Paint Tenders

Description: Providing Painting Services Of Old Cdsp Ms Structure At Dcu By Using Rope Access Method At Bpcl, Bina Refinery

Description: Painting Of Old Ohr At Madarihat Tg Pwss,(350 Cum) Under Alipurduar Division ,phe Dte.

Description: Paint Enamel Synthetic Brushing Finishing Exterior Black (packing In 20 Ltrs New Non Returnable M.s. Drum) "this Is Shelf Life Items And Should Be Procured With Staggered Delivery Period . Supplier To Mention/print Date Of Manufacturing On The Item & Item To Be Supplied Within 60 Days Of Manufacture Date." As Per Specn. Is: 8662/2004 With Additional Requirement Stipulated In Icf Specification No. Icf/m/d/spec 045 Issue Status 02 Revision 03 Except Clause C3 Of Is: 8662/2004 The Date Of Supply Of The Material Should B

Description: Marking And Painting On Runway Repair To Certain Board Repair Of Elastomeric Concrete Patch Repair At Ptt Area Tar Epoxy Under Ge Af Srinagar

Description: BOQ ITEMS: Line tester, 7 Drawer tools trolley , Combination wrench Set (mm), Combination wrench Set (inches), 1/2 inches drive deep socket Set , Torque wrench , Centre punch, Hammer 250 gram , Hammer 500gram , Hammer 1kg , Hammer 5kg , Soft face Hammer, Straight snips, File Set, Desoldering, Digital meter, Multi meter , Grease gun 3kg , Grease gun 10kg, Wise 8 inches, Wise 12 inches, Hand Grinder 4 inches, Rubber Hammer, 1/2 inches socket Set 7 to 32 HD (mm) , 1/2 inches socket Set 7 to 32 HD (Inches), Wd 40 (500ml), Rubber hand gloves, Safety shoes, 100-meter measuring tape, 3-meter measuring tape , Measuring wheel, Rivet gun (Heavy Duty) , Adjustable wrench 8 inches, Chain wrench 2 inches, Chain wrench 4 inches, Chain wrench 6 inches, Ball pin Hammer 100gram, Ball pin Hammer 250 gram, Hydraulic jack 6 ton, Hydraulic jack 2 ton , Piston ring compressor Rc-3, Piston ring compressor Rc-4, Piston ring compressor Rc-5, Ring expander, 1/4 inches socket wrench, Bit socket Set , 1/2 inches screwdriver Set, Matric Safety Comb wrench Set, T Handle Wrench 12 inches, Wrench kit , Key wrench ball point Set, Key wrench star point Set , Flat Chisel 6 inches plus 8 inches Set , Screw driver 12inches, Screw driver 6 inches, Screw driver 18inches, Wire cup brush 3 inches, Drill bit Set 1-13mm, Drill machine , Welding rod, 3/4inches T HANDLE extension 4 inches, 3/4 inches drive 34 socket, 3/4inches drive 36 socket , 3/4 inchesdrive 38 socket , 3/4inches drive 42 socket , 3/4inches drive 48 socket , 1/2 inches drive handle T L type, 1/2inches extension 5inches , 1/2 inches extension 8inches, 1/2 inches extension 12inches, RPM Tester , Grinding goggles, Face shield, Face shield glass, Pipe wrench 8 inches, Pipe wrench 12 inches, Pipe wrench 18 inches, Pipe wrench 24 inches, Adjustable wrench 12 inches, Adjustable wrench 18 inches, Bearing puller 2 jow 12 inches, Bearing puller 2 jow 6 inches, Bearing puller 3 jow 12 inches, Bearing puller 3 jow 6 inches, Bearing puller 3 jow 16 inches, AIR HOSE REEL, Washing tray, Tachometer, Oil extractor, Welding machine 300 amp, Battery charger, Nozzle tester, Alternator testing, Compressor portable, Painting gun, Table grinder, Tyre pressure gauge, Extension bit, Diesel engine compressor kit, Petrol engine compressor kit, Impact wrench , Flank socket Set, Tab kit inner outer, Circuit Tester, soldering iron Set 120 watt, Automatic circuit voltage tester, Vehicle battery tester, Hydrometer, New Fire Extinguisher, CO2 Gas type 4.5 KG Capacity, New Fire Extinguisher, ABC Powder type 6 KG Capacity, New Fire Extinguisher, Mech. Foam type 9 LTR Capacity

