Locker Tenders

Description: Scrap Ferrous Cast Steel Consisting Of Various Types Of End Shields,bearing Caps,housing Bearing Casing, Bearing Sleeves, Bearing Locking Plates ,rings And Other Scrap Components Of Sorts And Sizes. Pl-98050060

Description: Mixed Scrap : Actual Lot No. 03122504 0738. Pl No.98050047 (15) (hsn Code 72044900-gst18% On Fcm Basis) Scrap Of Cond. & Unserviceable Mixed Scrap Of Ms, Cs, Ci, Gi, Ss Contains Pipes End Body Pcs. Horizontal Levers Hand Brake Wheels Angle And Channel Pcs, Rod Pcs Stands Valves Levers Bolts And Nuts Rivets Washers Pins Foot Steps Cut Bits Side Barer Housings Pipe Pcs Straps Liners Sheets Pipe Pcs Pins Throwers Locks Races Collars Axle Box Covers, Air Brake Pipes, Guard Seats, Ms End Body Pcs, Ms Sheets, Ms Cut Bits, Ms Rod Pcs, Sab Parts, Gi Wire, Ms Ladders, Ms Channels, Door Hangers, Tool Box, Ms Meshes, Bp Fp Hose Pipes, Knuckles, Crushed Paint Drums, Grease Seals, Yoke Support Plates, Yoke Pins, Sheet Strips, Ms Pipes And Pcs, Rubber Pads, Chairs, Roof Sheets, Grease Drum, Auxiliary Reservoirs, Cone Bearing, Hoop Iron. Wedges Hyd. Hoses Fabricating Scrap And Other Misc Items Of Wagons Sorts & Sizes Full Or Broken With Or Without Attachments Location: Road No.3&4 (single Cut Permitted For Loading Purpose Only) (note: 1. If Any Ss/ Corten Steel & Non-ferrous Items Found During Loading / Delivery Shall Be Return To The Railways By The Purchaser 2. In Case Of Clubbed Lots, Purchaser Has To Clear The Lots In The Sequence As Mentioned In The Lot Description And No Deviation Is Accepted. 3. No Picking And Choosing Of Material Is Permitted While Taking Delivery )

Description: CATEGORY: Wiper Blade , Fuel Feed Pump , Locking Plate , Rectifier Metallic , Eng Sensor Speed , Oil Seal Rotary Pump , Release Cable , Clutch Fork , Steering Oil Seal , Bush , Pinion , Fuel filter , Oil Seal , Carburetor , Hose , Speedo Meter Cable , Wheel cyl Assy , Brake Shoe Assy , Kick Oil Seal , Drive Assy , Door Inner Catch , Lever Assy , Air Filter , Fuel Filter , Oil Filter , Fan Belt , Crank Shaft Oil Seal

Description: M S Heavy Melting Actual Lot No. 03122504 0624. Pl No.98050047 (15) (hsn Code 72044900-gst18% On Fcm Basis) Ms Scrap Of Cond. & Unserviceable Heavy Melting Angle And Channel Pcs, Rod Pcs Stands Valves Levers Bolts And Nuts Rivets Washers Pins Dv Covers Bushes Brake Shoes Shackles Shackle Stones Strips J Bolts Hand Brake Wheels Latches Toothed Segments Foot Steps Hanger Brackets Bevel Gear Wheels Horizontal Levers Door Hinges Flanges Wedges Cut Bits, Ms Sheets Side Barer Housings Pipe Pcs. Straps Liners Sheets Pipe Pcs. Pins Throwers Locks Races Collars Axle Box Covers, Liners, And Other Misc Items Of Wagons S&t And Ttm Sorts & Sizes Full Or Broken With Or Without Attachments. Location: Road No.3 (image Attached) (note: 1. If Any Ss/ Corten Steel & Non-ferrous Items Found During Loading / Delivery Shall Be Return To The Railways By The Purchaser 2. In Case Of Clubbed Lots, Purchaser Has To Clear The Lots In The Sequence As Mentioned In The Lot Description And No Deviation Is Accepted. 3. No Picking And Choosing Of Material Is Permitted While Taking Delivery )

Description: Lot No. C&w/adtp/24-25/80, Desc.- Unserviceable & Scrap Released Sheets/plates Od Different Sizes And Thickness Misc. C&w Fittings Like Different Types Of Rods, Angles, Channels, Hand Brake Wheel, Broken Foot Steps, Door Rester, Cbc Lock, Broken Knuckle Pin, Broken Spring, Etc. And Other Small Fittings (like Rivet, Screw, Bolts, Nuts, And Washers) Which Are Not Being Maintained Saperately In Bin Card., Approx. Total Ferrous Weight-30 Mt.

