Locker Tenders

Description: M S Heavy Melting Actual Lot No. 03122505 0538. Pl No.98050047 (15) (hsn Code 72044900-gst18% On Fcm Basis) Ms Scrap Of Cond. & Unserviceable Heavy Melting Angle And Channel Pcs, Rod Pcs Stands Valves Levers Bolts And Nuts Rivets Washers Pins Dv Covers Bushes Brake Shoes Shackles Shackle Stones Strips J Bolts Hand Brake Wheels Latches Toothed Segments Foot Steps Hanger Brackets Bevel Gear Wheels Horizontal Levers Door Hinges Flanges Wedges Cut Bits, Ms Sheets Side Barer Housings Pipe Pcs. Straps, Jacks, Mould Shoes, Liners Sheets Pipe Pcs. Pins Throwers Locks Races Collars Axle Box Covers, Liners, And Other Misc Items Of Wagons S&t And Ttm Sorts & Sizes Full Or Broken With Or Without Attachments. Location: Road No.3 (image Attached) (note: 1. If Any Ss/ Corten Steel & Non-ferrous Items Found During Loading / Delivery Shall Be Return To The Railways By The Purchaser 2. In Case Of Clubbed Lots, Purchaser Has To Clear The Lots In The Sequence As Mentioned In The Lot Description And No Deviation Is Accepted. 3. No Picking And Choosing Of Material Is Permitted While Taking Delivery )

Description: Supply Of Set Of Worm Shaft And Worm Wheel Gear Along With Worm Shaft Lock Nut And Keys Suitable For Bhel Make Coal Mill Xrp- 803 Of Stage-iii At Wtps.

Description: CATEGORY: Spare Butterfly valve assembly as per specification item no 1 , Spare disc as per specification item no 2 , Spare Seat as per specification item no 3 , Spare Taper Pin with Heli Lock Nut as per specification item no 4 , Spare Glacier Bearing as per specification item no 5 , Gland Packing as per specification item no 6 , Bottom Packing as per specification item no 7 , Hand Wheel as per specification item no 8 , Seal Kit for Double Acting Rack as per specification item no 9

Description: Set Of Operating Device Arrangement For Cbc Assembly As Per sr.dee/rs/nr/ Gzb Drg. No. 214/3 Phase/2010 Sheet No. 1 & 2 Alt-1. One set Consists 10 Items 13 Nos As Per Sr.dee/ Rs/nr/gzb Drg. No. 214/3phase/2010 Sheet No. 1 & 2 Alt-1(1) Operating Rod With Handle qty-01 No. (2) Cbc Opening Rod Qty-01 No.(3) Bracket Short Qty-01 No. (4) Bracket Long Qty-01 No.(5) Locking Piece Qty-01 No.(6) Special screw Qty. 01 No.(7) Make Up Piece Qty. 01 No. (8) Screw M-6x85 Lg Qty- 02 Nos.(9) Nut Hex M8 Qty-02 Nos.(10) Allen Bolt M8x20 Lg Qty-02 Nos

Description: Divisional Stores Depot-guntur [andhra Pradesh] Condemned And Unserviceable Ms Scrap Consisting Of Released Of Various Types Of Cut Off Angle Cock, Inner Springs, Outer Springs, Snubber Springs, Snubber Springs Hs, Adopter Narrow Jaw, Operating Handle, Hand Brake Wheels And Rods, Curved Sheets All Types, Flap Doors For Box/n, Flap Doors For Bcn, Primary Vertical Damper, Primary Spring For Lhb Non-ac Coaches (outer), Primary Spring Outer For Generator Car, Primary Spring Outer For Chair Car, Primary Spring For Lhb Non-ac Coaches (inner), Foot Step Arrangement To Icf, Foot Step Arrangement To Icf, Yaw Damper, Lever Hanger 20x100x382 (without Bushes), Lever 20 X 100 X 522mm Without Bushes, Double Acting Hydraulic Shock Absorber For Vertical Application [600 Kgs Capacity], Cut Off Angle Cock With Vent For Coaching, Push Type Flushing Valve[powder Coated] For Non-a.c Coaches To Icf, Destination Board, Special Destination Board To Icf, Articulated Lock Lift Assembly, Coupler Body With Shank Wear Plate, Knuckle Conforming To Str No. Wd-70-bd-10 (rev.2, Wearing Plate Finish Machined For Side Bearer, Hanger For Bogie Bolster Suspension, Gangway Bridge Mounting Complete, Ball Valve 1" Iron, Helical Spring [centre Less Ground] For Bogie Bolster Suspension, Brake Beam Complete [without Bush] Dimension 1752mm [distance Between Two Holes Of Dia 14mm Should Be Equispaced From Centre Line, Galvanized Mild Steel Tubes 25 Mm, M.s Equal Leg Angles 40x40x6mm, Mild Steel Sheet, Broken Bolster For Freight And Other Ms Scrap .etc., Total Weight: 11.240 Mts. Location: In Bin No: 15. Delivery On Actual Weighment Basis Only. Note: Cutting Is Permitted Into Loadable Sizes Only.

Description: Pl No.98057054, Sc. Melting Gr.d Consisting Of Bolt And Nuts Different Section, M-16 Bolt, M-20 Long Bolt, M-20 Nuts, Sealing Coller, Retaining Steel Ring, Locking Plate, T-20 Washer, Iron Frame Cover, Security Disc And Plate, M-20 Axle Cap Screw And Broken Ferrous Scrap Of Icf/dm Roller Bearing Components In Sorts And Sizes. Please Check Special Condition And Detailed Conditions / Amendments / Modifications If Any In Depot Condition Before Bidding.

Description: Scrap Ferrous Cast Steel Consisting Of Various Types Of End Shields,bearing Caps,housing Bearing Casing, Bearing Sleeves, Bearing Locking Plates ,rings And Other Scrap Components Of Sorts And Sizes. Pl-98050060

Description: CATEGORY: Safe Deposit Locker Cabinets (V2) as per IS 5244 (Q2)

Description: Released, Condemned And U/s Ms Scrap Consisting {line Box, Senetisor Stand, Almirah, Pad Lock Etc}, Qty-750.00 Kg, Location- Loco Store Near Diesel Shed Dadn. Mode Of Delivery By Actual Weighment Basis And On As Is Where Is Basis, Custodian- Ctcc-dadn, Fdp-50 Days. Note- Cutting Permitted For Loadable Size Not Into Small Pieces On The Same Day Of Delivery.

Description: CATEGORY: LOCKING NUT DRG NO. 672-30-24.