Paint Tenders

Description: Condemned Casnub Bogie Complete With Bolster (without Springs) (wm, Nlb And Hs Type) - Total Lot Qty: 24 Nos.(43.200 Mts) Remarks: 1. Lot Is Approachable By Road 2. Delivery Will Be On Number Count Basis 3.similar Type Of Material Is Laying Near Me Lot Is Verified And Accounted For By Stock Holder 4. The Quantity Is Physically Available. 5. The Lot No. Has Been Painted 6. Certified That The Above Scrap Material Are Not Useful For Railway Use. 7. The Lot Is Ok For Sale. Sanction Of Competent Authority Has Been Obtained On Ss11 8. After The Joint Lot Inspection If Any Addition, Deletion, Alteration And Variation Come In Lot, Stock Holder Will Be Fully Responsible. 9. Certified That No Unverified Material Is Laying Near The Lot. 10. Stock Holder Is Responsible For The Assessment Of The Quantity In The Lot. 11. Similar And Other Type Of Material Are Laying Nearby Lot Will Not Be Delivered. 12. It Is Strictly Advice To Bidder To See The Lot Personally Before The Bidding For The Lot. 13.gas Cutting Permission Will Be Given To The Purchaser From 8am To 5pm After Handing Over Of The Lot To The Purchaser 14.safety Of The Cutting Workers Will Be Born By The Purchaser Or Representative Of The Purchaser 15. Items Marked On Nfs (not For Sale) Will Not Be Delivered To Purchaser. Location: Scarp Yard ,c&w Depot Daund

Description: Various Type Of Released Galvanized Steel/galvanized Iron Material As Scrap Of Ohe Part - (1) Released Cross Arm Assembly Set - 232.716 Mts (2) Released 'y' Type Drop Arm 16.675 Mts (3) Released 9 Tone Channel-3.168 Mts (4) Released B- 200 Mast, B-250 Mast, T-150 Mast And Draft Mast - 23.829 Mts. Total Lot Qty: 276.388 Mts (approx) Remarks: 1) Approach Road Is Available. 2. Delivery On Actual Weighment Basis. On Only At On Bridge Govt. Approved Weigh. 3. The Quantity Is Physically Available. 4. The Lot No. Has Been Painted. 5. The Lot Is O.k. For Auction Sale. While Cutting All Safety Norms Should Be Adopted By The Purchase 6. The Stock Holder Is Responsible For Any Alteration, Deletion & Variation In The Lot After Joint Inspection, If Any Found Subsequently 7. Items Marked Nfs (not For Sale) Will Not Be Delivered To The Purchaser. 8. Weighment On The Departmental Weighing Machine Or Government Approved Weighing Machine Responsibility 9. Any Weight Diff Between Actual And On Ds/8 Note &ss-11 Will Be The Responsibility Of Stock Holder. 10. If Purchaser Request For Cutting Permission For Easy Loading Purpose, The Same May Be Given Duly Obtaining Competent Authority's Sanction. 11. Purchesers/bidders Are Requested To Inspected Lot Material Before Bidding.

Description: Released Misc. Ferrous Melting Scrap Components Released From Wagons Including Various Liners, Knuckle, Cp Top/bottom Base, Lock Lift Assly. Lock Piece, Coupler Rod, Knuckle Pin, Springs, Adapter Etc. Total Lot Qty: 25 Mts. Remarks: 1. Lot Is Approachable 2. Delivery Will Be On Actual Weighment Basis On Nearest Govt. Approved Weighing Machine. 3.similar Type If Material Is Laying Near The Lot Is Verified And Accounted For By Stock Holder 4. The Quantity Is Physically Available. 5. The Lot No. Has Been Painted On Lot 6. Certified That The Above Scrap Material Is Not Useful For Railway Use. 7. The Lot Is Ok For Sale. Sanction Of Competent Authority Has Been Obtained On Ss11 8. After The Joint Lot Inspection, If Any Addition, Deletion, Alteration And Variation Come In Lot, Stock Holder Will Be Fully Responsible. 9. Certified That No Unverified Material Is Laying Near The Lot. 10. Stock Holder Is Responsible For The Assessment Of The Quantity In The Lot. 11. Similar And Other Type Of Material Are Laying Nearby Lot Will Not Be Delivered. 12. It Is Strictly Advice To Bidder To See The Lot Personally Before The Bidding For The Lot And Its Approach. 13- Nps-items Will Not Be Delivered To The Purchaser. 14. Any Weight Difference Between Actual Weight And On Ds-8&s-11 Will Be The Responsibility Of The Stockholder . Location: Roh Shed Daund Premises

