Paint Tenders

Details: Renovation with Inside & Outside painting , Roof treatment , plumbing and other allied civil works at Tehatta Divisional Store Building under Tehatta (D) division in the district of Nadia. (Estimate as per P.W.D. S.O.R. of Nadia District Excluding the area of Kalyani Sub-Division w.e.f. 01.11.17 and all other corrigenda uptodate.)

Details: Description:- Alteration Of Wiring In Existing Apparatus Cases Full/half. This Includes Supply Of All materials In Connection With Alteration In Wiring. All The Materials Shall Be Supplied By The Contractor at His Own Cost. This Includes Entry Of Cables, Sand Filling And Masonry Work Involved. Lettering And painting To Be Done By The Contractor At His Own Cost. Railway Shall Supply Only Relays And Relay bases.

Details: Construction of Temporary Hogla Structures for Press and Others, Temporary Special Latrine and Errection of 05 nos. Tent with Khalpa Mat and straw spreading at Different Places of Ganga Sagar Mela Ground including Maintenance of Latrine & Painting M.S. Fire Fighting Tanks (D.M. Complex) in connection with G.S. Mela 2025 under Kakdwip Sub-Division of Alipore Division, PHE Dte.

Details: - A/Mtc. of HSVP Staff Quarters in Sector-1, Rohtak. “White wash, distempering, painting, providing fixing of chowkats, flush door shutters & wire guage door, wall tiles etc & Fiber Shed. in Qtr. No. A-20, Colony No.2 and all other works contingent thereto”. A/C Rs. 1.79Lcs E/M Rs.3580/- Time Limit – One Month

Details: Erection, commissioning & testing of 04 (Four) sets of Spillway Radial Gates of size (15.000 mtr. x 12.078 mtr.), 04 (Four) sets 130T capacity hoisting arrangements for radial gates along with painting & 2nd. stage concreting of Radial Gates, Hoisting arrangements of Kanupur Irrigation Project, Basudevpur, Keonjhar as per drawings, scope of work and instruction of engineer-in-charge

Details: Residual Design & Engineering, procurement of materials, fabrication, erection, inspection, testing, calibration, painting, insulation, design & supply of jet mixers, heating coil, earthing system, supply of following Fixed Cone Roof storage Tanks including all accessories and all associated works such as Stone column, Civil foundations including dyke wall, Piping, Electrical, Instrumentation, Pre-commissioning and commissioning assistance etc

Description: CATEGORY: DE Spanner 21X23 , DE Spanner 8 X 9 Metric , Files flat bastard 150 mm , Files flat bastard 250 mm , Files taper SAW regular second cut 100mm , Grease Gun , Hammer Engineers Ball Pein 500 G , Plier Flat Nos 150MM , Pliers side cutting 200 mm insulated , Reamers hand adjustable 1 9 by 32 to 1 15 by 3 , Reamers hand adjustable 17 by 32 to 19 by 32 I , Reamers hand adjustable 27 by 32 to 31 by 32 I , Reamers hand adjustable 3 by 8 to 13 by 32 INC , Ring Spanner 16x17 Metric , Ring spanner 24x27 Metric , Rubber Hose , Screw Driver Electrician 50mm , Screw Driver 150mm , Screw Driver , Screw Driver 12 , Screw Driver Phillips Head 4x200 , Spanner Adjustable 300mm , Spanner Adjustable Single Ended Open JA , Spanner Adjustable Single Ended Open JAW , Spanner Box , Spanner DEAC 19X22 , Spanner double end ED 17x19mm , Rins Spanner 12x13 mm , Spanner open 12x13 , Spanner open 18x19mm , DE Spanner 21x23 , Spanner socket bihexagon metric 1 by 2 IN S , Spanner Socket bihexagon metric 1 by 2 IN S , Spanner adjustable 280MM , SPNR AM and UF A F SZ AM IN 19 by 32 X 11 by16 , SPNR OJDE MTRC A F SZ 24MMX26MM , Spanner Adj S E Open JAW Steel 200MM , SPNR ring cracked D E STL PLTD MM 13X17 , SPNR ring cracked D E STL PLTD MM 19X22 , Tyre lever , Washers spring single coil type B STEE , Wrench Key Hexal ACR Flat 3 by 32 , Wren Key hexal ACR flat SZ 7 by 64 , Pad lock IG 4 lever 40mm , ROD Welding Hard Facing 3.15MM , B Paint and Varnish Flat 500MM , Bag Leather Canvas

