Wood Tenders

Purchaser Name: Forest And Wood NRW | To the tender 'traffic safety cut along the forest development boundary in the LVR Himmelpforten in the Arnsberg Forest Regional Forestry Office'

Description: Public tender VOB/A Installation of a PV system approx. 240 kWp The magistrate of the city of Fulda has completed the new construction of the vehicle hall including the operational building and is now planning to install a photovoltaic system on it. B ... Multiple installation of a PV system approx. 240 kWp The magistrate of the city of Fulda has completed the new construction of the vehicle hall including the operational building and is now planning to install a photovoltaic system on it. The building is a functional building in the form of an angle structure with a central operational building and garages adjoining it to the left and right. The roof structure consists of glued beams with a foil roof. The operational building was built using a combined solid and wooden construction. The outer walls of the entire building complex were made with a wooden facade. A photovoltaic system with an output of currently 244.75 kWp and an east-west orientation is planned on the roof of the operational building. The voltage supply comes from the Nshv on the ground floor from a separate photovoltaic transfer field. The required protection technology and all other requirements must be coordinated with the grid operator. All necessary approvals must be obtained from the grid operator and the corresponding registrations must be made. Modules with an output of 445 Wp are used for the PV system. According to the model administrative regulation for technical building regulations 2020/1, modules with a maximum area of 2 m² must be used on roofs. The inverters are to be placed on the roof as currently known. Fire protection requirements and the existing fire walls must be taken into account. Requirements for a fire department shutdown must be coordinated with the responsible fire department. The PV system must be installed in accordance with DIN VDE 4110. AC cabling From the inverter to the sub-distribution for collecting the electrical energy, the cabling is carried out in accordance with VDE 0276 Part 603. Cables are used which are suitable for laying outdoors, i.e. they are ozone, UV and weather resistant. The cables are laid on routes and in the building or underground. The cables are laid to the inverter in cable routes/ladders made of dip-galvanized steel in accordance with EN ISO 1461 and are mounted on the substructure. Appropriate cable support must be ensured. The cables are to be laid in accordance with the circuit assignment so that, in addition to the electromagnetic effect, there is also a clear assignment of the cables. The cables in the area of the cable routes and KSV rails are to be secured accordingly using KSV clamps. Surge protection must be implemented at the building entrances in accordance with DIN VDE 0100-442/-534. Information Field 05 in the NSHV is used to feed in the PV system. The NA protection is installed here, as well as the necessary circuit breakers including all other components. The Q protection and the necessary UPS (8h) are housed in a separate switch cabinet in the NSHV. The current and voltage tap for the higher-level decoupling protection is in the medium voltage, which trips the grid-facing circuit breaker in the NSHV in the event of a fault. The voltage and current transformers in the medium voltage are to be replaced with 3-core transformers in the customer's own transfer station and the higher-level decoupling protection including accessories are to be retrofitted. The transformers must be agreed with the grid operator before installation and conformity must be confirmed. A distributor is provided for the EZA controller in the NSHV room. The higher-level decoupling protection sends the signal via a data cable to the EZA controller in the NSHV room. Furthermore, a meter cabinet is set up here as required, in which the transformer measurement of the photovoltaic system is set up. The transformer set is provided by the metering point operator and must be agreed with the responsible grid operator before installation. System certification is no longer required for the system due to the change in the law from May 8, 2024. Nevertheless, all necessary and relevant documents in accordance with VDE-AR-N 4110 must still be compiled and presented to the grid operator for inspection. This must be done by the AN-PV. The feed-in management and control of the system is carried out by the EZA controller. Data point lists must be exchanged and agreed between the grid operator, direct marketer and AN-PV. The connection to the grid operator is made via the EZA controller.

Purchaser Name: Forest And Wood NRW | On the tender 'Framework agreement on the implementation of timber harvesting work in the Dalheim forestry district of the Hochstift regional forestry office of the North Rhine-Westphalia state forest and timber company'

Purchaser Name: Forest And Wood NRW | In the Ebbetal Forestry District of the Regional Forestry Office Kurkölnische Sauerland

Purchaser Name: Forest And Wood NRW | On the tender 'Framework agreement on the implementation of motor-manual timber harvesting (lot 1) and timber transport (lot 2) in the Karlsbrunn forestry district of the Hochstift regional forestry office of the North Rhine-Westphalia state forest and timber company'

