Paint Tenders

Description: Painting, Plastering, Artwork, Writing, And Other Work In The Financial Year 2025-26

Details: Supply and Delivery of 120 Nos. LT Distribution Kiosks for double feeder arrangement suitable for 63kVA DTR Sub Station with configuration of 915mm(L)X650mm(H)X450mm(B) dimensions having main sturcture of 35mmX35mmX5mm M.S Angle. Five sides of the box should be covered by 75mmX25mmX3.25mm BRC net and top side should be covered by 915mmX450mmX18 swg M.S.Sheet. On the front side, ther should be a provision for holding shutter and to be rested on 02 nos 12.5mm dia hollow pipe. Structure farm of the folding shutter are to be made with 25mmX25mmX5mm M.S.Angle. Other fittings are to be supported by 70mmX3mm M.S.Flat for fixing 10 Nos Aluminium bus bar(03 nos of 40X10X250mm, 06 nos of 40X10X125mm & 01 nos of 25X6X250mm) with necessary arrangement for G.I. Bolt & Al. Long Barrel Dewell’s Make 120 sqmm socket, nut, wahser including earthing arrangements as per regard of the box. The boxes are to be printed with one coat offered primer and two coats of synthetic enamel Grey Paint(Mat Code : 0407010741) under Nakashipara Division, Supermarket, P.O. Bethuadahari, Dist. Nadia, Pin 741126.

Description: Repair Maint And Painting Of Steel Furniture At Chakabama Mil Stn Under Age (i) Zakhama

Details: Supply and Delivery of 110 Nos. LT Distribution Kiosks for double feeder arrangement suitable for 100 kVA DTR Sub Station with configuration of 915mm(L)X650mm(H)X450mm(B) dimensions having main sturcture of 35mmX35mmX5mm M.S Angle. Five sides of the box should be covered by 75mmX25mmX3.25mm BRC net and top side should be covered by 915mmX450mmX18 swg M.S.Sheet. On the front side, ther should be a provision for holding shutter and to be rested on 02 nos 12.5mm dia hollow pipe. Structure farm of the folding shutter are to be made with 25mmX25mmX5mm M.S.Angle. Other fittings are to be supported by 70mmX3mm M.S.Flat for fixing 10 Nos Aluminium bus bar(03 nos of 40X10X250mm, 06 nos of 40X10X125mm & 01 nos of 25X6X250mm) with necessary arrangement for G.I. Bolt & Al. Long Barrel Dewell’s Make 120 sqmm socket, nut, wahser including earthing arrangements as per regard of the box. The boxes are to be printed with one coat offered primer and two coats of synthetic enamel Grey Paint(Mat Code : 0407010541) under Nakashipara Division, Supermarket, P.O. Bethuadahari, Dist. Nadia, Pin 741126.

Description: Scrap Mild Steel Angle, Channel, Tank Plate And Tie Bar, Ms Bar, G.i. Pipe Mix & C.i. Mix Plate. All Type Misc. Etc. Lot Quantity 45.00 Mts (approx) 1. Lot Is Exhibited / Painted. 2. Similar And Other Type Of Material Are Lying Nearby Lot Will Not Be Delivered. 3. If Any Other Material Found Nearby The Lot It Will Not Be Delivered. 4. Delivery Will Be Given On An Actual Weighment Basis Govt Approved Weigh Bridge. 5. It Is Strictly Advised To Bidder To See The Lot Personally Before Biding For The Lot. 6. After The Joint Inspection, If Any Addition, Deletion, Alteration And Variation Come In The Lot Stock Holder Will Be Fully Responsible. 7. Cutting, Dismantling May Be Allowed For Easy Loading Purpose At The Cost And Risk Of Purchaser. 8. Purchaser Should Ensure That During Cutting Dismantling No Nearby Structures Building Should Be Affected. Purchaser Will Be Fully Responsible For Any Mishaps. Trains Operations And Other Railway Work Should Not Be Disturbed And Suitable Banners At Work Place Has To Be Arranged By Purchaser.

