Paint Tenders

Details: Maintenance of conference hall (size 23.75 x 8.10 mtr), dining hall, verandah by replacement of existing damaged G.C.I sheet roofing (by new) hard board ceiling in verandah, including vitrified floor tiles , PVC ceiling in Dining Hall and partition wall, painting etc. at Dhajanagar Police line under Gomati District, Udaipur.

Description: CATEGORY: Suspension check and wheel alignment of complete vehicle , Wheel greasing and bearing replacement of all the four wheels , Repair to brake system of front and rear side and replacement of brake cylinder of rear side. , Replacement of water pump assembly complete , Silencer repairing and making good by burning and removing dust complete , Replacement of front foot mating and brake pad rubber , Replacement of fused indicator , Checking of electrical wiring, replacement of damaged wires and spark plug leads, checking of spark plugs and tuning of vehicle complete , Replacement of wiper set complete , Replacement of glass lock both rear sides , Replacement of carbonator set complete , Clutch Plate , Pressure plate , Repairs of self starter assy complete set , Oil Filter -01 Nos , Air filter -01 No , Replacement of Radiator pipes-02 No , Replacement of silencer gasket -02No , Petrol Pipe Assy Tail - 02 No , Radiator cleaning -01 Nos , Computer scanning and necessary adjustment of engine and transmission system , Shock absorber rear van , Shock absorber element , Steering coupling bush , Sliding door arm lower , Head light assembly , Centre sliding hinge assembly , Air intake sensor , Walker fuel pump , Front coil spring , Dickey lifter right , Lock kit , Carstar tail pipe , Wiper Arm , Paid Servicing labour charge for fixing of all above items complete. , Denting and Painting of Vehicle part or full body in work shop including replacement of rusted M S sheet by using gas welding complete.

Description: CATEGORY: Oil filter assy , Fuel filter assy , Air Filter assy , Clutch plate , Pressure plate , Exhaust Mounting rubber , Hose Pipe radiator , Fan Belt , Servicing and repair of self starter assy complete , Repair to rear and left side door including gas welding and replacement of hinges and door stopper , Indicator lenses of complete vehicle , Head light assy , Fog Light assy , Switch for Fog light , Bulb 1141 , Halogen bulb , Wheel alignment vehicle including adding weight to wheels , Timing bearing , Cam oil seal , Oil pump set complete , Oil pump packing , Temperature Meter , Switch assy combination , Switch assy steering Motor , Guide timing belt , Timing belt , Tie rod assy , Spark plug , Temperature Sensor 3 pin , Door outer handle , Front shock absorber RH and LH , Window regulator assembly LH , Wiper motor assembly , Drag link assembly , Drum line assy , Brake disc rotar , Self solenoid switch , Combination switch assembly , Knuckle kit , King pin sleeves , Front wheel oil seal , Inner oil seal of all the four wheels , Master cylinder , Hose pipe , Steering oil seal , Stabilizer bush , Shocker Bush , Brake Pad , King pin Knuckle Assy , Chess steering Selector Assy , Rear Silencer assembly , Paid Servicing labour charge for fixing of all above items complete. , Denting and Painting of Vehicle part or full body in work shop including replacement of rusted M S sheet by using gas welding complete

Description: CATEGORY: Exhaust Mounting rubber , Hose Pipe radiator , Repair to rear and left side door including gas welding and replacement of hinges and door stopper , Indicator lenses of complete vehicle , Head light assy , Fog Light assy , Steering oil seal , Stabilizer bush , Shocker Bush , Brake Pad , Chess steering Selector Assy , Rear Silencer assembly , Switch for Fog light , Bulb 1141 , Halogen bulb , Oil filter assy , Fuel filter assy , wheel alignment vehicle including adding weight to wheels , Timing bearing , Cam oil seal , Oil pump packing , Temperature Meter , Air Filter assy , Clutch plate , Pressure plate , Switch assy combination , Switch assy steering Motor , Wiper motor assembly , Drag link assembly , Brake disc rotor , Self solenoid switch , Combination switch assembly , Guide timing belt , Timing belt , Tie rod assy , Spark plug , Knuckle kit , King pin sleeves , Front wheel oil seal , Inner oil seat of all the four wheels , Temperature Sensor 3 pin , Fan Belt , Servicing and repair of self starter assy complete , Door outer handle , Front shock absorber RH and LH , Window regulator assembly LH , Hose pipe , Oil pump set complete , Drum line assy , Seat Cover Repair and stitching , Paid Servicing labour charge for fixing of all above items complete. , Denting and Painting of Vehicle part or full body in work shop including replacement of rusted M S sheet by using gas welding complete.

