Locker Tenders

Description: CATEGORY: T2SII Turn buckle body , T2SII Turn buckle rod - LH Thread , T2SII Turn buckle rod - RH Thread , T2SII Turn buckle lock nut - LH Thread , T2SII Turn buckle lock nut - RH Thread , T2SII Turn buckle M16x2 rod end bearings with lock nut - RH Thread , T2SII Turn buckle motor side bracket , T2SII Turn buckle nozzle side bracket

Description: "scrap Divisional Melting Consisting Of Scrap Mono Trolley, Trolley, Gi Pipe, Rods Angles, Ground Connection Rods, Bracket, , Diplory, Pad Locks,fawrah, Wear Plate, Air Compress Release , Nut Bolt, Compactor ,wire Claw, Showel , Pick Beaters , Sieve, Pans, Rail Gauges, Tommy Bars, Buckets , Wires, Pipes ,quarter Lb, Gate Operating Panel Rack, Base, Rail Dollies, Jim Crow And Various, Divisional Items Mini, Angle, Gi Piller, Box Misc. Etc With Or Without Miner Nonferrous Release From Works Deportment Note : Cutting Permission May Be Allowed For Easy Loading During Delivery S.b.lot No. Bpl/crws/25-26/ferr Ous/01/0015 Restricted Item-1.axle Box Spring And Bolster Spring .2. Screw Coupling. Brake Beam, Draw Hook, Buffer Plunger, Buffer Socket, Vacuum Reservoir. 3. Stainless Steel Items.4 Gi Pipe Above 3¿feet Length 5, All Type Of Bearing. Note-(a) Non Ferrous (except Minor Attachment) If Any Found In The Lot Will Not Be Delivered (b) Regarding Classification Of Items, Depot Officer Verdict Will Be Final For Any Dispute Note: Delivery Will Be Made On Actual Weighment Basis.

Description: 98050114 M.s. Melting Scrap Released Such As Draft Key, Bmbc Brake Cyclinder,more Taper Shank,twist Dril, Tapper Ring Set, Dorme Cover , Crane Chain And Hook , Draw Hook Beam, Draft Yoke, Anti-roll Bar Bracket, Rail Tong, Bearing For Anti-roll Bar, Bent Coupling Link, Hanger For Bogie Bolster, Screw Coupling, Draw Bar, Draw Hook, Anchor Link With Or Without Silent Block, Equalizing Stay Rod, Guard Rail Bolt For Bridge, Laminated Leaf Spring, Wire Rope With Or Without Aluminum Crimping, Traction Lever Housing, Traction Center Housing, Cylinder Body, Broken Spring, Z-bracket, Mix Release Of Material Engine, Lateral Bump Stop With Or Without Rubber Attachment, Primary Bump Stop With Or Without Rubber, Face Plate Of Buffer Plunger Of Sorts And Sizes With Or Without Rivets, Rubber Attached Sandwich Assembly For Emu, T-head Bolt For Channel, Air Spring Assembly Plates, Motor Coach Rear Cover, Motor Front Cover, Axle Box Front Covers, Spares Of Dismantled Bearings Such As Collar, Pieces Of M.s. Angles, Broken And Small Spring Pieces, Brake Pad With Or Without Rubber, Cotter Pins, Phonic Wheel, Jaw, Jack Sorts 12,18,25 Ton, Plates Of Various Sorts And Sizes, Grease Or Oil With Or Without Spares, Silent Block For Bolted Design With Or Without Rubber Or M.s. Attachment, Knuckle, Pointer Machines, Fish Plates, Joggle Plates, Air Spring Assembly 180 Kn With Or Without Rubber Attachment, Spanners, Tapes, Bracket, M.s. Scrap, Nut-bolts, Steel Pattis With Or Without M.s., Broken & Damaged Fitting Channel Sleeper Bridge, Knuckle Pins, Brake Cylinder Assembly Broken And Damaged, Cartridge For Bearings, Gear Small Pieces With Or Without Oil And Grease, All Parts Are Soiled And Greased, Heavy M.s. Plates And Brackets With Perforations, Spring-loaded Buffer Assemblies, Railway-specific Cast Iron And Steel Structural Components, Axle And Wheel-related Components, Dismantled Wheelset Parts, Rusty And Broken Tension Rods, Traction Links, Coupling Rods, Worn-out Threaded Components, Washers, Clamps, Support Brackets, Dismantled Steel Reinforcement Structures, Mechanical Linkages, Damaged Traction Gear Components, Corroded And Bent Track Fittings, Securing Bolts, Connecting Links, Guide Rods, Rail Clips, Fasteners, Mechanical Locking Assemblies, Dismantled Coupling Parts, And Miscellaneous Railway Hardware Inner Clip, Outer Clip,t Head Bolt , Guard Rail Bolt And Washer , Hook Bolt . All Material Is Unserviceable And Beyond Economical Repair (ber), Sold On An "as Is Where Is" Basis. Loading By Purchaser. Custodian: Dms/scrap/pardi.

