmx60cmx6mm as earth electrode buried directly in ground , Taking down out unserviceable or serviceable UG Cables of any Cross Sectional Area and Connections including Bricks , Excavating in Trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth Taking Out and Laying of Cables etc. , Returning Filling in including Spreading Levelling Watering and Well Ramming in Layers not exc. 250mm , Removing excavated Materials Soils not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above , M and L Sand Cushioning dry in Trenches for protection of UG Cables , M and L for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of UG cable , S and L for cable in trenches or passing through pipe XLPE insulated wire armoured electric LT cable 25 sqmm 4 core. , S and L for cable in trenches or passing through pipe XLPE insulated heavy duty galvanised steel strip or wire armoured electric LT cable a 10 sqmm 4 core. , ReLaying Fixing or Passing through Pipe XLPE insulated Armoured Electric Power UG Cable Heavy Duty , S and F 40 mm High density polyethylene pipe HDPE of pressure rating 6 kgf cm2 fixed complete to walls ceilings or in floors etc. , S and F Galvanised Iron Pipe 40mm Bore dia Light Grade for protection of UG Cable laid in Floors , Labour only for Horizontal Boring for Passing Protection Pipe up to 80mm Bore dia , M and L for PCC 1.2.4 type B1 using 20 mm graded aggregate as in coping for pole including form work and finishing , M and L for PCC 1.3.6 type C2 using 40 mm graded aggregate as in foundation for pole etc complete all as specified and as directed. , S and F HDPE DWC Double Walled Corrugated of Diameter 25 mm including disconnection and connection of cable , M and L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground , Wrecking Crow Bar or Claw Bar as per IS 706 (Q3)

Description: CATEGORY: Arduino UNO R3 , Arduino Nano , Raspberry Pi 3 , Arduino Mega , Breadboards 800 and 400points , Berg Strip FandM , Zero PCB , 16x2 LDC Display with I2C module , USB Cables , 9V Battery , Resistors capacitor linear voltage regulator Kit , Water Pump Module , Piezoelectric Plate , 8x8 LED Matrix Module , Bluetooth Module , 7 Segment LED Display , GSM Module , GPS Module , Laser Diode Emitter , LDR Module , Keypad , Joy Stick , Active Buzzer , Motor Driver L298P , Sound Playback Module , ESP 32 , Vibrating Motor , Alligator Connector , DC Jack Male and Female , LED , IC LM555 , Diode and Transistor Kit , Button Switch Set , Touch Module , Battery Clip , IR Sensors , Triple Axis Magnetometer , MQ Sensor , IR Transmitter and Receiver , Ultrasonic Sensor Module , Triple Axis Accelerometer , Pulse Rate Heart Sensor , Relay module , Sound Module , IOT sensors , Power Bank Module , Stepper Motor , DC Motor , Servo Motor , DIY kit , 3D printer , Cardboard , stationary iteam , Wood Glue 500ml , Hacksaw Frame , Mini Hacksaw Frame , Tweezer Set , Steel Shaft Claw Hammer , C-Clamp , Allen key Set , Drill Machine Set , Workstation For Drilling , Spanner Set , Vice Normal , Precision Screw Driver , Wire Stripper , Screwdriver , Cordless Rotary Multitool Set , Air Blower , File Set , Mini File Set , Flexible Cutting Mat , Plastic Storage Drawer , Pegboard , Hot Glue Gun , Digital Oscilloscope , Soldering Kit , Adapter , Electric Screw Driver , Dual Temperature Heat Gun , Soldering helping Hand , Stainless Steel Rule , Digital Vernier Caliper , Digital Multimeter , DIY Paper Microscope , Telescope , Sewing Kit , Glue Stick , Cable Tie , Power Strip Adapters , Bulb Holder , Electric wires 20M , First Aid Kit , Fire Extinguisher , Safety item , Furniture , Chairs , Storage Cabinet , solar trainer kit

Details: Supply Of Switch Board Cabinet For Lhb Eog Ac Coaches To Rdso Specn.no.rd so/pe/spec/ac/0184-2015 (rev-1). Note: I) Mpcb#s For Water Pumps 1&2, Condenser & Ventilation Fan motors Ratings Shall Be Provided As Per Rdso Ltr.no.el/7.1.108/sbc Dt.01-05-2023. Ii) The Compressors , Heater Circuits Wiring Shall Be Provided With 4 Sq.mm Cable & Suitable Cage Clamp Terminal Blocks For 4sq.mm Cable (block Nos. 239-241, 243-245, 259-261, 263-265, 242 & 262). Rbc & Ebc (s1f160 & S1f 170) Circuit Wiring Shall Be Provided With 6sq.mm Cable And Suitable Cage Clamp Terminal Blocks (in S1 x3) For 6sq.mm Cable. Iii) Mounting Details For Rmpu Switch Panel & Stiffeners Shall Be Provided As Per drawing No. Icf/sk3-7-2-062 Alt- A Or Latest. Iv) 8 Nos Of Crimping Sockets Shall Be Supplied With Discon necting & Earthing Device As Follows. A) For Schaltbau Make D&e Device Crimping Sockets To Drg. No. icf/sk-7-2-166 Alt-w, Type-d10/38, Bend-90 Degree. B) For Salzer Make D&e Device Crimping Sockets T o Item-10 Of Edts-200 (latest). V) Note.no-4 In Rdso Drg.no.rdso/pe/sk/0205-2019 (rev-1) Sheet 2 Of 16 Shall Be Read As #pg29 Suitable End Fitting For Power & Control Cables Shall Be Used#. Vi) Packing In struction: Pi-115 Ver. 3.0