Wood Tenders

Details: Description Invitation To Bid The Local Government Unit Of Sindangan, Through Its Bids And Awards Committee (bac), Hereby Invites Suppliers/manufacturers/ Distributors/contractors To Apply For Eligibility And To Bid For The Hereunder Project. Purchase Request No. Project Approved Budget For The Contract Non - Refundable Fees Of Bid Documents 1.) 2025-01- 21 Purchase & Installation Of Various Equipment For The Establishment Of Lgu Sindangan People's Dialysis Center P23,000,000.00 25,000.00 1 Set Item 1: First Pass Reverse Osmosis System The First Pass Reverse Osmosis System Should Include The Following Components And Specifications: " Ro Pumps: O Quantity: 2 Units (alternating) O Type: 2 Hp Single Phase Reverse Osmosis Multi-stage Vertical Pumps O Operating Pressure: 200 To 250 Psi O Material: High-grade Stainless Steel Construction O Backup Function: 1 Unit Will Function Automatically When The Other Pump Stops.  Membranes: O Quantity: 3 Units O Type: 4040 Thin Film Composite (tfc) Spiral Wound Membranes O Design: Large Spiral Configuration For High Permeate Flow.  Pressure Vessels: O Quantity: 3 Units O Type: 4040 Frp Pressure Membrane Vessel.  Pre-filtration: O Quantity: 1 Unit O Type: 20"" Slim Filter Housing With 5-micron Sediment Filter (clear Housing)." " Aami Standard Compliance: All Components In Contact With Pure Water Must Meet Aami (association For The Advancement Of Medical Instrumentation) Standards.  Flow Meters: O Quantity: 2 Units (panel-mounted) O Range: 0-10 Gpm O Measurement: Percentage Rejection, Percentage Recovery, And Permeate/product Flow.  Additional Flow Meters: O Quantity: 1 Unit (for Recycle Water Flow Monitoring).  Pressure Gauges: O Quantity: 2 Units (dial Type) O Pressure Rating: 350 Psi And 150 Psi O Material: Stainless Steel Construction.  Pressure Regulator Control Valve: O Quantity: 1 Unit O Size: 1” Npt O Material: Stainless Steel 316.  Conductivity Meter:  Quantity: 1 Unit" " Type: Digital Conductivity Meter (tds Meter For First-stage Pure Water Product).  Automatic Control System: Integrated Automatic Control System For Managing The Operation Of The Ro System.  Recycle Valve And Flushing Option: The System Should Be Equipped With A Recycle Valve And An Automatic Flushing Option.  Low-pressure Switch:  Quantity: 1 Unit  Function: Automatically Stops The Ro Pump When Low Pressure Is Detected.  Solenoid Valves:  Automatic Shut-off Solenoid Valve: 1” Npt (manual Bypass In Case Of Malfunction).  Auto Flushing Solenoid Valve: 1/2” Npt.  Skid Frame:  Material: Stainless Steel Full Skid Frame For Mounting All System Components.  Independent Control System: For Monitoring And Controlling The Ro Process.  Sampling Port: Equipped With A Sampling Port For Pure Water Sampling." 1 Set Item 2: Second Pass Reverse Osmosis Unit The Second Pass Reverse Osmosis Unit Should Include The Following Components And Specifications: " Ro Pumps: O Quantity: 2 Units (alternating) O Type: 1.5 Hp Reverse Osmosis Multi-stage Vertical Pumps O Operating Pressure: 200 To 250 Psi O Material: High-grade Stainless Steel Construction O Backup Function: 1 Unit Will Function Automatically When The Other Pump Stops.  Pressure Vessels: O Quantity: 2 Units O Type: 4040 Frp Pressure Membrane Vessel." 1 Set Item 3: Pre-treatment Equipment Specifications The Pre-treatment Equipment Includes The Following Components: " Multi-media Filtration Unit: O Quantity: 1 Unit O Size: 13” X 54” Frp Tank O Media: Pebbles, Silica Sand, Anthracite, And Garnet For 10-20 Micron Removal. O Backwashing Head: Manual/automatic Timer Backwashing Head. O Accessories: Pressure Gauges On The Inlet And Outlet, Valve For Water Sampling, And Emergency Bypass Valve.  Granulated Activated Carbon Filtration Unit: O Quantity: 2 Units O Size: 13” X 54” Frp Tanks O Media: Pebbles, Quartz Sand, And Industrial-grade Activated Carbon. O Backwashing Head: Manual/automatic Timer Backwashing Head." "o Accessories: Pressure Gauges On The Inlet And Outlet, Valve For Water Sampling, And Emergency Bypass Valve.  Water Softener Filtration Unit: O Quantity: 1 Unit O Size: 13” X 54” Frp Tank O Media: Pebbles And Purolite Resin C-100e. O Backwashing Head: Manual/automatic Timer Backwashing Head. O Accessories: Pressure Gauges On The Inlet And Outlet, Valve For Water Sampling, And Emergency Bypass Valve.  Sampling Ports: Sampling Ports For Multi- Media, Carbon,and Water Softener Filters." " Pressure Gauges: Individual Pressure Gauges For Each Filter (multi-media, Carbon, And Water Softener).  Raw Water Tank: O Quantity: 1 Set O Capacity: 1000 Liters O Material: Polyethylene With Float Valve.  Brine Tank: O Quantity: 1 Unit O Capacity: 130 Kg Of Salt O Accessories: Hose And Strainer.  Raw Water Pump System: O Quantity: 2 Units (alternating) O Type: 1.5 Hp Single Phase Raw Water Multi-stage Horizontal Stainless Steel Pump With Automatic Backup Functionality.  Piping: O Material: Schedule 40 Pvc Pipe With Ball Valves And Fittings. O Fittings: Stainless Steel Fittings." 1 Set Item 4: Support/service Maintenance The Following Services Will Be Included For The Support And Maintenance Of The Water Treatment System: " Installation: Complete Installation Of The Water Treatment System With Training For Operation And Maintenance.  Technical Support: Accessibility For Addressing Any Malfunctions Or Technical Problems Within The Warranty Period.  Spare Parts: Availability Of Local Spare Parts For Maintenance.  Service Personnel: Availability Of Service Personnel Within The Warranty Period.  Operator And Technical Manual: Full Set Of Manuals For Operation And Maintenance.  Initial Water Analysis: Complete Initial Water Quality Analysis To Ensure System Suitability." 1 Set Item 5: 5-station Dialyzer Reprocessing System (wall Mounted For Negative Hepa Patient) The Following Specifications Apply To The 5-station Dialyzer Reprocessing System: " Frame Material: Panel Box-type Frame (pvc Material).  Dialyzer Testing Parameters: Max Testing Pressure: 8-14 Psi.  Pressure Regulator Valve: Adjustable Between 15-35 Psi.  Piping And Fittings: Pvc Pipes And Fittings; Chemical-grade Hoses And Fittings.  Chemical Compatibility: System Must Be Compatible With All Types Of Disinfectants.  Chemical Tank: 10 Liters Polyethylene Chemical Tank.  Dialyzer Connectors: 5 Quick-connect Dialyzer Holders.  Chemical Pump: 1 Unit For Chemical Application.  Electrical Control System: Fully Integrated Electrical Control System For Operation." " Solenoid Valves: Ce Certified Stainless Steel Solenoid Valves For Dialyzer Cleaning, Filling Chemicals, And Auto Reverse Ultrafiltration.  Graduated Cylinder: 250 Ml Plastic Graduated Cylinder. Installation & Training:  Full Installation And Training For Operation, Maintenance, And Safety Procedures. Support/service Maintenance:  Installation And Training: Full Setup And Operator Training.  Technical Support: Access To Local Service Personnel During Warranty Period.  Spare Parts Availability: Availability Of Spare Parts Locally During The Warranty Period.  Technical Manual: Full Operator And Technical Manuals." 1 Set Item 6: 2 Station Dialyzer Reprocessing Machine For Positive Hepa Patient "specifications:  Frame Material O Panel Box Type (pvc Materials)  Dialyzer Testing Parameters O 1 Unit Dialyzer Testing Parameters With Maximum Pressure Range: 8-14 Psi  Pressure Regulator Valve O 1 Unit Adjustable Pressure Regulator Valve, Range: 15-35 Psi  Piping And Fittings O Pvc Pipe And Fittings  Chemical Grade Hose And Fittings O Chemical-grade Hose And Fittings For Safe Operation With Disinfectants And Cleaning Solutions." " Compatibility O Machine Is Compatible With Any Type Of Disinfectant Commonly Used In Dialyzer Reprocessing.  Electrical Control System O Integrated Electrical Control System For Efficient Operation. " " Electronic Control Board O 1 Unit Electronic Control Board Designed To Manage Dialyzer Testing Parameters. Solenoid Valves For Dialyzer Cleaning O 2 Pcs Ce Certified Stainless Steel (s/s) Solenoid Valves For Dialyzer Cleaning Procedure.  Solenoid Valves For Chemical Filling  2 Pcs Ce Certified Stainless Steel (s/s) Solenoid Valves For Dialyzer Chemical Filling.  Solenoid Valves For Auto Reverse Ultra Filtrate  2 Pcs Ce Certified Stainless Steel (s/s) Solenoid Valves For Auto Reverse Ultra Filtrate During The Cleaning Cycle." " Programmable Logic Controller (plc)  1 Unit Plc (programmable Logic Controller) With The Following Specifications: O Input: 16 Digital Inputs O Output: 10 Digital Outputs O Voltage: 110-240vac  Secondary Programmable Logic Controller (plc)  1 Unit Secondary Plc With The Following Specifications: O Input: 10 Digital Inputs O Output: 4 Digital Outputs O Voltage: 110-240vac  Illuminated Push Button Switches (rinsing Procedure)  2 Units Of Illuminated Green Push Button Switches (indicating Rinsing Procedure Is Active).  