Details: Multi Target Uhv Sputtering System System Should Consist Of Deposition Chamber And Load Lock Chamber With Ultra High Vacuum. Sputtering Chamber Should Be Provided With 6 Sputter Cathodes Of Dc. Load Lock Chamber With A Rf Sputtering Gun.

Description: Set Of Lock Assemblies For Wag9, Each Set Consists Of 02 Items Of 10 Nos 1. Inter Lock Assembly For Cab Side Door As Per Clw Drg.no.1209.01.133.021alt-2. 04 Nos/set. 2. Lock Assembly For Machine Room Door And Cab Door As Per Clw Drg. No.1209.01. 133.071 Alt.-1. 06 Nos/set. To Clw Specn. No. Clw/ms/3/111/alt-3 Or Latest If Any. Note: Clw Approved Sources Shall Only Participate In The Tender Or Supplier Offers Shall Be Considered With Valid Tender Specific Authorisation Certificate From Clw Source Shall Be Submitted Along With Their Offer.

Description: Door Lock Complete For Auxiliary Converter Etc.

Description: Released Condemned Various Type M.s Fixture Of Led Luminaries, Boxes, Switchgear, (tpic, Dpic,sfu, Starte R,pannel,m.s Channel, Angle, Valve, Sheets, Chaire, Lockers, Rack, Trolly, Platform Scale, M.s Haxogonal Weight.total Lot Qty: 5.519 Mts Approx)

Description: Lot No. C/elst/m6/03/40, Srl No. (1) Desc.- Set Of Dampers For Wag-9 , Qty- 06 Sets , Srl No. (2) Desc.- Secondary Spring For Wag-9 , Qty- 08 Nos. , Srl No. (3) Desc.- Push-pull Rod (traction Bar) , Qty- 08 Nos. , Srl No. (4) Desc.- Yaw Damper Of Wag-9 , Qty- 13 Nos. , Srl No. (5) Desc.- Vertical Damper Of Wag-9 , Qty- 17 Nos. , Srl No. (6) Desc.- Sec. Horizontal Damper , Qty- 09 Nos. , Srl No. (7) Desc.- Housing For Traction Bar , Qty- 04 Nos. , Srl No. (8) Desc.- Ht Transition Cb Coupler , Qty- 01 Nos. , Srl No. (9) Desc.- Coupler Body For Tr Cbc , Qty- 16 Nos. , Srl No. (10) Desc.- Long Life Loco Side Buffer , Qty- 20 Nos. , Srl No. (11) Desc.- High Capacity Draft Gear , Qty- 14 Nos. , Srl No. (12) Desc.- Modified Striker Casting , Qty- 04 Nos. , Srl No. (13) Desc.- Cattle Guard For Wag-9 , Qty- 04 Nos. , Srl No. (14) Desc.- Draft Gear Elastomer Pad , Qty- 08 Nos. , Srl No. (15) Desc.- H Type Tight Lock Cbc , Qty- 04 Nos , Srl No. (16) Desc.- Knuckle , Qty- 76 Nos , Srl No. (17) Desc.- Clevis , Qty- 47 Nos , Srl No. (18) Desc.- Modified Transition Screw Coupling , Qty- 36 Nos. , Srl No. (19) Desc.- Knuckle Pivot Pin For H.t.cbc , Qty- 123 Nos , Srl No. (20) Desc.- Clevis Pin For H.t.cbc , Qty- 85 Nos , Srl No. (21) Desc.- Miscellaneous , Qty- 04 Drums, Approx. Total Ferrous Weight-20941 Kgs.