Purchaser Name: Forest And Wood NRW | To the tender 'Framework agreement on the supply of meat and sausage products for the supply of the kitchens in the Center for Forestry and Timber Industry at two locations in Arnsberg'

Details: Description 1. Portland Cement - 244.00 Bags 2. Screened Sand - 12.50 Cu.m. 3. Peasize Aggregates - 9.50 Cu.m. 4. 10mm Ø Def. Bar - 98.00 Lgths. 5. No. 16 Tie Wire - 5.00 Kgs. 6. Chb 4" - 650.00 Pcs. 7. Double Furring - 50.00 Pcs. 8. Wall Angle - 24.00 Pcs. 9. Blind Rivets 1/8" X 3/4" - 4.00 Boxes 10. 8mm X 250mm X 2900mm Pvc Ceiling Panel - 80.00 Lgths. 11. Pvc H - Clip X 2.40m - 12.00 Lgths. 12. Pvc J - Moulding X 2.40m Divider - 26.00 Lgths. 13. Marine Plywood 1/4" - Local M - 14.00 Shts. 14. Metal Drill Bit 1/8" - 10.00 Pcs. 15. Pre - Fabricated Wooden Panel Door - 1.0m X 2.10m - 4.00 Pcs. 16. Pre - Fabricated Wooden Panel Door - 0.90m X 2.10m - 4.00 Pcs. 17. Pre Fabricated Wooden Panel Door - 0.90m X 2.10m - 4.00 Pcs. 18. 3" X 4' Loose Pins Hinges - 16.00 Prs. 19. 3" X 3" Loose Pins Hinges - 6.00 Prs. 20. Door Knob - 12.00 Pcs. 21. 60 - 2" X 3" X 10' Coco Lumber - 300.00 Bd.ft. 22. 60 - 2" X 2" X 10' Coco Lumber - 200.00 Bd.ft. 23. Cwn 4" - 5.00 Kgs. 24. Cwn 3" - 5.00 Kgs. 25. Chb 1 1/2" - 3.00 Kgs. 26. Floor Tiles 0.40m X 0.40m - 320.00 Pcs. 27. Tile Grout - 4.00 Bags 28. Wall Tiles 0.40m X 0.40m - 900.00 Pcs. 29. Granite Slab 0.60m X 2.40m - 3.00 Pcs. 30. 20mm Ø Upvc Blue Pipe - 30.00 Lgths. 31. 20mm Ø Upvc Coupling - 20.00 Pcs. 32. 20mm Ø Upvc Plain Elbow - 50.00 Pcs. 33. 20mm Ø Upvc Plain Tee - 15.00 Pcs. 34. 20mm Ø Upvc Female Adaptor - 30.00 Pcs. 35. 20mm Upvc Male Plug - 25.00 Pcs. 36. 4" Ø Sanitary Pipe S - 1000 - 10.00 Lgths. 37. 4" Ø Sanitary Elbow Bend 45 - 6.00 Pcs. 38. 4" Ø Sanitary Tee - 8.00 Pcs. 39. 4" Ø Sanitary Wye - 3.00 Pcs. 40. 4" Ø Sanitary Clean Out W/ Adaptor - 7.00 Pcs. 41. 4" Ø Sanitary Coupling - 4.00 Pcs. 42. 4" Ø X 2" Ø Sanitary Tee Reducer - 2.00 Pcs. 43. 3" Ø Sanitary Pipe S - 1000 - 20.00 Lgths. 44. 3" Ø Sanitary Coupling - 4.00 Pcs. 45. 3" Ø Sanitary Elbow Bend 45 - 4.00 Pcs. 46. 3" Ø Sanitary Clean Out W/ Adaptor - 4.00 Pcs. 47. 3" Sanitary Tee - 2.00 Pcs. 48. 3" Ø X 2" Ø Sanitary Tee Reducer - 8.00 Pcs. 49. 2" 6 Sanitary Pipe S - 1000 - 12.00 Lgths. 50. 2" Ø Sanitary Coupling - 4.00 Pcs. 51. 2" Ø Sanitary Elbow Bend 45 - 2.00 Pcs. 52. 2" Ø Sanitary Clean Out W/ Adaptor - 2.00 Pcs. 53. 2" Ø Sanitary Tee - 10.00 Pcs. 54. 2" Ø Sanitary Elbow Bend 90 - 12.00 Pcs. 55. 2" 6 Sanitary P - Trap - 5.00 Pcs. 56. 2" Ø X 3/4" Ø Sanitary Bushing Reducer - 5.00 Pcs. 57. 20mm Ø Stainless Single Angle Valve - 10.00 Pcs. 58. 20mm Ø Stainless Double Angle Valve - 6.00 Pcs. 59. 20mm Ø Stainless Faucet - 4.00 Pcs. 60. 20mm Ø Stainless Goose Neck Faucet - 5.00 Pcs. 61. 20mm Ø Lavatory Supply Hose - 5.00 Pcs. 62. 20mm Ø Urinal Supply Hose - 4.00 Pcs. 63. 20mm Ø Water Closet Supply Hose - 6.00 Pcs. 64. Teflon Tape 3/4" - 20.00 Rolls 65. Solvent Cement - 5.00 Ltrs. 66. 4" X 4" Stainless Floor Drain - 9.00 Pcs. 67. 20mm Ø Stainless Bidet - 6.00 Pcs. 68. Men's Urinal With Accessories - 4.00 Sets 69. Flushed Type Water Closet With Accessories - 6.00 Set 70. Ceramic Lavatory - 5.00 Sets 71. Thhn Stranded Wire # 10 - 1.00 Box 72. Thhn Stranded Wire # 12 - 1.00 Box 73. 3/4" Ø Flexible Ose - 1.00 Gang 74. Flush Type Switch 3 - Gang - 2.00 Pcs. 75. Flush Type Switch 1 - Gang - 6.00 Pcs. 76. Full Pvc Box 4 X 4 X 2 - 2.00 Pcs. 77. Junction Box - 4.00 Pcs. 78. Utility Box - 20.00 Pcs. 79. Convenience Outlet 3 - Gang Flush Type - 2.00 Pcs. 80. Flush Type Downlight 9w Tri Color - 20.00 Pcs. 81. Solvent Paint - White Primer - 2.00 82. Solvent Paint - Flat White - 2.00 Gals. 83. Latex Primer White - 20.00 Gals. 84. Latex Semi Gloss White - 50.00 Gals. 85. Roof Cement - 8.00 Gals. 86. Sand Paper # 120 - 6.00 Ft. 87. Baby Roller # 7 With Handle - 12.00 Pcs. 88. Plastic Paint Basin - 8.00 Pcs. 89. Plastic Basin - 8.00 Pcs. 90. Masking Tape 1" - 10.00 Rolls 91. One Way Mirror 1.0m X 0.80m - 5.00 Shts. (including Installation) Note: Opening Of Bids Will Be On February 19, 2025 @ 1:30 Pm

Description: Restricted invitation to tender with public participation competition Vob/a solid construction work 1. The construction project involves the new extension of the fire station with 4 vehicle parking spaces and the necessary social rooms. The existing building will be partially demolished and ... More1. The construction project involves the new extension of the fire station with 4 vehicle parking spaces and the necessary social rooms. The existing building will be partially demolished and rebuilt. For the vehicle hall, the additional base including foundations and upstands will be built using solid construction. The social wing on the ground floor and the building dividing wall to the hall will be newly built using solid construction. The upper floor of the social wing and the roof and walls of the vehicle hall will be made of wood. The "sports center" part of the existing building will be retained and in use during the construction period. Fire brigade access roads, the access to the building yard (fire brigade location during construction) and escape and rescue routes must be kept clear throughout the entire construction phase, see appendix. Everything else must be agreed upon with the construction management, particularly exceptions. 