Locker Tenders

Description: Disposal Of Ferrous Scrap Released Materials (cast Steel) Such As : (1) Adapter, Qty=94 Nos.=1175 Kg. (2) Knuckle, Qty=75 Nos.=2700 Kg. (3) Coupler Body, Qty=14 Nos.=2268 Kg. (4) Draft, Qty=15 Nos.=2160 Kg. (5) Bolster, Qty=01 Nos.=445 Kg. (6) Yoke, Qty=02 Nos.=196 Kg. (7) Bk. Beam, Qty=04 Nos.=280 Kg. (8) Top Casting, Qty=14 Nos.=658 Kg. (9) Angle Cock, Qty=210 Nos.=364 Kg. (10) Loaded Gear Box, Qty=03 Nos.=25 Kg. (11) A9 Valve, Qty=01 Nos.=10 Kg. (12) Cut Off Pieces Of Material (cs), Qty=2485 Kg. (13) Cond. Tools & Plant(cs), Qty=216 Nos.=124.2 Kg. (14) Bearing Off Size, Qty=48 Nos.=52 Kg. (15) Cbc Lock, Qty=10 Nos.=64 Kg. (16) Packing For Height Adjustment 37mm. Having Local Lot No. 11/ptru/24. Location:- Inside Scrap Shed Ptru Under Sse/cw/ic/ptru.

Description: CATEGORY: HINGED BOLT M12X60.46 , BUTTERFLY NUT M12.34 , CLAMP SHACKLE , BRACKET , SHACKLE , HINGED BOLT M10X55.34 , BUTTERFLY NUT M12 L C59-1 , NUT M10-6H.10 , BUTTERFLY NUT M16 L C59-1 , BUTTERFLY NUT M10.34 , WELDED STUD , PINTLE , BASKET , HOOK , NUT 12-6H.10 , TEE WRENCH WITH FLAT END FOR PLUGS OF FILLING AND SOUNDING DECK SOCKETS DN 65 , FLAT SPANNER WRENCH FOR PLUGS OF FILLING DECK SOCKETS DN 150 200 , TEE WRENCH FOR DECK SOCKET SHANKS OF VALVE ROD GEARINGS , TEE UNIVERSAL-JOINT WRENCH FOR DECK SOCKET SHANKS OF VALVE ROD GEARINGS , NUT , SPRING WASHER I-1-2- 25X14X1.6X0.5 GOST 3057-90 , LOCK PIN 2X25.2.01.9 GOST 397-79 , PIN , WASHER 10.01 05 GOST 6958 , LOCK PIN 3.2X18.2.01.9 GOST 397 , STUD L 60 , STUD L 380 , STUD L 480 , CUSHION L 56 , CUSHION L 60 , CUSHION L 102 , CUSHION L 110 , CUSHION L 116

Description: Scrap Ferrous Cast Steel Consisting Of Various Types Of End Shields,bearing Caps,housing Bearing Casing, Bearing Sleeves, Bearing Locking Plates ,rings And Other Scrap Components Of Sorts And Sizes. Pl-98050060

Description: Locking Plate For Axle Box Of Wap4 & Wag7 Locos Etc.