Description: CATEGORY: SITC of 25 NB, SS-304, Sch.-40-Seamless pipes. , SITC of 50 NB, SS-304, Sch.-40-Seamless pipes. , SITC of 100 NB, SS- 304, Sch.-10 -ERW pipes. , SITC of 50 NB SS-Wafer type butterfly valves. , SITC of 100 NB SS-Wafer type butterfly valves. , SITC of 25 NB, SS-304, 150 Class, Flanged end Ball Valves. , SITC of 40 NB, SS-304, 150 Class, Flanged end Ball Valves. , SITC of 15 NB, SS-304, 150 or 300 Class, Screw end Ball Valves. , SITC of 20 NB, SS-304, 150 or 300 Class, Screw end Ball Valves. , SITC of 100 NB, SS-304, 150 Class, Flanged end Y-Strainer. , SITC of 25 NB, SS-304, 150 Class, Flanged end PRV. , SITC of 25 NB, SS-304, 150 Class, Flanged end PSV. , SITC of Pressure Gauge, 0-10 Kg per cm2. Other details as specified in the tender. , SITC of Temperature sensor cum Transmitter, 0- 100 degree-C. Other details as specified in the tender. , SITC of 15 NB Flange ended Vortex type Flow meter. , SITC of 40 NB Flange ended turbine type Flow meter. , SITC of 50 NB Flange ended turbine type Flow meter. , DSITC of Junction Box cum display panel with 12 Pieces Signal Isolator with 10W and 2S , SITC of Instrumentation cable of 2Cx1.5 mm2. , SITC of 100 mm wide GI perforated cable tray. , MS Structure Work with painting. , Minor Civil Work and Other Fabrication and installation work.

Description: Description: Condemned Wagons, 1) Cr 30018827085 Bcnm1. 2) Er 30028891175 Bcnm1. 3) Ner 30048862186 Bcnm1. 4) Ner 30048860519 Bcnm1. 5) Sr 30068860933 Bcnm1. 6) Se 30078761183 Bcnm1. 7) Ner 30048855256 Bcnm1. 8) Er 30028801020 Bcnm1. 9) Ner 30048861547 Bcnm1. 10) Cr 30018861676 Bcnm1. 11) Ner 30048860601 Bcnm1. * Wagon With Ms Body (11 Nos.) Approx Auction Able Weight 148.80 Mt R/ Items For Boxn 1) Ctrb Wheel Set Complete With Bearings 2) Casnub Trolley With Bk.beam, 3)coupler Body, 4)knuckle, 5) Door, 6) Draft Gear , 7) Yoke Pin 8) Centre Pivot Pin , 9) Yoke, 10) Dv, 11) Sab, 12) Bk. Cylinder, 13) Centre Pivot Top Base. Note (1) The Wagon Will Be Delivered On An "as Is Where Is Basis Except R/ Items (2) Approach The Road Available Up To The Cutting Location. Remarks:- (1) Lot No, Buo No & G27 F Are Painted -yes (2) Auctional Weight Has Been Calculated On An Approximate Basis ( 3) Buo Number As Per G27 F Submitted By Sse (c&w), Dd-yes (4) Lot Ok For Sale-yes. (5) Any Addition Deletion Or Variation In The Lot Is The Sole Responsibility Of The Sse. During Cutting Of Maternal, Precautions Is To Be Taken By The Representative Of The Purchaser Itself To Avoid Any Incident And If Any Accident Happens Then The Representative Of The Purchaser Will Be Fully Responsible For It. The Risk And Cost Will Be Beared By The Representative Of The Purchaser.

Description: Scrap And Unserviceable Condemned Bajaj Made Gc Max Three Wheeler Auto With M&p No 48, Mh -12-gt-7744, And Chassis No Md2alalzzuwg03396, With Or Without Battery And Tyres Total Lot Qty: 01 No. *remarks: 1. Approach Road Available 2. There Is Scrap And Unserviceable Condemned Bajaj Make Gc Max Three Wheeler Auto With M&p No 48, Mh -12-gt- 7744 And Chassis No Md2alalzzuwg03396 With Or Without Battery, Tyres. 3. The Stockholder Is Responsible For The Assessment & Valuation Of Material On A Basis Subject To Any Variation During The Delivery By Actual Payment. 4. The Weight Has Been Assessed On Approximate Basis Subject To Any Variation During Delivery By Actual Unit Basis If Any. 5. No/similar And Other Type Of Material Is Lying Near The Lot. Sse/c&w/frt/mrj Has Assured To Remove The Extra Material Laying Near The Lot Or Side Assets. 6. The Quantity Physically Available. The Lot No & Measurement Has Been/bring Painted By The Stock Holder 7. The Lots Are Ok/net Ok For Auction Sale. 8. The Stock Holder Is Responsible For Any Alteration, Addition, Deletion & Variation In The Lot After Joint Inspection, If Any Found Subsequently 9. The Items Marked As Nfs (not For Sale) Will Not Be Delivered To The Purchaser Certified That No Unverified Material Is Lying Bear The Lot 10. Rc Book Available. 11. The Gas Cutting May Be Allowed For Easy Loading In The Truck 12. The Delivery Of The Lot Will Be On A Number Count Basis Only. 13. Bidders/purchasers Are Requested To Inspect & Clarify The Lot Material Personally Before Bidding. Location: Sse/c&w/frt Mrj Office Opposite To Bpcl Miraj - 416410