2. During the project, some work may be carried out by building yard employees and fire brigade members on their own. This may result in various items being eliminated altogether or quantities in parts of various items being reduced. The elimination or reduction in quantities of these items does not entitle the contractor to make claims for lost profits or claims for an increase in unit prices. The price request and required items must be filled out without fail, as it is possible that these items will also be implemented. The bidder acknowledges these preliminary remarks by signing the list of services. 3. The construction site toilet and break rooms must be provided by each contractor themselves. Energy, water and electricity are provided free of charge. 4.The following additional services are covered by the unit prices: - Participation in construction meetings by an authorized person; if necessary - Documentation services in accordance with the general terms and conditions of the contract - Participation in expert acceptances, if necessary 5.When accepting the order, the contractor recognizes the dates stated in the preliminary remarks and the construction schedule as binding and will, if necessary, also carry out necessary work outside of working hours at no extra cost in order not to jeopardize the deadlines for subsequent work. He undertakes to keep the number of workers available accordingly according to the amount of work and working days. 6.The contractually binding partial deadlines are set out in the attached construction schedule. 7.The work advertised must be carried out in partial services in accordance with the construction progress. This does not give the contractor any right to assert additional claims. 8. Garbage and rubble disposal must be carried out every 2 days at most, in the same way as the work steps. Each contractor is responsible for this himself. 9. All other details can be found in the list of services. 10. Contrary to DIN 1961 Vob Part B § 13 (4), the limitation period for claims for defects is set at 5 years. 11. Services that exceed the contract amount require prior written approval - otherwise no payment will be made! Accordingly, supplementary offers must be approved in good time (at least 3 weeks) before execution. 12. Daily construction reports must be kept. The forms from "zweckform - daily construction reports no. 177" or an equivalent must be used as a template. These must be presented to the construction supervisor every 2-3 days for signature and countersignature. The work carried out, the number of workers and the hours worked must be entered here. 13. Depending on the trade, the following documents must be enclosed with the final invoice in paper form and digitally (copied onto a CD or data carrier). These documents can vary depending on the trade. 1. Inventory plans for newly laid cables and connections with entries for basic and height dimensions as well as details of cable cross-sections, etc. 2. Working plans 3. Inventory plans 4. Building materials list for components with manufacturer, type, type number, colour, colour number, installation location 5. Fittings list for each movable part, otherwise as above 6. Pane sizes for windows, doors, etc., otherwise as above 7. General building approval for building materials 8. Certificates of conformity for products with list of each installation location, such as room names/numbers Final payment approval will only be given after the documents required have been submitted. 14. Acceptance A formal acceptance according to the Vob is expressly agreed. Acceptance through use is excluded. Acceptance requires that all services have been provided in accordance with the order letter or any subsequent order, the necessary acceptances have taken place without any significant defects and the documentation has been submitted at least once. 15. The work is scheduled to proceed as follows: See construction schedule in the appendix

Description: BOQ ITEMS: Clearing jungle including uprooting of rank vegetation grass brush wood trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. , Demolishing R.C.C. work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer in charge., Demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer in charge. In cement mortar, Earth work in excavation by mechanical means Hydraulic excavator manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. All kinds of soil., Excavation work by mechanical means Hydraulic excavator manual means in foundation trenches or drains not exceeding 1.5m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soils as directed within a lead of 50 m Hard Rock, Filling available excavated earth excluding rock in trenches plinth sides of foundations etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1.5 m, Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level 1 isto 3 isto 6 where 1 Cement 3 coarse sand zoneIII 6 graded stone aggregate 20 mm nominal size, Supply mix place in position compact and cure cement concrete 1 isto 2 isto 4 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size below foundations walls wells pits trenches etc. and in basin lining as per specifications drawings and directions of the Engineer incharge and including cost of centring and shuttering and cement., Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement All work up to plinth level 1 isto 1.5 isto 3 where 1 cement 1.5 coarse sand zoneIII 3 graded stone aggregate 20 mm nominal size , Brick work with common burnt clay F.P.S. non modular bricks of class designation 7.5 in foundation and plinth in Cement mortar 1 isto 6 1 cement 6 coarse sand, Centering and shuttering including strutting propping etc. and removal of form for Foundations footings bases of columns etc. for mass concrete, Steel reinforcement