Illuminated Push Button Switches (chemical Filling)  2 Units Of Illuminated Red Push Button Switches (indicating Chemical Filling Is In Progress)." " Diaphragm Type Air Pump  1 Unit Diaphragm-type Air Pump To Provide Necessary Air Pressure For The System.  Plastic Graduated Cylinder  1 Unit 250 Ml Plastic Graduated Cylinder For Accurate Measurement.  Dialyzer Connector  2 Pcs Dialyzer Connectors For Secure And Leak-free Connections During Operation. Support/service Maintenance:  Installation And Training O On-site Installation And Operator Training To Ensure Proper Usage And Maintenance.  Technical Support O Quick Access To Technical Support And Troubleshooting Services During The Warranty Period." " Spare Parts Availability O Local Availability Of Critical Spare Parts To Minimize Downtime.  Service Personnel Availability O Availability Of Trained Service Personnel To Address Any Operational Issues During The Warranty Period.  Operator And Technical Manual O Comprehensive Operator And Technical Manuals Provided For Easy Reference And Proper Maintenance." 2 Sets Item 7: Acid & Bi-carb Mixer Specifications: " 1 Unit Mix Flow Agitator Pump With Propeller  1 Unit Magnet Chemical Pump  1 Unit 100 Liters Polyethylene Conical Tank With Stainless Steel Base  1 Unit 10"" Filter Housing With Micron Filter  Electrical Control System With Panel Box  Pvc Pipe And Fittings Support/service Maintenance:  Installation And Training For Operation And Maintenance.  Accessibility To Address Malfunctions Or Technical Issues Within The Warranty Period.  Availability Of Spare Parts Locally To Minimize Downtime.  Availability Of Service Personnel During The Warranty Period For Prompt Assistance.  Operator And Technical Manual With Detailed Instructions On Operation, Troubleshooting, And Maintenance." 1 Set Item 8: Construction Of Wood Paneling Specifications: " Fabrication Of Wood Paneling Using ¾"" Marine Plywood, Finished With Laminate Formica.  Supply And Installation Of Recirculation Piping System Using Schedule 40 High- Pressure Pipe And Fittings." 1 Set Item 9: Dialyzer Rack Specifications: " Floor-to-ceiling Rack Designed To Hold 110 Dialyzer Units With Secure Storage And Easy Access." 1 Set Item 10: Defibrillator Technical Specifications: " Defibrillator Type: Manual, Synchronized, Asynchronous  Energy Accuracy: ±1%  Energy Selection: 0, 20, 50, 100, 160, 250, 300, 360 Joules (nominal At A Resistance Of 50)  Charging Time: Maximum 10 Seconds To 360 Joules  Standard Adult/pediatric Paddles: Reusable External Adult Paddles (pediatric Paddles Integrated)" "power Requirements:  Ac Power Supply: 100v~240v, 50hz/60hz  Vehicle Voltage (optional): Dc 12v Internal Battery Backup:  Battery Type: Rechargeable Lead-acid Battery (12v 2.0ah X2)  Charging Time: Minimum 4 Hours For Full Charge  Battery Charging: Charged During Ac Power Supply Operation  Charging/low Battery Indication: Red Led  Battery Capacity: 100% Charge Provides 120 Minutes Of Monitoring Or 35 Discharges At 360 Joules. " "display: Lcd Dimensions: 7-inch High-resolution True-color Graphic Display Ecg Features:  Ecg Lead: I, Ii, Iii, Avr, Avl, Avf, V1~v6  S-t Segment Analysis: -2.0mv~+2.0mv  Arrhythmia Analysis: Yes  Protection: Withstands 4000v Ac/50hz Voltage Isolation And Protection Against Electrosurgical Knives And Defibrillation. Respiration:  Measurement Method: Thoracic Impedance Standard Configuration:" " Ecg, Respiration, Defibrillator Monitoring Optional Parameters:  Recorder  Li-ion Battery (11.1v 4ah X2) Support/service Maintenance:  Installation And Training On Device Setup And Use.  Accessibility To Address Malfunctions Or Technical Issues Within The Warranty Period.  Availability Of Spare Parts Locally To Minimize Downtime.  Availability Of Service Personnel Within The Warranty Period For Fast Response And Repairs.  Operator And Technical Manual With Comprehensive Guides For Safe Operation And Maintenance." 15 Sets Item 11: Hemodialysis Machine With Hemodialysis Chairs, Machine Avr & Television Set "the Hemodialysis Machine With Hemodialysis Chairs & Avr Is A High-performance Medical Device Designed To Efficiently Support Various Dialysis Treatments, Including Hemodialysis (hd), Intermittent Ultrafiltration (iuf), Low Flux Continuous Dialysis, High-pressure (hp) Treatments, Plasma Exchange, And Plasma Adsorption. This System Ensures The Safe, Efficient, And Precise Treatment Of Patients With Renal Failure. Key Features: 1. Intelligent Operation:  Lcd Touch Screen: A Multi-angle Rotating Screen With A Multi-language Interface (chinese, English, Etc.), Ensuring Easy Operation And Accessibility.  Guided Operation Interface: Simplifies User Interaction, Providing Step-by-step Guidance For Efficient Machine Operation.  Automated Power On/off & Disinfection: Automatic Settings For Daily Power Cycles And Disinfection Procedures, All Conditions Are Recorded For Traceability.  Automatic Venous Level Detector: Prevents Blood Exposure To Air, Reducing The Risk Of Contamination.  Kt/v Calculation: Monitors Dialysis Efficiency And Ensures Treatment Adequacy.  Substitution Automatic Rinsing: Reduces Hospital Staff Workload And Minimizes Operational Costs." " Automatic Dialyzer Charging & Discharging: Enhances Operational Efficiency And Reduces Manual Labor.  Real-time History Recording: Treatment Parameters, Patient Info, And Running Conditions Can Be Recorded And Retrieved In Real-time For Optimal Monitoring.  Intelligent Maintenance System: Ensures Easy Maintenance And Alerts Users To Any Issues.  Brushless Rotor: Increases System Longevity And Simplifies Maintenance.  Ultrafiltration Clearance: Achieves A 0.1% Accuracy In Ultrafiltration, Improving Dialysis Outcomes.  Three Motor Pump: Ensures Steady, Reliable Fluid Management Throughout The Treatment.  Upgradeable Operating System: The Machine’s Software Can Be Upgraded For Enhanced Functionality. 2. Safety Features:  Individual System Control: Separate Control Of Blood, Hydraulic, And Monitor Systems, Each Equipped With Safety Protocols.  Mandatory Testing: Over Ten Mandatory Tests For Systems Such As Balance, Mixing, Uf, Air Detection, Blood Leakage, Etc., Ensuring Reliable Machine Performance.  Hydraulic And Leakage Monitoring: Ensures Safety During Dehydration Processes And Prevents Leaks.  Ultrasonic & Optical Venous Monitoring: Ensures Safe Blood Return By Detecting Tiny Bubbles." " Led And Audio Alarms: Multi-color Led (red, Yellow, Green) Indicators, Coupled With Various Sound Alarms For Enhanced User-friendliness.  Backup Power Supply: Provides 40 Minutes Of Backup Power In Case Of An Electrical Outage.  Ap, Vp, Tmp Monitoring: Quick Alarm Alerts For Abnormal Pressure Conditions.  Double-stage Endotoxin Filtration: Ensures The Substitution Fluid Meets Aami Standards For Quality.  Advanced Volume Balance Control: Maintains Accurate Ultrafiltration For Precise Patient Treatment.  Dialysate Mixing System: Ensures Accurate Ionic Concentration In The Dialysate For Optimal Treatment.  Integrated Air Detection And Blood Recognition: Detects Even The Smallest Air Bubbles To Prevent Safety Risks. " " Bicarb Fluid: Helps Avoid Microbial Contamination In The B Fluid. 3. Powerful Functionality:  Syringe Support: Includes 10ml, 20ml, 30ml, And 50ml Syringes, Which Are Automatically Recognized And Can Be Self- Tested For Errors. Fully Supports Heparin Profile Management.  Automatic Vital Signs Monitoring: The Machine Automatically Tracks Patient Heart Rate And Blood Pressure During Treatment, Reducing Staff Workload.  Ultra-pure Dialysate Supply: Ensures The Highest Quality Of Dialysis Fluid For Improved Patient Outcomes." " Isolated Hp Mode: Reduces Self-test Time And Minimizes Dialysate Wastage.  Customizable Dialysate Formula: Pre-set And Customizable Dialysate Formulations Are Compatible With A Wide Range Of Solutions Or Powders.  Flexible Dialysis Options: Supports Both Single And Double-needle Dialysis Configurations For Varying Clinical Needs.  Standard And Custom Profiles: Offers Customizable Profiles For Sodium, Uf Rate, Bicarbonate, Heparin Flow, Dialysate Flow, And Temperature, Tailoring Treatment To Individual Patient Needs.  Sequential Dialysis Process: Supports Treatments Such As Sequential Dialysis (hd→iuf) Or High-low Sodium Sequential Dialysis.  