Description: Whole Current Ac Single Phase Two Wire Dlms Compliant Static Energy Meter (10-60a) Of Accuracy Class 1.0 With Communication Facility With Self Locking Type Polycarbonate Meter Box

Description: Ms Scrap ¿ 35.000 Mts- Delivery On Actual Weightment Basis. Lot No 5312 25 01 77 Gtl Gy Ms Ap. Available With Sse C And W Gy. Scrap. Cond. And U/s. Released Ms Scrap Consisting Of 33 Items As Follows. 1) Hand Brake Wheel (side Operated) 2) Broken Sab¿s 3) Cross Bars 4) Broken Break Beam Support 5) Broken Break Gear Pins 6)m.s Anglers 7) Foot Step For Hand Brake Wheels. 8) Bolt & Nut 9) Pu Pad Top & Bottom Iron Cups10) Bcn Door Cotter Long & Short 11) Side Bearer Housing 12) Striker Casting Wear Plate 13) Door Way Stiffener 14) Load /empty Gear Box 15)end Pull Rod & Push Rod 16) Control Rod 17) Break Wear Plate Break Beam 18) Cut Off Angle Cock 19)door Hinge & Pins 20)main Pull Rod Long & Short 21)bolster Side Frame Friction Liner 22)liner For Bolster 23) Empty Tie Rod 24)brake Shoe Keys 25)broken Brake Cylinders 26 )broken Auxiliary Reservoirs 27)load Empty Bracket Long 28) Load Empty Bracket Short 29) Shaft Bearing With Sign Plate 30) Bearing Pieces 31)shank Wear Plate 32) Locking Plates 33) Other C& W Broken. Total Qty- 35.000 Mts. (approx). Available In Gooty Boxn Roh Depot Scrap Yard Behind Atc. Ds-8 No. 531200058 Dt.09.01.25, . Hsn Code: 720429/gst18%) Note To The Bidders 1) Successful Bidder Is Advised To Pay Bsv At The Earliest And Approach All The Concerned Witnessing Officials Immediately Along With Delivery Point Fixation Letter For Taking Loading To Avoid Last Minute Rush And Unforeseen Circumstances 2) Bidders May Visit The Site Of The Material For Physical Inspection Of The Material And Loading Spot Also, In All Aspects Before Bidding In E Auction.3) Post Auction No Representation Shall Be Entertained.4) For Photos Of This Lot, Kindly Click On View Lot Image On Bottom Left Side. 5) Gas/chisel Cutting Is Permitted, If Required, For Easy Loading And Transportation Purpose, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc To Avoid Any Mishap To Any Person, Railway Material Etc. Witnessing Officials To Ensure That The Lot Is Delivered As Per Lot Description. 6) In Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. 7) It Is The Responsibility Of The Purchaser/bidder To Return Excess Material, If Found During Gross Weighment, To The Nominated Premises Of The Custodian. 8) Clubbing Of The Lots, What So Ever, Is Not Permitted For Loading 9) Request For Fixation Of Delivery Point Should Be Invariably Raised In Ireps Online Only. Purchasers Are Requested To Make Use Of This Facility. No Representative Should Be Sent To The Office Of Sr.dmm/gtl For Collection Of Delivery Fixation Letter. As Soon As The Balance Sale Value Is Received By Railways Online, Delivery Order Will Be Issued Immediately, To Facilitate The Purchaser To Raise An Online Request For Fixation Of Delivery Point. 10 Railways Does Not Guarantee For Quality, Quantity Description Etc.