for R.C.C. work including straightening cutting bending placing in position and binding all complete upto plinth level Thermo Mechanically Treated bars of grade Fe500D or more, 15 mm cement plaster on the rough side of single or half brick wall of mix 1 isto 6 1 cement 6 fine sand Rates for external plastic are for height upto 10m from ground level in less otherwise stated, Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. for External work a. 15 mm dia nominal bore Preferable Make TATA or Jindal or as per direction of EIC, Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. for External work b. 20 mm dia nominal bore Preferable Make TATA or Jindal or as per direction of EIC, Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. for External work c. 25 mm dia nominal bore Preferable Make TATA or Jindal or as per direction of EIC, Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. for External work d. 50 mm dia nominal bore Preferable Make TATA or Jindal or as per direction of EIC, Providing and fixing gun metal gate valve with C.I. wheel of approved quality screwed end 20 mm nominal bore, Providing and fixing gun metal gate valve with C.I. wheel of approved quality screwed end 25 mm nominal bore, Providing and fixing gun metal gate valve with C.I. wheel of approved quality screwed end 50 mm nominal bore, Constructing masonry Chamber 30 into 30 into 50 cm inside in brick work in cement mortar 1 isto 4 1 cement 4 coarse sand for stop cock with C. I. surface box 100 into 100 into 75 mm inside with hinged cover fixed in cement concrete slab 1 isto 2 isto 4 mix 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size ic necessary excavation foundation concrete 1 isto 5 isto 10 1 cement 5 fine sand 10 graded stone aggregate 40mm nominal size and inside plastering with cement mortar 1 isto 3 1 cement 3 coarse sand 12mm thick finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S. non modular bricks of class designation 7.5, Constructing masonry Chamber 60 isto 60 isto 75 cm inside in brick work in cement mortar 1 isto 4 1 cement 4 coarse sand for sluice valve with C.I. surface box 100mm top diameter 160 mm bottom diameter and 180 mm deep inside with chained lid and RCC top slab 1 isto 2 isto 4 mix 1 cement 2 coarse sand 4 graded stone aggregate 20mm nominal size ic necessary excavation foundation concrete 1 isto 5 isto 10 1 cement 5 fine sand 10 graded stone aggregate 40 mm nominal size and inside plastering with cement mortar 1 isto 3 1 cement 3 coarse sand 12 mm thick finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S. non modular bricks of class designation 7.5, Constructing masonry Chamber 90 into 90 into 100 cm inside in brick work in cement mortar 1 isto 4 1 cement 4 coarse sand for sluice valve with C.I. surface box 100 mm top diameter 160 mm bottom diameter and 180 mm deep inside with chained lid and RCC top slab 1 isto 2 isto 4 mix 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size ic necessary excavation foundation concrete 1 isto 5 isto 10 1 cement 5 fine sand 10 graded stone aggregate 40 mm nominal size and inside plastering with cement mortar 1 isto 3 1 cement 3 coarse sand 12 mm thick finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S. non modular bricks of class designation 7.5, Supply and laying of HDPE Pipe line 110mm dia complete in all respect as per direction of EIC

Details: Description Republic Of The Philippines Province Of Camarines Norte Municipality Of Mercedes Bids And Awards Committee Bids And Awards Committee Office, Lgu - Mercedes, Camarines Norte Invitation To Bid For Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte. The Local Government Unit Of Mercedes, Camarines Norte, Through The Trust Fund Intends To Apply The Sum Of Two Million Seven Hundred Twenty-five Thousand Two Hundred Sixty-six Pesos Only (php2,725,266.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte - Identification Number 401-24-11-1495/1496/1497/1498/1499. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Local Government Unit Of Mercedes, Camarines Norte, Now Invites Bids For The Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte As Follows: Item No. Qty Unit Description Lot 1 - Hardware Tools 1 1 Unit Air Compressor Machine, Motor: 1/2 Hp; No. Of Cylinder: 2; Phase: 1; Pressure: 85 Psi; Capacity 46 Liters; Approximate Dimension: 95-100cm (l) X 31-35cm (w) X 64-70cm (h); Weight: 47kg; Inflation Time: 53min; Air Displacement: 208l/min 2 1 Unit Air Spray Gun, Standard Nozzle:1.4mm, Pattern Width:180-250mm, Paint Capacity:600cc, Suitable For Finishing Coat, Optional Nozzle:1.3-2.5mm, Operating Pressure:2-3.5bar Air Cons:4.2-7.1cfm(119-200l/min)" 3 11 Set Angle Grinder Cutting Disk, 10 Pcs.per Set; Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8") 4 11 Unit Angle Grinder, Rated Input Power: 730w; Wheel Diameter: 4"; Rated Voltage: 220v; Frequency: 60hz; No Load Speed: 12,000 Rpm; Weight: Approximately 1.6kg; Grinding Spindle Thread: M10; Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h) 5 7 Pc Chipping Hammer, Item Weight: ‎atleast 13.8 Ounces; Product Dimensions: ‎11" (l) X 1" (w) X 7.5" (h); Material:, Genuine Leather Grip And Forged Steel 6 3 Set Circular Saw With Diamond Blade, 1400w, 185 Mm Blade, Spindle Lock With 24t Diamond Blade 7 3 Pc Claw Hammer, Head Weight: 16oz; Overall Weight: 17oz-23oz; Forged Steel Head; Smooth Face; Fiberglass Handle With Rubber Cushion; Overall Length: 12-14" 8 3 Pc Concrete Chisel, 10'' Forged Steel Chisel 9 3 Pc Crow Bar, 36" Long; Length Tolerance: +- 1/8; Forged