Description: CATEGORY: Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 1 Scope of work for Wall mounted exhaust fans up to 5 point 5 kW Removal of power and earthing cable termination removal of motor and fan M.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 2 Scope of work for Roof Exhausters up to 3 point 7 kW Removal of power cable termination and retermination decoupling of motor Motor healt.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 3 Scope of work for Roof Exhausters greater than 3 point 7 kW and up to 7 point 5 kW Removal of power cable termination and retermination .. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 4 Supply and Replacement of terminal boxes and terminal blocks including cable retermination using suitable lugs Supply of terminal box ter.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 5 Removal of existing painting cleaning supply and coating of Primer 1 coat of inorganic zinc silicate of thk 75 micron Corrosive resistan.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 6 Providing and fixing double Tubular scaffolding system using HFrames APS system or cup lock type on the exterior interior side upto r..

Details: Description:- Alteration Of Wiring In Existing Apparatus Cases Full/half. This Includes Supply Of All materials In Connection With Alteration In Wiring. All The Materials Shall Be Supplied By The Contractor at His Own Cost. This Includes Entry Of Cables, Sand Filling And Masonry Work Involved. Lettering And painting To Be Done By The Contractor At His Own Cost. Railway Shall Supply Only Relays And Relay bases.

Details: Renovation with Inside & Outside painting , Roof treatment , plumbing and other allied civil works at Tehatta Divisional Store Building under Tehatta (D) division in the district of Nadia. (Estimate as per P.W.D. S.O.R. of Nadia District Excluding the area of Kalyani Sub-Division w.e.f. 01.11.17 and all other corrigenda uptodate.)

Description: CATEGORY: DE Spanner 21X23 , DE Spanner 8 X 9 Metric , Files flat bastard 150 mm , Files flat bastard 250 mm , Files taper SAW regular second cut 100mm , Grease Gun , Hammer Engineers Ball Pein 500 G , Plier Flat Nos 150MM , Pliers side cutting 200 mm insulated , Reamers hand adjustable 1 9 by 32 to 1 15 by 3 , Reamers hand adjustable 17 by 32 to 19 by 32 I , Reamers hand adjustable 27 by 32 to 31 by 32 I , Reamers hand adjustable 3 by 8 to 13 by 32 INC , Ring Spanner 16x17 Metric , Ring spanner 24x27 Metric , Rubber Hose , Screw Driver Electrician 50mm , Screw Driver 150mm , Screw Driver , Screw Driver 12 , Screw Driver Phillips Head 4x200 , Spanner Adjustable 300mm , Spanner Adjustable Single Ended Open JA , Spanner Adjustable Single Ended Open JAW , Spanner Box , Spanner DEAC 19X22 , Spanner double end ED 17x19mm , Rins Spanner 12x13 mm , Spanner open 12x13 , Spanner open 18x19mm , DE Spanner 21x23 , Spanner socket bihexagon metric 1 by 2 IN S , Spanner Socket bihexagon metric 1 by 2 IN S , Spanner adjustable 280MM , SPNR AM and UF A F SZ AM IN 19 by 32 X 11 by16 , SPNR OJDE MTRC A F SZ 24MMX26MM , Spanner Adj S E Open JAW Steel 200MM , SPNR ring cracked D E STL PLTD MM 13X17 , SPNR ring cracked D E STL PLTD MM 19X22 , Tyre lever , Washers spring single coil type B STEE , Wrench Key Hexal ACR Flat 3 by 32 , Wren Key hexal ACR flat SZ 7 by 64 , Pad lock IG 4 lever 40mm , ROD Welding Hard Facing 3.15MM , B Paint and Varnish Flat 500MM , Bag Leather Canvas

Details: Supplying, Fabrication, Erection on suitable RCC foundation and Commissioning including 3 (three) months Trial Run and 5 (five) years O M (including cost of routine testing of water sample for performance evaluation) of Pressure Type Iron Removal Plant (Cumulative Capacity of 360 cum /hr)as per design norms of the P.H.E. Dte. with necessary accessories viz. MS fabricated shell with minimum 10 mm thick MS plate with 2 (two) coats of anticorrosive paint minimum 12 mm thick MS media supporting plate fitted with required no. of pot strainer, MS fabricated oxidation chamber with minimum 10 mm thick plate with necessary pipe connection, valves, Gauges & other instruments as required including preparation of detailed design & drawings duly vetted from IIT/NIT/JU/IIEST and the same is approved from the Deptt. including cost of filter media, Air Compressor & Air blower with motor, starter, main switch etc. of required capacity & approved specification including power connection from main line etc. all complete and construction of Blower Room, concrete platform & drain...etc. with common manifold connection for the water supply scheme within Islampur Municipality (Zone -1,3 and 5) under AMRUT 2.0 on turnkey basis.

Details: Erection, commissioning & testing of 04 (Four) sets of Spillway Radial Gates of size (15.000 mtr. x 12.078 mtr.), 04 (Four) sets 130T capacity hoisting arrangements for radial gates along with painting & 2nd. stage concreting of Radial Gates, Hoisting arrangements of Kanupur Irrigation Project, Basudevpur, Keonjhar as per drawings, scope of work and instruction of engineer-in-charge