Network Usb Integration: Enables Patient Data And Machine Management Through Central Systems." " Central Dialysate Supply Integration: Seamlessly Connects To Centralized Dialysate Supply Systems. Support & Service Maintenance:  Installation And Training: Comprehensive Installation Services, Followed By Operator And Technical Training To Ensure Proper Use And Maintenance Of The Machine.  Warranty And Maintenance: Access To Technical Support For Any Malfunction Or Issues Within The Warranty Period. Local Spare Parts Availability Ensures Minimal Downtime.  Manuals: Detailed Operator And Technical Manuals Are Provided For Ease Of Reference.  Selector Switch For Auto/manual/test Gen  Pilot Lights For Normal And Emergency Conditions" 1 Set Item 12. Pabx / Telephone System " Line Transfer Capability: Supports Transfer From 3 Trunk Lines To 8 Local Lines.  Display: Backlit Lcd Screen For Easy Readability In Various Lighting Conditions.  Audio Features: Hands-free Operation With Full Duplex Functionality For Clear Communication.  Headset Support: Includes Optional Support For Electronic Hook Switch (ehs) Headsets.  Navigation: Features A Cursor And Directory Dial Key For Easy Navigation Through Contacts.  Network Compatibility: Supports 10/100/1g Ethernet For Reliable And High-speed Communication.  Power Options: Power Over Ethernet (poe) Support Or Optional External Power Adapter.  Voip Security: End-to-end Voip Encryption To Secure All Communications.  Mounting: Wall-mountable Design For Space-saving And Flexible Installation. Support/service Maintenance:" " Installation & Training: Comprehensive Installation And User Training Provided To Ensure Optimal System Usage.  Warranty Support: Accessible Support For Troubleshooting And Resolving Technical Issues Within The Warranty Period.  Spare Parts Availability: Local Availability Of Replacement Parts To Minimize Downtime.  Service Personnel: On-site Service Personnel Available Within The Warranty Period For Repairs And Technical Assistance.  Documentation: Detailed Operator And Technical Manuals Included For Ease Of Use And Reference." 1 Set Item 13. Manpower Pooling, Trainings & Seminars " Staff Hiring: Professional Staff Recruitment Services For Laboratory, Dialysis, And Other Essential Healthcare Roles.  Training Programs: O Laboratory & Dialysis Staff: Full- Course Certified Training Program Tailored For Laboratory And Dialysis Personnel, Including Meal Allowances And Accommodation. O Diagnostic Staff: Comprehensive Training For Diagnostic Technicians With Certification, Including Meal Allowances And Accommodation. O Administrative Personnel: Full- Course Certified Training Program For Administrative Staff, With Meal Allowances And Accommodation." "o Administrative Personnel: Full- Course Certified Training Program For Administrative Staff, With Meal Allowances And Accommodation. O Nurses: Full-course Certified Training Program For Nurses, Including Meal Allowances And Accommodation. O Technicians: Certified Technical Training For Medical Equipment Technicians, With Meal Allowances And Accommodation. O Physicians: Full-course Certified Training For Physicians, With Meal Allowances And Accommodation. Each Training Program Is Designed To Ensure Professional Certification And Enhance The Skills Of Healthcare Staff, While Also Providing Full Support For Meals And Accommodation To Ensure A Seamless Learning Experience." 1 Set Item 14. Immunoassay Poct Machine A Compact, Reliable, And High-performance Immunoassay Machine Designed For Point-of-care Testing (poct). Ideal For Rapid Diagnostics, It Ensures High Accuracy And Supports Real-time Testing With Comprehensive Testing Capabilities. Simple Operation And High Throughput Make It Suitable For Various Healthcare Settings, Including Clinics, Hospitals, And Laboratories. "key Features:  Compact And Reliable: Designed For Space Efficiency And Dependable Operation In Busy Environments." " High Accuracy: Equipped With Available Controls And Calibrators To Ensure Precise Results.  Real-time Testing: Provides Immediate Test Results, Enabling Quick Decision- Making.  Simple Operation: User-friendly Interface For Ease Of Use By Healthcare Professionals.  Comprehensive Testing Items: Supports A Wide Range Of Tests, Covering Multiple Aspects Of Patient Health.  High Throughput: Capable Of Processing Large Numbers Of Tests Quickly, Supporting Efficient Workflows." "complete Parameters:  Thyroid Function  Hormones  Cardiac Markers  Inflammation Detection  Renal Function  Digestive Function  Tumor Markers  Allergies  Infectious Diseases  Hba1c, And More. Support/service Maintenance:  Installation And Training: Professional Installation And Operator Training To Ensure Proper Setup And Usage." 1 Set Item 15: Electrolytes Machine "sample Types:  Serum, Plasma, Whole Blood, Cerebrospinal Fluid, Dilute Urine Measuring Speed:  ≤ 25 Seconds Per Test Analysis Method:  Ion Selective Electrode (ise) Sample Volume:  60–150 Μl  200 Μl Sample Capacity:  30 Sample Positions" " 5 Emergency Sample Positions (only For Bke-b/d/f/l Models) Injection Mode:  Manual Or Automatic Injection (only For Bke-b/d/f/l Models)  Manual Injection (for Bke-a/c/e Models) Data Storage:  Up To 50,000 Test Results Printer:  Built-in Thermal Printer Interface:  Rs232 Port For Laboratory Information System (lis) Connectivity Display:  7-inch High-definition Touch Screen Languages Supported:  Chinese And English (other Languages Can Be Customized) Calibration:  Automatic And Manual Calibration Options" "additional Features:  Sample Volume Detection Power Supply:  Ac 110–240v, 50/60hz, 70va Operating Conditions:  Temperature: +10°c To +40°c  Relative Humidity: ≤ 80%  Atmospheric Pressure: 86–106 Kpa Support & Service Maintenance  Installation And Training: Comprehensive Setup And User Training Are Provided.  Technical Support: Access To Support For Any Malfunction Or Technical Issue Within The Warranty Period.  Spare Parts Availability: Spare Parts Are Readily Available Locally.  Service Personnel Availability: Service Technicians Are Available Within The Warranty Period.  Manuals: Operator And Technical Manuals Are Included For Ease Of Use And Maintenance." Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary "pass/fail" Criterion As Specified In The Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The "government Procurement Reform Act". Bids Received In Excess Of The Approved Budget For The Contract (abc) Shall Be Automatically Rejected At Bid Opening. Bid Documents Are Available From February 07, 2025 February 27, 2025 Upon Payment Of Non-refundable Fees Stated Above, From 8:00am To 12:00n And From 1:00pm To 5:00pm, Monday To Friday, And Up To 9:30am On The Last Day Of The Issuance And Acquisition Of Bid Docs, At The Municipal Administrator's Office/bac Secretariat Office, 2nd Fl., Sindangan Municipal Hall (tel. No. (065)224-2750 Or 224-2212). Prospective Bidders Should Have Experience In Undertaking A Similar Project Within The Last Two (2) Years With An Amount Of At Least 50% Of The Proposed Project For Bidding. The Eligibility Check/screening As Well As Preliminary Examination Of Bids Shall Use Non-discretionary “pass/fail” Criteria. Post-qualification Of The Lowest Calculated Bid Shall Be Conducted. The Bac Will Allow A Partial Bid For The Following Items: All Participants Relative To Eligibility Statement And Screening. Bid Security, Performance Security, Pre-bidding Conference(s), Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 And Its Implementing Rules And Regulations (irr). The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1 Issuance Of Bid Document February 07, 2025 8:00 Am 2 Submission Of Bids (deadline) February 27, 2025 9:30 Am 3 Opening Of Bids February 27, 2025 10:00 Am 4 Bid Evaluation February 28, 2025 10:00 Am 5 Post Qualification March 03, 3025 10:00 Am 6 Notice Of Award March 04, 3025 10:00 Am "the Local Government Unit Of Sindangan Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders." Approved By: Fletcher C. Fuertes, Mba Bac Chairman