Steel Carbon 10 1 Pc Electric Planer; Voltage: 220-240v; Input Power: 1050w; No Load Speed: 1600rpm; Planing Width And Depth: 82x3mm; Heavy Duty Aluminum Base; 11 1 Pc Framing Hammer, Handle Material: Alloy Steel; Item Dimensions: Approximately 16-17" (l) X 5.75-6" (w) X 1.5-2" (h); Item Weight: Atleast 1.4 Pounds 12 1 Unit Gasoline Marine 7hp Speed Type, Single Cylinder; 4 Stroke, Forced Air Cooling; Ohv Displacement (cc): 196 Compression Ratio: 8.5:1 Bore X Stroke (mm): 68x54 Min. Fuel Consumption;395/(kw.h) Valve Clearance: Input Valve: 0.10-0.15mm Idle Speed (rpm): 1400+-140 Max A.c. Output/rpm:3.8/3600 Noise Level:70db (a) Ignition System: Transistorize Magento Ignition Max Torque (n.m/rpm): 10.7/300 Starting System: Recoil Start (recoil Start/electric Starting) 13 10 Pc Hacksaw With Blade, Adjustable Aluminun Alloy Frame With Soft-grip Handle, 90" Adjustable Bladec Angle, 12 Inches (+/- 1/4") Bi-metal Hacksaw Blade, 24 Tpi 14 10 Unit Heavy Duty Corded Drill, Rated Input Power: 750w; Chuck Capacity: Upto 13mm; Drill Capacity: Metal (16mm), Wood (25mm), Masonry (12mm); Dimension: 268mm (l) X 69mm (w) X 192mm (h); Weight W/out Cable: Approximately 1.6-1.8 Kg; Spindle Collar Diameter Of 43 Mm 15 1 Pc Level, Box Beam Style, Material: Alluminum; Dimension: Approximately 24-24.5" (l) X 2-2.6" (w) X 1.2-1.5" (h); Weight: Atleast 0.8 Pounds 16 3 Pc Mashing Hammer, 3 Lb With Fiberglass Handle, Forged Steel Head 17 3 Pc Masonry Hammer, 800g Solid Rubber Head, Fiberglass Core And Bi-material Slip-resistant Handle, 18 3 Pc Masonry Hand Saw, 15" 380mm Carbon Steel 19 3 Pc Masonry Square, 24"x 16"aluminum, 1/8 '' Thick 20 3 Pc Mason's Level, 60cm Aluminum Reinforced Frame 21 3 Tube Mason's Line, #18 Braided Nylon, 500 Ft, 170 Lb Test 22 10 Set Metal Drill Bit Set, Material: High Speed Steel; 19pcs Per Set (1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm,7.5mm,8mm,8.5mm,9mm,9.5mm,10mm); Point Angle:118degree C; Standards: Din 338; Bit Geometry: Standard Twist Bit 23 8 Pc Meter Tape With Magnetic Hook, Blade Material: Nylon Coated Blade; Dimensions: 16ft (l) X 25mm (w) 24 7 Pc Mig Welding Pliers, Overall Length: Atleast 210mm; Material: High Carbon Steel; Handle Material: Thermoplastic Rubber 25 1 Unit Portable Hand Drill, Power Sourced: Battery Powered - 2pc 21 Volt 1500mah Lithium-ion Batteries; Maximum Rotational Speed: 1500 Rpm; Voltage: 21v; Amperage: 1.5 Amps; Chuck Size: 0.38"; Bit Heads Diameters: From 0.8mm - 10mm; Product Dimensions: ‎9.6" (l) X 2.1" (w) X 7.5" (h); Material: ‎plastic, Rubber, Metal; Item Dimensions: Approx. ‎9.6" (l) X 2.1" (w) X 7.5" (h); Item Weight: Atleast ‎2.5 Pounds; Item Torque: 330 Inch Pounds; Inclusions: 1x21 Volt Inspiritech Cordless Power Drill, 2x Rechargeable Battery, 1x English User Manual, 10x Self-drilling Drywall Anchors,10x Screwdriver Bits, 2x Double Ended Bits, 3x Drilling Bits, 1x Magnetic Extension Socket Bit Holder, 10x Anchors With Screws，1x One-hour Fast Charger, 1x Flexible Extension Shaft, 1x Carrying Bag 26 7 Unit Portable Welding Machine, Input Voltage: 220-240; Frequency: 50-60hz; Output Current: 10-220a; Led Display; No-load Voltage: 85v; Max. Output Current: 220a; Diameter Of Electrode: 1.6-3.2mm; Inclusions: 1 Pc Electrode Holder, 1 Pc Earth Clamp With Cable, 27 3 Pc Pull-push Rule, Blade Length 8m/26ft, Blade Width 1", High Impact Abs Case With Durable Rubber, Corrosion Resistant Tru-zero End 28 3 Pc Putty Knife, 3" Stainless Steel With Rubber Handle 29 1 Pc Roofing Hammer: Item Weight: ‎1.25 Pounds; Product Dimensions: Approx. 13.7" (l) X 6.75" (w) X 1.5" (h) 30 1 Unit Sander, Item Dimensions: Approx 11.63" (l) X 5.63" (w) X 6.19" (h); Voltage: 110 Volts; Power Source: Corded Electric; Amperage Capacity:‎ 8.8 Amps; Variable Speed Control Dial (690 -1,440 Ft./min.); Grit Number: 80; Item Weight: Atleast ‎9.5 Pounds; Included Components: ‎belt Sander, 1 Belt, Dust Bag 31 3 Pc Shovel, Rectangular End, Tempered Steel Blade (0.8mm Gauge Orv Higher), 17-23 Cm Blade Tip Width,22-28cm Blade Tip Lenght, All Metal Handle, Overall Lenght 100cm-115 Cm 32 3 Pc Shovel, Round End, Tempered Steel Blade (0.8mm Gauge Orv Higher), 17-23 Cm Blade Tip Width,22-28cm Blade Tip Lenght, All Metal Handle, Overall Lenght 100cm-115 Cm 33 1 Pc Speed Square, Material: Cast Aluminum; Size: About 18x18x2cm/7.09x7.09x0.79"; Weight: About 130g; Triangle-shaped 34 3 Pc Spirit Level Bar, Aluminum Frame With Magnet, Size 12" (+-1/8"), With 3 Vials (horizontal, Vertical And 45 Degrees) 35 3 Pc Steel Float/plastering Trowel, Thickness 0.7 Mm, Surface Measurement 280mm X 125 Mm(+/- 1mm), High Carbon Steel, Soliod Forged Steel With Plastic Handle 36 1 Pc Trim Hammer, Handle Material: Wood; Head Material: Alloy Steel; Item Dimensions Approximately: 14-15" (l) X 5-6"(w) X 1-2" (h); Item Weight: Atleast 594 Grams 37 3 Pc Trowel, 280x120mm Stainless Plastering Trowel With Plastic Handle 38 1 Pc Utility Knife, Handle Material: Aluminum; Material: Aluminum Alloy; Weight: 120g/pcs; Blade Size: 19mm (w) X 61mm (h) X 0.6mm (t); Blade Material: Steel; Thickness: Atleast 0.6mm 39 7 Pc Welding Helmet, Auto Darkening Helmet, Power Supply: Battery And Solar Powered; Light Shade: Din9-1;, Dark Shade: Din4; Switching Time: 1/25000s; Delay Time: 0.1-0.8s; Sensitivity Adjustment: Stepless Control; Operation Temperature: -5 Degrees- 55 Degrees; Active Viewing Area: 93mmx43mm; Active Viewing Area Size: (+/- 10mm); Item Weight: Atleast 1.85 Pounds; Package Dimensions: ‎approximately 12-12.4" (l) X 9-9.61" (w) X 7-7.68" (h) 40 7 Set Welding Magnets, 