Description: Pl No.98050126] Scrap Cond./released/unserviceable Ms Scrap Such As Cbc Coupler Bodies, Angels Channels, Signal Rods, Dash Pot, Yokes, Draft Gears Sets, Ms Sheets, Winch For Lc Gate, Lever Lock, Lever Rods, Pull Rods, Suspension Tube, Housing Axle Bearing, Chequered Plates, Cbc Operating Handle, Rel Hook, Anti Roll Bracket, Dradger Drum, Ms Stool, Centring Disc, Ms Liners, Center Pivot Washer, Brake Shoe Head, Center Pivot Ring, Side Frame Key, Adopter Narrow Jaw, Anti Roll Bar, Bolts & Nuts, Wear Plate, Adopter Wide Jaw, Suspension Rods ,equalizing Stay, Erc Clips, Wagon Doors, Rail Flange, Chain Hook,hydraulic Motor, Pipe Fittings, Rotary Shield With Bearings, Sab Parts, Ls Beam, Hangers, Brake Levers, Brake Hangers, Ms Plates Of Elastomeric Pad, Adapter Broken, Center Pivot Top, Anvil, Workdout Sab, Gib Crane, Bracket, Plate Screws, Knuckle, Fabricated Test Rig, Gear Wheel, Anchor Link, Brake Beam, Axle Box Housing, Bearing Plates, Rivette, Chirr Plate, Ms Bed Plate, Ms Guage Tie Plate, Structure Bar, Ms Tie Plates, Slide Chaires, Brake Shoe Head, Locking Plate, Long Pull Rod, Operating Handle, Cbc Lock, Cbc Yoke, Lower Spring Sheet Beam, Center Beams, Center Pivot Washer, Screw Couplings, Pipes, Buffer Plungers, Buffer Casings, Draw Gear Hooks, Silent Blocks, Cut Off Sheets, Iron Rods, Face Plate, Base Bench Wise,savueesing Cylinder, Lifting Bcm Roll, Tamping Arm, And Other Items Coming Under Ms Scrap On As Is Where Is Condition Available Under The Custody Of Cdms 08 Ward Ap.note: Pick And Choose Of The Material Are Not Allowed. Loading To Be Started From One End And To Be Ended On Other End Only. (loc:bin No 0119 At Scrap Yard

Description: CATEGORY: ROTARY AIR LOCK FEEDER SEW EURO DRIVE HELICAL BEVEL GEAR UNIT KAF87/A WITH GEARED MOTOR

Description: Clevis With Handle For Tight Lock Coupler

Description: CATEGORY: CYLINDRICAL PIN 6110401 CVP 2100 , IMPELLER LOCK NUT 3300101 KBL PUMP , PCKG GLD 1 2 2290101 KBL CVP 2100 , BRG LOCKNUT 3350101 KBL PUMP , SET OF FASTENERS KBL PUMP CVP 2100

Description: Divisional Stores Depot - Guntur [andhra Pradesh] Condemned And Unserviceable Ms Scrap Consisting Of Released Of Various Types Of Ms Bonds [different Type], Number Plates, Bg Push Trolley Complete With Bench, Curved Sheets, Boxn Doors, Bcn Doors, Outer Coil Springs, Inner Coil Springs, Chairs, Tables, S&t Location Boxes Full And Small, Rail Cum Road Trolley, Flap Door For Boxn, Flap Door For Bcn,ms Sheets, Lock Lifter Assemble, Lock For Cbc, Operating Handle, Brackets For Load/empty Device, Side Bearer Top Housing, Foot Boards, Hand Brake Wheel, Knuckle Pins, Push Rod For Brake Gear, Axle Pulley 4.5 Kw , 2v 1100ah Vrla Batteries Modulars, Led 9w Single Light Fitting, Led Based Reading Light Fitting , 2 Feet Twin Tube Light Fitting Etc., Total Weight : 22.972 Mts, Location: In Bin No: 15 & 16. Delivery On Actual Weighment Basis Only.

Description: CATEGORY: AUTO CLAVE MACHINE HIGH PRESSURE , BP APPARATUS , CARDIAC TABLE , CRASH CART TROLLEY , DEFIBRILLATOR , DIGITAL GUN THERMOMETER , DRESSING TRAY , ECG MACHINE , ECG TABLE , GLUCOMETER , ICU BEDS , INSTRUMENT TROLLEY , IV STANDS , MONITOR , CLERICAL TABLE , CLERICAL CHAIR , STEEL PERSONAL LOCKER , VISITOR CHAIR , BED SIDE LOCKER , PATIENT ROLLER SHIFTER , PULSE OXIMETER , STHETHOSCOPE , WHEEL CHAIR , BEDSIDE SCREEN , WALKERS , PATIENT FOOT STEPS , DRESSING TROLLEYS , AUTOCLAVE BINS , AUTOCLACE BINS