Details: Description Item No. Qty Unit Items And Description Abc 1 2 Piece Mouse, Optical Wireless, Branded With Battery 440.00 2 2 Piece Usb Flash Drive 3.0, 32gb 440.00 3 1 Set Ballpen Pilot G-tec C3 0.3mm Tip Ball Pen Ball Pens Fine Point Pen 12 Pcs (black) 792.00 4 1 Piece Floor Marking Tape 220.00 5 3 Piece Glossy Photo Paper A4 Size Packs (20 Sheets Per Pack)-235gsm 302.50 6 1 Box Plastic Fastener 50 Pcs 150.00 7 3 Bottle Brother Bt D60 Black Ink 390.00 8 1 Bottle Brother Bt D60 Magenta Ink 390.00 9 1 Bottle Brother Bt D60 Yellow Ink 390.00 10 1 Bottle Brother Bt D60 Cyan Ink 390.00 11 1 Bottle Brother Bt-d60bk Ink Bottle (black) 390.00 12 2 Piece Ink Original Epson 003, Black 295.00 13 1 Piece Heavy Duty Stapler Hd 021 1,200.00 14 30 Piece Envelope, Brown, Long 3.58 15 29 Piece Envelope, Brown, Short 3.30 16 10 Piece Permanent Marker, Fine Tip, Black 50.00 17 6 Piece Ink Original Epson, 003 Black 330.00 18 2 Piece Ink Original Epson, 003 Cyan 330.00 19 2 Piece Ink Original Epson, 003 Magenta 330.00 20 2 Piece Ink Original Epson, 003 Yellow 330.00 21 1 Box Metal Fastener 94.00 22 6 Piece Sign Pen, Medium Tip, Green 31.90 23 2 Piece Wood File Cabinet 6,000.00 24 1 Set Coffee Table 4,000.00 25 2 Can Disinfectant Spray Kills 99.9% Bacteria, 340g (half Early Morning And Half Crisp Berry Lysol) 450.00 26 56 Piece Feeds Sacks 20.00 27 21 Piece Folder Long (white) 7.00 28 5 0 Trashbag, Small 24.00 29 10 0 Trashbag, Medium 40.00 30 10 0 Jrt, 200m, 2 Ply 210.00 31 4 Bottle Ink Original Epson, 003 Black 300.00 32 2 Bottle Ink Original Epson, 003 Cyan 330.00 33 2 Bottle Ink Original Epson, 003 Magenta 330.00 34 2 Bottle Ink Original Epson, 003 Yellow 330.00 35 10 Piece Permanent Marker, Fine Tip, Black 50.00 36 3 Piece Cloud Computing Services 200.00 37 2 Piece Trash Bin, Min.8 Liters, Swing Cover 500.00 38 3 Liter Trash Bin, Min.15 Liters,step-open Plastic 106.00 39 10 Pouch Multi-purpose Cleaner Ajax 1l Rose Fresh 55.00 40 5 Piece Detergent Powder, Flower Scent, All Purpose, 1kg 15.00 41 3 Piece Rags, Face Towel, Cotton Yarn/microfiber 260.00 42 6 Piece Brush For Toilet Bowl With Container Stand, Heavy Duty 270.00 43 10 Piece Brush With Long Handle For Toilet Floor 35.00 44 2 Piece Brush, Hand Brush/short Handle Plastic For Toilet Walls 235.00 45 6 Piece Pail (orocan Green) 150.00 46 30 Bottle Liquid Bleach, 1 Gallon 40.00 47 15 Gallon Liquid Bleach, 1000ml 270.00 48 12 Bottle Liquid Hand Soap, Scented , 1gallon 130.00 49 5 Bottle Hand Soap, Liquid, 500ml, Pump Type Antibacterial, Safeguard 60.00 50 80 Piece Muriatic Acid 500ml 110.00 51 3 Bottle Tissue Jrt, Big Roll, 2ply Min. Of 200m/roll 160.00 52 10 Piece Cleaner, Toilet Bowl And Urinal, 1000ml With Nozzle 136.24 53 3 Piece Broom, Soft (walis Tambo), With Bamboo Handle 27.64 54 15 Can Dust Pan With Long Handle 125.90 55 20 Piece Furniture Cleaner, Aerosol Type, 300ml 15.00 56 10 Can Sand Paper Champ C1000 139.36 57 4 Piece Insecticide, Odorless (not Waterbase), 500ml 100.00 58 15 Bottle Brushes For Spider Web, Extended Handle 45.00 59 5 Bottle Dishwashing Liquid, Min. 250ml 170.00 60 5 Gallon Glass Cleaner Liquid Spray 500ml 360.00 61 15 Piece Glass Cleaner, 1 Gallon 15.00 62 5 Bottle Sponge Steel Wool 4 Pcs Per Pack 75.00 63 25 Piece Sprayer Bottle 500ml Capacity 60.00 64 15 Piece Toilet Deodorizer, 100g 50.00 65 4 Piece Doormat Rug 22.78 66 15 Piece Broom, Stick (walis Ting-ting) 190.00 67 10 Bot Air Freshener Gel, Min. 180g 93.75 68 15 Pack Liquid Sosa 500ml 30.00 69 15 Pack Battery, Dry Cell, Size Aa 30.00 70 10 Piece Battery, Dry Cell, Size Aaa 90.00 71 4 Piece Battery 9v Max Alkaline Heavy Duty 370.00 72 10 Pack Battery 9v Rechargeable 1.00 73 10 Pack Battery Aa Max Alkaline Heavy Duty 2s/pack 110.00 74 10 Piece Battery Aaa Max Alkaline Heavy Duty 2s/pack 160.00 75 10 Piece Bulb Led Daylight Min. 11watts 100.00 76 10 Piece Fluorescent Tube Big Slim 80.00 77 30 Pack Fluorescent Tube Small Slim 30.00 78 20 Piece Specialty Paper 200gsm Worx Long For Property Card And Stock Card 12.00 79 6 Piece Photopaper, Glossy A4 With 20 Sheets Per Pack 284.84 80 10 Pcs Philippine National Flag, 100% Polyester 15.00 81 3 Can Licealis 10ml U 500.00 82 8 Can Air Freshener Glade Automatic Spray 250.00 83 80 Pack Air Freshener Refill For Glade Automatic Spray 19.50 84 192 Bottle Butter Coconut Biscuit 90g 7.25 85 30 Pack Mineral Water Natures Spring 375ml 35.00 86 40 Pack Biscuits 65.00 87 16 Pack Paper Cups 6oz, 50pcs/pack 20.00 88 14 Pack Stirrer 100pcs Per Pack 25.00 89 5 Piece Tissue Pullnaps 2ply 350.00 90 6 Can Rust Remover Wd40 Industrial (not Quickly Dry) 110.00 91 10 Bottle Stain Remover, Wipeout 65.00 92 3 Gal Varnish Natural 580.00 93 2 Piece Tile Red 40.00 94 2 Piece Paint Brush #2 90.00 95 2 Piece Paint Brush #3 100.00 96 6 Piece Paint Brush #7 90.00 97 3 Piece Roller Brush #8 90.00 98 3 Piece Roller Brush/ Babyroller 90.00 99 3 Piece Roller Brush #9 70.00 100 4 Piece Feather Duster 150.00 101 2 Piece Chair (small) 100.00 102 2 Piece Carburandum 200.00 103 5 Bottle Ink Original Epson, 003 Black 330.00 104 5 Pc White Plastic Eraser (soft And Latex Free) 20.00 105 2 Bottle White Glue. 250 Grams 70.00 106 2 Box Paper Fastener Coated (plastic) 42.00 107 2 Pc Documents File Box ((hard) 11x16x12” (wxlxh) 560.00 108 3 Pack Sticky Notes 3"x3" 40.00 109 3 Box Staple Wire, No. 35 Standard 26/6 43.00 110 15 Pc Envelope, Brown Long 4.50 111 5 Pc Envelope, Expanded, Long, Assorted Colors 15.00 112 15 Pc Envelope, Brown A4 4.00 113 5 Pc Pencil No. 2 8.50 114 3 Pc Flash Drive 128gb 650.00 115 9 Pc. Clear Book 60 Pockets Legal Size 198.00 116 2 Pc. Clear Book 20 Pockets Legal Size 40.00 117 1 Bundle Ring Binder Comb 12mm 259.89 118 2 Roll Binding Duct Tape 3x25 Meters 240.00 119 1 Bottle Ink Original Epson L1800 (t673) Light Cyan 535.00 120 1 Bottle Ink Original Epson L1800 (t673) Magenta 535.00 121 2 Bottle Ink Original Epson L1800 (t673) Light Magenta 535.00 122 1 Bottle Ink Original Epson L1800 (t673) Black 555.00 123 1 Piece Data File Box/data Filer With Cover Chipboard Material (double Size 285mmx285mmx400mm 506.00 124 1 Piece Desktop Wifi Camera Connect To Cellphone With Voice Mini Wireless 500.00 125 1 Piece Wireless Powerpoint Presenter Clicker And Pointer With Laser Ppt Presentation Remote Control 500.00 126 1 Piece Binder Folder Long With 4 Ring 200.00 127 6 Pack Binder Folder Long With 4 Ring Refill 195.00 128 1 Piece Data File Box/data Filer With Cover Chipboard Material (single Size 5"11x5x16") 506.00 129 3 Pack Specialty Paper 90gsm Long 28.00 130 1 Pack Pvc Binding Cover A4 100 Pcs/pack 250.00 131 2 Bottle Hp Deskjet Gt 51 Black 52.50 132 2 Bottle Hp Deskjet Gt 52 Cyan 52.50 133 2 Bottle Hp Deskjet Gt 52 Magenta 52.50 134 2 Bottle Hp Deskjet Gt 52 Yellow 52.50 135 12 Roll Jrt Tissue Roll Big 2 Ply 10.00 *** Nothing Follows *** Total 120,700.97

Details: Description No Qty Unit Of Issue Item Desciption Stock No. Unit Cost Total Cost 1 1 Pc Bain Marie, Stainless Steel, 6 Pot Warmer Counter 49,500.00 49,500.00 2 1 Pc Blender, Electric 7,000.00 7,000.00 3 10 Pc Board, Chopping/cutting, Plastic 700.00 7,000.00 4 3 Pc Boiler, Double , Stainless Steel 3,500.00 10,500.00 5 8 Pc Braising Pan, Medium 3,500.00 28,000.00 6 3 Pc Can Opener Heavy Duty 800.00 2,400.00 7 10 Pc Casserole, Medium Stainless Steel 3,200.00 32,000.00 8 7 Pc Colander, Medium Stainless Steel 350.00 2,450.00 9 8 Set Cup, Measuring (for Solid) 600.00 4,800.00 10 4 Pc Dispenser, Paper Towel 800.00 3,200.00 11 6 Pc Fan, Electric Stand 4,000.00 24,000.00 12 4 Pc Fire Extinguisher, (with Content) 3,500.00 14,000.00 13 5 Pc Fork Carving Stainless Steel 800.00 4,000.00 14 24 Pc Fork Kitchen Stainless Steel 180.00 4,320.00 15 5 Pc Frying Pan, Large Non Stick 3,800.00 19,000.00 16 5 Pc Frying Pan, Medium Non Stick 3,500.00 17,500.00 17 5 Pc Frying Pan, Small Non Stick 3,200.00 16,000.00 18 4 Pc Funnel, Small Plastic 140.00 560.00 19 4 Pc Garbage Bin Plastic With Cover 4,500.00 18,000.00 20 10 Pc Glass Rack Stainless Steel 4,500.00 45,000.00 21 2 Pc Ice Cream Scooper Stainless Steel 450.00 900.00 22 5 Pc Knife, Boning 490.00 2,450.00 23 10 Pc Knife, Chef 645.00 6,450.00 24 5 Pc Knife Cleaver 800.00 4,000.00 25 3 Pc Light, Emergency 3,500.00 10,500.00 26 1 Pc Meat Slicer 8,500.00 8,500.00 27 10 Set Pastry Tube Stainless Steel 380.00 3,800.00 28 10 Pc Peeler, Y-type 450.00 4,500.00 29 5 Pc Peepper And Salt Mill 450.00 2,250.00 30 10 Pc Piping Bag Plastic 450.00 4,500.00 31 10 Pc Plate Rack Stainless Steel 4,500.00 45,000.00 32 5 Pc Preparation Table With Sink Stainless Steel 19,500.00 97,500.00 33 1 Pc Pressure Cooker 8,000.00 8,000.00 34 4 Pc Roasting Pan 3,800.00 15,200.00 35 8 Pc Scissor, Kitchen 350.00 2,800.00 36 8 Pc Siever, Small Stainless Steel 220.00 1,760.00 37 8 Pc Skimmer, Spider Stainless Steel 350.00 2,800.00 38 8 Pc Skimmer, Fine Stainless Steel 380.00 3,040.00 39 5 Pc Soup Laddle, 12 Oz Stainless Steel 280.00 1,400.00 40 5 Pc Soup Laddle, 3 Oz Stainless Steel 280.00 1,400.00 41 5 Pc Soup Laddle, 6 Oz Stainless Steel 320.00 1,600.00 42 5 Pc Soup Laddle, 8 Oz Stainless Steel 340.00 1,700.00 43 8 Pc Spatula Stainless