Description: : Condemned Handloom Cotton Bed Sheet. Total Lot Qty: 13.2 Mts Approx 1. Approach Road Is Available. 2delivery Will Be Done On An Actual Weight Basis And Weighment Will Be Done On Govt Approved Weighing Bridge. 3. Shifting /loading Etc Will Be Done By Purchaser By Their Arrangement.. 4. The Quantity Physically Available. 5. Similar And Other Type Of Material Is Not Lying Near By The Lot Or Side Assets. 6. The Lot No. Has Been Painted. 7. Lot Is Ok For Sale. 8. The Stock Holder Is Responsible For Any Addition , Deletion & Variation In The Lot After Joint Inspection, If Any Found Subsequently. 9. Purchasers /bidders Are Advised To Inspect The Lot Material, Location , Also Tally State ,hsn Code ,gst Percentage Before Bidding. Location: Divisional Store Depot/gpr/pune

Description: Condemned Cbc Components Including Cbc, Yoke & Stricker Casting, Total Lot Qty:15 Mts. Remarks: 1. Lot Is Approachable 2. Delivery Will Be On Actual Weighment Basis On Nearest Govt. Approved Weighing Machine. 3.similar Type If Material Is Laying Near The Lot Is Verified And Accounted For By Stock Holder 4. The Quantity Is Physically Available. 5. The Lot No. Has Been Painted On Lot 6. Certified That The Above Scrap Material Is Not Useful For Railway Use. 7. The Lot Is Ok For Sale. Sanction Of Competent Authority Has Been Obtained On Ss11 8. After The Joint Lot Inspection, If Any Addition, Deletion, Alteration And Variation Come In Lot, Stock Holder Will Be Fully Responsible. 9. Certified That No Unverified Material Is Laying Near The Lot. 10. Stock Holder Is Responsible For The Assessment Of The Quantity In The Lot. 11. Similar And Other Type Of Material Are Laying Nearby Lot Will Not Be Delivered. 12.it Is Strictly Advice To Bidder To See The Lot Personally Before The Bidding For The Lot And Its Approach. 13- Nps-items Will Not Be Delivered To The Purchaser. 14. Any Weight Difference Between Actual Weight And On Ds-8&s-11 Will Be The Responsibility Of The Stockholder . Location: Scrap Yard C&w Dept, Daund

Description: CATEGORY: Professional Painting Service - Metals; NA; Pipelines, Pipe headers and spools

Description: Scrap Copper Consisting Of Released Mix Copper Items, Copper Radiator ,cutting Nozzle,strips Plates,cuttings And Pieces,copper With Insulation,busbar Flat,pdr Unit Plates,pdr Diode,pipeline,pipes And Tubes Both Big And Small Winding Wire,burnt Wire,h.t. And L.t.line And Busbar,earthing Shunt,current Collector Shunt,horn Diphragm,gauge Tube,s.i.isolator,cgr Contact Coil,seamless Copper Pipe,copper Tubing ,gr Tips Inner And Outer,contact Ring Innner And Outer,cgr Link Plate,lever Lead Connection Nut,bolt And Stud,conical Nut ,contact Roller ,contact Nut And Bolt,cgr Coil,phgr Air Pipe M X 20 Stud,ccr Connection Interlock Plate And Other Copper Items.copper 96.65 Percent,iron, Ceramic,grease,carbon, Insulation,paint,plastic And Dust 3.35 Percent(qty.on Approx Basis.) Note Deliver Will Be Given On 1000 Kgs.electronic Weighing Machine Of Non-ferrous Godown.

Description: Scrap Elastromeric Pad Consisting Of Two Metal Plates And Elestomer Sandwitch In Between. Ferrous Qty.-80%, Elestomer Qty.- 20% Approx. Per Unit , Total Lot Qty: 18 Mts Remarks: 1. Lot Is Approachable 2. Delivery Will Be On Actual Weighment Basis On Nearest Govt. Approved Weighing Machine. 3.similar Type If Material Is Laying Near The Lot Is Verified And Accounted For By Stock Holder 4. The Quantity Is Physically Available. 5. The Lot No. Has Been Painted On Lot 6. Certified That The Above Scrap Material Is Not Useful For Railway Use. 7. The Lot Is Ok For Sale. Sanction Of Competent Authority Has Been Obtained On Ss11 8. After The Joint Lot Inspection, If Any Addition, Deletion, Alteration And Variation Come In Lot, Stock Holder Will Be Fully Responsible. 9. Certified That No Unverified Material Is Laying Near The Lot. 10. Stock Holder Is Responsible For The Assessment Of The Quantity In The Lot. 11. Similar And Other Type Of Material Are Laying Nearby Lot Will Not Be Delivered. 12.it Is Strictly Advice To Bidder To See The Lot Personally Before The Bidding For The Lot And Its Approach. 13- Nps-items Will Not Be Delivered To The Purchaser. 14. Any Weight Difference Between Actual Weight And On Ds-8&s-11 Will Be The Responsibility Of The Stockholder . Location: Roh Shed Daund Premises