Tenders of Bharat Heavy Electricals Limited in Madhya Pradesh

CATEGORY: ITEM NO. 01: SEPERATOR, DRG. 46211000120 R02 , ITEM NO. 02: SEPERATOR, DRG. 46211000121 R01 , ITEM NO. 03: SEPERATOR, DRG. 46211000146 R03 , ITEM NO. 04: SEPERATOR, DRG. 46211000147 R02

E4943090 - 33kv Indoor Resin Cast Pts

Fabrication And Supply Of Factory Finished Fabricated Structure Of Power House, Common Control Room, Mill Bunker Structure As Per Scope Of Work For 2x800 Mw Ntpc Singrauli Stage-iii

BOQ ITEMS: BOQ ITEM 1 GUIDE VANE SEAL RUBBER AS PER DRAWING NO. 32030115221 REV.00 AND TECHNICAL REQUIREMENT MENTIONED THEREIN., BOQ ITEM 3 PISTON GUIDE DIA 550 GUIDE STRIP KF OF NON METALLIC MATERIAL PTFE BRONZE SUITABLE FOR WORKING PRESSURE 100 KG per CM SQ. AND TEST PRESSURE 150 KG per SQ. CM . AS PER SIMRIT CATALOGUE ARTICLE NO. 24257339 TYPE-KF, OD 550, ID-545, H 24.5 OR EQUIVALENT SUITABLE FOR OIL APPLICATION, BOQ ITEM 6 CHEVRON PACKING (STAINLESS STEEL) SPRING LOADED, NON ADJUSTABLE, ENDLESS TYPE, SIZE ID-600 MM X OD-650 X LENGTH 79MM. (WORKING PRESSURE 71KG/CM2, TEST PRESSURE 106KG/CM2) EACH SET CONSISTING OF 5 RINGS INCLUDING 3 CHEVRON RINGS, ONE SPRING LOADED MOULDED HEADER AND ONE GLAND RING FOR SILTY RIVER WATER APPLICATION THE FABRIC REINFORCEMENT FOR THE CHEVRON PACKING SHOULD BE NYLON TO RESISIT WATER ABSORPTION AND DIMENSIONAL CHANGE, BOQ ITEM 9 U-PACKING SEAL (MATERIAL POLYURETHANE) FOR ROD DIA25MM, GROOVE OD-33MM, GROOVE WIDTH 6.3MM, AS PER SIMRIT CATALOGUE ARTICLE NO.-337346 (TYPE-NI300) OR EQUIVALENT. WORKING MEDIUM OIL, WORKING PRESSURE 100KG/CM2, BOQ ITEM 11 RUBBER SEAL (LENGTH 12500 MM) AS PER ENCLOSED DRAWING NO.32160115201 AND SPEC. AA59807 REV.04., BOQ ITEM 13 PISTON SEAL (OMEGAT OMK-MR) TWO-PIECE SEAL SET FOR SEALING PISTON AND CONSISTING OF ONE PTFE PROFILE RING AND ONE O-RING AS PER LOAD COMPONENT SUITABLE FOR WORKING PRESSURE 100KG/CM2 AND TEST PRESSURE 150KG/CM2, AS PER SIMRIT CATALOGUE ARTICLE NO. 24361027 TYPE OMK-MR OR EQUIVALENT (DIA 175MM, ID-159.5MM, H-5.9MM) REFERENCE DRAWING NO. 32120615202 REV. 00 AND DRG. NO.32120615203, BOQ ITEM 15 CUP SEAL O/D 60 X I/D 40 X10 AS PER PRODUCT STD. & PURCHASE SPEC. HT00201 REV.02 VAR. NO. 30 & HT00203 REV. 03. VENDOR TO FURNISH COMPOSITION AND HARDNESS OF MATERIAL IN ANNEXURE-A., BOQ ITEM 16 CUP SEAL OD 90X ID 70X10 AS PER PRODUCT STD. & PURCHASE SPEC. HT00201 REV.02 VAR. NO. 39 & HT00203 REV. 03. VENDOR TO FURNISH COMPOSITION AND HARDNESS OF MATERIAL IN ANNEXURE-A., BOQ ITEM 21 PISTON SEAL DIA 140 (OMEGAT OMK MR),TWO PIECE SEAL SET FOR SEALING PISTON & CONSISTING OF ONE PTFE BRONZE PROFILE RING AND ONE O RING (NITRILE RUBBER NBR) AS PRELOAD COMPONENT SUITABLE FOR WORKING PRESSURE 100 KG/CM2, TEST PRESSURE 150KG/CM2 AS PER SIMRIT CATALOGUE ARTICLE NO. 24178479, TYPE OMK MR, OD 140, ID 119, H 7.7, TO YOUR MODEL PROFILE PS008N, COMPOSITION ONE PTFE BRONZE PROFILE RING & ONE O RING (NITRILE RUBBER NBR), HARDNESS PTFE RING 68 SHORE D & O RING 70 SHORE A, BOQ ITEM 22 PISTON GUIDE DIA 140 (GUIDE STRIP KF) OF NON METALLIC (MATERIAL PTFE BRONZE) SUITABLE FOR WORKING PRESSURE 100 KG/CM2, TEST PRESSURE 150 KG/CM2 AS PER SIMRIT CATALOGUE ARTICLE NO. 24102436, TYPE KF, OD 140, ID 135, H9.6. TO YOUR MODEL PROFILE WRPBRG, COMPOSITION PTFE BRONZE COMPOUND, HARDNESS 68 SHORE D., BOQ ITEM 28 PISTON SEAL DIA.150 (OMEGAT OMK-MR), TWO PIECE SEAL SET FOR SEALING PISTON & CONSISTING OF ONE PTFE BRONZE PROFILE RING AND ONE O-RING (NITRILE RUBBER NBR) AS PRELOAD COMPONENT SUITABLE FOR WORKING PRESSURE 100 KG/CM2, TEST PRESSURE 150KG/CM2 AS PER SIMRIT CATALOGUE ARTICLE NO.-24178480, TYPE OMK-MR, OD-150, ID-129, H-7.7 OR EQUIVALENT.

CATEGORY: Budesonide Respirator Solution for use in Nebulizer (Q2)

CATEGORY: DUMMY PINION/SHAFT AS PER ATTACHED DRAWING 1577813 REV-07 ITEM# 1 FUL

Top Oil Vapour Seal Assembly-1,bottom Oil Vapour Seal Assembly-2

Ta4502az Set Of Shims (1 Set Equail To 2 Items) 1) Shims For Stator Frame To Drg. No. 34301092078v0

CATEGORY: EPOXY PACKING# 3, DRG. NO. -34998100044, REV. 01

Bp9609486029: Set Of Machined Items (pvn12) To Drg. 35217001670-v00