6 Pcs/set, Overall Length: Atleast (3"); Hold Capacity: Up To 25lbs; Arrow Design Supports Angle: 45°, 90°, And 135°; Item Weight: 295g; Package Dimensions: ‎4.88 X 4.72 X 3.98 Inches; ‎material: Steel; Magnets Size: Approximately - Top (1-1.4cm), Bottom (6.5-7cm), Side (7-7.5cm) Thickness (1-1.3cm) 41 1 Set Wood Chisel; 4-piece Set (6mm; 12mm; 19m; 25mm); Tempered Chrome Carbon Steel Blade; Hardened Shank; Rust-resistant, Lacquered Coated Blade; Bi-material Handle 42 3 Pc Wooden Float, 18"x 32", Multi-layered Lot 2 - Food Preparation 1 1 Unit 3 In 1 Burger Griller With Deep Fryer And Steamer, Gas Type; Made Of Stainless Steel And Polished Metal Griddle Plate; Dimensions: Burger Griddle - 18" (l) X 12" (w); Deep Fryer - 8" (l) X 12" (w), Capacity: 2.5 L; Steamer: 11" (l) X 12" (w) 2 6 Unit Barbeque Grill With Sauce Holder And Top Grill, Material: Stainless Steel, Dimension(lwh): 24 In X 12 In X 30 In (3.5 In Grill Pan's Depth) 3 33 Pc Basin; Stainless; Diameter: 22"; Base: 16"; Depth: 7"; Thickness: 1cm 4 47 Pc Beach Umbrella; Round-shaped; Material: Poly Canvass; Diameter: 40""; Pole Stand Length: At Least 45""; Pole Material: Stainless Steel Chrome" 5 6 Pc Boiler Caldero; Big Size & Heavy Duty; Size: Diameter 48cm; Height: 42cm; Makapal, Material: Aluminum 6 6 Pc Boning Knife, 27.3cm, Blade Length:14.6cm, Blade Thickness: 4mm, Wood Handle 7 32 Pc Butcher's Knife; Materials: Stainless; Wood Handle; Size: About 10" 8 29 Pc Caldero With Double Handle; Aluminum Material; Diameter: 46cm; Height: 37cm; With Double Handle; Capacity 5kilos/20l(volume Capacity) 9 48 Set Casserole Set, Stainless Steel, 28, 30 And 32cm Diameter; 16, 18, 20cm Height 10 50 Pc Chef's Knife; About 10 3/4" Long; Material: Stainless Steel; Blade: Full Tang; Riveted Handle 11 56 Pc Chest Cooler, Item Package Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h), Package Weight: ‎5.76kg, Inside Dimensions: 24.95" (l) X 14.58" (w) X 14.77" (h), Material: ‎plastic, Chamber Depth: 24.95", Capacity: 52l, Color: Any Color 12 51 Pc Chopping Board; Thick Wood; 12"x12" 13 6 Pc Cleaver Knife, 11" Stainless Steel, Weight: 310-340g, Blade Size: 6.5 Inches 14 48 Pc Colander; Stainless Steel; 11"diameter; With Stainless Base And Handle 15 6 Unit Digital Weighing Scale ,30kg Capacity,stainless Tray Size: 35x23cm For 30kg Capacity Weighing Scale, Dual - Display : Weight, Unit Price, Amount, High Light Led Display, Rechargeable Battery, Power Supply: Ac/dc Charger (included) 16 47 Unit Double Burner Gas Stove; Stainless Top And Front; Automatic Ignition; Reversible Trivet; Double Detachable Top Burner; Removable Drip Pan; Dimension: 700mm(l) X 390mm(w) X 140mm(h) 17 7 Unit Double Ring Burner; Heavy-duty Cast Iron; Includes Pol Regulator And 1-metre Hose 16750 Btu Brass Valve With Individual Gas Control Minimal Assembly Required Weight; 3.9kg, Material;cast Iron, Dimensions: (lwh) 36cm X 20cm X 9cm, Fuel Type: Lpg Tank Cylinder With Content And Accessories 18 2 Pc Egg Ring, Stainless Steel, 8.5cm Diameter, 1.5cm Height 19 4 Box Face Masks; 3 Ply Non-woven Disposable Earloop Mask; Quantity: 50pcs/box 20 30 Pc Fish Drying Rack, 4-layer, 45x45x66cm, Foldable 21 6 Pc Fish Scaler, 20cm Stainless Steel 22 6 Pc Fish Scraping Tool, 20cm Stainless Steel 23 54 Unit Food Shelve, 2 Layers: Glass Thickness: 3/16 And 1/4, (w-14" X H-17" X L-30"); Adjustable Layer, Material: Glass & Aluminum With Sliding Door, Offer: Screen Sliding Door To Prevent Moisture 24 204 Pc Food Tray With Glass And Stainless Lid/cover, Stainless Body, Rubberized Stand 32x28x10cm 25 12 Pc Food Tray, Flat, Stainless, 60x40x2cm, Depth: 2cm 26 2 Unit Freezer Chest Type, Gross / Net Volume 10.6 Cu.ft. (10 Liters) / 10.1 Cu.ft. (286 Liters), Functionality 3-in-1 Function – Chilling | Freezing | Fast Freezing, Defrosting System: Manual Defrost, Evaporator:aluminum Defrost,led: 6 Led’s, P:2w, Lamp Life: Min. 50,000 Hours, Weight 40 Kg, Dimensions L 63 X W 111.4 X H 84.7 (cm), Key Features: Inverter Compressor, Sliding Glass Door, Embossed Door & Cabinet, Recessed Side Handle (left & Right), Led Light, Removable Gasket , 1x Basket Wire Shelf, 4x Roller Wheel 27 5 Pc Fruit Crate Plastic 21 X 15 X 12 Inches, Heavy Duty Plastic Material, Color : Black 28 37 Pc Frying Pan 14" In Diameter, Cast Iron 29 4 Unit Gas Range, Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h); 4-gas Burner; 62l Gas Oven; Button Ignition; Top Glass Lid; Net Weight: Maximum Of 28kg; Pan Support: Light Cast Iron Pan Support 30 1 Box Gloves; 100pcs; Food Grade; Size: Medium(7.5cm); Thermoplastic Elastomer(tpe) Material 31 23 Pc Hairnet With Cap; White; Nylon; Washable 32 1 Unit Industrial Oven Stainless Steel, With Wall Insulator To Minimize Penetration Of Heat To The Walls, With Temperature Gauge, Approx. Outer Dimension: 46.5 X 23.5 X 30 Inches; Oven Stand/rack Is Made Of Metal With Rollers And Braking Systems; Stainless Steel Front Panel, With See Thru Glass; About 4 Inch Thickness Of Walls With 2 Trays Per Deck - 4 Trays Capacity; Gas Type 33 35 Pc Kawa 62 Cm Diameter 18 Cm Height, Aluminum With 2 Aluminum Handles 34 12 Pc Kitchen Apron, Waterproof; Stain Resistant Leather Apron 35 6 Pc Kitchen Scissors, Material: Stainless Steel And Plastic Silicone, Size: 22.5x7.3x1.2cm 36 3 Pc Long Handle Stainless Steel Soup Spoon; Color: Silver; Caliber Length; Approx. 12cm.14cm.16cm.18cm, Handle Length; Approx.45cm(17.72inches) 37 6 Pc Long Wooden Ladle; 14" Stainless Steel 38 58 Set Lpg Tank, 11kg Cylinder With Gas Regulator, 1.8m Hose & Steel Hose Clamp 39 9 Set Measuring Cup (set For Liquid), 1 Measuring Cup With Red Graphics; Made Of Nonporous Glass That Won't Warp, Stain, Or Absorb Odors; Glass Is Preheated Oven, Microwave, Fridge, Freezer & Dishwasher Safe; Dimension: Approx. 