Steel 220.00 1,760.00 44 24 Pc Spoon, Kitchen Stainless Steel 200.00 4,800.00 45 8 Pc Spoon, Kitchen (slotted) Stainless Steel 280.00 2,240.00 46 10 Pc Spoon, Measuring Plastic 380.00 3,800.00 47 8 Pc Spoon, Parisienne Stainless Steel 180.00 1,440.00 48 24 Pc Spoon, Serving Plastic/stainless Steel 150.00 3,600.00 49 8 Pc Spoon, Wooden 300.00 2,400.00 50 2 Pc Stock Pot, Large 3,500.00 7,000.00 51 3 Pc Strainer Chinios, Small Stainless Steel 450.00 1,350.00 52 2 Pc Strainer Chinios, Medium Stainless Steel 500.00 1,000.00 53 5 Pc Strainer Medium, Fine Plastic 420.00 2,100.00 54 5 Pc Strainer Small, Fine Plastic 380.00 1,900.00 55 5 Pc Tenderizer, Medium 1,800.00 9,000.00 56 3 Pc Thermometer, Pocket/pin 400.00 1,200.00 57 5 Pc Tong, 12 Inches Stainless Steel 480.00 2,400.00 58 5 Pc Tong, 8 Inches Stainless Steel 450.00 2,250.00 59 8 Pc Tray, Baking Small Stainless Steel 400.00 3,200.00 60 8 Pc Tray, Utility Plastic 800.00 6,400.00 61 5 Pc Turner, 3x6 Plastic 350.00 1,750.00 62 1 Pc Utility Cart 6,540.00 6,540.00 63 5 Pc Weighing Scale, 1 Kg, Digital 3,500.00 17,500.00 64 2 Pc Weighing Scale, 5 Kg, Digital 4,500.00 9,000.00 65 5 Pc Wire Skimmer, Small Stainless Steel 300.00 1,500.00 66 10 Pc Wire Whisk, Heavy Duty Stainless Steel 320.00 3,200.00 67 8 Pc Wire Whisk,medium Stainless Steel 290.00 2,320.00 68 5 Pc Wire Whisk Small Stainless Steel 250.00 1,250.00 69 5 Pc Wok, Medium 2,200.00 11,000.00 70 5 Pc Wok, Small 1,800.00 9,000.00 71 2 Pc Working Table 20,026.00 40,052.00 72 5 Pc Zester 550.00 2,750.00

Details: Description Invitation To Bid For 25ka0086 Construction Of Classroom Building Construction At Barangay 9 Elementary School, Barangay 9, Malaybalay City, Bukidnon Barangay 9, Malaybalay City, Bukidnon 1. The Department Of Public Works And Highways – Bukidnon 1st District Engineering Office, Malaybalay City, Through The Gaa 2025 Intends To Apply The Sum Of Php 29,700,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 25ka0086 Construction Of Classroom Building Construction At Barangay 9 Elementary School, Barangay 9, Malaybalay City, Bukidnon Barangay 9, Malaybalay City, Bukidnon. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening 2. The Department Of Public Works And Highways – Bukidnon 1st District Engineering Office, Malaybalay City Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Contract Id : 25ka0086 Contract Name : Construction Of Classroom Building Construction At Barangay 9 Elementary School, Barangay 9, Malaybalay City, Bukidnon Contract Location : Barangay 9, Malaybalay City, Bukidnon Scope Of Work : Construction Of Multi-purpose Building: A.) Structure Excavation Of Footing, Tie Beam And Wall Footing; B.) Fabrication And Installation Of Formworks And False Works; C.) Laying Of Embankment (from Excavation) And Gravel Fill; D.) Construction Of Reinforced Concrete Structures Such As Footing, Wall Footing, Beams, Columns, Lintel Beams And Slab On Grade; E.) Chb Laying And Plastering For Perimeter Walls And Partition Walls; F.) Installation Of Metal Structures (trusses, Purlins, Fascia Frame) With Metal Structure Accessories Such As Steel Plates With Bolts And Sag Rods; G.) Installation Of Rib Type Roofing, Long Span, Above 0.427mm With Flashings; H.) Installation Of Ceiling Works (fiber Cement On Metal Frame); I.) Painting Works Masonry, Woods And All Steel Surfaces; J.) Fabrication And Installation Of Doors With Transom, And Aluminum Windows, And Stainless Steel Railings; K.) Supply Installation Of Finishing Hardware ; L.) Fabrication And Installation Of Cabinetry; M.) Laying Of Floor And Wall Finishes (glazed And Unglazed Tile); N.) Laying Of Pipes For Waste And Sewer Line; O.) Laying Of Pipes And Fittings For Waterline System; P.) Supply And Installation Of Plumbing Fixtures; Q.) Electrical Works; R.) Mechanical Works: Installation Of Oscillating Ceiling Fan, Exhaust Fan (ceiling Cassette), Air-conditioning (split Type), Fire Extinguisher (4.54kg, Abc With Bracket), And Fire Alarm System; S.) Supply And Installation Of Solar Panels; T.) Application Of Soil Poisoning Chemical Prior To Concrete Pouring Of Slab-on Grade, Tie Beam, Wall Footing, Footing And Building Perimeter After Building Is Complete. Complete As Per Approved Pow, Plans, And Specifications. Approved Budget For The Contract (abc) : Php 29,700,000.00 Source Of Fund : Gaa 2025 Contract Duration : 340 C.d. Bid Documents Fee In Php : Php 25,000.00 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D For Small B. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highways – Bukidnon 1st District Engineering Office, Malaybalay City And Inspect The Bidding Documents At Capitol Compound, Malaybalay City During Weekdays From 8:00 Am – 5:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 18, 2024, From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 25,000.00. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Department Of Public Works And Highways – Bukidnon 1st District Engineering Office, Malaybalay City Will Hold A Pre-bid Conference On January 30,2025, 10:00 Am Via Zoom With Meeting Id: 923 1132 1070 And Passcode: Dpwh2024 And The Bidder May View Through Live Streaming (youtube Channel) Dpwh Bukidnon 1st Deo Procurement Ls, Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_bukidnon1@dpwh.gov.ph For Electronic Submission On Or Before February 11, 2025 Until 10:00 Am. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On February 11,2025, 10:00 Am At Conference Room, Dpwh-bukidnon 1st Deo. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Department Of Public Works And Highways – Bukidnon 1st District Engineering Office, Malaybalay City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Rosmendo C. Bongocan, Jr. Engineer Iii Head, Procurement Unit Telefax No. (088) 813-2087 Cellphone No.09178765473 Bongocan.rosmendo_jr@dpwh.gov.ph 14. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.dpwh.gov.ph And Philgeps Website For Online Bid Submission: Electronicbids_bukidnon1@dpwh.gov.ph Approved By: Sarah Jane B. Lagrama Bac Chairperson Date Of Publication: January 18,2025

Details: Description Republika Ng Pilipinas Kagawaran Ng Edukasyon Rehiyon V Tanggapang Pansangay Ng Mga Paaralan Ng Lungsod Naga Bids And Awards Committee Request For Quotation For Goods And Services Date: January 28, 2025 Quotation No. : G2025-01-040 Purchase Request No. : 25-01-018 To: All Eligible Suppliers Please Quote Your Lowest Price Inclusive Of Vat On The Item/s Listed Below, Subject To The Terms & Conditions Of This Request For Quotation (rfq) And Submit Your Quotation Duly Signed By You Or Your Authorized Representative In The Return Envelope Not Later Than The Prescribed Period. Do Not Forget To Write The Quotation No./ Purchase Request (pr) No. In Front Of The Envelope Which You Must Seal, Sign, And Submit To Deped, Naga City Division, Roxas Avenue, Triangulo, City Of Naga. For Any Clarification, You May Contact Us At Cellphone No. 0995-751-0997 Or Email Address At Sdonaga.bac@deped.gov.ph. Fernando C. Macaraig Bac-chairman _____________________________ Signature Over Printed Name Canvasser __ Terms & Conditions A. Submission Of Requirements 1. All Entries In The Rfq Form Must Be Accurate And Legibly Written. The Rfq And Other Requirements Stated Herein Shall Be Submitted In A Sealed Envelope To The Bids & Awards Committee (bac) At Deped Naga City Schools Division Office, Roxas Avenue Triangulo, Naga City. 2. Document Requirements: (suppliers Who Had Contract/s With Deped Naga Previously And Whose Documents Are Still Valid May No Longer Submit These) A. Philgeps Registration B. Dti/sec Registration C. Mayor’s Permit/business Permit D. Tax Clearance Certificate E. Pcab License (for Infrastructure Projects) B. Evaluation Of Quotations 1. Quotation Shall Be Compared And Evaluated Based On The Following Criteria: A. Completeness Of Submission B. Compliance With Technical Specifications C. Price (to Be Denominated In Philippine Peso Shall Include All Taxes, Duties And/or Levies Payable). 2. Quotations Exceeding The Approved Budget For The Contract Shall Be Rejected. 3. In Case Of Two Or More Bidders Are Determined To Have Submitted The Lowest Calculated Quotation/lowest Calculated And Responsive Quotation, The Bac Shall Adopt And Employ “draw Lots” As The Tie-breaking Method To Finally Determine The Single Winning Provider In Accordance With Gppb Circular 06-2005. C. Award 1. The Supplier Who Submitted The Lowest Calculated Responsive Quotation Shall Be Awarded The Purchase Order After Evaluation By The Bac. 2. Prior To Award, An Omnibus Sworn Statement Must Be Submitted By The Supplier. 