Details: Construction of Dehra Dam on Dehra Nala, tributary of Bina River having Minimum gross capacity of 72.36 MCM & Semraghat Weir on Dhasan River of Minimum capacity of 6.51 MCM on turnkey basis with maximum total submergence of 1034 Ha land, 4 MW Power House at Dehra Dam, Feeder channel with regulating structure from Dhasan river to Dehra nala comprising of detailed survey, preparation of Construction design, drawings and obtaining approval of all construction design, drawings from the competent authority including construction of all civil, mechanical, and electrical works involved in the construction of Dam, Weir & Power House. The work includes survey of Head Work, Power house, Feeder channel and Submergence with Fixing of Chainage cum Boundary Stone, geological investigations, hydrology approval, preparation, and submission of complete Land Acquisition (LA) cases to competent authority for land acquisition of dam seat, Feeder channel , Power house and submergence area and perusing LA cases for award, forest clearance, environmental clearance(if required), NHAI clearance, and all other clearances which are required for dam and weir construction. Construction of permanent two lane CC road for dam approach from SH or NH road, Concrete Overflow block, Non-over flow blocks including power block, Energy Dissipation arrangement, earthen dam including river training and construction of coffer dam, provision of environmental sluice and Radial gates with hoisting arrangements, Stop log arrangements, gantry crane with rails arrangement, RCC T beam Deck slab bridge with minimum 6.5 meter width and foot bridge etc. and hoist supporting structures with primer anti corrosive and painting necessary as per IS CODE for all component of steel structure involved in construction, including removal of defect for 60 months in defect liability period, model study of the project Construction, Planning & Design of control room, Guest House, staff room and chaukidar quarter Building with supply of generator and procurement, supply and erection of DG set with required capacity for operation of all gates with one stand by generator and maintenance of all components for five years after completion of the project, including dam break analysis, Emergency action plan (EAP) preparation, gate operation manual, instrumentation in dam for monitoring and any other work as directed by the Engineer-in-Charge as per details given in scope of work. The work also includes Watch and ward, Management, Operation and Maintenance (MOM) for the Period of 60 months for dams, weir including its all component and 120 months for power house including its all components.

Description: "brushes Paint And Varnish Flat Size 38 Mm Of ""rubber Set Conforming To Is: 384/2012 Part-1 Or Latest"" And Bristles As Per Is-1844/1993 Note To Tenderers:-(1) To Submit 04 Nos. Of Samples Along With Offer For Testing Failing Which Offer Will Be Passed Over. (2) This Item Is Reserved For Nsic Registered Firms Only

Description: CATEGORY: Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - Biennial Rate Contract for Reconditioning Painting Hydrotesting of DCP CO2 and Mechanical Foam Type Fire Extinguishers; Biennial Rate Contract for Reconditioning, Painti..

Description: CATEGORY: OSAERO PAINTING AND STENCILING ACTIVITIES OF AIRCRAFT AS A PACKAGE REF FSP2420

Description: Cond. & U/s Ferrous Scrap In Corroded Nature Such As Head Stock, Foot Steps, Berth Frame, Roller Shutters, Corroded/dinged/damaged Wagon Door, Zinc Coated Fs Sheets, Base Plates, Ms/gi Sheets In Full/cut/damaged/rusted/ Corroded/crushed Condition, Wagon Floor Sheet, Coach Door, Sliding Door Of Various Sorts & Sizes, Battery Boxes, Battery Box Door, Collapsible Gate, Punches Plate/sheet/screen, Corroded Shear Cutups, Galvanised Sheets Rusted Condition, Roof Light/tube Light Fitting With/without Ballast, Fl Housing, Tl Patti, Crushed Drums, Cfl Frame, Regulator Box, Ms Gutter, Corroded Fabrication Scrap, Carriage Fan Body Cover/end Shield/ Guard/ Blade, Pedestal Fan Guard, Air Brake Pipes, Corr. Barrels/paint Drums, Silent Block, Anchor Block, Wires, Chains, Boxes, Hoop Iron, Lamps, Wall Protector, Trough Sheets, Air Filter, Clips, Panels, Corroded Gi Pipes With/without Valves, Gi Duct, Ci Covers, Corroded/damaged/dinged Condition Coach/ Wagon Cutup Parts, Sheets, Equalizing Stay, Brake Anchor, Pre Cooling Outer Enclose, Corroded Round/square Pipes, Pipe Wrench In Corroded Condition, Commode Chutes, Pins, Rivets, Bolts, Nuts, Small Iron Pieces, Wire Rope/safety Rope With/without Aluminium Sling, Box Type Fitting, Antenna Mounting Pipes, Shell Of Window Ac Of Various Sorts, Dust Bin, Hood, Grs Box, M.s Pipes Of Various Sizes, Card Rack, Bond, Hs Lamp, Battery Charger Core With Iron Stand Or Frame, Iron Core, Fl Patti & Fitting Of All Types And Sorts And Sizes, Fire Extinguisher Without Cap, Fire Bucket, Fan Down Rod, Ferrous Ac Template, Train Information Display System, Packing Strips, Battery Tray, Trough Floor Sheets, Radiator Bracket, Empty Charger Without Nfs Attachments (ferrous) And Any Other Ferrous Items Of Highly Corroded Nature Released From Carriage/wagon/loco Rolling Stocks, Galvanized Sheets Of Sorts & Sizes, Sand Pipe, Fl Fitting, Rolling Shutter And All The Above Items Are Of Various Sorts And Sizes In Full/cut/broken And With/without Wooden/glass/ Rubber/ Fs End Fittings With /without Minor Non Ferrous Attachments If Any In As Is Where Is Condition. Pl.no. 98090800. Custodian: Cdms-rsf-gsd-per. Location: A Row Bin 12. Note: (1) Cutting Permitted To Heavy Nature Items Only. (2) Loading By Crane Is Also Permitted. (3) If Any Non-ferrous Materials Found Should Be Handed Over To Custodian.