7.13" (l) X 6.75" (w) X 4.38" (h); Measuring Capacity: 500ml 40 9 Set Measuring Cups (set For Dry), Smithcraft Stainless Steel Measuring Cups Set Have 8 Cups.the Sizes Are: 1 Cup (240ml), 3/4 Cup (180ml), 2/3 Cup (160ml), 1/2 Cup (120ml), 1/3 Cup (80ml), 1/4 Cup (60ml), 1/8 Cup (30ml), 1/16 Cup (15ml),1 Locking Ring. 41 6 Unit Mini Electric Fan 7.5" - With Base 10'' 69hz 20w (for Bbq), Non-adjustable Height; Any Color; Electric Powered Fan; 3 Blade 42 21 Pc Mixing Bowl Medium, Approx. Diameter: 28cm, Height:11.2cm; Material: Stainless; Capacity: Atleast 4l 43 200 Pc Monoblock Chair Front:monoblock Chair, Front Legs Distance: 355mm Width Seat, With Backrest, Color: Beige, Seat Width :375 Mm, Deapth: 330 Mm, Side Legs Distance Left: 378 Mm, Side Legs Distance Right 378 Mm, Back Legs Distance: 210 Mm, Back Rest Height:779 Mm, Set Back Height: 405 Mm, Seat Height: 376 Mm, Gross Weight: 2.25 Kgs 44 54 Pc Monoblock Table, 36x36 Inches, H- 28 Inches, Color: Beige, Atleast 3mm Thick 45 2 Pc Non-slip Rectangular Chopping Board; Materials:polypropylene Plastic; Approx Length: 40cm; Width: 25cm; Thickness: 0.5cm; Color : White 46 45 Pc Palamigan Container W/ Gripo 15l, Dimension: 31.8x23.8x48.5cm, Material: High Quality Durable Plastic 47 1 Unit Pressure Cooker 50 Liters Capacity, Aluminum Alloy Material, Pressure: 90kpa, Dimension: 44cm Diameter X 47cm Height 48 40 Pc Round Glass Jars With Lid, 220ml 49 41 Pc Sandok, Stainless Steel, 24.7" Length, With Wooden Handle 50 33 Pc Sandok, Stainless Steel, Length: 14" 51 39 Pc Shansi, Stainless Steel, Length: 14" 52 9 Pc Stainless Steel Dough Cutter Scraper Baking Smoother Cake , Approx. Size: 14-15cm (l) X 11.5-12cm (w) And 22cm (h); Material: Stainless Steel 53 41 Pc Stainless Steel Food Tong 14" Length 54 5 Unit Steamer; Aluminum; About 16"/42cm Diameter; 3 Layers With Cover; With Handle Per Layer 55 3 Unit Vacuum Sealer Machine, 220v, 90w, Sealing Width: 270mm, Power Supply: Ac100-240v/50-60hz, Temperature Control Range: 170-210 Celsius, Abs Material, Size: 370*75*50 (mm) 56 15 Pack Vacuum Sealer Storage Pouches | Bpa Free, Commercial Grade For Food Storage & Sous Vides, Size: 17 X 25cm Material: Plastic, 100pcs/pack 57 27 Pc Water Jug/dispenser With Faucet, 5 Gallons, 20 Liters, Color: Blue, Durable And High Quality Plastic Material 58 7 Unit Weighing Scale; Analog; 20kg Capacity; Approx. Dimensions: 6-7" (l); 8-9" (w); 10-11" (h); Dual Unit (kg And Pounds) 59 2 Pc Wide Mouth Funnel, Stainless Steel, Top Opening: At Least 17 X 5.5 X 6cm, Bottom Opening: At Least 13 X 3.7 X 4cm 60 8 Pc Wire Whisk, Large, Stainless, Approx. 14-15" (l) Lot 3 - Fabrication Of Food Cart 1 7 Unit Bicycle With Sidecar: Bicycle Specifications: Bmx Type Bike (frame 1//2 Gi Hd, Rim Set Front X 10 G Wide Jap Hub, Rim Set Rear X 10g Wide Jap Hub, Tire 20 X 2.125 Jumbo, Tube 20 X 2.125, Handle Bar Painted Black, Fork Ex-900 Landing Gear Cp, Head Parts Nikyo/whw, H-post Bmx Ord.m, H-grip Ord. Opc Parts Neco Bearing Type, Opc Plate 36t, Chain Cp Bmx, Freewheel 24t, Pedal Opc Bearing Type, Seat Clamp/s-pin/ S-post P, Saddle With Spring, Footbreak With Spring "full Size" Frame, 175-180mm Cranks Side Car With Provision Of Umbrella And 2 Chest Coolers (52l Capacity) - Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h) Materials: 1/2 J1 Pipe 540, 316 X 1 Flat Square Bar, J1 Pipe De Una 520, 1/4 X 2 Flat Bar, 6203 Gi Set, Tire 20 X 2.125 Jumbo, Note: With Dole, Dilp Logo Fully Painted In A Galvanized Sheet Iron Attached On The Front Of The Sidecar With Approx. 15.7 Inches(h)x15.7 Inches(l) Fully Painted Color: Any Color 2 1 Unit Motorcycle Sidecar (for Fruits And Vegetable Vending): Metal Body, Dimensions L-4ft W-2ft H-2ft, With 17inch Side Wheel 3 11 Unit Negocart With Bicycle Roofing Materials: Bolt & Nut W/ Washer 3/16 X 1 Polycarbonate 6mm X 1.2 X 1.70 Welding Rod Body Materials:tubular 1 X 1 X 1.5;flat Bar 1/8 X 1;flat Bar 2' X 3/8 X 1;plain G.i.;sheet 4' X 8' #26;cylindrical Hinge 1/2" ᴓ;blind Rivets 1/8 X 1/2;cylindrical 1/2;cabinet Handle;cabinet Lock;round Bar 8mm ᴓ;transparents Barrier 1/4 X 4' X 8';welding Rod;stainless Sheet 4' X 8';plain Round Bar 16mm ᴓ: Bicycle Specs: Bmx Type Bike Frame, Front And Rear Free Wheel Hub For Rim Set Single Speed (wheel Set), Tire Size (20"x2.125 Jumbo), Interior Tube (20"x2.125), Bmx Handle Bar, Bmx Fork, Head Parts (h Post, Handle Grip), Chain (single Speed), Pedal (bearing Type), Seat Clamp, Saddle With Spring, Foot Brake (clamp W/ Spring), Crank Pedals (175mm-180mm Cranks) Note: With Dole, Dilp Logo And Tourism Spot At The Front And Side Of Cart, Logo Material: Weather Proof Sticker, Sizes Of Sticker: H-60cm X W-130cm (for Front Of Cart) And H-60cm X W:75cm (for Side Of Cart) Or H-23.6" X W-51" And H-23.6" X W-29.5" Fully Painted Color: Light Blue Lot 4 - Grooming Tools 1 1 Pc All Purpose Comb, 7inch, Plastic Material 2 3 Pc Barber Apron, With Two Pockets, Waterproof, Material: Fiber Size: Approximately 89x69cm - 35x27.2 Inches 3 1 Pc Barber Cape, 140cmx100cm Silk, Waterproof 4 1 Unit Barber Chair, Reclining, Modern Style, Chair Back Height: High-back; Upholstery: Faux Leather; Material: Stainless Steel; Dimension: 21"x22.5"x38" 5 1 Unit Clipper, Cordless, Includes 3 Metal Clip Attachment Comb Cutting Guides, 1/16", 1/8",3/16, 6.25 Inches And Weighs 13 Oz, Equipped With A 2191 Adjustable 0000 Blade 