3. Once Purchase Order Is Awarded, The Photocopy Of Bank Account Number Of The Supplier’s Company Must Be Submitted (preferably Land Bank, If Available) D. Delivery 1. Delivery Of Goods Shall Be Made Within 7 Calendar Days From The Date Of The Receipt Of The Purchase Order. 2. The Item/s Shall Be Delivered According To The Requirements Specified In The Technical Specifications. 3. Deliverables Shall Be Delivered To The Deped Naga City Schools Division, City Of Naga Or Wherever The Project Site Is Defined, Cost To The Account Of Supplier. Risk And Title Pass From The Supplier To The Purchaser Upon Inspection, Receipt And Final Acceptance Of The Goods At Project Site. 4. Upon The Delivery Of Goods To The Project Site, The Supplier Shall Notify The Purchaser And Present The Following Documents: A. Original And 4 Copies Of The Supplier’s Invoice Showing The Goods Description, Quantity, Unit Price And Total Price. B. Original And 4 Copies Of Delivery Receipts C. Original Statement Of Accounts D. Approved Purchase Order E. Warranty Certificate E. Instructions 1. Supplier Shall Be Responsible For The Source(s) Of Its Goods/equipment And Shall Make The Deliveries In Accordance With The Schedule And Specifications Of The Award Or Purchase Order. Failure Of The Supplier To Comply With This Provision Shall Be A Ground For Cancellation Of The Award Or Purchase Order Issued To The Supplier. 2. Supplier Shall Pick-up The Purchase Order Issued In Its Favor Within Three (3) Calendar Days From The Date Of Receipt Of Notice. A Telephone Call, Text Message, Email Or Use Of Messaging App Shall Constitute An Official Notice To The Supplier. Thereafter, If The Purchase Order Remains Unclaimed, The Purchase Shall Be Cancelled. 3. Supplier Who Accepted A Purchase Order But Failed To Deliver The Required Goods Within The Time Called For In The Purchase Order Shall Be Disqualified From Participating In Deped’s Future Procurement Activities. This Is Without Prejudice To The Imposition Of Other Sanctions Prescribed Under Ra 9184 And It’s Irr Against The Supplier. 4. Rejected Deliveries Shall Be Construed As Non-delivery And Shall Be Replaced By The Supplier Subject To Liquidated Damages For Delayed Deliveries. 5. All Duties, Excise Taxes And Revenue Charges Shall Be Paid By The Supplier. 6. All Transactions Are Subject To Withholding Of Creditable Value Added Tax And/or Expanded Value Added Tax Per Revenue Regulation(s) Of The Bureau Of Internal Revenue. 7. All Pages Of The Request For Quotation Shall Be Initialed By The Bidder/supplier To Ensure That Terms And Conditions Were Read And To Protect The Bac From Any Insinuation Of Tampering With The Said Documents. F. Inspection To Confirm Their Conformity To The Technical Specifications All Deliveries By Supplier Shall Be Subject To Inspection And Acceptance By The Deped Inspectorate Team And The End-user. And, All Costs Of The Necessary Laboratory Tests Undertaken By Deped On The Goods Shall Be To The Account Of Suppliers. G. Liquidated Damages A Penalty Of One-tenth Of The Percent (0.001) Of The Total Value Of The Undelivered Goods Shall Be Charged As Liquidated Damages For Every Day Delay Of The Delivery Of The Purchased Goods. In Case The Total Sum Of Liquidated Damages Reaches Ten Percent (10%) Of The Total Contract Price, The Procuring Entity Concerned May Rescind The Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It. H. Warranty Warranty Shall Be For The Period Of Six (6) Months For Supplies And Materials And One Year In Case Of Equipment, Reckoned From Date Of Acceptance Of The Goods At Project Site. I. Payment One Hundred Percent (100%) Of The Contract Price Shall Be Paid To The Supplier After Acceptance Of The Goods At Project Site And Submission Of The Required Supporting Documents Provided Under Letter D. Delivery. The Bids And Awards Committee: After Having Carefully Read And Accepted Your Request For Quotation And Its Terms And Conditions, I/we Quote You On The Item/s At Price Noted In This Rfq. The Quotation Shall Be Binding Upon Us For Thirty (30) Calendar Days Reckoned From The Last Day Of Submission Indicated In The Submission Requirement. The Corresponding Award Or Purchase Order Shall Be Accepted By Us Within 3 Days From Notification By Deped Naga Bac. Approved Budget Of The Contract For This Project: P 59,980.00 Item No. Item Description Qty Unit Estimated Unit Price State Comply Or Not Comply Unit Price Total Price Procurement Of Office Table For Hr Office Allotment Availability: Osec-5-24-4673 1. Wooden Office Table With Glass Top Pad And Drawers With Lock 4 Units 14,995.00 Measurement: 28” (length) X 40” (width) X 30” (height) (please See Attached Sample Photo With Measurements) Note: Any Interlineations, Alteration/ Erasures Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By You Or Any Of Your Duly Authorized Representative/s. Supplier’s Company Name: _________________________________________________________________________________________ Philgeps Registration Number: _______________________________________________ Tin ______________________________ Address: ____________________________________________________________________________________________________________ Telephone/cellphone Number: __________________________ Email: _______________________________________________ Supplier Or Authorized Representative: _________________________________________________________________________ Signature Over Printed Name: _________________________________________________ Date: _____________________________ Note: A Special Power Of Attorney Is Required For The Authorized Representative *************

Details: The subject of this order is the supply of an automated painting line that will be used for painting wooden and wood-aluminum hole fillings. Detailed Technical Specifications are given in Appendix No. 1 of this Challenge. The Inspection of the Fulfillment Place will take place at the Fulfillment Place (fmt, Spol. Sro, Cihelní 238, 747 74 Neplachovice) on 6 December 2024 and 11 December 2024, Meeting at the Entrance to the Main Administrative Building Always at 10:00 AM. Bids are submitted in written form (see Invitation). Contact Person For This Selection Procedure: Lenka Matýsková, Dis., Phone +420 553 662 366, E-mail: Info@fm-t.eu. This tender procedure is conducted according to the rules for the selection of suppliers in Op Tak, it is not a tender procedure according to Act No. 134/2016 Coll. About the Awarding of Public Contracts.

Details: The Subject of the Public Contract is the Conclusion of a Contract for the Work of Felling Trees Along Class II and III Roads in the Moravian-Silesian Region, Which Are Administered by the Bruntál Center. In Total, This Is Felling 24 Pieces of Trees with the Place of Fulfillment in the Land Registry Office Bílčice (Road II/452), Land Registry Office Janovice U Rýmařova (Road III/37010) – All According to the Specifications Set Out in Annex No. 3 of This Tender Documentation – The Contracting Authority Requires Complete Completion of This Annex. The Subject of the Contract Is the Disposal (Including Removal and Possible Landfilling – I.e. Landfill Fees Are Also Included in the Price) of the Removed Vegetation and Milling of Stumps After Felling (5 Cm Below Surface Level and Covered with Soil). The Felling Site Will Be Cleaned And Tidyed By The Contractor. The Bid Price Will Also Include The Costs Of All Equipment Used In The Implementation Of Felling And Trimming Of Trees. The Implementation Time Is Dependent On The Vegetation Rest Period (i.e. Until March 31st And Subsequently From November 1st, 2025). The Contracting Authority Expects The Felling Of Trees To Be Implemented Immediately After The Completion Of The Tender Procedure And The Conclusion Of The Contract, Priorities Will Be Determined By The Authorized Employee Of The Ostrava Center. The Implementation is Expected to Be Completed by March 31, 2025; If This Does Not Happen, the Contracting Authority Requests that the Implementation Begin Again on November 1, 2025. Within the Scope of the Public Procurement, the Bidder's Offer for the Purchase of Logged Wood (Coniferous and Deciduous Wood) Will Also Be Evaluated. The Contracting Authority Sets the Minimum Price for the Purchase of: • Softwood in the Amount of CZK 560 Excl. VAT/m3, • Medium-Hard and Hardwood in the Amount of CZK 800 Excl. VAT/m3. This Bid Price Is Binding for the Entire Period of Performance. The Evaluation Criteria Are Set Out in Detail in Part Xi. of This Tender Documentation.

