East Singhbhum Tenders

CATEGORY: Lamp Ballast for HPSV Lamps as per IS 15882:2009, IS 15885 (Q3)

BOQ ITEMS: Earth work in excavation by mechanicalin means manul means including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 150m in all kind of soil., Earth rock filling including transporting laying spreadding rolling filling of voids with smaller particles etc as directed by E.I.C from west disposal yard of BND , Providing laying spreading and compacting stone aggregate size range 53mm to .075 mm to wet mix macadam WMM specification including premixing the materials with water at OMC in for all leads and lifts laying in uniform layers with mechanical paverfinisher in sub base base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achive the desired density complete as per specifition and direction of EIC, Scarifying metalled water-bond road surface inculiding disposal of rubbish led up to 50m and consolidation of aggregate receved from scarifying with power road roller of 8 to 10 tonne capacity. , Providing and applying prime coat using bitumen emulsion conforming to IS 8887 using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom. With rapid setting bitumen emulsion On WBM or WMM AT RATE OF 0.4kg per sqm, Providing and aplying tack coat Bitumen will be provided by UCIL free of cost , Providing and laying premix bituminous macadam base course with stone aggregate of quality size and grading as specified in CPWD specifaction and straight run bitumen of grade 80-100 at rate of 4 percentage by weight of total mix including hot mixing of stone aggregate and bitumen in hot mix plant transporting mixed material and laying mixed material with paver finisher to the required level and grade rolling with road roller of 8 to 10 tonne capacity to achieve the required compaction and density. 75 mm compacted thickness Bitumen will be provided by UCIL free of cost , Providing and laying sand seal coat of premixed fine aggregate passing 2.36 mm and retained on 180 micron sieve with bitumen using 128 kg of bitumen of grade 80 100 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road roller all complete .Bitumen will be provided by UCIL free of cost

CATEGORY: High Chrome Steel Grinding Ball Size: 40mm Dia as per Annexure-A attached. , High Chrome Steel Grinding Ball Size: 100mm Dia as per Annexure-A attached.

CATEGORY: Conveyor belt Size 800 mm Width, 5 ply, Top layer 3.00 mm and Bottom layer 1.5mm Grade M24

Computer Controlled Microhardness Tester

CATEGORY: Wire Rope, Size- 18mm , Wire Rope, Size- 16mm , Wire Rope, Size- 14mm , Wire Rope, Size- 12mm , Wire Rope, Size- 6mm

CATEGORY: Oil Filter Kit Part No.- 907A050000055 , Fuel Filter insert Part No-907A050000052 , Fuel Filter Part No- 907A050000053 , Fuel Filter insert Part No-907A050000054 , Filter Element, Primary Part No-EEA0027698 , Filter Element, Safety Part No-EEA0027699 , Hydraulic Filter Element Part No-EEA0003479 , Brake Oil Filter Element Part No-EEA0018438 , Transmission Filter Part No-EEA0026790

CATEGORY: Split Air Conditioner Including Green AC, Wall Mount Type (V2) (Q2)

CATEGORY: Fluidized Bed Reactor System for 1200 Deg C Design Temp and 20 Bar G Pressure for 2 Gases

CATEGORY: Pilot operated, balance piston relief valve, Part No-RPEC- CAN-3000-PSI-1C8 fitted in Underground vehicle ST-3.5 or 710 and MT-2010 , Valve Unloading, Part No-QCDB-LAN fitted in Underground vehicle ST-3.5 or 710 and MT-2010 , Cartridge, Part No-NQEB-XAN fitted in Underground vehicle ST-3.5 or 710 and MT-2010 , Pilot valve, Part No-RSFC-FEN fitted in Underground vehicle ST-3.5 or 710 and MT-2010 , Valve Part No-CKEB-XCN fitted in Underground vehicle ST- 3.5 or 710 and MT-2010 , Valve Part No-CSAB-XXN fitted in Underground vehicle ST-3.5 or 710 and MT-2010