Description: CATEGORY: Leisure Silca Sand 40 Foot Length x30 Foot Widget x 8 Inch Depth , 4 Men vertical Rope with 150 HC and Horizontal Pipe 150 Dia 10 Feet Height x 10 Feet Widget , 42 Dia Pipe and 74 Dia Pipe Thickness two and half mm for hand walk Bar Verical Pipe And Horizontal Pipe Joint with Drilling , Punching Bag , 42 Dia Pipe and 74 Dia Pipe Thickness Two and half mm for Chin Up Bar Vertical Pipe and Horizontal Pipe joint 8 feet x 10 feet size 180 cm , 30 Feet 4 Inch Pipe for Pillars , Truss Three x one and Half inch Pipe 62x2 Feet Size , Parlin 3x1 and Half inch Pipe 60 Feet Length , 10 mm Base Plaste 12x12 inch Size , CGI Sheet Half mm 22 x 4 25 Feet Size , Nuts and welding material , Labour Charges per feet Installation , Seating Area 50x6 feet x 2 Side Area with Double Stairs , Stage 10 Feet Length x 6 Feet Wid x 5 Feet Height , Synthetic Material Wall 6 Feet Height x 260 Running Feet Area , Painting work at iron stracture

Description: Scrap Turning Boring Material Of All Shorts And Size, Muddy, Broken With Minor Ms Scrap Of All Short & Size, Complete-incomplete Symmetrical-unsymmetrical Broken Pieces In Rusty And Corroded Condition . Total Lot Qty: 10 Mts. Remarks: 1. Lot Is Approachable 2. Delivery Will Be On Actual Weighment Basis On Nearest Govt. Approved Weighing Machine. 3.similar Type If Material Is Laying Near The Lot Is Verified And Accounted For By Stock Holder 4. The Quantity Is Physically Available. 5. The Lot No. Has Been Painted On Lot 6. Certified That The Above Scrap Material Is Not Useful For Railway Use. 7. The Lot Is Ok For Sale. Sanction Of Competent Authority Has Been Obtained On Ss11 8. After The Joint Lot Inspection, If Any Addition, Deletion, Alteration And Variation Come In Lot, Stock Holder Will Be Fully Responsible. 9. Certified That No Unverified Material Is Laying Near The Lot. 10. Stock Holder Is Responsible For The Assessment Of The Quantity In The Lot. 11. Similar And Other Type Of Material Are Laying Nearby Lot Will Not Be Delivered. 12. It Is Strictly Advice To Bidder To See The Lot Personally Before The Bidding For The Lot And Its Approach. 13- Nps-items Will Not Be Delivered To The Purchaser. 14. Any Weight Difference Between Actual Weight And On Ds-8&s-11 Will Be The Responsibility Of The Stockholder . Location: Roh Shed Daund Premises

Details: Urgent repair work including painting to the stair blocks and toilet lobby and some allied work at the main office building of West Bengal State Co-Operative Union at DD-18/6, Sector –I, Salt Lake City, Kolkata-700064 during the year 2024-2025.

Details: Urgent repair work including painting to the stair blocks and toilet lobby and some allied work at the main office building of West Bengal State Co-Operative Union at DD-18/6, Sector –I, Salt Lake City, Kolkata-700064 during the year 2024-2025.

Details: -A/R & M/O HPPWD Rest house at Khadrala (SH- C/O painting work, Polishing work and Lining work in Veranda & kitchen, F/C , U-Shape Drain and steel work and wall lining & Protection wall in back side of HPPWD Rest House at Khadrala.)

Details: Description :6 Compartment Steel Clothes Locker H 1800 Mm X W 1100 Mm X D 550 Mm. Material : M.s Sheet Conforming To Commercial Quality Cr- 1,grade 340 Of Is 513:2008 (reaffirmed 2013)(fifth revision)amdt. No.1. Sheet Thickness Of Body, Back Shelves And Pedestal And Door (mm)(+/- 5% )-2. 0 Mm. Stiffened Pedestal Height In Mm (+/-5 Mm) -175 Mm. Handle %u2013 Electroplated Mild Stee l Handle. Paint- Powder Coated. Colour- Ash Gray . Locks - Both Inbuilt And Hasp. Each Compartment partition Along The Width Wise. Warranty Period- 24 Months From Date Of Supply. Firm's Offer : As A bove Make/brand : :om Woods [ Warranty Period: 24 Months After The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permi tted: Max 8 Lacs ] ]

Details: Description :ventilation Fan Impeller For Garibrath Power Car Suitable For 5 Kw Abb Make Motor As Per Rdso Specificatio n No. Edts-102-rev.d Technical Specifications: - (a) Impeller Wheel Suitable For Modified Ventilation Fan For Power Car Al ong With Ms Drive Hub To Couple With The Drive Motor. (b) Material Of : Ms Inlet And Back Plate Deep Drawn For Stiffness 10 Single Profile Back. (c) Construction ; Curved Vanes With Additional Stiffness Duly Welded To The Above Plates. (d) Cri tical Speed : Rated To Operate At Speeds Not Exceeding 4500 Rpm (e) Air Volume Rating : 20000 Cmh (f) Balancing :impeller A long With The Drive Hub Is Dynamically Balanced With The Aid Of The Machine To G 6.3 As Per Iso Standards. (g) Finish : Syn thetic Enamel Paint Finish Of Either Light Grey.as Per Is 630 Shade. [ Warranty Period: 30 Months After The Date Of Delivery ] ]