Details: Description Item Quantity Unit Articles Estimated Price Unit Price 1 40 Pairs Adhesive Pads. Adhesive Pad A. Size : 2x2 Inch B. For Tens/es C. 40 Pieces Or 20 Pairs 445.00 2 1 Pieces Agility Ladder. A.at Least 5m / 10 Rung B.any Color 705.00 3 1 Set Ankle Weights. A.1 Set Ankle Weight ( Contains: 1 Pound, 2lbs, 3lbs,4lbs And 5 Lbs) B. With Velcro Strap On C. In Pairs Per Ankle Weight D. Any Color 5,880.00 4 1 Pieces Bathroom Weighing Scale. A. Weighing Scale Body Recommended For Adult At Least Up To 120 130kg B. Analog Type C. With Anti Skid Rubber Surface D. Color: Any E. The Scale Has Zero Adjuster Screw 882.00 5 3 Set Bp App Manual (adult) A. Manual Sphygmomanometer B. Has Its Own Carry Bag C. Cuff Size For Adult ( At Least 25.4 To 40.6 Cm) D. Consist Of Inflatable Cuff, Measuring Unit (aneroid Gauge), Bulb And Valve And Pump Operated Manually E. Includes Stethoscope 850.00 6 8 Pairs Carbon Rubber Pad A. Carbon Rubber Pads For Tens/es ( Reusable) In Pair B. Silicone Type C. Size: At Least 4cm X 8xm ( Rectangular Type) 375.00 7 6 Pieces Cold Packs A. Wearable Gel Pack Type ( Reusable Hot And Cold Compress) B. Size : Large C. With Strap Inclusion 895.00 8 1 Roll Cotton A. Roll B.biggest Size Or At Least 500gm 1,500.00 9 1 Pieces Digital Forehead Thermometer. A. Digital Infrared Forehead Thermometer Electronic Contactless B. Non-contact Body Temperature Meter Fever For Adult Or Child D. Celsius Or Fahrenheit Reading Package Contains: A)1 Unit Infrared Thermometer B) Manual Booklet 1,350.00 10 20 Box Disposable Face Mask.a. Disposable B. 1 Box = 50's C. For Adult 100.00 11 10 Box Disposable Gloves. A. Disposable Gloves B. Nitrile Gloves Powder Free C. Size: Medium 250.00 12 4 Pieces Elastic Bandage. A.sixe: 2 Inch B. Elastic Homey Comb Velcro Type 50.00 13 1 Bottle Face Loose Powder. A. Classic Baby Powder ( Unscented) B. Size: 500gm 350.00 14 2 Pieces Foot Stool. A. Non-slip Corrugated Rubber Step Treads B. Non-tip Offset Stool Legs Standard Size With Non Slip Rubber Tips C. Single Foot Step D.dimensions: 14.25" L X 9" H X 11.25" W E. Stainless Steel F. Weight Capacity: At Least 350 Lbs 1,800.00 15 2 Pieces Gait Belt. A. Material: Nylon B. Size: 71 In C. Metal Buckle Type 740.00 16 1 Pieces Hand Therapy Squeeze Ball. A.size:at Least 7cm/ 2.76in B. Color: Blue C. Material: Elastic Pu + Adhesive Tape D. Type : Finger Grip Ball 200.00 17 40 Pack Interfolded Paper Towel Tissue. A. 1 Pack =175 Pulls 82.00 18 3 Galloon Isopropyl Alcohol 70%. A. 70 % Isopropyl Alcohol B. Size: 1 Gallon 700.00 19 3 Bottle Isopropyl Alcohol 70%. (500ml) A. 70% Isopropyl Alcohol B. Size: 500 Ml ( Bottle) 130.00 20 2 Bottle Lotion. A. Hypoallergenic Body Lotion B. If Possible Mild Scent Or Unscented C. Size: At Least 400ml -500ml Bottle 300.00 21 3 Pieces Neurological Hammer. Buck Hammer Features Dual Rubber Heads For Reflex Testing And Includes A Removable Needle And Brush. 295.00 22 4 Pieces Paraffin Wax. A. Paraffin Wax For Hand And Foot Treatment ( Therapeutic ) B. Size: At Least 400 500gm C. Color: White Or Red 600.00 23 1 Pieces Pulse Oximeter A.led Display:dual Color Led Display. B. Multi-direction Display:rotatable Multidirectional Display. 4 Directions, 6 Modes, Allow You To View Your Results In Any Direction. C. Fingertip Pulse Oximeter 588.00 24 2 Pieces Rechargeable 9v Battery. A. Rechargeable Battery B. 9v Ni-mh Battery C. 2.250mah D. Dimension - 13.5*10*2.5cm 1,255.00 25 2 Set Rechargeable Aa Battery. A. 2 Pieces Of Aa Batteries B. Rechargeable Nimh C. Charges Up To 1,000 Times D. 1.2 V, 1300mah 2,215.00 26 1 Unit Rechargeable Battery Charger A. Compatible Rechargeable Batteries Are Aaa, Aa, And 9v .b. Automatic Charger C. Can Charge 4 ( Aa Or Aaa) Batteries At Once 1,235.00 27 1 Unit Refrigerator A. Single Door B. Inverter C. Upright Freezer D. 8 Cu Ft. E. Net Weight: 44 Kg F. Dimension: 545 X 695 X 1,459 Mm 30,000.00 28 2 Pieces Stethoscope. A. Littmann Classic Iii Stethoscope ( Adult And Pedia) B.colors: Navy Blue Tube And Raspberry Tube 9,400.00 29 2 Pieces Tape Measure ( Linen) A.linen Tape Measure In Cm And Inches B.at Least 60 Inches Long 25.00 30 1 Box Tongue Depressor. A. Sterile Wooden Tongue Depressor B. Individually Packed C. At Least 3/4 X 6 Inches In Dimension 215.00 31 1 Box Transpore. A. 12 Rolls/box B. Size: 1 Inch 800.00 32 2 Galloon Ultrasound Gel (1 Gallon) A. Ultrasound Gel- Water Soluble, Hypoallergenic, Odourless Water-based Viscous Gel. B. 5l 1,345.00 33 3 Bottle Ultrasound Gel (250ml) A. Ultrasound Gel- Water Soluble, Hypoallergenic, Odourless Water-based Viscous Gel. B. Bottle: 250ml 145.00 34 1 Roll Uniband Exercise Band ( Black) A. Height: 5.8" B. 1 Roll : At Least 10 Meters 8,000.00 35 1 Roll Uniband Exercise Band ( Blue) A. Height: 5.8" B. 1 Roll : At Least 10 Meters 8,000.00 36 1 Roll Uniband Exercise Band ( Green) A. Height: 5.8" B. 1 Roll : At Least 10 Meters 8,000.00 37 1 Roll Uniband Exercise Band ( Red) A. Height: 5.8" B. 1 Roll : At Least 10 Meters 8,000.00 38 3 Pieces Uniband Exercise Band ( Yellow) A.length: 2 Meters Per Piece; Height: 5.8" B. Color: Yellow 500.00

Details: Description Common Office Supplies Book Paper, Extra Long, Substance 20 (8.5x14in) 10 Reams 3,150.00 Book Paper, Long, Substance 20 (8.5x13in) 10 Reams 2,840.00 Book Paper, Short Substance 20 10 Reams 2,630.00 Book Paper, A4, Substance 20 40 Reams 10,920.00 Sign Pen, Black, 0.5 (needle Tip) 24 Piece 1,272.00 Sign Pen, Blue, 0.5 (needle Tip) 36 Piece 1,908.00 Sign Pen, Red, 0.5 (needle Tip) 12 Pieces 636.00 Highlighter Pen; Pink And Neon Green 6 Pieces 252.00 Transparent Tape, 1inch(24mm), 50 Meters Length 3 Pieces 78.00 Transparent Tape 2 Inch(48mm), 50 Meters Length 3 Pieces 159.00 Masking Tape, 1 Inch(24mm), 50 Meters Length 3 Pieces 159.00 Masking Tape, 2 Inch(48mm), 50 Meters Length 6 Pieces 318.00 Scissors (medium Size; Multifunctional Scissors; 7inches) 7 Pieces 1,470.00 Correction Tape 10 Pads 320.00 Sticky Notes, 3"x3" 21 Pads 1,323.00 Sticky Notes, 3x0.75inches (4 Colors) 10 Pads 630.00 Desktop Calculator, 2-way Power, 12 Digits 2 Pieces 526.00 Big Calculator (207.5mmdx159mmwx34.3mmh) 2 Pieces 1,440.00 Stapler No. 35 With Staple Wire Remover 3 Boxes 1,161.00 Stapler No. 35 3 Boxes 189.00 Stapler Long Arm Full (wxhxl) 15.14in X 1.12in X 2.3in 1 Piece 500.00 Cutter, Heavy Duty With Extra Blades 5 Pieces 315.00 Tissue Paper In A Box (pull-up) 17 Rolls 595.00 Tissue Paper (12 Rolls/pack) (150 Pulls) 6 Packs 822.00 Whiteboard Marker 7 Boxes 294.00 Permanent Marker (black/broad) 10 Boxes 580.00 Sticker Paper (20 Sheets/pack) A4 Size 5 Packs 420.00 Glossy Photo Paper (20 Sheets/pack) A4 Size 10 Packs 1,100.00 Expanding Envelope, 10x15inches 80 Pieces 2,080.00 Pressboard Expanding Folder, 9.5x14.5 Inches 85 Pieces 2,210.00 Sign Here Sticky Note (arrow Index Note, 10 Color) 5 Pads 240.00 Black Nylon Cable Tie, (100 Per Pack) 4x200mm 2 Packs 100.00 Velcro Cable Tie, 5m 1 Rolls 115.00 Whiteboard, 4x6ft 1 Pieces 4,285.00 Whiteboard Eraser L, 5x135x30mm 2 Pieces 90.00 Short Plastic Fastener, 50sets/box 1 Box 100.00 Binder Clip 1" 5 Boxes 500.00 Stainless Ruler (12 Inches) 10 Pieces 530.00 39 Vellum, A4 (10pcs/pack) 20 Packs 700.00 40 Double Sided Tape 2" 10 Pieces 530.00 41 Long Folder (brown) 30 Pieces 210.00 42 Long Envelope (brown) 40 Pieces 200.00 43 Paper Clip (big) 5 Boxes 210.00 44 Paper Clip (medium) 5 Boxes 160.00 45 Paper Clip (small) 5 Boxes 80.00 46 Alcohol, Ethyl 70% (1 L) 20 