6 2 Unit Curling Iron, 38.5cm, Tourmaline Ceramic, 25-39w, 360 Degree Rotatable 7 2 Set Eyebrow Grooming Kit, 6pcs (2 Eyebrow Razor, 1 Facial Razor, 1 Brush, 1 Scissors, 1 Tweezer) 8 1 Pc Fade Brush, Material: Plastic & Nylon, (hxw) 12.3 X 2.3 Cm, Weight: 0.015 Kg 9 2 Unit Flat Iron, Ceramic Wide Plate, 100-240v Dual Votage, 40-59w, 27.8cm Long 10 2 Unit Hair Blower, 2 Speed - 3 Heat Settings, 2400w, Removable Filter Cover, Cool Shut Function, Dimension: 21.5x8.5x26.5cm 11 1 Set Hair Clips, Plastic, Size: Approximately 7.8cm 12 2 Set Hair Dying Tool Set, (5-pc) Small Brush - 19.5cmx4.5cm, Big Brush - 20.5x6cm, Secondary Comb - 19x5.5cm, Small Bowl - 13x4.5cm, 1 Pair Of Earmuffs 8x4.5cm 13 3 Pc Hair Shear, 6.9 Inch Stainless 14 10 Pc Hair Towel Turban, 49x18cm Microfiber 15 2 Set Make Up Brush Kit, 12 Pcs With Box 16 2 Set Make Up Kit, 35pcs (1 Eyeshadow, 1 Concealer, 4 Osmetic Brush, 3 Lipgloss, 1 Eyebrow Pencil, 1 Pressed Powder, 4 Lipstick, 4 Face Makeup, 1 Lip Balm, 1 12.5cmx19cm Makeup Bag, 1 Eyebrow Cream, 1 Primer, 1 Powder Puff, 1 Mascara) 17 2 Pc Makeup Kit Organizer, 50cmx39.5cmx21.5cm, Black,046 Glittery, Checkered 18 1 Pc Mirror, Double Sided Folding Mirror, (wxh) 24x 37cm, Weight: 0.532 Kg 19 1 Pc Neck Duster, Weight : 100g , Size : 18x7x7cm 20 1 Roll Neck Strips, (28cmx6.5cm) Self Adhesive, Material: Paper 21 4 Set Plastic Hair Roller, 25mm Assorted, 10-pc Large 22 3 Pc Pomade, 80g, Water-based 23 1 Pack Razor Blades, Durable, Stainless, 100 Pcs, (lxwxh) 14x10x1 24 1 Set Shaver, Abs Material,110-220v, Power: 3w, Size: 16.6x5.8cm, Battery Capacity: 600mah 25 2 Pc Shaving Gel, 195g With Aloe 26 2 Pc Talc Powder, 500g 27 1 Set Trimmer, Rechargable, 2 Blades, Power: 50-60 Hz, Voltage:100-240v, Dimension: 11.5x6.5x3cm 28 4 Pc Wide-tooth Comb, 16cm Plastic, Durable 29 1 Pc Wide-tooth Comb, Size: Approximately 21.5x5 Cm, Plastic Material Lot 5 - Sewing 1 7 Set Ball Point Pins, 250 Pcs Per Box With 8 Colors; Durable 2 8 Unit Bobbin Case, Diameter: 20.3mm Width: 11.7mm 3 8 Pc Bobbin, Diameter: 20.3mm Width: 11.7mm 4 4 Set Dressmaker's Shears, Material: Stainless Steel; Item Dimensions: Approximately 0.8" (l) X 3.9" (w) X 10" (h); Blade Length: 8"; Item Weight: Approximately 8.8 Ounces 5 1 Pc Edging/ Overlock Sewing Machine, Metal Material; Overlocker; 1 Stitch; Dimension(lxwxh) 12x13x14 6 3 Pc Electric High Speed Sewing Machine, Power: 90w; Rated Voltage: 220v; Gross Weight: About 7kg; Max Sewing Speed: 1,100 Stiches/min; Materials: Stainless Steel Needle Plate, Metal Frame; Dimensions: Approximately 44cm (l) X 16cm (w) X 28cm (h); Voltage: 220v, Secondary Lifting Height Or Presser Foot: 14mm; Needle Pitch: From 0-4.5mm, Needle Width: From 0-7.0mm 7 4 Pc Flat Iron, 1200w; Stainless Steel Sole Plate; Power Light Indicator; With Steaming/spray Function 8 4 Set French Curve, Dimension(21.65x0.39x7.09); 4.6 Ounce; Made Of Aluminum Or Plastic 9 4 Pc L-square, Material: Stainless; Item Weight: 0.32oz; Product Dimensions: Approx. 14" (l) X 24" (w) 10 1 Pc Manual Sewing Machine With Motor And Foot Controller, Metal Material, Heavy Duty, 9kg Weight, 1 Stitch Dimensions, (lxwxh) 12x13x14 11 4 Unit Meter Stick, Yellow Color; Wood Type 12 4 Pc Needle Threader, Metal Material; Oval Shape; 1 Inch Size 13 31 Pack Sewing Machine Needle, Flat Needles 10pcs/pack 14 11 Pc Sewing Threads 12pcs/box, Material: Cotton; Package Dimensions: Approx. 5.71" (l) X 3.74" (w) X 2.36" (h); Thread Size: Approx. 56mm (h) X 22mm (w); 550 Yards Each Roll 15 25 Pc Tailor’s Chalk, Square Shape; Orange Color;fades Or Brushes Away Easily 16 4 Pc Tape Measure, Material: Durable Soft Plastic; Color: Blue; Measurements: Inches (can Measure Upto 60") And Centimetres (can Measure Upto 150cm) Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 2. Delivery Of The Goods Is Required Ninety (90) Calendar Days Delivery Period And Upon Receipt Of Notice To Proceed And Purchase. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Local Government Unit Of Mercedes, Camarines Norte-bac Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours - 8:00 Am-12:00 To 1:00 Pm-5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 14, 2024 Until 8:30 Am Of January 6, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only Php5,000.00. 6. The Local Government Unit Of Mercedes, Camarines Norte Will Hold A Pre-bid Conference On December 23, 2024 9:00am At Bids And Awards Committee Office- Second Floor Jpl Sports Complex - Municipal Compound, Eco Avenue Street, Barangay 5, Mercedes, Camarines Norte Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below, On Or Before 8:30am January 6, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 9:00 Am Of January 6, 2025 At The Bids And Awards Committee Office- Second Floor Jpl Sports Complex - Municipal Compound, Eco Avenue Street, Barangay 5, Mercedes, Camarines Norte. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 10. The Local Government Unit Of Mercedes, Camarines Norte, Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Macario B. Totanes Municipal Planning And Development Office Lgu Mercedes Municipal Compound, Barangay 5, Mercedes, Camarines Norte 0998-576-8321 Arsenia M. Ordiales Bac Secretariat Bids And Awards Committee Office 2nd Floor Jpl Sports Complex, Lgu Mercedes Municipal Compound, Barangay 5, Mercedes, Camarines Norte 0908-896-9684 Email Address: Lgubac.mercedes@yahoo.com 12. You May Visit The Website: For Downloading Of Bidding Documents: Www.mercedes.gov.ph December 13, 2024 ________________________________ Macario B. Totanes Bac Chairman