Description: 98050060 Scrap Ferrous Material Consisting Of Cast Steel Coupler Body, C.p. Top, C.p. Bottom, C.p. Bolt, Knuckle, Yoke Support Plate, Cast Steel Yoke And Cut Pcs Yoke Of Short And Sizes. Axle Box, Cbc Lock, Back Stopper, Kicker, Toggle Empty Body Of Draft Gear And Draft Gear Parts, Front Follower, Buffer Plunger, Buffer Socket, Axle Box Cap/cover Backing Ring (outer/inner), Axle Box With Or Without Bearing Stricker Casting And Other Small Cast Steel Items If Any. Note:-1. Wide Jaw And Narrow Jaw Adopter, Empad And Complete Draft Gear Not To Be Delivered. 2. Private Crane Allowed For Easy Loading

Description: Scrap Heavy Melting Components Consisting Of Items, Pcs. And Cut Pcs. Of Plates, Angles, Silent Block,side Bearer Pad Assembly ,metal Rubber Bonded,bp Valve Fp Valve ,cut Pcs Of Metal,channels, Bss Hanger,bump Stop,parting Plate,rounds, Back-stop, Pu Pad,bk-head Spindles, Connecting- Links, Rotory Lock, , Cut Of Angle Cock, Pins, Dirt Collector, Brake Head,, Face Plate,brake , Anchor Link,control Rod,dummy Coupling,shackle Pin, Yoke Pin, Safety Wire Rope,draft Gear Pad,axle Guard With Horn Check,different Type Of Levers,screw Coupling,draw Bar Hook, Bk Beam Hanger,empty Load Box, C.c. Pad Top & Bottom,side Bearer,stricker Casting,yoke Support Plate, Horizontal Lever Set, Main Pull Rod, Empty Tie Rod, Hand Bk Screw, Hand Bk Gear Box,toothed Segment,dirt Collector, Protactiv Tube, Sleeve, Axle Box Guide, Isolated Cock And Mixed With Pins And U/s Broken Parts Of C&w Item Etc Of Sorts & Sizes With Or Wo Attachment Us And Ur, As It Is. Loc- Material Lying At Bin No. A-1 In Scrap Yard Judw. Remarks- Loading By Purchaser. Note-nfs Will Be Taken Back If Found In Lot At The Time Of Delivery.

Description: Lock Bolt ( 12.70 Mm ) Dia With Coller And Zink Plated Grip Range Min 38.10 Mm To Max 44.45 Mm , Grip No.24. Confirming To Rdso Spec. No. Is/rdso-wd/0001:2022

Description: Description -02 Nos. Over-aged Wagons As Per Below Details.(remarks:-(1). Disposal Weight As Mentioned Against Each Wagon Is Approximate Only And For Reference Only. (2). Excluded Fittings To Be Handed Over To Consignee (i.e. Wheel Sets With Complete Trollys & Other Fitting Like Cbc, Cbc Lock, Yoke, Yoke Pin,draft Knuckle, Knuckle Pin, Dv, Brake Cylinders & Be Pull Rod) As Available At Site As Per Letter No.l.no. Mech/hq/003/007/4016 Dtd. 12.11.18 And (3) Front Follower Of Draft Gear Has Also Been Included In "excluded List" Vide Crse's Letter No. यांत्रिक मुख्यालय/010/010 Warranty, Dtd 09.06.20 So The Front Follower Will Be Retained By The Consignee.(4). Material To Be Sold On "as Is Where Is Basis" And Material Will Be Delivered In Nos.)

Description: Lock Nut Size M -10 As Per Din-6926