Bottles 2,100.00 47 Alcohol Ethyl 70% 4 Gallon 2,856.00 48 Extension Wire, 10meters, 4 Outlet 3 Pieces 900.00 49 Pencil No.2 20 Pieces 220.00 50 Glue (130g, All-purpose) 15 Pieces 750.00 51 Ballpen (black) 230 Pieces 4,830.00 52 Ballpen (red) 30 Pieces 630.00 53 Ballpen (blue) 30 Pieces 630.00 54 Insect Repellant (500ml) 2 Pieces 1,360.00 55 Disinfectant (500ml) 3 Pieces 1,050.00 56 White Board With Stand 60*90cm Double Sided 1 Piece 2,550.00 57 Notebook (80 Leaves) 10 Pieces 350.00 58 Manila Paper 5 Pieces 75.00 59 Colored Pen 1 Box 100.00 60 Certified True Copy Rubber Stamp 9mmx36mm 1 Piece 250.00 61 Battery Aa (4pcs/pack) 5 Packs 735.00 62 Plastic Envelope (long) 20 Piece 320.00 63 Storage Kraft Box 12'wx10'hx15'l 100 Pieces 15,800.00 64 Packaging Tape, 48mm, 50 Meters Length (brown) 5 Rolls 370.00 65 "packaging Tape, 48mm, 50 Meters Length (transparent) " 10 Rolls 840.00 66 Paper Trimmer Wooden 18x15in 1 Piece 2,800.00 Xx-xx-xx-xx-xx-xx-xx-xx-xx-xx-xx-xx-xx-xx-xx-xx-xx Grand Total 87,863.00 General Conditions: 1. All Entries Must Be Typewritten And Legible; 2. Bidders Must Submit Certificate Of Philgeps Registration; 3. Bidders Must Submit Necessary Business Permits (sec; Lgu; Dti; Cda, Etc.); 4. Place This Rfq In A Sealed Envelope And Type The Following Details On The Face Of The Envelope: * Your Company Name * Pr No. * Rfq No. * Philgeps Reference No. 5. Delivery Period Must Be At Least Within Seven (7) Calendar Days Upon Receipt Of The Notice Of Award/ Purchase Order (indicate Days Of Delivery In The Bidder’s Certification Box); 6. Item/s Delivered Must Have Warranties For Unit Replacements, Parts, Labor Or Other Services; 7. Price Validity Shall Be For A Period Of Three (3) Months; 8. Quoted Prices Must Be Inclusive Of Taxes, And Other Charges Or Fees And Shall Not Exceed The Approved Budget For The Contract (abc); 9. Transactions With Bfar Shall Mean Compliance By The Winning Bidder With The Bid And Delivery Requirements Before The Issuance Of Check Payment; 10. Failure To Comply With These Conditions Shall Mean Disqualification Of Your Bid Proposal. 11. Terms Of Payment: At Least Thirty (30) Days Upon Effectivity Of Purchase Order.

Details: Description Construction Of Warehouse Building Item Description Unit Qty. Unit Cost Amount Part I General Requirements B.5 Project Billboard/sign Board Ea 1.00 B.7 (2) Occupational Safety And Health Program Ls 1.00 B.9 Mobilization & Demobilization Ls 1.00 Continuation Of Warehouse Building Part Ii Civil Works 1 Part A Earthworks 803(1)b Structure Excavation (soft Rock) M3 4.56 804(1)b Embankment From Common Borrow By Equipment M3 27.01 804(4) Gravel Bedding (bldg. 1) M3 0.39 Part B Plain & Reinforced Concrete Works 900(1)c2 Structural Concrete For Footings And Slab On Fill (class A, 28 Days) M3 7.32 900(1)c4 Structural Concrete For Columns, (class A, 28 Days) M3 1.10 900(1)c6 Structural Concrete For Beams/girders, (class A, 28 Days) M3 1.32 902(1)a Reinforcing Steel Of Reinforced Concrete Structures Kg 1,140.74 903(1) Formworks And Falseworks (for One-storey Building) M2 15.18 Part C Finishing And Other Civil Works C.1 Masonry Works 1046(2)a1 100mm Chb Non-load Bearing (including Reinforcing Steel) M2 60.96 1046(2)a2 150mm Chb Non-load Bearing (including Reinforcing Steel) M2 3.00 1027(1) Cement Plaster Finish M2 121.92 Spl Decorative Blocks ( 250mm X 250mm ) Ls 1.00 C.2 Roof Framing And Roofing Works 1014(1) Prepainted Metal Sheets (rib Type, 0.40mm Thk) M2 70.00 1047(2)b Structural Steel Roof Truss Kg 292.51 1047(2)c Structural Steel Purlins Kg 262.72 1047(3)a Metal Structure Accessories (anchor Bolts) Pc 8.00 1047(3)b Metal Structure Accessories (sagrods) Pc 16.00 1047(5) Metal Structure Accessories (steel Plates) Kg 9.04 1047(2)a Structural Steel Roof Framing Kg 91.92 1013(2)a1.a Plain Metal Sheets (ridge Roll) M 7.00 1013(2)c Fabricated Metal Roofing Accessory (gutter) M 22.00 1013(2)a3 Fabricated Metal Roofing Accessory ( Flashing) M 22.00 C.3 Fabricated Materials 1010(2)b Wooden Panel Door M2 4.20 C.4 Painting Works 1032(1)b Painting Works (masonry Painting) M2 221.92 1032(1)c Painting Works (metal Painting) M2 51.92 C.5 Finishing Works 1003(1) 4.5mm Fiber Cement Board On Metal Frame Ceiling M2 160.00 1018(1) Glazed Tiles And Trims M2 48.00 Completion Of Equipment Garage Building 1 And 2 Part Iii Civil Works 2 Part A Concrete Works (bldg. 2) 900(1)c4 Structural Concrete For Columns, (class A, 28 Days) M3 1.82 903(1) Formworks And Falseworks (for One-storey Building) M2 77.80 Part B Roofing Works(bldg. 2) 1013(2)a1 Fabricated Metal Roofing Accessory (ridge Roll) M 3.10 1013(2)a3 Fabricated Metal Roofing Accessory (flashing) M 27.08 1014(1) Prepainted Metal Sheets (rib Type, 0.40mm Thk) M2 41.79 1047(2)a Structural Steel Roof Framing (fascia Frame) Kg 969.31 1047(2)b Structural Steel Roof Truss And Steel Strut Beam Kg 890.96 1047(2)c Structural Steel Purlins Kg 230.88 1047(3)a Metal Structural Accessories, Anchor Bolts 12mmø Pc 16.00 1047(3)b Metal Structure Accessories (sagrods) Pc 18.00 1047(4) Metal Structure Accessories (crossbracing) Kg 31.98 1047(5) Metal Structure Accessories (steel Plates) Kg 104.02 Part C Finishing Works (bldg 1 & 2) 1027(1) Cement Plaster Finish M2 18.24 1032(1)a Painting Works (masonry Painting) M2 259.20 1032(1)b Painting Works (metal Painting) M2 84.37 Total Invitation To Bid The City Government Of Pagadian, Through Its Bids And Awards Committee (bac), Invites Contractors Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) To Apply For Eligibility And If Found Eligible, To Bid For The Hereunder Contract: Contract Reference No. Infra-2025-03-12 Name Of Contract: Construction Of Warehouse Building At Bagong Silang , Brgy. Balangasan , Pagadian City 2saip24-8000rf-2a7 Approved Budget For The Contract -p 1,463,041.29 Completion Of Work -120 Calendar Days Prospective Bidders Should Possess A Valid Pcab License Applicable To The Contract, Have Completed A Similar Contract With A Value Of At Least 50% Of The Abc, And Have Key Personnel And Equipment (listed In The Eligibility Forms) Available For The Prosecution Of The Contract. The Bac Will Use Non-discretionary Pass/fail Criteria In The Eligibility Check/screening As Well As The Preliminary Examination Of Bids. The Bac Will Conduct Post-qualification Of The Lowest Calculated Bid. All Particulars Relative To The Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a.9184 And Its Implementing Rules And Regulations (irr). Below Is The Schedule Of Procurement Activities: Activity Date 1-advertisement/posting Of Invitation To Bid February 26, 2025 To March 5, 2025 2-issuance And Availability Of Bidding Documents February 26, 2025 To March 12, 2025 3-pre-bid Conference February 28, 2025 4- Submission And Receipt Of Bids /bid Opening March 12, 2025 The Bac Will Issue To Prospective Qualified Bidders, Bidding Documents At The Bac Secretariat, Office Of The City Planning And Development Coordinator, Pagadian City, Upon Payment Of A Non-refundable Amount Of (p 1,500.00) To The Office Of The City Treasurer-cashier. Prospective Bidders Shall Submit Their Duly Filled-up Bidding Documents On The Scheduled Date For The Submission And Receipt Of Bids /bid Opening To The Bac, Pagadian City. The City Government Of Pagadian Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Ms. Jenny Rose Z. Egama City General Services Officer Bac Chairman Date Posted: February 26, 2025 To March 5, 2025