Angul Tenders

CATEGORY: 88603010510 , 88606208440 , 88606205630 , 88601089460 , 88651205010 , 88604017530 , 88614003310 , 88601052590 , 88606212090 , 88606217040 , 88606218090 , 88606232360 , 88612033360 , 88616002010 , 88611051040 , 88622219440 , 88623126480 , 88623136410 , 88622322810

H2 Purity Gas Analyser

CATEGORY: Custom Bid for Services - Comprehensive AMC for Vessel Sealing Device FT10 of Nalco Hospital OMC 5883

Rolls Of Paper For Coolant Plant

CATEGORY: Double faced sledge Hammer, 3.6 Kg, as per attached TPS , Double faced sledge Hammer, 5.4 Kg, as per attached TPS , Ball Pein Head Hammer, 0.45Kg, as per attached TPS , Wrench Set, Ring Type, Size 6 to 32mm, as per attached TPS , Wrench, Ring Type, Size 24 x 26 mm, as per attached TPS , Wrench Set, Double open end type , Size 6 to 32mm, as per attached TPS , Wrench, Double open end type , Size 24 x 26 mm, as per attached TPS , Wrench, Adjustable type , Length 300mm, as per attached TPS , Wrench, Pipe type , Length 450mm, as per attached TPS , Wrench, Pipe type , Length 600mm, as per attached TPS , Socket, wrench set, Size Range 10 to 33 mm, as per attached TPS , Wrench set, Allen type, Size 2 to 10 mm, as per attached TPS , Wrench, Allen type, Size 14 mm, as per attached TPS , Wrench, Allen type, Size 19 mm, as per attached TPS , Hand Hacksaw Frame, as per attached TPS , Saw Blade, as per attached TPS , Plier, Combination type, as per attached TPS , Plier, Side Cutting type, as per attached TPS , Plier, Insulated long nose type, as per attached TPS , Screw driver 250mm, as per attached TPS , Screw driver 250mm with insulated Handle, as per attached TPS , Screw driver Sets, as per attached TPS , Automatic Centre Punch 6 inch, as per attached TPS , Chisel, Flat type, as per attached TPS , Bolt Cutter, Size 450mm 18 inch, as per attached TPS , Utility Knife, as per attached TPS , Crimper, as per attached TPS , Thermometer, as per attached TPS , Tester, as per attached TPS , Wrench, Adjustable type , Length 450mm, as per attached TPS

Cat 6 Patch Cord,cat 6 Patch Cord,cat 6 Patch Cord,cat 6 Patch Cord,mouse Pad,hdmi Cable,hdmi Cable

CATEGORY: Custom Bid for Services - Overhauling of 11KV Transformers in Smelter Plant NALCO

Roll Shell

Silicone Elastomer Rtv-678 Of Anabond Pvt. Ltd.or Rtv-1080 Of M/s. Dow Corning or Similar With Parameters Room Temperature Vulcanizing Oxime Silicon Single component, Non-slumping, Low Odour, Low Volatile Sealant In 310 Gms Catridge To specification: (i) Specific Gravity:1.0-1.10 (ii) Tensile Strength In Kg/sq.cm : 15- 25 (iii) Dielectric Strength : Greater Than 18 (iv) Service Temperture: 50 To 250 degree C. (v) Colour: White. (vi) Skin Forming Time Surface Cure: 15-25 Minutes. (tenderer Should Furnish Dealership Certificate Of The Oem Along With Their quotation).

CATEGORY: 31760003090 10-66606 , 31760003120 , 31760000110 , 31760000630 , 31760003080